Answer:
5 moles of carbonic acid will be produced.
Explanation:
[tex]NaHCO_3+HCl\rightarrow H_2CO_3 + NaCl[/tex]
Moles of sodium bicarbonate = 5 moles
According to reaction , 1 mole of sodium bicarbonate reacts with 1 mole of HCl.
Then 5 moles of sodium bicarbonate will react with:
[tex]\frac{1}{1}\times 5 mol= 5 mol[/tex] of HCl
Since, we have 8 moles of HCl. this means that sodium bicarbonate is in limiting amount. Hence, amount of carbonic acid formed will depend upon moles of sodium bicarbonate.
According to reaction , 1 mole of sodium bicarbonate gives with 1 mole of carbonic acid .
Then 5 moles of sodium bicarbonate will give :
[tex]\frac{1}{1}\times 5 mol= 5 mol[/tex] of carbonic acid.
5 moles of carbonic acid will be produced.
List the types of intermolecular forces that exist between molecules (or basic units) in each of the following species: (a) benzene (C6H6), (b) CH3Cl,
(c) PF3, (d) NaCl, (e) CS2.
Answer:
Answer has been given below
Explanation:
Every molecules contain electrons. So, London dispersion force exists in all molecules.For polar aprotic molecules, additional dipole-dipole force exists between molecules.For ionic compounds, additional ionic interaction force exist between ions.For non polar molecules, only London dispersion force exists between molecules.Benzene is a non-polar molecule. So London dispersion force exists between benzene molecules.[tex]CH_{3}Cl[/tex] is a polar molecule. So, dipole-dipole force and London dispersion force exists between [tex]CH_{3}Cl[/tex] molecules.[tex]PF_{3}[/tex] is a polar molecule. So, dipole-dipole force and London dispersion force exists between [tex]PF_{3}[/tex] molecules.NaCl is an ionic compound. So London dispersion force and ionic interaction force exists between NaCl molecules.[tex]CS_{2}[/tex] is a nonpolar molecule. So, London dispersion force exists between [tex]CS_{2}[/tex] molecules.• What would you predict if you used a starch solution instead of the protein?
Using a starch solution instead of a protein in an experiment would yield different results because proteins and starch have different biochemical properties.
Explanation:If you used a starch solution instead of a protein, different biochemical reactions would occur, as they differ fundamentally in their nature. Proteins are made up of amino acids, while starch is a polysaccharide composed of glucose units. As such, they interact differently with various substances. For instance, if you perform a Iodine test, the results would vary: iodine reacts with starch to give a blue-black colour, but it shows no color change with proteins. Likewise with the Biuret's test, you would obtain a negative result with starch but a positive (purple color) with proteins.
Learn more about starch solution here:https://brainly.com/question/30031313
How many carbon atoms would be in the compound named chlorobenzene
What is the molarity of a 5.00 x 10^2 ml solution containing 21.1 g of potassium bromide (KBr) if the molar mass of KBr is 119.0 g/mol?
The molarity of a 5.00 x 10² mL solution containing 21.1 g of potassium bromide (KBr) is 0.354 M, calculated by converting the mass of KBr to moles and then dividing by the volume of the solution in liters.
Explanation:To find the molarity of a 5.00 x 10² mL solution containing 21.1 g of potassium bromide (KBr), you will need to use the definition of molarity, which is moles of solute per liter of solution (mol/L). The molar mass of KBr is given as 119.0 g/mol. First, convert the mass of KBr to moles by dividing by the molar mass:
21.1 g ÷ 119.0 g/mol = 0.177 moles of KBr
Next, convert the volume of the solution from milliliters to liters:
5.00 x 10² mL = 0.500 L
Now, you can calculate the molarity by dividing the moles of KBr by the volume of the solution in liters:
0.177 moles ÷ 0.500 L = 0.354 M
The molarity of the potassium bromide solution is 0.354 M.
Learn more about Molarity Calculation here:https://brainly.com/question/15948514
#SPJ2
What pressure is exerted by 932.3 g of CH4 in a 0.560 L steel container at 136.2 K?
What gas is evolved when sulfuric acid is added to the reaction mixture?
Suppose you wanted to monitor a pH change between 5.3 and 6.3. Which indicator would be most appropriate?
Answer:
d) bromothymol blue
Explanation:
Hello,
For that pH change between 5.3 and 6.3, we need an indicator which changes the color within that rank, in such a way, among the given options, one recalls the bromothymol blue because it turns yellow below about a pH of 6 and starts getting green above 6, therefore, one states that it is the most appropriated indicator.
Best regards.
An ideal gas is contained in a cylinder with a volume of 5.0×102 mL at a temperature of 30. ºC and a pressure of 710. torr. The gas is then heated to a temperature of 820. ºC. What is the new pressure of the gas in atmospheres (atm)?
Final answer:
To find the new pressure of an ideal gas after heating, we use the combined gas law. The initial temperature and pressure are converted to Kelvins and atmospheres respectively, and then the formula is applied to give a new pressure of approximately 3.038 atm after heating the gas to 820.0 °C.
Explanation:
To determine the new pressure of an ideal gas after heating, we can use the combined gas law, which states that (P1 x V1) / T1 = (P2 x V2) / T2, where P is pressure, V is volume, and T is temperature in Kelvins. Given that volume remains constant (as the gas remains in the same cylinder) and considering the temperature change from 30.0 °C to 820.0 °C, we just need to convert these temperatures into Kelvins by adding 273.15 and calculate the new pressure.
Convert the initial temperature to Kelvins: T1 = 30.0 °C + 273.15 = 303.15 K
Convert the final temperature to Kelvins: T2 = 820.0 °C + 273.15 = 1093.15 K
Convert the initial pressure to atmospheres: P1 = 710 torr × (1 atm / 760 torr) ≈ 0.934 atm
Now apply the combined gas law: P2 = (P1 × T2) / T1
P2 = (0.934 atm × 1093.15 K) / 303.15 K ≈ 3.038 atm
Therefore, the new pressure of the gas after heating to 820.0 °C is approximately 3.038 atm.
Palmitic acid C16H32O2 is a dietary fat found in beef and butter. The caloric content of palmitic acid is typical of fats in general.
Part A
Write a balanced equation for the complete combustion of palmitic acid. Use \rm H_2O(l) in the balanced chemical equation because the metabolism of these compounds produces liquid water.
Express your answer as a chemical equation. Identify all of the phases in your answer.
Explanation:
Combustion is a type of chemical reaction in which substance burns under the presence of oxygen or in other words reaction of hydrocarbon with oxygen to produce water and carbondioxide.
Palmitic acid when undergoes combustion it gives carbondioxide and water.
The balanced chemical equation is given as:
[tex]C_{16}H_{32}O_2(s)+23O_2(g)\rightarrow 16CO_2(g)+16H_2O(l)[/tex]
According to stoichiometry, when 1 mol of palmitic acid reacts with 23 moles of oxygen to give 16 moles of carbondioxide and 12 moles of water.
What is the value of a in the following nuclear reaction? 238 92u→234 90th azx
In the nuclear reaction of Uranium-238 decaying into Thorium-234, an alpha particle (He) with a mass number of 4 and atomic number of 2 is emitted. Uranium-235 contains 92 protons and 143 neutrons.
Explanation:The nuclear reaction presented is 238 92U → 234 90Th + 4 2He. Here, we see Uranium-238 decaying into Thorium-234 and an alpha particle, which is identical to a helium nucleus with a mass number of 4 and an atomic number of 2. The original equation given in the question lacks the alpha particle (He), but by understanding the law of conservation of mass and charge, we can deduce the identity of the missing particle.
An isotope of uranium with an atomic number of 92 and a mass number of 235 will thus contain 92 protons, as the atomic number defines the number of protons in an atom's nucleus. To find the number of neutrons, we subtract the atomic number from the mass number: 235 - 92 = 143 neutrons.
How many unpaired electrons would you expect on aluminum in aluminum oxide.?
In aluminum (III) oxide [tex](\(Al_2O_3\))[/tex], aluminum has a +3 oxidation state, resulting in the loss of all its valence electrons. Hence, aluminum in [tex]\(Al_2O_3\)[/tex] has zero unpaired electrons, contributing to its diamagnetic properties.
In aluminum (III) oxide[tex](\(Al_2O_3\))[/tex], each aluminum atom has a +3 oxidation state. Aluminum's electron configuration [tex](\(1s^22s^22p^63s^23p^1\))[/tex] suggests one unpaired electron, but in the +3 oxidation state, it loses all three valence electrons. Thus, aluminum in [tex]\(Al_2O_3\)[/tex] has zero unpaired electrons because all its valence electrons are lost when it forms ions. Consequently, no unpaired electrons contribute to its magnetic properties, making it diamagnetic. Therefore, the number of unpaired electrons on aluminum in aluminum (III) oxide is 0.
Complete Question :
How many unpaired electrons would you expect on aluminum in aluminum (III) oxide. Enter an integer.
Calculate the equilibrium constant for each of the reactions at 25 ∘C. 2Fe3+(aq)+3Sn(s)→2Fe(s)+3Sn2+(aq)
Equilibrium constants are calculated using thermodynamic data such as standard free energy changes and standard cell potentials, which are then related to the equilibrium constant at a specific temperature using the formula ΔG° = -RTlnK.
Explanation:The calculation of equilibrium constants for chemical reactions requires the use of thermodynamic data, such as standard free energy changes (ΔG°) or standard cell potentials (E°cell). The relationship between the standard free energy change and the equilibrium constant (K) at a given temperature (T) is given by the equation ΔG° = -RTlnK, where R is the universal gas constant and T is the temperature in Kelvin.
For a reaction such as 2Fe3+(aq) + 3Sn(s) → 2Fe(s) + 3Sn2+(aq), the standard free energy change ΔG° can be calculated from the standard reduction potentials of the half-reactions involved. The equilibrium constant K is then calculated using the aforementioned relationship. If ΔG° is negative, the reaction is spontaneous, and at equilibrium, there will be a greater concentration of products than reactants. Conversely, if ΔG° is positive, the reaction is non-spontaneous, and reactants will predominate at equilibrium.
To determine the equilibrium constant for a solubility product (Ksp), like for FeF2 (s), the concentration of the ions at equilibrium is calculated, considering that the product of the ion concentrations raised to the power of their respective stoichiometric coefficients in the dissolution reaction equals the Ksp. This assessment is key for predicting whether a precipitate will form when solutions containing different ions are mixed.
Final answer:
The equilibrium constant for a chemical reaction can be calculated using standard free energy change and the relationship K = e^{-ΔG°/RT}, or by using standard cell potentials through the equation ΔG° = -nFE°.
Explanation:
The question asks to calculate the equilibrium constant for a chemical reaction at 25 °C. The equilibrium constant, denoted as K, is a dimensionless number that provides a measure of the extent to which a reaction will proceed at a given temperature. The calculation of K often involves using the standard free energy change (ΔG°) and the relationship given by the equation K = e^{-ΔG°/RT}, where R is the universal gas constant and T is the temperature in Kelvin. To determine ΔG° for a reaction, one may need to reference thermodynamic data for the formation of compounds and elements involved in that reaction.
Standard cell potentials can also be used to calculate the equilibrium constant as they are related to the free energy change through the equation ΔG° = -nFE°, where F is Faraday's constant, E° is the standard cell potential, and n is the number of moles of electrons transferred in the reaction.
3.15 g of an unknown gas at 35 °C and 1.10 atm is stored in a 1.85-L flask. What is the density of the gas? what is the molar mass of the gas?
Answer:
[tex]M=39.1g/mol[/tex]
[tex]\rho=1.70g/L[/tex]
Explanation:
Hello,
In this case, one uses the ideal gas equation:
[tex]PV=nRT[/tex]
By solving for moles in terms of mass and molar mass one obtains:
[tex]PV=\frac{m}{M}RT\\M=\frac{mRT}{PV} =\frac{3.15g*0.082 \frac{atm*L}{mol*K} *(35+273)K}{1.10atm*1.85L} \\M=39.1g/mol[/tex]
On the other hand, the density is easily computed as shown below:
[tex]\rho=\frac{m}{V}=\frac{3.15g}{1.85L}=1.70g/L[/tex]
Best regards.
A.)The equilibrium constant, Kp, for the following reaction is 0.110 at 298 K:
NH4HS(s) NH3(g) + H2S(g)
Calculate the equilibrium partial pressure of H2S when 0.371 moles of NH4HS(s) is introduced into a 1.00 L vessel at 298 K.
PH2S = ?? atm
B.) The equilibrium constant, Kp, for the following reaction is 0.497 at 500 K:
PCl5(g) PCl3(g) + Cl2(g)
Calculate the equilibrium partial pressures of all species when PCl5(g) is introduced into an evacuated flask at a pressure of 1.47 atm at 500 K .
PPCl5 = ?? atm
PPCl3 = ?? atm
PCl2 = ?? atm
Final answer:
To calculate the equilibrium partial pressure of H2S, use the equilibrium constant expression and rearrange to solve for PH2S.
Explanation:
To calculate the equilibrium partial pressure of H2S, we need to use the equilibrium constant, Kp. The equilibrium constant expression for the given reaction is:
Kp = [H2S] / [NH4HS]
Given that Kp = 0.110, we can establish the relationship:
Kp = (PH2S) / (PNH4HS)
Since the initial moles of NH4HS is 0.371 moles and the volume of the vessel is 1.00 L, we can calculate the initial partial pressure of NH4HS:
PNH4HS = (0.371 mol) / (1.00 L) = 0.371 atm
Now, we can rearrange the equilibrium constant expression and solve for PH2S:
PH2S = Kp * PNH4HS = (0.110)(0.371 atm) = 0.0408 atm
The equilibrium partial pressure of H₂S is 0.332 atm. The equilibrium partial pressures for PCl₅, PCl₃, and Cl₂ are 0.83 atm, 0.64 atm, and 0.64 atm, respectively.
A.) To determine the equilibrium partial pressure of H₂S for the reaction NH₄HS(s) ⇌ NH₃(g) + H₂S(g) with Kp = 0.110 at 298 K, follow these steps:
Recognize that solid NH₄HS does not affect the equilibrium expression since its activity is 1.Let the equilibrium partial pressures of NH₃ and H₂S be PNH₃ = PH₂S = P since they are produced in a 1:1 ratio.Use the equation for Kp: Kp = PNH₃ × PH₂S = P².Substitute the given Kp value: 0.110 = P².Solve for P: P = √0.110 = 0.332 atm.Therefore, the equilibrium partial pressure of H₂S is 0.332 atm.
B.) For the reaction PCl₅(g) ⇌ PCl₃(g) + Cl₂(g) with Kp = 0.497 at 500 K:
Set up an ICE table. Let the initial pressure of PCl₅ be 1.47 atm, and the changes in pressure be -x for PCl₅ and +x for both PCl₃ and Cl₂.At equilibrium: PCl₅ = 1.47 - x, PCl₃ = x, and Cl₂ = x.The equilibrium expression is: Kp = (PCl₃ × PCl₂) / PPCl₅.Substitute the values: 0.497 = (x × x) / (1.47 - x).Solve the quadratic equation: 0.497 = x² / (1.47 - x).Rearrange to get 0.497(1.47 - x) = x² which gives 0.73 - 0.497x = x².Rearrange into standard quadratic form: x² + 0.497x - 0.73 = 0.Use the quadratic formula x = [-b ± √(b² - 4ac)] / 2a where a = 1, b = 0.497, and c = -0.73.Solve for x to get two possible solutions, but only the positive value is physically meaningful: x ≈ 0.64 atm.Calculate the equilibrium pressures: PPCl₃ = 0.64 atm, PCl₂ = 0.64 atm, and PPCl₅ = 1.47 - 0.64 = 0.83 atm.Therefore, the equilibrium partial pressures are PPCl₅ = 0.83 atm, PPCl₃ = 0.64 atm, and PCl₂ = 0.64 atm.
If 6.89 g of CuNO3 is dissolved in water to make a 0.460 M solution, what is the volume of the solution?
To find the volume of a 0.460 M solution of CuNO₃ made from 6.89 g of CuNO₃, you calculate the number of moles and use the molarity formula, resulting in approximately 119 mL of solution.
To solve this problem, follow these steps:
Determine the molar mass of CuNO₃:
Cu: 63.55 g/mol
N: 14.01 g/mol
O: 16.00 g/mol (3 atoms, so 16.00 g/mol × 3 = 48.00 g/mol)
Molar mass of CuNO₃ = 63.55 + 14.01 + 48.00 = 125.56 g/mol.
Find the number of moles of CuNO₃⁺:
Number of moles = mass / molar mass = 6.89 g / 125.56 g/mol ≈ 0.0549 mol.
Use the molarity formula to find the volume of the solution:
M = moles of solute / volume of solution (in liters)
0.460 M = 0.0549 mol / volume
Volume = 0.0549 mol / 0.460 M ≈ 0.119 L (or 119 mL).
Therefore, the volume of the solution is approximately 119 mL.
When 1.187 g of a metallic oxide is reduced with excess hydrogen 1.054 g of the metal is produced. what is the metallic oxide?
Answer: The metallic oxide formed will be [tex]Cu_2O[/tex]
Explanation:
We are given a metallic oxide, having general chemical formula [tex]M_2O_n[/tex]
We are given:
Mass of metallic oxide = 1.187 g
Mass of metal = 1.054 g
Mass of oxygen = 1.187 - 1.054 = 0.133 g
To calculate the number of moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] .......(1)
Given mass of oxygen = 0.133 g
Molar mass of oxygen = 16 g/mol
Putting values equation 1, we get:
[tex]\text{Moles of oxygen}=\frac{0.133g}{16g/mol}=0.0083mol[/tex]
Number of moles of metal in the oxide is twice than the number of moles of oxygen
Number of moles of metal = [tex](2\times 0.0083)=0.0166[/tex] moles
Now, calculating the molar mass of metal by using equation 1, we get:
Moles of metal = 0.0166 moles
Mass of metal = 1.054 g
Putting values in equation 1, we get:
[tex]0.0166mol=\frac{1.054g}{\text{Molar mass of metal}}\\\\\text{Molar mass of metal}=\frac{1.054g}{0.0166mol}=63.49g/mol[/tex]
The metal having 63.49 g/mol as molar mass is copper
Hence, the metallic oxide formed will be [tex]Cu_2O[/tex]
A container of hydrogen gas has a volume of 1.46 liters, a pressure of 2.18 atm, and a temperature of 185 Kelvin. How many moles of gas are in the container?
Assume ideal gas behavior.
The answer is ______ mol.
You have lost nearly 6 inches of top soil on your 200 acre field in the last 10 years. The problem seems to be getting even worse as drought has taken hold of your area. What are some possible solutions that you would consider to reduce your soil erosion problem?
A 12.0 L gas cylinder is filled with 8.00 moles of gas. The tank is stored at 35°C. What is the pressure in the tank?
a sample of gas with a mass of 1.70 g occupies a volume of 961 ml at a pressure of 728 torr and a temperature of 21°C. what is the molar mass of the gas?
What is the concentration of nitrate ion in a 425 mL solution containing 32.0 g of Mg(NO3)2 (M = 148.3)?
Answer:
[tex]M=1.02M[/tex]
Explanation:
Hello,
In this case, we compute the concentration as the molarity of the nitrate ion as the ratio between the nitrate ion moles and the volume of the solution as shown below:
[tex]M_{NO_3^-}=\frac{n_{NO_3^-}}{V_{solution}}[/tex]
Now, the nitrate ion moles are computed considering that in mole of magnesium nitrate, there are two moles of the nitrate ion:
[tex]n_{NO_3^-}=32.0gMg(NO_3)_2*\frac{1molMg(NO_3)_2}{148.3gMg(NO_3)_2}*\frac{2molNO_3^-}{1molMg(NO_3)_2}\\n_{NO_3^-}=0.432molNO_3^-[/tex]
Finally, the requested molarity turns out into:
[tex]M_{NO_3^-}=\frac{0.432molNO_3^-}{0.425L}\\M=1.02M[/tex]
Best regards.
Final answer:
To calculate the nitrate ion concentration, convert the mass of magnesium nitrate to moles, convert volume to liters, determine the molarity of magnesium nitrate, and then multiply by 2, since each formula unit yields two nitrate ions. The concentration of nitrate ion is 1.0146 M.
Explanation:
The student is asking how to calculate the concentration of nitrate ion in a solution with a known volume and mass of magnesium nitrate. We can start by finding the molarity of magnesium nitrate and then use stoichiometry to determine the concentration of nitrate ions.
First, convert the mass of Mg(NO3)2 to moles:
Moles of Mg(NO3)2 = mass (g) / molar mass (g/mol)
32.0g / 148.3g/mol = 0.2156 mol
Next, convert the volume from mL to L:
425 mL * (1L / 1000 mL) = 0.425 L
Now calculate the molarity of the Mg(NO3)2 solution:
Molarity (M) = moles / volume (L)
0.2156 mol / 0.425 L = 0.5073 M
Each unit of Mg(NO3)2 gives two nitrate ions, so the concentration of nitrate ion is:
Concentration of NO3- = 2 × molarity of Mg(NO3)2
2 × 0.5073 M = 1.0146 M
Therefore, the concentration of nitrate ion in the solution is 1.0146 M.
what are radial wave function and angular wave function
The radial wave function represents the radial behavior of the electron, while the angular wave function describes the orientation and shape of the electron orbital.
Explanation:The radial wave function and angular wave function are components of the wave function in quantum mechanics.
The radial wave function, denoted by R, depends only on the radial coordinate r and represents the probability density of finding an electron at a certain distance from the nucleus. It is responsible for the radial behavior of the electron.
The angular wave function, denoted as φ (phi), depends on the polar angle θ (theta) and azimuthal angle φ (phi). It describes the orientation and shape of the electron orbital.
From the following data for the first-order gas-phase isomerization of CH3NC at 215 C, calculate the first-order rate constant and half-life for the reaction:
Time (s) Pressure CH3NC(torr)
0 502
2000 335
5000 180
8000 95.5
12000 41.7
15000 22.4
k = ?
t1/2 = ?
The rate constant of the reaction is 0.0002 s-1.
Using the formula;
lnC = lnCo - kt
Where;
C = concentration at time t
Co = initial concentration
k = rate constant
t = time taken
ln(335) = ln(502) - k(2000)
k = ln(335) - ln(502)/(-2000)
k = 5.8 - 6.2/(-2000)
k = 0.0002 s-1
For a first order reaction;
t1/2 = 0.693/k
t1/2 = 0.693/ 0.0002 s-1
t1/2 =3465 s
Learn more about first order reaction: https://brainly.com/question/1195122
At 50 C(celcius), Kc = 2.2 x 10^3 for the reaction 3 Fe (s) + 4 H2O (g) ? Fe3O4 (s) + 4 H2 (g) What is the value of Kp at 200oC for this reaction? A) 8.8 x 103 B) 2.2 x 103 C) 5.5 x 102 D) 3.5 x 104 E) This question cannot be answered with the information provided
At 1050 K, Kp = 0.900 for the following reaction: H2(g) + CO2(g) ? H2O(g) + CO(g) If 0.200 atm of H2 and 0.200 atm of CO2 are admitted into a rigid container and allowed to reach equilibrium, what should the equilibrium partial pressure of CO be (in atm)? [enter number with three decimal places]
In an exothermic equilibrium reaction, increasing the reaction temperature favors the formation of reactants. A) True B) False
The equilibrium-constant expression for a reaction written in one direction is the reciprocal of the one for the reaction written for the reverse direction. A) True B) False
The value of Kp at 200°C for the given reaction is 2.2 x 10^3. The equilibrium partial pressure of CO in the reaction H2(g) + CO2(g) ? H2O(g) + CO(g) is 0.200 atm. Increasing the temperature in an exothermic equilibrium reaction favors the formation of products, not reactants. The equilibrium-constant expressions for a reaction and its reverse are related by the reciprocal of each other.
Explanation:To determine the value of Kp at 200°C for the reaction 3 Fe (s) + 4 H2O (g) ? Fe3O4 (s) + 4 H2 (g), we can use the relationship between Kc and Kp. Since the reaction involves gases, we can use the equation Kp = Kc(RT)Δn, where Δn is the change in the number of moles of gas. In this case, there is no change in the number of moles of gas, so Δn = 0. Therefore, the value of Kp is equal to the value of Kc, which is given as 2.2 x 10^3 at 50°C. Thus, the value of Kp at 200°C is also 2.2 x 10^3.
To calculate the equilibrium partial pressure of CO in the reaction H2(g) + CO2(g) ? H2O(g) + CO(g), first, we need to determine the initial partial pressures of H2 and CO2. Both gases have a partial pressure of 0.200 atm when admitted into the rigid container. Since the reaction is at equilibrium, the equilibrium partial pressure of CO is the same as the initial partial pressure of CO2, which is 0.200 atm.
The statement that increasing the temperature favors the formation of reactants in an exothermic equilibrium reaction is False. In an exothermic reaction, the formation of products is favored with an increase in temperature. The reaction releases heat, so increasing the temperature shifts the equilibrium position towards the products.
The statement that the equilibrium-constant expression for a reaction written in one direction is the reciprocal of the one for the reaction written for the reverse direction is False. The equilibrium-constant expression for a reaction and its reverse are related by the reciprocal of each other, but they are not exactly the same.
Learn more about Equilibrium Reactions here:https://brainly.com/question/35821841
#SPJ2
Atoms in molecules share pairs of electrons when they make what type of bonds?
Add electron dots and charges as necessary to show the reaction of calcium and oxygen to form an ionic compound.
Calcium (Ca) donates two electrons to become Ca2+, and oxygen (O) each accepts an electron to become O2-. The Ca2+ and O2- ions combine in a 1:1 ratio to form the electrically neutral ionic compound, CaO, known as calcium oxide.
Explanation:Let's consider the Lewis symbols for each element to show the reaction of calcium and oxygen forming an ionic compound. Calcium (Ca), with an atomic number of 20, has two electrons in its outermost shell. Oxygen (O), with an atomic number of 8, has six electrons in its outermost shell and needs two more to achieve a full octet.
During the reaction, calcium donates its two electrons, one each going to two separate oxygen atoms. This results in calcium becoming a Ca2+ ion, losing its two outermost electrons. Upon receiving an electron, each oxygen atom becomes an O2- ion. The formation of these ions can be illustrated with Lewis symbols and arrows:
[Ca] 0 → [Ca]2+ + 2[e-]
[O]0 + [e-] → [O]2-
The positive charge of the calcium ion and the negative charges of the oxygen ions attract each other, and as a result, they come together to form the ionic compound calcium oxide, CaO. Since the ratio between Ca2+ and O2- needs to be 1:1 to balance the charges, the final compound formula is simply CaO, showing the combination of one calcium ion with one oxygen ion.
A sample of gas of 752 torr and occupies a volume of 5.12 L. What will the new volume be when the pressure is increased to 1.5 ATM
According to Boyle's law and as 1 atmosphere= 760 torr the new volume when pressure is increased to 1.5 atmospheres is 3.37 L.
What is Boyle's law?Boyle's law is an experimental gas law which describes how the pressure of the gas decreases as the volume increases. It's statement can be stated as, the absolute pressure which is exerted by a given mass of an ideal gas is inversely proportional to its volume provided temperature and amount of gas remains unchanged.
Mathematically, it can be stated as,
P∝1/V or PV=K. The equation states that the product of of pressure and volume is constant for a given mass of gas and the equation holds true as long as temperature is maintained constant.
According to the equation the unknown pressure and volume of any one gas can be determined if two gases are to be considered.That is,
P₁V₁=P₂V₂
Substitution in above equation gives V₂=0.989×5.12/1.5=3.37 L.
Thus, the new volume of gas is 3.37 L.
Learn more about Boyle's law,here:
https://brainly.com/question/1437490
#SPJ2
what is the common name of the group whose members are characterized by endoskeleton and a unique water vascular system
a. Medusas
b. Echinoderms
c. Brachiopods
d. Tunicates
need now worth 25 points if correct will give the brainly-est
Answer:
answer b
Explanation:
a 1.1 mole sample of Kr has a volume of 371mL. How many moles of Kr are in a 2.85L sample at the same temperature and pressure
modify methionine, below to show its zwitterion form.
How do I make Methionine into a zwitterion?
Explanation :
Zwitter ion : An ion or molecule having separate negatively and positively charged groups.
Methionine is an amino acid with sulfur atom in its molecule .The proton from carboxylic group with get attached to amino group present in the methionine and negative charge will be generated on oxygen atom of a carboxylic group which will get in conjugation with an another oxygen atom of the carboxylic group.
The positive charge will generated on the nitrogen atom due attachment of the proton from the carboxylic group.
As shown in the image attached.
To form the zwitterion of methionine, the amino group gains a proton to become -NH₃⁺, while the carboxyl group loses a proton to become CO²⁻, resulting in a molecule with no overall electrical charge.
To convert methionine to its zwitterion form, you need to recognize the conditions under which amino acids typically exist as zwitterions. The zwitterion form of an amino acid has both a positive charge and a negative charge, but the overall molecule is electrically neutral. Methionine, which has the chemical formula CH₃SCH₂CH₂CH(NH₂)CO₂H, will have its amino group (-NH₂) gain a proton to become -NH₃⁺, and the carboxyl group (CO₂H) lose a proton to become CO²⁻. This results in a molecule with a positively charged ammonium (NH₃⁺) at one end and a negatively charged carboxylate (CO²⁻) at the other, thus forming the zwitterion.
At the biological pH of approximately 7.4, or the isoelectric point of methionine, the molecule will adopt this zwitterionic form naturally. It's important to note that methionine is the only common amino acid with sulfur in its side chain (R group). As with alanine and other amino acids, this zwitterionic form is more soluble in water, has a high melting point, and is less soluble in nonpolar solvents.