What is one reason why rock layers are not horizontal
Answer:
Because of the deposits.
Explanation:
One of the reasons why rocks layers are not horizontal is because of the deposits and kinds of the walls that are next of the deposits
They are not necessarily always parallel. They have a natural inclination delimited by the walls.
This is determined by the age of the strata; the youngest deposits are taking the form of the oldest deposit.
However, part of the unique factors that determine the deposits (shape and alignment) of the layers are the organisms that lived and, therefore, could be fossilized. These factors are not repeatable since they are organisms that will not exist again.
Fossils are an essential part of the Earth's layers, as they help study the stages and shapes of the layers.
There is also another factor when magma is introduced in the form of a fault line and crystallizes in the middle of the Earth's layers. modifying the sequence of the affected rocks, becoming a young layer (not horizontal, due to its penetration into the layers of the Earth).
Amy has a mass of 50kg she is riding a skateboard traveling 10m/s what is her momentum?
which two tools below would be the most useful in testing how the mass of an object can affect the distance it moves after being pushed
The two tools that would be most useful in testing how the mass of an object can affect the distance it moves after being pushed are balance and meter stick. The correct option is b.
What are tools?Any object used to accomplish a task can be referred to as a tool. Equipment typically refers to a collection of tools used to accomplish a particular task. A tool can also be non-mechanical.
The hammer, the wrench (also known as a spanner), the saw, the shovel, the phone, and the computer are some examples of tools that are often used nowadays. Tools can also be quite basic items like knives, pens, and pencils. One of the very first tools created by humans was the bludgeon, which is a stick or rock used as a weapon to destroy things.
Therefore, the correct option is b, Balance, and meter stick.
To learn more about tools, refer to the link:
https://brainly.com/question/14830872
#SPJ2
The question is incomplete. Your most probably complete question is given below:
Spring scale and hot plate
Balance and meter stick
Graduated cylinder & beaker
Magnet & thermometer
When a covalent bond forms between two atoms how many atoms have a full outer shell of electrons?
A. one
B. two
C. Zero
D. It depends on what the atoms are
Making a diagram show the forces acting on the coasting bike rider traveling 25 km/h on a flat Roadway
A physicist wants to examine the characteristics of the new material the physicist will most likely do so by what method?
A survey a group of people
B perform fieldwork in a remote location
C perform laboratory experiments
D make observations of an ecosystem
PLEASE EXPLAIN ANSWER
becquerel thought that ____ was necessary for minerals to give to give off energy that passed through paper?
A- water
B- sunlight
D- uranium
Find the work done by a 25N force applied for 6 meters
Answer: W = 150J
Explanation: The work is defined as a measure of energy transfer when an object is moved by an external force.
So if we are applying a force of 25N for 6 meters, the work is done can be calculated as:
W = F*D where F is a force, and D is distance.
W = 25N*6m = 150 N*m
And Newton*meter = joule, so we have that:
W = 150J
What is the approximate weight of a 20-kg cannonball on Earth? 2 N 20 N 196 N 1,960 N
Answer:
Weight of the cannonball, W = 196 N
Explanation:
Mass of the cannonball, m = 20 kg
We need to find its weight on earth. The weight of an object on the earth can be calculated by the product of mass and acceleration due to gravity as :
[tex]W=m\times g[/tex]
[tex]W=20\times 9.8[/tex]
W = 196 N
So, the weight of the cannonball on the Earth's surface is 196 N. Hence, this is the required solution.
A force is applied to an object at rest with a mass of 100kg. A force twice as large is applied to another object at rest with a mass of 100kg. What differences in their motion would you observe? Explain your reasoning.
How can friction also be considered as an advantage in real life ?
What can cause a gap in the rock record
Answer:
The gaps in the rock are known as discontinuities that are basically caused by erosion. The unconformities in the rock is mainly caused by the erosion that represent the irregular line on the surface of the rock. The layer of each rock create a gap between the upper and the lower layer.
Sometimes, the process of the over thrust can cause the gap on the surface of the rocks as the layer of the rock are set one over the another in the geological rock records.
Help me plz (this is middle school science)
Explanation:
Location A receives 200cm of rain each year, while Location B receives only 30cm because in location A cloud rises, and it expands and cools down because the surrounding atmospheric pressure decreases, then the cloud gets too large and falls down as rain. Whether in location B, this land is covered by rain shadow and receives less rain.
Once the rain passes from mountain range and it moves down to the other side, warms and dries out. This produces a rain shadow. The land which is covered by rain shadow is very dry and receives less rain. Precipitation and cloud cover the land on windward side of the mountain range.
A 13-kg sled is moving at a speed of 3.0 m/s. At which of the following speeds will the sled have twice as much kinetic energy?
Which equation is used to determine the density of a substance? D = M/V D = M X V D = V/M D = MV2
Every substance, body or material has mass and volume, however the mass of different substances, bodies or materials occupy different volumes.
This is where density appears as a physical characteristic property of matter that establishes a relationship between the mass of a body or substance and the volume it occupies.
In formal words:
Density [tex]D[/tex] is defined as the relationship between the mass [tex]M[/tex] and volume [tex]V[/tex] of a specific substance or material and is expressed in the following equation:
The density is a scalar quantity and according to the International System of Units its unit is [tex]D=\frac{kg}{m^{3}}[/tex]
It should be noted that the density of a body is related to its buoyancy, a substance or body will float on another fluid if its density is lower.
What does this mean Atoms and elements are the basic back bone of the universe .
Why can certain stars sometimes be identified as eclipsing binary stars?
This question is incomplete. Here is the complete question:
1. Why can certain stars sometimes be identified as eclipsing binary stars?
A. They are brighter than any single star
B. They are all white dwarfs
C. They become dimmer at regular intervals
D. They are cool red stars
Answer:
The correct answer is option C. They become dimmer at regular intervals .
Explanation:
Eclipsing binary stars are those that we can see as a point of light, but in reality they are two stars that orbit one close to the other.
When one star passes in front of the other, the observer can see how the intensity of the brightness varies. Algol is the best known eclipsing binary star and has an eclipse interval of 173 hours (2.9 days).
These stars orbit an eclipsing binary star system, where one star outshines another.
What is the chemical formula for chalk
Which of the following answers describe how to calculate the acceleration of an object?
A. Divide the change in the objects velocity by the time it takes to make that change.
B. Divide the time the object travels by the distance it travels.
C. Calculate the distance the object travels and divide that by the time it takes to get there.
D. Calculate the velocity of an object and divide that by the time the object is in motion.
A. Divide the change in the objects velocity by the time it takes to make that change.
Explanation:
Acceleration is a vector quantity whose magnitude is given by the following equation:
[tex]a=\frac{\Delta v}{\Delta t}[/tex]
where
[tex]\Delta v[/tex] is the change in velocity of the object
[tex]\Delta t[/tex] is the time it took to make the change in velocity
Therefore, we see that this equation corresponds to choice A.
acceleration is defined as the rate of change for which characteristic? a. displacement b. position c. velocity d. time
A glacier is eroding the land over which it passes. It moves at a rate of 2 m per day. Currently, the glacier is 80 km from a small village. At current rates of movement, how many years before the glacier reaches the village? Plz help its due tomorrow and ill mark u brainliest!
Final answer:
It would take approximately 109.59 years for the glacier moving at a rate of 2 meters per day to reach the village that is 80 kilometers away.
Explanation:
The student asked how many years it would take for a glacier moving at a rate of 2 meters per day to cover the distance to a village that is currently 80 kilometers away. To solve this problem, we need to first convert the distance from kilometers to meters. Since 1 kilometer equals 1,000 meters, the distance in meters is 80 km × 1,000 = 80,000 meters.
Next, we calculate the number of days it would take to travel this distance by dividing the total distance by the daily movement rate of the glacier. The calculation would be 80,000 meters ÷ 2 meters/day = 40,000 days.
Finally, to find the number of years, we divide the number of days by the number of days in a year. This is 40,000 days ÷ (1 year/365 days) = 109.59 years. So, it would take approximately 109.59 years for the glacier to reach the village at the current rate of movement.
What is the name of the large pore through which filtered water leaves the body of the sponge? A. ostium B. flagellum C. osculum D. canal.
The name of the large pore through which filtered water leaves the body of the sponge is osculum. The correct option is C.
What is a sponge?Sponges, members of the phylum Porifera, are a basal animal clade and the diploblasts' sister.
They are multicellular organisms with pores and channels that allow water to circulate through their bodies, which are made up of jelly-like mesophyll sandwiched between two thin layers of cells.
To obtain energy, animals require nutrients from other animals and plants. Because sea sponges lack chloroplasts and do not generate energy from sunlight, they are classified as animals.
Water is pumped directly into the sponge through pores called ostia and then out through an opening called the osculum.
The spongocoel is lined with choanocytes, which are specialized digestive cells that filter and absorb food.
Thus, the correct option is C.
For more details regarding sponges, visit:
https://brainly.com/question/3606056
#SPJ6
What is the name of the hair-like structures on sponge cells that move back and forth to help move water, nutrients, and waste through the canal? A. ostia B. flagella C. osculum D. canal
What is the force on a 1000 kilogram elevator that is falling freely under acceleration of gravity only? If the formula is force equals mass times acceleration
Sam exerted an average force of 30 N to move a piano.how much work was required to moved the piano forward 6 m in 10 s
Select all that Apple
Which of the following is true about acids A.most acids are sour
B.most acid's Corrode metals
C.every acid contains hydrogen
D.acids have a pH of greater than seven
what is the answer and what would the work be?
If it is June or July and you live in the southern hemisphere, describe the position of the Earth, in relation to the sun, and what type of temperatures you would experience.
what are the two main factors that affect how quickly a coastline erodes?
The topography and climate of an area, particularly wind and temperature, are the key factors determining how quickly a coastline is subject to erosion.
Explanation:The two main factors that affect how quickly a coastline erodes are topography and climate.
The term 'topography' refers to the arrangement of the natural and artificial physical features of an area, and these physical features, or 'lay of the land', can influence erosion. For example, water runoff can strip away land material, leading to erosion, and steep areas are more prone to erosion than flat or leveled terrains.
On the other hand, the climate of a location, or more specifically wind and temperature, has a significant effect on coastline erosion. Areas characterized by high winds or rapid temperature changes can experience faster erosion due to increased rates of evaporation, transpiration, and disruptions in ocean currents triggered by wind or temperature variance.
Learn more about Coastline Erosion here:https://brainly.com/question/33646455
#SPJ2
Roseanne heated a solution in a beaker as part of a laboratory experiment on energy transfer. After a while, she noticed the liquid solution began to circulate within the beaker. What process involving heat transfer did Roseanne observe inside the beaker?
The process involving heat transfer did Roseanne observe inside the beaker is known as convection.
What is convection?The process of convection involves the movement of heated fluid, including air or water, in order to transfer heat.
Natural convection is caused by the fact that most fluids have a tendency to expand when heated, which causes them to become less thick and rise due to increased buoyancy.
The consistent heating of air inside a heated room or water in such a kettle is due to circulation generated by this effect: heated molecules widen the space that it move in by moving faster toward one another, raise, and thereafter cool and close again, increasing density and causing a consequent sinking.
Forced convection refers to the movement of fluid by means other than those brought on by changes in density with temperature.
To know more about Convection:
https://brainly.com/question/4138428
#SPJ2
Roseanne observed convection, where heat is transferred through the liquid in the beaker, causing hot liquid to rise and cool liquid to sink, which forms a circulation pattern. This process continues with the presence of a heat source.
Roseanne observed the process of convection inside the beaker during her laboratory experiment involving heat transfer. In this process, the heat transferred to the solution causes the hotter, less dense liquid to rise, while the cooler, denser liquid sinks. This creates a circulation pattern within the beaker as the warmer part of the solution expands and rises, transferring heat to other regions, and the cooler part of the solution descends. This circulation due to convection continues as long as there is a heat source to maintain the temperature difference.
Common examples of convection in daily life include a barista steaming milk to make hot cocoa, or the natural circulation patterns observed in the atmosphere due to the heating of the Earth's surface by the sun. It is one of the three methods of heat transfer, which also include conduction and radiation.