Answer:
B electrons because Valence electrons of the elements in the bond are shared. The gain , loss , or sharing of electrons occurs in every chemical bond.
Explain how algae is indirectly essential to consumers in ecosystems, for example, polar bears.
Answer:
"No man is an island.” This saying is also true for organisms in an ecosystem. No organism exists in isolation. Individual organisms live together in an ecosystem and depend on one another. In fact, they have many different types of interactions with each other, and many of these interactions are critical for their survival.
So what do these interactions look like in an ecosystem? One category of interactions describes the different ways organisms obtain their food and energy. Some organisms can make their own food, and other organisms have to get their food by eating other organisms. An organism that must obtain their nutrients by eating (consuming) other organisms is called a consumer, or a heterotroph. While there are a lot of fancy words related to the sciences, one of the great things is that many of them are based on Latin or Greek roots. For example, heterotroph becomes easier to remember when you realize that in Greek, “hetero” means “other” and “troph” means food; in other words, heterotrophs eat other organisms to get their food. They then use the energy and materials in that food to grow, reproduce and carry out all of their life activities. All animals, all fungi, and some kinds of bacteria are heterotrophs and consumers. .
Explanation:
Answer:
Polar bear are found in the Arctic region. The polar bear feed on fishes, insects etc.
The algae undergoes photosynthesis and produces food through this.The algae is a source of food for the fishes in water. The algae makes the fishes grow and develop after providing it with the nutrients needed to do so.
The fishes are then eaten by the polar bear. Without the algae the fishes may starve and the polar bear may starve to death too due lack of preys such as the fish. This cycle makes the algae a very important source of energy.
What is the theoretical yield for CCl4 reacting with 100.0 grams of Cl2 with excess CS2.
Theoretical yield is 216.88 grams when reacting with 100.0 grams of Cl2 with excess CS2.
Explanation:
Theoretical yield is the complete conversion of a limiting reagent in product.
In the equation given
3Cl2 + CS2 ⇒ CCl4
100 grams of Cl2 will give
number of moles = [tex]\frac{mass given}{atomic mass}[/tex]
= [tex]\frac{100}{70.906}[/tex]
= 1.41 moles
3 moles of Cl2 gives 1 mole of CCl4
1.41 moles of Cl2 will give x moles of CCl4
[tex]\frac{1}{3}[/tex] = [tex]\frac{x}{1.41}[/tex]
0.47 moles of CCl4 is formed
Theoretical yield is 0.47 x 153.82
= 216.88 grams.
100 gram of Cl2 is the limiting reagent in the reaction which produced 216.88 grams of CCl4.
explain polarizing power with ionic radius
Answer:
Polarizing Power is the basis of Fajan's rules of covalent character generally in ionic compounds.
Charges and radius are a function of Polarizing Power, because the higher the charge is, the larger the polarizing power is for cations with the same radius. Also the smaller the radius is, the larger the polarizing power is for cations with the same charge.
Explanation:
does sealing a tanker car cause it to implode?
Answer:
yes
Explanation:
the build up of pressure eventually becomes to much for the tanker then yes, it will implode with a possibility of an explosion.
1. After examining the DNA fingerprint of the victim and then the seven suspects, which
suspect committed the crime? How did you determine this?
Suspect #1's DNA has a significant match with the semen evidence from the crime scene, leading to strong evidence against them. If an offspring's DNA does not match that of the supposed parents, it calls into question paternity, maternity, or potential lab errors during analysis.
Explanation:DNA Fingerprinting Evidence Analysis
Based on the description provided, it's clear that DNA fingerprinting is employed to compare DNA samples from a crime scene to those of multiple suspects to establish guilt or innocence. The DNA pattern from the semen evidence found at the crime scene must match that of the perpetrator. Given that suspect #2 can be definitively excluded as the perpetrator because none of his DNA bands match the evidence, we must analyze suspect #1. While it is impossible to assert with absolute certainty that suspect #1 is guilty, statistics reveal that the likelihood of a random individual having a matching DNA fingerprint, with all six alleles aligning, is approximately 1 in 4096. This information might lead one to view the evidence against suspect #1 as strong, especially considering this suspect was not selected at random.
If we consider the offspring relation to the mother and father, the pattern of DNA bands of the offspring should contain a mixture of bands that match both parents, due to the inheriting of alleles from each parent. If an offspring’s DNA fingerprint does not match either parent, the most likely conclusion is that there is a case of mistaken paternity or maternity, or perhaps a lab error during the analysis.
Conclusion from DNA Evidence
After examining the evidence and the concepts of DNA matching probabilities, one would conclude that suspect #1's DNA shows a statistically significant match to the semen evidence against the probability of a coincidental match. However, in forensic science, while extremely unlikely, a coincidental match is still within the realms of possibility. The nature of such evidence should be weighed within the broader context of the investigation and other available evidence.
The correct suspect who committed the crime is Suspect 5.
To determine which suspect committed the crime, one would typically analyze the DNA fingerprint of the victim and compare it with the DNA fingerprints of the seven suspects. A DNA fingerprint is a unique pattern of DNA fragments obtained by analyzing specific regions of an individual's DNA that vary greatly from person to person. These regions often include repetitive sequences known as short tandem repeats (STRs) or variable number tandem repeats (VNTRs).
The process involves the following steps:
1. Collecting DNA samples from the crime scene and from each of the suspects.
2. Extracting DNA from these samples.
3. Amplifying specific regions of the DNA using a technique called Polymerase Chain Reaction (PCR).
4. Separating the amplified DNA fragments using gel electrophoresis.
5. Visualizing the DNA fragments using a method such as autoradiography or staining.
6. Comparing the DNA fingerprint from the crime scene with those of the suspects.
The DNA fingerprint from the crime scene will have a unique pattern of bands corresponding to the STRs or VNTRs. Each suspect's DNA will also produce a unique pattern. The suspect whose DNA fingerprint matches the pattern found at the crime scene is the one who committed the crime.
In this scenario, after comparing the DNA fingerprints, it was found that Suspect 5's DNA matched the DNA found at the crime scene. This match would be evident by the identical or nearly identical banding patterns between the crime scene sample and Suspect 5's DNA sample. All other suspects would have different banding patterns that do not match the crime scene sample.
Therefore, based on the DNA evidence, Suspect 5 is identified as the perpetrator of the crime. It is important to note that while DNA evidence is very strong, it is often used in conjunction with other types of evidence to establish guilt beyond a reasonable doubt in a court of law.
In general, in what type of solvent (non-polar, moderately polar, or highly polar) are polar solutes most soluble? Explain why.
Answer:
In general, polar solutes are most soluble in highly polar solvents.
Explanation:
The general rule is "like dissolves like" which means that polar solvents dissolve polar (or ionic) solutes and non-polar solvents dissolve non-polar solutes.
In order for a solvent dissolve a solute, the strength of the interacttion (force) between the solute and the solvent units (atoms, molecules, or ions) must be stronger than the strength of the forces that keep together he particles of the pure substances (known as intermolecular forces).
Since the nature of the interactions between the units are electrostatic, the more polar is the solvent the better it will be able to attract and surround the solute particles, keeping them separated and in solution. That mechanism explains why polar solutes will be most soluble in highly polar solvents.
Polar solutes dissolve best in highly polar solvents due to similar intermolecular forces. This principle is known as 'like dissolves like,' where substances with comparable properties mix well.
In general, polar solutes are most soluble in highly polar solvents. This is due to the principle that like dissolves like, meaning substances with similar intermolecular forces tend to dissolve well in each other. Polar solvents, such as water, have large dipole moments and can form hydrogen bonds with polar solutes, facilitating their dissolution.
For example, ethanol (C₂H₅OH), a polar solute, is highly soluble in water because both the solute and the solvent can engage in hydrogen bonding. Conversely, non-polar solvents like hexane are not effective in dissolving polar solutes because the intermolecular forces are not compatible; hexane lacks the ability to form hydrogen bonds and thus cannot readily interact with polar molecules.
Let's consider an example: Would iodine (I₂) be more soluble in carbon tetrachloride (CCl₄) or water (H₂O)? Iodine is a non-polar molecule, so it would dissolve better in CCl₄, which is non-polar, rather than in water, which is polar.
What does this diagram represent?
Answer:
The amount of electrons in each atom of the element
Explanation:
Answer:
The amount of electrons in each element of the atom.
Find the velocity of a swimmer who swims exactly 220 m toward the shore in 72 s.
a
3.1 m/s
b
0.33 s/m
c
3.06 s
d
0.33 m/s
Answer: 3.06m/s
Explanation:
Distance covered by swimmer = 220 m
Time taken by swimmer = 72 s.
Velocity = ?
Recall that velocity is the rate of change of distance per unit time. it is measured in metres per second.
Velocity = Distance / time taken
Velocity = 220m / 72seconds
Velocity = 3.055 m/s (approximate to 3.06m/s)
Aluminum is a metallic element with 3 valence
electrons. What is its oxidation number?
Answer:
The neutral atoms of the element have an oxidation number of 0. When the atoms loose their three valence electrons to form ions they then have an oxidation number of +3
Explanation:
The oxidation number of aluminum, which has 3 valence electrons, is typically +3. This represents the charge held by the atom when it loses these valence electrons in reactions, demonstrating the notion of oxidation.
Explanation:The oxidation number of an atom is the charge that atom would have if the compound was entirely ionic. Aluminum, a metallic element with 3 valence electrons, typically loses these electrons in reactions, resulting in a positive oxidation number. In the case of aluminum, because it loses its three valence electrons, its oxidation number is usually +3. This means an aluminum atom, after ionizing, has lost three electrons and carries a charged of +3. The loss of electrons is represented as oxidation in chemistry.
Learn more about Oxidation number of Aluminum here:https://brainly.com/question/34664612
#SPJ2
If two lemons from the same plant are cross-bred will the result be deformed?
How many atoms of Hydrogen are in 67.2 L of H2 at STP?
Answer:
One mole of any substance contains Avogadro's number of atoms = 6.022 x 10^23 atoms. So multiply number of moles x number of atoms/mole = 1.8066 x 10^24 atoms of H2.
Explanation:
I'm not sure though
what did rutherfords madel of the atom not tell us about the atom
Rutherford's model of the atom did not tell us the following things:
Rutherford model states that the electrons wander around the nucleus orbits that are fixed paths. In Maxwell theory, when the accelerated charged particles produce electromagnetic radiations, an electron that moves around the nucleus also emits electromagnetic radiation.
This radiation carries energy from the movement of the electron which comes by the shrinking of orbits. Hence, the electrons will collapse in the nucleus. Studies show that, an electron would collapse in the nucleus in less than 8-10 seconds as per Rutherford model.
So Rutherford model failed to be in conforming with Maxwell’s theory as it did not explain the stability of an atom. Another thing about Rutherford model is that, he did not state anything about the electron arrangement in an atom which made it as incomplete.
Though the early atomic models seemed to be not accurate and not explained some experimental results, they form the quantum mechanics base for developments of future in the world.
What's the molar mass of Calcium Chloride?
Hey there!
Molar mass of CaCl₂:
Add the molar masses of each element multiplied by the amount of that element we have.
Ca: 1 x 40.078
Cl: 2 x 35.453
---------------------
110.98 grams
The molar mass of calcium chloride is 110.98 grams.
Hope this helps!
The molar mass of Calcium Chloride (CaCl2) is 111.0 grams per mole.
To calculate the molar mass of calcium chloride, which is represented by the formula CaCl2, you must add the molar masses of calcium (Ca) and chlorine (Cl) atoms. Calcium has a molar mass of 40.0 grams per mole, while chlorine has a molar mass of 35.5 grams per mole. Since there are two chlorine atoms in calcium chloride, you must multiply the molar mass of chlorine by 2. Therefore, the total molar mass of calcium chloride is the sum of the molar mass of calcium plus two times the molar mass of chlorine: Ca (40.0 g/mol) + 2 × Cl (35.5 g/mol) = 111.0 g/mol.
Which kind of reaction does this graph represent?
A. endothermic because AHrxn = -876.8 kJ
B. endothermic because A Hoxn = 876.8 kJ
C. exothermic because Ahox = -1,099.6 kJ
D. exothermic because AHoxn = 1.099.6 kJ
Answer:
The answer is B !!!
Explanation:
Prokaryotic and eukaryotic cells are alike because ......
Answer:
DNA is something they have in common.
Explanation:
molarity is most often used when the solute is a solid, and the solvent is a solid. True or false
Answer:
true
Explanation:
Answer:
false
Explanation:
Molarity refers to the amount of solute present in a solution. Molarity is usually expressed in the unit, moles per decimeter cubed or moles per litre. It can be used to estimate the concentration of a solution irrespective of whether the solute is solid, liquid or gas. It does not particularly apply to solid solutes.
Acid solutions which usually consists of liquid solutes are also expressed in molarity units as well as solid solutes.
Ground water is:
O stored in porous soil and rock
o part of the nitrogen cycle
O reduced by respiration
O unavailable to plants
the answer is: Ground water is water beneath the earth’s soil stored in soil pore spaces and in fractures of rock formations. :)
Which of the following is an important difference between climate and weather?
A. Climate deals with a longer time period than weather.
B. Weather describes wind direction and climate doesn't.
C. Climate describes wind direction and weather doesn't.
D. Climate deals with a shorter time period than weather.
A
Explanation:
Weather can be defined as the day-to-day changes in the atmospheric parameters like temperatures, humidity, rainfall, and pressure. When these weather changes are observed for approximately over 30 years, the climate of the regions can be determined by understanding the patterns.
PLEASE ANSWER
Airport security uses electromagnetic waves to see items inside of luggage without having to open the bags. Which type of electromagnetic waves would be best for airport security to use?
A, X-rays would be best because they are low-energy waves that can penetrate gases.
B. Radar waves would be best because they are high-energy waves that can penetrate solids.
C. Radar waves would be best because they are low-energy waves that can penetrate gases.
D. X-rays would be best because they are high-energy waves that can penetrate solids.
Answer:
Answer is D
Explanation:
xrays would be far more efficient at detecting objects through solids.
X-rays would be best because they are high-energy waves that can penetrate solids ( D )
X-rays have shorter wavelengths and higher frequency when compared to radio waves therefore they have higher energy which is required to penetrate solids at the Airport.
Therefore X-rays would be a better suited electromagnetic wave to be used by Airport security to see items inside a luggage.
Hence we can conclude that The type of electromagnetic wave that would be the best for airport security to use is X-rays.
Learn more : https://brainly.com/question/20334370
How can the idea that different minerals are formed in different environments provide evidence for energy and matter cycling?
Answer:
The importance of crystal structure. The graphite-diamond mineral pair is an extreme example of the importance of crystal structure. These two very different minerals have exactly the same chemical formula (C), but the crystal structure of the two minerals is very different. In graphite, carbon atoms are bonded together along a flat plane, as shown in Figure 3.
Explanation:
The importance of crystal structure. The graphite-diamond mineral pair is an extreme example of the importance of crystal structure. These two very different minerals have exactly the same chemical formula (C), but the crystal structure of the two minerals is very different. In graphite, carbon atoms are bonded together along a flat plane, as shown in Figure 3.
The different minerals that are formed in different environments can be used to illustrate that different environments possess unique environmental properties which are vital in making up matter.
It should be noted that life on Earth follows a cyclical nature such that the energy that is gotten from the sun is recycled back into space. Also, the terrestrial, aquatic, and arboreal environments all have different energy that circulates in the ecosystem.
Furthermore, there are several factors such as climate that helps in the formation of soil which is a required constituent in some minerals.
Read related link on:
https://brainly.com/question/20321095
.Convert 350.0 mL at 740.0 mm of Hg to its new volume at standard pressure.
Answer:
340.8mL
Explanation:
The following data were obtained from the question:
P1 = 740.0mmHg
V1 = 350.0mL
P2 = at stp = 760mmHg
V2 =?
Using Boyle's law equation P1V1 = P2V2, we can easily find the new volume as illustrated below:
P1V1 = P2V2
740 x 350 = 760 x V2
Divide both side by 760
V2 = (740 x 350) /760
V2 = 340.8mL
The new volume is 340.8mL
To convert the volume at a different pressure to its new volume at standard pressure, use Boyle's Law. Substituting the given values into the equation, the new volume at standard pressure is 343.42 mL.
Explanation:To convert the volume at a different pressure to its new volume at standard pressure, we can use Boyle's Law. Boyle's Law states that the pressure and volume of a gas are inversely proportional at constant temperature.
We can use the equation:
P1V1 = P2V2
Where P1 and V1 represent the initial pressure and volume, and P2 and V2 represent the new pressure and volume. Rearranging the equation, we get:
V2 = (P1V1) / P2
Substituting the given values into the equation, we have:
V2 = (740.0 mmHg * 350.0 mL) / (760.0 mmHg)
V2 = 343.42 mL
Therefore, the new volume at standard pressure is 343.42 mL.
Question 26 (1 point)
How many grams of KCI must be dissolved in 200 grams of
water to make a saturated solution at 60°C?
Answer:
Click on the picture to get full view! This is what I had on mine!
Hope this helps! If so please mark brainliest and rate/heart if it did to help my account!!
Approximately 68.4 grams of KCI should be dissolved in 200 grams of water at 60°C to make a saturated solution.
Explanation:To find the amount of KCI that must be dissolved in 200 grams of water to make a saturated solution at 60°C, we need to use the solubility data for KCI. At 60°C, the solubility of KCI in water is approximately 34.2 grams per 100 grams of water. Therefore, in 200 grams of water, the amount of KCI that needs to be dissolved would be:
(34.2 grams / 100 grams) x 200 grams = 68.4 grams
So, 68.4 grams of KCI must be dissolved in 200 grams of water to make a saturated solution at 60°C.
Learn more about saturated solution here:https://brainly.com/question/18482334
#SPJ3
space capsules operate with an oxygen content of about 34%. assuming a total pressure of 780 mm Hg in the space capsule, what is the partial pressure of the oxygen?
265.2 mmHg is the partial pressure of oxygen in 780 mmHg of total pressure.
Explanation:
The partial pressure of a gas is defined as the individual pressure of the gas in total mixture. In an ideal gas all the constituent gases have partial pressure some of which will give total pressure of the gas.
The partial pressure of a gas is calculated by
total pressure x mole fraction of the gas.
Mole fraction of the oxygen present is 0.34 as it is 34% of the total gas.
[tex]\frac{34}{100}[/tex] = 0.34 is the mole fraction
Total pressure is given as 780 mm Hg
The partial pressure can be calculated using the above formula:
Putting the values in equation:
780 x 0.34
= 265.2 mm Hg is the partial pressure of oxygen.
Identify the correct statement regarding the strength of chemical bonds.
A).Strong bonds form with large atoms and weak bonds with small atoms.
B).Strong bonds occur with high temperature and weak bonds with low C).temperature. Weak bonds require more energy to form than strong bonds.
Answer:
Weak bonds require more energy to form than strong bonds. is the right answer
Explanation:
The correct statement regarding the strength of chemical bonds is Weak bonds require more energy to form than strong bonds.
What are chemical bonds?Chemical bonds associates atoms with molecules, ions, crystals, and other stable species that make up the familiar compounds.
When atoms come close together, their nuclei and electrons interact and tend to distribute themselves in space in such a way that the total energy is lower than in any other configuration.
There are different types of chemical bonds like; ionic bonds, covalent bonds, hydrogen bonds, etc.
Thus, the correct option is D. Weak bonds require more energy to form than strong bonds.
Learn more about chemical bonds
https://brainly.com/question/6071754
What is the difference between a primitive and body centered unit cell?
Answer:
In a primitive unit cell, particles or points are present only at the corners while in a centred unit cell, the particles or points are also present at other positions in addition to the corner.
Final answer:
The primary difference between primitive and body-centered unit cells is the number and arrangement of atoms: A primitive unit cell contains atoms only at the corners, while a body-centered unit cell has an additional atom at its center. Body-centered cells have a higher packing efficiency and contain two atoms per unit cell.
Explanation:
The difference between a primitive and body-centered unit cell lies in the arrangement and number of atoms. A primitive unit cell has atoms only at its corners, and when such cells are stacked together in three dimensions, each corner atom is shared by eight unit cells, effectively making up one atom per cell. In contrast, a body-centered unit cell not only has atoms at its corners but also contains an additional atom at the center of the cell, which is not shared with any other cells. This gives the body-centered unit cell a total of two atoms, contributing to its higher packing efficiency compared to the simple cubic unit cell.
For example, a simple cubic unit cell, like that found in Polonium, coincides with its primitive cell as both contain the equivalent of one atom. In the case of body-centered cubic (BCC) unit cells, which are more common due to their tightly packed atoms, the presence of the central atom along with the corner atoms results in a packing efficiency of about 68%. This contrasts with the simple cubic cell's efficiency of 52%. The BCC structure is capable of filling all space when repeated indefinitely and is thus used to 'build' the crystal lattice.
How many energy levels dose a tungsten atom have?
Answer:
Tungsten atom has 6 energy level
Explanation:
6 energy levels of tungsten atom
Energy level 1 - 2
Energy level 2 - 8
Energy level 3 - 18
Energy level 4 - 32
Energy level 5 - 12
Energy level 6 - 2
What's a tungsten atom
Is a chemical element with the symbol W and with an atomic number 74.
How do bears, birds, invertebrates and trees each benefit from the presence of salmon?
Answer:
Food source
Explanation:
Salmon are there food source
Why must the chemical equation be balanced ?
A. Insure proper computation of molecular mass
B.To do extra work
C.Insure proper mole ratio between reactants and products
D.to fulfill the Law of Conservation of Energy
Answer:
D
Explanation:
the answer is d as the law of conservation must be hold good during the equation
How many grams of NaCl should be obtained to make 150 mL of 4.5 M solution
Answer:
39,5 grams should be obtained of NaCl
Explanation:
We calculate the weight of 1 mol of NaCl:
Weight 1 mol NaCl= Weight Na + Weight Cl= 23g + 35,5g=58,5 g/mol
4,5M--> 4,5 moles NaCl in 1000ml (1L) of solution
1000ml-----4,5 moles NaCl
150 ml------x=(150 mlx4,5 moles NaCl)/1000ml=0,675 moles NaCl
1 mol NaCl--------------58,5 grams
0,675molesNaCl---x= (0,675molesNaClx58,5 grams)/1 mol NaCl
x= 39,4879 grams
6. How many half-filled orbitals are in a bromine atom?
1, 2,3,4
Answer:
Bromine has one half filled orbital.
Explanation:
The elements of group 17 are called halogens. These are six elements Fluorine, Chlorine, Bromine, Iodine, Astatine. Halogens are very reactive these elements can not be found free in nature. Their chemical properties are resemble greatly with each other. As we move down the group in periodic table size of halogens increases that's way fluorine is smaller in size as compared to other halogens elements. Their boiling points also increases down the group which changes their physical states. i.e fluorine is gas while bromine is liquid and iodine is solid.
Electronic configuration of bromine:
₃₅Br = [Ar] 3d¹⁰ 4s² 4p⁵
As it in known that p sub-shell consist of 3 orbitals px, py, pz and each orbital can accommodate only two electrons.
In bromine there are 5 electrons in 4p it means two electrons are present in px two in py ans one in pz. So the half filled orbital is only one.