Answer:
Brute Force attack.
Explanation:
A network is a platform where end user devices like computers are connected to communicate and share resources. There are public networks and private networks.
A public network has its end devices and servers configured with a public IP address, which is routable on the internet, while private networks uses private IP addresses which can be used on the internet.
Private networks can be made accessable to public users by configuring an authentication and authorization policy, which could be one or a multi factor authentication. These requires a password and other factors to access the services of a private network.
An attacker can easily access a one factor or a password accessible user account, if the password is weak by using the process called a brute Force attack.
The brute Force attack exploits the vulnerability of weak passwords by entering possible valid combination from a defined set of possibilities.
____ convert a program design developed by a systems analyst or software developer using one of many computer languages.
Answer:
"Programmer " is the correct answer for the following question.
Explanation:
A programmer is a person who created the software They are basically a coder who develop a code for the program or the software. They are specialists in some in the programming code area. The programmer are writing the program for a different kind of software.
The main objective programmer they convert the program design which is developed by a systems analyst or system designer using a different kind of computer language
You are a network technician for a small corporate network. Today you moved an unused workstation to the IT Administration office, and now you need to connect the computer to the Ethernet local area network and the internet. In this lab, your task is to connect the workstation to the wired network as follows:_______
In the Networking Closet, use the appropriate twisted pair cable to make a connection between the patch panel and switch.
Use port IT Adm on the patch panel.
Use port 5 on the switch.
In the IT Administration office:_____
Connect the ITAdmin workstation to the local area network using the appropriate twisted pair cable.
Configure ITAdmin to obtain IP and DNS addresses automatically from the server on the local network.
Use the Network and Sharing Center to confirm that the workstation is properly connected to the local area network and the internet.
In the Networking Closet, use the appropriate twisted pair cable to make a connection between the patch panel and switch. Connect the cable to port IT Adm on the patch panel and port 5 on the switch. This will establish a physical connection between the network infrastructure and the switch port.
In the IT Administration office, connect the ITAdmin workstation to the local area network using the appropriate twisted pair cable. Plug one end of the cable into the network interface port of the workstation and the other end into an available network port in the office.
Configure the ITAdmin workstation to obtain IP and DNS addresses automatically from the server on the local network. This can be done by accessing the network settings of the workstation and selecting the option for automatic IP address and DNS configuration. This allows the workstation to receive the necessary network settings from the local network server.
Once the workstation is connected and the network settings are configured, use the Network and Sharing Center on the workstation to confirm that it is properly connected to the local area network and the internet. The Network and Sharing Center will display the network connection status, including the IP address, network type, and internet connectivity. It can also provide troubleshooting options if any issues are detected.
Therefore, by following these steps, you will successfully connect the ITAdmin workstation to the wired network, configure it to obtain network settings automatically, and confirm its connectivity to the local area network and the internet using the Network and Sharing Center.
For more details regarding Network and Sharing Center, visit:
https://brainly.com/question/32794361
#SPJ2
Final answer:
To connect a workstation to an Ethernet LAN and the internet in a corporate setting, use a twisted pair cable from the patch panel to the switch, and another from the workstation to the LAN. Configure the workstation to use DHCP for automatic IP and DNS configuration, and confirm the connection in the Network and Sharing Center.
Explanation:
To connect a workstation to the corporate Ethernet local area network (LAN) and the internet, begin in the networking closet. Use a twisted pair cable to connect port IT Adm on the patch panel to port 5 on the switch. This will enable network communication between the workstation and the broader network infrastructure.
In the IT Administration office, connect the ITAdmin workstation to the local area network using another twisted pair cable. To configure the workstation to obtain IP and DNS addresses automatically, navigate to the Network and Sharing Center and adjust the adapter settings to enable DHCP (Dynamic Host Configuration Protocol). This will allow the workstation to receive an IP address and DNS settings from a server on the network.
Finally, verify the connection by checking the status in the Network and Sharing Center. It should indicate that the workstation is connected to the network and has internet access. It's also important to ensure that the connection is secure, reliable and aligns with any organizational IT policies.
You work for a major news network in Europe. They have just released a new mobile app that allows users to post their photos of newsworthy events in real time. Your organization expects this app to grow very quickly, essentially doubling its user base each month. The app uses S3 to store the images, and you are expecting sudden and sizable increases in traffic to S3 when a major news event takes place (as users will be uploading large amounts of content.) You need to keep your storage costs to a minimum, and it does not matter if some objects are lost. With these factors in mind, which storage media should you use to keep costs as low as possible?
Answer:
S3 One Zone-Infrequent Access
Explanation:
S3 One Zone-Infrequent Access, is the best storage to use and it comes with lower cost option for infrequently accessed data that is recreatable. It also implies, data is stored in a single Availability Zone, which means there is no cross-AZ data replication in the event of failure. If the AZ is destroyed, so is your data.
The S3 - Reduced Redundancy Storage (RRS) is the best storage media to be used to keep costs as low as possible.
What is the Reduced Redundancy Storage?This storage media refers to an Amazon storage option that enables customers to store noncritical and reproducible data at lower levels of redundancy.
In conclusion, the S3 - Reduced Redundancy Storage (RRS) is the best storage media to be used to keep costs as low as possible.
Read more about Reduced Redundancy Storage
brainly.com/question/14466798
Readers who can easily locate and understand important information in a document will be more likely to agree with its arguments. True False
Answer and Explanation:
It is right readers can easily understand the situation and information that has given in any document. As the reader has many qualities such as
Good readers summarize what they read.
Readers make a prediction and visualize what they read
Readers revise and make inferences
Readers ask questions
Readers make connection
It is quite natural for a reader to understand the document with arguments.
A small company has developed a specialized software product that it configures specially for each customer. New customers usually have specific requirements to be incorporated into their system, and they pay for these to be developed and integrated with the product. The software company has an opportunity to bid for a new contract, which would more than double its customer base. The new customer wishes to have some involvement in the configuration of the system. Explain why, in these circumstances, it might be a good idea for the company owning the software to make it open source.
Answer:
It would be good for the company to make the item open source since it lessens the progression costs and attempts.
If turned into open source then the code would be available to the customers and are they could to take off upgrades and modify it to their own specific needs. It reduces the company's efforts, satisfies the customers whilts including them.
Open sourcing the software could facilitate better customization for new customers, distribute development efforts, foster innovation, build a supportive community, enhance trust, expand the market, and create strategic partnerships. These advantages could help the company successfully manage the increased customer base and meet the specific needs of the new contract.
In these circumstances, making the software open source could be a beneficial strategy for several reasons:
Enhanced Customization and Flexibility:Allowing the new customer to have involvement in the configuration of the system could be more easily facilitated if the software is open source. The customer can directly access and modify the source code to tailor the software to their specific needs. This could lead to higher customer satisfaction as their unique requirements are met more efficiently.
Shared Development Efforts:By making the software open-source, the company can leverage the development resources and expertise of its new and existing customers. These customers can contribute improvements, new features, or bug fixes back to the software, enhancing its overall quality and functionality without the company bearing the full development cost.
Faster Innovation:Open-source projects benefit from the collective innovation of a larger community. With more users and developers involved, new ideas and improvements can be implemented faster, keeping the software competitive and up-to-date.
Building a Community:Open-source software can help create a community of users and developers who are invested in the success of the software. This community can provide support, share best practices, and contribute to the software's growth, which can be particularly valuable for a small company looking to expand its customer base.
Increased Trust and Transparency:Potential customers may be more inclined to choose an open-source solution because of its transparency. They can review the code to ensure it meets their security and quality standards. This can be especially important for new customers who wish to be involved in the configuration process.
Market Expansion:Making the software open-source can attract more users and potential customers who prefer open-source solutions. This could lead to additional revenue streams, such as offering paid support, custom development services, or premium features on top of the open-source base.
Strategic Partnerships:Open-sourcing the software can open doors to partnerships with other companies, developers, and organizations that might be interested in contributing to or using the software. These partnerships can provide additional resources and opportunities for growth.
___ is the amount of data that a storage device can move from the storage medium to the computer per second.
Answer:
The answer is "data transfer rate".
Explanation:
The rate of information transfer is the sum of digital information, that travels from one destination to another at a particular time. This can also be viewed as transportation frequency from one place to another one of a given quantity of information. It is the processing power of the larger and specified map, which significantly lowers the data transfer rate.
Roger wants to give semantic meaning to the contact information, which is at the bottom of the web page. To do this
he will use a footer element as a ______ of the contact information.
a. child
b. parent
c. sibling
d. direct child
Answer:
The answer is "Option b"
Explanation:
In the footer element, the roger uses parent element as the contact information because defined in critical analysis, in which critical thought is knowledge, in which it is widely applicable to life. It just implies that, logically and rationally, you evaluate details, its weaknesses, and strengths, and other options were wrong that can be described as follows:
Option a and Option d is not correct because that doesn't use this information section. In option c, It is also not correct because it is related to the child.The video on your laptop needs to be updated. You have researched online, and according to the manufacturer, you can install a new video card in your laptop. What is the most likely slot connection you will use to install a new video card in your laptop?
Answer:
Mini PCIe .
Explanation:
If the video on the user's laptop requires to be changed and he has been reading elsewhere and can install video card in his laptop as per the producer. Then, Mini PCIe is the slot interface he will probably use to install a video card in his laptop because it was actually develop to store graphics cards and other peripherals.
jcm 100A _____________ is an object that functions as a part of the set or as a tool used by the actors. A. two-shot B. flag C. prop D. dolly E. All of the options are correct.
Answer:
The answer is "Option C"
Explanation:
The property master is a genius proprietor, it will be directly to blame for the purchase, acquisition, development, correct setting and/or supervision of every support necessary to processing in a film, tv, and movies production, and certain option were wrong, which can be described follows:
In option A, It is wrong, because it is a continuous short, that is taken in the same sets, In option B, It is a device, which is used in the motion picture. In option D, It is a wheel cart camera, that is used in the shooting, that's why it is wrong.Write pseudocode instructions to carry out each of the following computational operations:1. Determine the area of a triangle given values for the base b and the height h.2. Compute the interest earned in 1 year given the starting account balance B and the annual interest rate I and assuming simple interest, that is, no compounding. Also determine the final balance at the end of the year.3. Determine the flying time between two cities given the mileage M between them and the average speed of the airplane.
Answer:
Hi there! The question is checking your knowledge on Pseudocode. Pseudocode is a high level solution written in plain English to outline the steps needed for the program to work correctly. An implementation for the different parts of the question is written below.
Explanation:
1. Determine the area of a triangle
declare formula for area calculation of triangle as ½ * (base * height)
validate input parameters “base” and “height”
apply formula and return result
2. Compute the interest earned Prompt user for input 2
declare formula for interest calculation as annual interest rate * term * starting account balance
validate input parameters “interest_rate” and “starting_account_balance ”
apply formula and return result as final balance at the end of the year as the interest earned + starting balance.
3. Determine the flying time between two cities given the mileage M between them and the average speed of the airplane.
declare formula for time calculation of triangle as time = distance / speed
validate input parameters for mileage “M” and speed “S”
apply formula and return result
After a security incident is verified in a SOC, an incident responder reviews the incident but cannot identify the source of the incident and form an effective mitigation procedure. To whom should the incident ticket be escalated?
a SME for further investigation
a cyberoperations analyst for help
an alert analyst for further analysis
the SOC manager to ask for other personnel to be assigned
Answer:
Option A i.e., SME for further investigation.
Explanation:
Following the reports of such a security incident into an SOC, an incident respondent examines the incident but could not determine the cause of that same incident as well as establish an appropriate response protocol. The ticket for an incident must be applied to SME for even more inquiry. So, the following answer is correct.
You have just upgraded your case fan. When installing it you notice that the old fan used 3 pins and that your new one has four pins. This isn't a problem because the intended fan header has four pins. What is the extra pin for?
Answer:
Fan Control
Explanation:
This is used to manage the rotating speed of the fan. The main use of the fan control is to help reduce the heat that is being generated by a fan.
The common cooling fans used in computers use standardised connectors with two to four pins. The first two pins are always used to deliver power to the fan motor, while the function of the fan depend on fan design and type.
The colour of the wires connected to these pins varies depending on the number of connectors, but the role of each pin is standardized and guaranteed to be the same on any system. Cooling fans equipped with either two- or three-pin connectors are usually designed to accept a wide range of input voltages, which directly affects the rotation speed of the blades.
The fourth pin on a computer fan is for Pulse Width Modulation (PWM) control, allowing for precise fan speed adjustment.
Explanation:The extra pin on a four-pin computer fan compared to a three-pin fan is for Pulse Width Modulation (PWM) control. This fourth pin allows for more precise control over the fan's speed. In contrast to the three-pin fans which only allow for control of the fan's speed by varying the voltage supplied to it, the four-pin setup with PWM gives the motherboard or fan controller the ability to send speed control signals to the fan. This results in better cooling efficiency and quieter operation because the fan can run at exactly the speed needed for the current temperature, rather than fluctuating or running at full speed continuously.
What is occurring when an attacker manipulates commonplace actions that are routinely performed in a business?
Answer:
Vulnerable business processes, also called business process compromise (BPC), occurs when an attacker manipulates commonplace actions that are routinely performed.
Plan and projection adjustments may be made promptly, budget and closure cycles can be accelerated, and standards for financial reporting compliance can be ensured.
What attacker manipulates commonplace actions?Business process compromise (BPC), often known as vulnerable business processes, is when an attacker manipulates actions that are frequently taken.
Using the SAP Business Planning and Consolidation (SAP BPC) application's planning, budgeting, forecasting, and financial consolidation features.
An assailant in India, for instance, would ask New York to send money to Taiwan late on a Friday afternoon.
Therefore, Vulnerable business processes, also called business process compromise (BPC), occurs when an attacker manipulates commonplace actions that are routinely performed.
Learn more about attacker here:
https://brainly.com/question/24300486
#SPJ5
A method or system of government for information management or control; an example is the Information Technology Infrastructure Library (ITIL) that we are using as a way to organize our course.
a) true
b) false
Answer:
The answer is A. True
Explanation:
Information governance is a framework or methodology of the government for information control and management.
ITIL (Information Technology Infrastructure Library) is an example of information governance, it was developed by the Central Computer and Telecommunications Agency (CCTA) of the British government. It has gone through various revisions and currently possesses five books, at first it contained more than 30 books.
____ twisted pair is the least quality twisted pair wire that should be used in a data/voice application.
Answer:
Category 5 (Cat 5) twisted pair is the least quality twisted pair wire that should be used.
Explanation:
The reason is as follows:
Category 1 twisted pair is not suitable for transmitting data but comes in handy for telephone communications. Hence, it should not be used in a data/voice application.Category 2 twisted pair is suitable for data transmission, however, it can only transmit at 4Mbps which is very slow. Hence, it should not be used in a data/voice application.Category 3 twisted pair can transmit data with speed reaching 10Mbps which is slow for voice/data communication.Category 4 twisted pair can transmit data with speed reaching 16Mbps and is used in token ring networks. It is slow for communicating in a voice/data application.Category 5 twisted pair is the least qualified to be used in a voice/data application because it can transmit data at speeds that reach 100Mbps.Hence, Cat 5 or Category 5 twisted pair is the least quality twisted pair that should be used in a data/voice application.
Final answer:
The correct answer is "Category 5 (Cat5)" The minimum quality twisted pair wire that should be used in data/voice applications is Category 5 (Cat5), though Cat5e and higher are preferred due to better performance.
Explanation:
The Category 5 (Cat5) twisted pair is the least quality twisted pair wire that should be used in a data/voice application. This standard is considered the minimum for supporting speeds up to 100 Mbps. Although it is an older category and has been superseded by Cat5e, Cat6, and higher categories that provide faster speeds and better crosstalk protection, Cat5 is still used in some installations where higher specifications are not necessary or cost is a limiting factor.
For most modern applications, however, Cat5e is the preferred minimum as it supports speeds up to 1 Gbps which is more suitable for current demands in network environments. Cat6 and above offer even better performance, supporting higher speeds and frequency ranges, which are important as demand for bandwidth continues to grow with the proliferation of connected devices and data-intensive applications.
"Which of the following is not an example of a project? Select one: a. Creating a website for a company b. Raising money for a disaster relief trip c. Starting-up a restaurant d. Emptying the recycling everyday"
Answer:
d. Emptying the recycling every day"
Explanation:
Stages of a project:
Definition, Initiation (Identify key Stakeholders, Formally authorize Project, Kick-off Project)Planning (Plan Project Leadership, Assemble Project team, Cost).Execution - Monitoring & Control (Direct and Manage Project work, monitor progress, lead project).Closure (Deliver the Scope, Document Lessons Learned, Release Project Team and Close Project).The option that is not an example of a project is Emptying the recycling every day"
What is a project?A project can be regarded as an undertaking that is been carried out collaboratively or by someone to achieve a purpose.
This could be possibly involving research or design, and other process.
Learn more about project at;
https://brainly.com/question/16934135
Declare a char array named line of size 50, and write a statement that reads in the next line of console input into this array. (Assume the line may contain whitespace characters and the total number of the characters in the line is less than 50)
Answer:
Following are the statement in the C++ Programming Language.
//set character data type variable
char line[50];
//get character input from the user
cin.get(line, 50);
Explanation:
Following are the description of the statement.
In the above statement, we set character data type array variable that is 'line' and its index value is '50' that means the following variable not contain more than 50 character elements. In the other line, we get character type input in the following variable 'line' from the user through the get() method.Final answer:
To read a line of console input into a char array named line of size 50 in C++, use 'char line[50];' to declare the array and 'std::cin.getline(line, 50);' to read the input, including whitespaces.
Explanation:
To declare a char array named line of size 50 in C++ and read a line of console input that may contain whitespace characters into this array, you can use the following code snippet:
char line[50];
std::cin.getline(line, 50);
Here, cin.getline is a function that reads characters from the standard input stream (cin) into the line array until a newline character is encountered or the maximum length of the array is reached, which is specified as 50 characters in this case. Notice that this reads the entire line, including any whitespace, such as spaces or tabs, and stops reading once it hits the limit or encounters a newline character, which is the end-of-line indicator.
As you are talking to your colleague over the phone, the sound of an airplane flying low drowns out part of your conversation. Immediately after, your cell phone rings, again disturbing the flow of conversation. Both of these are instances of:
Answer:
Interference.
Explanation:
As the user is communicating with their friend through the mobile, most of their interaction is interrupted by the noise of an airplane flying at low hight. Instantly afterward, the user's mobile phone rang, disrupting the communication once more.
So, according to the following scenario both of those are examples of interference.
Final answer:
The disruption of the conversation by an airplane and a cell phone ring are examples of physical noise, which includes environmental sounds that interfere with the ability to hear.
Explanation:
The scenario described, where the sound of an airplane flying low and the ringing of a cell phone disrupt a conversation, are instances of physical noise. Physical noise includes various environmental sounds that interfere with hearing.
Examples like construction noise, planes, or loud music nearby can make it difficult to catch what the speaker is saying. In crowded places, where the frequency content of sounds overlaps, masking can also occur, making it hard to hear less intense sounds.
Additionally, unexpected loud noises like a cell phone ringing can capture attention, often referred to as bottom-up attentional capture due to their environmental origin.
Data represent real-world things including raw facts such as audio and video data. Group of answer choices True False
Answer:
The answer is "False".
Explanation:
Digital information is the abstract, deterministic expression of information or functions, in information theory and systems engineering. This refers to data being collected, which is processed and transmitted.
It is most frequently used in computer science and electronics, especially in which real-world data is transformed into binary numbered form as in photography and audio, that's why the given statement is false.
According to the video, which of the following is communication between two individuals? Intrapersonal Communication Public Speaking Dyadic Communication Group Communication Interpersonal Communication Dyadic Communication AND Interpersonal Communication
Answer:
The Last option: Dyadic Communication AND Interpersonal Communication
is the correct one.
Explanation:
Communication can be defined as the process in which one may convey his thoughts or inquires about things.
There are many types of communications as listed above.
Intrapersonal CommunicationInterpersonal CommunicationDyadic CommunicationSmall Group CommunicationPublic CommunicationMass CommunicationOrganizational Communication Intercultural Communication.Under all these, Interpersonal communication and Dyadic communication are the ones that are between two people.
Dyadic communication is the one in which two people relate to exchange thoughts and ideas face-to-face. It is sometimes referred as dialogic relation.
Interpersonal relation can be between two or more than two persons that may know each other. It is clearly specified in this communication that who listener and speaker are.
I hope it will help you!Answer:
Dyadic communication is the one in which two people relate to exchange thoughts and ideas face-to-face. It is sometimes referred as dialogic relation.
Interpersonal relation can be between two or more than two persons that may know each other. It is clearly specified in this communication that who listener and speaker are.
Several company users are frequently forgetting passwords for their mobile devices and applications. Which of the following should the systems administrator do to reduce the number of help desk tickets submitted?A. Implement single sign-on.B. Enable multifactor authentication.C. Configure biometric authentication.D. Remove complex password requirements.
Answer:
Option A i.e., Implement single sign-on.
Explanation:
Many corporate users often forget credentials for various mobile phones and apps. Then, Implementing single sign-on is the sys admin which reduces the amount of ticket requested to that of the helpdesk.
SSO is perhaps a method of authorization which enables the user to control various software using single collection of login information. This is a simple procedure in companies, in which a company locates different resources for connected to a network of local region.
What feature in Excel automatically displays a list of field headings when you begin to create a structured reference?
Answer:
Formula Auto-Complete
Explanation:
To minimize typing and syntax errors, you can create and edit formulas with Formula Auto-Complete.
After you type an = (equal sign) and begin typing to start a formula, Excel displays a dynamic drop-down list of valid functions, arguments, defined names, table names, special item specifiers—including [ (open bracket),, (comma), : (colon)—and text string that match the letters you type. An argument is the cell references or values in a formula that contribute to the result. Each function uses function-specific arguments, which may include numeric values, text values, cell references, ranges of cells, and so on
When the store-and-forward method of switching is in use, what part of the Ethernet frame is used to perform an error check?
Answer:
Source MAC address in the header
Explanation:
Store-and-Forward Switching is a Layer 2 switching method and it means that the LAN switch copies each complete frame into the switch memory buffers and computes a cyclic redundancy check (CRC) for errors. CRC is an error-checking method that uses a mathematical formula, based on the number of bits (1s) in the frame, to determine whether the received frame is errored. If a CRC error is found, the frame is discarded. If the frame is error free, the switch forwards the frame out the appropriate interface port
The Ethernet frame uses the FCS (Frame Check Sequence) for error checking when the store-and-forward switching method is in use.
When the store-and-forward method of switching is in use, the part of the Ethernet frame used to perform an error check is the FCS (Frame Check Sequence).This FCS, a field within the Ethernet frame, contains error-checking information that allows the receiving device to detect any transmission errors.By comparing this FCS value with the received data, the device can determine if the information in the frame is accurate or if errors have occurred.An enterprise DBMS is automatically capable of serving as a mobile DBMS. There are no special issues raised by mobility. True False
Answer:
The answer is True.
Explanation:
The enterprise DBMS can also be used with mobile DBMS.
Enterprise DMBS is the latest version of DBMS which is used in organizations and enterprises to handle a huge amount of Data.
Enterprise Database Management System is mainly designed to do large work simultaneously. It can handle multiple queries simultaneously.
Multiple users (about 100-10,000 users) can access data at the same time and even they can manipulate simultaneously.
The features of Enterprise DBMS is to work efficiently, multi processing, fast, accurately, and handling huge burden of data.
What occurs when a company knows enough about a customer's likes and dislikes that it can fashion offers more likely to appeal to that person, for instance, by tailoring its website to individuals or groups based on profile information?
Answer:
Personalization
Explanation:
Recommendation systems are becoming a powerful tool in our times today, from only shopping to healthcare provision. One major aspect of Recommender systems is Personalization.
Personalization is a concept of adjusting a service or product to greatly suit the customer. Personalization can be drawn by the information provided by the individual such as location, gender, marital status, etc. or drawn from other inferences retrieved from the customer, such as:
the most clicked service category of a customer, customer browsing patterns or services or products previously obtained by a customer.These inferences retrieved from customers can greatly improve customer satisfaction and get them drawn to the system.
You have encountered a technology that is effective in blocking computer-generated attempts to access a website because it is generally easy for humans to recognize distorted characters. What is this technology?
Answer:
The correct answer to the following question will be "CAPTCHA".
Explanation:
This CAPTCHA technology, an abbreviation for the Completely Automated Public Thought experiment to tell Humans and Computers system Apart.A CAPTCHA is typically a blurred image on a similarly warped or multi-colored backdrop, with a sequence of distorted characters.Therefore, CAPTCHA is the right answer.
Given a variable temps that refers to a list, all of whose elements refer to values of type float , representing temperature data, compute the average temperature and assign it to a variable named avg_temp . Besides temps and avg_temp , you may use two othervariables -- k and total .
My solution below didn't work. I wonder how to go about this problem.
temps = []
avg_temp = 0.0
total = 0.0
for k in range(temps):
total += k
avg_temp = total/len(temps)
Answer:
The problem of the question code is as follows:
Explanation:
There must be the items in the list: The above question code is in python language. The temps are a list type variable that is used to hold the collection of items or value. But in the above code, there is no item in the K list. So first remove this problem with the help of add the value on the list. There are two ways to add value to the list:- 1. Define the static list element by writing like "temps=[1.2,2.4,4.5]". and 2. Take input from the user and then add by "temps.append(item)".The syntax of the for loop: The syntax of the for loop is not right because it holds the "range" keyword which is written when we give the numeric value like, "for x in range(2)" or "for x in range(1,2)". So to correct for syntax the user needs to write "for k in temps:".If the user removes the above-defined error from the code then the above code will run correctly
The code segment you've provided contains a small mistake in the loop that iterates through the list temps. Instead of using range(temps), you should iterate directly over the elements in temps using for k in temps:
temps – a list with temperature data as floating-point numbers
total – to hold the sum of all temperatures
k – to refer to each temperature in the list during iteration
avg_temp – to store the computed average temperature
The correct code should look like this:
temps = [/* list of float values */]
avg_temp = 0.0
total = 0.0
for k in temps:
total += k
avg_temp = total / len(temps)
Here, the variable k will take on the value of each element in temps as we iterate through the list, adding each temperature to total. After the loop, we divide total by the number of elements in temps to get the average temperature. This will correctly compute avg_temp as long as temps is not empty.
The terms "data", "information", and "knowledge" have specific meanings. With regard to a customer satisfaction application used in the automobile industry, which of the following is an example of data?
a. the ability to create a program that provides rewards for dealerships with high levels of customer satisfaction and corrective action plans for dealerships that have low levels of satisfaction.
b. the web-based application that collects and stores records of customer satisfaction surveys and allows dealerships to view their data.
c. reports that summarize ratings for a specific dealership including a calculation of the average rating across all survey questions and a calculation of summary statistics for groups of questions that correspond to important dimensions such as dealership staff, satisfaction with product, quality of service and so on.
d. records containing numerical ratings from customer surveys completed online after each visit to a dealership.
Answer:
An example of data that matches the terms "data", "information", and "knowledge" have specific meanings. With regard to a customer satisfaction application used in the automobile industry Is:
c. reports that summarize ratings for a specific dealership including a calculation of the average rating across all survey questions and a calculation of summary statistics for groups of questions that correspond to important dimensions such as dealership staff, satisfaction with product, quality of service and so on.
Explanation:
a. is incorrect because we are talking about the intrinsic or abstract concept of data or information instead of the competence to apply all of this knowledge to perform a task. So it is incorrect.
b. It is incorrect because like in the case before we are talking about the intrinsic meaning of data not about the process to gather it.
d. this could have been right, however, it is incorrect because data or information has many ways to be obtained not just one.
Therefore, c is the correct answer because it describes the intrinsic concept of data and how it is identified in the context.
WHAT ARE THEY USED FOR Developing tank 2. Contact print 3xer 4. Developer 5. Darkrooms 6. Acid stop bath 7. Enlarger 8. Johann Heinrich Schulze
1. Developing tank is a developing tank is a light-tight container used for developing film. A developing tank allows photographic film to be developed in a daylight environment
2. Contact print is a photographic image produced from film; sometimes from a film negative, and sometimes from a film positive or paper negative.
3. Developer is one or more chemicals that convert the latent image to a visible image
4. A darkroom is used to process photographic film, to make prints and to carry out other associated tasks. It is a room that can be made completely dark to allow the processing of the light-sensitive photographic materials, including film and photographic paper.
5. Stop bath is a chemical bath usually used in processing traditional black-and-white photographic films, plates, and paper used after the material has finished developing.
6. Enlarger is a specialized transparency projector used to produce photographic prints from film or glass negatives, or from transparencies.
7. Johann Heinrich Schulze proved that the darkening of silver salts, a phenomenon known since the 16th century and possibly earlier, was caused by light and not heat
A junior security analyst is working on a new ticketing system called ITCustomers. Now and is working in a new field within the tickets dealing with human mistakes as security incidents. A business executive, while traveling, was surfing a gambling site on his laptop at the airport and downloaded a virus that infected the company’s e-mail system. In filling out the ticket, the junior analyst selected "carelessness with laptops" as the human error. Was the junior analyst’s description of the human mistake on the ticket accurate? Why or why not?
Answer:
Junior analyst's description isn't right.
Explanation:
"carelessness with laptops" isn't the correct description for the mistake or error, and looks like some physical event occurred like laptop computer getting damaged, because of the error, rather than software virus infection.
A more accurate description would be "not being careful enough while surfing the internet and visiting websites".