For the following functions, determine if the functions are periodic. If so, find the shortest period. A. x(t) = (t2-1)cos(t) B. x(t)-cos(nt) +5 sin(5πt) C. x[n] = sin[n] + cos[n] D. x(t) cos(3t) + sin(Tt) E. x[n] = cos(m) + 1 F. x(t)-(sin nt)(cos πt) | 2
Answers
Answer:
A Not Periodic
B Periodic
C Periodic
D Not Periodic
E Periodic
F Periodic
Explanation:
The detailed steps to ascertain the periodicity or the non periodicity of each functions is as shown in the attached file.
Related Questions
Consider an 8-car caravan, where the propagation speed is 100 km/hour, each car takes 1 minute to pass a toll both. The caravan starts in front of toll booth A, goes through toll booth B, and ends after passing toll booth C. Let dAB and dBC be the distance between A-B, and B-C.
a. Suppose dAB = dBc = 10 km. What is the end-to-end delay if the caravan travels together (i.e., the first car must wait for the last car after passing each toll booth)?
b. Repeat a), but assume the cars travel separately (i.e., not waiting for each other).
c. Repeat a) and b), but suppose dAB = dBC =100 km
d. Still suppose dAB = dBC = 100 km. Suppose toll booth B takes 10 minute to pass each car (A and C still takes 1 minute per car). Where is the first car when the second car passes B?
e. Under the assumption of d), what is the maximum value of dBC such that the first car has passed C when the second car passes B?
Answers
Answer:
A. 36 minutes
B. 120 minutes
C.
i. 144 minutes
ii. 984 minutes
D. Car 1 is 1.67km ahead of Cat 2 when Car 2 passed the toll B.
E. 98.33km
Explanation
A.
Given
dAb = 10km
dBc = 10km
Propagation Speed = 100km/hr
Delay time = 1 minute
Numbers of cars = 8
Number of tolls = 3
Total End to End delay = Propagation delay + Transition delay
Calculating Propagation Delay
Propagation delay = Total Distance/Propagation speed
Total distance = 10km + 10km = 20km
So, Propagation delay = 20km/100km/hr
Propagation delay = 0.2 hour
Translation delay = delay time* numbers of tolls * numbers of cars
Transitional delay = 1 * 3 * 8
Transitional delay = 24 minutes
Total End delay = 24 minutes + 0.2 hours
= 24 minutes + 0.2 * 60 minutes
= 24 minutes + 12 minutes
= 36 minutes
B.
Total End to End delay = Propagation delay + Transition delay
Calculating Propagation Delay
Propagation delay = Total Distance/Propagation speed
Total distance = 10km + 10km = 20km
So, Propagation delay = 20km/100km/hr
Propagation delay = 0.2 hour
Translation delay = delay time* numbers of tolls ------ Cars traveling separately
Transitional delay = 1 * 3
Transitional delay = 3 minutes
Total End delay for one car = 3 minutes + 0.2 hours
= 3 minutes + 0.2 * 60 minutes
= 3 minutes + 12 minutes
= 15 minutes
Total End delay for 8 cars = 8 * 15 = 120 minutes
C.
Given
dAb = 100km
dBc = 100km
Propagation Speed = 100km/hr
Delay time = 1 minute
Numbers of cars = 8
Number of tolls = 3
i. Cars travelling together
Total End to End delay = Propagation delay + Transition delay
Calculating Propagation Delay
Propagation delay = Total Distance/Propagation speed
Total distance = 100km + 100km = 200km
So, Propagation delay = 200km/100km/hr
Propagation delay = 2 hours
Translation delay = delay time* numbers of tolls * numbers of cars
Transitional delay = 1 * 3 * 8
Transitional delay = 24 minutes
Total End delay = 24 minutes + 2 hours
= 24 minutes + 2 * 60 minutes
= 24 minutes + 120 minutes
= 144 minutes
ii. Cars travelling separately
Total End to End delay = Propagation delay + Transition delay
Calculating Propagation Delay
Propagation delay = Total Distance/Propagation speed
Total distance = 100km + 100km = 200km
So, Propagation delay = 200km/100km/hr
Propagation delay = 2 hours
Translation delay = delay time* numbers of tolls ------ Cars traveling separately
Transitional delay = 1 * 3
Transitional delay = 3 minutes
Total End delay for one car = 3 minutes + 2 hours
= 3 minutes + 2 * 60 minutes
= 3 minutes + 120 minutes
= 123 minutes
Total End delay for 8 cars = 8 * 123 = 984 minutes
D.
Distance = 100km
Time = 1 min/car
Car 1 is 1 minute ahead of car 2 --- at toll A and B
If car 1 leaves toll B after 10 minutes then cat 2 leaves after 11 minutes
Time delay = 11 - 10 = 1 minute
Distance = time * speed
= 1 minute * 100km/hr
= 1 hr/60 * 100 km/hr
= 100/60
= 1.67km
E.
Given
Distance = 100km
Distance behind = 1.67
Maximum value of dBc = 100km - 1.67km = 98.33km
The maximum distance that can be reached is 98.33km
The winch on the truck is used to hoist the garbage bin onto the bed of the truck. If the loaded bin has a weight of 8500 lb and center of gravity at G, determine the force in the cable needed to begin the lift. The coefficients of static friction at A and B are ,MuA = 0.2 And MuB = 0.3 respectively. Neglect the height of the Support at A.
Answers
Answer:
T = 3600 lb
Explanation:
Given:
- coefficient of static friction @a u_a = 0.2
- coefficient of static friction @b u_b = 0.3
- Weight of the loaded bin W = 8500 lb
Find:
- Find the force in the cable needed to begin the lift.
Solution:
- Draw the forces on the diagram. see attachment.
- Take sum of moments about point B as zero:
(M)_b = W*12 - N_a * 22 = 0
N_a = W*12 / 22 = 8500*12 / 22
N_a = 4636.364 lb
- Compute friction force F_a @ point A:
F_a = u_a*N_a = 4636.364*0.2
F_a = 927.2727 lb
- Take sum of moments about point A as zero:
-W*10 - F_b*sin(30)*22+ 22*N_b*cos(30) + 22*T*sin(30) = 0
Where, F_b = u_b*N_b = N_b*0.3
Hence, -85000 - 3.3*N_b + 11sqrt(3)*N_b + 11 T = 0
15.753*N_b + 11*T = 85000 ...... 1
- Take sum of forces in x-direction equal to zero:
T*cos(30) - N_b*sin(30) - u_b*N_b*cos(30) - F_a = 0
T*cos(30) - 0.75981*N_b = 927.2727 ..... 2
- Solve two equation simultaneously:
T = 3600 lb , N_b = 2882 lb
A constant torque of 5 Nm is applied to an unloaded motor at rest at time t ¼ 0. The motor reaches a speed of 1800 rpm in 3 s. Assuming the damping to be negligible, calculate the motor inertia.
Answers
Answer:
The motor inertia is 7.958 X 10⁻² kg.m²
Explanation:
To determine the motor inertia, the following formula applies.
Neglecting the damping effect,
[tex]T = \frac{J}{9.55}.\frac{\delta n}{\delta T}[/tex]
Where;
T is the constant torque applied to the motor = 5Nm
J is the motor inertia = ?
δn is the change in angular speed of the motor = 1800 r/min
δT is change in time of the unloaded motor from rest = 3 sec
[tex]J = \frac{9.55* \delta T* T}{\delta n}[/tex]
[tex]J = \frac{9.55* 3* 5}{1800}[/tex] = 0.07958 kg.m² = 7.958 X 10⁻² kg.m²
Therefore, the motor inertia is 7.958 X 10⁻² kg.m²
Define the following terms in your own words: (a) elastic strain, (b) plastic strain, (c) creep strain, (d) tensile viscosity, (e) recovery, and (f) relaxation.
Answers
Answer:
Detailed Answer is given below,
Explanation:
(a) Elastic strain
Elastic deformation is defined as the limit for the deformation values up to which the object will bounce and return to the original shape when the load is removed.
When the object is subjected to an external load, it deforms. If the load exceeds the load corresponding to the elastic limit of the object, then, after removing the load, the object cannot return to its original geometric specification.
(b) Plastic strain
Plastic Strain is a deformation that cannot be recovered after eliminating the deforming force. In other words, if the applied tension is greater than the elastic limit of the material, there will be a permanent deformation.
(c) Creep strain
The deformation of the material at a higher temperature is much more than at the normal temperature known as creep.
Subsequently, the deformation produced in heated material is called creep deformation. Creep deformation is a function of temperature.
(d) Tensile viscosity
Viscosity is a main parameter when measuring flux fluids, such as liquids, semi-solids, gases and even solids. Brookfield deals with liquids and semi-solids. Viscosity measurements are made together with the quality and efficiency of the product. Any person involved in the characterization of the flow, in research or development, quality control or transfer of fluids, at one time or another is involved with some kind of viscosity measurement.
(e) Recovery
Recovery is a process whereby deformed grains can reduce their stored energy by eliminating or reorganizing defects in their crystalline structure. These defects, mainly dislocations, are introduced by plastic deformation of the material and act to increase the elastic limit of a material.
(f) Relaxation
Stress relaxation occurs in polymers when they remain tense for long periods of time.
These alloys have very good resistance to stress relaxation and, therefore, are used as spring materials.
Stress relaxation is a gradual reduction of stress over time in constant tension.
Fictional Corp is looking at solutions for their new CRM system for the sales department. The IT staff already has a fairly heavy workload, but they do not want to hire any additional IT staff. In order to reduce the maintenance burden of the new system, which of the following types of CRM should they choose to meet these needs?
a. IaaS
b. PaaS
c. SaaS
d. DBaaS
Answers
Answer:
SaaS
Explanation:
Software as a service (SaaS) is also called software on demand, it involves a third party that centrally hosts the software and provides it to the end user.
All aspects of hosting is handled by the third party: application, data, runtime, middleware, operating system, server, virtualization, storage and networking are all handled by the provider.
This is an ideal software service for Fictional corp, as there will be no need to hire additional IT staff to maintain the new CRM software.
Based on the graphs of stress-strain from the V-MSE site, how would you characterize the general differences between polymers and alloys in terms of mechanical properties?
a. Alloys are stronger, stiffer, but less ductile.
b. Polymers have a higher toughness.
c. Alloys have lower Young’s Modulus.
d. The properties overlap so you can’t really make any general statements.
Answers
Answer:
Option A
Explanation:
Alloys are metal compounds with two or more metals or non metals to create new compounds that exhibit superior structural properties. Alloys have high level of hardness that resists deformation thereby making it less ductile compared to polymers. This is due to the varying difference in the chemical and physical characteristics of the constituent metals in the alloy.
What happens to the current supplied by the battery when you add an identical bulb in parallel to the original bulb?
Answers
Answer:
a.The current is cut in half
b.the current stays the same
c.the current doubles
d.the current becomes zero
Explanation:
The current doubles
The following laboratory tests are performed on aggregate samples:a. Specific gravity and absorptionb. Soundnessc. Sieve analysis test.What are the significance and use of each of these tests (1 point each)?
Answers
Answer:
Explanation:
A- Specific gravity and Absorption Test: Specific gravity is a measure of a material’s density as compared to the density of water at 73.4°F (23°C). Therefore, by definition, water at a temperature of 73.4°F (23°C) has a specific gravity of 1. Absorption is also determined by the same test procedure and it is a measure of the amount of water that an aggregate can absorb into its pore structure.
Specific gravity is used in a number of applications including Superpave mix design, deleterious particle identification and separation and material property change identification while
B- Soundness Test : This determines an aggregate's resistance to disintegration by weathering and in particular, freeze-thaw cycles. Aggregates that are durable (resistant to weathering) are less likely to degrade in the field and cause premature HMA pavement distress and potentially failure.It is used to identify the excess amount of lime in cement.
C - Sieve analysis Test: is a practice or procedure used to assess the particle size distribution (also called gradation) of a granular material by allowing the material to pass through a series of sieves of progressively smaller mesh size and weighing the amount of material that is stopped by each sieve as a fraction of the whole mass. This test is used to describe the properties of the aggregate and to see if it is appropriate for various civil engineering purposes such as selecting the appropriate aggregate for concrete mixes and asphalt mixes as well as sizing of water production well screens.
Which of the following can be used as a case label in a switch-case statement? Please select all that apply.
Assume that FIVE is a constant int and five is an int.
#define FIVE 5
int five = 5;
a. five
b.FIVE
c.5
d.five++
e. FIVE + 1
Answers
Answer:
b, c, and e
Explanation:
The values that are used for case labels must be a constant expression.
Let's examine the options;
a. five -> declared as just int
b. FIVE -> declared as constant expression
c. 5 -> It is a constant expression
d. five++ -> incremented version of option a
e. FIVE+1 -> incremented version of option b
What are the purposes of the various types of drawings used for the design and erection of steel framed buildings?
Answers
Answer:
The main purpose the various types of drawing used for the design and erection of steel framed buildings is to successfully construct a solid and strong building
Explanation:
The main purpose the various types of drawing used for the design and erection of steel framed buildings is to successfully construct a solid and strong buildings.
Steel forms the skeleton of a building, essentially the part of the building that holds everything up and together. Steel has so many advantages when compared to other structural building material such as concrete, plastic, timber and composite materials.
A motor keep a Ferris wheel (with moment of inertia 6.8 × 107 kg · m 2 ) rotating at 12 rev/hr. When the motor is turned off, the wheel slows down (because of friction) to 9.6 rev/hr in 17 s. What was the power of the motor that kept the wheel rotating at 12 rev/hr despite friction? Answer in units of W.
Answers
Answer:
Power of the motor that kept the wheel rotating at 12 rev/hr despite friction is 342.79W.
Explanation:
Pls refer to the attached file. The explanation is long to pen down here.
Consider the following incomplete code segment, which is intended to print the sum of the digits in num. For example, when num is 12345, the code segment should print 15, which represents the sum 1 + 2 + 3 + 4 + 5.
int num = 12345;
int sum = 0;
/* missing loop header */
{
sum += num % 10;
num /= 10;
}
System.out.println(sum);
Which of the following should replace /* missing loop header */ so that the code segment will work as intended?
while (num > 0)
A
while (num >= 0)
B
while (num > 1)
C
while (num > 2)
D
while (num > sum)
E
Answers
Answer:
A) while (num >= 0)
Explanation:
To understand why we need to focus on the module and division operation inside the loop. num % 10 divide the number by ten and take its remainder to then add this remainder to sum, the important here is that we are adding up the number in reverse order and wee need to repeat this process until we get the first number (1%10 = 1), therefore, num need to be one to compute the last operation.
A) this is the correct option because num = 1 > 0 and the last operation will be performed, and after the last operation, num = 1 will be divided by 10 resulting in 0 and 0 is not greater than 0, therefore, the cycle end and the result will be printed.
B) This can not be the option because this way the program will never ends -> 0%10 = 0 and num = 0/10 = 0
C) This can not be the option because num = 1 > 1 will produce an early end of the loop printing an incomplete result
D) The same problem than C
E) There is a point, before the operations finish, where sum > num, this will produce an early end of the loop, printing an incomplete result
Loops are program statements that are used to carry out repetitive and iterative operations
The missing loop header is (a) while (num > 0)
To calculate the sum of the digits of variable num, the following must be set to be true
The loop header must be set to keep repeating the loop operations as long as the value of variable num is more than 0
To achieve this, we make use of while loop,
And the loop condition (as described above) would be num > 0
Hence, the true option is (a) while (num > 0)
Read more about loops at:
https://brainly.com/question/19344465
An air-standard Otto cycle has a compression ratio of 6 and the temperature and pressure at the beginning of the compression process are 520 deg R and 14.2 lbf/in^2, respectively. The heat addition per unit mass of air is 600 Btu/lb. Determine (a) the maximum temperature, in deg R.
Answers
Answer:
The maximum temperature of the cycle is 1065⁰R
Explanation:
The maximum temperature in degree Rankin can be obtained using the formula below;
[tex]\frac{T_2}{T_1} =[\frac{V_1}{V_2}]^{1.4-1}[/tex]
Where;
T₂ is the maximum temperature of the cycle
T₁ is the initial temperature of the cycle = 520 deg R = 520 ⁰R
V₁/V₂ is the compression ratio = 6
[tex]T_2 = T_1(\frac{V_1}{V_2})^{0.4}[/tex]
[tex]T_2=T_1(6)^{0.4}[/tex]
[tex]T_2=520^0R(6)^{0.4}[/tex]
T₂ = 1064.96 ⁰R
Therefore, the maximum temperature of the cycle is 1065⁰R
An urn contains r red, w white, and b black balls. Which has higher entropy, drawing k ~2 balls from the urn with replacement or without replacement? Set it up and show why. (There is both a hard way and a relatively simple way to do this.)
Answers
Answer:
The case with replacement has higher entropy
Explanation:
The complete question is given:
'Drawing with and without replacement. An urn contains r red, w white and b black balls. Which has higher entropy, drawing k ≥ 2 balls from the urn with replacement or without replacement?'
Solution:
- n drawing is the same irrespective of whether there is replacement or not.
- X to denotes drawing from an urn with r red balls, w white balls and b black balls. So, n = b + r + w.
We have:
p_X(cr) = r / n
p_X(cw) = w / n
p_X(cb) = b / n
- Now, if Xi is the ith drawing with replacement then Xi are independent and p_Xi (x) = pX(x) for x e ( cr , cb , cw ).
- Now, let Yi be the ith drawing with replacement where Yi are not independent p_Yi (x) = pX(x) for x ∈ X.
- To see this, note Y1 = X and assume it is true for Yi and consider Yi+1:
p_Y(i+1) (cr) = p(Y(i+1),Yi).(cr, cr) + p(Y(i+1),Yi).(cr, cw) + p(Y(i+1),Yi).(cr, cb)
= pY(i+1)|Yi (cr|cr)*pYi (cr) +pY(i+1)|Yi (cr|cw)*pYi (cw) + pY(i+1)|Yi (cr|cb)*pYi (cb)
= r*( r - 1 )/n*(n-1) + w*r/n*(n-1) + b*r/n*(n-1) = r / n = p_X(cr)
- This means, using the chain rule and the conditioning theore m:
H(Y1, Y2, . . . , Yn) = H(Y1) + H(Y2|Y1) + H(Y3|Y2, Y1) + ... H(Yn|Yn−1, . . . , Y1)
=< SUM H(Yi) = n*H(X) = H(X1, X2, . . . , Xn)
- with equality if and only if the Yi were independent:
H(Y1, Y2, . . . , Yn) < H(X1, X2, . . . , Xn)
Answer: The case with replacement has higher entropy
Calculate the change in enthalpy of 1.94 mol of PbO(s) if it is cooled from 732 K to 234 K at constant pressure.
Answers
Complete question:
The heat capacity of solid lead oxide is given by Cp,m=44.35+1.47×10⁻³T/K in units of J K−1 mol−1.
Calculate the change in enthalpy of 1.94 mol of PbO(s) if it is cooled from 732 K to 234 K at constant pressure.
Answer:
The change in enthalpy of PbO(s) is -39.488 x10³J
Explanation:
Given:
Initial temperature of PbO(s) (T₁) = 732 K
Final temperature of PbO(s) (T₂) = 234 K
[tex]\delta H = n\int\limits^{T_2}_{T_1} {C_p m} \, dT[/tex]
where;
Cp,m is the specific heat capacity of PbO(s)
[tex]\delta H = 1.94 molX\int\limits^{234}_{732} {[44.35 +1.47 X10^{-3}\frac{T}{K} ]} \,d (\frac{T}{K})[/tex]
[tex]\delta H = 1.94 molX {[44.35 (234-732) +1.47 X10^{-3}(\frac{234^2 -732^2}{2}) ]}[/tex]
= 1.94mol [(-19957.5)+(-396.9)]
= -38717.55 J -769.986J
= -39487.536 J
ΔH = -39.488 x10³J
Therefore, the change in enthalpy of PbO(s) is -39.488 x10³J
An electric field is expressed in rectangular coordinates by E = 6x2ax + 6y ay +4az V/m.Find:a) VMN if point M and N are specified by M(2,6,1) and N(-3, -3, 2).b) VM if V = 0 at Q(4, -2, -35)c) VN if V = 2 at P(1,2,4).Please show all steps
Answers
Answer:
a.) -147V
b.) -120V
c.) 51V
Explanation:
a.) Equation for potential difference is the integral of the electrical field from a to b for the voltage V_ba = V(b)-V(a).
b.) The problem becomes easier to solve if you draw out the circuit. Since potential at Q is 0, then Q is at ground. So voltage across V_MQ is the same as potential at V_M.
c.) Same process as part b. Draw out the circuit and you'll see that the potential a point V_N is the same as the voltage across V_NP added with the 2V from the other box.
Honestly, these things take practice to get used to. It's really hard to explain this.
The values of the potential differences for the three questions are;
A) [tex]V_{MN} = -147 V[/tex]
B) [tex]V_{MQ}[/tex] = -120 V
C) [tex]V_{N} = 51 V[/tex]
We are given the expression of the electric field as;
E = (6x² x^ + 6y y^ +4 z^) V/m
A) We want to find the potential difference between point M and N with coordinates M(2,6,1) and N(-3, -3, 2).[tex]V_{MN} = -\int\limits^M_N {E} \, dx[/tex]
Integrating this with the M and N coordinates as boundaries in mind gives;
[tex]V_{MN} = -[6\frac{x^{3}}{3} + 6\frac{y^{2}}{2} + 4z]^{2,6,1}_{-3,-3,2}[/tex]
[tex]V_{MN} = -[2{x^{3} + 3y^{2} + 4z]^{2,6,1}_{-3,-3,2}[/tex]
Plugging in those boundary values and solving using an online integral calculator gives;
[tex]V_{MN} = -147 V[/tex]
B) We are told that V = 0 at Q(4, -2, -35). Thus potential difference between point M and Q is;[tex]V_{MQ} = -[6\frac{x^{3}}{3} + 6\frac{y^{2}}{2} + 4z]^{2,6,1}_{4,-2,-35}[/tex]
[tex]V_{MQ} = -[2{x^{3} + 3y^{2} + 4z]^{2,6,1}_{4,-2,-35}[/tex]
Plugging in those boundary values and solving using an online integral calculator gives;
[tex]V_{MQ}[/tex] = -120 V
C) We are told that V = 2 at P(1,2,4). Thus potential difference between point V and N is;
[tex]V_{NP} = -[6\frac{x^{3}}{3} + 6\frac{y^{2}}{2} + 4z]^{-3,-3,2}_{1,2,4}[/tex]
[tex]V_{NP} = -[2{x^{3} + 3y^{2} + 4z]^{-3,-3,2}_{1,2,4}[/tex]
Plugging in those boundary values and solving using an online integral calculator gives; [tex]V_{NP} = 49 V[/tex]
Thus;
[tex]V_{N} = V + V_{NP}[/tex]
[tex]V_{N}[/tex] = 2 + 49
[tex]V_{N} = 51 V[/tex]
Read more about Electric field vectors at; https://brainly.com/question/13193669
A horizontal curve on a two-lane highway (10-ft lanes) is designed for 50 mi/h with a 6% superelevation. The central angle of the curve is 35 degrees and the PI is at station 482 + 72. What is the station of the PTand how many feet have to be cleared from the lane's shoulder edge to provide adequate stopping sight distance?
Answers
Answer:
The PT station is at 485+20.02 and 21.92 ft are to be cleared from the lane's shoulder to provide adequate stopping sight distance.
Explanation:
From table 3.5 of Traffic Engineering by Mannering
R_v=835
R=835+(10ft/2)= 840 ft.
Now T is given as
T=R tan(Δ/2)
Here Δ is the central angle of curve given as 35°
So
T=R tan(Δ/2)
T=840 x tan(35/2)
T=840 x tan(17.5)
T=264.85
Now
STA PC=482+72-(2+64.85)=480+07.15
Also L is given as
L=(π/180)RΔ
Here R is the radius calculated as 840 ft, Δ is the angle given as 35°.
L=(π/180)RΔ
L=(π/180)x840 x35
L=512.87 ft
STA PT=480+07.15+5+12.87=485+20.02
Now Ms is the minimum distance which is given as
[tex]M_s=R_v(1-cos(\frac{90 \times SSD}{\pi Rv}))\\[/tex]
Here R_v is given as 835
SSD for 50 mi/hr is given as 425 ft from table 3.1 of Traffic Engineering by Mannering
So Ms is
[tex]M_s=R_v(1-cos(\frac{90 \times SSD}{\pi Rv}))\\M_s=835(1-cos(\frac{90 \times 425}{\pi 835}))\\M_s=26.92 ft[/tex]
Now for the clearance from the inside lane
Ms=Ms-lane length
Ms=26.92-5= 21.92 ft.
So the PT station is at 485+20.02 and 21.92 ft are to be cleared from the lane's shoulder to provide adequate stopping sight distance.
5 kg of steam contained within a piston-cylinder assembly undergoes an expansion from state 1, where the specific internal energy is u1 = 2709.9 kJ/kg, to state 2, where u2 = 2659.6 kJ/kg.
During the process, there is heat transfer to the steam with a magnitude of 80 kJ. Also, a paddle wheel transfers energy to the steam by work in the amount of 18.5 kJ.
There is no significant change in the kinetic or potential energy of the steam.
Determine the energy transfer by work from the steam to the piston during the process, in kJ.
Answers
Answer:
Energy Transfer = 350 kJ
Explanation:
The net work can be determined from an energy balance. That is, with assumption
∆KE + ∆PE + ∆U = Q − W
Where
∆KE = ∆PE = 0 (Since There is no significant change in the kinetic or potential energy of the steam)
The net work is the sum of the work associated with the paddlewheel Wpw
and the work done on the piston Wpiston:
W = Wpw + Wpiston
From the given information, Wpw= −18.5 kJ,
Collecting results:
Wpw + Wpiston = Q − ∆U
Wpiston = Q − ∆U − Wpw= Q − m (u2− u1) − Wpw
Where Q=80kJ, m=5kg, u2 = 2659.6 kJ/kg, u1 = 2709.9 kJ/kg
= 80 kJ − 5 kg (2659.6 − 2709.9)kJ/kg − ( −18. 5 kJ)
= 350 kJ
The energy transfer by work from steam to piston is ; [tex]W_{p}[/tex] = 350 kJ
Given that ;
ΔU = ( 2659.6 - 2709.9 ) = - 50.3 kJ/Kg
Q ( heat magnitude ) = 80 kJ
m ( mass of steam ) = 5 kg
Energy transferred by paddle wheel ( [tex]W_{pp}[/tex] ) = - 18.5 kJ
Energy transferred to piston ( [tex]W_{p}[/tex] ) = ?
Total work done given that there is no change on K.E. and P.E.
Total work done = m ( ∆U ) = Q - W ----- ( 1 )
where W = [tex]W_{pp} + W_{p}[/tex]
Equation ( 1 ) becomes
ΔU = Q - [tex]( W_{PP} + W_{P} )[/tex] ------ ( 2 )
Therefore the energy transferred to piston by work from steam ( [tex]W_{p}[/tex] )
[tex]W_{p}[/tex] = Q - m( ΔU ) - [tex]W_{pp}[/tex]
= 80 - 5(- 50.3 ) - ( -18.5 )
= 350 kJ
Hence the The energy transfer by work from steam to piston is ; [tex]W_{p}[/tex] = 350 kJ
Learn more : https://brainly.com/question/2931410
Light from a helium-neon laser (λ = 633 nm) illuminates two slits spaced 0.50 mm apart. A viewing screen is 2.5 m behind the slits. What is the spacing between two adjacent bright fringes?
Answers
The spacing between two adjacent bright fringes, when a helium-neon laser with a wavelength of 633 nm illuminates two slits 0.50 mm apart and a screen is placed 2.5 m behind the slits, is 3.16 mm.
Explanation:To answer the question on the spacing between two adjacent bright fringes for a helium-neon laser with a wavelength (λ) of 633 nm illuminating two slits spaced 0.50 mm apart, with a viewing screen 2.5 m behind the slits, we use the formula for the fringe spacing in a double-slit interference pattern, Δy = (λL) / d, where Δy is the fringe spacing, λ is the wavelength of the light, L is the distance from the slits to the screen, and d is the distance between the slits.
Given λ = 633 nm = 633 × 10-9 m, L = 2.5 m, and d = 0.50 mm = 0.50 × 10-3 m, plugging these values into the formula gives:
Δy = (633 × 10-9 m × 2.5 m) / (0.50 × 10-3 m) = 3.16 × 10-3 m = 3.16 mm
Therefore, the spacing between two adjacent bright fringes is 3.16 mm.
Suppose you are implementing a relational employee database, where the database is a list of tuples formed by the names, the phone numbers and the salaries of the employees. For example, a sample database may consist of the following list of tuples:
[("John", "x3456", 50.1) ; ("Jane", "x1234", 107.3) ; ("Joan", "unlisted", 12.7)]
Note that I have written parentheses around the tuples to make them more readable, but the precedences of different operators in OCaml make this unnecessary.
Define a function
find_salary : ((string * string * float) list) -> string -> float
that takes as input a list representing the database and the name of an employee and returns his/her corresponding salary. Think also of some graceful way to deal with the situation where the database does not contain an entry for that particular name, explain it, and implement this in your code.
Define a function
find_phno : ((string * string * float) list) -> string -> string
that is like find_salary, except that it returns the phone number instead.
What I have so far:
let rec find_salary li nm =
let rec helper name s =
match li with
| [] -> 0.0
| (n, p, s) :: t -> if (name = n) then s
else
helper t name
Answers
Answer:
Explanation:
val db = ("John", "x3456", 50.1) :: ("Jane", "x1234", 107.3) ::
("Joan", "unlisted", 12.7) :: Nil
type listOfTuples = List[(String, String, Double)]
def find_salary(name: String) = {
def search(t: listOfTuples): Double = t match {
case (name_, _, salary) :: t if name == name_ => salary
case _ :: t => search(t)
case Nil =>
throw new Exception("Invalid Argument in find_salary")
}
search(db)
}
def select(pred: (String, String, Double) => Boolean) = {
def search(found: listOfTuples): listOfTuples = found match {
case (p1, p2, p3) :: t if pred(p1, p2, p3) => (p1, p2, p3) :: search(t)
case (p1, p2, p3) :: t if !pred(p1, p2, p3) => search(t)
case Nil => Nil
case _ => throw new Exception("Invalid Argument in select function")
}
search(db)
}
println("Searching the salary of 'Joan' at db: " + find_salary("Joan"))
println("")
val predicate = (_:String, _:String, salary:Double) => (salary < 100.0)
println("All employees that match with predicate 'salary < 100.0': ")
println("\t" + select(predicate) + "\n")
In creating C++ applications, you have the ability to utilize various formatting functions in the iostream library. What are some of the formatting vulnerabilities that can be encountered in using the iostream library in C++?
Answers
Answer:
i. Utility
ii. Performance
Explanation:
While there may be other vulnerabilities of the iostream library when compared to other C++ libraries, the two most common vulnerabilities are
I. Utility
II. Performance
Utility
The capacity of iostream to extend its structured read and write functions is its biggest features. One can overload the operator "<<" for various functions and types and simply use them.
This can't be done with fprintf but it can be used for classes in namespaces. Also, new streambuf types and even streams can't be created just anytime.
Performance
The effect of, “iostreams is intended to do far more than C-standard file IO.” but that is not always true because with iostreams, though there is an extensible mechanism for writing any type directly to a stream, one can't easily write new streambuf’s that will allow you to (via runtime polymorphism) be able to work with existing code.
Compute the number of kilo- grams of hydrogen that pass per hour through a 6-mm-thick sheet of palladium having an area of 0.25 m^2 at 600°C. Assume a diffusion coefficient of 1.7 x 10^8 m^2/s, that the concentrations at the high- and low-pressure sides of the plate are 2.0 and 0.4 kg of hydrogen per cubic meter of palladium, and that steady-state conditions have been attained.
Answers
Answer:
The number of kilo- grams of hydrogen that pass per hour through this sheet of palladium is [tex]4.1 * 10^{-3} \frac{kg}{h}[/tex]
Explanation:
Given
x1 = 0 mm
x2 = 6 mm = 6 * [tex]10^{-3}[/tex] m
c1 = 2 kg/[tex]m^{3}[/tex]
c2 = 0.4 kg/[tex]m^{3}[/tex]
T = 600 °C
Area = 0.25 [tex]m^{2}[/tex]
D = 1.7 * [tex]10^{8} m^{2}/s[/tex]
First equation
J = - D [tex]\frac{c1 - c2}{x1 - x2}[/tex]
Second equation
J = [tex]\frac{M}{A*t}[/tex]
To find the J (flux) use the First equation
J = - 1.7 * [tex]10^{8} m^{2}/s[/tex] * [tex]\frac{2 kg/m^{3} - 0.4 kg/m^{3}}{0 - 6 * 10^{-3} } = 4.53 * 10^{-6} \frac{kg}{m^{2}s }[/tex]
To find M use the Second equation
[tex]4.53 * 10^{-6} \frac{kg}{m^{2}s}[/tex] = [tex]\frac{M}{0.25 m^{2} * 3600s/h}[/tex]
M = [tex]4.1 * 10^{-3} \frac{kg}{h}[/tex]
Decide how the sketches below would be listed, if they were listed in order of decreasing force between the charges. That is, select "1" beside the sketch with the strongest force between the charges, select "2" beside the sketch with the next strongest force between the charges, and so on.
Answers
Answer:
box 2=highest
box3= 2
box 1=3
box 4=lowest
Explanation:
Decide how the sketches below would be listed, if they were listed in order of decreasing force between the charges. That is, select "1" beside the sketch with the strongest force between the charges, select "2" beside the sketch with the next strongest force between the charges, and so on.
take note that like charges repel while unlike charges attract
from the law of electric attraction, we know that
f=kQq/r^2
force is directly proportional to the charges,
-3-1= has the highest force of repulsion
the first bos, the balls are -2-1=-3 they are repulsive
second box=-3-1=-4
third box=-3-1=-4
fourth=-1-1=-2
box 2=highest
box3= 2
box 1=3
box 4=lowest
An AM radio transmitter radiates 550 kW at a frequency of 740 kHz. How many photons per second does the emitter emit?
Answers
Answer:
1121.7 × 10³⁰ photons per second
Explanation:
Data provided in the question:
Power transmitted by the AM radio,P = 550 kW = 550 × 10³ W
Frequency of AM radio, f = 740 kHz = 740 × 10³ Hz
Now,
P = [tex]\frac{NE}{t}[/tex]
here,
N is the number of photons
t is the time
E = energy = hf
h = plank's constant = 6.626 × 10⁻³⁴ m² kg / s
Thus,
P = [tex]\frac{NE}{t}[/tex] = [tex]\frac{N\times(6.626\times10^{-34}\times740\times10^{3})}{1}[/tex] [t = 1 s for per second]
or
550 × 10³ = [tex]\frac{N\times(6.626\times10^{-34}\times740\times10^{3})}{1}[/tex]
or
550 = N × 4903.24 × 10⁻³⁴
or
N = 0.11217 × 10³⁴ = 1121.7 × 10³⁰ photons per second
The number of photons that are emitted by this AM radio transmitter is equal to [tex]1.12 \times 10^{33}\;photons.[/tex]
Given the following data:
Power = 550 kW.Frequency = 740 kHz.Scientific data:
Planck constant = [tex]6.626 \times 10^{-34}\;J.s[/tex]How to calculate the number of photons.In order to determine the number of photons that are being emitted by this AM radio transmitter, we would solve for the quantity of energy it consumes by using Planck-Einstein's equation.
Mathematically, the Planck-Einstein relation is given by the formula:
[tex]E = hf[/tex]
Where:
h is Planck constant.f is photon frequency.Substituting the given parameters into the formula, we have;
[tex]E = 6.626 \times 10^{-34}\times 740 \times 10^3\\\\E = 4.903 \times 10^{-28}\;Joules.[/tex]
For the number of photons:
[tex]n=\frac{Power}{Energy} \\\\n=\frac{550 \times 10^3}{4.903 \times 10^{-28}} \\\\n=1.12 \times 10^{33}\;photons.[/tex]
Read more on photon frequency here: https://brainly.com/question/9655595
(1.24) Consumer Reports is doing an article comparing refrigerators in their next issue. Some of the characteristics to be included in the report are the brand name and model; whether it has a top, bottom, or side-by-side freezer; the estimated energy consumption per year (kilowatts); whether or not it is Energy Star compliant; the width, depth, and height in inches; and both the freezer and refrigerator net capacity in cubic feet. The "Height" is categorical variable, quantitative variable, or individuals
Answers
Answer:
“height is a quantitative variable ”
Explanation:
According to the question asked, answer is “height is a quantitative variable ”
Height is a quantitative variable because it is related to the measurement and in measurement, when we measure something we deal with number (numerical data)
Numerical data is a type of quantitative data that is why we say “height is a quantitative variable”
There are some other possible questions in the given paragraph which I would like to mention here, are as following:
Which are the categorical variables in the given report?
Answer: Energy star complaints
Top, Bottom or side-by-side freezer
Which are the quantitative variables in the given report?
Answer: Estimated Energy Consumption in kilowatts
Width, depth, and height in inches
Capacity in Cubic Feet
What are the individuals in the report?
Answer: The brand name and model
Using Python, have your program do the following, using loops (no recursion)
1. Have the user repeatedly enter integers until they enter a negative number. At that point stop inputting and proceed to the output described in step two. Note: The negative number that terminates the input is not included in any of these results.
2. When the input is done, display the following if there was at least one valid (non -negative) number entered:
(a) The sum of the numbers entered in that loop
(b) How many numbers were entered
(c) The average of those numbers to two places (avoid integer division.)
(d) The lowest number input
(e) The highest number input
If there were no (valid) numbers entered, make sure your code displays the message "no valid numbers entered" (and avoids dividing by 0) instead of displaying a - e below.
Answers
Answer:
Explanation:
# taking first number
low = int(input("Enter a number: "))
# if that is valid
if low >= 0:
# considering it as high, sum and input
high = low
sum = low
count = 1
inp = low
# breaking if negative number is entered
while True:
# taking user input of numbers
inp = int(input("Enter a number: "))
if inp >= 0:
# adding it to sum
sum = sum + inp
# checking for low
if low > inp:
low = inp
# checking for high
if high < inp:
high = inp
# tracking count
count = count + 1
else:
break
# printing output
print("\nSum =",sum)
print("count =",count)
print("Average =",round(sum/float(count),2))
print("Lowest =",low)
print("Highest =",high)
# no valid numbers
else:
print("no valid numbers entered")
You are designing a three-story office building (Occupancy B) with 20,000 square feet per floor. What types of construction will you be permitted to use under the IBC if you do not install sprinklers?
Answers
Answer:
not provide the sprinklers, then the type of construction will be Type II B under IBC
Explanation:
given data
3 story office building = 20,000 square feet per floor
solution
we know when sprinkler is provide in high rise building to resist fire
and it provide in building as floor area exceed allowable permissible area of building as IBC
so IBC for Type II B allowable area = 19000 square feet per floor
and type III B allowable area = 23000 square feet per floor
so when we design the building by type III B construction, the sprinklers require to provide
but not provide the sprinklers, then the type of construction will be Type II B under IBC
P1.30 shows a gas contained in a vertical piston– cylinder assembly. A vertical shaft whose cross-sectional area is 0.8 cm2 is attached to the top of the piston. Determine the magnitude, F, of the force acting on the shaft, in N, required if the gas pressure is 3 bar. The masses of thepiston and attached shaft are 24.5kg and 0.5kg respectively. The piston diameter is 10cm. The local atmospheric pressure is 1 bar. The piston moves smoothly in the cylinder and g=9.81 m/s2
Answers
In the process of analyzing a thermodynamic system it is important to identify what system is being worked on and the processes and properties if the system
The magnitude of the force acting on the shaft, is approximately 1,336.5 N
The reason the value for the force magnitude acting on the shaft is correct is as follows:
The known parameters are:
The cross-sectional area of the shaft, Aₐ = 0.8 cm²
The required gas pressure in the cylinder, P = 3 bar
The mass of the piston, m₁ = 24.5 kg
The mass of the shaft, m₂ = 0.5 kg
The diameter of the piston, D = 10 cm
The atmospheric pressure, Pₐ = 1 bar
Required:
The magnitude of the force F acting on the shaft
Solution:
The force due to the gas in the cylinder, [tex]\mathbf{F_{gas}}[/tex], is given as follows;
[tex]F_{gas}[/tex] = 3 bar × π × (10 cm)²/4 = 2,359.19449 N
The force due to the atmosphere, [tex]\mathbf{F_{atm}}[/tex], is given as follows;
[tex]F_{atm}[/tex] = 1 bar × ((π × (10 cm)²/4) - 0.8 cm²) ≈ 777.4 N
The force due to the piston and shaft, [tex]\mathbf{F_{ps}}[/tex], is given as follows;
[tex]F_{ps}[/tex] = (24.5 kg + 0.5 kg) × 9.81 m/s² = 245.25 N
The magnitude of the force acting on the shaft, F = [tex]F_{gas}[/tex] - ([tex]\mathbf{F_{atm}}[/tex] + [tex]\mathbf{F_{ps}}[/tex])
∴ F = 2,359.19449 N - (777.4 N + 245.25 N) ≈ 1,336.5449 N
The magnitude of the force acting on the shaft, F ≈ 1,336.5 N
Learn more about forces due to pressure here:
https://brainly.com/question/4197598
An engine has a hot-reservoir temperature of 970 K and a cold-reservoir temperature of 480 K. The engine operates at three-fifths maximum efficiency. What is the efficiency of the engine?
Answers
Answer:
[tex]\eta=0.303[/tex]
Explanation:
Given that
Temperature of the hot reservoir ,T₁ = 970 K
Temperature of the cold reservoir ,T₂ = 480 K
We know that only Carnot engine is the ideal engine which gives us the maximum power.The efficiency of Carnot engine is given as
[tex]\eta_{max}=1-\dfrac{T_2}{T_1}[/tex]
[tex]\eta_{max}=1-\dfrac{480}{970}[/tex]
[tex]\eta_{max}=0.505[/tex]
Therefore the efficiency of the given engine will be
[tex]\eta=\dfrac{3}{5}\eta_{max}[/tex]
[tex]\eta=\dfrac{3}{5}\times 0.505[/tex]
[tex]\eta=0.303[/tex]
The air contained in a room loses heat to the surroundings at a rate of 50 kJ/min while work is supplied to the room by computer, TV, and lights at a rate of 1.2 kW. What is the net amount of energy change of the air in the room during a 30-min period?
Answers
Answer:
net amount of energy change of the air in the room during a 30-min period = 660KJ
Explanation:
The detailed calculation is as shown in the attached file.
Answer:
660KJ
Explanation:
Given
Let Q = Heat Loss from room = 50kj/min
Let W = Work Supplied to room = 1.2KW
1 kilowatt = 1 kilojoules per second
So, W = 1.2KJ/s
In heat and work (Sign Convention)
We know that
1. Heat takes positive sign when it is added to the system
2. Heat takes negative sign when it is removed from the system.
3. Work done is considered positive when work is done by the system
4. Work done is considered negative when work is done on the system.
From the above illustration, heat loss (Q) = -50KJ/Min
In 30 minutes time, Q = -50Kj/Min * 30 Min
Work done in 30 minutes = -1500 KJ
Also, work supplied = -1.2Kj/s
Work supplied to the system in 30 minutes = -1.2Kj/s * 30 minutes
W = -1.2 KJ/s * 30 * 60 seconds
W = -2160KJ
In thermodynamics (First Law)
Q = W + ΔU
-1500 = -2160 + ΔU
∆U = 2160 - 1500
∆U = 660KJ