If a 2 liter container with an initial pressure of 2 atms is crushed to half its original volume what would its new pressure be in kPa’s

Answer:

The chemical element bromine is classed as a halogen and a nonmetal.

Explanation:

Answer:

They change the rate of reaction.

Explanation:

Temperature increases the rate of reaction as particles move faster.

(Temperature is the average kinetic energy of particles)

Reducing the particle size increases the surface area to volume ratio, which increases the rate of reaction.

Answer:

Format: What are the effects of X and Y on Z?

Independent variable 1: temperature

Independent variable 2: particle size

Dependent variable: reaction rate

Explanation:

i just answered it on e2020

Answer:

3.5

Explanation:

The gas in the reaction is considered as the ideal gas. The new volume of the gas with heating was 2.77 L.

The ideal gas law can be given as:

[tex]PV=nRT[/tex]

For a gas with the change in pressure and temperature, the change in volume is given as:

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

Substituting the initial pressure ([tex]P_1[/tex]), initial volume ([tex]V_1[/tex]), initial temperature ([tex]T_1[/tex]), final pressure ([tex]P_1[/tex]) final temperature ([tex]T_2[/tex]), and the final volume ([tex]V_2[/tex]) can be given as;

[tex]\rm \dfrac{1.4\;atm\;\times\;4\;L}{298\;K} = \dfrac{2.1\;atm\;\times\;\textit V_2}{310\;K}\\\\ \textit V_2=2.77\;L[/tex]

The new volume of the gas is 2.77 L.

Learn more about ideal gas, here:
https://brainly.com/question/8711877

Answer:

option A

Explanation:

Electromagnetic waves are those waves which is produced by oscillation or vibration between the magnetic field and electric field. For example radio waves, visible radiation, ultraviolet, infrared, microwaves etc

In electromagnetic waves higher the frequency means higher the energies and higher the energy means lower the wavelength.

Like gamma rays have highest frequencies with highest energy and shortest wavelength.

Answer: Endothermic reaction.

Explanation:  A chemical reaction in which energy is absorbed from the surrounding environment.

Answer:

2 ... and 1

Explanation:

Hope this is right / helps

Answer:

It could either be 1 or 2. Depending on the question.

Explanation:

Answer:

Due to the lack of context for your question I’m not completely sure which you are talking about but NH can be Imidogen or it could be ammonium which is NH4^1+

The chemical formula NH is incomplete and cannot be accurately named without identifying the number of hydrogen atoms present. A common compound with nitrogen and hydrogen is NH3, known as ammonia.

The name for NH is not complete since the chemical formula appears to be missing a part. Typically, we would expect a numeral after the hydrogen (H) to denote how many hydrogen atoms are present, as in NH3, which is called ammonia. However, if N is intended to represent nitrogen and H represents hydrogen, then we would be dealing with a molecule composed of these elements. A fully correct chemical formula is required for a proper naming.

Answer:

                      1.602 L (or) 1602 mL

Explanation:

             Molarity is the amount of solute dissolved per unit volume of solution. It is expressed as,

                         Molarity  =  Moles / Volume of Solution    ----- (1)

Rearranging above equation for volume,

                         Volume of solution  =  Moles / Molarity    -------(2)

Data Given;

                  Molarity  =  0.00813 mol.L⁻¹

                  Mass  =  1.55 g

First calculate Moles for given mass as,

                   Moles  =  Mass / M.mass

                   Moles  =  1.55 g / 119.002 g.mol⁻¹

                   Moles  =  0.0130 mol

Now, putting value of Moles and Molarity in eq. 2,

                         Volume of solution  =  0.0130 mol / 0.00813 mol.L⁻¹

                         Volume of solution  = 1.60 L

or,

                         Volume of solution  =  1602 mL

Answer:

2H2O + 1O2 → 2H2O2

Explanation:

by semiractions:

(1)      2 H2O  →  H2O2  + 2H+

(2)      2H+  +  O2  →   H2O2

(1) + (2):

⇒ 2H2O + O2   →   2H2O2

                     4 - O - 4

                     4 - H - 4

The correct image is option A

What happens when we add NaCl to water?

The process of dissolving table salt (NaCl) in water is known as dissolution. The salt separates into sodium (Na⁺) and chloride (Cl⁻) ions, which are its component ions. These ions, which are charged positively or negatively, interact with the molecules of water to surround and disseminate themselves.

A homogenous mixture known as saltwater is created as a result. The ionic connections holding the salt crystal lattice together are broken during the physical process of NaCl dissolving in water, distributing the ions uniformly throughout the solution.

The diagram  that best ilustrates the ion-molecule attractions that occur when the ions of NaCl(s) are added to water is option B)

When sodium chloride (NaCl) is added to water, it dissolves and dissociates into Na+ and Cl- ions. These ions are then surrounded by water molecules due to ion-dipole attractions. Water molecules are polar, with a partially negative oxygen atom and partially positive hydrogen atoms.

The positive sodium ions are attracted to the negative oxygen atoms in the water molecules, and the negative chloride ions are attracted to the positive hydrogen atoms. This results in the formation of a hydrated lattice, where the ions are surrounded by water molecules.

The question is incomplete, here is the complete question:

How many grams of zinc would be required to produce 9.65g of zinc hydroxide

Zn+2MnO₂+H₂O→Zn(OH)₂+Mn₂O₃

Answer: The mass of zinc required is 6.35 grams

Explanation:

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]     .....(1)

Given mass of zinc hydroxide = 9.65 g

Molar mass of zinc hydroxide = 99.4 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of zinc hydroxide}=\frac{9.65g}{99.4g/mol}=0.0971mol[/tex]

The given chemical equation follows:

[tex]Zn+2MnO_2+H_2O\rightarrow Zn(OH)_2+Mn_2O_3[/tex]

By Stoichiometry of the reaction:

1 mole of zinc hydroxide is produced from 1 mole of zinc

So, 0.0971 moles of zinc hydroxide will be produced from = [tex]\frac{1}{1}\times 0.0971=0.0971mol[/tex] of zinc

Now, calculating the mass of zinc from equation 1, we get:

Molar mass of zinc = 65.4 g/mol

Moles of zinc = 0.0971 moles

Putting values in equation 1, we get:

[tex]0.0971mol=\frac{\text{Mass of zinc}}{65.4g/mol}\\\\\text{Mass of zinc}=(0.0971mol\times 65.4g/mol)=6.35g[/tex]

Hence, the mass of zinc required is 6.35 grams

Answer:

Virtual images.

Hope this helps.

Answer:

See the answer below, please.

Explanation:

The bonds formed between metals and nonmetals are called ionics. These occur between atoms with electronegativity difference. Example: NaCl (Sodium Chloride)

Instead, covalent bonds are formed between two nonmetals (one or more electron pairs are shared). Example: H202 (hydrogen peroxide).

In the case of metal formed bonds, they are called metallic.

Physical properties of a substance are measured without changing its composition. Chemical properties describe a substance's potential for chemical change.

Physical and chemical properties are key concepts in understanding how substances interact with one another and change. Physical properties, such as hardness, boiling point, and mass, describe the physical characteristics of a substance without altering its chemical composition. They can be observed or measured during physical changes, which include states of matter like melting, freezing, and vaporisation, where no new substance is formed.

In contrast, chemical properties describe a substance's ability to undergo changes that alter its chemical structure, like flammability or acidity. Chemical changes result in the formation of one or more new substances with different properties, a process where chemical bonds are broken or formed. For example, when carbon burns in oxygen, it forms carbon dioxide, indicating a chemical change from the original substances.

The molecular formula of the compound is C4H8O4.

The molecular formula of Compound X can be determined by calculating the empirical formula and then obtaining the molecular formula based on the molar mass. First, we calculate the empirical formula using the mass percentages of carbon, hydrogen, and oxygen in the compound. From the given information, the empirical formula is CH2O. To obtain the molecular formula, we need to calculate the empirical formula mass by summing the atomic masses of its elements. The empirical formula mass of CH2O is 30.03 g/mol. To find the molecular formula, we divide the molecular molar mass (128 g/mol) by the empirical formula mass (30.03 g/mol). The result is approximately 4.27, which indicates that the molecular formula of Compound X is 4.27 times the empirical formula. Multiplying the subscripts of the empirical formula (CH2O) by 4.27, we get the molecular formula of Compound X as C4H8O4.

https://brainly.com/question/36480214

#SPJ3

Explanation:

Skin Deep is developed by AAAS and funded by Neutrogena. I think

cell membrane part of a cell has a function that is similar to your skin, it protect the human body from harsh environment.

The cell membrane of a cell is a thin selectively semi-permeable membrane which covers the cell by surrounding cell cytoplasm, the major component of cell membrane are protein and lipid where the major lipid is phospholipid.

The proteins are different types present in bilayer membrane such as peripheral, intrinsic and extrinsic protein; Some major organelles of the cell have cell membrane such as nucleus and mitochondria.

The function of cell membrane is to protect the cell, maintain the  integrity of the internal environment, act as a base of attachment for cell to cell communication like cytoskeleton, helps in transport of nutrients into the cell and outside of the cell.

It only allows the molecules and ions maintain the specific physical/chemical properties, is a protective layer surrounding a cell, it allows waste to leave the cell.

Learn more about cell membrane, here:

https://brainly.com/question/13524386

#SPJ2

Answer:

They are averages.

Explanation:

atomic numbers on periodic tables are derived from the average value of all the isotopes of the element. So being averages they are sometimes not integers.

Answer:

The sum of the number of protons and neutrons in an atom is called the mass number.  Atomic mass is never an integer number for several reasons: The atomic mass reported on a periodic table is the weighted average of all the naturally occurring isotopes. Being an average it would be most unlikely to be a whole number.

Explanation:

Answer: 244.6°F

Explanation:

As the ions present on a magnet and a superconductor are oppositely charged, it would help a superconductor to float over a magnet.

An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.

Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.Ions of opposite charges attract in an ionic bond.

Learn more about ions,here:

https://brainly.com/question/29183072

#SPJ5

The role of a spark plug is to supply some of the energy of activation for the combustion reaction.

Explanation:

The correct answer is (C) The spark supplies some of the energy of activation for the combustion reaction, is  best describes the role of the spark from the spark plug in an automobile engine.

In an automobile engine, the spark from the spark plug plays a crucial role in initiating the combustion process. The combustion reaction involves the rapid oxidation of a fuel, typically a volatile hydrocarbon, which releases a significant amount of energy. However, this reaction requires an initial input of energy to overcome the energy barrier known as the activation energy.

The spark from the spark plug provides this necessary energy of activation. When the spark plug ignites, it creates a small, high-energy spark that is hot enough to initiate the combustion of the air-fuel mixture in the engine's cylinder. This spark raises the temperature of a small portion of the fuel-air mixture to a point where the molecules have enough kinetic energy to react with each other, thus starting the combustion reaction.

Once the reaction starts, it releases enough energy to sustain itself and continue the combustion process without additional input from the spark plug. The energy released by the combustion reaction is what powers the engine by pushing the pistons down, which in turn rotates the crankshaft and ultimately drives the vehicle's wheels.

To summarize, the spark from the spark plug is essential because it:

- Provides the energy of activation needed to initiate the combustion reaction.

- Does not decrease the energy of activation (option A).

- Does not significantly increase the concentration of the volatile reactant (option B).

- Does not alter the activated complex (option D), as the activated complex is a theoretical state in the reaction pathway, not something that can be provided or altered by external means.

- Does not provide the heat of vaporization (option E) for the hydrocarbon, as the spark's role is to initiate combustion, not to vaporize the fuel, although vaporization of the fuel is a necessary step before combustion.

Therefore, the spark's role is to supply some of the energy of activation for the combustion reaction, making option (C) the correct description.

The oxidation state, sometimes referred to as oxidation number, describes the degree of oxidation of an atom in a chemical compound.

Explanation:

The oxidation number of an atom is the charge that atom would have if the compound was composed of ions. 1. The oxidation number of an atom is zero in a neutral substance that contains atoms of only one element. The oxidation number of simple ions is equal to the charge on the ion.

The oxidation number of a mono atomic ion equals the charge of the ion. The oxidation number of H is +1, but it is -1 in when combined with less electro negative elements. The oxidation number of O in compounds is usually -2, but it is -1 in peroxides. The oxidation number of a Group 1 element in a compound is +1.

Answer:

Set an alarm for five hours after your bedtime.

Go to sleep as usual.

When the alarm goes off, stay up for 30 minutes. Enjoy a quiet activity like reading.

Fall back asleep.

Explanation:

Answer:

juice wrld jk

Explanation:

Answer:

C

Explanation:

Answer: option C

Explanation:

A chlorine atom can form ionic bonds by accepting an electron and covalent bonds by sharing electrons

Answer:

The particles of the solid vibrate faster and faster. After a while, they can start to move around

Explanation: Solid particles movement are restricted due to the strong force of attraction between the molecules,Solid phase will only change to liquid phase if the forces of attraction holding the molecules together are broken down by heat, when this happens the solid particles movement will become more mobile as the substance is moving from solid phase and liquid phase

The correct answer is C) 8.7

The pH of a solution indicates the acidity or basicity of the answer. A solution is said to be neutral if the pH is 7, if the pH fee is less than 7 then it is acidic in nature and if the pH cost is greater than 7 then the solution is simple in nature.

Ph may appear as it belongs at the periodic desk of factors, however, it's truly a unit of size. The abbreviation pH stands for ability hydrogen, and it tells us how an awful lot hydrogen is in drinks—and the way active the hydrogen ion is.

PH is a measure of the attention of H+(aq) ions in an answer. The attention of H+ ions may be stated in mol dm(-three), but the use of the log(10) feature simplifies the numbers concerned. Definition: pH is the terrible logarithm to base 10 of the hydrogen ion awareness in an aqueous solution.

Learn more about the solution  here: https://brainly.com/question/251701

#SPJ2

Law of conservation of mass for a chemical reaction can be expressed  by all of the above.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.For a reaction to obey law of conservation of mass it must be balanced.

Learn more about law of conservation of mass,here:

https://brainly.com/question/28711001

#SPJ2

Your question is incomplete, but most probably your full question was,the law of conservation of mass tells us, in part, that matter is neither created nor destroyed.How can the law of conservation of mass for a chemical reaction be expressed? A. By using using coefficients coefficients in in a chemical equation B. By  writing a a balanced balanced chemical  equation C. By counting  the  atoms  present on each  side of the equation D. All of of the the above

The law of conservation of mass states that in a chemical reaction, matter is neither created nor destroyed, meaning the total mass of the reactants equals the total mass of the products. Introduced by Antoine Lavoisier in 1789, this principle highlights that matter can change forms but the total mass is conserved.

The law of conservation of mass states that matter is neither created nor destroyed during a chemical reaction. This means that the total mass of the reactants (substances that undergo the changes) must be equal to the total mass of the products (substances formed as a result of the reaction). For example, when burning charcoal in oxygen, the mass of the charcoal and oxygen before the reaction is the same as the mass of the carbon dioxide, water vapor, and ash produced. Antoine Lavoisier, a French chemist, introduced this concept in 1789, emphasizing that although matter can change forms (e.g., from a solid to a gas), the total mass remains constant before and after the reaction. The rearrangement of atoms during reactions ensures the conservation of mass.

Answer:

four times im cool.

Explanation:

The following is true of tetrads is they separate during meiosis I.

The correct option is (B).

Tetrads, also known as bivalents, are structures formed during the prophase I stage of meiosis, specifically during the crossing over process. During prophase I, homologous chromosomes pair up to form tetrads. Each tetrad consists of two homologous chromosomes, each composed of two sister chromatids. This pairing allows for the exchange of genetic material between homologous chromosomes through crossing over.

Once tetrads are formed, they undergo a process called crossing over, where segments of DNA are exchanged between the paired homologous chromosomes. This genetic recombination increases genetic diversity among the resulting gametes.

During meiosis I, tetrads align at the metaphase plate, and then homologous chromosomes separate, with one chromosome from each homologous pair moving to opposite poles of the cell. This separation occurs during the first division of meiosis, known as meiosis I. Therefore, option B, "They separate during meiosis I," is the correct statement regarding tetrads.

As for the other options:

A. Tetrads do not exist throughout the process of meiosis. They are transient structures formed during prophase I and are resolved as homologous chromosomes separate during meiosis I.

C. Tetrads are not found only in haploid cells. They are formed during meiosis, which ultimately leads to the production of haploid cells (gametes), but they themselves are formed during the diploid stage of meiosis.

D. Tetrads do not form in cells undergoing mitosis. Mitosis involves the division of a diploid cell into two identical diploid daughter cells, and it does not involve the pairing of homologous chromosomes or the formation of tetrads. Tetrads are specific to meiosis, which is a process of cell division that leads to the formation of haploid gametes for sexual reproduction.

complete question given below:

Which of the following is true of tetrads?

A. They exist throughout the process of meiosis.

B. They separate during meiosis I.

C. They are found only in haploid cells.

D. They also form in cells undergoing mitosis.

Jordan has to include control factors including light, temperature, and nutrient levels to improve the experiment's design. He must make sure that, aside from the music exposure, the second experiment's parameters are the same for both plants.

Jordan should continue to maintain control over variables that might affect tomato development in the revised experiment. To ensure that any variations in tomato yield are mostly attributable to the music's effect, controllable variables such as light intensity, temperature, and nutrient delivery must be present.

With the exception of the music exposure, both plants should be put to the same conditions. This well designed setup will make it easier to pinpoint the precise impact of music on tomato development.

Additionally, a larger sample size with both tomato plants exposed to music and those not will yield more reliable results. Jordan will be able to make more trustworthy deductions regarding the real effects of music on plant growth in this way.

To know more about control factors here https://brainly.com/question/26146814

#SPJ3

The given question is incomplete, complete question is- "Jordan is doing a science fair project on the effects of music on the growth of tomatoes. He has two tomato plants, Plant A and Plant B, that he grows in a window and gives the same amount of water. Plant A is exposed to classical music using headphones attached to the soil. Throughout the growth period, Jordan counts the number of tomatoes produced by each plant.

Plant A = 35 Tomatoes | Plant B = 55 Tomatoes

Jordan needs to repeat the experiment but his teacher says that he needs to improve his design in his second experiment what should he do different?"

Answer: C. 16

Explanation: In 2 (NH4)2SO4 the atoms of H is equal to:

H = 4x 2 = 8 x 2 = 16 atoms

the electrostatic forces are [tex]10^{36}[/tex] larger than the gravitational force

Explanation:

Let's do the calculation by using two molecules of hydrogen, each containing 2 atoms of hydrogen.

The gravitational force between the two molecules is given by:

[tex]F=\frac{G m_1 m_2}{r^2}[/tex]

where

[tex]G=6.67\cdot 10^{-11} m^3 kg^{-1}s^{-2}[/tex] is the gravitational constant

m1 and m2 are the masses of the two molecules: since they are identical,

[tex]m_1 = m_2 = 2m_p = 1.67\cdot 10^{-27} kg[/tex], twice the mass of the proton

r is the distance between the two  molecules

The force can be rewritten as

[tex]F_G=\frac{Gm_p^2}{r^2}[/tex]

We can assume instead that electrostatic force between the two molecules is given by the interaction between the positively charged nuclei and the neatively charged electrons. Therefore,

[tex]F_E=\frac{kq_1 q_2}{r^2}[/tex]

where

[tex]k=8.99\cdot 10^9 Nm^{-2}C^{-2}[/tex] is the Coulomb's constant

[tex]q_1 = q_2 = 2e[/tex] is the magnitude of the charge of each molecule, where

[tex]e=1.6\cdot 10^{-19}C[/tex] is the fundamental charge

r is the distance between the two molecules

So the force can be  rewritten as

[tex]F_E=\frac{ke^2}{r^2}[/tex]

Therefore, the ratio between the two forces is:

[tex]\frac{F_E}{F_G}=\frac{ke^2}{Gm_p^2}=\frac{(8.99\cdot 10^9)(1.6\cdot 10^{-19})^2}{(6.67\cdot 10^{-11})(1.67\cdot 10^{-27})^2}\sim 10^{36}[/tex]

So, the electrostatic forces are [tex]10^{36}[/tex] larger than the gravitational force.

Learn more about electric force:

brainly.com/question/8960054

brainly.com/question/4273177

Learn more about gravitational force:

brainly.com/question/1724648

brainly.com/question/12785992

#LearnwithBrainly