Hydrogen gas and oxygen gas react to form liquid hydrogen peroxide. Which statement is true about the reaction? A. The same atoms are present, so the chemical properties remain the same. B. The atoms of the reactants combine to form a new substance. C. The two gases mix together, but a new substance does not form. D. The product that is formed has the same physical properties as the reactants.

The radius of an electron in the third shell of the hydrogen atom, according to the Bohr model, is calculated as 4.7628 x 10⁻¹⁰ meters.

To calculate the radius of an electron in the third shell (n=3) of the hydrogen atom according to the Bohr model of the hydrogen atom, you use the formula that relates the main quantum number (n) to the radius of the electron's orbit. The radius of an orbit (rn) in the Bohr model is given by the equation rn = n2 imes ao, where ao is the Bohr radius and equals 5.292  imes 10
11 m. For the third shell, n=3, so the calculation is r3 = 32  imes 5.292 imes 10-11 m = 9 imes 5.292 imes 10-11 m.

Therefore, the radius of an electron in the third shell is r3 = 47.628 imes 10-11 m = 4.7628 imes 10-10 m. Keep in mind that while this model provides insight, it has been refined by quantum mechanics.

Answer:

that a chemical change

Explanation:

because it changing properties

It’s Chemical change

It will be appropriate for bill to stay for 30 minutes.

I would use dimensional analysis for this problem. You would start with the given amount of Na which is 59.0g. You are trying to find the moles of NaCl.

(59.0g Na)*(1 mol Na)/(22.99 g Na)*(2 mol NaCl)/(2 mol Na)=

2.57 mol NaCl

The units will cancel out until you are left with moles of NaCl. The answer has the correct number of significant figures (3 sig figs).

Answer: 2.56 moles

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} Na=\frac{59.0g}{23g/mol}=2.56moles[/tex]

[tex]2Na(s)+Cl(g)\rightarrow 2NaCl(s)[/tex]

Na is the limiting reagent as it limits the formation of product and chlorine is the excess reagent.

According to stoichiometry :

2 moles of Na produce = 2 moles of NaCl

Thus 2.56 moles of Na produce =[tex]\frac{2}{2}\times 2.56=2.56moles[/tex]  of NaCl

Thus 2.56 moles of NaCl are produced.

When something is oxidized it means that oxygen is added to it. Therefore the answer is C. Oxygen!

Hope this helped!

Oxides of nitrogen result from a combination of nitrogen and oxygen. Hence, the correct answer is C. oxygen.

Oxides of nitrogen, commonly known as nitrogen oxides or NOx, are usually formed from a combination of nitrogen and oxygen. Specifically, they refer to compounds that basically contain nitrogen and oxygen atoms, such as nitrogen monoxide (NO), nitrogen dioxide (NO₂), and nitrogen trioxide (N₂O₃).

Generally, these oxides of nitrogen are often produced during high-temperature combustion processes, such as those occurring in vehicle engines, power plants, and industrial processes. The primary source of oxygen for the formation of nitrogen oxides is atmospheric oxygen (O₂).

Learn more about oxygen from the link given below.

https://brainly.com/question/34199483

#SPJ2

cl2>F2>H2

we can do this by molar mass

Hydrogen - 1

clorine - 35 x2 = 70

flourine- 18 x 2 = 36

flourine - 18

Molar mass has a direct relationship with entropy. The order of decreasing molar entropy at 298K is F[tex]_2[/tex]> Cl[tex]_2[/tex] > H[tex]_2[/tex].

Entropy is a measurable physical characteristic and a scientific notion that is frequently connected to a condition of disorder, unpredictability, or uncertainty. It has several applications in physics and chemistry, as well as in biological systems as well as how they relate to life.

The phrase and the idea are employed in many different contexts, including information theory and classical thermodynamics. Molar mass has a direct relationship with entropy. The order of decreasing molar entropy at 298K is F[tex]_2[/tex]> Cl[tex]_2[/tex] > H[tex]_2[/tex].

Therefore, the order of decreasing molar entropy at 298K is F[tex]_2[/tex]> Cl[tex]_2[/tex] > H.

To know more about entropy, here:

https://brainly.com/question/13146879

#SPJ6

a) (NH4)2SO4 --- 1 mole of it contains 2 moles of N, 8 moles of H, 1 mole of S, and 4 moles of O.

MM = (2 moles N x 14.0 g/mole) + (8 moles H x 1.01 g/mole) + (1 mole S x 32.1 g/mole) + (4 moles O x 16.0 g/mole) = 132 g/mole.

6.60 g (NH4)2SO4 x (1 mole (NH4)2SO4 / 132 g (NH4)2SO4) = 0.0500 moles (NH4)2SO4

b) The molar mass for Ca(OH)2 = 74.0 g/mole, calculated like (NH4)2SO4 above.

4.5 kg Ca(OH)2 x (1000 g / 1 kg) x (1 mole Ca(OH)2 / 74.0 g Ca(OH)2) = 60.8 moles Ca(OH)2

The number of mole in the compounds are:

A. 6.60 g of (NH₄)₂SO₄ contains 0.05 mole.

B. 4.5 kg Ca(OH)₂ contains 60.81 moles

The mole of a substance is related to its mass and molar mass according to the equation:

[tex]Mole = \frac{mass}{molar mass }[/tex]

With the above formula, we can obtain the answer to the questions given above. This is illustrated below:

A. Determination of the number of mole in  6.60 g of (NH₄)₂SO₄

Molar mass of (NH₄)₂SO₄ = 2[14 + (4×1)] + 32 + (4×16)

= 2[14 + 4] + 32 + 64

= 2[18] + 32 + 64

= 36 + 32 + 64

= 132 g/mol

Mass of NH₄)₂SO₄ = 6.60 g

[tex]Mole = \frac{mass}{molar mass }[/tex]

Mole of NH₄)₂SO₄ = [tex]\frac{6.6}{132}\\\\\\[/tex]

Thus, 6.60 g of (NH₄)₂SO₄ contains 0.05 mole.

B. Determination of the number of mole in 4.5 kg Ca(OH)₂

Molar mass of Ca(OH)₂ = 40 + 2(16 + 1)

= 40 + 2(17)

= 40 + 34

= 74 g/mol

Mass of Ca(OH)₂ = 4.5 kg

= 4.5 × 1000

= 4500 g

Mole of Ca(OH)₂ =?

[tex]Mole = \frac{mass}{molar mass }[/tex]

Mole of Ca(OH)₂ = [tex]\frac{4500}{74}\\\\\\[/tex]

Thus, 4.5 kg Ca(OH)₂ contains 60.81 moles

Learn more: https://brainly.com/question/17201079

In a reaction, there is no energy lost or created because of the law of conversion of energy. The energy is just transformed from one form to others.

A chemical reaction is a reaction in which the reactant are combined to form products.

In a chemical reaction, energy does not lose, it is just transformed into another form.

Thus, In a reaction, there is no energy lost or created because of the law of conversion of energy. The energy is just transformed from one form to others.

Learn more about chemical reaction

https://brainly.com/question/22817140

#SPJ2

Answer:

Explanation:

1) Both acids and bases ionize in aqueous solutions so they are able to conduct electricity.

The ions, being charged particles, when flow through the solution are charge carriers, then they conduct electricity.

So, the option A does not state a difference between a solution of a base and a solution of an acid.

2) Both acids and bases are able to cause an indicator color change.

The usufulness of the indicators is that they are able to change of color when the pH changes either from acid to basic or from basic to acid. There are different indicators because none is suitable for the whole range of pH, but the statement B is not how solutions of base and acids differ.

3) The model of Arrhenius for acids and bases states that an acid is a substance that ionizes in water releasing H⁺ ions (this is equivalent to H₃O⁺) and a base is a substance that releases OH⁻ ions in water. Then, acids have a greater concentration of H₃O⁺ (so option C is not true for a solution of a base) and bases  have a greater concentraion of OH⁻, making the option D. true.

Answer:

D. Has a great [OH-]

Explanation:

Castle learning

Answer:

[tex]\boxed{\text{39 }^{\circ}\text{C}}[/tex]

Explanation:

We can use the Arrhenius equation:

[tex]\ln(\frac{k_2 }{k_1}) = \frac{E_{a} }{R}(\frac{1}{T_1} - \frac{1 }{T_2 })[/tex]

Data:

Eₐ = 40.1 kJ·mol⁻¹

k₁ = 0.0160 s⁻¹;              k₂ = 0.0320 s⁻¹

T₁ = 26 °C = 299.15 K; T₂ = ?  

Calculations:

[tex]\ln(\frac{0.0320}{0.0160}) = \frac{40 100 }{8.314}(\frac{ 1}{299.15}} - \frac{1 }{T_{2} })\\\\\ln2 = 4823(\frac{ 1}{299.15}} - \frac{1}{T_{2} }) \\\\\ln2 - 16.12 = -\frac{4823}{T_{2} }\\\\-15.43 = -\frac{4823}{T_{2} }\\\\T_{2} = \frac{4823}{15.43} =\textbf{312.6 K}[/tex]

T₂ = 312.6 K = 39 °C

The reaction will go twice as fast at [tex]\boxed{\text{39 }^{\circ}\text{C}}[/tex].

The temperature at which the reaction would go twice as fast, given an activation energy of 40.1 kJ/mol and an initial rate constant of 0.0160 s⁻¹ at 26 °C, is approximately 39.4 °C.

Solution

We can use the Arrhenius equation to solve this problem:

k = A * e^(-Ea / (R * T))

where:

Given that the rate constant at 26 °C (299 K) is 0.0160 s⁻¹ and we need to find the temperature where the rate constant doubles (0.0320 s⁻¹), we can use the two-point form of the Arrhenius equation:

ln(k₂ / k₁) = -Ea / R * (1/T₂ - 1/T₁)

where:

Rearrange the equation to solve for T₂:

ln(0.0320 / 0.0160) = -40,100 J/mol / 8.314 J/mol·K * (1/T₂ - 1/299 K)

Solve for the ratio of rate constants:

Solve for 1/T₂:

Convert T₂ to degrees Celsius:

T₂ - 273 ≈ 39.4 °C

Therefore, the temperature at which the reaction would go twice as fast is approximately 39.4 °C.

It is 362.102 km/hr

Answer:

The correct answer is [tex]362.32 \frac{km}{hour}[/tex]

Explanation:

The rule of three or is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them. That is, what is intended with it is to find the fourth term of a proportion knowing the other three. Remember that proportionality is a constant relationship or ratio between different magnitudes.

If the relationship between the magnitudes is direct, that is, when one magnitude increases, so does the other, the direct rule of three must be applied. To solve a direct rule of three, the following formula must be followed:

A ⇒ B

C ⇒ x

So [tex]x=\frac{C*B}{A}[/tex]

The direct rule of three is the rule applied in this case where there is a change of units. To perform this conversion of units, you must first know that 1km = 0.621 miles. So, if 1 km is 0.621 miles, how many kilometers equals 225 miles?

[tex]x kilometers=\frac{225 miles*1 km}{0.621 miles}[/tex]

[tex]x kilometers=362.32 kilometers[/tex]

So, finally,

[tex]225 \frac{miles}{hour} =362.32 \frac{miles}{hour}[/tex]

Answer:

Safety goggles and chemical fume hoods

Explanation:

The reaction between sodium And chlorine yields sodium chloride. Given 500 gms each of sodium and chlorine, approximately 500 g of sodium chloride can be produced.

The reaction 2Na + Cl2 produces sodium chloride or NaCl. To calculate the amount of sodium chloride produced from 500 g of sodium and 500 g of chlorine, we first need to know the molar mass of the elements involved. The molar mass of Sodium (Na) is 23 g/mol and Chlorine (Cl2) is 71 g/mol. Now, from the balanced equation, it is clear that 2 moles of Na (46 g) react with 1 mole of Cl2 (71 g) to produce 2 moles of NaCl, whose molar mass is 58 g/mol. Hence, 117 g of Na would react completely with 500 g of Cl2 to produce 500 g of NaCl approximately, making Sodium (Na) the limiting reactant. Therefore, from 500 g of each Sodium and Chlorine, we could theoretically produce around 500 g of Sodium Chloride (NaCl).

https://brainly.com/question/34137415

#SPJ12

Final answer:

Using stoichiometry, it is determined that 500 grams of chlorine is the limiting reactant and from this amount, 824.21 grams of sodium chloride can be produced from the reaction 2 Na + Cl2.

Explanation:

To determine how many grams of sodium chloride (NaCl) can be produced from 500 grams of sodium (Na) and 500 grams of chlorine (Cl2), we need to use stoichiometry and the balanced chemical equation:

2 Na (s) + Cl2 (g) → 2 NaCl (s)

First, we should convert the mass of the reactants to moles using their molar masses (Na = 22.99 g/mol, Cl2 = 70.90 g/mol). Then, we compare the mole ratio from the balanced equation to identify the limiting reactant. The limiting reactant will determine the maximum amount of product that can be formed.

For sodium: 500 g Na × (1 mol Na / 22.99 g Na) = ~21.75 mol Na

For chlorine: 500 g Cl2 × (1 mol Cl2 / 70.90 g Cl2) = ~7.05 mol Cl2

From the balanced equation, we know that 1 mole of Cl2 reacts with 2 moles of Na. Here, Cl2 is the limiting reactant, and it will determine the number of moles of NaCl that can be formed:

7.05 mol Cl2 × (2 mol NaCl / 1 mol Cl2) = 14.1 mol NaCl

To find the mass of NaCl produced, we multiply the moles of NaCl by its molar mass (NaCl = 58.44 g/mol):

14.1 mol NaCl × (58.44 g NaCl / 1 mol NaCl) = ~824.21 g NaCl

Therefore, 824.21 grams of NaCl can be formed from 500 grams each of Na and Cl2 when using the correct stoichiometry of the reaction.

Answer:

The element is Hafnium

Explanation:

Hi, Hafnium was discovered in 1923 by George Charles de Hevesy y Dirk Coster in Denmark. It's name was given after the capital of that country: Copenhagen which name in latin is Hafnia.

Answer:

Explanation:

To answer this question you must look at your periodic table.

The elements in the periodic table are ordered in increasing order of atomic number and elements with similar chemical properties, due to the same number of valence eletrons, lay in the same column.

The column in the periodic table corresponds to the chemical group, and,  in the most modern version, is identified with a number 1 through 18.

The elments Cu (copper), Ag (silver), and Au (gold), all metals, are in the same group (column) number 11.

The elements in the columns 3 trough 12 are transition metals. The atomic numbers of thise elements, which let you to find them easily in your periodic table, are:

Those elements, along with platinum are paladium, are the metals with the lowest reactivity, which is the reason why they are found in nature in its pure form (not combined with other elements).

Cu, Ag, and Au are all in Group 11 of the periodic table, known for having eleven valence electrons and being part of the d-block transition metals. They appear in various transition series (Cu in the first, Ag in the second, and Au in the third) and can form d10 coordination complexes.

The elements Cu (Copper), Ag (Silver), and Au (Gold) all belong to Group 11 of the periodic table. These metals are collectively known as the coinage metals and are characterized by having eleven valence electrons. They are part of the d-block elements, specifically included in the transition metals category. Copper is in the first transition series, silver is part of the second, and gold falls within the third. The properties of these metals, such as their high conductivities and malleability, make them highly valuable and extensively used in coins, jewelry, and electronics.

Moreover, when these elements form complexes with coordination number 2, as seen with d10 metal ions like Cut, Ag+, and Aut, they typically exhibit a linear L-M-L structure. Such configurations can be useful in various applications including the extraction of gold from its ores.

Answer:

3.it increases

Explanation:

Final answer:

The force of attraction decreases when the distance between two objects increases, according to the inverse-square law for forces like gravity and electrostatic forces.

Explanation:

When the distance between two objects increases, the force of attraction between them decreases. This principle is observed in both gravitational and electrostatic forces. The magnitude of the force actually decreases as the square of the distance increases. If the distance doubles, the force between the objects would decrease to one fourth of its original value. Additionally, an increase in mass for an object in uniform circular motion will result in an increase of the required centripetal force to maintain the same speed.

Answer:

= 4

Explanation:

The pH of a solution is given by;

pH = - log [H+] , while

pOH = - log [OH-]

But; pH + pOH = 14

Therefore;

pH = 14 - pOH

     = 14 - 10

     = 4

4 is the correct answer

Answer:

Explanation:

1) Data:

a) Hypochlorous acid = HClO

b) [HClO} = 0.015

c) pH = 4.64

d) pKa = ?

2) Strategy:

With the pH calculate [H₃O⁺], then use the equilibrium equation to calculate the equilibrium constant, Ka, and finally calculate pKa from the definition.

3) Solution:

a) pH

b) Equilibrium equation: HClO (aq) ⇄ ClO⁻ (aq) + H₃O⁺ (aq)

c) Equilibrium constant: Ka =  [ClO⁻] [H₃O⁺] / [HClO]

d) From the stoichiometry: [CLO⁻] = [H₃O⁺] = 2.29 × 10 ⁻⁵ M

e) By substitution: Ka = (2.29 × 10 ⁻⁵ M)² / 0.015M = 3.50 × 10⁻⁸ M

f) By definition: pKa = - log Ka = - log (3.50 × 10 ⁻⁸) = 7.46

The statement that a couples' shower is inappropriate is false. Couples' showers are a modern, inclusive celebration for both members of a couple and are deemed appropriate based on the couple's preference and cultural norms.

The assertion that it is inappropriate to give a couples' shower is false. A couples' shower is a modern take on traditional bridal showers, and is considered an appropriate event. It involves both members of the couple, regardless of gender, and allows guests who are close to both individuals to celebrate their union together. The appropriateness of a couples' shower is determined by the couple's preferences and the social norms of their community or culture.

Answer:

Explanation:

You can solve this question using just some chemical facts:

Hence, since you are asked to state the solution with the highest concentration of hydroxide ions, you just pick the highest pH. This is the option d, pH = 12.59.

These mathematical relations are used to find the exact concentrations of hydroxide ions:

Then, you can follow these calculations:

Solution    pH        pOH                            [OH⁻]

a.               3.21       14 - 3.21 = 10.79        antilogarithm of 10.79 = 1.6 × 10⁻¹¹

b.               7.00      14 - 7.00 = 7.00        antilogarithm of 7.00 = 10⁻⁷

c.                7.93      14 - 7.93 = 6.07        antilogarithm of 6.07 = 8.5 × 10⁻⁷

d.               12.59     14 - 12.59 = 1.41        antilogarithm of 1.41 = 0.039

e.               9.82      14 - 9.82 = 4.18        antilogarithm of 4.18 = 6.6 × 10⁻⁵

From which you see that the highest concentration of hydroxide ions is for pH = 12.59.

The pH with the highest hydroxide ion is 12.59

pH is the degree of acidity or alkalinity in a solution.

The lower the pH, the higher the acidity.The higher the pH the higher the basicity.

When the concentration is higher, it has more hydroxide ion.

Therefore, The pH with the highest hydroxide ion is 12.59 because the higher the pH the higher the concentration of the hydroxide ion.

Learn more about pH from the link below.

https://brainly.com/question/13557815

Answer:

= 6.32 Joules

Explanation:

The heat given off by a substance while changing from liquid state to solid state without change in temperature is given by the formula;

Q = n×Lf

where, Q is the heat quantity, n is the number of moles and Lf is the molar heat of fusion. The methanol HF is 3.16 kJ/mol.

The number of moles = 64 g/32 g/mol

                                   = 2 moles

Therefore;

Heat = 2 moles × 3.16 kJ/mol

        = 6.32 Joules

Answer:

6.32 kJ

Explanation:

took the test

Answer:

[tex]\boxed{\text{(C) X}$_{3}$P$_{2}}[/tex]

Explanation:

Step 1. Identify the Group that contains X

We look at the consecutive ionization energies and hunt for a big jump between them

[tex]\begin{array}{crc}n & IE_{n} & IE_{n} - IE_{n-1}\\1 & 730 & \\2 & 1450 & 720\\3 & 7700 & 6250\\4 & 10500 & 2800\\\end{array}[/tex]

We see a big jump between n = 2 and n = 3. This indicates that X has two valence electrons.

We can easily remove two electrons, but the third electron requires much more energy. That electron must be in the stable, filled, inner core.

So, X is in Group 2 and P is in Group 15.

Step 2. Identify the Compound

X can lose two valence electrons to reach a stable octet, and P can do the same by gaining three electrons.

We must have 3 X atoms for every 2 P atoms.

The formula of the compound is [tex]\boxed{\text{X}$_{3}$P$_{2}}$}[/tex].

Answer:

Explanation:

The relation between the momentum and the wavelength of a particle is given by De Broglie's equation:

Therefore, as per De Broglie's equation, the momentum of an electron and its wavelength are inversely related, meaning that if the momentum of an electron were doubled its wavelength would be shortened to half the original value.

Absolutely an acid ,because:

1)we it is sulfuric acid s molecular formula

2) in its shape H atom bonded with (O),not central atom

Answer:

A. An acid

Explanation:

Hello,

In inorganic chemistry, oxyacids are characterized by the presence of hydrogen, a nonmetal and oxygen as they are formed when an acid oxide (formed with a  nonmetal and oxygen) reacts with water. In this case, as the molecule has hydrogen, sulfur and oxygen, such constituting atoms match with the definition of an oxyacid, that is why H₂SO₄ is an acid.

Best regards.

Answer:

228.6 g of H₂O

Explanation:

the balanced equation for the combustion of methane is as follows

CH₄ + 2O₂ ---> CO₂ + 2H₂O

molar ratio of CH₄ to H₂O is 1:2

when 1 mol of CH₄ reacts with excess O₂, 2 mol of H₂O is formed

therefore when 6.35 mol of CH₄ reacts - 2 x 6.35 mol = 12.7 mol of H₂O is formed

therefore mass of H₂O formed is - 12.7 mol x 18 g/mol = 228.6 g of H₂O is formed

Final answer:

Using the stoichiometry of the balanced chemical equation CH4 + 2O2 → CO2 + 2H2O, 6.35 moles of methane produce 12.7 moles of water, which is equal to 228.854 grams of water.

Explanation:

To find out how many grams of water (H₂O) are produced from the combustion of 6.35 moles of methane (CH₄), we need to use the stoichiometry of the balanced chemical equation, which is CH₄ + 2O₂ → CO₂ + 2H₂O.

According to the equation, each mole of methane produces 2 moles of water. Therefore, 6.35 moles of methane will produce 6.35 * 2 = 12.7 moles of water. The molar mass of water is 18.02 g/mol, so the total mass of water produced is 12.7 moles * 18.02 g/mol = 228.854 g of H₂O.

Answer:

False this is like the definition of temperature

Explanation:

Answer:

Conserved

Explanation:

In balancing nuclear reaction equations, there is conservation of mass numbers and atomic numbers, i.e the sum of the mass number on the product side must be equal to the sum of mass numbers on the reactant side.

Also, the sum of the atomic numbers on the product side must be equal to the sum of the atomic numbers on the reactant side.

Note: A nuclear reaction is a process in which a nucleus reacts with an elementary particle.

1. Find the mole of each reactant present and determine the limiting reactant 2. determine the mole of product produced through the mole ratio of the equation 3. convert to grams if the 'amount' refers to grams

Answer:

Some of the Alpha particles shot at the gold foil bounced back.

Explanation:

Rutherford observed that most of the alpha particles shot at the gold foil went straight through the foil.

The alpha-particle scattering experiment is an important experiment that led Rutherford to give an accurate description of the distribution of positive and negative charges within the atom. Alpha particle source is placed in the lead cavity. The alpha particles emitted by the source are collimated into a narrow beam with the help of lead and slit.

The observations of Rutherford’s Alpha Scattering Experiment are: First, he observe that most of the α-particles that are bombarded towards the gold sheet pass away the foil without any deflection, and hence it shows most of the space is empty.

The correct answer is option B.

Learn more about the alpha-particle scattering experiment, refer:

https://brainly.com/question/8513004

#SPJ2

Answer:

3.

Explanation:

Al(OH)₃ + 3 HCl → AlCl₃ + 3H₂O,

It is clear that 1.0 mole of Al(OH)₃ reacts with 3.0 mole of HCl to produce 1.0 mole of AlCl₃ and 3.0 moles of H₂O,

So, the coefficient of HCl is 3.