Write a function called cipher(phrase,shift)that accepts two parameters: a string phrase and an integer shift.The integer shift can be positive, negative or zero.
Answers
Answer:
Following is given the code according to requirement.
The code is attached as an image so that the indentation is understood by the user. Comments are given inside the code where necessary.
The output of code is also attached as well in end.
I hope it will help you!
Explanation:
Related Questions
_____ verifies that an individual demonstrated a certain level of knowledge and skill on a standardized test.
Answers
Answer:
Certification
Explanation:
Certification verifies that a person has appropriate experience and skills to carry out their task or job.
This is achieved through some test or examination, through some professional training or by gaining some work experience.
This provides with the credentials required to perform their jobs efficiently with proficient skills that can be trusted by companies and customers.
For example having an IT certification means having necessary skills to perform IT related tasks. IT field is a vast field which keeps evolving with time so being an IT certified refers to having updated knowledge about dynamic computer and information technologies.
The Internet has made going global easier than it has ever been, but the promise of "borderless commerce" remains restrained because of the a. cultural variations of the people visiting a website. b. old brick-and-mortar rules, regulations, and habits. c. system of floating exchange rates. d. demographic makeup of various people accessing a website.
Answers
Answer:
The correct option is B: Old brick-and-mortar rules, regulations, and habits
Explanation:
Globalization has been made possible because of the internet. However, the promise of what is considered "borderless commerce" is limited due to the old brick and mortar rules, regulations, and habits. Brick and mortar is considered the traditional businesses offering products and services to customer in a rented or owned store and requires face-to-face business. Hence globalization via the internet is limited because companies have to sort out their building and stores, follow every law and regulation to opening offices and other habits practiced by these brick-and-mortar businesses.
Write code that prints: Ready! firstNumber ... 2 1 Run! Your code should contain a for loop. Print a newline after each number and after each line of text Ex: firstNumber = 3 outputs:
Answers
Final answer:
The task requires a Python code using a for loop to count down from a specified starting number, printing 'Ready!', each number on a new line, and 'Run!' at the end.
Explanation:
To write code that counts down from a given number and prints 'Ready!', followed by each number, and ending with 'Run!', we can use a for loop. Here is a sample Python code snippet that accomplishes this:
firstNumber = 3
print('Ready!')
for num in range(firstNumber, 0, -1):
print(num)
print('\n')
print('Run!')
This code starts by printing 'Ready!', then it enters a for loop that counts down from firstNumber to 1, printing each number followed by a newline. Finally, it prints 'Run!' after exiting the loop. Remember to replace firstNumber with the actual starting number you wish to count down from.
How long would it take to transfer a 600-MB database from disk to memory over a DMA channel with a bandwidth of 2.5 GB/s?
Answers
Answer:
0.24 seg
Explanation:
We have 600 MB of data if we convert it to Gb we get 0.6Gb of data, the bandwidth is telling us that we can transfer 2.5 Gb of data per second if we assume that the data transfer is lineal we can apply the rule of three to solve the problem:
2.5 Gb -> 1 seg
0.6 Gb -> X
Applying the cross multiplication we get that X = 0.6 Gb* 1 seg / 2.5 Gb = 0.24 seg
The time required to transfer a 600-MB database over a DMA channel with a bandwidth of 2.5 GB/s is 0.24 seconds.
Explanation:To calculate the transfer speed of a 600-MB database over a DMA channel with a bandwidth of 2.5 GB/s, you first need to convert the database size to the same unit as the bandwidth. In this case, 600 MB = 0.6 GB.
The time to transfer data over a channel is equivalent to the size of the data (in GB) divided by the bandwidth (in GB/s). Therefore, the time to transfer the 600-MB database would be 0.6 GB / 2.5 GB/s = 0.24 seconds.
Learn more about Data Transfer here:
https://brainly.com/question/35863200
#SPJ3
In this exercise we examine in detail how an instruction is executed in a single-cycle datapath. Problems in this exercise refer to a clock cycle in which the processor fetches the following instruction word:
10101100100001010000000000010100
Assume that the data memory is all zeros and that the processor’s registers have the following values at the beginning of the cycle in which the above instruction word is fetched:
R0 R1 R2 R3 R4 R5 R6 R8 R12 R31
0 1 -2 3 -4 5 -6 -8 -12 31
a, What are the outputs of the sign-extend and the jump "Shift-Left-2" (near the top of Figure 4.24) for this instruction word?
b, What are the values of ALU control unit’s inputs (ALUOp and Instruction operation) for this instruction?
c, What is the new PC address after this instruction is executed? Highlight the path through which this value is determined.
d, For the ALU and the two add units, what are their data input values?
e, What are the values of all inputs for the "Registers" unit?
Answers
Following are the responses to the given question:
Given instruction:
[tex]10101100100001010000000000010100[/tex]
For point A)
Sign extend and leap "shift left 2": The sign extend can be determined by taking the LSB 16 bits and expanding it to 32 bits.
Sign Extend
[tex]00000000000000000000000000010100[/tex]
A jump command "shift left 2" can be discovered by extracting the LSB 26 bit and shifting left by 2 bits.
Jump Shift Left 2
[tex]0010000101000000000001010000[/tex]
For point B)
ALU control units' inputs are as follows:
Its ALUop has two LSBs.
[tex]ALUop\\\\00[/tex]
The instructions are a 6 bit LSB instruction.
Instruction
[tex]010100[/tex]
For point C)
New PC address:
[tex]New PC Address \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ Path \\\\ PC+4 \ \ \ \ \ \ \ \ PC \to Add (PC +4) \to Branch MUX \to Jump MUX \to PC[/tex]
For point D)
Input values:
[tex]ALU \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ Add (PC+4) \ \ \ \ \ \ \ \ \ \ \ Add (Branch)[/tex]
[tex]In put \#1 \ \ \ In put \# 2 \ \ \ \ In put \# 1 \ \ \ In put \# 2 \ \ \ \ In put \# 1 \ \ \ In put \# 2\\\\[/tex]
[tex]-4 \ \ \ \ 20 \ \ \ \ \ \ PC \ \ \ \ 4 \ \ \ \ \ \ PC+4 \ \ \ \ 20*4[/tex]
For point E)
Calculating the inputs into the "Registers" units:
[tex]\text{Bits\ 25-21 specify the Read Reg#1} \\\\\text{Bits\ 20-16 specify the Read Reg#2}[/tex]
[tex]Read \ \ \ \ \ \ Read \\\\Reg\#1 \ \ \ \ \ \ Reg\#2 \ \ \ \ \ \ WriteReg \ \ \ \ \ \ WriteData\ \ \ \ \ \ RegWrite[/tex]
[tex]4 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 5 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ X \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ X \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ 0[/tex]
Learn more:
brainly.com/question/25222612
What is the largest numeric value that could be represented with three bytes if each digit were encoded using one ASCII pattern per byte? What if binary notation were used?
Answers
The largest numeric value that can be represented in 3 bytes is 224
Explanation:
commonly, to represent a 999 number, 10 bits are used.But with 3 bytes, it can save or store integer with the range from 0 to 224-1 in the 24 bits. (3 * 8 bits =24 bits).Then the binary notation is used for encoded numeric data in order to store in the computer storage device.Final answer:
The largest value with three bytes using ASCII is 127127127, but for practical numerical storage in binary notation, the largest value with three bytes is 16777215, represented as 11111111 11111111 11111111 in binary.
Explanation:
The largest numeric value that could be represented with three bytes using one ASCII pattern per byte depends on the ASCII printable characters range. ASCII characters are represented within the range of 0 to 127, therefore in three bytes, the largest decimal values you could represent would be 127127127. However, this is not typically how numeric values are stored.
When using binary notation, each byte consists of 8 bits, and the maximum value for each bit is 1. Therefore, the largest value in a single byte is 11111111, which is 255 in decimal. Hence, in three bytes, the largest decimal number that can be stored is 16777215 (which is 11111111 11111111 11111111 in binary).
Cipher Block Chaining (CBC) is similar to Electronic Code Book (ECB) but it uses an initialization vector (IV) to add security. True False
Answers
Answer:
The correct answer to the following question will be "True".
Explanation:
The most common heritage authentication mode is the CBC (Common legacy encryption) mode. Implementation around an internal ECB style cipher is simple and easy to understand and marginal.An initial value (IV) must be selected at random, even for the CBC function, but this doesn't have to be hidden.Therefore, the given statement is true.
Web crawlers or spiders collect information from Web pages in an automated or semi-automated way. Only the text of Web pages is collected by crawlers. True False
Answers
Answer:
The correct answer to the following question will be "False".
Explanation:
Web crawlers make copies of google search recovery pages that index the streamed pages to allow subscribers to more effectively search. It collects details of Web pages in an automatically generated or semi-automated form.The code of HTML and Hyperlink can be checked by crawlers. They could be used for scraping of the web.Therefore, the given statement is false.
You will be given a string, containing both uppercase and lowercase alphabets(numbers are not allowed).
You have to print all permutations of string with the added constraint that you can’t change the uppercase alphabets positions.
Example: (puNeeTgUlia)
Answers
Answer:
The Java code is given below with appropriate comments
Explanation:
import java.util.*;
class Main {
static Set<String> set = new HashSet();
static void printPerms(char ch[], int ind){
//If end of string is reached, add it to set
if(ind==ch.length){
set.add(new String(ch));
return;
}
for(int i=ind;i<ch.length;i++){
//Only swap if lower case
if((ch[i]>='a' && ch[i]<='z')&&((ch[ind]>='a' && ch[ind]<='z'))){
char t = ch[i];
ch[i] = ch[ind];
ch[ind] = t;
}
printPerms(ch,ind+1);
if((ch[i]>='a' && ch[i]<='z')&&((ch[ind]>='a' && ch[ind]<='z'))){
char t = ch[i];
ch[i] = ch[ind];
ch[ind] = t;
}
}
}
public static void main(String[] args) {
printPerms("aBbCc".toCharArray(),0);
System.out.println(set);
}
}
Final answer:
The question involves creating an algorithm to generate permutations of a given string without altering the positions of uppercase alphabets, a problem suitable for Computers and Technology at the college level.
Explanation:
The task requires generating all permutations of a given string while maintaining the original positions of the uppercase alphabets. This is typically a problem that can be approached algorithmically, falling under the category of Computers and Technology. To solve it, you would need to find permutations of the lowercase letters only and then insert them back into the string at the positions not occupied by uppercase letters.
One way to achieve this is to extract all lowercase letters and use a permutation algorithm, such as Heap's algorithm, to generate all permutations while the uppercase letters act as anchors, holding their respective positions fixed. As each permutation of the lowercase letters is generated, it's interlaced with the uppercase ones to construct a full-string permutation that meets the condition. This process is repeated until all permutations of the lowercase characters are exhausted.
Write a program that dynamically allocates an array large enough to hold a user-defined number of test scores. Once all the scores are entered, the array should be passed to a function that sorts them in ascending order. Another function should be called that calculates the average score. The program should display the sorted list of scores and averages with appropriate headings. Use pointer notation rather than array notation whenever possible. Input Validation: Do not accept negative numbers for test scores.
Answers
Answer:
C++ Program
Explanation:
#include <iostream>
#include <iomanip>
using namespace std;
void arrSelectSort(double *, int);
void showArrPtr(double *, int);
void showAverage(double, int);
int main()
{
//dynamically allocate an array
//acumulator
//averge scores
//number of test scores
double *scores,
total = 0.0;
//average;
int nScores;
//Get how many test scores the users wants to enter.
cout << "How many test scores would you like to process?";
cin >> nScores;
//condition about the scores
scores = new double[nScores];
if (scores == NULL)
return 0;
//Get the number of each test
cout << "Enter the test scores below.\n";
for (int count = 0; count < nScores; count++)
{
cout << "Test score #" << (count + 1) << ": ";
cin >> *(scores + count);
}
//total score operation
for (int count = 0; count < nScores; count++)
{
total += *(scores + count);
}
showAverage(total, nScores);
//the array pointers
arrSelectSort(scores, nScores);
cout << "the ascending order is: \n";
showArrPtr(scores, nScores);
//free memory.
delete[] scores;
scores = 0;
return 0;
}
// bubble sort
void arrSelectSort(double *array, int size)
{
int temp;
bool swap;
do
{
swap = false;
for (int count = 0; count < (size - 1); count++)
{
if (*(array + count) > *(array + count + 1))
{
temp = *(array + count);
*(array + count) = *(array + count + 1);
*(array + count + 1) = temp;
swap = true;
}
}
} while (swap);
}
// sort function
void showArrPtr(double *array, int size)
{
for (int count = 0; count< size; count++)
cout << *(array + count) << " ";
cout << endl;
}
// average function
void showAverage(double total, int nScores)
{
double average;
//average operation
average = total / nScores;
//Display the results.
cout << fixed << showpoint << setprecision(2);
cout << "Average Score: " << average << endl;
}
In this recitation assignment, will write a complete C program that accepts as input any two integers from the user and swaps both integers using bitwise operators only without a third variable. E
Answers
Answer:
#include<iostream>
using namespace std;
int main()
{int num1,num2;
cout<<"enter 2 numbers:"<<endl;
cinn>>num1;
cinn>>num2;
cout<<("value without swapping of num1",num1);
cout<<("value without swapping of num2",num2);
num1 ^= num2;
num2 ^= num1;
num1 ^= num2;
cout<<("num1 after swapping",num1);
cout<<("num2 after swapping,num2);
return 0;
}
Create an E-R Diagram for the following:An art museum owns a large volume of artworks. Each artwork is described by an item Id (identifier), title, type, and size; size is further composed of height, width, and weight. A work of art is developed by an artist, but the artist for some works is unknown. An artist is described by an artist ID (identifier), name, date of birth, and date of death (which is null for still living artists). Notice that the name of the artist is a composite attribute, composed of first, last and preferred names and it cannot be empty. The artist DOB is also required). Data about both artists of works currently owned by the museum and artists that have otherwise been featured in the museum are kept in the database. At any point in time, a work of art is either on display at the museum, held in storage, away from the museum as part of a traveling show, or on loan to another gallery. If on display at the museum, a work of art is also described by its location within the museum. A traveling show is described by a show ID (identifier), and the start and end dates of the show. Many of the museum works may be part of a given show, and only active shows with at least one museum work of art need be represented in the database. Every show may be visiting multiple cities and therefore has a schedule associated with it, listing the city visited, the start and end dates and the contact phone number. There may be more than 1 contact phone numbers and all the attributes are required. Notice that there is only one schedule associated with each show but the same schedule can be used more than once for shows that are travelling together. Only schedules that have been used for shows are stored in the database. Finally, another gallery is described by a gallery ID (identifier), name, and city. The museum wants to retain a complete history of loaning a work of art to other galleries, and each time a work is loaned, the museum wants to know the date the work was loaned and the date it was returned. As you develop the ERD for this problem, follow good data naming guidelines.
Answers
An ER Diagram can be created for an art museum scenario, including entities like Artwork, Artist, Show, ShowCity, ShowSchedule, Gallery, and Loan.
Explanation:ER Diagram for Art MuseumThe ER Diagram for the given scenario can be created with the following entities:
Artwork (itemId, title, type, height, width, weight)Artist (artistId, firstName, lastName, preferredName, dateOfBirth, dateOfDeath)ArtworkArtist (itemId, artistId)Show (showId, startDate, endDate)ShowCity (showId, city)ShowSchedule (showId, startDate, endDate, contactPhone)Gallery (galleryId, name, city)Loan (itemId, galleryId, loanDate, returnDate)The relationships between the entities can be represented as follows:
Artwork is developed by Artist (1 to many relationship)Show has Artwork (many to many relationship)Show has ShowCity (1 to many relationship)Show has ShowSchedule (1 to many relationship)Artwork can be on Loan to Gallery (many to many relationship)Given 3 floating-point numbers. Use a string formatting expression with conversion specifiers to output their average and their product as integers (rounded), then as floating-point numbers. Output each floating-point value with two digits after the decimal point, which can be achieved as follows:
print('%0.2f $ your_value)
Ex: If the input is:
10.3
20.4
5.0
the output is:
11 1050
11.90 1050.60
Answers
To output the average and product of three floating-point numbers as rounded integers as well as floating-point numbers with two decimal points, we can use the Python string formatting expression. Given the inputs 10.3, 20.4, and 5.0, the average is rounded to 11 and the product is rounded to 1050 as integers. As floating-point numbers, formatted with two decimal places, the average is 11.90 and the product is 1050.60.
The average calculation is (10.3 + 20.4 + 5.0) / 3, which equals 11.9 when not rounded. For the integer part, we round 11.9 to 11. The product is 10.3 * 20.4 * 5.0, which equals 1052.6, rounded to 1050 as an integer. To format these as floating-point numbers using Python string formatting: '%0.2f' % 11.9 for the average and '%0.2f' % 1052.6 for the product, yielding 11.90 and 1050.60, respectively.
Develop a menu-driven program that inputs two numbers and, at the user’s option, finds their sum, difference, product, or quotient.
Answers
Answer:
import java.util.Scanner;
public class TestClock {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.println("Enter num 1");
double num1 = in.nextDouble();
System.out.println("Enter num 2");
double num2 = in.nextDouble();
System.out.println("enter \"s\" for addition\t \"d\" for difference\t \"p\" for the product\t and \"q\" for the quotient");
char op = in.next().charAt(0);
if(op =='s'||op=='S'){
double sum = num1+num2;
System.out.println("The sum is "+sum);
}
else if(op =='d'||op=='D'){
double diff = num1-num2;
System.out.println("The difference is "+diff);
}
else if(op =='p'||op=='P'){
double prod = num1*num2;
System.out.println("The product is "+prod);
}
else if(op =='q'||op=='Q'){
double quo = num1/num2;
System.out.println("The Quotient is "+quo);
}
}
}
Explanation:
Use Scanner class to receive the two numbers and save in a two variablesCreate a new variable for Operation (op) to store a characterRequest the user to enter a character for the opearation (e.g s=sum, p=product, q=quotient and d=difference)Use if/else..if statements to implement the required operationSuppose two hosts, A and B, are separated by 15,000 kilometers and are connected by a direct link of R = 5 Mbps. Suppose the propagation speed over the link is 2.5 * 108 meters/sec.How long does it take to send a 1,500,000 bit file, assuming it is sent continuously?
Answers
Answer:
360 msec
Explanation:
Data provided in the question:
Distance between the two hosts = 15,000 kilometer
= 1.5 × 10⁷ m [ ∵ 1 km = 1000 m ]
Transmission rate, R = 5 Mbps = 5 × 10⁶ bits per second
Propagation speed over the link = 2.5 × 10⁸ meters/sec
Size of file to be sent = 1,500,000 bit
Now,
Propagation delay (dprop)
= Distance ÷ Speed
= ( 1.5 × 10⁷ ) ÷ (2.5 × 10⁸)
= 0.06 sec
= 60 msec [ ∵ 1 sec = 1000 millisecond ]
Transmission delay (dtrans)
= Size of file ÷ Rate of transmission
= 1500000 ÷ ( 5 × 10⁶ )
= 0.3 sec
= 300 msec
Therefore,
Time required for transmitting the file
= Propagation delay + Transmission delay
= 60 msec + 300 msec
= 360 msec
Final answer:
The total time to send a 1,500,000-bit file from host A to host B over a distance of 15,000 kilometers at a rate of 5 Mbps is 0.36 seconds, which is the sum of the transmission time (0.3 seconds) and the propagation delay (0.06 seconds).
Explanation:
To calculate the time taken to send a 1,500,000-bit file from host A to host B separated by 15,000 kilometers at a rate of 5 Mbps, you need to consider both the transmission time and the propagation delay. The transmission time is the time required to push all the file's bits onto the wire and is given by the file size divided by the transmission rate. The second part is the propagation delay, which is the time it takes for the first bit to travel from the source to the destination.
The transmission time can be calculated as: Transmission Time = File size / Rate = 1,500,000 bits / (5 x 10⁶ bits/sec) = 0.3 seconds.
The propagation delay is the distance divided by the speed of light in the medium, which is: Propagation Delay = Distance / Speed of light = 15,000 km / (2.5 x 10⁸ m/s) = 0.06 seconds. Since the distance needs to be in meters, we convert it by multiplying by 1,000: Propagation Delay = 15,000,000 m / (2.5 x 10⁸ m/s) = 0.06 seconds.
The total time to send the file is the sum of transmission time and propagation delay: Total Time = Transmission Time + Propagation Delay = 0.3 s + 0.06 s = 0.36 seconds.
Write a program that keeps asking the user for new values to be added to a list until the user enters 'exit' ('exit' should NOT be added to the list). These values entered by the user are added to a list we call 'initial_list'. Then write a function that takes this initial_list as input and returns another list with 3 copies of every value in the initial_list. Finally, inside main(), print out all of the values in the new list. For example: Input: Enter value to be added to list: a Enter value to be added to list: b Enter value to be added to list: c Enter value to be added to list: exit Output: a b c a b c a b
Answers
Answer:
def new_list_function(initial_list):
new_list = initial_list*3
return new_list
def main():
initial_list = []
while True:
item = input("Enter value to be added to list: ")
item = item.rstrip()
if item.lower() == "exit" and "EXIT" and "Exit":
break
initial_list.append(item)
new_list = new_list_function(initial_list)
for item in new_list:
print(item)
main()
Explanation:
Define the function new_list_function(). Compute the new_list and then return the new_list. Define the main() function. Inside the main function, loop to ask users for values.Finally print the new list.Universal containers wants to provide a different view for its users when they access an Account record in Salesforce1 instead of the standard web version. How can this be accomplished
Answers
Answer:
There are four options for this question: A and D are correct.
A. By adding a mobile layout and assigning it to a profile.
B. By adding quick actions in the publisher section
C. By adding actions in the Salesforce1 action bar section.
D. By adding Visualforce page to the mobile cards section.
Explanation:
We can add a different view for the users instead of the standard web, we can use a mobil design and assign a different profile, addition, we can implement the visualforce page to create a new view, with this option we make a better and interesting user interface with interaction with different views.
You are the manager of a midsized company that assembles personal computers. You purchase most components—such as random access memory (RAM)—in a competitive market. Based on your marketing research, consumers earning over $80,000 purchase 1.5 times more RAM than consumers with lower incomes. One morning, you pick up a copy of The Wall Street Journal and read an article indicating that input components for RAM are expected to rise in price, forcing manufacturers to produce RAM at a higher unit cost. Based on this information, what can you expect to happen to the price you pay for random access memory? Would your answer change if, in addition to this change in RAM input prices, the article indicated that consumer incomes are expected to fall over the next two years as the economy dips into recession? Explain.
Answers
Answer:
Explanation:
In this case, the price of the RAM can rise because cost increase, assume the news of the Wall Street Journal, people with earning lower $80,000 they won't buy RAM because is too expensive, and people with over these earnings will buy less RAM, in addition, the incomes will fall, and the demand of RAM will fall too, but for the same reason the price could fall for the poor demand.
Which of the following greedy strategies results in an optimal solution for the activity selection problem? Select all that applies. a. Earliest start time b. Latest finish time c. Earliest finish time d. Latest start time
Answers
Answer:
Option C and Option D.
Explanation:
When the title indicates, a greedy algorithm often makes the decision which imply to be the best overall. Which obviously makes a locally-optimal choice throughout the expectation that such a option can contribute to an answer that is generally optimal.
so, Earliest finish time and latest start time are the greedy methods resulting in an effective solution for the problems of operation selection.
Define a function print total inches, with parameters num_feet and num_inches, that prints the total number of inches. Note: There are 12 inches in a foot. Sample output with inputs: 5 8 Total inches: 68
Answers
Answer:
public static void printTotalInches(double num_feet, double num_inches){
double inches = 12*num_feet;
System.out.println("Total value in feets is: "+(inches+num_inches));
}
This function is written in Java Programming Language. Find a complete program with a call to the function in the explanation section
Explanation:
public class ANot {
public static void main(String[] args) {
//Calling the function and passing the arguments
printTotalInches(5,8);
}
public static void printTotalInches(double num_feet, double num_inches){
double inches = 12*num_feet;
System.out.println("Total value in feets is: "+(inches+num_inches));
}
}
Answer:
def calc_total_inches(num_feet, num_inches):
return num_feet*12+num_inches
Explanation:
Select the correct statement(s) regarding cellular control and traffic channels. a. When a mobile device in turned on, it connects to the nearest available base station through an available traffic channel b. Control and traffic channels are only allocated when a mobile device begins the process of making a phone call c. When a mobile device is turned on, it connects to the nearest available base station through a control channel d. All statements are correct
Answers
Answer:
c. When a mobile device is turned on, it connects to the nearest available base station through a control channel
Explanation:
A network is the communication and interconnection between Computer devices for sharing of data resources. The connection of these devices could be wireless or wired.
Wired network connection is the use of cables to connect devices, while wireless connection requires no wire.
Wireless communication could be electromagnetic, microwave, cellular etc. Cellular is mainly used for cell phone communication.
The cell phone has a database of cell tower connections and automatically connects to the nearest one through a control channel, when it's turned on.
What data discovery process, whereby objects are categorized into predetermined groups, is used in text mining?
Answers
Answer:
"Classification" is the correct answer to this question.
Explanation:
Classification is primarily a method of data processing, it makes easy for information to be separated and divided into a different business or personal goals by the data set demands.
It's also known as a mechanism of sorting or identifying information in different types of aspects or groups in the categorization of data. It is used to allocate the confidential information to the level of sensitivity.2.32 LAB: Input and formatted output: House real estate summary Sites like Zillow get input about house prices from a database and provide nice summaries for readers. Write a program with two inputs, current price and last month's price (both integers). Then, output a summary listing the price, the change since last month, and the estimated monthly mortgage computed as (currentPrice * 0.051) / 12 (Note: Output directly as a floating-point value. Do not store in a variable.). Ex: If the input is: 200000 210000 the output is: This house is $200000. The change is $-10000 since last month. The estimated monthly mortgage is $850.000000. Note: Getting the precise spacing, punctuation, and newlines exactly right is a key point of this assignment. Such precision is an important part of programming.
Answers
Final answer:
To solve the student's problem, input the current and last month's house prices, calculate the price change, compute the estimated mortgage, and correctly format the output presenting the figures.
Explanation:
To create a program that takes the current price and last month's price of a house as inputs, and outputs a summary of the price change and estimated monthly mortgage, follow these instructions:
First, prompt the user to input both the current price and the last month's price of the house.Calculate the difference between the current price and the last month's price.Compute the estimated monthly mortgage using the formula ((currentPrice * 0.051) / 12).Finally, format the output to include the current price, the price change, and the mortgage estimate. Ensure that spaces, punctuation, and newlines match the example precisely.Here's how the output should look like:
This house is $200000. The change is $-10000 since last month. The estimated monthly mortgage is $850.000000.
```python
current_price, last_month_price = map(int, input().split())
print(f'This house is ${current_price}. The change is ${last_month_price - current_price} since last month. The estimated monthly mortgage is ${(current_price * 0.051) / 12:.6f}.')
```
Explanation:The program takes two integer inputs, representing the current house price and last month's price. It then uses a formatted string to output a summary, including the current price, the change since last month (calculated by subtracting the current price from last month's price), and the estimated monthly mortgage computed using the given formula. The use of f-strings in Python allows for concise and readable code, embedding expressions directly within the string.
The map function is employed to convert the input values into integers. The program calculates the change in price by subtracting the current price from last month's price. To ensure precise spacing and formatting, the f-string includes the required text and variable values in a structured manner. The estimated monthly mortgage is calculated using the provided formula and formatted as a floating-point value with six decimal places.
The code adheres to the assignment's emphasis on precision in spacing, punctuation, and newlines. By using f-strings and the specified formula, the program produces the required output with clarity and accuracy.
Describe the basic features of the relational data model and discuss their importance to the end user and the designer. Describe the Big Data phenomenon.
Answers
Answer:
The answer to this question can be described as follows:
Explanation:
Relational data model:
The use of data tables to organize sets of entities into relationships requires a relational data model. this model work on the assumption, which is a primary key or code, that is included in each table configuration. The symbol for "relational" data links and information is used by other tables.
Model Design:
This model is used for database management, it consists of structure and language consistency. It is design in 1969.
Importance of data model:
This provides a common standard for processing the potentially sound data in machines, that was usable on almost any one device.
Big Data:
It moves to locate new and innovative ways to handle large volumes of authentication tokens and to gather business insights when offering high efficiency and usability at an affordable cost at the same time.
An internet service provider has three different subscription packages for its customers. Package A: For $9.95 per month 10 hours of access are provided. Additional hours are $2.00 per hour. Package B: For $14.95 per month 20 hours of access are provided. Additional hours are $1.00 per hour. Package C: For $19.95 per month unlimited access is provided. Your task is to write a program that calculates a customer's monthly bill. The program must ask the user which package the customer has purchased and how many hours were used for the current month. It must then display the total amount due. In addition to calculating the monthly bill for the user's current package, your program must do the following: display how much money Package A customers would save if they purchased packages B or C, and how much money Package B customers would save if they purchased Package C. If there would be no savings, no message will be printed for a particular case.
Answers
Answer:
C++.
Explanation:
int main() {
const float package_A = 9.95;
const float package_B = 14.95;
const float package_C = 19.95;
const int package_A_extra = 2;
const float package_B = 1;
/////////////////////////////////////////////////////////////////////////////
int user_package_choice;
int hours_used;
cout<<"Your package? Enter option number,"<<endl;
cout<<"1. Package A"<<endl<<"2. Package B"<<"3. Package C";
cout<<endl;
cin<<user_package;
cout<<endl;
cout<<"Hours used?: ";
cin<<hours_used;
/////////////////////////////////////////////////////////////////////////////
cout<<endl;
float total_amount;
if (user_package_choice == 1) {
total_amount = package_A + ((hours_used - 10) * package_A_extra));
if (total_amount - (package_B + ((hours_used - 20) * package_B_extra)) > 0)
cout<<"If you had opted for Package B, you would have saved $"<<total_amount - (package_B + (hours_used * package_B_extra))<<endl;
if (total_amount - package_C > 0)
cout<<"If you had opted for Package C, you would have saved $"<<total_amount - package_C;
}
else if (user_package_choice == 2) {
total_amount = package_B + ((hours_used - 20) * package_B_extra);
if (total_amount - package_C > 0)
cout<<"If you had opted for Package C, you would have saved $"<<total_amount - package_C;
}
else {
total_amount = package_C;
}
return 0;
}
Final answer:
A program is needed to compute a customer's monthly internet bill based on their subscription package and calculate potential savings for switching to other packages.
Explanation:
The task involves writing a program to calculate a customer's monthly bill based on the subscription package for internet access. There are three packages: Package A offers 10 hours for $9.95 with additional hours at $2 each, Package B provides 20 hours for $14.95 with additional hours at $1 each, and Package C offers unlimited access for $19.95. The program will also calculate potential savings for customers of Package A if they switch to Package B or C, and for Package B customers if they switch to Package C, provided switching would result in savings.
Scripts for business processes: a. are unique b. are always followed exactly c. are often modified d. are invariant e. all have the same fixed number of events
Answers
Answer:
Scripts for businesses are always followed exactly.
Explanation:
A computer script is a list of commands that are executed by a certain program or scripting engine. Scripts may be used to automate processes on a local computer.
Describe the difference between the typical states of your PC. Include shutdown, hibernation, standby, fully awake, etc.
Answers
Answer:
The answer is explained below:
Explanation:
There are various modes in a computer that can be used as per the need.
The three modes provided in a compute are Standby, sleep and Hibernate.
Hibernate: Hibernate mode saves all the open windows and then shuts down the computer. It also saves more energy because the computer goes off completely. A computer needs more time to wake up from hibernation mode.
Sleep mode: Sleep mode means different things on different computers and operating systems. In windows it means standby. It the computer has been sleeping for more than three hours then it hibernates automatically.
Standby: Standby mode is for saving energy, it puts your computer into energy saving mode.
Shutdown: If you shut down a computer then all the software programs are closed and the computer turns off. The last program to be closed is operating system.
Fully awake mode means that the computer is running normally.
Calculate the shear stress (lbf/in^2) for a given normal stress (lbf/in^2) that is applied to a material with a given cohesion (lbf/in^2) and angle of internal friction (degrees). (See MohrCoulomb failure criterion
Answers
MOHR-COULOMB FAILURE CRITERIA:
In 1900, MOHR-COULOMB states Theory of Rupture in Materials which defines as “A material fails due to because of a critical combination of normal and shear stress, not from maximum normal or shear stress”. Failure Envelope is approached by a linear relationship.
If you can not understand the below symbols see the attachment below
f f ()
Where: f = Shear Stress on Failure Plane
´= Normal Stress on Failure Plane
See the graph in the attachment
For calculating the shear stress, when Normal stress, cohesion and angle of internal friction are given. Use this formula: shear stress = f c tan
Where,
• f is Shear Stress on Failure Plane
• c is Cohesion
• is Normal Total Stress on Failure Plane
• is Friction Angle
"online privacy alliance (opa) is an organization of companies dedicated to protecting online privacy. members of opa agree to create a privacy policy for a customer that is easy to read and understand. which of the following provisions is not included in the policy?
(a) the option of choosing who sees
(b) the datatypes of data collected
(c) how data is used
(d) how collected data is secured
Answers
Answer:
Option A.
Explanation:
It is a business association working to protect your online privacy. Opa members agree to establish a User privacy Policy that is readable and understandable. So, the option of choosing who sees the data is the provision is not available in the policy because It has data types policy gathered and how data collected is protected.
According to a study by Merrill Lynch and Gartner, what percentage of all corporate data is captured and stored in some sort of unstructured form?
Answers
Answer:
85 %
Explanation:
Historically, data warehouses had been formed using structured repetitive data that was filtered before entering the data warehouse. However, in recent years, the data warehouse has evolved due to contextual information that can now be attached to unstructured data and that can also be stored.
Those first structured relational data could not be mixed and matched for analytical subjects with unstructured textual data. But with the advent of contextualization, these types of analyzes can now be done naturally and easily.
Classic analytical processing of transaction-based data is performed in the data warehouse as it has always been done. Nothing has changed there. But now you can become analytical about contextualized data, and that form of analysis is new. Most organizations, until now, did not have to base their decision making on unstructured textual data. And now there is a new way of analysis possible in a Data Warehouse: the possibility of mixing analysis. The combined analysis is performed by a combination of structured transactional data and unstructured contextual data.
According to a research by Merrill Lynch indicates that 85 % of all coporate date is stored in some sort of unstructured form like data warehouse.