Answer:
Explanation:
Let the position of balance point be x distance from 1.5 µC on the right side . Balance point can not be on the left side or between the charges because in that case electric field by both the charges will be in the same direction .
For equilibrium of field
k x 4.75 µC / ( .35 +x )² - k x 1.5 µC / x ² = 0
4.75 / ( .35 +x )² = 1.5 / x²
( .35 +x )² / x² = 4.75 / 1.5
( .35 +x )² / x² = 3.167
( .35 +x ) / x = 1.78
.35 + x = 1.78 x
.78 x = .35
x = .45 m ( + ve ) to the right of 1.50 µC
b ) When both the charges are positive , balance point will lie in between them because , electric field will be in opposite direction .
For equilibrium of field
k x 4.75 µC / ( .35 - x )² = k x 1.5 µC / x ²
4.75 / ( .35 -x )² = 1.5 / x²
( .35 -x )² / x² = 4.75 / 1.5
( .35 -x )² / x² = 3.167
( .35 -x ) / x = 1.78
.35 -x = 1.78 x
2.78 x = .35
x = .126 m ( - ve ) to the right of 1.50 µC
A voltmeter is connected to the terminals of the battery; the battery is not connected to any other external circuit elements. What is the reading of the voltmeter V? Express your answer in volts. Use three significant figures.
Answer:
12 volts.
Explanation:
Equal to the emf of battery. internal resistance won't count because the internal resistance is only apparent when a current passes through the battery.
The voltmeter reading is the terminal voltage, which is slightly less than the EMF due to the internal resistance of the battery and the small current drawn by the voltmeter. The exact value in volts is not provided due to the unknown internal resistance.
The insulating solid sphere in the previous Example 24.5 has the same total charge Q and radius a as the thin shell in the example here. Consider the electric fields due to the sphere (E_sphere), the shell (E_shell), and a point charge Q (E_Q). Rank the strength of the electric fields due to these three charged objects at the same three points ('1' represents the object with the strongest, '2' for the next in strength and so on. For example, you can have the triad {3, 1, 2} as your answer, or {2, 1, 2} if the shell is strongest while the sphere and the point charge have equal strengths.): r greaterthan a a. {1, 1, 2} b. {2, 1, 1} c. {1, 1, 1} d. {2, 2, 1} e. {1, 2, 3} r lesserthan a a. {2,2, 1} b. {1,1,1} c. {2, 3, 1} d. {2,1,1} e.{1, 2, 1}
Answer and Explanation:
Using Gauss's law,
If r>a
then charge enclosed in all the three cases is same as Q.
So Electric field for all three is same.
So {1,1,1}.
(b) r<a,
Charge enclosed in case of shell is zero since all charge is present on the surface. So E = 0.
Charge enclosed by incase of point charge is Q.
Charge enclosed in case of sphere is Qr3/a3 which is less than Q.
So ranking {2,3,1}
A trombone can produce pitches ranging from 85 Hz to 660 Hz approximately. When the trombone is producing a 562 Hz tone, what is the wavelength of that tone in air at standard conditions?
To solve this problem we will apply the concept of wavelength, which warns that this is equivalent to the relationship between the speed of the air (in this case in through the air) and the frequency of that wave. The air is in standard conditions so we have the relation,
Frequency [tex]= f = 562Hz[/tex]
Speed of sound in air [tex]= v = 331m/s[/tex]
The definition of wavelength is,
[tex]\lambda = \frac{v}{f}[/tex]
Here,
v = Velocity
f = Frequency
Replacing,
[tex]\lambda = \frac{331m/s}{562Hz}[/tex]
[tex]\lambda = 0.589m[/tex]
Therefore the wavelength of that tone in air at standard conditions is 0.589m
The wavelength of the tone in air 0.59 Hz
The trombone can produce pitches wavelength ranging from 85 Hz to 660 Hz
The trombone produces a tone of 562 Hz
The tone of air is at standard conditions, hence the velocity of the sound in air is 331 m/s
velocity= frequency/wavelength
331= 562/wavelength
wavelength= 331/562
= 0.59 HZ
Hence the wavelength of the tone is 0.59 Hz
Please see the link below for more information
https://brainly.com/question/15230292?referrer=searchResults
A block with mass m is pulled horizontally with a force F_pull leading to an acceleration a along a rough, flat surface.
Find the coefficient of kinetic friction between the block and the surface.
Answer:
[tex]\mu_k=\frac{a}{g}[/tex]
Explanation:
The force of kinetic friction on the block is defined as:
[tex]F_k=\mu_kN[/tex]
Where [tex]\mu_k[/tex] is the coefficient of kinetic friction between the block and the surface and N is the normal force, which is always perpendicular to the surface that the object contacts. So, according to the free body diagram of the block, we have:
[tex]N=mg\\F_k=F=ma[/tex]
Replacing this in the first equation and solving for [tex]\mu_k[/tex]:
[tex]ma=\mu_k(mg)\\\mu_k=\frac{a}{g}[/tex]
Clearly, Atwood’s machine has a lot of systematic error that would not be present if we were to simplify the experiment. What is one reason we might expect to get better results using Atwood’s machine rather than following Galileo’s example and just dropping objects off of tall buildings?
Answer:
Better Equilibrium Maintenance for better accuracy...
Explanation:
In the Galileo's experiment, there is no utilization of two equal masses at a time. However, as we can see in a Atwood Machine, there are two equal masses involved that make the whole system to be in a state of equilibrium and ultimately the better measurements of acceleration due to gravity.
A wire 1 mm in diameter is connected to one end of a wire of the same material 2 mm in diameter of twice the length. A voltage source is connected to the wires and a current is passed through the wires. If it takes time T for the average conduction electron to traverse the 1-mm wire, how long does it take for such an electron to traverse the 2-mm wire
Answer:
T = 2 T₀
Explanation:
To answer this question let's write the expression for electrical conductivity
σ = n e2 τ / m*
The relationship with resistivity is
ρ = 1 /σ
Whereby the resistance
R = ρ L / A = 1 /σ L / A
We see that there is no explicit relationship between time and resistance, there is only a dependence on the life time (τ) that depends on the properties of the material, not on its diameter or length.
As also the average velocity or electron velocity of electrons is constant, the time to cross 2 mm in length is twice as long as the time to cross a mm in length
T = 2 T₀
A small toy car draws a 0.50-mA current from a 3.0-V NiCd battery. In 10 min of operation, (a) how much charge flows through the toy car, and (b) how much energy is lost by the battery? 4. (Resistance and Ohm’s law, Prob. 17.16, 1.0 point) How
Answer:
(a) 0.3 C
(b) 0.9 J
Explanation:
(a)
Given:
Current drawn (I) = 0.50 mA = 0.50 × 10⁻³ A
Terminal voltage (V) = 3.0 V
Time of operation (t) = 10 min = 10 × 60 = 600 s
Charge flowing through the toy car 'Q' is given as:
[tex]Q=It[/tex]
Plug in the given values and solve for 'Q'. This gives,
[tex]Q=(0.50\times 10^{-3}\ A)(600\ s)\\\\Q=0.3\ C[/tex]
Therefore, 0.3 C charge flows the toy car.
(b)
Energy lost by the battery is equal to the product of power consumed by the battery and time of operation.
Power consumed by the battery is given as:
[tex]P=VI[/tex]
Plug in the given values and solve for 'P'. This gives,
[tex]P=(3.0\ V)(0.50\times 10^{-3}\ A)\\\\P=1.5\times 10^{-3}\ W[/tex]
Therefore, the energy lost by the battery is given as:
[tex]E=P\times t\\\\E=1.5\times 10^{-3}\ W\times 600\ s\\\\E=0.9\ J[/tex]
Therefore, the energy lost by the battery is 0.9 J
he deflection plates in an oscilloscope are 10 cm by 2 cm with a gap distance of 1 mm. A 100 volt potential difference is suddenly applied to the initially uncharged plates through a 1000 ohm resistor in series with the deflection plates. How long do
Answer:
Incomplete question
This is the complete question
The deflection plates in an oscilloscope are 10 cm by 2 cm with a gap distance of 1 mm. A 100 V potential difference is suddenly applied to the initially uncharged plates through a 1000 Ω resistor in series with the deflection plates. How long does it take for the potential difference between the deflection plates to reach 95 V?
Explanation:
Given that,
The dimension of 10cm by 2cm
0.1m by 0.02m
Then, the area is Lenght × breadth
Area=0.1×0.02=0.002m²
The distance between the plate is d=1mm=0.001m
Then,
The capacitance of a capacitor is given as
C=εoA/d
Where
εo is constant and has a value of
εo= 8.854 × 10−12 C²/Nm²
C= 8.854E-12×0.002/0.001
C=17.7×10^-12
C=17.7 pF
Value of resistor resistance is 1000ohms
Voltage applied is V = 100V
This Is a series resistor and capacitor (RC ) circuit
In an RC circuit, voltage is given as
Charging system
V=Vo[1 - exp(-t/RC)]
At, t=0, V=100V
Therefore, Vo=100V
We want to know the time, the voltage will deflect 95V.
Then applying our parameters
V=Vo[1 - exp(-t/RC)]
95=100[1-exp(-t/1000×17.7×10^-12)]
95/100=1-exp(-t/17.7×10^-9)
0.95=1-exp(-t/17.7×10^-9)
0.95 - 1 = -exp(-t/17.7×10^-9)
-0.05=-exp(-t/17.7×10^-9)
Divide both side by -1
0.05=exp(-t/17.7×10^-9)
Take In of both sides
In(0.05)=-t/17.7×10^-9
-2.996=-t/17.7×10^-9
-2.996×17.7×10^-9=-t
-t=-53.02×10^-9
Divide both side by -1
t= 53.02×10^-9s
t=53.02 ns
The time to deflect 95V is 53.02nanoseconds
A proton moves through a magnetic field at 26.7 % 26.7% of the speed of light. At a location where the field has a magnitude of 0.00687 T 0.00687 T and the proton's velocity makes an angle of 101 ∘ 101∘ with the field, what is the magnitude of the magnetic force acting on the proton?
Answer:
[tex]8.64283\times 10^{-14}\ N[/tex]
Explanation:
q = Charge of proton = [tex]1.6\times 10^{-19}\ C[/tex]
v = Velocity of proton = [tex]0.267\times c[/tex]
c = Speed of light = [tex]3\times 10^8\ m/s[/tex]
B = Magnetic field = 0.00687 T
[tex]\theta[/tex] = Angle = [tex]101^{\circ}[/tex]
Magnetic force is given by
[tex]F=qvBsin\theta\\\Rightarrow F=1.6\times 10^{-19}\times (0.267\times 3\times 10^8)\times 0.00687\times sin101\\\Rightarrow F=8.64283\times 10^{-14}\ N[/tex]
The magnetic force acting on the proton is [tex]8.64283\times 10^{-14}\ N[/tex]
A 25-kg iron block initially at 350oC is quenched in an insulated tank that c ontains 100 kg of water at 18oC. Assuming the water that vaporizes during the process condenses back in the tank, determine the total entropy change during this process.
Answer: 4.08kg/J
Explanation: Please find the attached file for the solution
Answer:
Entropy = 4.08 kj/k
Explanation:
From energy balance in first law of thermodynamics, we have;
Δv(i)+ ΔU(h2o) = 0
Thus;
[MCp(T2 - T1)]iron + [MCp(T2 - T1)]water = 0
Where Cp is specific heat capacity
For iron, Cp = 0.45 Kj/kg°C and for water, Cp = 4.18 Kj/kg°C
From question, Mass of iron =25kg while mass of water = 100kg
And Initial temperature of iron (T1) = 350°C while initial temperature of water(T1) = 18°C
Thus,
[25 x 0.45(T2 - 350)] + [100 x 4.18(T2 - 18)] = 0
11.25T2 - 3937.5 + 418T2 - 7524 = 0
So,
429.25T2 = 11461.5
T2 = 26.7 °C
Now for entropy, we have convert the temperature from degree celsius to kelvins.
Thus, for iron T1 = 350 + 273 = 623K and for water, T1 = 18 + 273 = 291 K. Also, T2 = 26.7 + 273 = 299.7K.
The entropy changes will be;
For iron ;
Δs(i) = MCp(In(T2/T1)) = 25 x 0.45(In(299.7/623)) = -8.23 Kj/k
Now, for water;
Δs(water) = MCp(In(T2/T1)) = 100 x 4.18(In(299.7/291)) = 12.31 kj/k
Thus, total entropy will be the sum of that of iron and water.
Δs(total) = 12.31 kj/k - 8.23 Kj/k = 4.08 kj/k
The electric potential, when measured at a point equidistant from two particles that have charges equal in magnitude but of opposite sign, isA) equal to the net electric field B) smaller than zero C) equal to zero D) equal to the averages of the two distances times the charge E) larger than zero
Answer:
C) equal to zero
Explanation:
Electric potential is calculated by multiplying constant and charge, then dividing it by distance. The location that we want to measure is equidistant from two particles, mean that the distance from both particles is the same(r2=r1). The charges of the particle have equal strength of magnitude but the opposite sign(q2=-q1). The resultant will be:V = kq/r
ΔV= V1 + V2= kq1/r1 + kq2/r2
ΔV= V1 + V2= kq1/r1 + k(-q1)/(r)1
ΔV= kq1/r1 - kq1/r1
ΔV=0
The electric potential equal to zero
For your senior project, you would like to build a cyclotron that will accelerate protons to 10% of the speed of light. The largest vacuum chamber you can find is 60 cm in diameter.
The given question is incomplete. The complete question is as follows.
For your senior project, you would like to build a cyclotron that will accelerate protons to 10% of the speed of light. The largest vacuum chamber you can find is 60 cm in diameter.
What magnetic field strength will you need?
Explanation:
Formula for the strength of magnetic field is as follows.
B = [tex]\frac{mv}{qr}[/tex]
Here, m = mass of proton = [tex]1.67 \times 10^{-27}[/tex] kg
v = velocity = 10% of [tex]3 \times 10^{8}[/tex] = [tex]3 \times 10^{7}[/tex] m/s
q = charge of proton = [tex]1.6 \times 10^{-19} C[/tex]
r = radius = [tex]\frac{60}{2}[/tex] = 30 cm = 0.30 m (as 1 m = 100 cm)
Therefore, magnetic field will be calculated as follows.
B = [tex]\frac{mv}{qr}[/tex]
= [tex]\frac{1.67 \times 10^{-27} \times 3 \times 10^{7}}{1.6 \times 10^{-19} C \times 0.30 m}[/tex]
= [tex]\frac{5.01 \times 10^{-20}}{0.48 \times 10^{-19}}[/tex]
= 1.0437 T
Thus, we can conclude that magnetic field strength is 1.0437 T.
The student queries about the construction of a cyclotron to accelerate protons to a specific velocity. The radius and rotational period of protons within the cyclotron are calculated using the magnetic field strength and the desired velocity.
Explanation:The student is interested in building a cyclotron that can accelerate protons to 10% of the speed of light, with specific constraints on the vacuum chamber dimensions. In physics, particularly in the field of particle accelerators, a cyclotron is a type of particle accelerator that uses a combination of an electric field and a constant magnetic field to increase the kinetic energy of charged particles. The radius of the cyclotron, which determines the maximum orbit size for the particles being accelerated, is a critical design parameter and can be calculated based on the desired kinetic energy of the particles and the strength of the magnetic field.
In the context of a cyclotron, the student might need to calculate the rotational period and maximum radius of proton orbits within given specifications such as the strength of the magnetic field and desired velocity. Understanding the principles behind cyclotrons and particle acceleration is essential for this project, which falls under the umbrella of advanced physics topics.
Daisy walks across a force platform, and forces exerted by her foot during a step are recorded. The peak velocity reaction force is 1200 (this force acts upward on Daisy). At the same instant, the frictional force is 200N(this force acts forward on Daisy).(a) how large is the resultant of these forces(b) What is the direction of the resultant forces?
Answer:
(a). The resultant of these forces is 1216.55 N.
(b). The direction of the resultant forces is 80.53°.
Explanation:
Given that,
First force = 1200 N
Second force = 200 N
(a). We need to calculate the resultant of these forces
Using cosine law
[tex]F=\sqrt{F_{1}^2+F_{2}^2+2F_{1}F_{2}\cos\theta}[/tex]
Put the value into the formula
[tex]F=\sqrt{1200^2+200^2+2\times1200\times200\cos90}[/tex]
[tex]F=\sqrt{1200^2+200^2}[/tex]
[tex]F= 1216.55\ N[/tex]
The resultant of these forces is 1216.55 N.
(b). We need to calculate the direction of the resultant forces
Using formula of direction
[tex]\tan\alpha=\dfrac{F_{1}}{F_{2}}[/tex]
Put the value into the formula
[tex]\alpha=\tan^{-1}(\dfrac{1200}{200})[/tex]
[tex]\alpha=80.53^{\circ}[/tex]
Hence, (a). The resultant of these forces is 1216.55 N.
(b). The direction of the resultant forces is 80.53°.
Answer:
a) [tex]F_r=1216.55\ N[/tex]
b) [tex]\theta=80.54^{\circ}[/tex]
Explanation:
Given:
force acting upward on the, [tex]F_y=1200\ N[/tex]force acting forward on daisy, [tex]F_x=200\ N[/tex]a)
Now the resultant of these forces:
Since the forces are mutually perpendicular,
[tex]F_r=\sqrt{F_x^2+F_y^2}[/tex]
[tex]F_r=\sqrt{200^2+1200^2}[/tex]
[tex]F_r=1216.55\ N[/tex]
b)
The direction of this force from the positive x-direction:
[tex]\tan\theta=\frac{F_y}{F_x}[/tex]
[tex]\tan\theta=\frac{1200}{200}[/tex]
[tex]\theta=80.54^{\circ}[/tex]
Calculate the range of wavelengths for the frequencies found on the FM band. Take a look at the "whip" radio antennas on cars, comment on the size of the wavelength and the antenna. {2.8 – 3.4 m}
Answer:
2.8m-3.4m
Explanation:
Radio waves are electromagnetic waves and they all travel with a speed of
[tex]3*10^8m/s[/tex] in air.
The range of frequencies in the FM band is from 88MHz to 108MHz.
Generally, the relationship between velocity, frequency and wavelength for electromagnetic waves is given by equation (1);
[tex]v=\lambda f..............(1)[/tex]
From equation (1), we can write,
[tex]\lambda=\frac{v}{f}...............(2)[/tex]
For the upper frequency of 108MHz, the wavelength is given by;
[tex]\lambda_1=\frac{3*10^8}{108*10^6}\\\lambda_1=0.02778*10^2\\\lambda_1=2.78m[/tex]
Similarly, for the lower frequency of 88MHz, the wavelength is given by;
[tex]\lambda_2=\frac{3*10^8}{88*10^6}\\\lambda_2=0.0341*10^2\\\lambda_2=3.41m[/tex]
The range of wavelength therefore is [tex]\lambda_1-\lambda_2=2.8m-3.4m[/tex] approximately.
Please note the following:
[tex]108MHz=108*10^6Hz\\88MHz=88*10^6Hz[/tex]
A 0.453 kg pendulum bob passes through the lowest part of its path at a speed of 2.58 m/s. What is the tension in the pendulum cable at this point if the pendulum is 75.1 cm long? Submit Answer Tries 0/12 When the pendulum reaches its highest point, what angle does the cable make with the vertical? Submit Answer Tries 0/12 What is the tension in the pendulum cable when the pendulum reaches its highest point?
Answer with Explanation:
Mass of pendulum bob, m=0.453 kg
Speed, [tex]v_1=[/tex]2.58 m/s
a.r=75.1 cm=[tex]75.1\times 10^{-2}m[/tex]=0.751 m
[tex] 1cm=10^{-2} m[/tex]
Tension in the pendulum cable is given by
Tension=Centripetal force+force due to gravity
[tex]T=\frac{mv^2}{r}+mg[/tex]
Where [tex]g=9.8 m/s^2[/tex]
Substitute the values
[tex]T=\frac{0.453(2.58)^2}{75.1\times 10^{-2}}+0.453\times 9.8[/tex]
[tex]T=8.45 N[/tex]
b.When the pendulum reaches its highest point,then
Final velocity, [tex]v_2=0[/tex]
According to law of conservation of energy
[tex]mgh_1+\frac{1}{2}mv^2_1=mgh_2+\frac{1}{2}mv^2_2[/tex]
[tex]gh_1+\frac{1}{2}v^2_1=gh_2+\frac{1}{2}v^2_2[/tex]
[tex]h_1=0[/tex]
Substitute the values
[tex]9.8\times 0+\frac{1}{2}(2.58)^2=9.8\times h_2+\frac{1}{2}(0)^2[/tex]
[tex]3.3282=9.8h_2[/tex]
[tex]h_2=\frac{3.3282}{9.8}=0.34 m[/tex]
The angle mad by cable with the vertical=[tex]cos\theta=\frac{0.751-0.34}{0.751}=0.55[/tex]
[tex]\theta=cos^{-1}(0.55)=56.6^{\circ}[/tex]
c.When the pendulum reaches at highest point then
Acceleration, a=0
Therefore, the tension in the pendulum cable
[tex]T=mgcos\theta[/tex]
Substitute the values
[tex]T=0.453\times 9.8cos56.6[/tex]
[tex]T=2.4 N[/tex]
A rectangular coil 20 cm by 33 cm has 110 turns. This coil produces a maximum emf of 72 V when it rotates with an angular speed of 200 rad/s in a magnetic field of strength B.Find the value of B.
Answer:
0.05T
Explanation:
Data given,
area, A=20cm*33cm=0.2m*0.33m=0.066m^2
Number of turns, N=110 turns,
Emf= 72v,
angular speed, W= 200rad/s
magnetic field strength, B= ??
from the expression showing the relationship between induced emf and magnetic field is shown below
[tex]E=NBAW[/tex]
Where N is the number of turns,
E=is the emf,
Bis the magnetic field strength
if we substitute values, we arrive at
[tex]E=NABW\\72=110*0.066*B*200\\B=\frac{72}{1452}\\ B=0.05T[/tex]
Explanation:
Below is an attachment containing the solution.
g A current loop, carrying a current of 5.6 A, is in the shape of a right triangle with sides 30, 40, and 50 cm. The loop is in a uniform magnetic field of magnitude 62 mT whose direction is parallel to the current in the 50 cm side of the loop. Find the magnitude of (a) the magnetic dipole moment of the loop in amperes-square meters and (b) the torque on the loop.
Answer:
(a) 0.336 A m²
(b) 0 Nm
Explanation:
(a) Magnetic dipole moment, μ, is given by
[tex]\mu = IA[/tex]
I is the current in the loop and A is the area of the loop.
The loop is a triangle. To find its area, observe that the dimensions form a Pythagorean triple, making it a right-angled triangle with base and height of 30 cm and 40 cm.
[tex]A = \frac{1}{2}\times(0.3\text{ m})\times(0.4\text{ m})=0.06\text{ m}^2[/tex]
[tex]\mu = (5.6\text{ A})(0.06\text{ m}^2) = 0.336\text{ A}\,\text{m}^2[/tex]
(b) Torque is given by
[tex]\tau = \mu B\sin\theta[/tex]
where B is the magnetic field and [tex]\theta[/tex] is the angle between the loop and the magnetic field. Since the field is parallel, [tex]\theta[/tex] is 0.
[tex]\tau = \mu B\sin0 = 0\text{ Nm}[/tex]
Two stones are launched from the top of a tall building. One stone is thrown in a direction 15.0 ∘∘ above the horizontal with a speed of 20.0 m/sm/s ; the other is thrown in a direction 15.0 ∘∘ below the horizontal with the same speed.
Which stone spends more time in the air? (Neglet air resistance)
a. The stone thrown upward spends more time in the air.
b. The stone thrown downward spends more time in the air.
c. Both stones spend the same amount of time in the air.
Answer:a
Explanation:
Given
First stone is thrown [tex]15^{\circ}[/tex] above the horizontal with some speed let say u
Second stone is thrown at [tex]15^{\circ}[/tex] below the horizontal with speed u
For a height h of building
For first stone (motion in vertical direction)
using
[tex]v^2-u^2=2ah [/tex]
where v=final velocity
u=initial velocity
a=acceleration
h=displacement
[tex]h=u\sin 15(t_1)-\frac{1}{2}gt_1^2---1[/tex]
For second stone
[tex]h=(-u\sin 15)(t_2)-\frac{1}{2}gt_2^2----2[/tex]
Equating 1 and 2
[tex]u\sin 15(t_1+t_2)-\frac{1}{2}g(t_1-t_2)(t_1+t_2)=0[/tex]
[tex](t_1+t_2)[u\sin 15-4.9(t_1-t_2)]=0[/tex]
as [tex]t_1+t_2[/tex] cannot be zero
so [tex]t_1-t_2=1.05\ s[/tex]
[tex]t_1=t_2+1.056[/tex]
therefore time taken by first stone(thrown upward) will be more.
Answer:
a. The stone thrown upward spends more time in the air.
Explanation:
Given:
projection of first stone, [tex]\theta_1=15^{\circ}[/tex] above the horizontal
initial velocity of projectiles, [tex]u_1=u_2=20\ m.s^{-1}[/tex]
projection of second stone,[tex]\theta_2=15^{\circ}[/tex] below the horizontal
The stone thrown upward will spend more time in the air because it travels more distance than the one thrown downwards.
The stone thrown upwards faces deceleration due to the gravity because it goes opposite to the gravity initially, then reaches a velocity zero for a moment and then falls freely from a greater height.
While the second stone posses an initial velocity downward in the direction of the gravity and which further increases its velocity and it travels a short distance.
A 1200 kg car reaches the top of a 100 m high hill at A with a speed vA. What is the value of vA that will allow the car to coast in neutral so as to just reach the top of the 150 m high hill at B with vB = 0? Neglect friction.
Answer:
the value of vA that will allow the car to coast in neutral so as to just reach the top of the 150 m high hill at B with vB = 0 is 31.3 m/s
Explanation:
given information
car's mass, m = 1200 kg
[tex]h_{A}[/tex] = 100 m
[tex]v_{A}[/tex] = [tex]v_{A}[/tex]
[tex]h_{B}[/tex] = 150 m
[tex]v_{B}[/tex] = 0
according to conservative energy
the distance from point A to B, h = 150 m - 100 m = 50 m
the initial speed [tex]v_{A}[/tex]
final speed [tex]v_{B}[/tex] = 0
thus,
[tex]v_{B}[/tex]² = [tex]v_{A}[/tex]² - 2 g h
0 = [tex]v_{A}[/tex]² - 2 g h
[tex]v_{A}[/tex]² = 2 g h
[tex]v_{A}[/tex] = √2 g h
= √2 (9.8) (50)
= 31.3 m/s
What is the magnifying power of an astronomical telescope using a reflecting mirror whose radius of curvature is 5.5 mm and an eyepiece whose focal length is 2.9 cmcm ? Follow the sign conventions.
The magnifying power of an astronomical telescope will be:
"0.095".
Telescope: Focal length and PowerAccording to the question,
Radius of curvature, R = 5.5 mm
Focal length of eyepiece, [tex]F_e[/tex] = 2.9 cm
We know that,
→ Focal length of mirror,
F₀ = [tex]\frac{Radius \ of \ curvature}{2}[/tex]
By substituting the values,
= [tex]\frac{5.5}{2}[/tex]
= 2.75 mm or,
= 0.278 cm
hence,
The telescope's magnification be:
= [tex]\frac{F_0}{F_e}[/tex]
= [tex]\frac{0.275}{2.9}[/tex]
= 0.095
Thus the above approach is correct.
Find out more information about magnification here:
https://brainly.com/question/1477543
Final answer:
The magnifying power of the astronomical telescope using the given values is approximately 0.19.
Explanation:
In order to find the magnifying power of an astronomical telescope, we need to use the formula:
Magnifying Power = Angular Magnification = (focal length of objective) / (focal length of eyepiece)
Given that the radius of curvature of the reflecting mirror is 5.5 mm (which is equal to 0.55 cm) and the focal length of the eyepiece is 2.9 cm, we can substitute these values into the formula to find the magnifying power.
Magnifying Power = (radius of curvature of mirror) / (focal length of eyepiece)
Magnifying Power = 0.55 cm / 2.9 cm
Magnifying Power = 0.19
Therefore, the magnifying power of the astronomical telescope is approximately 0.19.
The 500-kg cylindrical drum is supported by a metal cable (A-B) and a rigid plate (B-C). If the contact between the drum and all surfaces is frictionless and its radius is 500 mm, compute the elongation of the cable (A-B). The elastic modulus of A-B is 200 GPa. A, B, and C are pinned joints. Note that the cross section of Cable A-B is 5 mm2 .
Explanation:
Beloware attachments containing the complete question and solution.
A piston raises a weight, then lowers it again to its original height. If the process the system follows as the piston rises is isothermal, and as it falls is isobaric, then is the work done by the gas positive, negative, or zero? Explain
Answer:
Negative
Explanation:
First law of thermodynamic also known as the law of conservation of energy states that the total energy of an isolated system is constant; energy can be transformed from one form to another, but can be neither created nor destroyed.
The first law relates relates changes in internal energy to heat added to a system and the work done by a system by the conservation of energy.
The first law is mathematically given as ΔU = [tex]U_{F}[/tex] - [tex]U_{0}[/tex] = Q - W
Where Q = Quantity of heat
W = Work done
From the first law The internal energy has the symbol U. Q is positive if heat is added to the system, and negative if heat is removed; W is positive if work is done by the system, and negative if work is done on the system.
Analyzing the pistol when it raises in isothermal and when it falls in isobaric state.The following can be said:
In the Isothermal compression of a gas there is work done on the system to decrease the volume and increase the pressure. For work to be done on the system it is a negative work done then.
In the Isobaric State An isobaric process occurs at constant pressure. Since the pressure is constant, the force exerted is constant and the work done is given as PΔV.If a gas is to expand at a constant pressure, heat should be transferred into the system at a certain rate.Isobaric is a fuction of heat which is Isothermal Provided the pressure is kept constant.
In Isobaric definition above it can be seen that " Heat should be transferred into the system ata certain rate. For heat to be transferred into the system work is deinitely been done on the system thereby favouring the negative work done.
1.!(1)!A!hiker!determines!the!length!of!a!lake!by!listening for!the!echo!of!her!shout!reflected!by!a! cliff!at!the!far!end of!the!lake.!She!hears!the!echo!2.0!s!after!shouting.!Estimate the!length!of!the! lake.
Answer:
The length of the lake is 340 meters.
Explanation:
It is given that, a hiker determines the length of a lake by listening for the echo of her shout reflected by a cliff at the far end of the lake. She hears the echo 2 s after shouting. We need to find the length of the lake.
The distance covered by the person in 2 s is :
[tex]d=vt[/tex]
v is the speed of sound
[tex]d=340\ m/s\times 2\ s[/tex]
[tex]d=680\ m[/tex]
The length of the lake is given by :
[tex]l=\dfrac{d}{2}[/tex]
[tex]l=\dfrac{680\ m}{2}[/tex]
l = 340 meters
So, the length of the lake is 340 meters. Hence, this is the required solution.
Consider a high pressure system with a value of 1045mb and a low pressure system with a value of 997mb. The two pressure systems are 250 km apart. The pressure gra the two pressure systems is: A. 48mb/250km (0.19mb/km) B. 250mb/48km (5.21mb/km) C. 16mb/40km (0.4mb/km) D. Imb/25km (0.04mb/km).
Answer:
GRadient= 0.192 mb / km , the correct answer is a
Explanation:
The pressure gradient would be considered linear so we can use a proportional rule to find the gradient
Gradient = Dp / Dd
Gradient = (1045 -997) / 250
Gradient = 48/250
GRadient= 0.192 mb / km
The correct answer is a
A ball of mass I .5 kg falls vertically downward. Just before striking the floor, its speed is 14 m/s. Just after rebounding upward, its speed is 10 m/s.
If this change of velocity took place in 0.20 seconds, what is the average force of the ball on the floor?
Answer:
180 N
Explanation:
We know that acceleration is the rate of change of speed per unit time hence
[tex]a=\frac {v_f-v_i}{t}[/tex] where v and t are velocity and time respectively, f and i represent final and initial.
Also, from Newton's law of motion, F=ma and replacing a with the above then
[tex]F=m\frac {v_f-v_i}{t}[/tex]
Substituting 1.5 Kg for mass, m -14 m/s for i and 10 m/s for for v then
[tex]F=1.5\times \frac {10--14}{0.2}=180 N[/tex]
Therefore, the force is 180 N
The average force exerted by a 1.5 kg ball on the floor, falling with a speed of 14 m/s and rebounding with a speed of 10 m/s over 0.20 seconds, is 180 N.
Explanation:The subject of this question is Physics and from the concept of impulse and momentum. The change in momentum equals the product of force and the time over which the force is applied. So, we can calculate the force using this formula: Force = Change in momentum / Time.
In this case, the ball's momentum changes by the difference in velocity multiplied by the mass of the ball, which is (14 m/s + 10 m/s) * 1.5 kg. The reason the velocities are added is because the direction of velocity changes, making the speed of ball before and after striking the floor of equal magnitude but opposite in direction. So, the change in momentum becomes 36 kg*m/s. Given that the time is 0.20 seconds, the force would be 36 kg*m/s divided by 0.20 s, or 180 N.
Learn more about Force here:https://brainly.com/question/36258739
#SPJ3
Which of the following statements is/are true? Check all that apply.
1) A person's power output limits the amount of work that he or she can do in a given time span.
2) The SI unit of power is the watt.
3) Power can be considered the rate at which energy is transformed.
4) Power can be considered the rate at which work is done.
5) A person's power output limits the total amount of work that he or she can do.
6) The SI unit of power is the horsepower.
Answer:
The statements which are true are:
1) A person's power output limits the amount of work that he or she can do in a given time span.
2) The SI unit of power is the watt.
4) Power can be considered the rate at which work is done.
Explanation:
Power can be defined as the the rate at which the work is done. Mathematically,
[tex]\large{P = \dfrac{W}{t}}[/tex]
where '[tex]W[/tex]' is the amount of work done in time '[tex]t[/tex]'.
Also one can perform some work in the expense of the energy that he/she consumes. So alternatively power can also be defined as the rate at which the energy is expended.
The SI unit of work done is Joule. So the unit of power in SI system is
[tex]Js^{-1}[/tex] or Watt.
Fluid originally flows through atube at a rate of 200 cm3/s. Toillustrate the sensitivity of the Poiseuille flow rate to variousfactors, calculate the new flowrate for the following changes with all other factors remaining the same as in the original conditions: A new fluid with 6.00 times greater viscosity is substituted. Poiseuille flow is given by:
Answer:
[tex]Q_{2}=1200cm^{3}/s[/tex]
Explanation:
Given data
Q₁=200cm³/s
We know that:
[tex]F=n\frac{vA}{l}\\[/tex]
can be written as:
ΔP=F/A=n×v/L
And
Q=ΔP/R
As
n₂=6.0n₁
So
Q=ΔP/R
[tex]Q=\frac{nv}{lR}\\ \frac{Q_{2}}{n_{2}}= \frac{Q_{1}}{n_{1}}\\ Q_{2}=\frac{Q_{1}}{n_{1}}*(n_{2})\\Q_{2}=\frac{200}{n_{1}}*6.0n_{1}\\ Q_{2}=1200cm^{3}/s[/tex]
A polarized Light of intensity I0 is incident on an analyzer. What should the angle between the axis of polarization of the light and the transmission axis of the analyzer be to allow 44% of the total intensity to be transmitted?
Answer:
You could use Malus's Law. Malus's Law tells us that if you have a polarized wave (of intensity I 0 0 ) passing through a polarizer the emerging intensity ( Y OR ) will be proportional to the square cosine of the angle between the polarization direction of the incoming wave and the axis of the polarizer.
Explanation:
OR: I = I 00 ⋅ cos two ( e )
Using the first definition of coefficient of elasticity given in the lab (based on velocity), if a ball strikes a surface with a speed of 10 m/s and rebounds just after the collsion with a speed of 3 m/s, what is the coefficient of elasticity
Final answer:
The coefficient of elasticity is a measure of the elasticity of a collision, defined as the ratio of speeds after and before the collision. In this case, the coefficient of elasticity is 0.3.
Explanation:
The coefficient of elasticity, also known as the coefficient of restitution (c), is a measure of the elasticity of a collision between a ball and an object. It is defined as the ratio of the speeds after and before the collision.
In this case, the ball strikes a surface with a speed of 10 m/s and rebounds with a speed of 3 m/s. To find the coefficient of elasticity, we can use the formula c = (v_final / v_initial), where v_final is the final velocity and v_initial is the initial velocity.
Therefore, the coefficient of elasticity in this case would be c = (3 m/s / 10 m/s) = 0.3.
Delicate measurements indicate that the Earth has an electric field surrounding it, similar to that around a positively charged sphere. Its magnitude at the surface of the Earth is about 100 N/C. What charge would an oil drop of mass 2.0 x 10 15 kg have to have, in order to remain suspended by the Earth’s electric field? Give your answer in Coulombs ?
Answer:
q = 1.96 10⁴ C
Explanation:
The elective force is given by
[tex]F_{e}[/tex] = q E
Where E is the electric field and q the charge.
Let's use Newton's law of equilibrium for the case of the suspended drop
F_{e} –W = 0
F_{e} = W
q E = m g
q = m g / E
Let's calculate
q = 2.0 10⁵ 9.8 / 100
q = 1.96 10⁴ C
To maintain suspension in the Earth’s electric field, an oil drop with a mass of 2.0 × 10^-15 kg requires a charge of 1.96 × 10^-16 Coulombs, calculated by equating the electric force with the gravitational force.
Explanation:To determine the charge needed for an oil drop of mass 2.0 × 10-15 kg to remain suspended by the Earth’s electric field of 100 N/C, we can apply the equilibrium condition between the electric force and the gravitational force. The electric force (Felectric) is equal to the charge (q) multiplied by the electric field (E), so Felectric = q × E. The gravitational force (Fgravity) is the mass (m) multiplied by the acceleration due to gravity (g), which is approximately 9.8 m/s2.
For the oil drop to remain suspended, these two forces must be equal: q × E = m × g, which gives us q = (m × g) / E. Using the provided values, the charge q is calculated as follows:
q = (2.0 × 10-15 kg × 9.8 m/s2) / 100 N/C
q = (2.0 × 10-15 × 9.8) / 100
q = 1.96 × 10-16 C
Therefore, the oil drop must have a charge of 1.96 × 10-16 Coulombs to remain suspended in the Earth’s electric field.