What must be true for diffusion of a solute to occur across a partition that separates two compartments?

Answer:

True

Explanation:

Every material in made up of intensive or extensive property. Intensive property of a system does not depend on the system size or the amount of material in the system. But extensive property on the other hand depends on the amount of material present in the system.

Examples of intensive properties include temperature, density, vapor pressure and viscosity.

Assuming that there is some residual liquid left after equilibrium is reached, no matter how much liquid is present, at any given temperature, the vapor pressure will be the same because it is an intensive property.

Answer:

A  fan is a common house appliance which is attached to the ceiling and uses an electric motor to rotate blades or paddles in a circular motion. Ceiling fans help cool a room by moving air which causes evaporative cooling. Fans range in size from 36 inches to 56 inches using 55 to 100 watts, a typical 48 inch ceiling fan will use 75 watts.

where you have

Hours Used Per Day:5

Power Use (Watts): 75

Price (kWh): 0.01

then you have

Cost Per Hour=0.0075

Cost Per Day= 0.0375

Cost Per Month=1.14

Cost Per Year=13.69

kWh Per Day: 0.38

Answer:

5W

Explanation:

Answer:

¹⁵₇N

Explanation:

Nitrogen

Element Symbol - N

Atomic Number (No of protons) = 7

Neutrons = 8

Mass Number (Protons + Neutrons) = 7 + 8 = 15

The symbol for the nitrogen isotope with 8 neutrons is N-15.

The symbol for an element represents its identity, and is composed of the element's atomic number and an elemental symbol. The atomic number represents the number of protons in the nucleus of an atom. The mass number represents the total number of protons and neutrons in the nucleus. To determine the symbol for the nitrogen isotope with 8 neutrons, we need to identify the atomic number and mass number for nitrogen. Nitrogen has an atomic number of 7, which means it has 7 protons. Since the mass number is the sum of protons and neutrons, we can subtract 8 neutrons from the mass number to find the number of protons in the isotope. Therefore, the nitrogen isotope with 8 neutrons has an atomic number of 7 and a mass number of 15. The symbol for nitrogen is N, so the symbol for the nitrogen isotope with 8 neutrons is N-15.

https://brainly.com/question/10985592

#SPJ3

Answer:

The work done on the system is 17.75_KJ

Explanation:

To solve this question we need to know the required equations from the given variables, thus

Initial volume = 85L

Final volume = 12L

External pressure = 2.4 atm.

work done = - PΔV

2.4×(85-12) = 175.2L×atm

Converting from L•atm to KJ is given by

1 L•atm = 0.1013 kJ

(175.2 L•atm) * (0.1013 kJ / 1 L•atm)

= 17.75 kJ

The work done on the system is 17.75_KJ

The work done on the system is -17.75 kJ.

Work done is obtained using the relation;

w = PΔV

where;

w = work done

V = change in volume

V1 =  85 L

V2 =  12 L

P =  2.4 atm

Hence;

w =  2.4 atm(12 - 85) L = -175.2 atm L

Now;

1 L atm = 101.325 J

-175.2 atm L = -175.2 atm L ×  101.325 J/1 L atm  = -17.75 kJ

Learn more: https://brainly.com/question/6592407

Answer:

Explanation:

In this problem, only the Kw is given and you need to figure out what the [OH-] concentration is. The only was of going such is filling in "x" for both [H+] and [OH-] due to both parts of the equation not being listed. From here, just solve for "x".

At 15°C, the equilibrium concentration of OH⁻ ions in pure water is calculated to be approximately 6.7 × 10⁻⁸ M using the square root of the given Kw value, 4.5 x 10⁻¹⁵.

In the given question, we are asked to calculate the equilibrium concentration of hydroxide ions, [OHˉ], at a temperature of 15°C where the autoionization constant of water (Kw) is given to be 4.5 × 10⁻¹⁵. We know that:

Kw = [H3O+][OHˉ].

In pure water at equilibrium, the concentration of H3O+ equals the concentration of OHˉ. Hence, we can rewrite the expression as:

Kw = [OHˉ]² or [OHˉ] = √Kw.

Substituting Kw with 4.5 × 10⁻¹⁵, we find:

[OHˉ] = √(4.5 × 10⁻¹⁵) = 6.7 × 10⁻⁸ M

This means, at 15°C, the equilibrium concentration of OHˉ is 6.7 × 10⁻⁸ M.

https://brainly.com/question/14663830

SPJ3

Answer:

The correct option is  2.No, because only electrons are involved in bonding.

Explanation:

The type of bond formed by carbon and nitrogen (carbon-nitrogen bond) is covalent bond

Also known as molecular bond, a covalent bond involves the sharing of pairs of electrons (known as bonding pairs or shared pairs) between the carbon and nitrogen atoms forming stable, balanced forces in attraction and repulsion as they share common electrons in their compounds.

This electron sharing covalent bond is what enables the formation of the several compounds between carbon and nitrogen for example, in an amine, nitrogen which has five electrons, has two remaining electrons that forms a lone pair whereby it can combine further with other elements.

Hence the factor that influences the bonds to make the numerous organic molecules is the available electrons which constitutes the shared electron pairs in covalent bonds while the neutrons which function is to keep the repulsive forces of positively charged protons from ripping the nucleus apart.

Answer:

They experience the same pressure

Explanation:

To answer this question, we recall Pascal's, Law Pascal's law states that  an increase in pressure at a point in a confined cylinder containing a fluid, there is also an equal increase at all other points in that cylinder.

According to Pascal's law the pressure if the pressure expereienced by the larger diameter piston increases, the pressure experienced by the smaller diameter piston also increases by the same amount

However considering that pressure = Force/area F1/A1 =F2/A2

thus where A1 = πD²÷4 and A2 = πD²÷ 16 we have

we have F1×4/πD² = F2×16/πD² or F1 = 4× F2

They experience the same pressure but the larger cylinder delivers four times the force transmitted from he outside to the smaller cylinder

An aqueous mixture containing starch (a colloid), NaCl, glucose, and albumin (a colloid) is placed in a dialyzing bag and immersed in distilled water. Which of the following correctly describes the location of the indicated substance after dialysis?

A-albumin, inside

B-starch outside

C-albumin inside and outside

D-water inside only

E-starch inside and outside

Answer: A Correct

Explanation: A dialyzing bag is a visking device i.e. artificial semi-permeable membrane tubing used for a differential molecular movement across to the medium/cell membrane (separation techniques), that allows the flow of smaller molecules (low-molecular-weight molecules) in solution on the basis of differential diffusion.

Tiny molecules like water and glucose can pass through its microscopic pores while larger molecules like salt ions of NaCl, albumin, sucrose and starch cannot pass through the pore.

So, the salt ions of NaCl, albumin, sucrose and starch stays inside the bag, only glucose can go out of the bag and water may also diffuse into the bag from outside .

After dialysis, starch will be found outside the bag, while glucose, albumin, and NaCl will be found inside the bag.

An aqueous mixture containing starch (a colloid), NaCl, glucose, and albumin (a colloid) is placed in a dialyzing bag and in distilled water. After dialysis, the starch will be found outside the bag, while the glucose, albumin, and NaCl will be found inside the bag. The starch particles are too large to pass through the semi-permeable dialyzing membrane, so they remain outside the bag, while the smaller glucose, albumin, and NaCl molecules are able to pass through the membrane and are found inside the bag.

https://brainly.com/question/16026206

#SPJ3

Answer:

Charge-charge interactions (salt bridge, ionic bond) are electrostatic interactions between a pair of ions is True.

Explanation:

Electrostatic interaction between pairs of ions involves the transfer of ion/charges from two bonding elements in their ionic state

Final answer:

After calculating the heat released by the condensation of water and equating it to the heat absorbed by the aluminum block, the final temperature of the aluminum block is found to be approximately 25.2°C.

Explanation:

The question asks us to determine the final temperature of an aluminum block after heat transfer occurs due to condensation of water on its surface. Both the water and the aluminum block initially have the same temperature of 25°C. We can use the concept of thermal equilibrium and specific heat capacity to solve this problem.

The heat released during the condensation of water (Qwater) is used to increase the temperature of the aluminum block (Qaluminum). According to the principle of conservation of energy, Qwater = Qaluminum.

We can calculate Qwater using the latent heat of condensation for water, which is 2260 J/g. Since 0.48 g of water condenses:
Qwater = mass × latent heat = 0.48 g  2260 J/g = 1084.8 J

Next, we calculate the change in temperature of the aluminum block using its specific heat capacity (900 J/kg•K), which allows us to find the final temperature:
Qaluminum = mass × specific heat capacity × change in temperature
1084.8 J = 0.055 kg × 900 J/kg•K × (final temperature - initial temperature)

Now, isolating the final temperature, we can solve for it:

final temperature = (1084.8 J / (0.055 kg × 900 J/kg•K)) + 25°C
final temperature = 25.2°C

Thus, the final temperature of the aluminum block, after absorbing the heat from the condensation of water, is approximately 25.2°C.

Answer:

[tex]V_f=V_2=1.22\times 10^{-3} L=1.22mL[/tex]

Explanation:

Use Charles's law which states: "At constant pressure, the volume occupied by a gas sample is directly proportional to the absolute temperatures they support."

This law can be expressed mathematically as follows:

[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]

Where:

[tex]V_1=Initial\hspace{3}volume=1.64mL=1.64\times 10^{-3} L\\V_2=Final\hspace{3}volume\\T_1=Initial\hspace{3}temperature=94.6$^{\circ}$C=367.75K\\T_2=Final\hspace{3}temperature=0.3$^{\circ}$C=273.45K[/tex]

Solving for [tex]V_2[/tex]

[tex]V_2=\frac{V_1*T_2}{T_1} =\frac{(1.64\times 10^{-3} )*273.45}{367.75} =1.21946431\times 10^{-3} \approx1.22\times 10^{-3} L =1.22mL[/tex]

Answer:

[CaCl₂] = 1.32 M

Explanation:

We know the volume of solution → 0.30 L

We know the mass of solute → 44 g of CaCl₂

Let's convert the mass of solute to moles.

44 g . 1 mol / 110.98 g = 0.396 moles

Molarity (mol/L) → 0.396 mol / 0.3 L  = 1.32 M

Final answer:

To arrange the solutions in order of increasing acidity, we must understand their hydrolysis reactions. The order from least acidic to most acidic is: CH3COONa, NaF, NaNO3, CH3COONH4, NH4NO3.

Explanation:

To arrange the 0.10 M solutions in order of increasing acidity, we need to consider the nature of each compound in water and the consequent effect on pH. Salt solutions can be acidic, neutral, or basic, depending on the ions they release into solution.

(i) NH4NO3: This salt forms from a weak base (NH4OH) and a strong acid (HNO3), so its solution is acidic because the NH4+ ion hydrolyzes to produce acid.

(ii) NaNO3: Na+ is from a strong base (NaOH), and NO3- is from a strong acid (HNO3), so the solution is neutral as neither ion hydrolyzes significantly.

(iii) CH3COONH4: This is a salt of a weak acid (CH3COOH) and a weak base (NH4OH), but since weak bases generally hydrolyze more compared to weak acids, this solution is slightly acidic.

(iv) NaF: This salt dissociates into Na+ (from NaOH, a strong base) and F- (from HF, a weak acid). The F- ion hydrolyzes water to form HF and OH-, making the solution basic.

In summary, the order of increasing acidity (from least acidic to most acidic) is: CH3COONa < NaF < NaNO3 < CH3COONH4 < NH4NO3.

Final answer:

The empirical formula for this compound is CH₂O.

Explanation:

To find the empirical formula of a compound with given mass percentages, we first assume a sample size of 100 grams. This makes it easy to convert mass percent to grams directly. For the compound containing 40.0% C, 6.71% H, and 53.28% O, we would have 40.0 grams of carbon, 6.71 grams of hydrogen, and 53.28 grams of oxygen.

Next, we convert these masses to moles using the molar mass of each element (Carbon: 12.01 g/mol, Hydrogen: 1.008 g/mol, Oxygen: 16.00 g/mol).

To determine the simplest integer ratio of the elements, divide the moles of each element by the smallest number of moles calculated. In this case, all values come down to 1, which gives us the simple ratio of 1:2:1. Thus, the empirical formula is CH₂O.

Answer:

The answer is A.  a north, B south and C south

Explanation:

i just took the test

Answer:

A

Explanation:

USATestprep

The number of moles in each compound is:

What is Avogadro's number?

It is the number of atoms or molecules in one mole of a substance, equal to 6.023 × 10²³.

We want to convert molecules to moles, so Avogadro's number will be the conversion factor.

The number of moles in each compound is:

Learn more about Avogadro's number here: https://brainly.com/question/8946174

Final answer:

To find the moles for CO2, H2O, and C6H12O6, we divide the number of molecules by Avogadro's number, yielding 4.09 × 10^-3 mol for CO2, 1.66 × 10^-20 mol for H2O, and 1.45 × 10^9 mol for C6H12O6.

Explanation:

To calculate the number of moles of each compound given the number of molecules, we will use Avogadro's number (6.022 × 10^23), which represents the number of particles in one mole of a substance. The formula to convert molecules to moles is:

Number of moles = (Number of molecules) / (Avogadro's number)

For CO2 (carbon dioxide):

Number of moles = (2.46 × 10^21 molecules) / (6.022 × 10^23 molecules/mol) ≈ 4.09 × 10^-3 mol

For H2O (water):

Number of moles = (10,000 molecules) / (6.022 × 10^23 molecules/mol) ≈ 1.66 × 10^-20 mol

For C6H12O6 (glucose):

Number of moles = (8.75 × 10^32 molecules) / (6.022 × 10^23 molecules/mol) ≈ 1.45 × 10^9 mol

Answer:

K.E. increase by 10 KJ.

Explanation:

Total mechanical energy of a system is always constant which is the sum of kinetic and potential energies of the system. So, when the ram of a pile driver when it suddenly undergoes a 10 kJ decrease in potential energy, its kinetic energy must have increase by 10 KJ. So, as to make their sum constant again.

Mechanical energy = Kinetic energy + potential energy = constant

The current model of the atom was established by Rutherford's gold foil experiment. This experiment proved that atoms are mostly empty space with a small, dense nucleus, replacing Thomson's plum pudding model.

The current model of the atom in which essentially all of an atom's mass is contained in a very small nucleus, whereas most of an atom's volume is due to the space in which the atom's electrons move, was established by B) Rutherford's gold foil experiment. In this experiment, Rutherford observed that most of the alpha particles passed straight through the gold foil which indicated that atoms are mostly empty space with a small, dense nucleus. This model replaced the previously accepted Thomson's plum pudding model. Thus, the structure of the atom as we know it today, was primarily established through Rutherford's experiment.

https://brainly.com/question/31643052

#SPJ3

Answer:

K2X

Explanation:

Valency can be defined as the combining power of an element. It is the valency that dictates the value an element will have when writing a chemical formula for its compound.

MgX is a compound of magnesium and an element X. The valency of magnesium in most of its compound is +2. Now for the 2 to have been absent in the chemical formula, this shows that the element X itself have a valency if -2 for the valencies of both to have canceled out.

Now considering the element potassium, it is an alkaline metal belonging to group 1 of the periodic table. Hence, it is expected that it has a valency of +1

Forming a compound with element X means there would be an exchange of valencies between the two. We have established that x has a valency of -2. The formula of the compound thus formed by exchanging the valencies of both element would be K2X

The most likely formula for the compound formed between potassium and element X would be [tex]K_2X[/tex].

Magnesium reacts with X to form MgX.

Magnesium has 2 valence electrons ([tex]Mg^2^+[/tex]), in order to form MgX with the element X, it means X must have the capacity to accept the 2 valence electrons from Mg. Thus, X would carry a deficit of 2 electrons in its valence shell ([tex]X^2^-[/tex]).

Potassium has one valence electron ([tex]K^+[/tex]). In order for [tex]X^2^-[/tex] to react with potassium, 2 atoms of potassium would be needed to donate their electrons each to [tex]X^2^-[/tex] in order for X to become stable. Thus

2[tex]K^+[/tex] + [tex]X^2^-[/tex] ---> [tex]K_2X[/tex]

More on forming compounds from atoms can be found here: https://brainly.com/question/1285376

Answer: ionization

Explanation:

is the minimum amount of energy required to remove the most loosely bound electron of an isolated neutral gaseous atom or molecule

Ionic bonding is the process of an atom giving up or gaining one or more electrons through its interactions with other atoms. It involves the transfer of electrons between atoms to form ions and create an ionic bond.

Ionic bonding is the process of an atom giving up or gaining one or more electrons through its interactions with other atoms.

During this process, atoms with fewer electrons in their outermost energy level, known as valence electrons, tend to give up those electrons and become positively charged ions. Atoms with more valence electrons tend to gain electrons and become negatively charged ions. This transfer of electrons creates an electrostatic attraction between the positive and negative ions, resulting in the formation of an ionic bond.

For example, in the compound sodium chloride (NaCl), sodium loses one electron to become a positively charged ion (Na+) and chlorine gains that electron to become a negatively charged ion (Cl-). The positively charged sodium ion and the negatively charged chloride ion are then attracted to each other, forming an ionic bond.

https://brainly.com/question/18297125

#SPJ3

Answer:

ΔH = + 116 kJ

Explanation:

The equation for the reaction is given as;

HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)                    ΔH = - 58 kJ

If we multiply the above equation all through with (2); we have:

2 × (HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)             ΔH = - 58 kJ)

2HCl(aq) + 2NaOH(aq)  → 2NaCl(aq) + 2H2O(l)          ΔH = - 116 kJ

If we tend to reverse the above equation; we have

2NaCl(aq) + 2H2O(l)  →  2HCl(aq) + 2NaOH(aq)         ΔH = + 116 kJ

∴ The reaction is said to be endothermin , as 116 kJ are absorbed.

The enthalpy change for the given reaction can be used to determine the enthalpy change for a related reaction by using the additive property.

The enthalpy change (ΔH) for a chemical reaction is a measure of the heat energy transferred during the reaction. In this case, the enthalpy change for the given reaction is -58 kJ. To find the enthalpy change for the reaction 2NaCl(aq) + 2H2O(l) → 2HCl(aq) + 2NaOH(aq), we can use the fact that the enthalpy change is additive. Since the reaction is being doubled, the enthalpy change will also be doubled. Therefore, the enthalpy change for this reaction would be -116 kJ.

https://brainly.com/question/32882904

#SPJ3

Answer:

II) This is because Fe₂O₃ is reduced to Fe and CO is oxidized to CO₂

Explanation:

The equation II which is Fe₂O₃ + 3CO → 2Fe + 3CO₂ is the only exclusive oxidation-reduction reaction since, Fe₂O₃ is reduced to Fe by the removal of oxygen and CO is oxidized to CO₂ by the addition of oxygen.

Equation I is a hydrolysis reaction while equation III is an acid-base reaction. There is change of oxidation number in equations I and III, but they are not exclusively oxidation-reduction reactions.  

The only oxidation-reduction reaction among the given reactions is option ll) Fe₂O₃ + 3 CO → 2 Fe + 3 CO₂

To determine which among the given reactions are redox reactions, we need to check if there is a change in oxidation states of the elements involved in the reactions.

Let's analyze each reaction:

PCl₃ + 3 H₂O → 3 HCl + H₃PO₃:

Fe₂O₃ + 3 CO → 2 Fe + 3 CO₂:

CaCO₃ + 2 HNO₃ → Ca(NO₃)₂ + CO₂ + H₂O:

Hence, the only oxidation-reduction reaction is:

Answer: Option D

They should determine the average mass of the tomato plants along with the mass of the hornworms

Explanation:

Determining the average mass of the tomato along with the mass of hornworms will tell the researcher whether the hornworms is still feeding on the tomato or not.

If the mass of the tomato is reducing, then the researcher would know that the acid is not effective in keeping the hornworms away from the tomato or otherwise.

Critical Point

I took the test

Explanation:

The given reaction equation is as follows.

         [tex]BaSO_{4}(s) \rightleftharpoons Ba^{2+}(aq) + SO_{4}^{2-}(aq)[/tex]

The value of [tex]\Delta G^{o}[/tex] = 59.1 kJ/mol

We know that ,

            [tex]\Delta G^{o} = -RT ln K_{sp}[/tex]

 or,       [tex]ln K_{sp} = -(\frac{\Delta G^{o}}{RT}) [/tex]

                       = -(\frac{59.1 kJ/mol}{(8.314 \times 10^{-3} kJ/mol.K \times 310 K))}[/tex]  

            = -22.93

or,      [tex]K_{sp} = e^{-22.93}[/tex]

                      = [tex]1.1 \times 10^{-10}[/tex]

      [tex]K_{sp} = [Ba^{2+}][ SO_{4}^{2-}][/tex]

Therefore,      [tex][Ba^{2+}] =\sqrt{K_{sp}}[/tex]

                                        = [tex]\sqrt{ 1.1 \times 10^{-10}}[/tex]

                                         = [tex]1.05 \times 10^{-5} M[/tex]

Therefore, we can conclude that the value of [tex][Ba^{2+}][/tex] in the intestinal tract is [tex]1.05 \times 10^{-5} M[/tex].

The concentration of Ba2+ (barium ions) in the intestinal tract following the ingestion of BaSO4 slurry can be calculated using the equilibrium constant (K) derived from the Gibbs free energy equation. After performing the calculations, [Ba2+] is found to be 3.45 x 10⁻⁶ M.

The question is essentially asking for the concentration of Ba2+ ions in the intestinal tract following the ingestion of BaSO4 slurry, given a ΔG° value of 59.1 kJ/mol at 37°C. In order to solve this, we need to consider the process of the reaction: BaSO4(s) ⇌ Ba2+(aq) + SO42−(aq). From the Gibbs free energy equation, we can calculate the equilibrium constant (K) as: K = e^(-ΔG°/RT), where R is the gas constant (R = 8.314 J/molK) and T is the temperature in Kelvin (37°C = 310K).

Therefore, ΔG° = -RTlnK -> K=e^(-ΔG°/RT). We find K = e^(-(−59.1×10³J mol⁻¹)/((8.314 J K⁻¹ mol⁻¹)(310 K))), which gives K = 1.19 x 10⁻¹⁰. Since the equilibrium involves the dissolution of one BaSO4 molecule to give one Ba2+ ion and one SO42- ion, the equilibrium concentrations of Ba2+ and SO42- are equal. Hence, [Ba2+] = sqrt(K) = sqrt(1.19 x 10⁻¹⁰) = 3.45 x  10⁻⁶ M.

In conclusion, the concentration of Barium ions, Ba2+, in the intestinal tract following ingestion of BaSO4 slurry would be around 3.45 x  10⁻⁶M.

https://brainly.com/question/32261464

#SPJ3

Answer:

1. The reactants are HCl and Na2S

2. The products are H2S and NaCl

3. The balance equation is given below:

2HCl + Na2S —> H2S + 2NaCl

Answer: d) 67.7KJ

Explanation:

Number of moles of Benzene= 125/78.11=1.60 moles

Q = mc◇T = 125× 1.60×(425-353)= 9540J

Q= ◇Hvap× 1.60=

33.9 × 1.60 = 54.24KJ

Q = mc◇T= 125 × 1.73× (353-335)=3803KJ

Total energy required to remove Carbon= (9540 + 54240+ 3893) J =67,673J =67

7KJ

Answer:

option a

Explanation:

Lineweaver–Burk plot also known as double displacement plot is used for the study of enzyme kinetics.  

It is reciprocal of Michaelis-Menten equation. The Michaelis-Menten equation for enzyme catalysis is as follows:

[tex]V=\frac{V_{max} [S]}{K_m+[S]}[/tex]

Take the reciprocal

[tex]\frac{1}{V} =\frac{K_m+[S]}{V_{max}[S]} =\frac{K_m}{V_{max}} \frac{1}{[S]} +\frac{1}{V_{max}}[/tex]

The plot or graph between 1/V and 1/[S] is called Lineweaver–Burk plot.

Slope of the plot is [tex]\frac{K_m}{V_{max}}[/tex].  

Intercept of y-axis is .

Intercept of x-axis is [tex]-\frac{1}{K_m}[/tex]

Therefore, by taking the reciprocal of intercept of x-axis and multiplying by -1, Km value can be determined.

Therefore, the correct option is a.

To determine Km from a Lineweaver-Burk plot, multiply the reciprocal of the x-axis intercept by -1.

To determine the Michaelis constant (Km) from a double-reciprocal plot or Lineweaver-Burk plot, you need to focus on the x-axis intercept. According to the Lineweaver-Burk equation:

1/V0 = (Km/Vmax)(1/[S]) + (1/Vmax)

Where V0 is the initial velocity, Vmax is the maximum velocity, [S] is the substrate concentration, and Km is the Michaelis-Menten constant.

To find Km, you should take the reciprocal of the x-axis intercept and multiply it by -1. This is because the x-axis intercept represents -1/Km in the Lineweaver-Burk plot. Therefore, the correct answer is:

Explanation:

Evaporation

It is the process of converting liquid into vapors .

Condensation

It is the process of converting  vapors back into liquid state .

It is seen that  a equilibrium is reached when "rate of evaporation becomes equal to rate of condensation ".

Answer:

m = 39834.3 g

Explanation:

Given data:

Mass of water raised = ?

Initial temperature = 25°C

Final temperature = 37°C

Energy added = 2000 Kj (2000 ×1000= 2000,000 j

Solution:

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT = T2 - T1

ΔT =  37°C - 25°C

ΔT = 12°C

c = 4.184 g/j.°C

Q = m.c. ΔT

2000,000j = m .4.184 g/j.°C. 12°C

2000,000j = m. 50.208 g/j

m =  2000,000j / 50.208 g/j

m = 39834.3 g