valence of magnesium is 2
and valence of sulfate-ion is 2 too
answer: MgSO4•7H2O
Answer: [tex]MgSO_4.7H_2O[/tex]
Explanation:
[tex]MgSO_4[/tex] is an ionic compound because aluminium element is a metal and hydrogen element is a non-metal. The bond formed between a metal and a non-metal is always ionic in nature.
The nomenclature of ionic compounds is given by:
1. Positive is written first.
2. The negative ion is written next and a suffix is added at the end of the negative ion. The suffix written in case of [tex]SO_4^{2-}[/tex] is '-ate'.
Hence, the name of [tex]MgSO_4[/tex] is magnesium sulphate.
The water of crystallization is written as hydrate with the number of water molecules. As the name is heptahydrate, that means 7 water molecules are present.
Therefore, the correct answer is [tex]MgSO_4.7H_2O[/tex]
How is it possible for two neutral objects to become charged by rubbing them together? A. The binding force of the objects’ atoms overcomes the frictional force and their atoms become more tightly bound. B. The frictional force overcomes the atoms’ binding force, which releases an electron from the innermost orbit of one of the objects. C. There is no change in the objects. D. The frictional force overcomes the force that binds the electrons to the atoms, enabling the electrons to move elsewhere
Answer:
D. The frictional force overcomes the force that binds the electrons to the atoms, enabling the electrons to move elsewhere
Explanation:
Neutral objects becomes charged by rubbing them together due to the frictional force which overcomes the attractive force holding electrons together in an atom.
Friction is the resistance to flow or movement. When we rub bodies together, the movement of electrons becomes inhibited and this can cause an orbital electron loosely held in an atom to be pulled off as the force of friction increases. This mechanism would result in a body losing electron and another readily gaining that electron as they interact. The loss and gain of electrons causes a neutral body to become charged.
Answer:
its D
Explanation:
Which type of bonding involves the complete transfer of a valence electron from a less electronegative atom to a more electronegative one?
Answer:
Ionic or electrovalent bonds
Explanation:
Ionic or electrovalent bonds are interatomic or intramolecular bonds which are formed between two kinds of atoms having a large electronegativity difference usually 2.1.
Electronegativity is the property that combines the ability of an atom to gain or lose electrons. It is expressed as the tendency with which atoms of elements attracts valence electrons in a chemical bond.
In this bond type, a metal transfers its electrons to a more electronegative atom which is a non-metal.
The answer is: a. ionic bonding.
Ionic bond is the electrostatic attraction between oppositely charged ions (cations and anions).
(brainliest would be great)
For example, compound magnesium chloride (MgCl₂) has ionic bond.
In this example, chlorine is large company, because it has greater electronegativity than magnesium (small company) and take electrons (assets) from it.
Magnesium (Mg) transfers two electrons, became positive cation, to chlorine (Cl), which became negative anion.
Magnesium is metal from group 2 and chlorine is nonmetal from group 17 of the Periodic table.
Electronegativity (χ) is a property that describes the tendency of an atom to attract a shared pair of electrons.
Consider the following system at equilibrium. CaCO3(s) Ca2+(aq) + CO32–(aq) The addition of which compound will cause a shift in equilibrium because of a common ion effect? CCl4 CO2 CuSO4 Na2CO3
Answer:
Na₂CO₃.
Explanation:
Le Châtelier's principle states that when there is an dynamic equilibrium, and this equilibrium is disturbed by an external factor, the equilibrium will be shifted in the direction that can cancel the effect of the external factor to reattain the equilibrium.The compound that has a common ion effect is Na₂CO₃.
When it is added to the solution, it is dissolved to produce Na⁺ and CO₃²⁻ which increases the concentration of CO₃²⁻ that will increase the concentration of the products side, so the reaction will be shifted to the left side to suppress the increase in the concentration of CO₃²⁻.Answer:
Na2Co3
Explanation:
DDT is made from the __ of unsaturated hydrocarbons
Answer:
chlorination
Explanation:
Answer: chlorination
Explanation: DDT is made from the
of unsaturated hydrocarbons.
Gas particles moving through the air due to random motion is called what??
Answer:
Explanation:
In gases the particles move rapidly in all directions, frequently colliding with each other and the side of the container. With an increase in temperature, the particles gain kinetic energy and move faster. ... In liquids, particles are quite close together and move with random motion throughout the container.
Gas particles moving through the air due to random motion is called Brownian motion.
What is Gas ?Gas have no definite volume and gases have not a definite shape it can take the shape of container in which it filled. Gases can flow easily. They are highly compressible. They have low density. Gases have very weak intermolecular force and very large intermolecular space.
What is Brownian Motion ?Brownian motion is also called as Brownian movement is defied as the zig-zag motion of particles suspended in a medium. The gas particles moves randomly in Brownian motion.
Thus from the above conclusion we can say that Gas particles moving through the air due to random motion is called Brownian motion.
Learn more about the Brownian Motion here: https://brainly.com/question/769741
#SPJ2
A potential energy diagram is shown.
What is the activation energy of this reaction?
Answer:
Ea = 35 kJ.
Explanation:
Activation energy (Ea) is the difference between the potential energy of intermediate "activated complex/ peak" and reactants.
Ea = P.E. of products - P.E. of reactants = 65 kJ - 30 kJ = 35 kJ.
kindly find the attached image.
A salt is best described as a compound that is formed from the reaction between
an acid and a base.
a strong acid and a weak acid.
a strong base and a weak base.
an acid and water
Save and Exit
Next
Submit
Answer:
An acid and a Base :)
Explanation:
I just took the test got a 96 A
Homologous chromosomes pair up during what phase of meiosis:
Answer:
prophase I
Explanation:
Homologous chromosomes pair up during prophase I of meiosis.
one or more substances changing into one or more substances is an example of a
Hello There!
This is called a "Chemical Change"
A chemical change is when the composition of a substance changes. There are many signs of chemical changes. When a chemical change occurs, you can see a change in color. When a new color is visible that means that a new substance has been created. There also is a new smell "odor" this hints that a new substance has been formed.
Now starting with lithium, look at its electron configuration. Then look at all eight elements in the second period from lithium to neon (Ne). What do you notice about the change in the electron configuration as you go from left to right
Answer:
Explanation:
Lithium is the first element in the second period. The second period has a total number of eight elements in all. The number of electrons in a lithium atom is 3.
The electronic configuration of lithium is 1s²2s¹. Lithium has just a single electron in its outermost shell.
Moving from left to right across the second period, the number of electrons in the outermost shell of the elements increases till it reaches the octet i.e 8:
Be (4) : 1s²2s²
B (5): 1s²2s²2p¹
C (6): 1s²2s²2p²
N (7): 1s²2s²2p³
O(8): 1s²2s²2p⁴
F (9): 1s²2s²2p⁵
Ne(10): 1s²2s²2p⁶
As you go from left to right, the number of valence electrons increases by 1.
From left to right, the number of shell remains fairly constant. Li and Be has one electronic shell each while the rest of the elements in the period have two shells.
As we move from lithium to neon in the periodic table, the elements gain one electron each. Hence, their electron configuration increases sequentially, in line with their increasing atomic number.
Explanation:When starting with lithium and proceeding to neon across the second period of the periodic table, the atomic number increases from 3 to 10. The atomic number corresponds to the number of protons, which also equals the number of electrons in an atom for a neutral element. Accordingly, as we move from left to right, one observes an increase in the electron configuration, with each subsequent element gaining an additional electron. For instance, the electron configuration of lithium is 1s2 2s1, that of beryllium (the next element) is 1s2 2s2, and so on, till we reach neon with a configuration of 1s2 2s2 2p6. Hence, the number of electrons (and hence electron configuration) increases as we move from lithium to neon.
Learn more about Electron Configuration here:https://brainly.com/question/31812229
#SPJ6
PLEASE HELP. Give the orbital configuration of the phosphorus (p) atom.
Answer:
Explanation:
The Electronic Configuration of the elements is the arrangement of all electrons of an element in energy levels and sub-levels (orbitals).
There are 7 energy levels, numbered from 1 to 7, and in which electrons are distributed, logically in order according to their energy level. Each level is divided into sub-levels. These sub-levels into which each level is divided can be up to 4, called: s, p, d, f. In the sub-level s there can only be a maximum of 2 electrons, in p there can be a maximum of 6 electrons, in the sub-level d 10 electrons and finally in the sub-level f there can be a maximum of 14 electrons.
In level 1 there is only one sub-level, which will be the s. In level 2 there are 2 sub-levels, the s and the p. At level 3 there are 3 sub-levels s, p and d. And at level 4 there are 4 sub-levels, the s, the p, the d and the f.
Aufbau's principle is a principle of atomic physics, which explains how electrons are accommodated in their orbits around the nucleus of the atom. This principle states that the filling of these orbitals occurs in increasing order of energy, that is, from the orbitals of lower energy to those of higher energy.
The simplest of the sub-levels is 1s. If you fill the 1s you can start filling the 2s. After the 2s sub-level is satisfied, the 2p can begin to fill and so on.
The atomic number Z of the element represents the number of protons of the element, and in a neutral atom it also indicates the number of electrons.
So, given that the atomic number of the phosphorus is 15, and everything that has been said before, it is possible to say that the electrons that it has in the orbitals will be placed as follows:
1s² 2s² 2p⁶ 3s² 3p³
Finally, the orbital configuration of the phosphorus atom (P) will be as the image shows.
The orbital configuration of the phosphorus (p) atom is attached to the image below.
The phosphorus (P) atom has an atomic number of 15, which means it has 15 electrons. The electron configuration of phosphorus can be determined by filling up the orbitals according to the Aufbau principle and the Pauli exclusion principle.
1s² 2s² 2p⁶ 3s² 3p³, this electron configuration represents the distribution of electrons in the atomic orbitals of a phosphorus atom. The numbers represent the principal quantum numbers (n) and the letters represent the azimuthal quantum numbers (s, p). The superscripts indicate the number of electrons occupying each orbital.
To learn more about orbital configuration, follow the link:
https://brainly.com/question/13840107
#SPJ6
How does the oxidation state of Na change in the following reaction?
Li(s) + NaOH(aq) → LiOH(aq) + Na(s)
The oxidation state of Na decreases from 1 to 0 in this reaction Li (s) + NaOH (aq) → LiOH(aq) + Na(s).
What is Oxidation state ?Oxidation state is also called Oxidation number is defined as the number assigned to atoms in molecules to represent the general distribution of electrons.
What is a Chemical Reaction ?A chemical reaction is a process in which chemical bonds between atoms to break and reorganize, to form other new substances.
The given chemical reaction is
Li (s) + NaOH (aq) → LiOH(aq) + Na(s)
The oxidation state of Li is zero in the reactant side. The oxidation state of Na in the reactant side is 1. The oxidation state of Li in the product side is 1. The oxidation state of Na in reactant side is 0.
So the oxidation number of Na decreases from 1 to 0.
Thus from the above conclusion we can ay that The oxidation state of Na decreases from 1 to 0 in this reaction Li (s) + NaOH (aq) → LiOH(aq) + Na(s).
Learn more about the Oxidation State here: https://brainly.com/question/8990767
#SPJ2
QUICK PLEASE HELP!!!during a combustion reaction, 5.00 grams of oxygen reacted with 5.00 grams of CH4.
What is the amount of the leftover reactant?
4.00 grams of methane
3.75 grams of methane
2.75 grams of oxygen
1.75 grams of oxygen
To determine the leftover reactant in the combustion of 5.00 grams of oxygen and 5.00 grams of CH4, the limiting reagent calculation shows that the leftover reactant is 3.75 grams of methane as oxygen is the limiting reagent.
Explanation:To determine the amount of the leftover reactant in a combustion reaction involving 5.00 grams of oxygen and 5.00 grams of CH4, we need to conduct a limiting reagent calculation. The balanced chemical equation for the combustion of methane (CH4) is:
CH4(g) + 2O2(g) → CO2(g) + 2H2O(l)
From the balanced equation, we can see that one mole of CH4 reacts with two moles of O2. The molar mass of CH4 is 16.04 g/mol, and the molar mass of O2 is 32.00 g/mol, so we can use these to convert the mass of each reactant to moles:
For 5.00 g of CH4: 5.00 g / 16.04 g/mol = 0.3117 mol CH4For 5.00 g of O2: 5.00 g / 32.00 g/mol = 0.15625 mol O2Since the reaction requires 2 moles of O2 for each mole of CH4, we can calculate the needed moles of O2 for the reaction with the available CH4:
0.3117 mol CH4 × 2 mol O2 / 1 mol CH4 = 0.6234 mol O2 needed
However, we only have 0.15625 mol of O2 available, which is less than 0.6234 mol. This means O2 is the limiting reagent, and there will be some unreacted CH4 left over. Since all of the oxygen will be used up, we can calculate the leftover mass of methane:
0.15625 mol O2 × 1 mol CH4 / 2 mol O2 = 0.078125 mol CH4 reacted
0.3117 mol CH4 - 0.078125 mol CH4 reacted = 0.233575 mol CH4 unreacted
Finally, we convert the moles of unreacted CH4 back to grams:
0.233575 mol CH4 × 16.04 g/mol = 3.75 grams of CH4
Therefore, the amount of the leftover reactant is 3.75 grams of methane.
f 1.5 mol of NaBH4 react, how many moles of B2H6 are formed? 2 NaBH4(aq) + H2SO4(aq) → 2 H2(g) + Na2SO4(aq) + B2H6(g)
Answer:
[tex]\boxed{ \text{0.75 mol}}[/tex]
Explanation:
(a) Balanced equation
2NaBH₄ + H₂SO₄ ⟶ 2H₂ + Na₂SO₄ + B₂H₆
(b) Calculation
You want to convert moles of NaBH₄ to moles of B₂H₆
The molar ratio is 1 mol B₂H₆:2 mol NaBH₄
[tex]\text{Moles of B$_{2}$H$_{6}$} =\text{1.5 mol NaBH$_{4}$} \times \dfrac{\text{1 mol B$_{2}$H$_{6}$}}{\text{2 mol NaBH$_{4}$}} = \textbf{0.75 mol B$_{2}$H$_{6}$}\\\\\text{The reaction will produce }\boxed{ \textbf{0.75 mol of B$_{2}$H$_{6}$}}[/tex]
The rock in a lead ore deposit contains 89 % PbS by mass. How many kilograms of the rock must be processed to obtain 1.5 kg of Pb?
Answer:
Approximately 1.9 kilograms of this rock.
Explanation:
Relative atomic mass data from a modern periodic table:
Pb: 207.2;S: 32.06.To answer this question, start by finding the mass of Pb in each kilogram of this rock.
89% of the rock is [tex]\rm PbS[/tex]. There will be 890 grams of [tex]\rm PbS[/tex] in one kilogram of this rock.
Formula mass of [tex]\rm PbS[/tex]:
[tex]M(\mathrm{PbS}) = 207.2 + 32.06 = 239.26\; g\cdot mol^{-1}[/tex].
How many moles of [tex]\rm PbS[/tex] formula units in that 890 grams of [tex]\rm PbS[/tex]?
[tex]\displaystyle n = \frac{m}{M} = \rm \frac{890}{239.26} = 3.71980\; mol[/tex].
There's one mole of [tex]\rm Pb[/tex] in each mole of [tex]\rm PbS[/tex]. There are thus [tex]\rm 3.71980\; mol[/tex] of [tex]\rm Pb[/tex] in one kilogram of this rock.
What will be the mass of that [tex]\rm 3.71980\; mol[/tex] of [tex]\rm Pb[/tex]?
[tex]m(\mathrm{Pb}) = n(\mathrm{Pb}) \cdot M(\mathrm{Pb}) = \rm 3.71980 \times 207.2 = 770.743\; g = 0.770743\; kg[/tex].
In other words, the [tex]\rm PbS[/tex] in 1 kilogram of this rock contains [tex]\rm 0.770743\; kg[/tex] of lead [tex]\rm Pb[/tex].
How many kilograms of the rock will contain enough [tex]\rm PbS[/tex] to provide 1.5 kilogram of [tex]\rm Pb[/tex]?
[tex]\displaystyle \frac{1.5}{0.770743} \approx \rm 1.9\; kg[/tex].
name 3 cell structures that are found in a plant cell and NOT in an animal cell;
Answer:
cell wall
chloroplasts
central vacuole
Explanation:
Plant cells have a cell wall, chloroplasts, and a central vacuole. These structures are not found in animal cells.
The structures of three cells present in the cells in plant, but not animal cell are Cell wall, Chloroplast and Plastids.
Explanation:Animal cell only contain cell membrane whereas plant cell has both cell wall and cell membrane. Unlike animal cell, plant cell makes their own food. The plants come under autotrophs and animals come under heterotrophs.
For this purpose, there is chloroplast in a plant cell. The major function of chloroplast is to produce food through photosynthesis. Plastids are the pigment containing cell organelles which is responsible for the color of plant cell.
Consider the following intermediate chemical equations.
CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)
2H2O(g) → 2H2O(1)
Which overall chemical equation is obtained by combining these intermediate equations?
CH4(g)+2O2(g) → CO2(g) + 2H2O(1)
CH4(g) +202(g) → CO2(g) + 2H2O(g)
CH4(g) + 2O2(g) → CO2(g) + 4H2O(g) + 2H2O(1)
CH4(g) + 2O2(g) → CO2(g) + 6H2O(g)
Answer:
CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l).
Explanation:
We have two equations:CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g)
2H₂O(g) → 2H₂O(l)
To add the two equations: we omit H₂O(g) that is formed by 2 moles in the product side of the first equation and consumed by 2 moles from the reactants side in the second equationSo, the overall chemical equation is obtained by combining these intermediate equations is:CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l).
Answer: The reaction is Exothermic
CH4(g) + 2O2(g) > CO2(g) + 2H2O(g) + energy
Explanation:
Which of the following groups gets energy directly from the grass it eats?
A.producers
B. Decomposers
C.primary consumer
D.secondary consumers
Answer: C. Primary Consumers
Explanation:
Answer:
Primary consumer.
Explanation:
Food chain may be defined as the sequential flow of food energy from one level to the next tropic level. Producers are the first organism that occupies the first tropic level in the food chain.
Producers prepare their food by themselves. Primary consumers get their food by eating directly the producers. Primary consumers are generally feed on the plants and grass.
Thus, the correct answer is option (C).
Why does liquid water have such a high heat capacity?
Choose 1 answer:
Choose 1 answer:
(Choice A)
A
Water is a nonpolar molecule.
(Choice B)
B
Water molecules are good at forming and breaking hydrogen bonds.
(Choice C)
C
Water molecules are packed very closely together.
(Choice D)
D
Water is a linear molecule which makes absorbing heat easier.
Answer:
B
Explanation:
Water molecules are good at forming and breaking hydrogen bonds.
The breaking and reforming of hydrogen bonds in liquid water can absorb a large amount of heat, making water resistant to temperature change.
Why is it that 85.48 rounded to two significant figures is 85 and not 86?
Answer:
See below.
Explanation:
That is because of the .48.
85.48 is closer to 85 than 86.
Which statement explains why the bonds between non metals tend to be covalent?
The bonds are found to be nondirectional
They have large differences in electronegativity
They have small differences in electronegativity
They have ions that produce an electrostatic pull
They have small differences in electronegativity
i think thats right
Answer:
C.) They have small differences in electronegativity
What is the molar mass of CHC13?
Answer:119.38 g/mol
Explanation:
Add the Molar mass of each element to get the final answer. Use the Periodic table to find the molar mass. Molar mass is located under neath the elements.
Molecular mass of CHCl3 is 119.5 grams/mole
What is molecular mass ?It is the sum of atomic weights of all the atoms present in the molecule.How to solve this problem?Mass of Carbon=12 grams / moleMass of Hydrogen=1 gram/moleMass of Chlorine= 35.5 grams/ moleMolecular mass of CHCl3 = mass of Carbon+ mass of Hydrogen+ 3×(mass of Chlorine)
Molecular mass of CHCl3= 12+1+(3×35.5)= 119.5
Hence The Molecular mass of CHCl3 is 119.5 grams/ mole
Learn more about Molecular mass here
https://brainly.com/question/837939
#SPJ2
Given pH = 8.55 Find: [H3O+] and [OH-] Is this acidic, basic or neutral?
Answer:
Explanation:
The given pH = 8.55
Unknown:
[H₃O⁺] = ?
[OH⁻] = ?
In order to find these unknowns we must first establish some relationship.
pH = -log[H₃O⁺]
8.55 = -log[H₃O⁺]
[H₃O⁺] = inverse log₁₀(-8.55) = 2.82 x 10⁻⁹moldm⁻³
To find the [OH⁻],
pH + pOH = 14
pOH = 14 - pH = 14 - 8.55
pOH = 5.45
pOH = -log[OH⁻]
[OH⁻] = inverse log₁₀ (-5.45) = 3.55 x 10⁻⁶moldm⁻³
The solution is basic because it has more concentration of OH⁻ ions compared to H⁺ ions.
Complete the table for ion charge based upon their losing or gaining electrons in the outer shell. (Use the periodic table as necessary.) Group Most Likely Ionic Charge # of Valence Electrons I +1 II +2 III +3 IV +4 or -4 V -3 VI -2 VII -1 VIII 0
Answer:
Explanation:
Group Most Likely Ionic Charge Number of Valence Electrons
I +1 1
II +2 2
III +3 3
IV +4 or -4 4
V -3 5
VI -2 6
VII -1 7
VIII 0 8
For elements in group IV and above, their ionic charge is (8-number of their valence electrons.)
Explanation:
Valence electrons are defined as the electrons which are present in the outermost shell of an atom.
The number of valence electrons in a particular group will be equal to the group number.
Number of valence electrons = Group number
The given table follows:
Group Most likely ionic charge No. of valence electrons
I +1 1
II +2 2
III +3 3
IV +4 or -4 4
V -3 5
VI -2 6
VII -1 7
VIII 0 8
Consider the following intermediate chemical equations.
When you combine the intermediate chemical equations, which substance do you cancel out?
Answer:
PCI3
Explanation:
PCI3 is a product in one reaction and a reactant in the other. This makes it an intermediate as it is produced then used up in the same series of reactions.
Answer: C. PCI3
Explanation:
What is the molarity of a solution that contains 289 grams of sugar in a 2 L solution? (Molar mass of sucrose is 342.2965g/mol). Show your work
Please answer ASAP!!
Answer:
0.422 mol/L.
Explanation:
Molarity (M) is the no. of moles of solute dissolved in a 1.0 L of the solution.M = (no. of moles of glucose)/(volume of the solution (L))
M = (mass/molar mass)of glucose / (volume of the solution (L)).
∴ M = (mass/molar mass)of glucose / (volume of the solution (L)) = (289 g/342.2965 g/mol)/(2.0 L) = 0.422 mol/L.
The molecular weight of carbon dioxide, CO2, is 44.00 amu, and the molecular weight of nitrous dioxide, NO2, is 46.01
amu, so NO2 diffuses
CO2
Answer:
Grahm's law of diffusion states that the rate of diffusion of a gas is inversely proportional to the square root of the mass of its particles.
Molecular weight of NO2 = 46 g mol¹-
Molecular weight of CO2 = 44g mol¹-
Thus the compound which has a lower molecular mass will diffuse at a faster rate than the heavier compound. In this case, the molecular mass of NO2 is more than the CO2 so, NO2 will diffuse at a slower rate than the CO2 molecule.
How does a catalyst speed up a chemical reaction?
Sarah is asked to sort out the list of ions and ionic compounds. How can Sarah differentiate between the ions and ionic compounds?
Answer:
Ionic compounds differ from ions in that the overall charge in ionic compounds equals zero while the overall charge in ions is less than or greater than zero. Ions have a superscript number followed by a either a positive or a negative sign. Where both signs appear in the same formula they make it an ionic compound.
Which of the following best describes hail?
A- Small ice pellets that may fall to the ground in a mixture of rain and snow in the form of a solid
B- A form of precipitation that occurs when liquid and frozen precipitation freezes in layers creating chunks
C- Water droplets that collide with others to form large drops as they leave the clouds and fall toward the ground
D- Solid precipitation that is formed in clouds as ice crystals that stick together in groups to form flakes and leave the clouds as flakes
Answer:
A- Small ice pellets that may fall to the ground in a mixture of rain and snow in the form of a solid
Explanation:
Small ice pellets that may fall to the ground in a mixture of rain and snow in the form of a solid best describes hail.
Small ice pellets that may fall to the ground in a mixture of rain and snow in the form of a solid describe Hail.
What is Hail?Hail is a form of precipitation, or water that can easily fall to the ground from the atmosphere. Hail is former when water droplets freeze together in the clouds. The ice that formed are called hailstones.
Hailstones length is between 5 millimeters and 15 centimeters
Therefore, Small ice pellets that may fall to the ground in a mixture of rain and snow in the form of a solid describe Hail.
Learn more on Hail from the link.
https://brainly.com/question/26066340