Final answer:
To find the heat transferred, convert 27.0g CH3OH to moles, use the reaction's stoichiometry to determine heat per mole, and then multiply by the moles of CH3OH. The total heat transferred is 211.7 kJ.
Explanation:
To calculate the amount of heat transferred when 27.0g of CH3OH(g) is decomposed by the given reaction at constant pressure, follow these steps:
Convert the mass of CH3OH to moles using its molar mass (32.04 g/mol for CH3OH).Use the stoichiometry of the reaction to determine how much heat is produced per mole of CH3OH decomposed.Multiply the number of moles of CH3OH by the enthalpy change (ΔH) given for the reaction to find the total heat transferred.Here's how to apply these steps:
Number of moles of CH3OH = 27.0 g / 32.04 g/mol = 0.842 moles.The reaction shows that ΔH for the decomposition of 2 moles of CH3OH is +252.8 kJ.Heat transferred = 0.842 moles * (252.8 kJ / 2 moles) = 211.7 kJ.The heat transferred when 27.0 g of CH3OH(g) is decomposed by this reaction at constant pressure is 211.7 kJ.
2)
____________________ helps explain why there are a large number of marsupial mammal species in Australia and South America, two continents that were once connected.
A) Ozone production
B) Continental drift
C) The fifth mass extinction
Eliminate
D) The first mass extinction
A scientist examining the periodic table sees that the element magnesium (Mg) has the atomic number of 12.
Based on this knowledge, what does the scientist immediately know is true about magnesium atoms?
Magnesium atoms have 12 protons.
Magnesium atoms have 6 protons and 6 electrons.
Magnesium atoms have 12 neutrons.
Magnesium atoms have 6 protons and 6 neutrons.
The answer should be Magnesium atoms have 12 protons. This is because the atomic number of an element indicates how many protons there are. Hope this helps someone down the road!
In writing the complete ionic equation for the reaction (if any) that occurs when aqueous
solutions of KOH and Mg(NO3)2 are mixed, which of the following would not be
written as ionic species?
A) KOH
B) Mg(NO3)2
C) Mg(OH)2
D) KNO3
E) All of the above would be written as ionic species.
How many molecules of carbon dioxide are there in 44.0 grams of the gas? (atomic mass of carbon = 12.0 and atomic mass of oxygen = 16.0)
Avogadro's number is the number of units (atoms, molecules) in 1 mole of substance:
6.023 × 10²³ molecules per 1 moleA gas of unknown identity diffuses at a rate of 83.3 mL/s in a diffusion apparatus in which carbon dioxide diffuses at the rate of 102 mL/s. Calculate the molecular mass of the unknown gas. Give your answers in units of g/mol to three significant figures.
Answer: 65.7 g/mol
Explanation:
To calculate the rate of diffusion of gas, we use Graham's Law.
This law states that the rate of effusion or diffusion of gas is inversely proportional to the square root of the molar mass of the gas. The equation given by this law follows:
[tex]\text{Rate of diffusion}\propto \frac{1}{\sqrt{\text{Molar mass of the gas}}}[/tex]
[tex]\frac{Rate_{X}}{Rate_{CO_2}}=\sqrt{\frac{M_{CO_2}}{M_{X}}}[/tex]
[tex]\frac{83.3}{102}=\sqrt{\frac{44}{M_{X}}[/tex]
Squaring both sides and solving for [tex]M_{X}[/tex]
[tex]M_{X}=65.7g/mol[/tex]
Hence, the molar mas of unknown gas is 65.7 g/mol.
What does ozone do to make life on earth possible?
What is the name of a solution whose concentration of solute is equal to the maximum concentration that is predicted from the solute's solubility?
dilute
saturated
unsaturated
supersaturated
Answer: The correct answer is saturated solution.
Explanation:
For the given options:
Dilute solutions are defined as the solutions in which solute particles are present in less very amount than the solvent particles.
Unsaturated solutions are defined as the solutions where more and more of solute particles can be dissolved in the given amount of solvent.
Saturated solutions are defined as the solutions where no more solute particles can be dissolved in the solvent. The concentration of the solute particles that can be dissolved in a solution is maximum.
Supersaturated solutions are defined as the solutions where more amount of solute particles are present than the solvent particles.
From the above information, we conclude that the given solution is saturated solution.
Answer:
The correct answer is saturated
Explanation:
Hello!
Let's solve this!
Diluted solutions are when you have more solvent than solute.
The saturated solution is when it has the same amount of solute as of solvent.
The unsaturated solution is the solution in which the solvent can still receive more solute.
The supersaturated solution is when it has more solute than the one that can dissolve the solvent.
Then the correct answer is saturated where the solvent already has the maximum amount of solute that can dissolve.
What is a renewable source of energy? a. An energy resource that is used up over time. b. An energy resource that is available and can be recreated. c. An energy resource that is no longer used. d. An energy resource that is now used more than oil and gas.
the equation A+X AX is the general equation for a(n)
What is the difference between a molecule and a compound?
Small polar molecules, such as water and ethanol, pass through the membrane slowly because of a process called
Water and ethanol can pass through the membrane even though it's polar because it's a very small molecule and can under go this process through osmosis.
What is Osmosis ?A process by which molecules of a solvent tend to pass through a semipermeable membrane from a less concentrated solution into a more concentrated one, thus equalizing the concentrations on each side of the membrane.
Water can also pass through the cell membrane by osmosis, because of the high osmotic pressure difference between the inside and the outside the cell.
This is not an easy process, because the solubility of water and Ethanol in lipid is about 1 molecule of water per million molecules of lipid.
But, the outside concentration of water or ethanol becomes very high (about 50 mol/L), and the surface area to volume ratio of the cell is very large, so this is an important cellular process.
Learn more about Osmosis here ;
https://brainly.com/question/1799974
#SPJ2
What is the abreviation for carbon dioxide??
The abbreviation for carbon dioxide is CO₂, which represents its chemical composition of one carbon atom and two oxygen atoms.
Explanation:The abbreviation for carbon dioxide is CO₂. This is derived from the chemical formula for carbon dioxide, which includes one carbon atom (C) and two oxygen atoms (O₂). This formula reflects the compound's composition and is used commonly in chemistry to denote different substances.
Learn more about Carbon Dioxide here:https://brainly.com/question/3049557
#SPJ12
Which of the following characteristics of carbon is responsible for the variety of carbon-based molecules on Earth?
A) It can form bonds.
B) It can form proteins.
C) It has four valence electrons.
D) It is organic in nature.
...?
Does elements in group 2 lend electrons
Yes, Group 2 elements, the alkaline earth metals, lose two electrons to form +2 ions, achieving a noble gas electron configuration, and are typically found as compounds due to their reactivity.
The elements in Group 2 of the periodic table are known as the alkaline earth metals. These elements, which include beryllium, magnesium, calcium, strontium, barium, and radium, have two electrons in their outermost energy level.
In chemical reactions, these Group 2 elements tend to lose two electrons to achieve a noble gas configuration, resulting in a +2 oxidation state. This is because they seek to have a full valence shell, similar to the nearest noble gas in the periodic table.
Group 17 elements (halogens) aim to gain one electron to complete their valence shells, while Group 14 elements have the ability to gain or lose four electrons depending on the context. Group 1 elements, also known as alkali metals, readily lose one electron in chemical reactions.
The chemical reactivity of alkaline earth metals is significant, but not as high as their Group 1 counterparts, due to the higher energy required to remove two electrons. Yet, they are reactive enough that they are not found free in nature, only in compound forms. The reactivity and the +2 oxidation state dominate the chemistry of Group 2 elements.
What is the most appropriate unit of astronomical distance to represent the distance between an earth an orbiting space station and neptune?
Final answer:
The astronomical unit (AU) is the most appropriate unit to represent the distance between an Earth-orbiting space station and Neptune.
Explanation:
The most appropriate unit of astronomical distance to represent the distance between an Earth-orbiting space station and Neptune is the astronomical unit (AU). The AU is defined as the average distance from Earth to the Sun and is approximately 150 million kilometers or 93 million miles. It provides a convenient scale for measuring distances within our solar system, avoiding the use of very large numbers that would be involved if the kilometer were used instead. When discussing the distance between Neptune and an orbiting space station, it's important to remember that Neptune is about 30 AU from the Sun. This puts it at a vastly greater distance from the orbiting space station than the Moon or even other planets within the inner solar system.
What kind of bond holds together atoms within a molecule?
The bond holds together atoms within a molecule is ionic bonds, covalent bonds and metallic bonds.
There are three main types of chemical bonds that hold atoms together within a molecule:
1. Ionic bonds are formed when one atom donates electrons to another atom. The atom that donates electrons becomes a positively charged ion, and the atom that receives electrons becomes a negatively charged ion. The oppositely charged ions are attracted to each other by the electrostatic force.
2. Covalent bonds are formed when two atoms share electrons. The shared electrons are attracted to the nuclei of both atoms, which holds the atoms together. Covalent bonds can be either polar or nonpolar. Polar covalent bonds occur when the atoms share the electrons unequally, while nonpolar covalent bonds occur when the atoms share the electrons equally.
3. Metallic bonds are formed when metal atoms share their valence electrons with each other. The valence electrons form a "sea" of electrons that surrounds the metal atoms. The metal atoms are attracted to the sea of electrons, which holds the atoms together.
The type of bond that holds atoms together in a molecule depends on the elements that make up the molecule and the electronegativity of the atoms. Electronegativity is a measure of how strongly an atom attracts electrons. Atoms with high electronegativity tend to form ionic bonds, while atoms with low electronegativity tend to form covalent bonds.
To know more about atoms here
https://brainly.com/question/13654549
#SPJ6
Which statement correctly describes a chemical reaction?
1)Reactants come out of a reaction.
2)Energy is always released.
3)Bonds between atoms break and new bonds form.
4)Products go into a reaction.
Which macromolecules were present in the milk?
An organism that contains chloroplasts is able to produce food by the process of
How do you determine the frequency of light whose wavelength is 4.257x10^-7?
which solution has a molality of 0.25m NaCl?
Why do elements in the same group have a similar reactivity?
Selenium has six valence electrons. What is the valence of selenium?
Answer:
Two electrons because you need 8 electrons to make a atom stable and selenium has 6 electrons.
Explanation:
The valence of selenium, typically -2, refers to its combining power based on its six valence electrons with the configuration 4s²4p⁴. In compounds, selenium tends to gain two electrons to fill its valence shell.
Explanation:The valence of selenium is the combining power of an element, especially as measured by the number of hydrogen atoms it can displace or combine with.
Selenium has six valence electrons, as indicated by its valence electron configuration: 4s²4p⁴. This means in the fourth energy level (n = 4 shell), selenium has a total of six electrons that can interact with other atoms to form chemical bonds. The valence of selenium can vary depending on the type of compound it forms; however, it is typically -2, as it often seeks to gain two electrons to fill its valence shell and achieve a stable noble gas configuration.
Ammonia is _____.
an acid
a base
a neutral
Ammonia is a base! Have a blessed day!
-Steel jelly
4NH3 + 5O2 4NO +6H2O
In an experiment, 3.25 g of NH3 are allowed to react with 3.50 g of O2. How many grams of NO are formed?
Please round final answers to the tenth position, one place after the decimal
[tex]\boxed{2.6264752{\text{ g}}}[/tex] of NO is formed during the given reaction.
Further explanation:
Limiting reagent is the species or reagent in a chemical reaction according to which the amount of product is decided. It is completely consumed in the reaction.
Stoichiometry governs the amount of species present in the reaction by using the relationship between reactants and products.
The given reaction is as follows:
[tex]{\text{4N}}{{\text{H}}_3} + {\text{5}}{{\text{O}}_2} \to {\text{4NO}} + 6{{\text{H}}_{\text{2}}}{\text{O}}[/tex]
The formula to calculate the moles of the substance is as follows:
[tex]{\text{Moles of substance}} = \dfrac{{{\text{Given mass of substance}}}}{{{\text{Molar mass of substance}}}}[/tex] ...... (1)
Substitute 3.25 g for the given mass and 17.03 g/mol for the molar mass in equation (1) to calculate the moles of [tex]\text{NH}_3[/tex].
[tex]\begin{aligned}{\text{Moles of N}}{{\text{H}}_3} &= \left( {\frac{{{\text{3}}{\text{.25 g}}}}{{17.03{\text{ g/mol}}}}} \right)\\&= 0.1908{\text{ mol}}\\\end{aligned}[/tex]
Substitute 3.50 g for the given mass and 31.98 g/mol for the molar mass in equation (1) to calculate the moles of [tex]\text{O}_2[/tex].
[tex]\begin{aligned}{\text{Moles of }}{{\text{O}}_2} &= \left( {\frac{{{\text{3}}{\text{.50 g}}}}{{{\text{31}}{\text{.98 g/mol}}}}} \right)\\&= 0.1094{\text{ mol}}\\\end{aligned}[/tex]
According to the stoichiometry of this reaction, four moles of reacts with five moles of [tex]\text{O}_2[/tex] to form four moles of NO and six moles of [tex]\text{H}_2\text{O}[/tex].
Calculate the moles of [tex]\text{O}_2[/tex] that react with and 0.1908 moles of [tex]\text{NH}_3[/tex] as follows:
[tex]\begin{aligned}{\text{Amount of }}{{\text{O}}_2} &= \left( {{\text{0}}{\text{.1908 mol N}}{{\text{H}}_3}} \right)\left( {\frac{{{\text{5 mol }}{{\text{O}}_2}}}{{4{\text{ mol N}}{{\text{H}}_3}}}} \right)\\&= 0.2385{\text{ mol }}{{\text{O}}_2}\\\end{aligned}[/tex]
The above calculations concluded that 0.2385 moles of [tex]\text{O}_2[/tex] are needed to react with 0.1908 moles of [tex]\text{NH}_3[/tex] but only 0.1094 moles of [tex]\text{O}_2[/tex] are present in the reaction mixture. Therefore, [tex]\text{O}_2[/tex] is present in limited quantity and is a limiting reagent.
Since [tex]\text{O}_2[/tex] comes out to be the limiting reagent, the formation of NO is governed by it. According to the reaction stoichiometry, five moles of [tex]\text{O}_2[/tex] produces four moles of NO. Therefore the amount of NO can be calculated as follows:
[tex]\begin{aligned}{\text{Amount of NO}} &= \left( {0.1094{\text{ mol }}{{\text{O}}_2}} \right)\left( {\frac{{4{\text{ mol NO}}}}{{5{\text{ mol }}{{\text{O}}_2}}}} \right)\\&= 0.08752{\text{ mol}}\\\end{aligned}[/tex]
Rearrange equation (1) to calculate the mass of the substance.
[tex]{\text{Mass of substance}}= \left( {{\text{Moles of substance}}} \right)\left( {{\text{Molar mass of substance}}} \right)[/tex] ...... (2)
Substitute 0.08752 mol for the moles and 30.01 g/mol for the molar mass in equation (2) to calculate the mass of NO.
[tex]\begin{aligned}{\text{Mass of NO}} &= \left( {0.08752{\text{ mol}}} \right)\left( {30.01{\text{ g/mol}}} \right)\\&= 2.6264752{\text{ g}}\\\end{aligned}[/tex]
Learn more:
Calculate the moles of chlorine in 8 moles of carbon tetrachloride: https://brainly.com/question/3064603 How many grams of potassium was in the fertilizer? https://brainly.com/question/5105904
Answer details:
Grade: Senior School
Chapter: Mole concept
Subject: Chemistry
Keywords: limiting reagent, NH3, NO, H2O, O2, 2.6264752 g, moles, mass, molar mass.
Scientist call an organism that has two different alleles for a trait
Which observation would best support that the bond present was a covalent bond?
Answer:
A covalent bond is present between two non-metals that share electrons in their molecular structure.
Explanation:
Examples of covalent bonds may be between carbon dioxide or water. And there may be three types of covalent bonds such as ionic, covalent and polar. In the first type, there is a transfer of an electron resulting in a gain for one of the atoms. In the second type, there is a sharing of electrons between the atoms. The third type is characterized by a difference in electronegativity between atoms.
Answer: carbon and oxygen share pairs of valence electrons
Explanation: its self explanatory
What are the products of the double-replacement reaction between potassium bromide and silver nitrate? Name the resulting compounds.
Answer: The products formed are potassium nitrate [tex](KNO_3)[/tex] and silver bromide ( AgBr ).
Explanation: Double replacement or double displacement reactions are the reactions in which the positive ions and negative ions of the two reactants interchange to form the products. These reactions are carried out on the basis of their position in reactivity series.
The elements lying above in the reactivity series will be able to displace the elements that lie below in the reactivity series.
For the reaction of potassium bromide and silver nitrate, the reaction follows:
[tex]KBr(aq.)+AgNO_3(aq.)\rightarrow AgBr(s)+KNO_3(aq.)[/tex]
The resulting products are potassium nitrate [tex](KNO_3)[/tex] and silver bromide ( AgBr ).
A material will float on the surface of a liquid if the material has a density less than that of the liquid. Given that the density of water is approximately 1.0 g/mL, will a block of material having a volume of 1.2 x 10^4 in^3 and weighing 350 lb float or sink when placed in a reservoir of water?
How many moles of oxygen atoms in one mole of CO2