The officer conclude that the driver exceeded the speed limit as the speed was 69mph.
speed = distance /time
speed = 30 miles / 26 minute
speed = 30 miles /26 minute x 60 minutes/1 hour
speed = 900 miles/13 hours
speed = 69 mph.
What is your maximum speed limit?the prevailing maximum pace limit for cars on expressways is a hundred and twenty km and on national highways, the maximum velocity restriction is 100 mph.
Velocity limits in India vary by way of nation and car type. In April 2018, the Union Ministry of street shipping and Highways constant the most velocity limit on expressways at a hundred and twenty km/h, for national highways at one hundred km/h, and for urban roads at 70 km/h for the M1 class of vehicles.
Learn more about the speed limit here: https://brainly.com/question/13819357
#SPJ2
What is the acceleration of a 10-N freely falling object with no air resistance?
How long is a pendulum with a period of 1.0 S on the moon which has 1/6 of the earths gravity
Final answer:
To find the length of a pendulum with 1.0 seconds on the Moon, we use the formula for a pendulum's period, adjust the acceleration due to gravity to the Moon's 1.63 m/s², and solve for the pendulum's length.
Explanation:
The subject question inquires about the length of a pendulum on the Moon that has a period of 1.0 seconds, taking into consideration that the Moon's gravity is 1/6th that of Earth's. The formula for the period of a simple pendulum is T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
On Earth, assuming the acceleration due to gravity (g) is approximately 9.81 m/s², the length (L) for a pendulum with a period (T) of 1.0 seconds can be calculated using this formula. However, since we are interested in the situation on the Moon where g is 1/6th that of Earth's, we would have to adjust the acceleration due to gravity in our formula to be 1.63 m/s² (since 9.81 m/s² divided by 6 equals approximately 1.63 m/s²).
Accordingly, by rearranging the formula to L = T²g/(4π²), and substituting T with 1.0 second, and g with 1.63 m/s², one can compute the appropriate length of the pendulum on the Moon that would have a period of 1.0 second.
Final answer:
The length of a pendulum with a period of 1.0 second on the Moon can be calculated by rearranging the period formula for a simple pendulum, T = 2π√(L/g), and substituting in the Moon's gravity of 1.63 m/s².
Explanation:
The length of a pendulum that has a period of 1.0 second on the Moon, where gravity is 1/6th of Earth's gravity, can be found using the formula for the period of a simple pendulum, T = 2π√(L/g). On Earth, where the standard acceleration due to gravity, g, is approximately 9.81 m/s², a 1.0-second period requires a certain pendulum length. However, on the Moon, the acceleration due to gravity is only 1.63 m/s².
We can rearrange this formula to solve for the length (L) of the pendulum on the Moon: L = (T² * g) / (4π²). By substituting T for 1.0 second and g for 1.63 m/s², the length of the pendulum on the Moon can be calculated.
Using the provided formula, we get L = (1.0² seconds² * 1.63 m/s²) / (4π²) which gives us the length of the pendulum on the Moon. You would then perform the calculation to find the exact value for L.
A construction worker with a weight of 850 N stands on a roof that is sloped at 20. What is the magnitude of the normal force of the roof on the worker?
Explanation:
Given that,
Force of gravity acting on the person, F = mg = 850 N
The roof is on the 20 degrees slope with the surface. We need to find the magnitude of normal force of the roof on the worker. It can be calculated as :
[tex]F_N=mg\ cos\theta[/tex]
[tex]F_N=850\times \ cos20[/tex]
[tex]F_N=798.73\ N[/tex]
So, the normal force of the roof on the worker is 798.73 N. Hence, this is the required solution.
The magnitude of the normal force of the roof worker is 798.66 N
The parameters given in the question are
Weight= 850 N
angle= 20°
The formula for calculating the magnitude of the normal force of the roof worker is
= mg cos 20°
= 850 × 0.9396
= 798.66
Hence the magnitude of the normal force of the roof worker is 798.66 N
Please see the link below for more information
https://brainly.com/question/12905094?referrer=searchResults
An elastic band is hung on a hook and a mass is hung on the lower end of the band. When the mass is pulled downward and then released, it vibrates vertically. The equation of motion is
s = 8 cos t + 9 sin t, t ≥ 0,
where s is measured in centimeters and t in seconds. (Take the positive direction to be downward.)
1) How far from its equilibrium position does the mass travel? (Round your answer to two decimal places.)
Final answer:
The mass attached to the elastic band travels approximately 12.04 centimeters from its equilibrium position, as calculated by the amplitude of the given motion equation.
Explanation:
To determine how far from its equilibrium position the mass travels, we must find the amplitude of the motion described by the given equation: s = 8 cos t + 9 sin t. The amplitude can be found by recognizing that the equation represents the sum of two simple harmonic motions, and we use the Pythagorean theorem to find the resultant amplitude.
The general formula for the amplitude, A, when given a cos t + b sin t is A = sqrt(a^2 + b^2). Substituting the given coefficients 8 and 9 into this formula gives us the amplitude A = sqrt(8^2 + 9^2) = sqrt(64 + 81) = sqrt(145), which is approximately A ≈ 12.04 cm.
Thus, the mass travels approximately 12.04 centimeters from its equilibrium position.
As the time required to run up the stairs increases, the power developed by that person
Increases, decreases, or remains the same. Is the answer decreases?
As the time to run up the stairs increases, the power developed decreases..
When analyzing the relationship between time and power, it's essential to consider the fundamental definition of power as the rate at which work is done.
In the context of running up stairs, the work done involves overcoming the gravitational force acting against the person's ascent.As time increases while climbing the stairs, it indicates a slower pace, meaning the person is taking longer to cover the same vertical distance. Since the work done (ascending against gravity) remains constant, the longer time translates to a lower rate of work done, leading to a decrease in power output.This can also be understood using the formula for power -
Power (P) = Work (W) / Time (t)
When the time (t) increases and the work (W) remains constant, the power output (P) decreases.
Thus, as the time required to run up the stairs increases, the power developed by that person decreases.
What does refraction mean?
Refraction is the bending of light rays as they pass through different mediums due to a change in speed, explained by the refractive index and described by Snell's law. It's observable in everyday phenomena and is crucial for the functionality of optical instruments like telescopes.
Refraction refers to the change in direction of a light ray as it passes through variations in matter, such as moving from air into water or glass. This bending occurs due to a change in the light's speed between different mediums. Each material has a refractive index, which dictates how much the light will bend. This index is the ratio of the speed of light in a vacuum to that in the material. For example, when looking into a pond, a stick that is partially submerged in water appears bent at the water's surface; this visual effect is due to refraction.
The extent of refraction follows Snell's law, which relates the angle of incidence to the angle of refraction, keeping in mind the refractive indices of the two media. This law is the foundational principle behind the design of lenses, prisms, and various optical instruments like refracting telescopes.
In astronomy, refraction is observed when light from celestial bodies enters Earth's atmosphere at various angles. Due to the atmosphere's density variations, stars appear slightly higher in the sky than they truly are, as the light they emit is refracted. The amount of this refraction can be calculated, and is negligible near the zenith but increases towards the horizon.
When a current is running through a coil of wire with an iron core, what is created around the wire that is carrying the current?
Answer:
A magnetic field
Explanation:
The temperature of water in a beaker is 45°C. What does this measurement represent?
Answer:
the average kinetic energy of water particles
Explanation:
Match the layers of the atmosphere with the description that best matches it according to the graph titled Temperature Profile.
Troposphere A) Layer closest to the Earth where all weather occurs
Mesosphere B) temperature increases as elevation increases
Mesopause C) temperature remains constant as elevation increases
Stratosphere D) temperature remains at a constant zero degrees celius as elevation increases
Stratopause E) begins between 50-60km and decreases in temperature as elevation increases ...?
Answer: Atmosphere can be broadly divided into four distinct layers based on their altitude and temperature.
These layers are- Troposphere, Stratosphere, Mesosphere, and Thermosphere.
1) Troposphere ( extends upto 18 km from earth surface)- a layer that is closest to the surface of earth. It is called zone of weather as all the weather phenomenon ( such as storm, wind, precipitation, formation of clouds) occur in this layer. Temperature decreases with altitude in this layer.
2) Stratosphere (extends from 18 km to 50 km) - a layer above troposphere, where temperature increases with increase in altitude.
A boundary between stratosphere and mesosphere where temperature remains constant as elevation increases is called Stratopause.
3) Mesosphere (extends 50 km upto 85 km) - a layer above stratosphere, where temperature decreases with increase in altitude.
A boundary between mesosphere and thermosphere, where temperature remains constant as elevation increases is called Mesopause.
4) Thermosphere (extends from 85 km upto 600 km)- a layer above mesosphere, where temperature again increases with increase in altitude. It is an extremely hot layer because of absorption of X rays and UV rays.
Thus, correct match for the question is-
Troposphere -A) Layer closest to the Earth where all weather occurs.
Mesosphere- E) begins between 50-60km and decreases in temperature as elevation increases.
Mesopause- C) temperature remains constant as elevation increases.
Stratosphere -B) temperature increases as elevation increases.
Stratopause -D) temperature remains at a constant zero degrees Celsius as elevation increases.
Final answer:
The layers of the atmosphere can be matched with their descriptions based on the temperature profile as follows: Troposphere - layer closest to the Earth where all weather occurs. Mesosphere - begins between 50-60 km and decreases in temperature as elevation increases. Stratosphere - temperature increases with an increase in elevation. Stratopause - temperature remains constant as elevation increases. Mesopause - temperature remains at a constant zero degrees Celsius as elevation increases.
Explanation:
The layers of the atmosphere can be matched with their descriptions based on the temperature profile as follows:
Troposphere: A) Layer closest to the Earth where all weather occurs. In the troposphere, temperature decreases rapidly with increasing elevation.Mesosphere: E) Begins between 50-60 km and decreases in temperature as elevation increases. The mesosphere is the layer where meteorites usually burn up.Stratosphere: B) Temperature increases with an increase in elevation. Most of the stratosphere is cold and free of clouds, and it contains the ozone layer.Stratopause: C) Temperature remains constant as elevation increases. The stratopause is the isothermal layer that separates the stratosphere from the mesosphere.Mesopause: D) Temperature remains at a constant zero degrees Celsius as elevation increases. The mesopause is the outermost boundary of the mesosphere. Suppose a wave carries 3 units of energy and has an amplitude value of 2. If you double the amplitude to 4, how many units of energy will the wave now carry?
A. 3
B. 6
C. 9
D. 12 ...?
Answer:
The correct answer is option D
Explanation:
Wave Energy is given by
[tex]= \frac{1}{2} M(w^2 *A^2*\frac{1}{2})\\[/tex]
Wave energy is directly proportional to the square of the amplitude.
thus,
[tex]\frac{E1}{E2} = \frac{A1^2}{A2^2} \\\frac{3}{E2} = \frac{2^2}{4^2} \\E2 = 12 units\\[/tex]
I'LL GIVE ONE OF YOU BRAINLIEST ANSWER. PLEASE HELP ME
a) The electric field between two equally but oppositely charged parallel plates is 2.35 N/C [south]. If a charge of –2.00 C was placed at the midway point between the plates, what force (magnitude and direction) would act on the charge?
Give the direction as acting north or south. b) For another set of parallel plates, a charge of –4.00 C experiences a force of 6.00 x 10–3 N [east]. Determine the magnitude and direction of the electric field between these plates. Give the direction as east or west. (continued) 58 G r a d e 1 2 P h y s i c s Assignment 7.4: Electric Field between the Plates of a Parallel Plate Capacitor (continued) d) Label each plate in the diagram below with the appropriate polarity according to the information from part (c) above
Explain how you can tell the difference between the voices of two people if they are saying the same word.
Which of the following is not true about the Law of Conservation of Energy?
A. It states that the total energy in the universe keeps increasing.
B. It applies to everything in the universe.
C. It states that energy is transformed from one form to another.
D. It states that energy is neither created nor destroyed.
By definition, the law of conservation of energy states that:
Ei = Ef
Where,
Ei: initial energy
Ef: final energy
Therefore, no matter the type of energy, always the final energy is equal to the final energy.
Energy can be transformed into another type of energy. For example, the potential energy can be transformed into kinetic energy.
Also, energy is not created, nor destroyed.
Answer:
The following is not true about the Law of Conservation of Energy:
A. It states that the total energy in the universe keeps increasing.
At t = 0, one toy car is set rolling on a straight track with initial position 13.5 cm, initial velocity -4.2 cm/s, and constant acceleration 2.60 cm/s2. At the same moment, another toy car is set rolling on an adjacent track with initial position 8.5 cm, initial velocity 5.20 cm/s, and constant zero acceleration.
(a) At what time, if any, do the two cars have equal speeds?
(b) What are their speeds at that time?
(c) At what time(s), if any, do the cars pass each other? ...?
The two cars have equal speeds at approximately t = 3.85 seconds. The speeds of the cars at that time are approximately 3.15 cm/s and 5.2 cm/s, respectively. The cars pass each other at approximately t = 1.83 seconds.
Explanation:To determine the time when the two cars have equal speeds, we need to find the time when their velocities are equal. The velocity of the first car is given by the equation v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time. Setting the velocities of the two cars equal to each other, we have:
-4.2 + 2.6t = 5.2
Solving for t, we find:
t = (5.2 + 4.2) / 2.6
t ≈ 3.85 seconds
So, at approximately t = 3.85 seconds, the two cars have equal speeds.
(b) To find their speeds at that time, we substitute the value of t into the equation for velocity:
V1 = -4.2 + 2.6(3.85)
V1 ≈ 3.15 cm/s
V2 = 5.2
So, at t = 3.85 seconds, the speeds of the cars are approximately 3.15 cm/s and 5.2 cm/s, respectively.
(c) To find the time(s) when the cars pass each other, we can compare their positions. The position of the first car is given by the equation:
x1 = x1o + u1t + (1/2)at^2
x1 = 13.5 - 4.2t + (1/2)(2.6)t^2
The position of the second car is given by:
x2 = 8.5 + 5.2t
Setting these two equations equal to each other and solving for t, we have:
13.5 - 4.2t + (1/2)(2.6)t^2 = 8.5 + 5.2t
Simplifying, we get:
(1.3)t^2 + 9.4t - 5 = 0
Using the quadratic formula, we find two possible values of t:
t ≈ -2.43 seconds, t ≈ 1.83 seconds
Since time cannot be negative, we discard t = -2.43 seconds. Therefore, the cars pass each other at approximately t = 1.83 seconds.
Will Upvote
Which electrons participate in chemical bonding?
A. the innermost electrons
B. valence electrons
C. any electrons
D. core electrons
B. Valence Electrons
_________________
Reason:
The valence electrons are the number of electrons in an outer shell of an atom that can participate in forming chemical bonds with other atoms. Atoms with a relatively empty outer shell will want to give up electrons.
Identify which sets of Quantum Numbers are valid for an electron. Each set is ordered (n,ℓ,mℓ,ms).
3,2,0,1/2
2,2,-1, 1/2
4,3,-4,1/2
1,0,0,1/2
2,2,1,-1/2
3,2,1,1
0,1,1,-1/2
3,3,1,1/2
2,-2,-2,-1/2
3,2,2,1/2
4,2,1,1/2
2,1,-1,-1/2
How much force is needed to stop a 90-kg soccer player if he decelerates at 15 m/s²? A. 6 N B. 15 N C. 135 N D. 1350 N
The answer is 1350 N
Why magnetic monopole does not exist? ...?
A sign has a mass of 1050 kg, a height h = 1 m, and a width W = 4 m. It is held by a light rod of length 5 m that is perpendicular to a rough wall. A guy wire at 23° to the horizontal holds the sign to the wall. Note that the distance from the left edge of the sign to the wall is 1 m.
Suppose we rely upon friction between the wall and the rod to hold up the sign (there is no hinge attaching the rod to the wall). What is the smallest value of the coefficient of friction µ such that the sign will remain in place? ...?
White bunnies are a common sight on farms and in pet stores. Why are these domestic white rabbits uncommon in the wild?
Answer:
c
Explanation:
what is Snells Law? ...?
Final answer:
Snell's Law is the physical principle that defines the relationship between the angles of incidence and refraction when light transitions between two different media, mathematically expressed as n1 sin θ1 = n2 sin θ2.
Explanation:
Snell's Law, also known as the law of refraction, describes the relationship between the angles of incidence and refraction when a light ray passes through the interface between two different media. This fundamental physical principle is expressed mathematically as n1 sin θ1 = n2 sin θ2, where 'n1' and 'n2' are the indices of refraction of the first and second media, respectively, and 'θ1' and 'θ2' are the angles of incidence and refraction. Snell's Law is crucial for understanding phenomena such as the bending of light, and it has applications in fields like optics and engineering.
A car advertisement claims their car can go from a stopped position to 60 miles per hour in 5 seconds. The advertisement is describing the car's
acceleration.
speed.
velocity.
direction.
The answer is A. Acceleration.
explain why electromagnetic wave is transverse wave and not a compressional wave. ...?
1. A sample consisting of 1.0 mol CaCO3 (s) was heated to 800oC when it is decomposed. The heating was carried out in a container fitted with a piston that was initially resting on the solid. Calculate the work done during complete decomposition at 1.0 atm. What work would be done if instead of having a piston, the container was open to the atmosphere?
The decomposition of CaCO3 in a container with a piston results in the formation of CO2 gas, which increases the volume and hence work done is -2265 Joules. If the reaction was in an open container, the work done would be zero as there is no opposing force and volume change in the container.
Explanation:The decomposition of Calcium carbonate i.e. CaCO3, leads to the formation of calcium oxide and carbon dioxide, as shown by the equation CaCO3(s) → CaO(s)+CO2(g). The process is a type of expansion work, which can be calculated using the formula W=PΔV, where W = work, P = pressure and ΔV = change in volume. Carbon dioxide being gas increases the volume. For 1 mole of CO2 at STP, the volume is approximately 22.4 liters or 22.4*10^-3 m^3. As we know Pressure = 1 atm = 1.01325*10^5 Pascals, work done = - PΔV = -1.01325*10^5 Pascals * 22.4*10^-3 m^3 = -2265 Joules.
Now if instead of a piston, the container was open to the atmosphere, the work done would be different as the work will depend on the volume change. In an open container, the system does work but due to no restriction or expansion against any opposing force, the work done is zero since the pressure outside and inside the container is same (atmospheric pressure) and there is no volume change in the container.
Learn more about Chemical Reaction here:https://brainly.com/question/34137415
#SPJ12
The work done during the complete decomposition of 1.0 mol of CaCO3 at 800°C and 1.0 atm is -88.07 L·atm or -8920.3 J. This work would be the same if the container were open to the atmosphere.
To find the work done during the complete decomposition of 1.0 mol of calcium carbonate (CaCO3), we follow these steps:
Write the decomposition reaction: CaCO₃(s) → CaO (s) + CO₂ (g)Determine the amount of gas formed: From the reaction, 1 mole of CaCO₃ produces 1 mole of CO₂.Calculate work by w = -PΔVUsing the ideal gas law (PV = nRT) at 800°C (which is 1073 K):
R (gas constant) = 0.0821 L·atm·K⁻¹·mol⁻¹T = 1073 KΔV = nRT / P = (1 mol) * (0.0821 L·atm·K⁻¹·mol⁻¹) * (1073 K) / (1 atm) = 88.07 LSince work done is calculated by w = -PΔV:
w = -1 atm * 88.07 L = -88.07 L·atm or -88.07 J (since 1 L·atm = 101.3 J)Conclusion: The work done during the complete decomposition of 1.0 mol of CaCO3 at 800°C and 1.0 atm is -88.07 L·atm or -8920.3 J. This work would be the same if the container were open to the atmosphere because the external pressure remains 1.0 atm.
If a construction worker drops a wrench
from the top of a building 375 feet high the
wrench will be
s(t) = −16t2 + 375
feet above the ground after t seconds.
Determine the velocity of the wrench 4 seonds after it was was dropped.
Answer in units of ft/sec
...?
The velocity of the wrench 4 seconds after being dropped is -128 ft/sec, indicating it is moving downwards.
To determine the velocity of the wrench 4 seconds after it was dropped from the top of the building, we use the height function s(t) = -16[tex]t^2[/tex] + 375, which represents the wrench's position over time.
The velocity at any time t is given by the derivative of the position function, which is v(t) = s'(t).
Calculating the derivative, we get v(t) = -32t. Therefore, the velocity of the wrench at t = 4 seconds is v(4) = -32(4) = -128 ft/sec. The negative sign indicates that the wrench is moving downwards.
What is the direction of the force that acts on clothes in the spin cycle of a washing machine?
a. outward
b. inward
c. up
d. down
The answer is option a.
During a washing machine's spin cycle, the force that acts on the clothes is directed outward, which is a result of the centrifugal force.
Explanation:In the context of a washing machine's spin cycle, the force that acts on the clothes is directed outward. This is due to the principle of centrifugal force, a type of inertial force that acts on an object moving in a circular path. The centrifugal force pushes the clothes against the wall of the washing machine drum when it rotates, effectively helping to draw water out of the clothes.
This centrifugal force pushes the clothes away from the center of rotation, causing them to stick to the drum's inner surface during the spin cycle.
Therefore, the answer is option a.
Learn more about centrifugal force here:https://brainly.com/question/545816
#SPJ3
a football is kicked at an 50 degree angle to the horizontal , travels a horizontal distance of 20m before hitting the ground. what is the initial speed?
Eliminate the parameter t. Find a rectangular equation for the plane curve defined by the parametric equations.
x = 6 cos t, y = 6 sin t; 0 ≤ t ≤ 2π
A. x^2 - y^2 = 6; -6 ≤ x ≤ 6
B. x^2 - y^2 = 36; -6 ≤ x ≤ 6
C. x^2 + y^2 = 36; -6 ≤ x ≤ 6
Final answer:
To eliminate the parameter t and find a rectangular equation for the plane curve defined by the parametric equations x = 6 cos t, y = 6 sin t; 0 ≤ t ≤ 2π, we can square both equations and then add them together. The rectangular equation for the plane curve is x^2 + y^2 = 36.
Explanation:
To eliminate the parameter t and find a rectangular equation for the plane curve defined by the parametric equations x = 6 cos t, y = 6 sin t; 0 ≤ t ≤ 2π, we can square both equations and then add them together. This will eliminate the parameter t and give us a rectangular equation. Let's do the calculations:
x^2 = (6 cos t)^2 = 36 cos^2 t
y^2 = (6 sin t)^2 = 36 sin^2 t
Adding the two equations together: x^2 + y^2 = 36 (cos^2 t + sin^2 t) = 36
So, the rectangular equation for the plane curve is x^2 + y^2 = 36. This means that option C is the correct answer.
Which heavenly bodies are involved in causing the earths tides?
only the moon and earth.
only the earth.
the earth, moon, and sun.
all the planets plus the moon.
PLEASE HELP The rotating light on a lighthouse is 400 feet from a cliff. It completes one rotation every 10 seconds. The equation representing the distance, d, in feet that the center of the circle of light is from the lighthouse is d(t) = 400sec (πt/5). What is the period of d(t)? (Enter only the number.) ...?