Suppose that a certain drug company manufactured a compound that had nearly the same structure as a substrate for a certain enzyme but that could not be acted upon chemically by the enzyme. What type of interaction would the compound have with the enzyme

Answer: palladium plays the role of catalyst

Explanation:

Answer: It is a catalyst

Explanation:

Answer:

                     The ¹³C-NMR Spectrum of  tert-butyl alcohol will show only two signals.

(i) Signal at around 31 ppm:

                                              This signal towards upfield is for the carbon atoms which are more shielded and are having rich electron surroundings. The height of peak at y-axis shows the number of carbon atoms as compared to other peaks. In this case it is three times the height of second signal hence, it shows that this peak corresponds to three carbon atoms.

(ii) Signal at around 70 ppm:

                                              This signal towards downfield is for the carbon atom which is more deshielded and is having electron deficient surrounding. As compared to the second signal the height of this peaks corresponds to only one carbon. And the deshielded environment shows that this carbon is directly attached to an electronegative element.

A simulated proton-decoupled 13C NMR spectrum for tert-butyl alcohol would present two distinct peaks reflecting the two types of carbon environments within the molecule. Given that it's a proton-decoupled spectrum, the peaks would exist as singlets, not split into multiplets due to hydrogen atom influence.

The student's question concerns the simulated construction of a proton-decoupled 13C NMR spectrum for tert-butyl alcohol. In a substance such as tert-butyl alcohol, the symmetry of the molecule helps in predicting the NMR spectrum. Tert-butyl alcohol (t-BuOH) consists of a central carbon atom attached to three methyl groups (CH3) and one OH group.

When such alcohol is subjected to 13C NMR spectroscopy, the central carbon atom attached to the three methyl groups gives rise to one distinct peak in the spectrum due to the identical chemical environment. The carbon of the OH group will give a separate peak in the spectrum as it's in a different chemical environment.

Owing to the spin-spin coupling effect, in proton-coupled 13C NMR spectra, each peak would be split into a multiplet by any hydrogen atoms bonded to the carbon. But, since we are considering a proton-decoupled spectrum here, such multiplet structure would not be seen, and we would have simple singlets at the relevant shifts due to the two types of carbons present in the molecule.

https://brainly.com/question/32133167

#SPJ11

Final answer:

To form 3-phenyl-2-pentene from 3-pentanone, phenylmagnesium bromide (PhMgBr) is used to introduce the phenyl group, then acid (H3O+) protonates the alkoxide to form an alcohol, followed by acidic dehydration (H2SO4, Δ) to eliminate water and form the double bond. The answer is e followed by b.

Explanation:

To convert 3-pentanone to 3-phenyl-2-pentene, we'll need to form a new carbon-carbon bond and then eliminate a carbonyl group while introducing a double bond. The first step is the Grignard reaction to introduce the phenyl group. We use phenylmagnesium bromide (PhMgBr) as the Grignard reagent to attack the carbonyl carbon of 3-pentanone and then protonate the resulting alkoxide with acid (H3O+) to give 3-phenyl-3-pentanol. The next step is to eliminate water from the alcohol to form the desired double bond. This is done by using acidic dehydration (H2SO4, Δ) to yield 3-phenyl-2-pentene. Therefore, the correct order of reagents is e followed by b.

The correct answer is f, e, d. The correct sequence of reagents to synthesize 3-phenyl-2-pentene from 3-pentanone is f (PhMgBr), followed by e (H3O+), and then d (H3O+ for hydrolysis and elimination).

To synthesize 3-phenyl-2-pentene from 3-pentanone, we can follow a multi-step transformation process involving the given reagents. Here's the step-by-step

1. Phenylmagnesium bromide (PhMgBr) - Reagent e:

 The first step involves the formation of a Grignard reagent by reacting 3-pentanone with phenylmagnesium bromide. This reaction will result in the addition of a phenyl group to the carbonyl carbon of 3-pentanone, forming a tertiary alcohol with a phenyl group attached to the carbon adjacent to the hydroxyl group.

 The reaction can be represented as follows:

[tex]\[ \text{CH}_3\text{CH}_2\text{CH}_2\text{COR} + \text{PhMgBr} \rightarrow \text{CH}_3\text{CH}_2\text{CH}(\text{OH})\text{CH}(\text{Ph})\text{R} \][/tex]

 Note that R represents the rest of the molecule.

2. Water (H3O+) - Reagent d (Step 2):

 The second step is the hydrolysis of the Grignard reaction product. The tertiary alcohol formed in the first step is protonated by water, which is acidic in nature (H3O+), to form a good leaving group (water). This sets up the next step, which is an elimination reaction.

 The reaction can be represented as follows:

[tex]\[ \text{CH}_3\text{CH}_2\text{CH}(\text{OH})\text{CH}(\text{Ph})\text{R} + \text{H}_2\text{O} \rightarrow \text{CH}_3\text{CH}_2\text{C}=\text{CHCH}(\text{Ph})\text{R} + \text{H}_2\text{O} \][/tex]

 This step results in the formation of an alkene, specifically 3-phenyl-2-pentene, through an E1 or E2 elimination mechanism.

The other reagents listed in the question are not suitable for the synthesis of 3-phenyl-2-pentene from 3-pentanone:

- H2 / Pt (Reagent a): This would reduce the ketone to an alcohol, which is not the desired transformation.

- H2SO4,  (Reagent b): This would lead to dehydration of the ketone, but not in a controlled manner to give the desired alkene.

- OsO4, H2O2 (Reagent c): This would oxidize the ketone to a diol, which is not on the pathway to the desired product.

- RCO3H (Reagent g): This is a reagent for the oxidation of primary alcohols to carboxylic acids and would not be useful in this synthesis.

- CH3MgBr, H3O+ (Reagent d): Methylmagnesium bromide would add a methyl group to the ketone, which is not what we want for the synthesis of 3-phenyl-2-pentene.

- KOH (Reagent h): While KOH could be used to deprotonate the alpha-hydrogen to form an enolate, which could then react with an electrophile, it is not the reagent of choice for the synthesis of 3-phenyl-2-pentene from 3-pentanone.

Therefore, the correct sequence of reagents to synthesize 3-phenyl-2-pentene from 3-pentanone is f (PhMgBr), followed by e (H3O+), and then d (H3O+ for hydrolysis and elimination).

Answer:

Hello, the above question is not complete, nonetheless let us check somethings out.

Explanation:

Paleothermometer definition is from two words, that is "Paleo" which means something that is old and ''thermometer" which is an instrument for measuring temperature. So, if we add this up, Paleothermometer is an instrument for measuring "old" temperature, that is temperature. One of the Paleothermometer that is been used is the δ18O which is the one in the question that has isotopic ratio of 18O/16O, and it deals with the measurement of 18O to 16O. The others include Alkenones Paleothermometer, Mg/Ca Paleothermometer, Leaf physiognomy and so on.

If the values of the isotopic ratio that is 18O/16O ratio is low, then the temperature is high. To Calculate the 18O/16O ratio for ancient ocean then we will be using the equation below;

δ18O = (z - 1) × 1000. Where z= [(18O/16O)/( 18O/16O)sm. And sm= standard mean.

Answer:

. 1. This amino acid has a positively charged R group: ARGININE

2. This amino acid has a negatively charged R group: ASPARTATE

3. This amino acid has a neutral polar R group: NONE

4. This amino acid has a nonpolar aliphatic R: VALINE

5. This amino acid has an aromatic R group: TRYTOPHAN

Explanation:

1) Arginine contains an extra amino group bearing a positive charge, in its chain which imparts basic properties to it

2) Aspartate contains an extra carboxyl group with a dissociable protron. Once the Protron is dissociated, it carries an extra negative charge in its side chain (R)

3) NONE of the amino acids given belong to this group because amino acids with neutral polar R groups contain functional groups that form hydrogen bonds with water. But, this is not the case with tryptophan aspartate valine or arginine

4) Valine has a R group that is hydrocarbon in nature and thus hydrophobic.

5) Trytophan has a benzene ring in its side chain

Amino acids are classified by the properties of their R groups at pH 7 to be arginine (positively charged), aspartate (negatively charged), valine (neutral polar and nonpolar aliphatic) and tryptophan (aromatic).

The chemical properties of an amino acid's side chain, or R group can be identified with their characteristics at pH 7. Here are each of the amino acids classified by the properties of their R groups at pH 7:

https://brainly.com/question/31872499

#SPJ3

Answer:

0.104 M

Explanation:

A saline solution contains 0.770 g of NaCl (molar mass = 58.55 g/mol) in 133 mL.

The molar mass of the solute (NaCl) is 58.55 g/mol. The moles corresponding to 0.770 g are:

0.770 g × (1 mol/55.85 g) = 0.0138 mol

The volume of solution is 133 mL. In liters,

133 mL × (1 L/1000 mL) = 0.133 L

The molarity of NaCl is:

M = moles of solute / liters of solution

M = 0.0138 mol / 0.133 L

M = 0.104 M

Answer: E = 2.455 x 10^5 N/C

Explanation:

q1 = 1.2x10^-7C

q2 = 6.2x10^-8C

Electric field, E = kQ/r²

where k = 9.0x10^9

since the location is (27 - 5)cm from q1

hence electric field, E1 = k*q1/r²

E1= (9x10^9 x 1.2x10^-7)/(0.22)² = 22314.05 N/C

for q2:

E1 = k*q2/r²

E2 at 5cm

E2 = (9x10^9 x 6.2x10^-8)/(0.05)² = 223200 N/C

Hence, the total electric field at 5cm position is

E = E1 + E2

E = 22314.05 + 223200 = 245514.05 N/C

E = 2.455 x 10^5 N/C

Final answer:

The electric field at a point 5.0 cm from a negative charge is calculated using the formula E = kQ/r² with the direction toward the charge.

Explanation:

q1 = 1.2x10⁻⁷ C

q2 = 6.2x10⁻⁸C

Electric field, E = kQ/r²

where k = 9.0x10⁹

since the location is (27 - 5)cm from q1

hence electric field, E1 = k×q1/r²

E1= (9x10⁹ x 1.2x10⁻⁷)/(0.22)² = 22314.05 N/C

for q2:

E1 = k×q2/r²

E2 at 5cm

E2 = (9x10⁹ x 6.2x10⁻⁸)/(0.05)² = 223200 N/C

Hence, the total electric field at 5cm position is

E = E1 + E2

E = 22314.05 + 223200 = 245514.05 N/C

E = 2.455 x 10⁵ N/C

Answer: The mass of excess reagent (ammonium chloride) remained after the reaction is 62.7 grams

Explanation:

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]      .....(1)

Given mass of aluminium nitrite = 27.4 g

Molar mass of aluminium nitrite = 41 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of aluminium nitrite}=\frac{27.4g}{41g/mol}=0.668mol[/tex]

Given mass of ammonium chloride = 169.9 g

Molar mass of ammonium chloride = 53.5 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of ammonium chloride}=\frac{169.9g}{53.5g/mol}=3.176mol[/tex]

The chemical equation for the reaction of aluminium nitrite and ammonium chloride follows:

[tex]Al(NO_2)_3+3NH_4Cl\rightarrow AlCl_3+3N_2+6H_2O[/tex]

By Stoichiometry of the reaction:

1 mole of aluminium nitrite reacts with 3 moles of ammonium chloride

So, 0.668 moles of aluminium nitrite will react with = [tex]\frac{3}{1}\times 0.668=2.004mol[/tex] of ammonium chloride.

As, given amount of ammonium chloride is more than the required amount. So, it is considered as an excess reagent.

Thus, aluminium nitrite is considered as a limiting reagent because it limits the formation of product.

Excess moles of ammonium chloride = (3.176 - 2.004) mol = 1.172 moles

Calculating the mass of ammonium chloride by using equation 1, we get:

Excess moles of ammonium chloride = 1.172 moles

Molar mass of ammonium chloride = 53.5 g/mol

Putting values in equation 1, we get:

[tex]1.172mol=\frac{\text{Mass of ammonium chloride}}{53.5g/mol}\\\\\text{Mass of ammonium chloride}=(1.172mol\times 53.5g/mol)=62.7g[/tex]

Hence, the mass of excess reagent (ammonium chloride) remained after the reaction is 62.7 grams

Answer: Electronic geometry is tetrahedral and the molecular geometry will be trigonal pyramidal.

Explanation:

According to VSEPR theory:

Number of electron pairs =[tex]\frac{1}{2}[V+N-C+A][/tex]

For [tex]NH_3[/tex]

where,

V = number of valence electrons present in central nitrogen atom = 5

N = number of monovalent atoms = 3

C = charge of cation = 0

A = charge of anion = 0

Number of electron pairs =[tex]\frac{1}{2}[5+3-0+0]=4[/tex]

The number of electron pairs is 4 that means the hybridization will be [tex]sp^3[/tex] but as only 3 atoms are present , one position will be occupied by a lone pair thus electronic geometry is tetrahedral and the molecular geometry will be trigonal pyramidal.

Ammonia (NH3) has tetrahedral electron geometry and a trigonal pyramidal molecular geometry. This is due to the presence of three hydrogen atoms and one lone pair of electrons surrounding the central nitrogen atom. The presence of the lone pair slightly distorts the ideal tetrahedral angle, making the molecule trigonal pyramidal.

The electron geometry and the molecular geometry of ammonia (NH3) are respectively tetrahedral and trigonal pyramidal. In ammonia, the electron pair geometry, which includes both bonding electrons and lone pairs, is tetrahedral due to four pairs of electrons around the nitrogen atom (three bonding pairs and one lone pair).

However, the molecular geometry, which describes the spatial arrangement of the atoms, is trigonal pyramidal, as the nitrogen atom is at the apex and the three hydrogen atoms form the base. The ideal bond angles deviate slightly from the idealized angles because the lone pair takes up a larger region of space than the bonding electrons, causing the hydrogen-nitrogen-hydrogen angle (H-N-H) to be slightly smaller than the 109.5° angle in a regular tetrahedral structure.

https://brainly.com/question/13154566

#SPJ11

Answer:

Molarity for the solution is 1.05 mol/L

Explanation:

Mole fraction of solute = 0.0194

Solution's density = 1.0627 g/mL

We must know that sum of mole fraction = 1

Mole fraction of solute + Mole fraction of solvent = 1

0.0194 + Mole fraction of solvent = 1

Mole fraction of solvent = 1 - 0.0194 → 0.9806

Molarity is mol of solute in 1L of solution, so we have to determine solution's volume in L

With molar mass we can determine the mass of solute and solvent and then, the solution's mass

0.0194 mol . 101.1 g/ mol = 1.96 g of non electrolyte solute

0.9806 mol . 18 g/mol = 17.65 g of water

Mass of solution = mass of solute + mass of solvent

1.96 g + 17.65 g = 19.6 g (mass of solution)

Solution's density = Solution's mass / Solution's volume

1.0627 g/mL = 19.6 g / Solution's volume

Solution's volume = 19.6 g / 1.0627 g/mol →18.4 mL

Let's convert the mass from mL to L

18.4mL . 1L / 1000 mL = 0.0184 L

We have the moles of solute, so let's determine molarity

mol/L → 0.0194 mol / 0.0184 L =  1.05 M

Answer:

A.

Explanation:

The priority order from highest to lowest for the given groups according to the Cahn-Ingold-Prelog (CIP) rules is tert-butyl, propyl, ethyl, and methyl, based on the number of carbons and degree of substitution.

In the context of organic chemistry, we use the Cahn-Ingold-Prelog (CIP) priority rules to determine the order of substituents for naming compounds using the E/Z system. To rank the given groups by their priority, we consider the atomic number of the atoms directly attached to the double bond or chiral center. The higher the atomic number, the higher the priority.

The given groups are as follows:

Based on the CIP rules, the priority order is determined by the number of carbons in the alkyl chain or the degree of substitution. Therefore, we can rank these groups from highest priority to lowest priority as follows:

Final answer:

The overall reaction for converting coal to methane is 2C(s) + 2H2O(g) → CH4(g) + CO2(g). The ΔH°rxn for the overall process is -117.3 kJ. Using the molar mass of coal and the heat of combustion for methane, the total heat for gasifying 6.28 kg of coal and burning the resulting methane is calculated.

Explanation:

To answer the student's question regarding the production of methane from coal via gasification, we combine the given reactions to find the overall reaction:

The H2O(g) and CO(g) appear on both sides of the above equations and can be cancelled out when added together. The overall reaction is:

2C(s) + 2H2O(g) → CH4(g) + CO2(g)

To calculate ΔH°rxn for the overall reaction, we sum the enthalpies of the individual steps:

ΔH°rxn (overall) = 129.7 kJ + (-41 kJ) + (-206 kJ) = -117.3 kJ

Using the heat of combustion for methane, 890.4 kJ/mol, and the assumption that coal is approximated as pure carbon (12.00 g/mol), we can calculate the total heat for gasifying 6.28 kg of coal and then burning the methane produced:

Moles of C in 6.28 kg = (6280 g) / (12.00 g/mol) = 523.33 mol

Total heat from gasification = 523.33 mol × -117.3 kJ/mol = -61411.3 kJ

Total heat from combustion = 523.33 mol × 890.4 kJ/mol = 465774.9 kJ

The total heat for the entire process is the sum of heat from gasification and combustion.

The energy of attraction between a cation with a valence of 1 and an anion with a valence of 3 can be calculated using Coulomb's law.

The energy of attraction between a cation and an anion can be calculated using Coulomb's law. Coulomb's law states that the energy of attraction is directly proportional to the product of the charges and inversely proportional to the distance between them. In this case, the cation has a valence of +1 and the anion has a valence of -3. The distance between their centers is given as 7.5 nm. The equation to calculate the energy of attraction is:

E = k * (q1 * q2) / r

Where E is the energy of attraction, k is Coulomb's constant (9 x 10^9 Nm^2/C^2), q1 and q2 are the charges of the cation and anion respectively, and r is the distance between their centers.

Substituting the values:

E = (9 x 10^9 Nm^2/C^2) * ((+1) * (-3)) / (7.5 x 10^-9 m)

Simplifying the equation gives:

E = -36 Nm

https://brainly.com/question/31865959

#SPJ3

Explanation:

Equation of the reaction:

2KMnO4(aq) + 16HCl(aq) --> 2MnCl2(aq) + 2KCl(aq) + 5Cl2(g) + 8H2O(aq)

To calculate the limiting reagent, we need to calculate the number of moles of the reactants :

KMnO4:

Molar mass = (39 + 55 + (16*4))

= 158 g/mol

Number of moles = mass/molar mass

= 229.19/158

= 1.4506 mol

HCl:

Molar mass = 1 + 35.5

= 36.5 g/mol

Number of moles = 526.64/36.5

= 14.428 mol

By stoichiometry, 2 moles of KMnO4 reacted with 16 moles of HCl

The limiting reagent :

14.428 moles of HCl * 2 moles of KMnO4/16moles of HCl

= 1.8035 moles of KMnO4 is required to react with 14.428 moles of HCl

But there's 1.4506 moles of KMnO4. Therefore, KMnO4 is the limiting reagent.

Mass of the products:

KCl:

2 moles of KMnO4 will produce 2 moles of KCl

Moles of KCl = 1 * 1.4506 mol

= 1.4506 mol

Molar mass = 39 + 35.5 = 74.5 g/mol

Mass of KCl = 74.5 * 1.4506

= 108.07 g

MnCl2:

2 moles of KMnO4 will produce 2 moles of MnCl2

Number of moles of MnCl2 = 1 * 1.4506

= 1.4506 mol

Molar mass = 55 + (35.5*2)

= 126 g/mol

Mass of MnCl2= 1.4506 * 126

= 182.78 g

Cl2:

2 moles of KMnO4 will produce 5 moles of Cl2

Number of moles of Cl2 = 5/2 * 1.4506

= 3.6265 mol

Molar mass of Cl2 = 35.5*2

= 71 g/mol

Mass of Cl2 = 71* 3.6265

= 257.4815 g

H2O:

2 moles of KMnO4 will produce 8 moles of H2O

Number of moles of H2O = 8/2 * 1.4506

= 5.80 mol

Molar mass of H2O =( 1*2) + 16

= 18 g/mol

Mass of H2O = 18*5.80

= 104.44 g

Answer:

(1) mass of KCl =108.025g

(2) mass of MnCl2 =182.7 g

(3) mass of Cl2 =257.37 g

(4) mass of H20(water) =104.4g

Explanation:

we start with determining the limiting factor

molar mass of KMnO4 = 158g/mol

molar mass of HCl = 36.5g/mol

hence,

number of moles of KMnO4= mass /molar mass

number of moles of KMnO4= 229.19/158 = 1.45moles

number of moles of HCl = 526.64/36.5 = 14.43 moles

we chose the lowest number of moles from the reactants as the limiting factor

hence the limiting factor is KMnO4.

calculating the mass of the products:

for KCl

2moles of KMnO4 reacts to give 2moles of KCl

there for KCl contains 1.45moles

(1) mass of KCl = number of moles of KCl x molar mass of KCl = 1.45 x 74.5 = 108.025g

(2) from mole ratio 2 mole of KMnO4 gave 2 moles of MnCl2

therefore 1.45moles KMnO4 will give 1.45 MnCl2

mass of MnCl2 = 1.45moles x molar mass MnCl2 = 1.45 x 126 = 182.7 g

(3) from mole ratio

2moles KMnO4 gave 5moles Cl2

1.45 moles will give (5 x1.45)/2 moles of Cl2

mass of Cl2 = number of moles of Cl2 x molar mass Cl2 = 3.625 x 71 = 257.37 g

(4)from mole ratio

2moles KMnO4 gave 8moles water(H2O)

1.45 moles will give (1.45x 8)/2 moles of H20

mass of H2O produced = number of moles of H20 x the molar mass of H20 = 5.8 x 18 = 104.4g

Answer:

The correct answer is d.

Incorrect Answers:

Options a, b and c are incorrect answers because during folding of protein, surface area decreases and so there are less water molecules involved.The water molecules are free.The protein folding decreases entropy

Answer: The average atomic mass of X is 28.09 amu

Explanation:

Average atomic mass of an element is defined as the sum of masses of each isotope each multiplied by their natural fractional abundance.

Formula used to calculate average atomic mass follows:

[tex]\text{Average atomic mass }=\sum_{i=1}^n\text{(Atomic mass of an isotopes)}_i\times \text{(Fractional abundance})_i[/tex] .....(1)

Mass of isotope 1 = 27.979 amu

Percentage abundance of isotope 1 = 92.21 %

Fractional abundance of isotope 1 = 0.9212

Mass of isotope 2 = 28.976 amu

Percentage abundance of isotope 2 = 4.70 %

Fractional abundance of isotope 2 = 0.0470

Mass of isotope 3 = 29.974 amu

Percentage abundance of isotope 3 = 3.09 %

Fractional abundance of isotope 3 = 0.0309

Putting values in equation 1, we get:

[tex]\text{Average atomic mass of X}=[(27.979\times 0.9212)+(28.976\times 0.0470)+(29.974\times 0.0309)][/tex]

[tex]\text{Average atomic mass of X}=28.09amu[/tex]

Hence, the average atomic mass of X is 28.09 amu

The atomic weight of element X is approximately 28.04 amu.

The atomic weight of an element is calculated by taking into account the masses of its isotopes and their abundances. To calculate the atomic weight of element X, we multiply the mass of each isotope by its abundance and sum the results. Using the given data, we can calculate it as follows:

Therefore, the atomic weight of element X is approximately 28.04 amu.

https://brainly.com/question/31780867

#SPJ3

Answer:

Molar mass of unknown gas = 41.45 g/mol

Explanation:

Time taken for a gas to effuse/diffuse ∝√(Molar Mass of the gas)

Let T₁ be the time taken for the Unknown gas to effuse. T₁ = 7.3 min = 438s

Let T₂ be the time taken for the Nitrogen gas to effuse. T₁ = 6 min = 360s

(T₁/T₂) = √(Molar mass of unknown gas/Molar mass of Nitrogen)

Molar mass of Nitrogen = 2×14 = 28 g/mol

(438/360) = √(Molar Mass of unknown gas/28)

√(Molar mass of unknown gas/28) = 1.21667

molar mass of unknown gas/28 = 1.21667² = 1.4803

Molar mass of unknown gas = 1.4803 × 28 = 41.45 g/mol

Hope this helps!

Answer:

48.32 g of anhydrous MnSO4.

Explanation:

Equation of dehydration reaction:

MnSO4 •4H2O --> MnSO4 + 4H2O

Molar mass = 55 + 32 + (4*16) + 4((1*2) + 16)

= 223 g/mol

Mass of MnSO4 • 4H2O = 71.6 g

Number of moles = mass/molar mass

= 71.6/223

= 0.32 mol.

By stoichiometry, since 1 mole of MnSO4 •4H2O is dehydrated to give 1 mole of anhydrous MnSO4

Number of moles of MnSO4 = 0.32 mol.

Molar mass = 55 + 32 + (4*16)

= 151 g/mol.

Mass = 151 * 0.32

= 48.32 g of anhydrous MnSO4.

Answer:

2

Explanation:

The pressure at 34ft is the atmospheric pressure (1 atm) plus 1 atm, because at each 34ft the pressure increase by 1 atm, so it will be 2 atm. Let's assume that the lungs will be at a constant temperature, so, by the ideal gas law:

P1*V1 = P2*V2

Where P is the pressure, V is the volume, 1 is the state at 34 ft under the water, and 2 at the water surface, where P2 = 1atm. Thus:

2*V1 = 1*V2

V2 = 2V1

Thus, the volume will change by a factor of 2, so, the volume will double.

A scuba diver's lungs volume will double upon ascending to the surface from a depth of 34 ft without exhaling, due to the decrease in pressure as explained by Boyle's Law.

When a scuba diver ascends from a depth of 34 ft in fresh water to the surface, the pressure experienced by the diver changes significantly, which according to Boyle's Law, affects the volume of the diver's lungs. At a depth of 34 ft, the diver experiences a pressure of 2 ata (1 atm from the water plus 1 atm from the atmosphere). Boyle's Law states that at constant temperature, the volume of a gas is inversely proportional to the pressure exerted on it. Therefore, if the diver does not exhale during ascent, the volume of the diver's lungs will double upon arrival at the surface where the pressure is 1 atm. This understanding is critical to avoid potential injury such as lung overexpansion, known as pulmonary barotrauma, and to also mitigate the risks associated with decompression sickness (DCS).

Answer : The concentration of AB after 14.0 s is, 0.29 M

Explanation :

The expression used for second order kinetics is:

[tex]kt=\frac{1}{[A_t]}-\frac{1}{[A_o]}[/tex]

where,

k = rate constant = [tex]0.20M^{-1}s^{-1}[/tex]

t = time = 14.0 s

[tex][A_t][/tex] = final concentration = ?

[tex][A_o][/tex] = initial concentration = 1.50 M

Now put all the given values in the above expression, we get:

[tex]0.20\times 14.0=\frac{1}{[A_t]}-\frac{1}{1.50}[/tex]

[tex][A_t]=0.29M[/tex]

Therefore, the concentration of AB after 14.0 s is, 0.29 M

Answer:

713.51 N/m

Explanation:

Hook's Law: This law states that provided the elastic limit is not exceeded, the extension in an elastic material is directly proportional to the applied force.

From hook's law,

F = ke ...........................Equation 1

Where F = Force exerted on the bowstring, e = Extension/compression of the bowstring, k = Spring constant of the bow.

Make k the subject of the equation,

k = F/e ............................ Equation 2

Given: F = 264 N, e = 0.37 m.

Substitute into equation 2

k = 264/0.37

k = 713.51 N/m

Hence the spring constant of the bow  = 713.51 N/m

Answer:vv

[tex]v=2.17\times 10^{-26}\ m/s[/tex]

Explanation:

The expression for the deBroglie wavelength is:

[tex]\lambda=\frac {h}{m\times v}[/tex]

Where,  

[tex]\lambda[/tex] is the deBroglie wavelength  

h is Plank's constant having value [tex]6.626\times 10^{-34}\ Js[/tex]

m is the mass of = [tex]56.5\ g=0.0565\ kg[/tex]

v is the speed.

Wavelength = 5400 Å = [tex]5400\times 10^{-10}\ m[/tex]

Applying in the equation as:-

[tex]5400\times 10^{-10}=\frac{6.626\times 10^{-34}}{0.0565\times v}[/tex]

[tex]v=\frac{331300000}{10^{34}\times \:1.5255}\ m/s[/tex]

[tex]v=2.17\times 10^{-26}\ m/s[/tex]

Explanation:

the correct match can as follows:

1.  helium ⇒ discrete atoms (helium is an inert gas)

2. oxygen ⇒ molecules (oxygen exists in molecular form as O2)

3 Magnesium ⇒ matalic lattice ( Magnesium is a metal FCC crystal Structure :) )

4 Aluminum⇒ covalent network (since it is situated in the middle of the group and posses amphoteric properties too)

Final answer:

To classify the elements: Calcium and Potassium form metallic lattices (category C), Helium exists as discrete atoms (category A), and Sulfur forms molecules (category B). This is due to how the atoms or molecules arrange themselves in solids, often driven by forces between electrons and nuclei.

Explanation:

To classify each element in its elemental form based on the given key:

Calcium (Ca) would fall into category C, Metallic lattice, as it is a metal and metals typically form extended, repeating three-dimensional patterns.

Helium (He) is correctly classified as A, Discrete atoms, because it exists as individual atoms and does not form bonds easily.

Sulfur (S) in its most common form consists of eight-atom rings, making it B, Molecules.

Potassium (K), like calcium, would also be categorized as C, Metallic lattice, due to its metal characteristics, forming a crystal lattice.

Atoms arrange themselves in these structures based on the net attractive forces between electrons and atomic nuclei, and the structural arrangement significantly affects the properties of the material, such as malleability and ductility for metals. Pure metals are crystalline solids with metal atoms packed in a repeating pattern known as a unit cell.

Answer:

Explanation:

Gases are unlike other states of matter in that a gas expands to fill the shape and volume of its container. For a small amount of helium gas transferred from the tank to the balloon, the gas(helium) expands and fills up the entire mass of the balloon.

According to the kinetic theory, gases can also be compressed(that's the reason why the metal cylinder can hold the helium gas) so that a relatively large amount of gas can be forced into a small container.

The kinetic-molecular theory explains why gases are more compressible and expands more than either liquids or solids. Gases can expands to take the shape of the container in which they are in, unlike liquids and solids. This is responsible for in this case, why helium gas introduced to the balloon fills up the balloon.

Answer:

Al(NO₃)₃ →  Al³⁺ (aq)  +  3NO₃⁻ (aq)

FeCl₂ → Fe²⁺ (aq) +  2Cl⁻ (aq)

K₂S → 2K⁺ (aq) +  S⁻²(aq)

Mg(CH3COO)₂ → Mg²⁺ (aq) + 2CH3COO⁻ (aq)

(NH₄)₃PO₄ → 3NH₄⁺ (aq) + PO₄⁻³(aq)

Explanation:

Al(NO₃)₃ → Aluminum nitrate

FeCl₂ → Iron (II) chloride

K₂S → Potassium sulfide

Mg(CH3COO)₂ → Magnesium acetate

(NH₄)₃PO₄ → Ammonium phosphate

Answer:

0.009 moles

Explanation:

Using integrated rate law for first order kinetics as:

[tex][A_t]=[A_0]e^{-kt}[/tex]

Where,  

[tex][A_t][/tex] is the concentration at time t

[tex][A_0][/tex] is the initial concentration

Given that:

The rate constant, k = [tex]6.8\times 10^{-3}[/tex] s⁻¹

Initial concentration [tex][A_0][/tex] = 0.0250 mol

Final concentration [tex][A_t][/tex] = ?

Time = 2.5 min = 2.5 x 60 seconds = 150 sec

Applying in the above equation, we get that:-

[tex][A_t]=0.0250e^{-6.8\times 10^{-3}\times 150}\ moles=0.025\times \frac{1}{e^{\frac{51}{50}}}\ moles=\frac{0.025}{2.77319}\ moles=0.009\ moles[/tex]

Answer:

S: [Ne] 3s² 3p⁴

[Ar] 3d¹⁰ 4s² 4p⁶

[Xe] 6s1

Explanation:

The electronic configuration in ground state

Final answer:

To find the molality, multiply the density by 1000 to get the total mass of the solution per liter, subtract the mass of dissolved sucrose, and finally divide the moles of sucrose by the kilograms of water.

Explanation:

To calculate the molality of a 3.1416 M aqueous solution of sucrose with a density of 1.5986 g/mL, we follow these steps:

Answer:

Explanation:

Equation of the reaction:

NaOH(aq) + KHC8H4O4(aq) --> KNaC8H4O4(aq) + H2O(l)

A.

Number of moles = mass/molar mass

= 0.20/204.22

= 9.79 x 10-4 mol KHP

By stoichiometry, 1 mole of NaOH reacts with 1 mole of KHP

= 6.267 x 10-4 mol NaOH

Molar concentration = number of moles/volume

= 9.79 x 10-4/0.00953

= 0.103 M NaOH

B.

Number of moles of kool aid = mass/molar mass

= 3.607/342

= 0.01055 mol

Concentration = 0.01055/0.005

= 2.1 M

C1 * V1 = C2 * V2

Concentration of NaOH = 2.1 * 0.005/0.01079

= 0.977 M

Number of moles of NaOH = 0.0105 mol.

Answer:

There are 0.00523 moles of oxygen in 0.150 grams of calcium sulfate crystal.

Explanation:

Mass of calcium sulfate crystal = m = 0.150 g

Molar mass of calcium sulfate crystal = M = 172 g/mol

Moles of magnesium nitrate = n

[tex]n=\frac{m}{M}[/tex]

[tex]n=\frac{0.150 g}{172 g/mol}=0.0008721 mol[/tex]

1 mole of calcium sulfate crystal has 6 moles of oxygen atoms. Then 0.004446 moles calcium sulfate crystal will have :

[tex]6\times 0.0008721 mol=0.0052326mol\approx 0.00523 mol[/tex]

There are 0.00523 moles of oxygen in 0.150 grams of calcium sulfate crystal.

In 0.150 g of CaSO₄·2H₂O, there are 3.15 × 10²¹ O atoms.

We want to calculate the number of oxygen atoms in 0.150 g of CaSO₄·2H₂O. We will need a series of conversion factors.

A conversion factor is an arithmetical multiplier for converting a quantity expressed in one set of units into an equivalent expressed in another.

We will need to consider the following conversion factors:

[tex]0.150 g CaSO_4.2H_2O \times \frac{1molCaSO_4.2H_2O}{172.17gCaSO_4.2H_2O} \times \frac{6.02\times 10^{23}moleculesCaSO_4.2H_2O }{1molCaSO_4.2H_2O} \times \frac{6\ O\ atoms}{1moleculeCaSO_4.2H_2O} = \\ = 3.15 \times 10^{21} O\ atoms[/tex]

In 0.150 g of CaSO₄·2H₂O, there are 3.15 × 10²¹ O atoms.

Learn more about Avogadro's number here: https://brainly.com/question/7287712