battery of 12v is connected two series combination of restisator 3 ohm law 4 ohm law 5 ohm law how much current would flow through 12 ohm law resistance
Answer:
1 A
Explanation:
The total resistance of a circit in series is the added amount of individual resistants which is 3+4+5=12 ohms
According to Ohms's law, V=IR
V=voltage
I=current
R=resistance
12=12I
I=1 A
The current flowing through the 12 ohm resistor is 1 ampere.
Explanation:To find the current flowing through the 12 ohm resistor, we need to first find the equivalent resistance of the series combination of resistors.
The total resistance (Rtotal) is calculated by adding the individual resistances (R1, R2, R3) in the series combination:
Rtotal = R1 + R2 + R3
Substituting the given values:
Rtotal = 3 ohms + 4 ohms + 5 ohms = 12 ohms
Using Ohm's law, we can calculate the current (I) flowing through the 12 ohm resistor:
I = V / Rtotal
Substituting the given voltage (V = 12V):
I = 12V / 12 ohms = 1 ampere (A)
Therefore, the current flowing through the 12 ohm resistor is 1 ampere.
What type of reaction occurs when an egg cooks in a pan?
Answer:
exothermic
Explanation:
energy is absorbed by the surroundings
Answer:
endothermic, because energy is absorbed from the surroundings
Explanation:
What is the name of the aluminum ion?
Answer:
Aluminum ion is [tex]Al^{3+}[/tex]
Explanation:
Ions are formed due to the gain or loss of one or more electrons. There are two types of electric charges.
1. Positive charge
2. Negative charge
If an atom contains number of positive charges greater than the negative charges, its becomes positively charged. Also, if an atom contains number of negative charges greater than the positive charges, its becomes negatively charged.
We need to write the name of aluminium ion. The atomic number of Aluminium is 13. Its electronic configuration is, [tex]1s^22s^22p^63s^23p^1[/tex].
So, Aluminum ion is [tex]Al^{3+}[/tex]. Hence, this is the required solution.
The name of the aluminum ion is "aluminum ion" with a 3+ charge.
In chemistry, when an atom of aluminum loses three electrons, it becomes a positively charged ion known as the aluminum ion. Aluminum, as an element, is represented by the symbol Al and has an atomic number of 13, meaning it has 13 protons and 13 electrons in its neutral state.
When aluminum loses three electrons, it forms an aluminum ion with a 3+ charge. This happens because the number of protons (positive charges) remains the same, while the number of electrons (negative charges) decreases. The resulting positive charge on the ion signifies its ability to participate in various chemical reactions.
Aluminum ions play a crucial role in many industrial processes, particularly in the production of aluminum metal from its ore, bauxite. Additionally, they are essential in various chemical applications, including the manufacturing of aluminum-based products, catalysts, and electronics.
To know more about ion here
https://brainly.com/question/29183072
#SPJ6
An input force of 7 N is applied to a machine with a mechanical advantage of 1.75. What is the maximum the machine could lift?
12.25 N
7N
7.25 N
26.2 N
[tex]F_{max}=7N\cdot1.75=\boxed{12.25N}[/tex]
Hope this helps.
r3t40
1.33 sin 25.0°=1.50 sin
Studying the effect of one thing on another in order to test a hypothesis is a(n) ____.
Answer:
experiment
Explanation:
An organized procedure for testing a hypothesis that tests the effect of one thing on another under controlled conditions is called an experiment
Studying the effect of one thing on another in order to test a hypothesis is an experiment,
What is the scientific claim?Scientific claims are statements made in science based on an experiment.
These Scientific claims are backed by experimental data and their true results obtained from scientific investigation and experimentation.
When it comes to testing a hypothesis, you can think about what precisely you should think about when it comes to how you should test a hypothesis. You might be curious what this is actually called. We refer to this as an experiment.
The popularly accepted scientific method may be thought of as a technique used to test a hypothesis to see if it is true or incorrect. If the experiment is successful, the hypothesis will then become a conclusion once the data has been examined.
Thus, studying the effect of one thing on another in order to test a hypothesis is an experiment,
Learn more about the scientific claims, here
brainly.com/question/11088441
#SPJ2
what do scalars measure
force
acceleration
magnitude
velocity
magnitude.
scalars are units that has magnitude only
vectors have both magnitude and direction
Answer:
The answer is C, the magnitude.
Explanation:
Because force, acceleration and speed are all vector quantities. That is, to represent them not only reaches a number, but it takes an address, meaning, etc.
Instead a scalar magnitude (for example: temperature, mass) requiere for representation of a single value.
Which of the following are appropriate acceleration units?
Answer:
meters per second squared is the appropriate units for acceleration units.
The purpose of carbohydrate loading is to
A. make protein stores available for energy.
B. deplete glycogen stores.
C. maximize glycogen stores.
Stress hormones tend to increase the metabolic needs of the body because they
A. increase the use of insulin.
B. "can accelerate heart rate, increase muscle tension, elevate blood pressure, cholesterol, and triglyceride levels."
C. reduce the amount of glycogen stored in the muscles.
Which energy system has a short-lived supply of fuel and is released in high-intensity events?
A. The ATP-CP system
B. The aerobic system
C. The sprint pathway
Answer:
Carbohydrate loading, commonly referred to as carb-loading or carbo-loading, is a strategy used by endurance athletes, such as runners, to maximise the storage of glycogen (or energy) in the muscles and liver. C. maximize glycogen stores.
Explanation:
Answer:
C. maximize glycogen stores.
Explanation:
1
A ball is projected vertically upwards at t = 0. The
ball is at same height at time 4 s and 8 s. The
maximum height attained by the ball is
(g = 10 m/s2)
(1) 120 m
(2) 80 m
(3) 180 m
(4) 100 m
Answer:
(3) 180 m
Explanation:
y = y₀ + vt − ½ at²
where y is the final height,
y₀ is the initial height,
v is the final velocity,
a is acceleration,
and t is time.
Given y₀ = 0 and a = -10.
y = vt + 5t²
At maximum height, v = 0:
y = 5t²
The ball reaches the same height at 4s and 8s, so the peak is in the middle at 6s.
y = 5(6)²
y = 180
The ball reaches a maximum height of 180 m.
an applied force of 50N is used to acclerate an object to the right across a frictional surface. The object encounters 7 N of friction. If the object weighs 8N how fast is it acclerating?
Which of the following is the main energy source for the sun?
A. fission of hydrogen
B. fusion of hydrogen
C. fusion of helium
D. fission of iron
Answer: the naswer is A. hope i helped
Final answer:
The main energy source for the Sun is the fusion of hydrogen into helium, a process that takes place at the core under extreme temperatures and pressures. This fusion releases vast amounts of energy much greater than energy from fission or chemical reactions. The transformation of mass into energy in the Sun's core is the key to its consistent and long-term energy output. So the correct option is B.
Explanation:
The main energy source for the Sun is the fusion of hydrogen into helium. This process occurs at the core of the Sun, where temperatures reach about 14 million kelvin. The net reaction of fusion in the Sun can be summarized as the transformation of four protons, or hydrogen nuclei (^1H), into one helium nucleus (^4He), releasing significant energy in the form of two positrons, two neutrinos, and gamma rays. The energy produced from this nuclear fusion is much greater than the energy from nuclear fission or chemical reactions such as the burning of fossil fuels.
The fusion process in the Sun involves a series of reactions known as the proton-proton cycle. The core's extreme temperature and pressure allow protons to overcome their natural repulsion and collide, fusing into deuterium (hydrogen with one neutron), and subsequently into helium. During this fusion, mass is converted into energy, as described by Einstein's famous equation E=mc^2. This makes the fusion process highly efficient in releasing energy.
The energy released from fusion diffuses slowly from the Sun's core to its surface, except for neutrinos that escape immediately. This slow process of energy diffusion and the escape of neutrinos contribute to the stable energy output of the Sun. It's a continuous process that supports the Sun's longevity as a source of heat and light for the solar system, manifesting as the sunlight we receive.
Ca(OH)2 is__
An acid
A base
A salt
Answer:
Explanation:
An acid has H as the metal as in HCl
A base has OH as the nonmetal. (so Ca(OH)^2 is a base)
A salt has neither.
What type of circuit is illustrated?
A.closed parallel circuit
B.Closed series circuit
C.open series circuit
D.Open parallel circuit
Answer:
I beleive its B
Explanation:
If not then A but I'm positive its B
The softest and hardest minerals are: softest hardest
Answer
Softest mineral-Talc
Hardest mineral- Diamonds
Explaination
Talc is the softest mineral and has a value of 1.
Diamond, the hardest of all minerals, has a value of 10.
Answer:
Softest mineral-Talc
Hardest mineral- Diamonds
Explanation:
What happens when an atom gives up loosely held valence electrons to another atom
Answer:
The number of valence electrons increases to 8 or, the atom gives up loosely held valence electrons.
Explanation:
Please mark brainliest and have a great day!
In this experiment, you will use a track, a toy car, and some washers to explore Newton’s first two laws of motion. You will make observations and collect data regarding the motion of these objects. In the space below, write a general scientific question that you will answer by doing this experiment.
Answer:
FORCE= MASS*ACCELERATION
Explanation:
By doing the experiments with track, toy car and some washers we can verify our first two Newton's laws.
When we run on a track or we run this car on the track, we need an external force to run the car and we again need an external force to stop that car. This verifies the law of inertia that a body do not want to change its mode.
And we will also verify that the amount of force applied on the body is directly proportional to the mass of the body and its acceleration.
A relevant scientific question for the experiment would be how Newton's first and second laws of motion affect the toy car's movement and the forces it experiences with varying additional masses (washers). Newton's first law, the law of inertia, dictates the car will remain at rest or continue at a constant speed unless an external force acts upon it. Newton's second law predicts the car's acceleration will be proportional to the force applied to it.
Explanation:A scientific question for the experiment could be: 'How do Newton's first and second laws of motion affect the movement and forces acting on the toy car when varying amounts of washers (increased mass) are added?'
According to Newton's first law of motion, also known as the law of inertia, an object will remain at rest or continue moving at a constant speed in a straight line unless acted upon by an external force. This means the toy car should stay at rest until you apply a force to set it in motion.
Newton's second law says that the change of motion (acceleration) of a body is proportional to the force acting on it and happens in the direction of the force. Thus, when applying different weights (washers), you are applying different forces which should result in different accelerations of the toy car.
Learn more about Newton's Laws of Motion here:https://brainly.com/question/38603068
#SPJ11
Convection occurs when thermal energy is transferred by the movement of _______
Answer:
Convection occurs when thermal energy is transferred by the movement of fluid particles.
Explanation:
Transfer of heat energy by the movement of fluid particles is called convection. Convection takes place in liquids and gases due to kinetic energy. When heat is provided to liquids and gases they expand and move faster.
Molecules with higher kinetic energy become less dense and rise up to the surface of liquid, whereas molecules with lower energy move towards the bottom. This up and down movement of molecules causes convection currents in fluids.
Answer:
Convection occurs when thermal energy is transferred by the movement of fluids.
Explanation:
Convection is one of the three forms of heat transfer (conduction, convection and radiation) that transports heat between zones with different temperatures. Convection itself is the transport of heat through the movement of fluid. For example, when heating water in a saucepan, the water in contact with the base of the pan rises, while the water from the surface descends and occupies the place left by the hot one.
A combination reaction is when two or more _____ combine to form one product. A decomposition reaction is when a substance breaks down into two or more simpler substances in a chemical reaction.
Answer:
elements
Explanation:
Answer:
Reactants
Explanation:
A combination reaction is usually defined as a type of chemical reaction in which two or more reactants are fused together to form a single product. For example, The two elements Hydrogen and Chlorine are linked together to form Hydrochloric acid.
This can be written as,
H + Cl -----> HCl (acid)
A decomposition reaction is usually defined as a type of chemical reaction in which a single and complex substance is disintegrated into two or more simple substances. For example, the same above reaction can be disintegrated into-
HCl (acid) ------> H + Cl
what are newtons laws?
Explanation:
Newton's 1st law: An object in motion stays in motion, and an object at rest stays at rest, until acted upon by an unbalanced force.
Newton's 2nd law: Force equals mass times acceleration.
Newton's 3rd law: For every action, there is an opposite and equal reaction.
what is the fourth planet from the sun and how many planets are there
Answer:
The fourth planet from the sun is Mars. There are 8 planets in our solar system. Its a source of debate of whether or not Pluto is a planet so there is 8 planets and not 9.
Explanation:
The fourth planet from the Sun is Mars.
Mars, commonly known as the "Red Planet," is known for its distinct reddish appearance, which is due to iron oxide, or rust, in its soil. Mars is smaller than Earth and has a thin atmosphere, which means it has lower surface pressure and cooler temperatures. Despite being colder and drier than Earth, Mars has some similarities with our planet, such as the presence of volcanoes.
In addition to its fascinating geological features, Mars has two small moons named Phobos and Deimos. It is also the only planet that has shown evidence of having water in the form of ice, particularly at its polar ice caps and possibly below its surface.
The___is the time it takes for a wave to complete one cycle.
Answer:
Period
Explanation:
we know that
The period of a wave is the time required for one complete cycle of the wave to pass by a point.
Period is the time which is taken by a wave to complete one complete cycle.
Explanation:
The period can also be referred as the time period or the wave period. The period is relevant to the concept of wave and its propagation, which leads to the measurement of its travel, leading to establish the relation between the period and the frequency.
The S. I. unit for the period is seconds. The period is in inverse relationship of proportionality with the frequency, which is the number of cycles completed in a second.
Which best describes what is required for any sound wave to travel?
empty space
O any medium
solid
liquid
Plllzzzhelp
Answer:
Any medium solid, liquid or gas is required for sound waves to travel.
Explanation:
A sound wave requires a medium to travel. Sound waves are mechanical waves that is why these waves require a medium to travel. Sound waves can travel through solids, liquids, and gases.
In solids, the particles of the medium are closely packed together as compared to liquids and gases. In liquids, particles are less tightly packed and almost negligible in gases.
Therefore sound waves produce vibration in the dense or solid medium. Denser the medium faster the sound waves travel. However sound waves can not travel through empty space.
Answer:
the answer is B just took the test!!
Explanation:
When a high-mass main sequence star runs out of both hydrogen and helium in its core, the core begins to fuse
.
When nuclear fusion ends in a high-mass star, the heavy elements formed in the star’s core are released through a
.
Answer:
Supernova
Explanation:
Stars have fixed lifespan. They are born and eventually die when they run out of fuel. An average mass star like sun ends of as white dwarf whereas a high mass star ends up as either neutron star or a blackhole. A high mass star when runs out of fuel first expands to become a supergiant red star and then blows of most of its mass on going supernova. The remnant core is either a neutron star or a blackhole.During supernova, all the heavy elements formed in fusion process is released.
When a high-mass star depletes its hydrogen and helium, it begins carbon fusion, creating heavier elements. After fusion ends, the star releases these elements via a supernova.
Explanation:When a high-mass main sequence star exhausts both its hydrogen and helium fuel, it starts a process known as carbon fusion. During this process, heavier elements like carbon, neon, oxygen, silicon, sulfur, and iron are formed. The elements formed depend on the mass and temperature of the star.
Eventually, when nuclear fusion ends in the star, the heavy elements that have been formed in the star's core are expelled through a catastrophic event known as a supernova. A supernova is a stellar explosion that briefly outshines an entire galaxy, releasing as much energy as the Sun is expected to emit over its whole life.
Learn more about Star Fusion and Supernova here:https://brainly.com/question/32874342
#SPJ6
Most of the eastern United States is a _____ biome
Answer:
Most of the eastern United States is a TROPICAL RAINFOREST bione
What is the focal length of a lens
Answer:
The focal length of a lens is refers to the distance from the center of the lens to the principal foci.
Which of the following reactions is a synthesis reaction?
N2 + 3H2 → 2NH3
MgI2 + Br2 → MgBr2 + I2
KClO3 → KCl + O2
HCl + NaOH → NaCl + H2O
Answer:
the answer is A) N2 + 3H2 → 2NH3
Explanation:
multiple reactants combine to form one product
option b is a single replacement
option c is a decomposition
options c is a double replacement
so the answer has to be A out of elimination anyway
Answer:The answer is B
Explanation:
What is "Decrease in velocity" please help i need this!! offering 60 points!!!
Answer:
Explanation:
If you go from 60 km/hr or 60 mph and apply your brakes so that you go down to 20 mph or 20 km/hr that is a decrease in velocity. It means you have to slow down because your are in a school zone or a neighborhood zone.
Deceleration can be defined this way.
d = (vf - vi) / t
where vi is bigger than your final velocity. In this case you are slowing down.
A force of 8,480 N is applied to a chart to accelerate it at a rate of 26.5 m/s2. What is the mass of the cart?
For this case we have that by definition, Newton's Second Law states that:
[tex]F = m * a[/tex]
Where:
F: It's the strength
m: It's the mass
a: It's the acceleration
According to the data we have to:
[tex]F = 8,480N\\a = 26.5 \frac {m} {s ^ 2}[/tex]
If we clear the mass of the formula we have:
[tex]m = \frac {F} {a}\\m = \frac {8,480} {26.5} = 320kg[/tex]
Answer:
The mass of the chart is 320kg
5/6 - 1/3 sorry for add part i was meant to do minus but tell me what it is?
Answer:
[tex]\frac{1}{2}[/tex]
Explanation:
[tex]\frac{5}{6} -\frac{1}{3} = \frac{15}{18} -\frac{6}{18}=\frac{9}{18} =\frac{1}{2}[/tex]
Answer:
1/2
Explanation:
we will take the LCM of denominators with is LCM (6,3)=6.
Now we shall make denominators equal no both sides. Since 5/6 already has 6 as denominator we shall multiply 2 with 3 to make denominators equal in 1/3 and so we also multiply 1 with 2. we get
1/3 × 1/2= 1/6 ×2/1=2/6
now 5/6-2/6=3/6=1/2