liquid is fluid in motion, needing to be contained. while a solid state of matter is as such and won't run down the cabinet
Answer:
When an element or substance is in a liquid state, the particles are joined by less attractive forces than in solids, for this reason the particles of a liquid can move freely.For this reason the particles of a liquid can move freely and need a recipient that contains them .
Liquids have a defined volume but with a variable shape, this means that liquids adopt the shape of the container but always occupy the same space
For example, if we have 4 L of water in a round container, its shape is round and now we put the water in a square container, its shape is now square but its volume is still 4 L (it continues to occupy the same space)
What temperature does table salt melt at?
1,474 degrees fahrenheit (801 degrees celsius)
Salt, also known as sodium chloride, melts roughly around 801 degrees Celsius or 1473.8 Fahrenheit.
I think this is mainly for table salt.
iron reacts with sulfur to form iron sulfide. If 60 grams of iron reacts with sulfur to produce 90 grams of iron sulfide how much sulfur has been used in the chemical reaction
Answer:
34.44 g.
Explanation:
The balanced equation for the reaction is:Fe + S → FeS,
It is clear that 1.0 mol of Fe reacts with 1.0 mol of S to produce 1.0 mol FeS.
We need to calculate the no. of moles of 60 grams of iron and 90 grams of iron sulfide:
no. of moles of Fe = mass/atomic mass = (60.0 g)/(55.845 g/mol) = 1.074 mol.
no. of moles of FeS = mass/molar mass = (90.0 g)/(87.91 g/mol) = 1.024 mol.
∵ Fe reacts with S with (1: 1) molar ratio.
∴ The no. of moles of S needed to react with Fe is 1.074 mol.
∴ The no. of grams of S needed = no. of moles x molar mass = (1.074 mol)(32.065 g/mol) = 34.44 g.
Answer:
The answer is:
A. 30 grams
Explanation:
what is the theoretical yield of copper produced by this reaction Al with CuCl2 Al - 0.5g CuCl2 - 3.5g
Answer:
The theoretical yield of copper is approximately 1.65 grams.
Explanation:
Relative atomic mass data from a modern periodic table:
Al: 26.982;Cu: 63.546;Cl: 35.45.What's the balanced equation for the reaction between [tex]\text{Al}[/tex] and [tex]\text{CuCl}_2[/tex]?As a metal, aluminum is more reactive than copper. Aluminum will reduce the [tex]\text{Cu}^{2+}[/tex] ion in [tex]\text{CuCl}_2\;(aq)[/tex] to [tex]\text{Cu}\;(s)[/tex]. This process will form a positive aluminum ion, which will then combine with chloride ions in the solution. What will be the charge on each aluminum ion? Aluminum is in IUPAC Group 13 of the periodic table. Each aluminum atom contains three valence electrons. As a main group metal in the p-block, each atom will lose all three of its valence electrons to form [tex]\text{Al}^{3+}[/tex] ions with three positive charges. Each ion will combine with three [tex]\text{Cl}^{-}[/tex] ions to produce a species with the empirical formula [tex]\text{Al}\text{Cl}_3[/tex].
Reactants:
[tex]\text{Al}\;(s)[/tex] and[tex]\text{CuCl}_2\;(aq)[/tex].Products:
[tex]\text{AlCl}_3\;(aq)[/tex] and[tex]\text{Cu}\;(s)[/tex].Let the coefficient in front of [tex]\text{AlCl}_3\;(aq)[/tex] be [tex]1[/tex].
[tex]\begin{array}{cccccccl}\text{Al}\;(s) & +& \text{CuCl}_2\;(aq) & \to & \text{AlCl}_3\;(aq) & + & \text{Cu}\;(s)\\ & & & & {\bf 1} & & &\begin{aligned}&\text{Assign "1" to the most}\\[-0.5em]&\text{complex compound.}\end{aligned} \\ {\bf 1}& &{\bf 3/2} & & 1 & & &\begin{aligned}&\text{Al and Cl atoms}\\[-0.5em]&\text{conserve.}\end{aligned}\end{array}[/tex][tex]\begin{array}{cccccccl}\phantom{\;\text{Al}\;(s)} & \phantom{+}& \phantom{\text{CuCl}_2\;(aq)} & \phantom{\to} & \phantom{\text{AlCl}_3\;(aq)} & \phantom{+} & \phantom{\text{Cu}\;(s)}\\[-1em]1& &{3/2} & & 1 & & {\bf 3/2} &\begin{aligned}&\text{Cu atoms shall also}\\[-0.5em]&\text{conserve.}\end{aligned} \\2& &{3} & & 2 & & {3} &\begin{aligned}&\text{Multiply all}\\[-0.5em]&\text{coefficients by two}\\[-0.5em]&\text{to eliminate fractions.}\end{aligned}\end{array}[/tex].
Hence the balanced equation:
[tex]2 \;\text{Al} \;(s) + 3 \;\text{CuCl}_2\;(aq) \to 2\;\text{AlCl}_3\;(aq) + 3\;\text{Cu}\;(s)[/tex].
Which reactant is limiting?Assume that [tex]\text{CuCl}_2[/tex] is the limiting reactant.
Formula mass of [tex]\text{CuCl}_2[/tex]:
[tex]M(\text{CuCl}_2) = 63.546 + 2 \times 35.45 = 134.446\;\text{g}\cdot\text{mol}^{-1}[/tex].
Number of moles of [tex]\text{CuCl}_2[/tex] available:
[tex]\displaystyle n = \frac{m}{M} = \frac{3.5}{134.446} = 0.0260328\;\text{mol}[/tex].
The ratio between the coefficient in front of [tex]\text{CuCl}_2[/tex] is the same as the coefficient in front of [tex]\text{Cu}[/tex].
[tex]\displaystyle \frac{n(\text{Cu})}{n(\text{CuCl}_2)} = \frac{\text{Coefficient in front of } n(\text{Cu})}{\text{Coefficient in front of } n(\text{CuCl}_2)} = \frac{3}{3} = 1[/tex].
[tex]n(\text{Cu}) = 1 \cdot n(\text{CuCl}_2) = 0.0260328\;\text{mol}[/tex].
Mass of copper that is expected to be produced if [tex]\text{CuCl}_2[/tex] is the limiting reactant:
[tex]m(\text{Cu}) = n(\text{Cu}) \cdot M(\text{Cu}) = 0.0260328 \times 63.546 =1.65\;\text{g}[/tex].
Assume that [tex]\text{Al}[/tex] is the limiting reactant.
The methods are similar. Try the steps above yourself.
Formula mass of [tex]\text{Al}[/tex]:
[tex]M(\text{CuCl}_2) = 26.982\;\text{g}\cdot\text{mol}^{-1}[/tex].
Number of moles of [tex]\text{Al}[/tex] available:
[tex]\displaystyle n = \frac{m}{M} = \frac{0.5}{26.982} = 0.0185\;\text{mol}[/tex].
The ratio between the coefficient in front of [tex]\text{CuCl}_2[/tex] is [tex]3/2[/tex] times the coefficient in front of [tex]\text{Al}[/tex].
[tex]\displaystyle \frac{n(\text{Cu})}{n(\text{Al})} = \frac{\text{Coefficient in front of } n(\text{Cu})}{\text{Coefficient in front of } n(\text{Al})} = \frac{3}{2}[/tex].
[tex]\displaystyle n(\text{Cu}) = \frac{3}{2} \cdot n(\text{Al}) = 0.0277963\;\text{mol}[/tex].
Mass of copper that is expected to be produced if [tex]\text{Al}[/tex] is the limiting reactant:
[tex]m(\text{Cu}) = n(\text{Cu}) \cdot M(\text{Cu}) = 0.0277963 \times 63.546 =1.77\;\text{g}[/tex].
[tex]1.65\;\text{g} < 1.77\;\text{g}[/tex]. The first assumption is valid. [tex]\text{CuCl}_2[/tex] will run out before all [tex]0.5\;\text{g}[/tex] of aluminum are consumed, Only [tex]1.65\;\text{g}[/tex] of copper will be produced.
what is the percent of O in CO2
72.71 . simple google search, you shouldnt waste points
For this case we have the [tex]CO_ {2}[/tex]
It is composed of one atom of carbon and two of oxygen.
The atomic mass of carbon and oxygen, which can be found in a periodic table, are given by:
[tex]C: 12 \frac {g} {mol}\\O: 16 \frac {g} {mol}[/tex]
Then, we find the atomic mass of [tex]CO_{2}[/tex]:
[tex]1 * 12 \frac {g} {mol} = 12 \frac {g} {mol}\\2 * 16 \frac {g} {mol} = 32 \frac {g} {mol}[/tex]
Adding we have:
[tex]44 \frac {g} {mol}[/tex]
To find the percentage of oxygen, we divide the atomic mass of the two oxygen atoms between that of [tex]CO_{2}:[/tex]
[tex]\frac {32} {44} * 100 = 72.73[/tex]%
Thus, the percentage of oxygen is 72.73%
Answer:
72.73%
Which law states that the volume and absolute temperature of a fixed quantity of gas are directly proportional under constant pressure conditions?
Charles’ Law........
Answer: Charles' Law
Explanation:
Charles' Law: This law states that volume is directly proportional to the temperature of the gas at constant pressure and number of moles.
[tex]V\propto T[/tex] (At constant pressure and number of moles)
[tex]{V_1\times T_1}={V_2\times T_2}[/tex]
where,
[tex]V_1[/tex] = initial volume of gas
[tex]V_2[/tex] = final volume of gas
[tex]T_1[/tex] = initial temperature of gas
[tex]T_2[/tex] = final temperature of gas
Therefore, the volume and absolute temperature of a fixed quantity of gas are directly proportional under constant pressure conditions.
The element sodium (Na) is a soft solid that will react explosively with water. The element chlorine (Cl) is a toxic gas. When these two elements combine, they produce a stable, crystalline solid known commonly as table salt (NaCl). How would you explain this?
Select one:
When substances combine to form new substances, the properties of the reactants are preserved.
When substances combine to form new substances, the properties of the resulting substances will be different than those of the reactants.
Sodium and chlorine become different elements during the reaction.
The properties of each of the two original elements are combined to give salt its properties.
Answer:
When substances combine to form new substances, the properties of the reactants are preserved.
Explanation:
When the two elements Na and Cl combine, they produce a stable, crystalline solid known commonly as table salt. This explains as when substances combine to form new substances, the properties of the reactants are preserved. Therefore, option A is correct.
What do you mean by the term element?Elements are pure substances that cannot be broken down into simpler substances by chemical means. They are made up of atoms, which have a specific number of protons in their nucleus that defines their atomic number.
In a chemical reaction, the atoms that form the first substances are regrouped into other molecules, and these new substances have various properties from those of the reactants. The total number of all types of atoms is kept, and thus the mass does not change.
Thus, option A is correct.
To learn more about the element, follow the link:
https://brainly.com/question/13025901
#SPJ3
What is the alternate form of CaF2+H2SO+157.7KJ→CaSO4+2HF
Answer:
CaF₂+H₂SO₄ → CaSO₄+2HF ΔH = +157.7KJ
Explanation:
Energy changes in chemical reactions is one of the most important issues in thermodynamics especially the enthalpy of reaction (ΔHrxn)
(ΔHrxn) can be defined as the difference between the total enthalpy of the products and the total enthalpy of the reactants of a certain reaction.If ΔH<0 for an exothermic reaction (i.e. heat flows from a system to its surroundings) or in other words, the enthalpy of the products is less than the enthalpy of the reactantsWhile, ΔH>0 for an endothermic reaction (i.e. heat flows from the surroundings to a system) that means the enthalpy of the products is greater than the enthalpy of the reactants.In this exampleCaF₂+H₂SO₄+157.7KJ → CaSO₄+2HF
heat flows from the surroundings to a system and so ΔH>0which can be expressed in alternate form as following
CaF₂+H₂SO₄ → CaSO₄+2HF ΔH = +157.7KJ
how many atoms are in 63.5 grams of Hg
Which is a characteristic of nuclear fusion?
Answer:
The correct answer is B
Explanation:
Nuclear Fusion is a raection in which two or more atomic nuclei are combined together to form a heavier nuclei.
The study of chemicals and bonds is called chemistry. The element is made of electrons, protons, and neutrons.
The correct answer is option B that is involves the collision of two nuclei.
What are nuclei?The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom.
Fusion means the joining of two-component and according to the question, the correct answer is option B.
For more information about the nuclei, refer to the link:-
https://brainly.in/question/9531558
How many grams of iron oxide would be formed if 2 moles of iron completely with oxygen gas
Answer: About 160 grams
Explanation: The formula for this reaction is 4Fe + 3O2 = 2Fe2O3. Since only 2 moles of iron are reacting then only 1 mole of the product will be produced. The molar mass of the product is about 160 grams.
how many grams of water can be produced when 8.73 moles of benzene react with excess oxygen?
Answer:
471 g
Explanation:
When 8.73 moles of benzene react with excess oxygen, approximately 471.42 grams of water will be produced.
Explanation:In order to find out how many grams of water are produced from the reaction of 8.73 moles of benzene (C6H6) with excess oxygen (O2), we need to know the balanced chemical reaction. The combustion reaction for benzene looks like this:
C6H6 + 7.5O2 -> 6CO2 + 3H2O
From the balanced combustion reaction, it can be seen that for each mole of benzene reacting, 3 moles of water are produced. So, if 8.73 moles of benzene react, it would yield 3 times this many moles of water: 8.73*3 = 26.19 moles of water.
As the molar mass of water (H2O) is approximately 18 g/mole, we can calculate grams of water by multiplying moles of water and molar mass of water.
26.19 moles * 18 g/mole = 471.42 grams of water
So, approx 471.42 grams of water can be produced when 8.73 moles of benzene react with excess oxygen.
Learn more about Molar Stoichiometry here:https://brainly.com/question/9403678
#SPJ3
Sound travels fastest through what?
A. Space
B. Cool air
C. Warm air
D. A metal spoon
A I believe is correct
Answer:
metal spoon because travels fastest through solid objects
Explanation:
Which of the following is a cause of eutrophication of a lake?
Answer:
C. Excess nutrients promote the growth of algae
Explanation:
The eutrophication can simply be explained as an over-saturation of the waters with nutrients. This usually happens because of the human activity, with the largest sources that contribute to this being the fecal matter from the farmed animals and the fertilizers used in the agriculture. They are either released into the water directly or manage to reach it on their own by natural means. Once they reach the water they increase the amount of nutrients a lot, and that prompts the growth of the algae. As the algae grow more and more and occupy more and more area, they block the sunlight, so the organisms that use photosynthesis die out. Also, the algae contribute to eliminating the oxygen of the waters, so the fish and the other organisms die out as well, leading to a total collapse of the ecosystem.
35 POINTS!!!!!!!!!!!!!!
explain the concept of conservation of natural resources
Air, soil, plants, fuels and water are examples of natural resources. Some of these (ex. air & water) are renewable. Some however are nonrenewable (ex. fuels). If not conserved and protected, we may lose some of these resources to pollution or depletion.
The Earth's natural resources include air, water, soil, minerals, fuels, plants, and animals. Conservation is the practice of caring for these resourcesso all living things can benefit from them now and in the future. ... These are renewable resources. Otherresources, such as fossil fuels, cannot be replaced at all.
Source: National Geography
USATEST PREP QUESTION HELP ! Really appreciate it !
A hurricane-hit region is isolated from the rest of the country because of flooding. The storm has also cut off the power supply and all means of communication. A newspaper wants to get pictures of the place to report the incident to the rest of the country.
How can the newspaper get a photo of the place in time for its morning edition?
A) access pictures of the area taken by satellites
B) use pictures taken previously of other flooded areas
C) send a team of photographers to get pictures of the area
D) request local newspapers in the affected area to send pictures
Answer is A Access pictures of the area taken by satelites.
Explanation: Satelites are the only thing out of these four answers that does not requir power supply from the town. Hope it helped!
The newspaper can get the pictures of the place by accessing pictures of the area taken by satellites.
Satellites use magnetic sensors to collect electromagnetic radiation of specific wavelength reflected from the Earth surface.
These sensors are able to detect wavelengths that are not possible by human eyes.
The power supply that has been cut off does not affect the satellite, hence it will detect the waves reflected from the Earth surface during the hurricane and the photo of the place can used by the newspaper for its morning edition.
Thus, the best way for the newspaper to get the pictures of the place is to access pictures of the area taken by satellites.
Learn more here:https://brainly.com/question/18657303
____________ A measurement of the amount of space an object occupies.
Volume is a measurement if the amount of space an object occupies.
How does photosynthesis use solar energy?
Answer:
Photosynthesis in plants converts solar energy into chemical energy using electrons and protons from water. The process of photosynthesis in plants involves a series of steps and reactions that use solar energy, water, and carbon dioxide to produce organic compounds and oxygen
Answer:
Solar energy is converted to chemical energy in the chemical bonds of the glucose molecule.
Explanation:
A 2.5-liter sample of a gas at 2.0 atm and 300.0 K has 0.30 mole of the gas. If 0.15 mole of the gas is added to the sample at the same temperature and pressure, what is the final volume of the gas? 3.4 liters 3.8 liters 4.2 liters 4.7 liters
Answer:
3.8 liters
Explanation:
According to Avogadro’s Law of gases
at constant temperature and pressure, the volume of all gases constitutes an equal number of molecules. In other words, the volume of any gas is directly proportional to the number of molecules of that gas.
∴ V ∝ n or (V₁/V₂) = (n₁/n₂)
V₁= 2.5 L
n₁= 0.3 mol
n₂= 0.3 mol + 0.15 mol = 0.45 mol
using cross multiplication
(2.5 L / V₂) = (0.3 mol / 0.45 mol)
V₂= 3.8 L
∴ The right choice is 3.8 liters
Answer:
3.8 liters
Explanation:
A geochemist examines a piece of metal that he found in the soil. He performs tests to identify the metal from its density, electrical conductivity, and melting point. Which statement best describes his investigation? He is determining physical properties that are sufficient to identify the metal. He is determining chemical properties that are sufficient to identify the metal. He is determining physical properties that are insufficient to identify the metal. He is determining chemical properties that are insufficient to identify the metal.
Answer:
He is determining physical properties that are sufficient to identify the metal.
Explanation:
A physical property is an aspect of matter that can be observed or measured without changing it. Examples of physical properties include color, molecular weight and volume. A chemical property may only be observed by changing the chemical identity of a substance.Density, electrical conductivity, and melting point are considered as physical properties and are sufficient to identify a metal as these properties are independent of the amount of substance being examined.These properties are known as intensive properties and are used to identify a substance by comparing the obtained values with standard values.So, the right choice is:
He is determining physical properties that are sufficient to identify the metal.
A! He is determining physical that are sufficient to identify the metal.
Which process takes place in both plant and animal cells? Conversion of solar energy Cellular respiration Formation of glucose Photosynthesis
Answer:
Cellular Respiration
Explanation:
Cellular respiration is the process that occurs in both plant and animal cells, allowing them to convert glucose into ATP, the usable form of energy for cellular functions. While photosynthesis only happens in plants, cellular respiration is essential for both plants and animals, illustrating a fundamental connection between these two types of organisms.
Explanation:The process that takes place in both plant and animal cells is cellular respiration. This is a series of metabolic pathways that extracts energy from the bonds in glucose, a sugar that's produced during photosynthesis in plants, and converts it into ATP (adenosine triphosphate), which is a form of energy that all living things can use.
Although plants are capable of photosynthesis, the process by which they convert solar energy into chemical energy (glucose), they also perform cellular respiration to break down this glucose into usable energy for cellular activities. Animals, which cannot perform photosynthesis, rely entirely on cellular respiration to convert energy from consumed food into ATP.
It's important to note that photosynthesis only occurs in photosynthetic organisms such as plants, algae, and certain bacteria, while cellular respiration occurs in virtually all living organisms. This highlights the interconnectedness of life processes, as the oxygen created as a byproduct of photosynthesis is used by animals during cellular respiration, and the carbon dioxide produced by animals during cellular respiration is utilized by plants during photosynthesis.
H2S polar or nonpolar ?
Answer:
Hydrogen sulfide is nonpolar. Even though the molecular geometry would allow for it to polar, the bonds are not polar, so the molecule isn't either. Polarity is determined by electronegativity.
[tex]H_2S[/tex] is a polar substance.
Explanation:Polar particles form when two molecules don't share electrons similarly in a covalent bond. This happens when there is a distinction between the electronegativity of every molecule. An extraordinary distinction shapes an ionic bond, while a lesser contrast frames a polar covalent bond.
If the electronegativity between the two ions is somewhere in the range of 0.5 and 2.0, the structure of the particle forms a polar covalent bond. In the event that the electronegativity distinction between the ions is more than 2.0, the bond is ionic. Ionic mixes are amazingly polar particles.
Instances of polar particles include:
Water - [tex]H_2O[/tex] Ammonia salts - [tex]NH_3[/tex] Sulfur dioxide - [tex]SO_2[/tex] Hydrogen sulfide - [tex]H_2S[/tex]step.
Apply A hydrate contains 0.050 mol of H2O for every
0.00998 mol of ionic compound. Write a generalized
formula of the hydrate.
Answer:
General formula of the hydrate XY.5H₂O
Explanation:
The general formula of a hydrate is given by; XY.nH₂O
Where n is the number of water of crystallization;
n = Moles of H₂O/Moles of XY
= 0.050 Mol/0.00998 mol
= 5.01
≈ 5
Therefore, the generalized formula of the hydrate is XY.5H₂O
The generalized formula of the hydrate can be written as [tex]\[ \text{ionic compound} \cdot 5 \text{H}_2\text{O} \][/tex]
To write the generalized formula of the hydrate, we need to represent the ratio of moles of water molecules to moles of the ionic compound in the hydrate.
Given:
[tex]Moles \ of \ water\ (H_2O) = 0.050 \ mol[/tex]
[tex]Moles\ of\ ionic\ compound = 0.00998\ mol[/tex]
The ratio of moles of water to moles of the ionic compound can be expressed as:
[tex]\[ \frac{\text{moles of water}}{\text{moles of ionic compound}} = \frac{0.050 \, \text{mol}}{0.00998 \, \text{mol}} \][/tex]
To simplify this ratio and express it as a whole number, we can multiply both the numerator and denominator by a factor that will result in whole numbers. In this case, we can multiply by [tex]1000[/tex]
[tex]\[ \frac{0.050 \, \text{mol} \times 1000}{0.00998 \, \text{mol} \times 1000} = \frac{50}{9.98} \][/tex]
This simplifies to approximately
[tex]\[ \frac{50}{9.98} = 5.01 \][/tex]
So, the ratio of moles of water to moles of the ionic compound in the hydrate is approximately [tex]\(5.01:1\)[/tex]
Where "ionic compound" represents the formula of the ionic compound present in the hydrate.
I need to get my grade up fast someone plz help with any of these
Answer:
1. the outer layer of the eye: G scelra
2. when a light ray bends, or changes direction, when it moves from one material into another: F refraction
3. an optical instrument that makes objects that are far away look closer: K telescope
4. the point where all of the beams of light leaving a lens converge: focal point
5. a term for a medium that transmits nearly all the light rays that hit it: C transparent
6. the distance between any two peaks or any two troughs of a wave: J wavelength
7. a term used to describe a person who cannot see close objects clearly: B
farsighted
8. a term used to describe a person who cannot see faraway objects clearly: M nearsighted
9. a narrow beam of light that travels in a straight line: H light ray
10. a curved, transparent object used to refract light: lens
11. a word used to describe a medium that only allows some of the light rays that hit it to pass through it: E translucent
12. the process of converting light energy into...(can't see the rest)
13. (isn't visible either)
The specific gravity of iron is 7.87, and the density of water at 4.00 ∘C is 1.00 g/cm3. You can use this information to find the density of iron.
Find the volume occupied by 7.00 g of iron.
Solution:
Density of iron( d)=?
Specific gravity of iron=7.87
Density of water at 4°C=1g/cm^3
we have,
specific gravity =density of object/density of water at 4°C
or,7.87=d/1
or, d=7.87g/cm^3
Again,
density=mass/ volume
or,7.87=7/V
or,V=7/7.87
or,V=0.88cm^3
therefore, volume occupied by iron is 0.88cm^3
I DONT UNDERSTAND!!!!
Answer:
[tex]\boxed{\text{311 K}}[/tex]
Explanation:
We can use the Ideal Gas Law and solve for T.
pV = nRT
Data:
p = 0.998 atm
V = 1.20 L
n = 0.0470 mol
R = 0.082 06 L·atm·K⁻¹mol⁻¹
Calculation:
0.998 × 1.20 = 0.0470 × 0.082 06 × T
1.198 = 0.003 857T
[tex]T = \dfrac{1.198}{0.003 857} = \textbf{311 K}[/tex]
The Kelvin temperature is [tex]\boxed{\textbf{311 K}}[/tex], not 307 K.
I suppose you could choose the last square, as it has the closest value.
A rectangular prism of volume 84 cm 3 has a mass of 760 g. What is the density of the rectangular prism? 5.8 g•cm 3 9.0 g/cm 3 68 g/cm 3 0.11 cm 3 /g
Answer:
9.0 g/cm³
Explanation:
Density can be computed with the formula:
[tex]D=\dfrac{M}{V}[/tex]
Where:
D = Density
M = Mass
V = Volume
In your problem we are given:
84 cm³ = volume
760 g = mass
So we just plug in our given into the formula:
[tex]D=\dfrac{M}{V}[/tex]
[tex]D=\dfrac{760g}{84cm^{3}}[/tex]
[tex]D=9.05g/cm^{3}[/tex]
The answer would then be:
9.0 g/cm³
Answer:
it is 9.04 or 9.0
Explanation:
What is the molar mass of Cu(OH)2
Answer:
97.54
Explanation:
Molar mas of cu (oh) 2
Cu = 63.54
O x 2 = 16 x 2 = 32
H x 2 = 1 x 2 = 2
TOTAL = 97.54
Which statement is supported by the cell theory
HURRRYYYYY
All living beings are made up of cells. or Cell is the most basic unit of life. or All cells must come from pre-existing cells.
I hoped I helped a little
Write the chemical symbols for three different atoms with 24 electrons
Answer:
Cr
Mn⁺¹
Fe⁺²
Explanation:
I tried finding the answer to this time and time again. I cannot find it. I hope someone can help me. What does photochemical smog react with?
A chemical reaction between solar ultraviolet radiation and an atmosphere polluted with hydrocarbons and oxides of nitrogen causes photochemical smog. ... Smog can happen both during the day and at night, but photochemical smog only happens in the presence of sunlight.