Answer:
Secondary .
Explanation:
Primary amine contains only one alkyl group.
Secondary amine contains two alkyl groups.
Tertiary amine contains three alkyl groups.
Since (C₆H₁₄)₂NH contains 2 alkyl groups.So, it is secondary amine.
Answer:
Secondary
Explanation:
Because of this amount of hydrogens being substituted, we can classify the amines in primary (R-NH2), secondary (R1R2NH) and tertiary (R1R2R3N) amines. In the primary amines, only one of the hydrogens is replaced by an organic radical, for example, in the following CH3 - NH2 molecule, in the secondary we have the substitution of two hydrogen atoms, as in the case of CH3 - NH - CH3 and in the tertiary all are replaced.
In the molecule (C6H14) 2NH, the bold part shows the substitution of two hydrogen, so we can classify the molecule as a secondary amine.
what is the molecular formula of ferrous nitrate and ferric nitrate
When H+ forms a bond with H2O to form he hulydronium ion H3O+, this bond is called a coordinate covalent bond because ?
Answer:
Because both the bonding electrons come from the oxygen atom.
Explanation:
A coordinate covalent bond is formed when both the bonding electrons are coming from the same atom.
Here in the given situation, when H+ forms a bond with the water molecule [tex] H _ 2 O [/tex] to form the hydronium ion [tex] H _ 3 O + [/tex], then it is referred to as a coordinate covalent bond since both the bonding electrons are coming from the oxygen atom.
Answer:
Both the shared electrons come from single atom
Explanation:
Coordinate covalent bond is a type of bond in which both the shared pair of electrons are come from single bond. Whereas in simple covalent bond, sharing electrons come from both the participant atoms.
Coordinate covalent bond is also called dative bond and the atom which share both the electrons are called donar atom.
For a coordinate covalent atom to from, one participant atom should have lone pair of electron and other atom should be deprived of electrons.
In [tex]H_2O[/tex] molecule, O atom has lone pair of electrons while H+ ions has deficiency of electrons, so O atom shares its lone pair of electrons with H+ ions which results in the formation of coordinate covalent bond and forms [tex]H_3O^+ molecules[/tex].
what is the [OH-] in a solution with a poh of 3.90
Answer: The hydroxide ion concentration is [tex]1.26\times 10^{-4}M[/tex]
Explanation:
pOH is defined as the negative logarithm of hydroxide ion concentration in the solution.
To calculate the pOH of the reaction, we use the equation:
[tex]pOH=-\log[OH^-][/tex]
where,
[tex]pOH=3.90[/tex]
Putting values in above equation, we get:
[tex]3.90=-\log[OH^-][/tex]
[tex][OH^-]=1.26\times 10^{-4}M[/tex]
Hence, the hydroxide ion concentration is [tex]1.26\times 10^{-4}M[/tex]
Answer: 1.26 x 10 -4
Explanation:
Which of the following is the best name for a compound made from calcium and bromine? (CaBr2) calcium bromide calcium dibromide monocalcium dibromide calcium bromine II
Answer:
Calcium Bromide
Explanation:
Metals like Calcium reacts with halogens like bromine to form Metal halides.
Metal + Halogen → Metal halide
The generally accepted names for compounds and elements are the IUPAC names,
Therefore for calcium and bromine, the IUPAC name of the salt formed is calcium bromide.
Answer:
Calcium bromide
Explanation:
Calcium bromide is mainly used as dense aqueous solutions for drilling fluids. It is also used in medicines, freeze mixtures and photography.
The nomenclature follows the general rule:
Anion Name + Cation Name
But this is only effective for those salts that are classified as simple salts, which means, salts that dissociate into water and form only one cation and one anion.
When we work with a salt called double, for example, this rule goes through some adjustments. It is one that presents in its constitution the presence of two cations accompanying an anion or two anions accompanying a cation. For this reason, when these salts undergo the dissociation phenomenon in water, they release two cations or two anions, depending on the salt with which they are working.
The double salt that has in its constitution two cations accompanying an anion is called double salt as the cation. To name such a salt, we must use the following naming rule:
Anion name + name of the two cations
The name of each cation is written according to the order of electropositivity. Thus, the most electropositive cation will be written first.
A potassium ion can combine with several monatomic and polyatomic ions to form compounds.
An example of a potassium compound containing both ionic and covalent bonds is ___, and an example containing only ionic bonds is ___
(plato pre:chemical bonding )
Final answer:
Potassium nitrate (KNO3) contains both ionic and covalent bonds within the compound, while potassium sulfate (K2SO4) is an example of a compound containing only ionic bonds.
Explanation:
An example of a potassium compound containing both ionic and covalent bonds is potassium nitrate (KNO3), and an example containing only ionic bonds is potassium sulfate (K2SO4).
Potassium nitrate is composed of potassium ions (K+) and nitrate ions (NO3−), with the nitrate being a polyatomic ion held together by covalent bonds between nitrogen and oxygen atoms. This compound demonstrates ionic bonding between potassium and nitrate ions, as well as covalent bonding within the nitrate ion itself.
On the other hand, potassium sulfate is made up of potassium ions (K+) and sulfate ions (SO42−). This compound is purely ionic, with the bonds forming from the electrostatic attraction between the positively charged potassium ions and the negatively charged sulfate ions.
What type of matter is 500 grams of silver combined with gold?
Answer:
A Mixture of two elements
Explanation:
A sample of an unknown compound has a percent composition of 52.14% carbon, 13.13% hydrogen, and 34.73% oxygen. Which compounds could
the sample be?
CH3CH3CH202
C2H5OH
C4H10o2
C4h12o2 and ch3ch3ch2ooh
To determine which compounds an unknown sample could be, based on its percent composition, involves calculating the empirical formula from the given percentages and comparing it with the provided compound options.
Explanation:The question involves determining which compounds an unknown sample could be, based on its percent composition of 52.14% carbon, 13.13% hydrogen, and 34.73% oxygen. This requires an understanding of percent composition and the ability to calculate an empirical formula based on the given percentages. Given the complexity of the sample compositions and potential empirical formulas, it's essential to evaluate each option through stoichiometric calculations and compare their empirical formulas derived from the provided compositions to the actual compounds mentioned.
Fission of uranium-235 products energy and ______
A. isotopes of smaller elements
B. isotopes of larger elements C. lighter isotopes of uranium D. heavier isotopes of uranium
Answer:
A
Explanation:
During fission, heavier unstable atoms are split into lighter and more stable atoms with the release of energy. Fission of Uranium-235 produces Barium and Krypton (which are lighter and more stable atoms) and neutrons. Barium has an atomic mass of 141 while that of Krypton is 92.
Answer:
a
Explanation:
The molar mass of cadmium chloride is 183 g. what mass of CdCl2 would be present in 10.0 mL of 9 M solution?
The mass of CdCl₂ present in 10.0 mL of a 9 M solution is 16.47 grams.
Given:
Molar mass of CdCl₂ = 183 g/mol
Volume of solution = 10.0 mL = 0.010 L
Molarity of solution (concentration) = 9 M
The molarity (M) of a solution is defined as the number of moles of solute per liter of solution.
Molarity is commonly used to express the concentration of solutions in various chemical reactions and experiments.
To calculate the moles of CdCl₂:
Moles = Molarity x Volume
Moles = 9 M x 0.010 L
Moles = 0.09 mol
Now, to calculate the mass of CdCl₂:
Mass = Moles x Molar mass
Mass = 0.09 mol x 183 g/mol
Mass = 16.47 g
To learn more about the mass, follow the link:
https://brainly.com/question/11954533
#SPJ6
What type of solution is formed if 10 g of kclo3 are dissolved in 100g of water at 30
Answer:
Saturated solution.
Explanation:
Kindly see the attached image, the curve with brown line is for KClO₃, and according to the curve at 30 °C the solubility of KClO₃ per 100 g of water is 10 g.So, 10.0 g of KClO₃ forms a saturated solution.
When 10 g of KClO₃ are dissolved in 100 g of water at 30 degrees Celsius, a saturated solution is likely formed because the solubility of KClO₃ increases with temperature and is sufficient to dissolve this amount at 20 degrees Celsius.
The question is referring to the process of dissolving a chemical compound in water, which is a chemistry topic commonly studied in high school. When 10 g of KClO₃ (potassium chlorate) are dissolved in 100 g of water at 30℃, the type of solution that is formed depends on the solubility of KClO₃ at that temperature. Assuming the question implies 30 degrees Celsius, potassium chlorate has a solubility of about 7 g per 100 mL of water at 20℃. Since solubility generally increases with temperature, it's likely that the 10 g of KClO₃ will fully dissolve in 100 g of water at 30℃ to form a saturated solution. If all the solute dissolves, the solution is known as saturated; if the solute does not fully dissolve, any undissolved solute would result in a supersaturated solution if the excess was initially forced to dissolve under different conditions, or an unsaturated solution if there is still room for more solute to dissolve.
Determine the enthalpy change of the following reaction: 2KClO3 -> 2KCl + 3O2
Given enthalpies:
KClO3: -391.4 kJ/mol
O2: 0 kJ/mol
KCl: -436.7 kJ/mol
Answer:
- 90.6 kJ/mol.
Explanation:
The enthalpy change of the reaction (ΔHrxn) is the difference between the sum of heat of formation of products and reactants.ΔHrxn = ∑ΔHf(products) - ∑ΔHf(reactants)
For the reaction: 2KClO₃ → 2KCl + 3O₂,
∴ ΔHrxn = ∑ΔHf(products) - ∑ΔHf(reactants)
∴ ΔHrxn = [(2*ΔHf(KCl)) + (3*ΔHf(O₂))] - [(2*ΔHf(KClO₃))] = [(2*(- 436.7 kJ/mol)) + (3*(0)] - [(2*(- 391.4 kJ/mol)] = [- 873.4 kJ/mol] - [- 782.8 kJ/mol] = - 90.6 kJ/mol.
The enthalpy change of the reaction 2KClO3 -> 2KCl + 3O2 is calculated by subtracting the sum of the enthalpies of the reactants from the sum of the enthalpies of the products. The calculation results in an enthalpy change of 90.6 kJ, meaning the reaction is endothermic.
Explanation:The enthalpy change of the reaction can be calculated by subtracting the sum of the enthalpies of the reactants from the sum of the enthalpies of the products. This is also known as Hess's law.
In this reaction, the reactants are 2 moles of KClO3 and the products are 2 moles of KCl and 3 moles of O2. Hence, the enthalpy of the reaction can be calculated as follows:
Enthalpy change = [2 * (-391.4 kJ/mol)] - [2 * (-436.7 kJ/mol) + 3 * 0 kJ/mol]
= (-782.8 kJ) - (-873.4 kJ)
= 90.6 kJ
Therefore, the enthalpy change of this reaction is 90.6 kJ. If the enthalpy change is positive, the reaction is endothermic meaning it absorbs heat from the surroundings.
Learn more about Enthalpy Change here:https://brainly.com/question/35890036
#SPJ6
write the complete equation for the neutralization reactions that take place when the following water solutions are mixed.
1.) KOH(aq) + HF(aq)
2.) HCl(aq) + LiOH(aq)
3.) H2SO4(aq) + NaOH(aq)
Absalon adds 1 g of salt to 1 L of room temperature water (25 °C). Then, he starts a timer and observes what happens. He notices that it takes 1 minute for the salt to dissolve. He decides to repeat his experiment, and he adds 1 g of salt to another 1 L of room temperature water (25 °C). After he adds the salt, he starts a timer. But, instead of watching the salt dissolve, he stirs the salt and water with a spoon until it dissolves. He notices that it only takes 30 seconds for the salt to dissolve in his second experiment.
Why does the salt dissolve faster in Absalon's second experiment?
Stirring the salt and water increases the polarity of the water molecules, which causes the ionic bonds of the salt to break.
Stirring the salt and water increases particle motion, which causes more collisions to occur between the water and salt.
Stirring the salt and water increases the surface area of the water, which causes more collisions to occur between the water and salt.
Stirring the salt and water increases the pressure on the solution, which causes the ionic bonds of the salt to break.
Answer:
B
Explanation:
I looked it up and found the answer lol
Answer: Option (b) is the correct answer.
Explanation:
When Absalon stirred the solution which is containing salt in water then there will occur disturbance into solution due to stirring.
As a result, particles will come in motion and hence, they tend to gain more kinetic energy. Due to which there will be more number of collisions between the solute (salt) and solvent (water) particles.
Hence, rate of reaction will increase and because of this salt will readily dissolve into water.
Thus, we can conclude that the salt dissolve faster in Absalon's second experiment because stirring the salt and water increases particle motion, which causes more collisions to occur between the water and salt.
Mercury-203 undergoes beta minus decay. 203 80 Hg → 203 81 Tl + ? The subatomic particle produced is a(n) . 203 80 Hg → 203 81 Tl + 0 -1 e Is this the correct balanced equation? .
Answer:
A negative beta particle
Yes
Explanation:
The incomplete equation of the reaction:
²⁰³₈₀Hg → ²⁰³₈₁Tl + ?
In order to balance nuclear equations, we must conserve the mass number and atomic number.
For the mass number; 203 = 203 + a
a = 0
Atomic number; 80 = 81 + b
b = -1
The unknown has no mass number but an atomic number of -1
This a negative beta particle and it is designated as ⁰₋₁e
Answer:
1) Electron
2) Yes
what are the properties of clay soils? check all that apply
1.is loose
2.retains water
3.drains quickly
4.are fine grained
5.have coarse particles
Answer: 2.retains water, 4. are fine grained
Explanation:
Clay is a kind of soil. It exhibit fine grained particles. It retains the organic matter and inorganic minerals. The ability to retain water is because of fine grained size aggregate of clay. As this kind of soil can retain moisture and exhibit minerals it is suitable for the growth of plants.
What is a scientific theory?
A. A scientist's guess about how something works
B. The results of an experiment obtained using the scientific method
c. A proven fact that will never change
D. An idea that is backed by data from many sources
The scientific theory is "an idea that is backed by data from many sources".
What is scientific theory?A scientific theory would be a justification for a feature of the natural world as well as the universe that already has undergone repeated testing and confirmation through using established procedures for observation and measurement but also outcome from evaluation.
What is source?The source would be defined as the origin of somebody else.
Therefore, the scientific theory is "an idea that is backed by data from many sources".
To know more about scientific theory and sources
https://brainly.com/question/2375277
#SPJ2
What happens to an atom of sulfur (S) if it loses an electron?
Answer:
An atom becomes anion when it gains or loses electrons. The ions that are formed when an atom loses electrons are positively charged because they have more protons in the nucleus than electrons in the electron cloud.
Explanation:
Please mark brainliest and have a great day!
Answer: Sulfur atom will form a cation on loosing electrons.
Explanation:
There are 3 subatomic particles present in an atom. They are: protons, electrons and neutrons.
Protons carry positive charge, electrons carry negative charge and neutrons does not carry any charge.
Any neutral atom has equal number of protons and electrons.
An ion is formed when atom looses or gain electron.
If an atom gains electrons, it will have more number of electrons than protons. Thus, it will carry negative charge and form an anion.
If an atom looses electrons, it will have less number of electrons than protons. Thus, it will carry positive charge and forms a cation.
It is given that sulfur atom looses an electron. So, this atom will have more number of protons than electrons. Thus, it will form a cation.
Hence, sulfur atom will form a cation on loosing electrons.
How does temperature affect the Keq of a reaction?
Answer:
D. Changing the temperature will change Keq.
Explanation:
The equilibrium constant expresses the relationship between the molar concentration of reactants and products. This constant is the Keq. It is temperature dependent and constant at a given temperature.
A change in temperature of an equilibrium system shifts the system to a new equilibrium point. A rise in temperature shifts the equilibrium position to the direction that absorbs heat and vice versa.
In summary, a shift in equilibrium which results from temperature change is actually a change in value of the equilibrium constant.
Answer: D. changing the temperature will change the K eq
Explanation:
We know we are originated from the combination of elements but where did the elements and compound came from. Where did the proton neutron electron or smallest particle came? Then Does god exists?Plz give me a good reason.
How does science use models to gain a better understanding of concepts?
Answer:In science, a model is a representation of an idea, an object or even a process or a system that is used to describe and explain phenomena that cannot be experienced directly. Models are central to what scientists do, both in their research as well as when communicating their explanations.
Explanation:
Explain why HCl (aq) cannot be used to acidify KMnO4 (aq) while ur can be used to acidify K2Cr2O7 (aq).
Answer:
HCL being a strong electrolyte dissociates in water to give H+ and Cl- ions. KMnO4 being a strong oxidising agent oxidises Chloride ion(Cl-) to Cl2. ... Hence more amount of KMnO4 is usedup which results in error in reading. The situation is completely the opposite with K2Cr2O7.
hope this helps
need asap
What is the role of the cell wall in plant cells?
Answer:
The cell wall in plant cells is responsible for cell protection, providing structural support, and giving shape to the cell.
Explanation:
The cell wall in plant cells is responsible for cell protection, providing structural support, and giving shape to the cell.
What is scientific law how does a hypothesis become a law
Answer:
In general, a scientific law is the description of an observed phenomenon. It doesn't explain why the phenomenon exists or what causes it. The explanation of a phenomenon is called a scientific theory. It is a misconception that theories turn into laws with enough research.
Explanation:
Answer:
A scientific law is a description of an observed phenomenon.this is not an explanation of a phenomenon but a description.
Hypothesis becomes a law when they follow a line of reasoning and formulate a theory.then once a theory has been evaluated through a series of testing it becomes a law.
Hope this helps and if it does pls mark as brainliest answer
what is the specific heat of a substance that absorbs 2.5×10^3 joules of heat when a sample of 1.0 ×10^4g of the substance increases in temperature from 10°c to 70°c?
Answer:
0.004167 J/g°C is the specific heat of a substance.
Explanation:
[tex]Q=m\times c\times \Delta T[/tex]
[tex]Q=m\times c\times (T_{2}-T_1)[/tex]
Where:
Q = heat absorbed(positive) or released (negative)
m = Mass of substance
c = specific heat of a substance
[tex]T_1[/tex] = Initial temperature
[tex]T_2[/tex] = Final temperature
We have:
m = [tex]1.0\times 10^4 g[/tex]
c = ? , [tex]T_1=10^oC,T_2=70^oC[/tex]
Q = [tex]2.5\times 10^3 J[/tex]
[tex]2.5\times 10^3 J=1.0\times 10^4 g\times c\times (70^oC-10^oC)[/tex]
[tex]c=\frac{2.5\times 10^3 J}{1.0\times 10^4 g\times (70^oC-10^oC)}[/tex]
[tex]c=0.004167 J/g^oC[/tex]
0.004167 J/g°C is the specific heat of a substance.
Can someone help me with 1 to 8 ? I will mark you Brainliest.
Answer:
1. scientist
2. society
3. We can communicate to people across the world in a fraction of a second, our grandparents would've had to pay an extra fee to call anyone outside of the country. We've also made progress in medicine, making diseases like cancer more treatable.
4. Passion, determination, and intelligence.
5. You could ask yourself what factors do the other trees have that the unhealthy tree not have and then create an experiment as to how the variable missing from the unhealthy tree affects plants.
6. Life science was affected by each of these branches.
7. Investigations take a long time because of observations, forming hypothesis, creating an experiment and analyzing the data and then revizing the experiment and the hypothesis. This can take years and cannot be limited to one year.
8. The contributions of these scientists are absolutely still valuable, without these contributions many of the things we know in the modern world wouldn't be known today. Such as the types of organelles and their functions, the periodic table, and the importance of oxygen for human beings.
Explanation:
Match the formula for the following compound:
magnesium sulfate heptahydrate
MgS·7H2O
Mg2SO4·7H2O
Mg(SO4)2·7H2O
MgSO4·7H2O
valence of magnesium is 2
and valence of sulfate-ion is 2 too
answer: MgSO4•7H2O
Answer: [tex]MgSO_4.7H_2O[/tex]
Explanation:
[tex]MgSO_4[/tex] is an ionic compound because aluminium element is a metal and hydrogen element is a non-metal. The bond formed between a metal and a non-metal is always ionic in nature.
The nomenclature of ionic compounds is given by:
1. Positive is written first.
2. The negative ion is written next and a suffix is added at the end of the negative ion. The suffix written in case of [tex]SO_4^{2-}[/tex] is '-ate'.
Hence, the name of [tex]MgSO_4[/tex] is magnesium sulphate.
The water of crystallization is written as hydrate with the number of water molecules. As the name is heptahydrate, that means 7 water molecules are present.
Therefore, the correct answer is [tex]MgSO_4.7H_2O[/tex]
Which of the following statements is true?
An atom consists of protons, electrons, and neutrons.
An atom consists of protons and neutrons.
An atom consists of electrons bonded to one another.
An atom consists of protons bonded to one another.
Answer:
The first option
Explanation:
Answer:
First Question, A, An atom consists of protons, electrons, and neutrons.
Second Question, B, A nucleus consists of protons and neutrons.
Explanation:
An unknown substance is a white solid at room temperature and has a melting point of 78 °C. Which of the following substances is most likely to be the identity of the unknown sample?
A. Naphthalene, a molecular solid with the formula C10H8
B. Silica, a network solid held together by covalent bonds with the formula SiO2
C. Calcium chloride, an ionic compound with the formula CaCl2
D. Water, an molecular compound with the formula H2O
The unknown solid with melting point of 78 degrees Celsius has been the molecular solid Naphthalene with formula [tex]\rm C_1_0H_8[/tex]. Thus, option A is correct.
Melting point has been defined as the temperature that has been able to transfer the solid to the liquid state.
The melting point has been higher for the substances with strong intermolecular interactions, and lower for weak attractive compounds.
Identity of the unknown sampleThe unknown sample has a melting point of 78 degree Celsius.
The molecular compounds have high melting point with strong intermolecular interactions, and ionic and covalent compounds have low melting point with weak intermolecular interactions.
The melting point of water has been zero degree Celsius.
Thus, the unknown solid with melting point of 78 degrees Celsius has been the molecular solid Naphthalene with formula [tex]\rm C_1_0H_8[/tex].
Thus, option A is correct.
Learn more about melting point, here:
https://brainly.com/question/25777663
The most likely identity of the unknown white solid with a melting point of 78 °C is naphthalene, a molecular solid with the formula C10H8, commonly used in mothballs.
Explanation:If the unknown substance is a white solid at room temperature and has a melting point of 78 °C, the most likely candidate from the given options would be naphthalene, which is a molecular solid. This substance has the formula C10H8 and is well-known for its use in mothballs. It has a melting point close to the given temperature, whereas the other given substances have significantly higher melting points and different chemical and physical properties.
SiO2, or silica, is a covalent network solid and CaCl2, or calcium chloride, is an ionic compound. Both have melting points that are much higher than 78 °C. Meanwhile, H2O, water, is a molecular compound that is not a solid at room temperature, as it has a melting point of 0 °C. Therefore, option A, naphthalene, is the most likely identity of the unknown solid.
Identify the Lewis base in this balanced equation: Fe3+ H2O Fe(H2O)63+
Answer:H20
Explanation:
because it is the base that contributes electrons
Answer : The Lewis-base in this reaction is, water [tex]H_2O[/tex]
Explanation :
According to the Lewis acid-base theory,
Lewis acid : It is a substance that can accepts pairs of electrons to form a covalent bond.
Lewis-base : It is a substance that can donates pairs of electrons to form a covalent bond.
The given balanced equation is:
[tex]Fe^{3+}+6H_2O\rightarrow [Fe(H_2O)_6]^{3+}[/tex]
In this reaction, [tex]Fe^{3+}[/tex] ion is Lewis-acid and [tex]H_2O[/tex] is a Lewis-base. The [tex]H_2O[/tex] donates electrons to [tex]Fe^{3+}[/tex] ion to form [tex][Fe(H_2O)_6]^{3+}[/tex].
Hence, the Lewis-base in this reaction is, water [tex]H_2O[/tex]
As a temperature of a fixed volume of a gas increases, the
pressure will what?
As a temperature of a fixed volume of a gas increases, the
pressure will also “INCREASE”