Four different observers are standing in a straight line on a street and hear a siren from a police car. Each person recorded their observations in the chart shown.



If the people are all lined up on the street at different blocks, and the police siren starts at block 3, which statement describes what block each person is standing at?

Wycleff is on block 1, Lilly is on block 4, Quincy is on block 12, and Emilia is on block 17.
Lilly is on block 1, Wycleff is on block 4, Quincy is on block 12, and Emilia is on block 17.
Lilly is on block 1, Wycleff is on block 4, Emilia is on block 12, and Quincy is on block 17.
Wycleff is on block 1, Lilly is on block 4, Emilia is on block 12, and Quincy is on block 17.

The force with which I push down on the Earth is PRECISELY equal to the force with which the Earth pushes UP on me.  

I weigh EXACTLY the same amount on the Earth as the Earth weighs on me.  Find THAT amount, and you'll have the answer to the question.

(Hint:  1 kg is a mass, and 2 pounds is a force, so they can never be equal.  1kg weighs about 2.2 pounds IF it happens to be on Earth.  But if the same 1kg is on the Moon, then it weighs about 5.8 ounces.  And if it happens to be on Mars, then it weighs about 13.3 ounces.  The same kilogram weighs different weights in different places.)

On a good day, I push down on the Earth with about 890 Newtons of force.  No matter how hard I try, I can never push more or less than that.

Force is the product of mass and acceleration. The force that an average person pushes down on the earth is about 598 N.

It is defined as the product of the mass and acceleration. It is measured in Newton.

[tex]F= m a[/tex]

Where,

[tex]F[/tex] - force

[tex]m[/tex] - mass = 60 kg

[tex]a[/tex]- acceleration = 9.8 m/s²

Put the values in the formula,

[tex]F= 60 \times 9.8 \\\\F = 598 \rm \ N[/tex]

Therefore, the force that an average person pushes down on the earth is about 598 N.

Learn more about Force:

https://brainly.com/question/26115859

Answer:

The amount of Potential Energy lost in the form of Thermal Energy is equal to 41.64 MJ.

Explanation:

mass of the cart and passengers = m = 3.5*10⁴ kg

Height = h = 126.5 m

g = 9.8 ms⁻²

v = 10 ms⁻¹

At the top position the Total energy of the ride is in the form of potential energy given as:

P.E = mgh

= 3.5*10⁴*9.8*126.5

= 43389500 J

At the bottom of the drop, all the Potential Energy will be converted into K.E as the ride develops speed given as:

K.E = 0.5*m*v²

= 0.5*3.5 x 10⁴*100

= 1750000 J

The K.E is much less than the P.E energy even though all the P.E of the ride has been converted. The loss of energy is due to the formation of thermal energy which can be calculated as:

Thermal Energy lost = Total energy in the form of P.E(top) - Total energy in the form of K.E(bottom)

= 43389500 -  1750000

= 41639500 J

= 41.64 M J approx             M J = mega joule = 10⁶ J

Answer:A little bit movement

Explanation:

Answer:

all of them

Explanation:

ape x

Answer:

B) the force of gravity

Every mass is attracted to each other in the universe through the force of gravity.

Sunny~ ☺

Answer:

The answer is precision.

Answer:

Precision

Explanation:

Accuracy is the measure of how close to the actual value a reading is. Precision refers to the degree of closeness the values are to each other while taking a reading.

For example, if a manufacturer says the length of the table is 50 cm, then if you measure it you should also get 50 cm reading, this shows the reading is accurate. If the reading of the table is taken multiple times then if the values are suppose 49.9, 49.94 etc, then the reading is precise.

Answer:

They must be cooler than the air inside the house.

Explanation:

The metal aluminum coils in an air conditioner conduct thermal energy from inside the house and release it outside the house. It is true to say that the coils are cooler than the air inside the house when they are accepting the heat inside the house. Heat will always flow from hot to cold substances

The aluminum coils in an air conditioner act as evaporator coils when accepting heat inside the house, absorbing thermal energy and transferring it outside after the refrigerant is compressed and condenses to a liquid.

When the aluminum coils in an air conditioner are accepting heat inside the house, they are acting as evaporator coils. During this phase, the coils absorb thermal energy from the indoor air. The electrically driven compressor works to raise the temperature and pressure of the refrigerant, causing it to transfer thermal energy and condense into a liquid. This liquid then moves to the outside of the house, where it passes through a pressure-reducing valve into the outdoor evaporator coils. Here, it expands and cools down, releasing the absorbed heat to the outside environment. This process is dictated by the principles of thermodynamics and is a practical application in cooling a home. Air conditioners and refrigerators work based on the same concept, where their efficiency is measured by the amount of heat transfer per work input, often expressed through the coefficient of performance (COP).

Answer:

condensation or distillation

Explanation:

Answer: condensation

Explanation:

Answer:

forebrain,midbrain, and hindbrain i think if that what your talking about? hope it helps

Explanation:

the areas are divided into Occipital lobe, Temporal lobe, Parietal lobe, Frontal lobe, cerebral cortex, cerebellum, hypothalamus, Thalamus, pituitary gland, pineal gland, amygdala, hippocampas and the midbrain.

Answer:

Forebrain, Midbrain, and Hindbrain.

Explanation:

Brain is complex structure which is work as control center of the whole body. Brain is helping in receive, send, processes and direct the sensory information. Brain is divided into three key regions with each having different functions.

Forebrain: It is known as the largest part of the brain. Optic cranial nerve and the olfactory are present on the forebrain part. Cerebrum is also the part of the forebrain which cover the 2-3rd part of the brain structure.

Midbrain: It connects the forebrain to the hindbrain. Brainstem which is formed by the composition of Midbrain and Hindbrain, helping to connect the cerebrum with spinal cord. Midbrain helping in to regulate movements and visual signals.

Hindbrain: It is composed of two subregions metencephalon and myelencephalon. It is helping in mentioning of equilibrium and balance, regulation of autonomic functions and coordination in movements.

Answer:

Its True

Explanation:

The difference between a red shift and a blue shift is as follows;

Red shift: In the red shift, light changes as the object in space (such as star or galaxies) moves away from us then the light is shifted to red end.The light is shifted to a shorter frequency. In this case, the light is shifted to a longer wavelength.

Answer:

true

Explanation:

Answer:

[tex]43.2^{\circ}C[/tex]

Explanation:

The change in temperature of the sample of alcohol is given by:

[tex]\Delta T=\frac{Q}{mC_s}[/tex]

where

Q = 890 J is the amount of heat provided to the sample

m = 16.6 g is the mass of the sample

[tex]C_s = 2.47 J/gC[/tex] is the specific heat of alcohol

Solving the equation,

[tex]\Delta T = \frac{890 J}{(16.6 g)(2.47 J/gC)}=21.7^{\circ}C[/tex]

And since the initial temperature was

[tex]T_i = 21.5^{\circ}C[/tex]

the final temperature is

[tex]T_f = T_i + \Delta T=21.5^{\circ}C + 21.7^{\circ}C=43.2^{\circ}C[/tex]

Answer:

This is the electromagnetic spectrum.

Explanation:

The electromagnetic spectrum is the range of frequencies of electromagnetic radiation and their respective wavelengths and photon energies. Hope this helps have a great day!

Answer:

B. EMR (Electromagnetic Radiation)

Explanation:

The Electromagnetic Radiation Spectrum consists of photons of all energies. It contains a series of high energy gamma rays to low energy microwaves. The spectrum contains waves in increasing order of the their frequency and decreasing wavelength. In vacuum, all the EMR travel with speed of light c.

Answer:

an example of an exthermic process is combustion

Explanation:

combustion is like lighting a candle

Answer:true, diamonds will scratch quartz.

Explanation: diamonds have a more compact composition. That is what makes them so hard. Quartz composition is not that compact, so diamond can scratch it.

The answer which lists the fundamental forces in order, from strongest to weakest is:

Fundamental forces are those necessary forces which acts on an object, changing its position

Nuclear force is the force which has to do with the nucleus of atoms

An electromagnetic force is one that has to do with en electrically charged particle.

Gravity is the force which acts on a mass of a body, pulling it downwards.

As a result of this, we can see that the strongest force is the nuclear force, while the weakest is the force of gravity.

Read more here:

https://brainly.com/question/4539561

Answer:

✅strong nuclear

A. is correct

Explanation:

Answer:

current moves from positive terminal of a cell towards the negative terminal of a cell.

Explanation:

this happens when good conductors which have free electrons moving randomly within them.when a cell i s connected across the ends the free electrons moves in a given direction. then the current starts flowing in a opposite direction with electrons which moves negative terminal to positive terminal.

Final answer:

Electric current in a circuit flows through a closed conducting path enabling charge flow, defined as electric current, with components connected by conducting wires.

Explanation:

Electric current in a circuit follows a closed conducting path. In circuits, charge flows through a complete loop, with the charge flow rate defined as electric current.

An example is a simple circuit with a battery, a switch, and a load like a light bulb connected by conducting wires to provide a pathway for current flow.

When analyzing circuits, wires are treated as perfect conductors, and schematics are used to represent components with standardized symbols and solid lines for connections.

Answer:

There is NO DATA??

Explanation:

Answer:copper

Explanation:

Answer:

True.

Explanation:

Answer:

electrons exist in specified energy levels

Explanation:

In its gold-foil scattering with alpha particles, Rutherford proved that the plum-pudding model of the atom theorised by Thomson was wrong.

From his experiment, Rutherford inferred that the atom actually consists of a very small nucleus, where all the positive charge is concentrated, and the rest of the atom is basically empty, with the electrons (negatively charged) orbiting around the nucleus at very large distance.

However, Rutherford did not specify anything about the orbits of the electrons. Later, Bohr predicted that the electrons actually orbit the nucleus in specific orbits, each orbit corresponding to a specific energy level. Bohr's model found confirmation in the observation of the emission spectrum lines: when an electron in one of the higher energy level jumps down into an orbit with lower energy, the atom emits a photon which has an energy exactly equal to the difference in energy between the two orbits (and this energy of the photon corresponds to a precise wavelength).

Answer:

A.electrons exist in specified energy levels surrounding the nucleus.

Is correct on edge!

Explanation:

Answer:

rocks form from the outer solid layer of the earth which is the crust

Explanation:

Answer:

Crust

Explanation:

Rock is a solid mass, a collection of minerals which occur naturally. There are three different types of rocks- Igneous, Sedimentary and Metamorphic. These vary in texture and composition. The rocks come from the upper most layer of the Earth- the crust. Heat, pressure, volcanoes, wind and water play important role in formation of rocks.

[tex]E = 7.45x10^{11} N/C[/tex]

The intensity of the electric field (E) or simply electric field at a point is a vector quantity representing the electric force (F ) that acts over a charge, Q', located at that point.

[tex]E=K\frac{Q}{r^{2}}[/tex], where K is the constant of propotionality, Q a charge, and r the distance between a point and the charge.

[tex]E = 9x10^{9} \frac{Nm^{2} }{C^{2} } \frac{0.0025C}{(0.0055m)^{2}}[/tex]

[tex]E = 7.45x10^{11} N/C[/tex]

The magnitude of the electric field 0.0055 m from a 0.0025 C charge is calculated using Coulomb's law, resulting in an electric field strength of 7.45 x 10¹¹ N/C.

The magnitude of the electric field at a certain point from a point charge. The formula to calculate the electric field (E) due to a point charge (q) at a distance (r) is given by Coulomb's law, E = k x |q| / r₂, where k is Coulomb's constant (8.99 x 109 Nm₂/C₂). For a charge of 0.0025 C at a distance of 0.0055 m, the magnitude of the electric field can be calculated by substituting these values into the formula.

First, substitute the known values into the equation: E = (8.99 x 109) x (0.0025) / (0.00552).
Next, perform the calculation: E = (8.99 x 10⁹) x (0.0025) / (0.00003025), which simplifies to E = 7.45 x 10¹¹ N/C.

This is the magnitude of the electric field at 0.0055 m from a 0.0025 C charge. The electric field strength indicates the force per unit charge that a test charge would experience in the vicinity of the source charge.

Answer:

B. distance

Explanation:

leads to 9.4607 × 1012 km the length of how it is associate that is traveled by light for a year in an astronomical unit of distance.

♡

Answer:

B) Distance

Explanation:

Think about how a light year is used.

Here is proof that my answer is correct:

Answer:

Zero (0)

Explanation:

A horizontal line will be no movement of negative of positive acceleration

Answer:

Zero acceleration

Explanation:

In a velocity-time graph, the gradient of the line describes how the acceleration varies.When the gradient is positive, it means we have a line that is upward sloping thus the accelaration is positive.When we have a negative gradient, it means the line is downward sloping thus the accelaration is negative.When the gradient is zero, there is no slope, thus the accelaration is zero, the case of a horizontal line.

Answer: gears and brakes cause friction

The two engineering appliances which uses friction​ include

Gears experience friction despite it being lubricated as that only reduces the

wear and tear effect. Friction in gear takes place at the interface of

lubricated tooth parts which undergo rolling and sliding movements.

Brakes also experience friction when applied in which the brake pads touch

the brake discs thereby creating friction. The heat generated from the

friction helps to resists and slow down the the motion of the wheels of the

car.

Read more on https://brainly.com/question/12871437

Answer:

A and B

Explanation:

Because both of them have only magnitude not direction.

Answer:

I think it's either A or B. but i'm going to say B.

Explanation:

Hope my answer has helped you if not i'm sorry.

Answer:

Gravitational field

Explanation:

An object of mass M exerts a force (gravitational force) of attraction on any other object of mass m. The magnitude of this force is

[tex]F=G\frac{Mm}{r^2}[/tex]

where G is the gravitational constant and r the separation between the two objects.

Since the object of mass M exerts this force on any other object located around it, we can think as a "gravitational field", which is the region of space around the object of mass M that exerts a gravitational force on other object. This way, the force exerted on another object of mass m can be rewritten as

F = mg

where

[tex]g=\frac{GM}{r^2}[/tex]

is called strength of the gravitational field.

Answer:

It can exert a greater force through a greater distance than the force used on the machine.

Explanation:

A machine is a device that makes work easier and so it should exert greater force than the force applied on it.

Answer:

she is correct

Answer:

The ability of our bodies to adapt to different levels of gravity. You would become weaker and your heart is use to zero gravity. Boredom because there isn't much to in space. When intelligent people get bored, it's not pretty all the time...

Answer:

All these laws give the relationship between two quantities of the gas among V (volume), p (pressure) and T (temperature), keeping the third one constant - however the two quantities change for each law

Explanation:

Calling:

p = gas pressure

V = gas volume

T = gas temperature (in Kelvin)

We have:

- Boyle's law: the pressure and the volume of a gas kept at constant temperature are inversely proportional. Mathematically,

[tex]pV=const.[/tex]

- Charles's law: the temperature and the volume of a gas kept at constant pressure are directly proportional. Mathematically,

[tex]\frac{V}{T}=const.[/tex]

- Gay Lussac's law: the temperature and the pressure of a gas kept at constant volume are directly proportional. Mathematically,

[tex]\frac{p}{T}=const.[/tex]