Which wireless communication technology is most likely used when synchronizing device information to an automobile?
Bluetooth
NFC
RFID
Wi-Fi

Answer:

Terrestrial microwave

Explanation:

Based on the information provided it can be said that the type of transmission system being described is called a Terrestrial microwave transmission systems. This is a system used between ground-based microwave transmission antennas which produce a narrow, highly directional signal to another antenna in order to communicate information back and forth. Although very effective, it limits the communication to only the antenna's that have a line-of-sight with each other.

Option d is correct. The correct answer is terrestrial microwave. Terrestrial microwave transmission systems are used for long-distance land-based communications, requiring clear line-of-sight between the antennas due to their high-frequency, short wavelength signals.

Hence,option d is correct.

Complete Question:

___ transmission systems transmit tightly focused beams of radio signals from one ground-based microwave transmission antenna to another.

a.Satellite

b.Cellular

c.Downlink

d.Terrestrial microwave

Answer:

Explanation:

With an individual domain name we can upload all the content we want, in a free domain or share domain, upload content in some cases have a limit, for example the size of an image, in an individual domain we can add our brand, in a shared, we can add our brand side to company share those domains, we can have our own email address, practically we have a complete autonomy in our website.

Answer:

9qoqoqoqoqooq0qqqqqqqq

Answer:

The engineer installed a Bridge

Explanation:

A bridge is a networking device that serves as a link between two or more networks, therefore, making them work as a single network. Bridges function in a similar pattern as hubs and repeaters, however, they are distinct. The MAC address table is maintained to adequately direct transmissions to the receiver.

It is worthy to note that bridges operate on the Data link layer of the OSI (Open system Interconnect) model. It connects and maintains communication between multiple networks.

The bridge installed by the engineer creates stability between the two network segments. It optimizes the signal which makes the network perform better.

Answer:

The Process Approach

Explanation:

The process approach attempts to codify organizational knowledge through formalized controls, processes, and technologies. Organizations adopting the process approach may implement explicit policies governing how knowledge is to be collected, stored, and disseminated throughout the organization. The process approach frequently involves the use of information technologies to enhance the quality and speed of knowledge creation and distribution in the organizations.

Answer:

Unfortunately, you have no other option left, and you need to change the hardware. None of the other options is available to you, and hence you must do this. However, if you want you can check whether certain other operating system supports the hardware you have bought. However, you might not be acquainted with that new hardware, and hence you should change the hardware, and that is the best option for you. Find some alternative.

Explanation:

Please check the answer section.

Answer:

Excel Help

Explanation:

Press F1 key to open the excel help window

Or you can also click the excel help button to launch the help window.

Type for whatever you are seeking help for and you will notice suggestions as you type something. These suggestions include online and offline results. If there are too many results then try searching offline it will narrow down the results.

After typing the text and hitting enter, the excel help returns several related topics on the searched query. You can browse through these topics and get help from excel.

Answer:

The methodology for suited for George's use is A. Risk Management Guide for Information Technology Systems (NIST SP800-30)

Explanation:

The Risk Management Guide for Information Technology Systems (NIST SP 800-30) was set in place to conduct risk analysis on federal organizations and their information systems in the U.S.

The other options do not apply to U.S federal government agencies. Hence, George is best suited to use the Risk Management Guide for Information Technology Systems (NIST SP 800-30)

The Risk Management Guide for Information Technology Systems (NIST SP800-30) is the best methodology for George, a risk manager at a U.S. federal government agency, to use during his IT risk assessment.

For George who is a risk manager for a U.S. federal government agency and conducting a risk assessment for his agency's IT risk, the best suited methodology would be A. Risk Management Guide for Information Technology Systems (NIST SP800-30).

This is because the National Institute of Standards and Technology (NIST) possesses guidelines specifically for federal agencies to use when assessing and managing IT risks. More importantly, the SP800-30 guide provides steps for carrying out a risk evaluation and assists in risk mitigation efforts to improve the organization's risk posture.

B, C, and D options can also be followed for risk assessment but NIST SP800-30 is specifically created by a U.S. government organization and it is highly recommended to follow local guidelines.

https://brainly.com/question/31632025

#SPJ3

Answer:

Option a is the correct answer for the above question.

Explanation:

The compress techniques are used to encrypt the file and convert a larget file into a small one. This is used by some compression software. The above question asked about the method by which the receiver email memory is less used when anyone sends the document to him. It is used by the compression techniques. When the sender compresses the file then the receiver memory is less used. So the Option a is the correct answer for the above question while the other is not because:-

Answer:

Expansion card failed or became unseated.

Explanation:

A current RAID controller card was installed in such a PCIexpress slot on the user's system. Once the device is installed, the user transmits information to the device from those in the backup that you made. While the installation is finished, the system is turned off - and returned toward its correct position. Once he turns on his system, then he immediately obtains the error message that is not found on the RAID.

So, Expansion card may have failed or unseated issues may have emerged.

The problem might be :

Expansion card failed or became unseated.

Here,

A current RAID controller card was installed in such a PCI express slot on the user's system. Once the device is installed, the user transmits information to the device from those in the backup that you made. While the installation is finished, the system is turned off - and returned toward its correct position. Once he turns on his system, then he immediately obtains the error message that is not found on the RAID.

Thus,

Expansion card may have failed or unseated issues may have emerged.

Know more about RAID ,

https://brainly.com/question/31935278

#SPJ6

Answer:

implementation hiding allows the programmer to change the way in which a method works internally without affecting the programs that utilize  the method.

Explanation:

Implementation hiding is an example of encapsulation in OOP which enables a programmer or coder to hide method implementation from outside world and in this technique the program is also not affected by the method that it is using

Answer:

Implementation hiding.

Explanation:

A method is a group of one or more statements, defined in a class. The class holds the attributes and behaviours of objects in its class and implements the defined method from an interface.

To avoid the method statements from been seen, it is encapsulated, hidden internally but functional when called upon. This encapsulation process is called implementation hiding.

Answer:

Worm

Explanation:

This is what a worm does! It exploits small security holes in networks and computers.

Answer:

C. Bottom-up approach will be used in this scenario.

Explanation:

The OSI or Open Systems Interconnection is an architecture that comprises of seven (7) layers, each layer unique in its functionality. The layer is listed below:

7. Application layer

6. Presentation layer

5. Session layer

4. Transport layer

3. Network layer

2. Data link layer

1. Physical layer

Layer 1 - 3 are considered the hardware layers, Layer 4 is considered as the heart of the OSI model while layers 5 - 7 are considered the software layers.

Back to our question, once you decide to troubleshoot from the physical layer of the OSI model, you are troubleshooting this problem from a bottom-up approach.

Answer:

The module that Jenny should order is C. SO-DIMM DDR3

Explanation:

SO-DIMM or "Small Outline Dual In line Memory Module is a type of RAM (Random Access Memory) that is built using integrated circuits.

SO-DIMMs are used in personal computers, notebooks, and laptops. Usually computers with limited space

SO-DIMM DDR3 has 204 pins, and is identified by the single notch it has very close to the center.

Jenny should order a SO-DIMM DDR3 SDRAM because it will fit perfectly into her machine.

Answer:

print("I like to code")

Explanation:

In the Programming Languages, print() function is used to print any string, display any output or both at the same time as well as we can print it one by one. We can also print addition, subtraction, multiplication and other problems directly without saving it in other objects or variables.

In the above statement, the correct method of printing any string is to write that string inside the parameter with a double-quote.

The second option is incorrect because in it double-quote is not used.

The third option is incorrect because the following sequence is not correct.

Answer:

answer is A, print ( "I like to code" )

Explanation:

Because I do coding.

Final answer:

The number of times the code must be repeated depends on the width of the canvas, which is not provided. If hypothetically assuming a canvas width of 400 pixels, Tracy would need to move 8 times to reach the right edge.

Explanation:

The question 'If Tracy starts on the left edge of the canvas and moves forward 50 pixels, how many times will this code need to be repeated to have Tracy reach the right edge of the canvas?' is asking us to determine the number of iterations required for a movement command in a programming context to cross a given distance. To answer this, we need the width of the canvas in pixels. Once the width is known, we would divide it by the movement distance (50 pixels) to find out how many 50-pixel movements are needed to reach the right edge. Since the width of the canvas is not provided, we are unable to give a specific answer. However, if we assume the canvas is 400 pixels wide (as an example), then Tracy would need to move 400/50 = 8 times to reach the right edge.

Final answer:

To reach the right edge of the canvas, Tracy needs to repeat the code 10 times.

Explanation:

To reach the right edge of the canvas, Tracy needs to repeat the code multiple times. Let's assume that the canvas is 500 pixels wide. If Tracy moves forward 50 pixels each time, she will need to repeat the code 10 times (500/50 = 10) to reach the right edge of the canvas.

Answer:

IPsec

Explanation:

CPU & PSU are computer components. VPN is software. IPsec stands for Internet Protocol security

Final answer:

IPsec is an example of a protocol, which is a set of rules for transmitting data, used to secure internet communication across an IP network.

Explanation:

An example of a protocol from the options provided is IPsec. A protocol is a set of rules or procedures for transmitting data between electronic devices, such as computers. In the context of internet security, IPsec, which stands for Internet Protocol Security, is used to secure internet communication across an IP network. IPsec helps to protect data flows between a pair of hosts (end-to-end communication), between a pair of security gateways (network-to-network), or between a security gateway and a host.

Other protocols of note include FTP (file transfer protocol) and its secure version, SFTP (secure file transfer protocol), designed specifically for transferring files in a secure manner.

Answer:

This is called a domain name

Explanation:

A domain name is an address used by internet users to access a website.

Answer:

Hackers frequently spend long hours examining the types and structures of targeted systems because they must use guile, or fraud to bypass the controls placed on information owned by someone else.

Explanation

The perception of a hacker has evolved over the years.

Hackers used to be viewed as people who would sit in a place and try to remotely gain access to a computer. This perception has changed because, hackers can work with people in an organization, suppliers, or may even write a program to do the hacking.

This is an individual or an organization who is very proficient with the use of the computer and who can use these skills to breach the cyber security of other individuals or organizations.

When a hacker does this to check the limitations and weaknesses of a cyber network so that it can be improved, it is called Ethical Hacking.

Learn more about Hackers at:

https://brainly.com/question/23294592

Answer:

Option 1 is correct.

Explanation:

She is prepared to begin her initial Smart Display campaign, but her account is not yet worthy because she hasn't had sufficient conversions during the last 30 days. So, at least 50 View Conversions or at least 100 Search Conversions required for the required number of transformations that are worthy of the Smart Display campaign.

Answer: maybe his wrtting ezam

Explanation:

In the act of documenting his work, he could be writing an essay, article or an autobiography.

A documentation style is known to be an approach used in citation of  different sources that an author of a paper has used.

Note that In the act of documenting his work, he could be writing an essay, article or an autobiography.

Learn more about writing from

https://brainly.com/question/1643608

#SPJ9

Answer:

sjdjk

Explanation:

sx'989

Answer:

Examples of Hardware:

Mouse, Monitor, Keyboard, Scanner, Camera, Speaker, Printer, Game-pad, Joystick, Light-pen, RAM, Motherboard, Hard-Drive, CPU, Flash-drive, CD-Drive, e.t.c

Explanation:

Hardware refers to the physical part of the computer system that can be seen, felt and touch. We have input hardware, processing hardware, output hardware, storage hardware and communication hardware.

Input Hardware:- This refers to the part of the computer that are use to send data into the computer.

Processing Hardware: There are responsible for co-ordinating and controlling the activities of the computer system.

Output Hardware: This refers to the part of the computer that sends signal and processed data out of the computer.

Storage Hardware: These are use for storing data and files.

Communication Hardware: This are devices that allow information to be sent from one person to another.

From our example:

Mouse- Input Device

Monitor- Output Device

Keyboard- Input Device

Scanner- Input Device

Camera-  Input/Output Device

Speaker- Output Device

Printer- Output Device

Game-pad- Input Device

Lightpen- Input Device

Joystick- Input Device

RAM- Storage Device

Motherboard- Processing Device

Hard-Drive- Storage Device

CPU- Processing Device

FlashDrive- Storage Device

CD-Drive- Storage Device

Telephone- Communication Device

Answer:

Same browser

Explanation:

A user saves a password on a website the user logs into from a desktop. As long as the the browser used is the same and the user has saved the password on the browser, it does not matter which device the user uses, the password would be saved on the website.

Therefore same browser is important for a website to save the password logged in from any other device.

I hope the answer was helpful.

Thanks for asking.

Answer:

The answer is "Option C".

Explanation:

This technique is also known as walking-sectional experimental research, which only collects information at one stage. The goal of using this strategy is to create a single point, that provides representations to the population of interest, and other choices were wrong, that can be described as follows:

Answer:

True.

Explanation:

An investigator administers a practice test as the intervention group for all the participants in a school testing out a new curriculum as well as for the participants in the individual school. The analysis of just the scores for the two groups of students is thus of limited usefulness as a pilot study but has many challenges to the point that it is useful to assess the results of the program.

Attached to the keyboard is the typical location of a touchpad inside of a laptop.

Explanation:

The touchpad, by a long shot the most well-known sort, is a level territory, situated underneath your console. A pointing stick is a little catch situated among your PC's keys. The conventional touchpad is a rectangular, contact delicate cushion, generally focused beneath the console in the scratch pad's palm rest. Moving your finger over the outside of this cushion moves the mouse.

And the cushion is devoted left-and right-click catches, and now and again a middle snap. In the event that you need to right-tap on a workstation without utilizing the trackpad, you can do it utilizing a console easy route. Position the cursor and hold down "Move" and press "F10" to right-click. A few workstations additionally have a particular key called a "Menu" key that can be utilized for right-clicking.

Answer:

result = 0

i = lo

while i <= hi:

       result = result + i

       i += 1

Explanation:

Initialize the result as 0 to hold the summation value.

Since we are asked not to change the value of lo and hi, our loop control variable is i and initially it starts from lo.

Since we are asked to add the number from lo to hi, while loop condition checks it.

While the condition satisfies (during each iteration), the value of i is added to the result and the value of i is incremented by one.

Final answer:

To add integers from lo through hi inclusively without changing their values, initialize i to lo, use a while loop to increment and add i to result until i exceeds hi.

Explanation:

To solve this exercise and add the integers from lo up through hi (inclusive), without changing the values associated with lo and hi, you can use a while loop in programming. To do this correctly, we will initialize a temporary variable i to the value of lo at the start and use it to iterate until it exceeds hi. The result variable will accumulate the sum of these integers. Here is how the code could look:

i = lo
result = 0
while i <= hi:
   result += i
   i += 1
This loop starts at lo, and for each iteration, it adds the value of i to result, then increments i by 1 until i is greater than hi. The key here is not altering the original values of lo and hi, fulfilling the problem requirement.

Answer:

"Feedback" is the correct answer for the above question.

Explanation:

data declaration means a variable which contain data value and it can be declared as integer, float, character, double, boolean (data types).

example:

int r;

char name;

float g;

double k= 23.34;