Suppose your firm had the following taxable income amounts: 2015 ($5 million) operating loss 2016 $4 million 2017 $4 million 2018 $4 million After you "carry forward" the operating loss, what is the effective taxable income for 2017

Answers

Answer 1

Answer:

$7,000,000

Step-by-step explanation:

The taxable income is the amount of money (income earned or unearned) by an individual or an organization that creates a potential tax liability.

The formula is shown below:

Taxable Income Formula = Gross Total Income – Total Exemptions – Total Deductions

Note that $5,000,000 for 2015 is an operating loss which is a deduction.

Gross Total Income = $4000000+$4000000+$4000000 = $12,000,000

Total Exemption = 0

Total Deductions = $5,000,000

Taxable Income Formula = $12,000,000 - $5,000,000 = $7,000,000

Answer 2
Final answer:

The effective taxable income for 2017 after carrying forward the operating loss is -$1 million.

Explanation:

The question pertains to a business scenario and involves calculating the effective taxable income after carrying forward an operating loss. To calculate the effective taxable income for 2017, we need to consider the operating losses from previous years. In this case, your firm had a $5 million operating loss in 2015. This loss can be carried forward to offset taxable income in future years.

In 2016, the taxable income is $4 million.In 2017, the operating loss from 2015 can be used to offset the taxable income. Therefore, the effective taxable income for 2017 is $4 million - $5 million = -$1 million. Since the result is negative, there is no taxable income for 2017.

Therefore, the effective taxable income for 2017 after carrying forward the operating loss is -$1 million.

Learn more about Calculating effective taxable income after carrying forward operating loss here:

https://brainly.com/question/33697758

#SPJ3


Related Questions

What is the simplified form of this expression?

(-3x2 + 4x) + (2x2 − x − 11)

Answers

Answer:

option b

-x^2 + 3x - 11

Step-by-step explanation:

we have to add the X of the same order

x^2

-3x^2 + 2x^2 = -x^2

x^1

4x + ( -x ) = 3x

x^0

0 + (-11) = -11

finally we accommodate and get the final result

-x^2 + 3x - 11

Answer:-x^2 + 3x - 11

Step-by-step explanation:

I got it right on the test

A study of 31,000 hospital admissions in New York State found that 4% of the admissions led to treatment-caused injuries. One-seventh of these treatment-caused injuries resulted in death, and one-fourth were caused by negligence. Malpractice claims were filed in one out of 7.5 cases involving negligence, and payments were made in one out of every two claims.a. What is the probability a person admitted to the hospital will suffer a treatment-caused injury due to negligence? b. What is the probability a person admitted to the hospital will die from a treatment-caused injury?c. In the case of a negligent treatment-caused injury, what is the probability a malpractice claim will be paid?

Answers

Answer:

Step-by-step explanation:

a) probability a person admitted to the hospital will suffer a treatment-caused injury due to negligence

P(injury) = 4%

P(negligence) = 1/4 = 0.25

We need to find probability (injury)(negligence)

P(injury) * P(negligence) = 0.04*0.25 = 0.01

b) probability a person admitted to the hospital will die from a treatment-caused injury

P(injury) = 4%

P(death) = 1/7

P(Injury) *P(death) = 0.04/7 = 0.00571

c) In the case of a negligent treatment-caused injury, what is the probability a malpractice claim will be paid

P(claim) = 1/7.5

P(payment) = 1/2

P(claim)*P(payment) = 1/7.5 * 1/2 = 0.06

Answer:

a.) 0.01

b.) 0.006

c.)0.00067

Step-by-step explanation:

How do you convert $150,000 US dollars to $240,000 Australian dollars (1.31545 AU) using the exchange rate per US dollar?

Answers

Answer:

240,000 AUD to USD = 161,924.79 US Dollars or 150,000 USD to AUD = 222,316.63 Australian Dollars

Step-by-step explanation:

You select a sample of 50 scores from a population of 2,000 scores. You compute the range and standard deviation on the sample of 50 scores. You then select another sample of 50 scores from the same population. What measure of dispersion is likely to vary most between your first and second samples?

Answers

Answer:

The measure of dispersion which is likely to vary most between your first and second samples is the range.

Step-by-step explanation:

The range and standard deviation of a data are measures of dispersion, i.e. they measure the degree to which the data is dispersed.

The formula to compute the range is:

[tex]Range=X_{max}-X_{min}[/tex]

The formula to compute the sample standard deviation is:

[tex]s=\sqrt{\frac{1}{n-1}\sum (X-\bar X)^{2} }[/tex]

The sample size is: n = 50.

As the sample size is large (n = 50 > 30) the sample standard deviation (s) can be used to approximate the population standard deviation (σ). Thus, whatever the sample values be both the standard deviations can be used to approximate the population standard deviation. Hence, it can be said that both the sample standard deviations are approximately equal.Whereas the range of the two samples are very likely to vary since it is based on the minimum and maximum value of the data. For both the samples the minimum and maximum value may be differ. Thus providing different range values.

Thus, the measure of dispersion which is likely to vary most between your first and second samples is the range.

Final answer:

The range is more likely to vary between two samples from a population due to its sensitivity to extreme values, whereas the standard deviation is a more stable measure of dispersion that accounts for all values in the dataset.

Explanation:

The measure of dispersion most likely to vary between the first and second samples from the population is the range. The range is sensitive to the particular values in the dataset because it only takes into account the smallest and largest values. Since each sample may have a different set of extreme values, the range can vary greatly from sample to sample. In contrast, the standard deviation is less likely to vary significantly between samples, as it measures the amount of variation or dispersion from the mean of a dataset and takes into account all the values in the set.

When drawing multiple samples from a population, the distribution of the sample means will tend to form a normal distribution around the population mean according to the Central Limit Theorem. In the case of a normally distributed population with a known mean and standard deviation, the sampling distribution of the sample mean will have a standard deviation equal to the population standard deviation divided by the square root of the sample size (known as the standard error).

I need a better explanation how to find length and area of a triangle

Answers

Answer:

Height(h) = 24in

Area = 204in²

Step-by-step explanation:

we would use the heron formula because we have all the sides to calulate the area

S  = (A+B+C)/2 = (25 + 17 + 26)/2 = 68/2 = 34

area = √s(s-a)(s-b)(s-c)  = √34(34-25)(34-17)(34-26) = √34(9)(17)(8) = √34x9x17x8 = √41616 = 204

area= (1/2)bh

    204 = (1/2)bh b= 17, h =?

204 = (1/2)17h

204 x 2 = 17h

408 = 17h

h = 408/17 = 24in

Height(h) = 24in

Area = 204in²

The negative sign in 15t-2t belongs to the term____?

Answers

The expression 15t – 2t not equivalent to 2t – 15t because the negative sign in 15t – 2t belongs to the term 2t.

Solution:

Given expressions are 15t – 2t and 2t – 15t.

To determine 15t – 2t is equivalent to 2t – 15t or not.

Substitute t = 2 in above two expressions.

15t – 2t = 15(2) – 2(2)

            = 30 – 4

            = 26

2t – 15t = 2(2) – 15(2)

            = 4 – 30

            = –26

The values of the expressions are different when t = 2.

So, 15t – 2t is not equivalent to 2t – 15t.

Hence the expression 15t – 2t not equivalent to 2t – 15t because the negative sign in 15t – 2t belongs to the term 2t.

A glass of orange juice contains 3.2 dL of juice. How many milliliters of orange juice are in the glass?

Answers

Answer:

There are 320 milliliters of orange juice in the glass.

Step-by-step explanation:

Unit conversion problems can be solved by rules of three.

We have that each dL is worth 100 mL(milliliters).

How many milliliters of orange juice are in the glass?

How many ml are 3.2dL of juice?

1 dL - 100 mL

3.2 dL - x mL

[tex]x = 100*3.2[/tex]

[tex]x = 320[/tex]

There are 320 milliliters of orange juice in the glass.

The measure of juice is 320 milliliters.

Given that

A glass of orange juice contains 3.2 dL of juice.

We have to determine

How many milliliters of orange juice is in the glass?

According to the question

To determine the measure of juice in milliliters following all the steps given below.

A glass of orange juice contains 3.2 dL of juice.

Here 1 dL = 100 milliliters

Then,

The measure of juice in milliliters is,

[tex]\rm = 3.2 \times 100\\\\= 320 \ milliliters[/tex]

Hence, The measure of juice is 320 milliliters.

To know more about Units click the link given below.

https://brainly.com/question/1373943

Find the angle between the vectors. Use a calculator if necessary. (Enter your answer in radians. Round your answer to three decimal places.) (√3,1) and <0, 5 > Find the angle between the vectors. Use a calculator if necessary.<0,4,4> and <3,-3,0>

Answers

Answer:

a. The angle [tex]\phi[/tex] between the vectors [tex]\mathbf{u}=\left(\sqrt{3}, 1\right)[/tex] and [tex]\mathbf{v}=\left(0, 5\right)[/tex] is [tex]\phi=\frac{\pi}{3}[/tex] or [tex]60\º[/tex].

b. The angle [tex]\phi[/tex] between the vectors [tex]\mathbf{u}=\left(0, 4, 4\right)[/tex] and [tex]\mathbf{v}=\left(3, -3, 0\right)[/tex] is [tex]\phi=\frac{2 \pi}{3}[/tex] or [tex]120\º[/tex].

Step-by-step explanation:

a. To calculate the angle [tex]\phi[/tex] between the vectors [tex]\mathbf{u}=\left(\sqrt{3}, 1\right)[/tex] and [tex]\mathbf{v}=\left(0, 5\right)[/tex] you must:

Step 1: Calculate the dot product.

The dot product is given as [tex]\displaystyle{\large{{\left({u}_{{x}},{u}_{{y}}\right)}\cdot{\left({v}_{{x}},{v}_{{y}}\right)}={u}_{{x}}\cdot{v}_{{x}}+{u}_{{y}}\cdot{v}_{{y}}}}[/tex].

So,

[tex]\left(\sqrt{3}, 1\right)\cdot\left(0, 5\right)=\left(\sqrt{3}\right)\cdot\left(0\right)+\left(1\right)\cdot\left(5\right)=5[/tex]

Step 2: Find the lengths of the vectors.

[tex]\left|\mathbf{u}\right|=\sqrt{\left(u_x\right)^2+\left(u_y\right)^2}=\sqrt{\left(\sqrt{3}\right)^2+\left(1\right)^2}=2[/tex]

[tex]\left|\mathbf{v}\right|=\sqrt{\left(v_x\right)^2+\left(v_y\right)^2}=\sqrt{\left(0\right)^2+\left(5\right)^2}=5[/tex]

Step 3: The angle is given by [tex]\cos\left(\phi\right)=\frac{\mathbf{u} \cdot \mathbf{v}}{\left|\mathbf{u}\right| \cdot \left|\mathbf{v}\right|}[/tex]

[tex]\frac{5}{2 \cdot 5}=\frac{1}{2}[/tex]

[tex]\phi=cos^{-1}\left(\frac{1}{2}\right)=\frac{\pi}{3}=60^0[/tex]

b. To calculate the angle [tex]\phi[/tex] between the vectors [tex]\mathbf{u}=\left(0, 4, 4\right)[/tex] and [tex]\mathbf{v}=\left(3, -3, 0\right)[/tex] you must:

Step 1: Calculate the dot product.

[tex]\left(0, 4, 4\right)\cdot\left(3, -3, 0\right)=\left(0\right)\cdot\left(3\right)+\left(4\right)\cdot\left(-3\right)+\left(4\right)\cdot\left(0\right)=-12[/tex]

Step 2: Find the lengths of the vectors.

[tex]\left|\mathbf{u}\right|=\sqrt{\left(u_x\right)^2+\left(u_y\right)^2+\left(u_z\right)^2}=\sqrt{\left(0\right)^2+\left(4\right)^2+\left(4\right)^2}=4 \sqrt{2}[/tex]

[tex]\left|\mathbf{v}\right|=\sqrt{\left(v_x\right)^2+\left(v_y\right)^2+\left(v_z\right)^2}=\sqrt{\left(3\right)^2+\left(-3\right)^2+\left(0\right)^2}=3 \sqrt{2}[/tex]

Step 3: The angle is given by [tex]\cos\left(\phi\right)=\frac{\mathbf{u} \cdot \mathbf{v}}{\left|\mathbf{u}\right| \cdot \left|\mathbf{v}\right|}[/tex]

[tex]\cos\left(\phi\right)=\frac{\mathbf{u} \cdot \mathbf{v}}{\left|\mathbf{u}\right| \cdot \left|\mathbf{v}\right|}=\frac{-12}{4 \sqrt{2} \cdot 3 \sqrt{2}}=- \frac{1}{2}[/tex]

[tex]\phi=cos^{-1}\left(- \frac{1}{2}\right)=\frac{2 \pi}{3}=120^0[/tex]

Final answer:

To find the angle between two vectors, use the dot product formula. For the vectors (√3,1) and <0, 5 >, the angle is π/3 radians. For the vectors <0,4,4> and <3,-3,0>, the angle is 2π/3 radians.

Explanation:

To find the angle between two vectors, we can use the dot product formula. Let's start with the first set of vectors (√3,1) and <0, 5>. We can calculate the dot product by multiplying the corresponding components and adding them up: (√3)(0) + (1)(5) = 5. Next, we need to calculate the magnitudes of each vector. The magnitude of (√3,1) is √(√3)^2 + 1^2 = √4 = 2. The magnitude of <0, 5> is √0^2 + 5^2 = √25 = 5. Now, we can calculate the angle between the vectors using the formula: cosθ = dot product / (magnitude 1 * magnitude 2). Plugging in the values, cosθ = 5 / (2 * 5) = 1/2. Taking the inverse cosine of 1/2 gives us the angle in radians: θ = acos(1/2) = π/3 ≈ 1.047.

For the second set of vectors <0,4,4> and <3,-3,0>, we will follow the same steps. The dot product is (0)(3) + (4)(-3) + (4)(0) = -12. The magnitude of <0,4,4> is √0^2 + 4^2 + 4^2 = √32 = 4√2. The magnitude of <3,-3,0> is √3^2 + (-3)^2 + 0^2 = √18 = 3√2. Plugging in the values, cosθ = -12 / (4√2 * 3√2) = -1/2. Taking the inverse cosine of -1/2 gives us the angle in radians: θ = acos(-1/2) = 2π/3 ≈ 2.094.

Learn more about Angle between vectors here:

https://brainly.com/question/25987114

#SPJ3

A recent survey estimated that 19 percent of all people living in a certain region regularly use sunscreen when going outdoors. The margin of error for the estimate was 1 percentage point. Based on the estimate and the margin of error, which is an appropriate conclusion?

Answers

Final answer:

The appropriate conclusion from the survey is that the true percentage of all people who regularly use sunscreen in the region is estimated to be between 18% and 20%, considering the margin of error of 1 percentage point.

Explanation:

Based on the estimate and the margin of error, an appropriate conclusion is that it can be said with a certain level of confidence, usually 95%, that the true percentage of all people living in that region who regularly use sunscreen when going outdoors is between 18% and 20%. The margin of error gives a range around the estimate to account for the sampling error, and it implies that the actual value in the population should fall within this range. This helps to understand the precision of the survey result and allows for the natural variability that comes from the fact that not every individual in the region was surveyed.

The variability also depends on the size of the sample, which relates to the confidence interval. For example, smaller samples tend to have larger margins of error, while larger samples tend to lead to smaller margins of error and thus, more precise estimates of the population parameter.

Angela took a general aptitude test and scored in the 91st percentile for aptitude in accounting. (a) What percentage of the scores were at or below her score?(b) What percentage were above?

Answers

Answer:

a) 91% of the scores were at or below her score.

b) 9% of the scores were above her score.

Step-by-step explanation:

When a value V is said to be in the xth percentile of a set, x% of the values in the set are lower than V and (100-x)% of the values in the set are higher than V.

In this problem, we have that:

Angela scored on the 91st percentile.

(a) What percentage of the scores were at or below her score?

Since Angela scored on the 91st percentile, 91% of the scores were at or below her score.

(b) What percentage were above?

Since Angela scored on the 91st percentile, 9% of the scores were above her score.

Final answer:

Angela scored higher than or equal to 91% of her peers, meaning 9% scored above her.

Explanation:

If Angela scored in the 91st percentile on her general aptitude test, that means she scored higher than or equal to 91% of the other scores. Therefore, (a) 91% of scores were at or below Angela's score. As for (b), if you subtract her percentile from 100%, you can determine that 9% of scores were above hers.

Learn more about Percentiles here:

https://brainly.com/question/34021797

#SPJ3

Suppose x is a random variable best described by a uniform probability distribution with c=20 and d=40.
Find the probability P(20≤x≤35).

Answers

Answer:

P(20≤x≤35) = 0.75 .

Step-by-step explanation:

We know that the probability distribution function of Uniform Distribution is represented as :

     If x follows Uniform(c,d) then,

          f(x) = [tex]\frac{1}{d-c}[/tex] where c < x < d

To fond the given probability it is better to first calculate the Cumulative Distribution Function(CDF) of Uniform Distribution.

The CDF of Uniform Distribution is P(X<=x) = [tex]\frac{x-c}{d-c}[/tex] where d > c .

Therefore, P(20<=x<=35) = P(x<=35) - P(x<20)

  P(x<=35) =  [tex]\frac{x-20}{40-20}[/tex]  because we are given c = 20 and d = 40.

                 = [tex]\frac{35-20}{40-20}[/tex] = 0.75

 P(x<20) =  [tex]\frac{x-20}{40-20}[/tex]  = [tex]\frac{20-20}{40-20}[/tex] = 0

Hence, P(20<=x<=35) = 0.75 - 0 = 0.75.

Final answer:

The probability of x being between 20 and 35 is 0.75 or 75%.

Explanation:

The uniform probability distribution is defined as:

P(x) = 1/(b-a) for a ≤ x ≤ b and 0 otherwise.

In this case, a=20 and b=40, so the probability P(20≤x≤35) can be calculated as:

P(20≤x≤35) = (35-20)/(40-20) = 15/20 = 0.75.

Therefore, the probability of x being between 20 and 35 is 0.75 or 75%.

Learn more about uniform probability distribution here:

https://brainly.com/question/32614835

#SPJ3

APPLY IT Rate of Growth The area covered by a patch of moss is growing at a rate of

A'(t)=√ t ln t

cm^2 per dat, for t≥1. ≥ 1. Find the additional amount of area covered by the moss between 4 and 9 days.

Answers

Answer:

The additional amount of area covered between 4 to 9 days is 23.71 cm2

Step-by-step explanation:

As the relation is given as a combination of two functions so integration by parts is carried out thus

[tex]\int\limits^9_4 {\sqrt{t}\, ln t} \, dt[/tex]

In order to solve this integral, integration by parts is to be carried out which is given as

[tex]\int u v dx=u \int v dx -\int u'(\int vdx) dx[/tex]

Where

u(x) is a function of x

v(x) is a function of x

u' is the derivative of u wrt to x

Also u and v are defined on using the following sequence  ILATE RULE (Inverse, Logarithmic, Algebraic, Trigonometric, Exponent)

As here Logarithmic function is present which is taken as u and the algebraic function is taken as v so

[tex]u= ln t\\v=\sqrt{t}\\u'=\frac{1}{t}[/tex]

[tex]\int v dt =\int t^{1/2} dt =\frac{2}{3}t^{3/2}[/tex]

Substituting the values in equation gives

[tex]\int u v dt=u \int v dt -\int u'(\int vdt) dt\\\int{\sqrt{t}\, ln t} \, dt=ln t (\frac{2}{3}t^{3/2}) -\int(\frac{1}{t} )(\frac{2}{3}t^{3/2}) dt\\\int{\sqrt{t}\, ln t} \, dt=ln t (\frac{2}{3}t^{3/2}) -\int(\frac{2}{3}t^{1/2}) dt\\\int{\sqrt{t}\, ln t} \, dt=ln t (\frac{2}{3}t^{3/2}) -\frac{2}{3}\int(t^{1/2}) dt\\\int{\sqrt{t}\, ln t} \, dt=ln t (\frac{2}{3}t^{3/2}) -\frac{2}{3}(\frac{2}{3}t^{3/2}) +C\\\int{\sqrt{t}\, ln t} \, dt=ln t (\frac{2}{3}t^{3/2}) -\frac{4}{9}(t^{3/2}) +C[/tex]

Now solving the definite integral

[tex]\int\limits^9_4 {\sqrt{t}\, ln t} \, dt=ln t (\frac{2}{3}t^{3/2}) -\frac{4}{9}(t^{3/2}) +C\\\int\limits^9_4 {\sqrt{t}\, ln t} \, dt=[ln t (\frac{2}{3}t^{3/2}) -\frac{4}{9}(t^{3/2})]_{9} -[ln t (\frac{2}{3}t^{3/2}) -\frac{4}{9}(t^{3/2})]_{4}\\\int\limits^9_4 {\sqrt{t}\, ln t} \, dt=18 ln (9)-\frac{16}{3} ln 4 -\frac{76}{9}\\A=\int\limits^9_4 {\sqrt{t}\, ln t} \, dt=23.71 cm^2\\[/tex]

So the additional amount of area covered between 4 to 9 days is 23.71 cm2

PLZ HELP A delivery truck is transporting boxes of two sizes: large and small. The large boxes weigh 55 pounds each, and the small boxes weigh 35 pounds each. There are 125 boxes in all. If the truck is carrying a total of 4950 pounds in boxes, how many of each type of box is it carrying?

Answers

Answer:

There were 28.75 large boxes and 96.25 small boxes.

Step-by-step explanation:

Create a system of equations to solve.

State your variables

let x be the number of small boxes

let y be the number of large boxes

35x + 55y = 4950               Equation for weight

x + y = 125                          Equation for number of boxes

Rearrange equation for number of boxes to isolate "x".

x = 125 - y

Substitute the new equation into the equation for weight

35x + 55y = 4950

35(125 - y) + 55y = 4950

Expand the brackets

4375 - 35y + 55y = 4950       Combine like terms

4375 + 20y = 4950

Start isolating "y"

4375 + 20y = 4950

4375 - 4375 + 20y = 4950 - 4375         subtract 4375 from both sides

20y = 575

20y/20 = 575/20                         divide both sides by 20

y = 28.75                   number of large boxes

Calculate "x". Rearrange the equation for number of boxes to isolate "y".

y = 125 - x                    Substitute this expression

35x + 55y = 4950                          equation for weight

35x + 55(125 - x) = 4950                 expand the brackets

35x + 6875 - 55x = 4950                     combine like terms

6875 - 20x = 4950                              start isolating "x"

6875 - 6875 - 20x = 4950 - 6875            subtract 6875 on both sides

-20x = -1925

-20x/-20 = -1925/-20                     divide both sides by -20

x = 96.25                    number of small boxes

There is a mistake with this question because you should not be able to have partial boxes. However, the answer is:

There were 28.75 large boxes and 96.25 small boxes.

The brain volumes ​(cm cubed​) of 20 brains have a mean of 1105.1 cm cubed and a standard deviation of 123.5 cm cubed. Use the given standard deviation and the range rule of thumb to identify the limits separating values that are significantly low or significantly high. For such​ data, would a brain volume of 1332.1 cm cubed be significantly​ high? Significantly low values are 858 cm cubed or lower. ​(Type an integer or a decimal. Do not​ round.)

Answers

Answer:

[tex]1332.1 \:cm^3[/tex] is neither significantly low nor significantly high.

Step-by-step explanation:

From the information given, we know that:

The mean is [tex]\bar{x}=1105.1 \:cm^{3}[/tex] and the standard deviation is [tex]\sigma=123.5 \:cm^{3}[/tex].

The range rule of thumb says that:

[tex]minimum \:usual \:value=\bar{x}-2\sigma\\\\maximum \:usual \:value=\bar{x}+2\sigma[/tex]

Applying these definitions, we get that

[tex]minimum \:usual \:value=1105.1-2(123.5)=858.1 \:cm^3\\\\maximum \:usual \:value=1105.1+2(123.5)=1352.1 \:cm^3[/tex]

We note that [tex]1332.1 \:cm^3[/tex] is between [tex]858.1 \:cm^3[/tex] and [tex]1352.1 \:cm^3[/tex], which indicates  [tex]1332.1 \:cm^3[/tex] is neither significantly low nor significantly high.

A company has fixed monthly costs of $100,000 and production costs on its product of $28 per unit. The company sells its product for $74 per unit. The cost function, revenue function and profit function for this situation are

Answers

Answer:

The cost function is [tex]C(x)=100000+x\cdot 28[/tex]

The revenue function is [tex]R(x)=x\cdot 74[/tex]

The profit function is [tex]P(x)=46x-100000[/tex]

Step-by-step explanation:

We have the following definitions:

The cost function consists of variable costs and fixed costs and is given by

[tex]C(x)=fixed\:costs+x\cdot variable\:costs[/tex]

The revenue function is given by

[tex]R(x)=x\cdot p(x)[/tex]

where x are the units sold and p(x) is the price per unit.

The profit function is given by

[tex]P(x)=R(x)-C(x)[/tex]

Given:

Fixed costs = $100,000

Variable costs = $28 per unit

Price per unit = $74 per unit

Applying the above definitions and the information given, we get that:

The cost function is [tex]C(x)=100000+x\cdot 28[/tex]

The revenue function is [tex]R(x)=x\cdot 74[/tex]

The profit function is [tex]P(x)=74x-(28x+100000)=46x-100000[/tex]

Final answer:

The total cost for producing 1,000 units of output, given average fixed costs of $100 and average variable costs of $50, is calculated to be $150,000.

Explanation:

The question asks us to calculate total cost of producing 1,000 units of output given the average fixed costs and average variable costs. To find the total cost, we need to add together the total fixed costs (average fixed cost × quantity) and the total variable costs (average variable cost × quantity).

The total fixed cost is $100,000 (since $100 × 1,000 units) and the total variable cost is $50,000 (since $50 × 1,000 units). Therefore, the total cost of producing 1,000 units of output is $150,000.

This problem involves two distinct sets of events, which we label A1and A2 and B1 and B2. The events A1and A2 are mutually exclusive and collectively exhaustive within their set. The events B1and B2 are mutually exclusive and collectively exhaustive within their set. Intersections can occur between all events from the two sets.Given P(A1)= 0.8, P(B1|A1) = 0.6, and P(B1|A2) = 0.2, what is P(A1|B1)?

Answers

Answer:

0.42

Step-by-step explanation:

Let the events be given as:

For twp mutually exclusive events, the probability of A1 is given as follows:

P (B1A1) = [tex]\frac{ P(B1) x P (BA1)}{P(A1)}[/tex]

             = 0.6

Solving the equation above  to get B1:

P (B1) = [tex]\frac{(0.8)x (0.6)}{(0.6)}[/tex]

         = 0.8

Therefore, computing P (A1B1) gives P(A1) × P (B1)

                                                          =  (0.8) × (0.6)

                                                          =  0.42 Ans

Let f be the function that determines the area of a circle (in square cm) given the radius of the circle in cm, r. That is, f(r) represents the area of a circle (in square cm) whose radius is r cm. Use function notation to complete the following tasks a. Represent the area (in square cm) of a circle whose radius is 4 cm. Preview syntax error b. Represent how much the area (in square cm) of a circle increases by when its radius increases from 10.9 to 10.91 cm. # Preview syntax error c. Represent the area of 5 circles that all have a radius of 12.7 cm *Preview syntax error d. A circle has a radius of 28 cm. Another larger circle has an area that is 59 square cm more than the first circle. Represent the area of the larger circle. # Preview) syntax error

Answers

Part(a):[tex]f(r)=f(4)[/tex]

Part(b):[tex]f(10.91)-f(10.9)[/tex]

Part(c):[tex]5 f(r)=5 f(12.7)[/tex]

Part(d):[tex]28+59 =f(28)+59[/tex]

Area of the circle:

The area of a circle is the region occupied by the circle in a two-dimensional plane. It can be determined easily using a formula,

[tex]A= \pi r^2[/tex]

where [tex]r[/tex] is the radius of the circle

The formula for the area of the circle is,

[tex]A=\pi r^2[/tex]

Part(a):

Given,

Radius([tex]r[/tex])=4 cm

So, the area is [tex]f(r)=f(4)[/tex]

Part(b):

Given,

[tex]r=10.91\\r=10.9[/tex]

The difference in area is,

[tex]f(10.91)-f(10.9)[/tex]

Part(c):

Area of 5 circles are,

[tex]5 f(r)=5 f(12.7)[/tex]

Part(d):

The area of the larger circle is,

Area of the circle of radius [tex]28+59 =f(28)+59[/tex]

Learn more about the topic Area of the circle:

https://brainly.com/question/10645610

Suppose that we have a standard Solow model with a Cobb-Douglas production function. The central equation of the model is as follows: kt+1 = sAkα t + (1 − δ)kt . Consumption per worker is given by: ct = (1 − s)Akα t . (a) Solve for an expression for the steady state capital stock per worker. In doing so, assume that the level of productivity is fixed at some value A.

Answers

Answer:

The answer is shown in the attachment

Step-by-step explanation:

The detailed step by step and appropriate mathematical manipulation for the expression for the steady state capital stock per worker is as shown in the attachment.

Researchers measure the body temperature of 52 randomly selected adults. They find a mean temperature of 98.2 degrees with a standard deviation of 0.682 degrees. Which of the following is the correct t-test statistic and p-value for a test of the following hypotheses?
H_o: mu = 98.6 degrees
H_a: mu notequalto 98.6 degrees
The test statistic is negative 1. 039.21.and the p-value is less than 0.000001.
The test statistic is negative 0.46.and the p-value is 2 times P(t_51 > -0.46).
The t-test statistic is negative 0.315.and the p-value is P(t_51 < -0.315).
The t-test statistic is negative 3.33.and the p-value is two times P(t_51 < -3.33).

Answers

Answer:

The t-test statistic is -3.33.and the p-value is two times P(t_51 < -3.33).

Step-by-step explanation:

Data given and notation  

Assuming that the real sample mean is: [tex]\bar X=98.285[/tex] represent the sample mean

[tex]s=0.682[/tex] represent the sample standard deviation  

[tex]n=52[/tex] sample size  

[tex]\mu_o =98.6[/tex] represent the value that we want to test  

[tex]\alpha[/tex] represent the significance level for the hypothesis test.  

t would represent the statistic (variable of interest)  

[tex]p_v[/tex] represent the p value for the test (variable of interest)  

State the null and alternative hypotheses.  

We need to apply a two tailed test.  

What are H0 and Ha for this study?  

Null hypothesis: [tex]\mu = 98.6[/tex]  

Alternative hypothesis :[tex]\mu \neq 98.6[/tex]  

Compute the test statistic  

The statistic for this case is given by:  

[tex]t=\frac{\bar X-\mu_o}{\frac{s}{\sqrt{n}}}[/tex] (1)  

t-test: "Is used to compare group means. Is one of the most common tests and is used to determine if the mean is (higher, less or not equal) to an specified value".  

Calculate the statistic  

We can replace in formula (1) the info given like this:  

[tex]t=\frac{98.2-98.6}{\frac{0.682}{\sqrt{52}}}=-3.298[/tex]  

Now we can calculate the degrees of freedom and we got:

[tex] df = n-1 = 52-1 = 51[/tex]

P value

Since is a two tailed test the p value would be:  

[tex]p_v =2*P(t_{51}<-3.3)=0.0018[/tex]  

So the most appropiate conclusion for this case would be:

The t-test statistic is -3.33.and the p-value is two times P(t_51 < -3.33).

If a student determined that the volume of a sample of water is 11.4 mL, and its mass is 10.98 g, what should the student record as the experimental density of the water sample, with the correct number of significant figures

Answers

Answer:1.04 ml/g.

Step-by-step explanation:

The formula we use to find the density :

[tex]\text{Density}=\dfrac{\text{Volume}}{\text{Mass}}[/tex]

We are given that ,

Volume of a sample of water = 11.4 mL

Mass of sample of water = 10.98 g

Then , the experimental density of the water sample will be :-

[tex]\text{Density}=\dfrac{11.4}{10.98}=1.03825136\approx1.04[/tex]  

Hence, the experimental density of the water sample is 1.04 ml/g.


You have decided that you want to be a millionaire when you retire in 44 years. If you can earn an annual return of 11.06 percent, how much do you have to invest today? What if you can earn an annual return of 5.53 percent?

Answers

Answer:

1. Let amount deposited now be P.

So P*(1.1106^44) = 1,000,000, which means P=9896.06

2. Let amount deposited now be P.

So P*(1.0553^44) = 1,000,000, which means P=93639.42

Step-by-step explanation:

Answer:

Step-by-step explanation:

Let P represent the amount that you need to invest today. Thus, principal = $P

The return would be compounded annually. So

n = 1

The rate at which the principal would be compounded is 11.06%. So

r = 11.06/100 = 0.1106

The investment would be for 44 years. So

t = 44

The formula for compound interest is

A = P(1+r/n)^nt

A = total amount in the account at the end of t years.

A = $1000000

Therefore

1000000 = P(1+0.1106/1)^1×44

1000000 = P(1.1106)^44

P = 1000000/101.05

P = $9896.1

2) if you can earn an annual return of 5.53 percent, then

r = 5.53/100 = 0.053

1000000 = P(1+0.53/1)^1×44

1000000 = P(1.053)^44

P = 1000000/9.7

P = $103093

Find the perimeter of the following shape, rounded to the nearest tenth:

Answers

Answer: the perimeter of the shape is 19.1

Step-by-step explanation:

To determine the length of each side of the quadrilateral, we would apply Pythagoras theorem which is expressed as

Hypotenuse² = opposite side² + adjacent side

For line AD,

AD² = 2² + 4² = 4 + 16 = 20

AD = √20 = 4.47

For line AB,

AB² = 1² + 5² = 1 + 25 = 26

AB = √26 = 5.1

For line BC,

BC² = 2² + 4² = 4 + 16 = 20

BC = √20 = 4.47

For line CD,

CD² = 1² + 5² = 1 + 25 = 26

CD = √26 = 5.1

The perimeter of a plane figure is the distance around the figure. Therefore

Perimeter = AB + AB + BC + CD

Perimeter = 4.47 + 5.1 + 4.47 + 5.1 =

19.1

Answer:

19.1

Step-by-step explanation:

Got it right on the test! <3

Customers arrive at Rich Dunn’s Styling Shop at a rate of 3 per hour, distributed in a Poisson fashion. Rich’s service times follow a negative exponential distribution, and Rich can complete an average of 5 haircuts per hour. a) Find the average number of customers waiting for haircuts. b) Find the average number of customers in the shop. c) Find the average time a customer waits until it is his or her turn. d) Find the average time a customer spends in the shop. e) Find the percentage of time that Rich is busy.

Answers

Answer:

a) 0.9,b) 1.5,c) 0.3hrs, d) 0.5hrs,e)  60%

Step-by-step explanation:

Given Data:

rate of arrival   = 3customers/hr ;

rate of service = 5 haircuts/hr    ;

a)

Average number of customers = La = λ²/[μ(μ-λ)]

                                                           = 3²/[(5(5-3)]

Average number of customers = La = 0.9

b)

Number of customers in system = Ls = λ/(μ-λ)

                                                             = 3/(5-3)

Number of customers in system = Ls = 1.5

c)

Average waiting time = Ta = λ/[μ(μ-λ)]

                                             = 3/[(5(5-3)]

Average waiting time = Ta =0.3hrs or 18mins

d)

Average time spent by customer = Ts = 1/(μ-λ)

                                                               = 1/(5-3)

Average time spent by customer = Ts = 0.5hrs or 30mins

e)

% of time  = Tr = λ/μ

                        = 3/5

% of time  = Tr = 0.6 or 60%

The arrival of customers follows a Poisson distribution

The average number of customers waiting for haircut is 0.9The average number of customers in the shop is 1.5The average time of waiting for haircut is 0.3 hourThe average time spent in the shop is 0.5 hourRich is busy 60% of the time

The given parameters are:

[tex]\mathbf{\lambda = 3}[/tex] --- rate of arrival

[tex]\mathbf{\mu= 5}[/tex] ---- rate of service

(a) Average number of customers waiting

This is calculated using:

[tex]\mathbf{L_a = \frac{\lambda^2}{\mu(\mu - \lambda)}}[/tex]

So, we have:

[tex]\mathbf{L_a = \frac{3^2}{5(5 - 3)}}[/tex]

[tex]\mathbf{L_a = \frac{9}{5 \times 2}}[/tex]

[tex]\mathbf{L_a = \frac{9}{10}}[/tex]

[tex]\mathbf{L_a = 0.9}[/tex]

Hence, the average number of customers waiting for haircut is 0.9

(b) Average number of customers in the shop

This is calculated using:

[tex]\mathbf{L_s = \frac{\lambda}{\mu - \lambda}}[/tex]

So, we have:

[tex]\mathbf{L_s = \frac{3}{5 - 3}}[/tex]

[tex]\mathbf{L_s = \frac{3}{2}}[/tex]

[tex]\mathbf{L_s = 1.5}[/tex]

Hence, the average number of customers in the shop is 1.5

(c) Average time of waiting

This is calculated using:

[tex]\mathbf{T_a = \frac{\lambda}{\mu(\mu - \lambda)}}[/tex]

So, we have:

[tex]\mathbf{T_a = \frac{3}{5(5 - 3)}}[/tex]

[tex]\mathbf{T_a = \frac{3}{5 \times 2}}[/tex]

[tex]\mathbf{T_a = \frac{3}{10}}[/tex]

[tex]\mathbf{T_a = 0.3}[/tex]

Hence, the average time of waiting for haircut is 0.3 hour

(d) Average time spent in the shop

This is calculated using:

[tex]\mathbf{T_s = \frac{1}{\mu - \lambda}}[/tex]

So, we have:

[tex]\mathbf{T_s = \frac{1}{5 - 3}}[/tex]

[tex]\mathbf{T_s = \frac{1}{2}}[/tex]

[tex]\mathbf{T_s = 0.5}[/tex]

Hence, the average time spent in the shop is 0.5 hour

(e) Percentage of time Rich is busy

This is calculated as:

[tex]\mathbf{T = \frac{\lambda}{\mu}}[/tex]

So, we have:

[tex]\mathbf{T = \frac{3}{5}}[/tex]

Divide

[tex]\mathbf{T = 0.6}[/tex]

Express as percentage

[tex]\mathbf{T = 60\%}[/tex]

Hence, Rich is busy 60% of the time

Read more about Poisson distribution at:

https://brainly.com/question/17280826

A consumer products company found that 44​% of successful products also received favorable results from test market​ research, whereas 13​% had unfavorable results but nevertheless were successful. That​ is, P(successful product and favorable test ​market) = 0.44 and​ P(successful product and unfavorable test ​market) = 0.13. They also found that 32​% of unsuccessful products had unfavorable research​ results, whereas 11​% of them had favorable research​ results, that is​ P(unsuccessful product and unfavorable test ​market) = 0.32 and​ P(unsuccessful product and favorable test ​market) = 0.11.
Find the probabilities of successful and unsuccessful products given known test market​ results, that​ is, P(successful product given favorable test​ market), P(successful product given unfavorable test​ market), P(unsuccessful product given favorable test​ market), and​ P(unsuccessful product given unfavorable test​ market).

Answers

Answer:

0.800.2890.200.711

Step-by-step explanation:

Given:

[tex]P(S\cap F)=0.44\\P(S\cap F^{c})=0.13\\P(S^{c}\cap F^{c}) = 0.32\\P(S^{c}\cap F) = 0.11[/tex]

The rule of total probability states that:

[tex]P(A) = P(A\cap B) + P(A\cap B^{c})[/tex]

Compute the individual probabilities as follows:

[tex]P(S) = P(S\cap F) + P(S\cap F^{c})\\=0.44+0.13\\0.57[/tex]

[tex]P(S^{c}) = 1 - P(S)\\=1-0.57\\=0.43[/tex]

[tex]P(F) = P(S\cap F) + P(S^{c}\cap F)\\=0.44+0.11\\=0.55[/tex]

[tex]P(F^{c})=1-P(F)\\=1-0.55\\=0.45[/tex]

Conditional probability of an event A given B is:

[tex]P(A|B)=\frac{P(A\cap B)}{P(B)}[/tex]

Compute the value of [tex]P(S|F)[/tex]:

         [tex]P(S|F)=\frac{P(S\cap F)}{P(F)}\\=\frac{0.44}{0.55}\\=0.80[/tex]

Compute the value of [tex]P(S|F^{c})[/tex]

        [tex]P(S|F^{c})=\frac{P(S\cap F^{c})}{P(F^{c})}\\=\frac{0.13}{0.45}\\=0.289[/tex]

Compute the value of [tex]P(S^{c}|F)[/tex]

        [tex]P(S^{c}|F)=\frac{P(S^{c}\cap F)}{P(F}\\=\frac{0.11}{0.55}\\=0.20[/tex]

Compute the value of[tex]P(S^{c}|F^{c})[/tex]

       [tex]P(S^{c}|F^{c})=\frac{P(S^{c}\cap F^{c})}{P(F^{c})}\\=\frac{0.32}{0.45}\\=0.711[/tex]

Final answer:

The probability of successful product given favorable test market is 0.80, and the probability of successful product given unfavorable test market is 0.29. The probability of unsuccessful product given favorable test market is 0.20, and the probability of unsuccessful product given unfavorable test market is 0.71.

Explanation:

To solve this, we first need to determine the total probability of each market test outcome. The probability that the market test is favorable (P(favorable test market)) can be found by summing the probabilities of a successful product with a favorable test market and an unsuccessful product with a favorable test market. Therefore, P(favorable test market) = 0.44 + 0.11 = 0.55. Similarly, P(unfavorable test market) = 0.13 + 0.32 = 0.45.

To find the conditional probabilities, we use the formula P(A|B) = P(A and B) / P(B):

P(successful product given favorable test market) = P(successful product and favorable test market) / P(favorable test market) = 0.44 / 0.55 = 0.80.P(successful product given unfavorable test market) = P(successful product and unfavorable test market) / P(unfavorable test market) = 0.13 / 0.45 = 0.29.P(unsuccessful product given favorable test market) = P(unsuccessful product and favorable test market) / P(favorable test market) = 0.11 / 0.55 = 0.20.P(unsuccessful product given unfavorable test market) = P(unsuccessful product and unfavorable test market) / P(unfavorable test market) = 0.32 / 0.45 = 0.71.

Learn more about Conditional Probability here:

https://brainly.com/question/32171649

#SPJ3

The approximate heights of two of the​ world's tallest mountains are given. Determine which is the taller mountain and by how many meters. Round to the nearest meter. ​(1 in equals 2.54 cm; 1 ft equals 30.48 cm; 1 yd almost equals 0.9144 m; 1 mi almost equals 1.6 km1 in = 2.54 cm; 1 ft = 30.48 cm; 1 yd ≈ 0.9144 m; 1 mi ≈ 1.6 km​) Lhotse: 8516 meters and Ngadi Chuli: 25,866 feet

Answers

Answer:

Height of Lhotse mountain is greater than Ngadi Chuli mountain.

Height of Lhotse mountain is 632.0432 meter more than height of Ngadi Chuli mountain.

Step-by-step explanation:

Height of Lhotse mountain = 8516 meters

Height of Ngadi Chuli mountain = 25,866 feet

1 ft = 30.48 cm

[tex]25,866 feet =25,866\times 30.48 m=788,395.68 cm[/tex]

1 cm = 0.01 m

[tex]788,395.68 cm=788,395.68\times 0.01 m=7883.9568 m[/tex]

8516 meters > 7883.9568 m

Height of Lhotse mountain is greater than Ngadi Chuli mountain.

Difference in their height :

8516 meters -  7883.9568 m = 632.0432 m

Height of Lhotse mountain is 632.0432 meter more than height of Ngadi Chuli mountain.

Final answer:

The height of Ngadi Chuli is approximately 7871 meters, while the height of Lhotse is 8516 meters. Therefore, Lhotse is the taller mountain and is about 645 meters taller than Ngadi Chuli.

Explanation:

The height of Ngadi Chuli is given in feet, so we must first convert that to meters using the conversion factor 1 ft = 30.48 cm = 0.3048 m. Multiplying 25,866 feet by 0.3048 m/ft gives us an approximate height of 7871 meters for Ngadi Chuli.

Lhotse is given to be 8516 meters tall. Therefore, by comparing these two heights, we can determine that Lhotse is the taller mountain.

The difference in height is found by subtracting the height of Ngadi Chuli from that of Lhotse: 8516 m - 7871 m = 645 m. So, Lhotse is approximately 645 meters taller than Ngadi Chuli.

Learn more about Comparison of Heights here:

https://brainly.com/question/31956811

#SPJ3

A newly proposed endoscopy method used to screen for colon cancer is tested among a random sample of the population. Given that 16 individuals from a test population of 100,000 individuals has colon cancer and 14 individuals test positive for colon cancer, the researchers should determine the sensitivity of the newly proposed screening method is 0.875.

Please explain why this is true

Answers

Answer:

The value of sensitivity obtained is equal to the one given in statement.

Step-by-step explanation:

Sensitivity is the ratio of number of positive test results to the number of individuals having disease. It is the ability of the test to detect all those with disease in the screened population.

Its formula is written as:

Sensitivity = [tex]\frac{number of true positives}{total with disease}[/tex]

So, in this case we have values

sensitivity = 14/16 = 0.875 So, the given statement is true.

Suppose x is a normally distributed random variable with µ = 56 and σ = 3. Find a value x0 of the random variable x that satisfies the following equations or statements.a.​ 10% of the values of x are less than x0.b.​ 80% of the values of x are less than x0.c.​1% of the values of x are greater than x0.

Answers

Answer:

a) 52.15

b) 58.53

c) 62.98        

Step-by-step explanation:

We are given the following information in the question:

Mean, μ = 56

Standard Deviation, σ = 3

We are given that the distribution of x is a bell shaped distribution that is a normal distribution.

Formula:

[tex]z_{score} = \displaystyle\frac{x-\mu}{\sigma}[/tex]

a) We have to find [tex]x_0[/tex] such that

P(X < x)  = 0.1

[tex]P( X < x) = P( z < \displaystyle\frac{x_0 - 56}{3})=0.1[/tex]  

Calculation the value from standard normal z table, we have,  

[tex]P(z < -1.282) = 0.1[/tex]

[tex]\displaystyle\frac{x_0 - 56}{3} = -1.282\\\\x_0 = 52.15[/tex]

b) We have to find [tex]x_0[/tex] such that

P(X < x)  = 0.8

[tex]P( X < x) = P( z < \displaystyle\frac{x_0 - 56}{3})=0.8[/tex]  

Calculation the value from standard normal z table, we have,  

[tex]P(z < 0.842) = 0.8[/tex]

[tex]\displaystyle\frac{x_0 - 56}{3} = 0.842\\\\x_0 = 58.53[/tex]

c) We have to find [tex]x_0[/tex] such that

P(X > x)  = 0.01

[tex]P( X > x) = P( z > \displaystyle\frac{x - 56}{3})=0.01[/tex]  

[tex]= 1 -P( z \leq \displaystyle\frac{x - 56}{3})=0.01 [/tex]  

[tex]=P( z \leq \displaystyle\frac{x - 56}{3})=0.99 [/tex]  

Calculation the value from standard normal z table, we have,  

[tex]P(z < 2.326) = 0.99[/tex]

[tex]\displaystyle\frac{x_0 - 56}{3} = 2.326\\\\x_0 = 62.98[/tex]

Final answer:

To find specific percentiles for a normally distributed variable x with mean 56 and standard deviation 3, you must use a z-score table or calculator to find the corresponding z-scores for the 10%, 80%, and top 1% percentages, then use the formula x0 = µ + z*σ to calculate x0.

Explanation:

To find the value x0 of the normally distributed random variable x with mean µ = 56 and standard deviation σ = 3, that corresponds to specific percentiles, one would typically use a z-score table (or a calculator with a normal distribution function). However, in this scenario, the values provided for the x variable and the associated z-scores in the question are incorrect and would not provide a reasonable answer. Instead, I will explain the steps needed to find x0 without using the incorrect values provided.

Finding x0 for Each Given Percentile:

For the 10% percentile: Find the z-score that corresponds to a cumulative probability of 0.10.
For the 80% percentile: Find the z-score that corresponds to a cumulative probability of 0.80.
For the top 1% (greater than x0): Find the z-score that corresponds to a cumulative probability of 0.99 (since 99% will be less than x0, 1% will be greater).

After finding each z-score, use the formula x0 = µ + z*σ to calculate the corresponding x0 for each case.

Learn more about Normal Distribution here:

https://brainly.com/question/34741155

#SPJ3

please help. i have no idea where to start

Answers

Step-by-step explanation:

[tex] \because \triangle \: DEF \sim \triangle NPQ \\ \\ \therefore \: \frac{EF}{PQ} = \frac{DF}{NQ}... (csst) \\ \\ \therefore \: \frac{d}{ \frac{11}{2} } = \frac{7}{9} \\ \\ \therefore \: \frac{2d}{ 11 } = \frac{7}{9} \\ \\ \therefore \: d = \frac{11 \times 7}{2 \times 9} \\ \\ \therefore \: d = \frac{77}{18} \\ [/tex]

Answer:

77/18

Step-by-step explanation:

Similar figures have sides in the same ratio.

Ratio can be obtained using the ratio of DF/NQ

DF/NQ = 7/9

EF/PQ = 7/9

d/(11/2) = 7/9

d = 7/9 × 11/2

d = 77/18

Use the geometric definition of the cross product and the properties of the cross product to make the following calculations. (a) ((i⃗ +j⃗ )×i⃗ )×j⃗ = (b) (j⃗ +k⃗ )×(j⃗ ×k⃗ ) = (c) 4i⃗ ×(i⃗ +j⃗ ) = (d) (k⃗ +j⃗ )×(k⃗ −j⃗ ) =

Answers

Answer:

Step-by-step explanation:

we know

[tex]\vec{i}\times \vec{j}=\vec{k}[/tex]

[tex]\vec{j}\times \vec{k}=\vec{i}[/tex]

[tex]\vec{k}\times \vec{i}=\vec{j}[/tex]

(a)[tex]\left [ \left ( \hat{i}+\hat{j}\right )\times \hat{i}\right ]\times \hat{j}[/tex]

[tex]=\left [ \hat{i}\times \hat{i}+\hat{j}\times \hat{i}\right ]\times \hat{j}[/tex]

[tex]=\left [ 0-\hat{k}\right ]\times \hat{j}[/tex]

[tex]=\hat{i}[/tex]

(b)[tex]\left ( \hat{j}+\hat{k}\right )\times \left ( \hat{j}\times \hat{k}\right )[/tex]

[tex]=\left ( \hat{j}+\hat{k}\right )\times \left ( \hat{i}\right )[/tex]

[tex]=\hat{k}+\hat{j}[/tex]

(c)[tex]4\hat{i}\times \left ( \hat{i}+\hat{j}\right )[/tex]

[tex]=4\hat{i}\times \hat{i}+4\hat{i}\times \hat{j}[/tex]

[tex]=0+4\hat{k}[/tex]

(d)[tex]\left ( \hat{k}+\hat{j}\right )\times \left ( \hat{k}-\hat{j}\right )[/tex]

[tex]=\hat{k}\times \hat{k}-\hat{k}\times \hat{j}+\hat{j}\times \hat{k}-\hat{j}\times \hat{j}[/tex]

[tex]=0+\hat{i}+\hat{i}-0[/tex]

[tex]=2\hat{i}[/tex]

The direction of the cross product depends on the right-hand rule and the resulting cross-product is located on the plane that is perpendicular to the vectors undergoing the cross product.

Taking i, j, k as the unit vector along x, y, z-direction.

Since [tex]i \times i = 0[/tex] it implies the angle∠ between them is 0;

Then: sin(0) = 0

Also;

[tex]j \times j = 0 \\ \\ k\times k = 0[/tex]

Similarly, [tex]i \times j = k[/tex] which implies that the angle ∠ between them = 90°;

Then: sin (90°) = 1

Also;

[tex]j \times k= i \\ \\ k \times i = j[/tex]

[tex]j \times i = - k[/tex] which implies that the angle ∠ between them = -90° or 270°

Then; sin (-90) or Sin ( 270) = -1

Also;

[tex]i \times k = -j \\ \\ j \times i = -k[/tex]

As such i,  j, k are unit vectors for x, y, and z-axis.

To determine the following calculations, we have;

(a)

[tex]\Big ( ( i^{\to }+ j^{\to })\times i^{\to }\Big)\times j^{\to }[/tex]

[tex]= ( i^{\to } \times i^{\to } + j^{\to }\times i^{\to }) \times j^{\to }[/tex]

[tex]=(0 - k^{\to })\times j^{\to }[/tex]

[tex]= - k^{\to } \times j^{\to }\\\\= -(-i^{\to }) \\ \\ \mathbf{= i^{\to }}[/tex]

(b)

[tex](j^{\to }+ k^{\to }) \times (j^{\to } + k^{\to })[/tex]

[tex]= j^{\to } \times (j^{\to } \times k ) + k^{\to } \times (j \times k)\\ \\ = j^{\to } \times i^{\to } + k^{\to } \times i^{\to } \\ \\ \mathbf{ = -k^{\to } + j^{\to }}[/tex]

(c)

[tex]4i^{\to } \times (j \times k^{\to }) \\ \\ = 4 (i^{\to } \times i^{\to }) \\ \\ \mathbf{= 0}[/tex]

(d)

[tex](k^{\to} + j^{\to}) \times (k^{\to} - j^{\to})) \\ \\ =(k^{\to} \times k^{\to}) - (k^{\to} \times j^{\to})+(j^{\to} + k^{\to}) - (j^{\to} \times j^{\to}) \\ \\ = 0 + i^{\to} + i^{\to} -0 \\ \\ \mathbf{ = 2 i^{\to}}[/tex]

Therefore, we can conclude that the calculations of the cross-product are well defined from the above explanations.

Learn more about cross-product here:

https://brainly.com/question/16537974?referrer=searchResults

Find the probability for the experiment of tossing a six-sided die twice.
1. The sum is 4.
2. The sum is 6.
3. The sum is at least 7.
4. The sum is at least 8.
5. The sum is less than 11.
6. The sum is 2, 3, or 12.
7. The sum is odd and no more than 7.
8. The sum is odd or prime.

Answers

Answer:

1. 1/12 or 0.083

2. 5/36 or 0.1389

3. 7/12 or 0.5833

4. 5/12 or 0.4167

5. 11/12 or 0.9167

6. 1/9 or 0.1111

7. 1/3 or 0.3333

8. 5/12 or 0.4167

Step-by-step explanation:

This problem can easily be understood by making sample space first.

Outcomes in sample space=S={(1,1),(1,2),(1,3),(1,4),(1,5),(1,6),(2,1),(2,2),(2,3),(2,4),(2,5),(2,6),(3,1),(3,2),(3,3),(3,4),(3,5),(3,6),(4,1),(4,2),(4,3),(4,4),(4,5),(4,6),(5,1),(5,2),(5,3),(5,4),(5,5),(5,6),(6,1),(6,2),(6,3),(6,4),(6,5),(6,6)}

Total outcomes=36

The probability in the following scenario is calculated as

Probability=number of outcomes/Total outcomes

1.

The sum is 4

The sum is 4 ={(1,3),(2,2),(3,1)}

number of outcomes=3

P(The sum is 4)=3/36=1/12 or 0.083

2.

The sum is 6

The sum is 6 ={(1,5),(2,4),(3,3),(4,2),(5,1)}

number of outcomes=5

P(The sum is 6)=5/36 or 0.1389

3.

The sum is at least 7

The sum is at least 7=The sum is greater than or equal to 7

The sum is at least 7={(1,6),(2,5),(2,6),(3,4),(3,5),(3,6),(4,3),(4,4),(4,5),(4,6),(5,2),(5,3),(5,4),(5,5),(5,6),(6,1),(6,2),(6,3),(6,4),(6,5),(6,6)}

number of outcomes=21

P(The sum is at least 7)=21/36

P(The sum is at least 7)=7/12 or 0.5833

4.

The sum is at least 8

The sum is at least 8=The sum is greater than or equal to 8

The sum is at least 8={(2,6),(3,5),(3,6),(4,4),(4,5),(4,6),(5,3),(5,4),(5,5),(5,6),(6,2),(6,3),(6,4),(6,5),(6,6)}

number of outcomes=15

P(The sum is at least 8)=15/36

P(The sum is at least 8)=5/12 or 0.4167

5.

The sum is less than 11

The sum is less than 11={(1,1),(1,2),(1,3),(1,4),(1,5),(1,6),(2,1),(2,2),(2,3),(2,4),(2,5),(2,6),(3,1),(3,2),(3,3),(3,4),(3,5),(3,6),(4,1),(4,2),(4,3),(4,4),(4,5),(4,6),(5,1),(5,2),(5,3),(5,4),(5,5),(6,1),(6,2),(6,3),(6,4)}

number of outcomes=33

P(The sum is less than 11)=33/36

P(The sum is less than 11)=11/12 or 0.9167

6.

The sum is 2, 3, or 12

The sum is 2, 3, or 12={(1,1),(1,2),(2,1),(6,6)}

number of outcomes=4

P(The sum is 2, 3, or 12)=4/36

P(The sum is 2, 3, or 12)=1/9 or 0.1111

7.

The sum is odd and no more than 7

The sum is odd and no more than 7={(1,2),(1,4),(1,6),(2,1),(2,3),(2,5),(3,2),(3,4),(4,1),(4,3),(5,2),(6,1)}

number of outcomes=12

P(The sum is odd and no more than 7)=12/36

P(The sum is odd and no more than 7)=1/3 or 0.3333

8.

The sum is odd or prime

The sum is odd or prime={(1,1),(1,2),(1,4),(1,6),(2,1),(2,3),(2,5),(3,2),(3,4),(4,1),(4,3),(5,2),(5,6),(6,1),(6,5)}

number of outcomes=15

P(The sum is odd or prime)=15/36

P(The sum is odd or prime)=5/12 or 0.4167

Probabilities are,

1. The sum is 4 = 1/12

2. The sum is 6 = 5/36

3. The sum is at least 7 = 7/12

4. The sum is at least 8 = 5/12

5. The sum is less than 11 = 11/12

6. The sum is 2, 3, or 12 = 1/9

7. The sum is odd and no more than 7 = 1/3

8. The sum is odd or prime = 19/36

When six sided die toss two times, Then total possible Outcomes shown below

[tex](1,1),(1,2),(1,3),(1,4),(1,5),(1,6),(2,1),(2,2),(2,3),(2,4),(2,5),(2,6),\\\\(3,1),(3,2),(3,3),(3,4),(3,5),(3,6),(4,1),(4,2),(4,3),(4,4),(4,5),(4,6),\\\\(5,1),(5,2),(5,3),(5,4),(5,5),(5,6),(6,1),(6,2),(6,3),(6,4),(6,5),(6,6)}[/tex]

Total number of  outcomes=36

Probability is calculated by dividing number of favourable outcomes by Total number of  outcomes

1. Favourable outcomes for the sum is 4 [tex]={(1,3),(2,2),(3,1)}[/tex]

number of outcomes=3

The probability of The sum is 4. = [tex]3/36=1/12 = 0.083[/tex]

2.Favourable outcomes for the sum is 6[tex]={(1,5),(2,4),(3,3),(4,2),(5,1)}[/tex]

number of outcomes=5

The probability of The sum is 6, =5/36  

3.The sum is at least 7,

={(1,6),(2,5),(2,6),(3,4),(3,5),(3,6),(4,3),(4,4),(4,5),(4,6),(5,2),(5,3),(5,4),(5,5),(5,6),(6,1),(6,2),(6,3),(6,4),(6,5),(6,6)}

number of outcomes=21

Probability of the sum is at least 7 =21/36=7/12 = 0.5833

4.The sum is at least 8

The sum is at least 8={(2,6),(3,5),(3,6),(4,4),(4,5),(4,6),(5,3),(5,4),(5,5),(5,6),(6,2),(6,3),(6,4),(6,5),(6,6)}

number of outcomes=15

The sum is at least 8=15/36 = 5/12 = 0.4167

5.The sum is less than 11

The sum is less than 11={(1,1),(1,2),(1,3),(1,4),(1,5),(1,6),(2,1),(2,2),(2,3),(2,4),(2,5),(2,6),(3,1),(3,2),(3,3),(3,4),(3,5),(3,6),(4,1),(4,2),(4,3),(4,4),(4,5),(4,6),(5,1),(5,2),(5,3),(5,4),(5,5),(6,1),(6,2),(6,3),(6,4)}

number of outcomes=33

The sum is less than 11=33/36 = 11/12

6.The sum is 2, 3, or 12={(1,1),(1,2),(2,1),(6,6)}

number of outcomes=4

The sum is 2, 3, or 12=4/36 = 1/9

7.The sum is odd and no more than 7={(1,2),(1,4),(1,6),(2,1),(2,3),(2,5),(3,2),(3,4),(4,1),(4,3),(5,2),(6,1)}

number of outcomes=12

The sum is odd and no more than 7=12/36 = 1/3

8.The sum is odd or prime={(1,1),(1,2),(1,4),(1,6),(2,1),(2,3),(2,5),(3,2),(3,4),(4,1),(4,3),(5,2),(5,6),(6,1),(6,5), (3, 6), (6, 3), (4,5), (5, 4)

number of outcomes=19

The sum is odd or prime=19/36

Learn more:

https://brainly.com/question/23417919

Other Questions
Convert the value of the following binary numbers to hexadecimal notation. (Note: this question has 2 parts; you must answer each part correctly to receive full marks. Do not include spaces, commas or subscripts in your answer.) a. 11012 = b. 111011102 = The Dunkers are a religious group that moved from Germany to Pennsylvania in the mid-1700s. They do not marry with members outside their own immediate community. Today, the Dunkers are genetically unique and differ in gene frequencies, at many loci, from all other populations including those in their original homeland. Which of the following likely explains the genetic uniqueness of this population?A) population bottleneck and Hardy-Weinberg equilibriumB) heterozygote advantage and stabilizing selectionC) sexual selection and inbreeding depressionD) mutation and natural selectionE) founder effect and genetic drift Empress Wu took control of China after her husband, Emperor Taizong, died. She became known as a ruthless ruler of what dynasty? "Assume the average price of a laptop computer is $775 with a standard deviation of $75. The following data represent the prices of a sample of laptops at an electronics store. Calculate the z-score for each of the following prices" a. $699 b. $949 c. $625 d. $849 e. $999 Sam, whose mass is 79 kg, stands at the top of an 11-m-high, 120-m-long snow-covered slope. His skis have a coefficient of kinetic friction on the snow of 0.07. If he uses his poles to get started, then glides down, what is his speed at the bottom? Factor completely. x22x24 Enter your answer in the box. Beginning about 55 seconds into the video, you'll see an animation of a photographer looking through her camera at a man, a set of trees, and distant mountains. Notice that, as viewed through the camera, the positions of the man and the trees change (relative to distant mountains) as the photographer moves. Which of the following statements correctly describes what is really happening in this situation? For a certain mechanical element the constitutive relation is Y = AV^3, where Y is a system variable, a is a constant, and V is velocity. Give each answer below in terms of V. (a) If Y is the force, i.e. (Y = F), find an expression for the power in the element? (b) If Y is the linear momentum, i.e. (Y = p), find an expression for the energy stored in the element? are you looking for more points?? i will give you 20 What is the scientific definition of energy that relates it to work?the ability to use an applied force to make an object movethe ability to use the stored potential of an objectthe ability to use the change in temperature of an objectthe ability to use the change in direction of an object What type of triangle can a right triangle be? What is the name of a shape with its length, width, and height all equal? Webers law is most closely associated with ____. a.the just noticeable differenceb.the absolute thresholdc.sensory reductiond.sensory deprivation Alice and Tom dive from an overhang into the lake below. Tom simply drops straight down from the edge, but Alice takes a running start and jumps with an initial horizontal velocity of 25 m/s. Neither person experiences any significant air resistance. Just as they reach the lake belowA) the speed of Alice is larger than that of Tom.B) the splashdown speed of Alice is larger than that of Tom.C) they will both have the same speed.D) the speed of Tom will always be 9.8 m/s larger than that of Alice.E) the speed of Alice will always be 25 m/s larger than that of Tom. A man invests his savings in two accounts, one paying 6% and the other paying 10% simple interest per year. He puts twice as much in the lower-yielding account because it is less risky. His annual interest is $3872 dollars. How much did he invest at each rate? Your answer is: Amount invested at 6% equals $ Amount invested at 10% equals $ Experimental participants were primed for a high-performance goal designed to motivate them to perform well on a puzzle-solving task. The experimental participants, however, were not aware of this priming procedure. Control participants were not primed. The results of the puzzle task showed that compared to control participants, experimental participants ________. 6. {THROWBACK!!) A sample of CO2 gas has a volume of 145 Lat STP. How many grams of CO2 are in this sample? From the information available, which of the followingexamples are likely to be good opportunities? (Select fiveanswers.)Savannah notices that there are no dry cleaning shopsin her area, even though there are manybusinesspeople who would use one, so she decides toppen her own.Umiko determines that the startup costs for her ice creamshop idea will be high, and it isn't likely to be profitableLei wants to start a nature tour business because sheloves the outdoors.Caesar decides to start a Web business with very low startupcosts, so it can become profitable quickly.Garrett wants to start a lawn care business, but there arealready a lot of popular lawn care companies in his area.Julian notices that there is a demand for swimming lessons incommunity, but he doesn't like to swim.Onawa knows scarves are currently popular with teenagers at herschool, so when she sees a special type of scarf when she is onvacation in another country, she buys a lot of them and takes themback to sell at her school.Cordell wants to start a face painting business for children'sparties, and he knows many parents in his community who saythey would hire him for their events.Angie loves exotic birds and wants to start a service for trainingthem, but there are not many people with exotic birds in hercommunity Can someone pleaseeee answer this !!!!!! If the volume of one drop is 0.031 mL according to Stu Dents measurement, approximately what volume would 22 drops be? Answer with two significant digits and units of mL.