Answer:
2.84 m/s
Explanation:
At the top position of the circular trajectory, the normal reaction is zero:
N = 0
So it means that the only force that is providing the centripetal force is the gravitational force (the weight of the bucket). Therefore we have:
[tex]mg = m \frac{v^2}{r}[/tex]
where
m is the mass of the water bucket
g = 9.8 m/s^2 is the acceleration of gravity
v is the speed of the bucket
r = 0.824 m is the radius of the circle
Solving for v,
[tex]v=\sqrt{gr}=\sqrt{(9.8 m/s^2)(0.824 m)}=2.84 m/s[/tex]
6. Shyam's motorcycle accelerated from 2m.s
to 10m/s in 10s. Find the distance the
motorcycle travels.
a) 120m
b) 5m
c) 60m
d) 24m
Answer:
The answer is c).
Explanation:
[tex]v_0 = 2 \frac{m}{s} \\ v_1 = 10 \frac{m}{s} \\ t = 10s \\ \\ s = unknown \\ \\ a = \frac{v_1 - v_0}{t} \\ a = \frac{10 \frac{m}{s} - 2 \frac{m}{s} }{10s} = 0.8 \frac{m}{ {s}^{2} } \\ \\ s = v_0t + \frac{a {t}^{2} }{2} \\ s = 2 \frac{m}{s} \times 10s + \frac{0.8 \frac{m}{ {s}^{2} } \times {(10s)}^{2} }{2} = 60m[/tex]
Cereal plants gain chemical potential energy as they grow. Which form of energy is converted to create the chemical potential energy?
The plant absorbs the sunlight which serves as source of energy for the plant. Therefore, the form of energy which gets converted to “chemical potential energy is the solar energy”.
Explanation:
In process of photosynthesis, the plant makes the food and release oxygen, this occurs only in presence of solar energy that is sunlight. Therefore, the source of energy for the plants are sunlight which provides solar energy which is used up in energy conversion through various process.
The end product of the energy resource is the conversion to chemical potential energy gained over the growth of the cereal plants.
the coefficient of kinetic friction between a couch and the floor is 0.81. if the couch has a mass of 71 kg and you push it with a force of 650 n, what is the net force on the couch as it slides?
a: 696 n
b:86 n
c: 46 n
d:331 n
Answer:
B: 86 N
Explanation:
There are four forces acting on the couch. Weight pulling down, normal force pushing up, your applied force to the right, and friction opposing you to the left.
In the y-direction:
∑F = ma
N - W = 0
N = W = mg
In the x-direction:
Fnet = P - Fᵣ
Fnet = P - Nμ
Fnet = P - mgμ
Given P = 650 N, m = 71 kg, g = 9.8 m/s², and μ = 0.81:
Fnet = 650 - (71)(9.81)(0.81)
Fnet = 86 N
A(n)
such as oxygen or carbon, is a pure substance.
Answer:it is a pure substance
Explanation:
All elements are pure substances because they are made up of only one type of atom
Answer: An element is the answer you’re looking for!
A good hypothesis must be which of the following
Answer:
Testable
Explanation:
A good hypothesis must always be testable.
Answer:
Must be testable and falsifiable
Acceleration involves a change in speed or what?
Answer:
Velocity would be your answer.
u will get POINTS......
answer it fast... someone...
brainliest will be awarded for sure....
→calculate the pressure exerted by a body having a mass of 30kg over an area of contact 400cm2.
also explain it clearly... for every step there should be explanation...
Explanation:
mass of the body=30kg
area on which it is exerting pressure=400 cm2 to m2
=4m2
pressure it exerts=?
the formula for finding pressur in physics is F/A where the mass of the body is the force implied while area is taken as area
therefore:pressure=F/A
=30/4
=7.5 kgm/s2
=
Answer:
7500 N/m²
Explanation:
The formula for finding pressure = force/area
force = 30 kg we convert this to newtons.this is because pressure is in N/m²
30 x 10 = 300N
Area = 400cm² we convert to m² = 400/10000 = 0.04
pressure = force/ area
pressure = 300/0.04 = 7500 N/m²
If you need any more explanation pls do mention in the comment section so that i can help more.
Hope this helps and if it does mark as branliest answer thx
Entropy can only be decreased in a system if
Final answer:
Entropy can only be decreased in a system if energy transfer occurs. When energy is transferred into a system, it can decrease the entropy of that system.
Explanation:
Entropy can only be decreased in a system if energy transfer occurs. When energy is transferred into a system, it can decrease the entropy of that system. For example, if you gather marbles scattered around a room and put them into a cup, you are decreasing the entropy of that system through your work. Similarly, energy from the Sun can decrease the entropy of local systems on Earth. However, it is important to note that the overall entropy of the rest of the universe increases, to satisfy the second law of thermodynamics.
Which of the following describes an electric motor?
Check all that apply.
A.) Changes electric energy to mechanical energy.
B.) Can be powered by a hand crank.
C.) Uses the interaction between a spinning coil of wire and magnet.
D.) Is found in many appliances with moving parts, like a vacuum cleaner or a blender.
An electric motor changes electrical energy into mechanical energy, often found in household appliances like vacuum cleaners or blenders. They use the interaction between a spinning coil of wire and a magnet.
Explanation:An electric motor is a device that transforms electrical energy into mechanical energy. This is accomplished through the interaction between a spinning coil of wire and a magnet, a mechanism called electromagnetic induction. Many common appliances with moving parts, such as vacuum cleaners or blenders, contain electric motors in their design to facilitate desired functionalities, such as rotation or movement.
Option B, which suggests an electric motor can be powered by a hand crank, is incorrect. This describes a manual or mechanical system, not an electric motor.
Learn more about Electric Motor here:https://brainly.com/question/30033576
#SPJ3
Electric motors convert electrical energy into mechanical energy through magnetic interactions.
Electric motors are devices that convert electrical energy into mechanical energy. They operate based on the interaction of magnetic fields and current-carrying conductors, generating force to produce motion. Electric motors are commonly found in various applications like industrial fans, household appliances, power tools, and more.
12. A body is a particular amount of matter. It can be a solid, liquid or gas. It can be described as existing in
A. size and shape.
B. motion and force
C. time and space.
D. location and movement.
Answer:
A body is a particular amount of matter. It can be a solid, liquid or gas. It can be described as existing in time and space.
Explanation:
Answer:
c. Time and space.
Explanation:
A body is a particular amount of matter. it can be solid,liquid or gas. It can be described as existing in Time and space.
Read about Pendulums. Then complete the sentences based on the diagram of the pendulum. Be sure to keep this
article open because there will be several questions related to it.
The pendulum has the most potential energy
The pendulum has the least kinetic energy
The pendulum has the most kinetic energy at the top of swing
The pendulum has the least potential energy
Answer:
1. at the top of swing 2. at the top of swing 3. at the bottom of swing 4.at the bottom of swing
Explanation:
Answer:
The pendulum has the most potential energy at the top of swing.
The pendulum has the least kinetic energy at the top of swing.
The pendulum has the most kinetic energy at the bottom of swing.
The pendulum has the least potential energy at the bottom of swing.
The wind pushes a cup along the sand at the beach. The force of the wind was 17.8N, and the opposing force was 2N. If the cup accelerates at 7m/s^2, how much does the cup weigh?
Explanation:
Let's begin with the cup's free body diagram (figure attached), there we are able to see the forces acting on this object:
On the X axis:
[tex]F_{x}=F_{1}+F_{2}[/tex] (1)
Where:
[tex]F_{1}=17.8N[/tex] is the force of the wind
[tex]F_{2}=-2N[/tex] is the opposing force (that is why it has the negative sign)
So:
[tex]F_{x}=17.8N-2N=15.8N[/tex] (2)
In addition we know by Newton's 2nd law:
[tex]F_{x}=m.a[/tex] (3)
Where:
[tex]m[/tex] is the mass of the cup
[tex]a=7m/s^{2}[/tex] is its acceleration
Substituting (2) in (3):
[tex]15.8N=m(7m/s^{2})[/tex] (4)
Finding [tex]m[/tex]:
[tex]m=\frac{15.8N}{7m/s^{2}}=2.25kg[/tex] (5)
On the other hand we have the forces acting on the Y axis:
[tex]F_{y}=N-W=0[/tex] (6)
Where:
[tex]N[/tex] is the normal force
[tex]W=m.g[/tex] is the weight of the cup, being [tex]g=9.8m/s^{2}[/tex] the acceleration due gravity
This means:
[tex]N=W=m.g[/tex] (7)
Substituting (5) in (7):
[tex]W=(2.25kg)(9.8m/s^{2})[/tex] (8)
Finally:
[tex]W=22.05N[/tex] This is the weight of the cup
Which of the following is one way that technology can improve procut
?
Answer:
Answer: C. Machines replace workers and eliminate human effort from the production process.
This is sad but true. By replacing the human workers, product cost and productivity increases as the machines now a days can perform tasks both faster and more accurately than humans. The productivity will rise also because of the lessening of human error when it comes to production lines.
Explanation:
Please mark brainliest and have a great day!
The correct option is: C. Machines replace workers and eliminate human effort from the production process.
Option C suggests that technology can improve productivity by replacing human effort with machines, specifically through automation. This process can lead to increased efficiency, reduced production time, and cost-effectiveness. Machines can handle repetitive tasks at a faster rate and with precision, potentially enhancing overall output. However, it's important to note that this can also result in job displacement for certain roles. While automation can streamline processes and reduce manual labor, its implementation requires careful consideration of its societal and economic implications. Therefore, the effectiveness of technology in improving productivity depends on how it is integrated and managed within the broader context of the workforce and industry.
Complete Question:
Which of the following is one way that technology can improve productivity?
A. Powerful machines are less dangerous to industrial workers.
B. Better methods of production allow workers to earn higher wages.
C. Machines replace workers and eliminate human effort from the production process.
D. The assembly line enables more workers to participate in the production process.
Acid rain is a secondary pollutant.
T or F
Answer: True
Explanation:
edgen 2022
Which statement correctly describes the current in a circuit that is made up of any two resistors connected in parallel with a battery?
A. the current in the battery and in each resistor is the same
B. The current the battery equals to the sum of the currents in the resistors
c.The current in the battery is less than the current in either resistor
d. The current in the battery equals to the product of the currents in the resistors
B. The current the battery equals to the sum of the currents in the resistors describes the current in a circuit that is made up of any two resistors connected in parallel with a battery
What is a parallel combination ?
When two or more resistances are connected between the same two points, they are said to be connected in parallel combination
Resistors are connected in parallel combination , and its been known that if resistors are connected in parallel combination than current gets divided in each branch according to the value of resistance attached in that branch and voltage remains same across each resistance .
Also total current in the circuit or current in the battery is equal to the algebraic sum of current in each branch of the circuit
correct answer will be B. The current the battery equals to the sum of the currents in the resistors
learn more about parallel combination:
https://brainly.com/question/15048645?referrer=searchResults
#SPJ2
Both mechanical and electromagnetic waves _____. have compressions and rarefactions oscillate in the same direction as the wave motion transmit energy require a medium for transfer
Answer:
transmit energy
Explanation:
Waves (both mechanical and electromagnetic) are periodic perturbations of the space that transmit energy without transmitting matter. (so, "transmit energy" is valid for both types of waves).
The other statements are wrong because:
have compressions and rarefactions --> this is a property only of longitudinal waves, while electromagnetic waves are transverse, so they do not have compressions
oscillate in the same direction as the wave motion --> this is the description of longitudinal waves, while electromagnetic waves are transverse,
require a medium for transfer --> this is true only for mechanical waves: electromagnetic waves in fact do not need a medium to propagate.
Answer:
Both mechanical and electromagnetic waves transmit energy .
I hope this really helps!!!
When you enter a pool of water, you feel as though you weigh less. What
causes this apparent change of weight?
A. Buoyant force
B. Cohesive force
C. Adhesive force
D. Pressure
Answer:
Buoyant force.
Explanation:
When we are immersed in a pool of water, we experiences a force pushing us in upward direction due to which our weight is decreased and this force is called Buoyant force.
This is also called upthrust.
Answer: Buoyant force
Explanation:
VEICUL HC CICLE MICI.
Why is it important to warm up your muscles before a workout?
Answer:
You could become injured.
Explanation:
It is important to warm up your muscles before a workout because if you didn't you could pull a muscle or become seriously injured.
Answer:
To decrease your chance of injury
Explanation:
Ella uses a camera as a model of the eye. The film in the camera serves the same role as which part of the eye?
lens
pupil
sclera
retina
Answer is :
retina- last choice
The film in a camera serves the same role as the d) retina in the eye.
Both the film and the retina are responsible for capturing images. In a camera, light enters through the lens, passes through the aperture (similar to the pupil), and is focused onto the film, where the image is recorded. Similarly, in the human eye, light passes through the cornea and lens, is focused by the lens, and hits the retina at the back of the eye.
The retina contains photoreceptor cells that convert the light into electrical signals, which are then sent to the brain for processing, forming the image we see. Therefore, the film in the camera acts as the light-sensitive part that captures and stores the image, just like the retina functions as the light-sensitive layer that detects and processes visual information in the eye.
CuSO4 is__
an acid
a base
a salt
Answer:
Salt
Explanation:
An acid is a compound that has H as its metal as HCl
A base is a compound that has OH as its nonmetal as in KOH.
A salt has neither, and that's what this is (CuSO4)
26. A 40 kg boy jumps from a height of 4m onto a plate-form mounted on springs. As the
spring compress, the plate-form is pushed down a maximum distance of 0.2 cm below its
initial position, and it then rebounds. What is the loss in potential energy by the boy?
a. 800J
b. 1080J
c. 1600J
d. 1680 J
Answer:
c. 1600J
Explanation:
The loss in potential energy of the boy is given by:
[tex]U=mg \Delta h[/tex]
where
m = 40 kg is the mass of the boy
g = 9.8 m/s^2 is the acceleration of gravity
[tex]\Delta h = 4 m + 0.02 m = 4.02 m[/tex] is the total change in the height of the boy (4 metres + 2 cm due to the compression of the spring)
Substituting, we find
[tex]\Delta U = (40 kg)(9.8 m/s^2)(4.02 m) = 1577 J \sim 1600 J[/tex]
what is the efficiency of an engine that does 80 j of work and exhausts 320 j of heat while taking in 400 j of heat ?
a. 10%
b. 20%
c. 80%
d. 25%
Answer:
b. 20%
Explanation:
Efficiency of an engine is a ratio in percentage of the work done to the energy intake of the engine.
η=(Q₁-Q₂)/Q₁×100%
η is efficiency, Q₁ is the energy intake, Q₂ is energy wasted.
The information provided is:
Energy intake = 400 J
Work done = 80 J = (400-320) =Q₁-Q₂
Energy wasted =320 J
η= 80/400×100%
=20%
Answer:
B.20 %
Explanation:
The voltage in a lightbulb is given by the equation V= IR. In this equation, Vis
the voltage, lis the current, and Ris the resistance. What is the current in a
lightbulb with a voltage of 35.0 V and a resistance of 175 n?
O A. 6125 A
O B. 1.40 A
O C. 0.200 A
O D. 5.00 a
V=IR
35=I(175)
*Divide both sides by 175*
0.2=I
C. 0.200 A
Hope this helps!!
The current in a lightbulb with a voltage of 35.0 V and a resistance of 175 ohm is 0.2 A.
Find the current in a lightbulb?Given:
The voltage in a lightbulb is given by the equation V=IR V is the voltage, I is current, and R is the resistance.The voltage of the lightbulb is given as 35.0 V.The resistance of the lightbulb is given as 175 Ohm.As the equation is given,
V= IR
where I is current, R is resistance and V is the voltage.
Now, I = V/R
As the value of Voltage and resistance of the lightbulb is given, we will put in the above equation, we get;
I = 35.0/ 175 A
I = 0.2 A.
Hence, the current of the lightbulb is 0.2 A.
Therefore, Option C is the correct answer.
To learn more about Current, refer to:
https://brainly.com/question/13562393
#SPJ2
I dont get how to do the electron cloud model, can someone please tell me how in simple words. I have been lost and dont know anything on how to do the electron cloud model.
Answer:
whats the question
Explanation:
25 points, plus brainiest if answer is correct. Please i don't have much time.
Electromagnetic waves who's photons carry the highest energy also have the:
A.) shortest wavelengths
B.) strongest positive charges
C.) lowest frequency
D.) highest amplitude
which air mass would produce warm,humid weather in the summer?
Answer:
Maritime tropical
Explanation:
The maritime tropical air mass typically produce warm, humid weather in the summer.
Answer:
The correct answer is the maritime tropical air masses.
Explanation:
These air masses are loaded with moisture with the water on which they are produced and heated as well. These air masses are form over the ocean in the hot areas of the Gulf of Mexico and the tropics.
Later they move towards the north, which brings an increase of humidity and hot winds to the United States. This phenomenon generates an increase in the probability of rains and generally occurs in the summer season in the southern states of the country. But nevertheless they can be formed throughout the year.
answer please 98 points also brainliest
the answer is D) The air in the aquarium is saturated
none of the other answers were realistic AND I took this before so I know the right answer.
Answer:
d.
Explanation:
Look at it this way, when a sponge is saturated it cannot take in any more water. When air (a mixture of gasses) is saturated it cannot take in any more water vapour and water vapour will condense out as liquid water. This is termed the saturation point.
Air is classed usually as a percentage of saturation, dry air being 0% and saturated 100%
However, unlike the sponge ananalogy, 1kg of air will have a different capacity for water vapour depending on its temperature (and pressure). Charts (Psycrometric Charts) are available that allow the degree of saturation to be calculated, usually by determining the dew point (temperature at which 100% saturation occurs) by using a wet bulb thermometer and comparing it with the normal dry bulb temperature.
World class speed skaters can skate a 3,000-m course in about 4 minutes.
What is their average speed for this course?
A. 12.5 m/s
B. 1.33 m/s
C. 1.25 m/s
D. 13.3 m/s
Answer:
a
Explanation:
3000 m / 4 minutes = 720 ave speed per minute
720 / 60 seconds = 12.5 m/s
20pts.
The edge of a flying disc with a radius of 0.13 m spins with a tangential speed of 33 m/s
The centripetal acceleration of the edge of the disc is?
Answer:
84 m/s2.
Explanation:
A. 0.0051
B. 0.43
C. 25
D. 84
Answer:
84 m/s^2
Explanation:
when a book falls from a shelf to the ground without anyone pushing on it, no work is done on the book. true or false
Answer:
False
Explanation:
Gravity and impact puts a toll on it.