what is biasing and doping

The spacecraft's weight would be the greatest on Earth, where the strength of gravity is the highest.

The weight of an object is the force of gravity acting on it. Because Mars has less gravity than Earth, an object's weight on Mars would be less than its weight on Earth. As a result, the spacecraft's weight would be greatest on Earth, where gravity is strongest.

An item carried to Mars would weigh around 38% of its weight on Earth, according to. As a result, if the spacecraft weighs 1000 kg on Earth, it will only weigh 380 kg on Mars.

Thus, the weight of the spaceship would be greatest on Earth, where gravity is strongest.

For more details regarding gravity, visit:

https://brainly.com/question/31321801

#SPJ2

Answer:amplitude

Explanation:

Answer:

[(a=58)(b=16)] is the homogeneous mixture

The speed of a car is 58 km/h and 16.11 m/s.

                Speed S = D / T

                        ∴  S = 348/6

                        ∴  S = 58 km/h

                       So , speed S =( 348 x 5 ) / ( 6 x 18 )

                                      ∴  S = 16.11 m/s.

Thus, The speed of a car is 58 km/h and 16.11 m/s.

Learn more about Speed here -

https://brainly.com/question/13943409

#SPJ2

Answer:

C. Theories

Explanation:

Theories basically explain why of research findings. By definition, theories help us understand, explain, and predict the occurrence of a phenomena. In research, theories support research findings by explaining how the variables involved influence each other not merely based on observation during this one experiment. It also helps validate the findings by relating it to theories of previous work.

Answer:

The answer is theory. Hope that's the right answer

Answer: theory.

Explanation:

A scientific theory is the detailed explanation for the cause of the natural process, or natural event or natural phenomena. The explanation is based upon detailed experimental trials and direct observation.

The Charles Darwin "On the Origin of Species" is the theory which is considered as the foundation of evolutionary biology.

Answer:

18

Explanation:

Answer:

Water is very different from honey, syrup, glycerine, or oil. It pours easily and is not thick and sticky like the others. The property that determines how easily a liquid pours is called VISCOSITY. Water has a low viscosity; syrup has a high viscosity. Liquids with a high viscosity are said to be viscous.

The cold syrup flows sluggishly because syrup has a high viscosity.

Hence, cold syrup flows sluggishly because of its high viscosity.

To learn more about viscosity, refer to: https://brainly.com/question/11380846

#SPJ2

Answer:

B

Explanation:

Since battery acid is an acid, it can be neutralised as all acid can be neutralised.

The battery acid can be easily neutralized, and therefore the statement that it cannot be neutralized is false statement.

Answer: Option B

Explanation:

The battery acid has acidic pH that is less than 7 pH but are actually weak acids and so they have pH around 6 or 7. In order to neutralize the acid, pH is to be raised achieving the neutral pH which is 7.

This can be done using the baking soda. Baking soda has alkaline property thereby, addition of baking soda will result into neutralization reaction, causing the battery acid to neutralize.

true should be right if it is

True, More light is transmitted through a translucent material than through an opaque material.

Answer: A

Explanation

Depending on the ability to pass the light through the body, materials can be classified into transparent material, translucent material and opaque material.

Transparent materials are those that are able to pass most of the light hitting it. Examples are water, glass etc.

Translucent materials are able to pass some portion of light through them. Example - plastic.

Opaque materials are those in which light will not pass through. Majority of the light is reflected or absorbed. Example- wood.

Answer:

The answer is: John Dalton

John Dalton considered the father of atomic theory

Hope this helped :) <3

Explanation:

That was pretty clever, how you neatly and cleanly cut off the part of the photo that shows the formula we're supposed to use.

At time=0, the position is zero, and at time=5 sec, the position is 20 m.

Slope = (change in position)/(change in time)

Slope = (20m - 0m) / (5s - 0s)

Slope = (20m) / (5s)

Slope = 4 m/s

Answer:

4

Explanation:

4.3A.

The easiest way to solve this problem is find the equivalent resistance for parallel resistor 1/Req = 1/R1 + 1/R2 + 1/R3 in the three-branch parallel network with branches whose resistance are 8Ω.

1/Req = 1/8 Ω + 1/8 Ω + 1/8 Ω

1/Req = 3/8 Ω

Req = 8/3 Ω = 2.667Ω

Req = 2.7Ω

So, the equivalent circuit will be the 20.0V battery in series with a resistor  2.0Ω and the equivalent resistor 2.7Ω.

Using Ohm's Law to find the current provide by the 20.0V voltage source:

V = I*R ------> I = V/R

I = 20.0V/(2.0Ω + 2.7Ω)

I = 20.0V/4.7Ω

I = 4.3A

Answer:

Radio waves heading upward from Earth often bounce off the thermosphere-D.

With height in the thermosphere, temperature increases quickly. This layer includes the ionosphere. This layer aids in radio transmission and is really responsible for the earth's own reflection of radio waves. Thus, option D is correct.

A large percentage of the free electrons in the ionosphere affect radio propagation. High-frequency (HF) radio waves induce oscillations in the free electrons of the ionosphere, which result in energy radiation back down at the same frequency. The radio wave is essentially returned to Earth in this way.

Some of the radio waves that travel from space to Earth's atmosphere are absorbed by the electrons in the ionosphere, but other waves pass through and can be seen by observers on the ground.

Therefore, radio waves heading upward from Earth often bounce off the thermosphere.

Learn more about radio waves here:

https://brainly.com/question/21995826

#SPJ5

The answer is 25% because 50,000 is 25% of 200,000

The efficiency of a car's engine when given the heat input and waste heat is 50%.

The efficiency of a car's engine can be calculated using the formula:

Efficiency = (Useful Output Energy / Input Energy) x 100%

In this case, the heat input is 200,000 joules and the waste heat is 150,000 joules. Therefore, the efficiency can be calculated as:

Efficiency = (200,000 - 150,000) / 200,000 x 100% = 50%

So, the correct answer is not provided in the options. The efficiency of the car's engine is 50%.

https://brainly.com/question/32079707

#SPJ3

Calculate the strength of the magnetic field at point B based on given data.

The strength of the magnetic field at B can be calculated using the inverse square law formula:

BB = BA * (dA/dB)2

Given BA = 5 units and dA = 1 unit, if dB = 3 units then BB = 5 * (1/3)2 = 5/9 = 0.56 units.

Therefore, the strength of the magnetic field at B is approximately 0.56 units.

Answer:

0 newtons

Explanation:

F =MA

because constant motion means 0 acceleration.no changein velocity

F  = 5 x 0m/s²

F = 0

HOPE THIS HELPS THX

Answer: The amount of force that is required to keep the object in motion is 0 N

Explanation:

Force is defined as the push or pull on an object with some mass that causes change in its velocity.

It is also defined as the mass multiplied by the acceleration of the object.

Mathematically,

[tex]F=ma[/tex]

where,

F = force exerted on the object  

m = mass of the object = 5 kg

a = acceleration of the object = [tex]0m/s^2[/tex]   (Speed is constant)

Putting values in above equation, we get:

[tex]F=5kg\times 0m/s^2\\\\F=0N[/tex]

Hence, the amount of force that is required to keep the object in motion is 0 N

Hello There!

The type of bond that is found between the atoms of a molecule is called "COVALENT" bond.

A covalent bond is where two atoms share a pair of electrons.

The bond between the atoms of molecule is Covalent bond.

Answer: Option C

Explanation:

Covalent bond due to its phenomenal activity is also known as molecular bond. The electron pairs are shared between the atoms, these shared electron pairs are known as "shared pairs or bonding pairs".

This type of covalent bonding establishes balance between the atoms against attractive and repulsive forces.  Covalent bonds are more common than ionic bonds.

Answer:

if it is slowing down than it is gaining potential energy

Explanation:

The true statement about waves is that both transverse and longitudinal waves can travel through water. Transverse waves oscillate perpendicularly to the wave direction, while longitudinal waves oscillate parallel to the wave direction.

The question pertains to the characteristics of different types of waves. A true statement about waves needs to accurately describe the motion of particles relative to the direction of the wave's travel.

Statement B: 'Both transverse and longitudinal waves can travel through water'. This is a true statement. Water waves are actually a combination of transverse and longitudinal waves, where the particles in water move in circular paths.

Transverse waves involve oscillations that are perpendicular to the direction the wave travels. Longitudinal waves, on the other hand, involve oscillations that are parallel to the direction of wave propagation.

Answer: D

Explanation:

Option(D) is the two resistors connected in parallel.

A circuit exists simply a closed loop through which charges can continuously move. To establish that charges exist not only moving through the light bulb filament but also through the wires connecting the battery pack and the light bulb, a variation on the above activity exists completed.

A resistor exists as an electrical component that limits or restrains the flow of electrical current in an electronic circuit. Resistors can even be utilized to furnish a specific voltage for an active device such as a transistor.

A resistor exists as a passive two-terminal electrical element that implements electrical resistance as a circuit element. In electronic circuits, resistors exist used to reduce current flow, adjust signal levels, separate voltages, bias active elements, and terminate transmission lines, among other uses.

Resistors exist in parallel if their terminals are connected to identical two nodes. The equivalent overall resistance exists smaller than the smallest parallel resistor.

Here from the given options Option(D) is the  two resistors connected in parallel.

It is shown below (option d).

To learn more about Resistor refer to:

https://brainly.com/question/13502585

#SPJ2

Interference is the phenomenon that can be explained by both the particle and wave models of light. It occurs when waves or particles overlap and interact.

The phenomenon that can be explained by both the particle and wave models of light is Interference (4). In the case of wave model, interference happens when two or more waves overlap together and the resulting electric field at that location is the vector sum of the fields due to the individual waves. In the case of particle model, when light acts as a particle, the individual light particles called photons interfere or interact with each other causing the Interference phenomenon.

https://brainly.com/question/23245030

#SPJ12

Both diffraction and interference can be explained by both the particle and wave models of light.

Particle and Wave Models of Light:

The phenomenon that can be explained by both the particle and wave models of light is diffraction. Diffraction occurs when light waves encounter obstacles or openings that are about the same size as the wavelength of the light. It causes the light to spread out and bend around the edges of the obstacle or opening.

Interference is another phenomenon that can be explained by both the particle and wave models of light. It occurs when two or more light waves combine and their amplitudes either reinforce or cancel each other out, resulting in areas of increased or decreased brightness.

The photoelectric effect can be explained by the particle model of light, where light is treated as a stream of particles called photons. The photoelectric effect occurs when light shines on a metal surface, causing the ejection of electrons from the atoms of the metal.

Reflection can also be explained by the wave model of light. When light waves encounter a boundary between two different media, some of the light is reflected back.

https://brainly.com/question/19149050

#SPJ12

Answer:

The Constant is the amount of water and the light intensity.

Explanation:

Answer: The constant of her experiment is water and sunlight which are necessary for photosynthesis, both factor are common to both plants

Explanation:

Answer:

b

Explanation:

Then the mass of the gas divided by the moles will give the molar mass. Now divide g by mol to get the molar mass. Since N has a molar mass of 14 g/mol and O has a molar mass of 16 g/mol, the formula N2O would produce the correct molar mass.

Answer:

b. the rate at which charge moves through each

Explanation:

When two resistors are connected in series, they are connected in the same branch of the circuit.

This means that the current flowing through each resistor is the same.

However, current is defined as the rate at which charges move:

[tex]I=\frac{q}{\Delta t}[/tex]

where q is the amount of charge that flows through a given point in a time interval [tex]\Delta t[/tex].

Therefore, the correct answer is

b. the rate at which charge moves through each

Answer:

b. the rate at which charge moves through each

Explanation:

Answer:

230 kJ

Explanation:

The amount of heat needed to melt a substance at its melting point is:

[tex]Q=m\lambda_f[/tex]

where

m is the mass of the substance

[tex]\lambda_f[/tex] is the latent heat of fusion of the substance

In this problem,

m = 10.0 kg is the mass of the lead sample

[tex]\lambda_f = 23 kJ/kg[/tex] is the latent heat of fusion of lead

Substituting,

[tex]Q=(10.0 kg)(23 kJ/kg)=230 kJ[/tex]

Answer:

Q = 230 kJ

Explanation:

Heat required to melt a given matter at its melting point is given by latent heat of fusion

It will remain constant for a given metal

for lead the latent heat of fusion is given as

[tex]L = 23 kJ/kg[/tex]

now we know that

[tex]Q = mL[/tex]

here m = 10 kg

so heat required to melt 10 kg of lead is given as

[tex]Q = 10 \times 23[/tex]

[tex]Q = 230 kJ[/tex]

Answer:

Heat

It can burn things

Answer:

When the water flows in the dam or reservoir is not restricted or is impossible to restrict due to flood, earth quake or some other natural calamity, life is endangered both to human beings and animals as the water may pass through the forests and may even enter the cities and residential area when the limit is reached and the dam overflows.

Dam plays an vital roles on drinking water supply, flood control, electricity generation, fishing, tourism, etc. The creation of storage and head allow dams to generate electricity. Another situation is when the construction of the dam collapses due to structural failure or leaks.

Answer:

id say B, but not sure

Explanation:

Answer: B-After new hypotheses related to the theory are tested in experiments.

Explanation:

A scientific theory can be define as a proposed explanation for a natural event or phenomena that is obtain after repeated experimental procedures. A scientific theory can be changed or amendments can be done in it's content with new discoveries and related evidences.

The implementation of the new technology can reduce the time to conduct the experiments and will also improve the accuracy. Therefore, a new hypothesis can be generated on the basis of the pre-proposed theory by utilizing the new technology.

Answer:

The answer is 18 N.

Explanation:

A force can be divided into components x and y components. The component along the x-axis is called the horizontal component and along the y-axis is called the vertical component. In this case, as the force is in a horizontal direction and is also known as x-component of force. The x- component of force is  

Fx = Fcosθ

Fx = 22(cos 35°)

Fx = 22 x 0.819

Fx =  18 N

Child's horizontal pull forces are equal to that of frictional resistance force on the wagon.

The force of friction on the wagon is 18 newtons, balanced by the child's horizontal force component.

To determine the magnitude of the force of friction on the wagon, we need to analyze the forces acting on the system. Because the wagon moves at a constant velocity, the net force acting on it must be zero according to Newton's First Law.

The child applies a net force of 22 newtons at an angle of 35 degrees to the horizontal. We can break this force into horizontal and vertical components:

Calculating the components, we get:

Since the wagon is moving at a constant velocity, the horizontal force exerted by the child (F_horizontal) must be balanced by the force of friction (f_friction).

Therefore, the magnitude of the force of friction on the wagon is 18 newtons.

C. 50Hz. The wavelength of a wave on a string is 1.2m with a speed of 60m/s its frecueny is 50Hz.

The wavelength of a wave describes how long the wave is, and can be represented by the formula λ = v/f, where λ is the wavelenght in meters, v is the speed of the wave in m/s, and f is the frecuency of the wave in Hertz.

The wavelength of a wave on a string is 1.2m and its speed is 60m/s, to calculate its frecuency we have to clear f from the equation λ = v/f. So:

f = v/λ

f = (60m/s)/(1.2m)

f = 50 1/s = 50Hz

Answer:

c

Explanation: