Consider a magnetic force acting on an electric charge in a uniform magnetic field. Which of the following statements are true? Check all that apply. The direction of the magnetic force acting on a moving electric charge in a magnetic field is perpendicular to the direction of motion. The direction of the magnetic force acting on a moving charge in a magnetic field is perpendicular to the direction of the magnetic field. A magnetic force is exerted on an electric charge moving through a uniform magnetic field. An electric charge moving parallel to a magnetic field experiences a magnetic force. A magnetic force is exerted on a stationary electric charge in a uniform magnetic field. An electric charge moving perpendicular to a magnetic field experiences a magnetic force.

Answers

Answer 1

Answer:

Pushing magma up through the interior of earth

Explanation:

Answer 2

Final answer:

The direction and interaction of a magnetic force on a moving electric charge in a magnetic field.

Explanation:

The statements that are true regarding a magnetic force acting on an electric charge in a uniform magnetic field are:

The direction of the magnetic force acting on a moving electric charge in a magnetic field is perpendicular to the direction of motion.The direction of the magnetic force acting on a moving charge in a magnetic field is perpendicular to the direction of the magnetic field.An electric charge moving through a uniform magnetic field experiences a magnetic force.An electric charge moving parallel to a magnetic field experiences a magnetic force.

Therefore, statements 1, 2, 3, and 4 are true.


Related Questions

Please help on this one?

Answers

the object distance of both lenses are positive.

Which of the following best summarizes what we mean by dark matter?Matter for which we have theoretical reason to think it exists, but no observational evidence for its existence.Matter that we have identified from its gravitational effects but that we cannot see in any wavelength of light.Matter that may inhabit dark areas of the cosmos where we see nothing at all.Matter consisting of black holes.

Answers

Answer: Matter that we have identified from its gravitational effects but that we cannot see in any wavelength of light

Dark matter is a type of matter, whose composition is unknown and which corresponds to 80% of the matter in the universe. Its name refers to the fact it does not emit or interact with any type of electromagnetic radiation, being completely transparent throughout the electromagnetic spectrum.  

However, it interacts with the known matter through gravity.  

This means that, like gravity, dark matter can not be observed directly, however its existence is inferred through the movement of the stars and the cosmic dust within the galaxies.

Answer:

5- Normal, 68-dark energy, 27 dark matter

Explanation:

What is the correct composition of the universe, based on theoretical and cosmological observations?

   dark energy

   dark matter

   normal matter

   5 percent

   arrowRight

   68 percent

   arrowRight

   27 percent

   arrowRight

Seyed made a chart to compare Einstein's and Newton's ideas about time and space.



Which best completes the chart?

The speed of light is absolute.
The speed of light varies.
Space is three-dimensional.
Space is four-dimensional.

Answers

Answer:

space is three dimensional

Answer: Space is three-dimensional

Explanation: For Newton, space time forms a three-dimensional universe, with the characteristic of an absolute void that determines the order of the things that compose it.

A motor attached to a 120 V/60 Hz power line draws an 8.40 A current. Its average energy dissipation is 850 W. How much series capacitance needs to be added to increase the power factor to 1.0?

Answers

Final answer:

To increase the power factor to 1.0 in a motor circuit, a capacitor should be added. The capacitance value of the capacitor can be calculated by knowing the real and apparent power of the motor circuit before and after the capacitor addition. The introduction of the capacitor provides reactive power that neutralizes the inductiveness of the motor coil, making the circuit purely resistive.

Explanation:

The subject matter pertains to understanding power factor, power dissipation and the effects of adding capacitance in a motor circuit. Now, the question mentions that the motor draws 8.40 A current at 120 V giving us a power apparent = V*I = 120 * 8.40 VA. However, the average power dissipated (Real power, P) is 850 W. The power factor is the ratio of real power to apparent power. However, to achieve a power factor of 1 (i.e., make the circuit purely resistive), we must add a capacitor (reactive power component) that will counteract the inductiveness of the motor coil.

The power factor before the capacitor is added is P/S = 850/(120*8.4) =  0.84. The reactive power Q before the capacitor is added can be calculated by the formula Q = sqrt[(S^2)-(P^2)] = sqrt[((120*8.4)^2)-(850^2)] VAR. After the capacitor is added, the power factor is 1 (as per the question), which means the reactive power Q' = 0. Therefore, reactive power supplied by the capacitor C = Q - Q' = Q = sqrt[((120*8.4)^2)-(850^2)].

Using Q = sqrt[(S^2)-(P^2)], we can find the current supplied by the capacitor as Ic = Q/V. From this current, we can find the capacitance using the formula C = Ic / (2*π*f.*V) where f = frequency = 60 Hz.

Learn more about Power Factor Correction here:

https://brainly.com/question/30770475

#SPJ3

To improve the power factor of a 120 V motor that draws 8.40 A to unity, we need to add a 94.6 µF series capacitance. This helps cancel out the reactive power, thereby achieving a power factor of 1.0.

Calculating Series Capacitance to Improve Power Factor

To increase the power factor to 1.0 for a motor attached to a 120 V/60 Hz power line that draws an 8.40 A current and has an average energy dissipation of 850 W, follow these steps:

Step 1: Calculate Apparent Power (S)

we know , Apparent power S = V * I

Where:

V = 120 V

I = 8.40 A

So,

S = 120 V * 8.40 A = 1008 VA

Step 2: Calculate the Current Power Factor (pf)

The power factor is the ratio of real power (P) to apparent power (S). Therefore:

pf = P / S = 850 W / 1008 VA ≈ 0.843

Step 3: Calculate the Reactive Power (Q)

Reactive power can be determined using the Pythagorean theorem for the power triangle:

Q = √(S² - P²)

So,

Q = √(1008² - 850²) ≈ 512 VAR

Step 4: Calculate Required Capacitive Reactance (Xc)

For unity power factor, the reactive power provided by the capacitor should cancel out the Q value:

Xc = V² / Q

So,

Xc = 120² / 512 ≈ 28.125 ohms

Step 5: Calculate Series Capacitance (C)

Use the formula for capacitive reactance:

Xc = 1 / (2πfC)

Solve for C:

C = 1 / (2π * 60 Hz * 28.125 ohms) ≈ 94.6 µF

Adding a series capacitance of approximately 94.6 µF will increase the power factor to 1.0.

When a guitar is tuned to adjust it pitch what is it that is changed?

A) its wavelength
B) Its frequency
C) Its amplitude
D) its linear density

Answers

Answer:

B) Its frequency

Explanation:

The pitch of sound heard depends on its frequency of the sound wave. Frequency refers to how fast the sound wave is oscillating. A high frequency sound wave has a high pitch while a low frequency sound wave has a low pitch.The faster the sound wave oscillates the higher the pitch. For instance, a guitar with a big heavy string will vibrate slowly and thus create a low pitch.

When a guitar is tuned to adjust its pitch, B) its frequency is changed.

The frequency determines how high or low we perceive the sound (or pitch) to be. This adjustment is achieved by tightening or loosening the tension on the strings, which alters the rate at which the string vibrates.

Frequency is the number of vibrations per second of the string and is measured in Hertz (Hz). Higher tension on the string increases the vibration rate, leading to a higher pitch, while lower tension decreases the vibration rate, resulting in a lower pitch.

So, the frequency is key in changing the pitch of the guitar string, not the wavelength, amplitude, or linear density. The correct answer is B.

Which of the following statements are true regarding the electromagnetic spectrum?1. X rays and gamma rays have very long wavelengths and very low photon energies.2. Radio waves have wavelengths on the order of meters and very low photon energies.3. Ultraviolet radiation has long wavelengths and low photon energies.4. Visible light lies at the center of the electromagnetic spectrum.5. Infrared radiation has long wavelengths and low photon energies.

Answers

Answer:

2, 4, 5

Explanation:

The electromagnetic spectrum gives the classification of the electromagnetic waves according to their wavelength/frequency. In order from the shortest to the greatest wavelength, we have:

Gamma rays

X-rays

Ultraviolet

Visible light

Infrared

Microwaves

Radio waves

Moreover, the frequency of an electromagnetic wave is inversely proportional to its wavelength, according to:

[tex]f=\frac{c}{\lambda}[/tex]

where c is the speed of light.

Finally, the energy of a photon of an electromagnetic wave is directly proportional to the frequency, and inversely proportional to the wavelength:

[tex]E=hf = \frac{hc}{\lambda}[/tex]

where h is the Planck constant.

Keeping in mind these facts, let's now analyze each statement:

1. X rays and gamma rays have very long wavelengths and very low photon energies. --> FALSE: X-rays and gamma rays have the shortest wavelength, so they have the highest frequency and very high energy.

2. Radio waves have wavelengths on the order of meters and very low photon energies. --> TRUE. Radio wave wavelengths are on the order of meters, so very long; consequently, their frequency is very low, and so their energy is also very low.

3. Ultraviolet radiation has long wavelengths and low photon energies. --> FALSE. Ultraviolet has short wavelength, so high frequency and high photon energy.

4. Visible light lies at the center of the electromagnetic spectrum. --> TRUE: visible light photons have wavelength between 380 and 750 nm, and lie at the center of the electromagnetic spectrum.

5. Infrared radiation has long wavelengths and low photon energies. --> TRUE: infrared radiation has longer wavelengths (if compared to the visible light), and therefore lower frequency and lower energy.

Final answer:

X-rays and gamma rays have high photon energies and short wavelengths, radio waves have long wavelengths and low photon energies, visible light lies in the middle of the electromagnetic spectrum.

Explanation:

Among the statements, the correct ones regarding the electromagnetic spectrum are:

X rays and gamma rays have very high photon energies and very short wavelengths. This is because they have high frequencies and carry a lot of energy.Radio waves have long wavelengths on the order of meters and low photon energies. They have low frequencies and carry less energy compared to other types of radiation in the electromagnetic spectrum.Visible light lies at the middle of the electromagnetic spectrum. It has wavelengths that are longer than X-rays but shorter than infrared and ultraviolet radiation.

Based on the information about the characteristics and properties of electromagnetic radiation, these statements accurately reflect the nature of X-rays, gamma rays, radio waves, and visible light.

Learn more about Electromagnetic spectrum here:

https://brainly.com/question/23727978

#SPJ3

A spring required a force of 5.0 n to compress it 0.1 m. how much work is required to stretch the spring 0.4 m

Answers

Answer:

20N

Explanation:

The force (Hooke's Law) is proportional to the deformation. To extend the spring 4 times longer, you will need 4 times the force. In total, 20 N

The amount of work required to stretch the spring 0.4 m give the data is 4 J

How to determine the spring constant

From the question given above, the following data were obtained

Force (F) = 5 NCompression (e) = 0.1 mSpring constant (K) =?

K = F/ e

K = 5 / 0.1

K = 50 N/m

How to determine the work Spring constant (K) = 50 N/mExtention (e) = 0.4 mWork =?

W = ½Ke²

W = ½ × 50 × 0.4²

W = 25 × 0.16

W = 4 J

Learn more about spring constant:

https://brainly.com/question/9199238

#SPJ2

Using kinetic theory explain why a tire is more likely to blow out during a trip in the summer than during one in the winter

Answers

the hotness of the ground would mostly likely make the tire blow out

Which type of tissue allows for cordination and control movement ?

Answers

The Nerve Tissue allows for coordination and control movement

Nervous tissue is used for coordination and control movement.

Explanation:

The group of organized cells that is in the nervous system, which is responsible in controlling the movements of the human body, sending and carrying signals to and from different body parts is called Nervous tissue.  It is also responsible in controlling functions in the body like digestion.

This tissue is classified into categories such as neurons and neroglia. The electric impulses are transmitted by neurons and supporting and protecting neurons is done by neuroglia. The whole nervous system is comprised of neurons.

During a solar eclipse, the Moon, Earth, and Sun all lie on the same line, with the Moon between the Earth and the Sun. Answer all questions to 3 significant figures. (a) What force is exerted by the Sun on the Moon? WebAssign will check your answer for the correct number of significant figures. Incorrect: Your answer is incorrect. Enter a number. (b) What force is exerted by the Earth on the Moon? WebAssign will check your answer for the correct number of significant figures. (c) What force is exerted by the Sun on the Earth? WebAssign will check your answer for the correct number of significant figures.

Answers

(a) [tex]4.40\cdot 10^{20}N[/tex]

The distance between the Sun and the Earth is

[tex]d_{SE}=1.496 \cdot 10^11 m[/tex]

The distance between the Earth and the Moon is

[tex]d_{EM} = 3.84\cdot 10^8 m[/tex]

So, the distance between the Sun and the Moon, when the Moon is between the Earth and the Sun, is

[tex]d_SM = 1.496\cdot 10^{11}m -3.84\cdot 10^8 m=1.492\cdot 10^{11} m[/tex]

So the gravitational force between the Sun and the Moon is

[tex]F_{SM} = G \frac{M_S M_M}{d_{SM}^2}[/tex]

where

G is the gravitational constant

[tex]M_S = 1.988 \cdot 10^{30}kg[/tex] is the mass of the Sun

[tex]M_M = 7.384\cdot 10^{22}kg[/tex] is the mass of the Moon

[tex]d_{SM}=1.492\cdot 10^{11} m[/tex] is their distance

Substituting,

[tex]F_{SM} = (6.67\cdot 10^{-11}) \frac{(1.988\cdot 10^{30} kg)(7.384\cdot 10^{22}kg)}{(1.492\cdot 10^{11} m)^2}=4.40\cdot 10^{20}N[/tex]

(b) [tex]2.00\cdot 10^{20}N[/tex]

The gravitational force between the Earth and the Moon is

[tex]F_{EM} = G \frac{M_E M_M}{d_{EM}^2}[/tex]

where

G is the gravitational constant

[tex]M_E = 5.972 \cdot 10^{24}kg[/tex] is the mass of the Earth

[tex]M_M = 7.384\cdot 10^{22}kg[/tex] is the mass of the Moon

[tex]d_{EM}=3.84\cdot 10^{8} m[/tex] is their distance

Substituting,

[tex]F_{EM} = (6.67\cdot 10^{-11}) \frac{(5.972\cdot 10^{24} kg)(7.384\cdot 10^{22}kg)}{(3.84 \cdot 10^{8} m)^2}=2.00\cdot 10^{20}N[/tex]

(c) [tex]3.54\cdot 10^{22}N[/tex]

The gravitational force between the Earth and the Sun is

[tex]F_{ES} = G \frac{M_E M_S}{d_{ES}^2}[/tex]

where

G is the gravitational constant

[tex]M_E = 5.972 \cdot 10^{24}kg[/tex] is the mass of the Earth

[tex]M_S = 1.988 \cdot 10^{30}kg[/tex] is the mass of the Sun

[tex]d_{SE}=1.496 \cdot 10^{11} m[/tex] is their distance

Substituting,

[tex]F_{ES} = (6.67\cdot 10^{-11}) \frac{(5.972\cdot 10^{24} kg)(1.988\cdot 10^{30}kg)}{(1.496 \cdot 10^{11} m)^2}=3.54\cdot 10^{22}N[/tex]

Final answer:

To derive the force exerted by the Sun on the Moon the Earth on the Moon and the Sun on the Earth during a solar eclipse, you apply Newton's law of universal gravitation taking into account the respective masses of the Sun, Earth, and Moon as well as their distances from each other.

Explanation:

Determining the force exerted between celestial bodies during a solar eclipse involves understanding the gravitational relationship between them; primarily the gravitational forces between the Earth, Moon, and the Sun, and the principles of celestial mechanics.

Firstly, we know that the force of gravity follows Newton's law of universal gravitation: F = G (m1m2/r^2),where F is the force of gravity, m1 and m2 are the masses of the two bodies involved, r is the distance between the centers of the two bodies, and G is the gravitational constant.

For any of the specific forces asked in the question (i.e., the force exerted by the Sun on the Moon force exerted by the Earth on the Moon, and the force exerted by the Sun on the Earth), we would need specific values for the masses of the Sun, Earth, and Moon as well as their respective distances. Once those values are known, you can substitute into the above equation to obtain the force.

Learn more about Gravitational Forces here:

https://brainly.com/question/32609171

#SPJ3

Dude what's the difference between a parallel circuit and a series circuit? Cuz idk ????

Answers

Answer:

-Parallel circuits have multiple branching pathways for electrical current.

-series circuit forms a single path.

A girl and a boy are riding on a merry go round that is turning at a constant rate. The girl is near the outer edge, and the boy is closer to the center. Who has greater tangential acceleration?Both the girl and boy have the same nonzero tangential accelerationThe boy has greater tangential accelerationBoth the girl and the boy have zero tangential accelerationThe girl has greater tangential acceleration

Answers

Answer:

The girl has greater tangential acceleration

Explanation:

The angular acceleration ([tex]\alpha[/tex]) of the merry go round is equal to the rate of the change of the angular velocity, [tex]\omega[/tex]:

[tex]\alpha = \frac{d\omega}{dt}[/tex]

Since all the points of the merry go round complete 1 circle in the same time, the angular velocity of each point of the merry go round is the same, and so all the points also have the same angular acceleration.

The tangential acceleration instead is given by

[tex]a_t = \alpha r[/tex]

where

[tex]\alpha[/tex] is the angular acceleration

r is the distance from the centre of the merry go round

Since the girl is near the outer edge and the boy is closer to the centre, the value of r for the girl is larger than for the boy, so the girl has greater tangential acceleration.

Which is an example of the conversion of gravitational potential energy into kinetic energy? a sliding hockey puck an idling car a swimming fish a falling raindrop

Answers

A falling raindrop.

The reason why it's because mass of a raindrop is under influence of gravity pushing it down towards earth surface. When it hit the surface kinetic energy is released.

Answer:

a falling raindrop

Explanation:

Kinetic energy depends on the mass and the velocity of an object.

Potential energy depends on the mass of an object an how high it is.

A raindrop initially has potenial energy because of its high above the ground, when is falling it has a velocity, and having a velocity means it now has kinetic energy.

By falling, the raindrop exchange potential energy for kinetic energy, as it falls, its potential energy is lower since it is at a lower altitud.

And also when it falls it accelerates towards the ground wich makes it have grater velocity and by analogy greater kinetic energy.

Why is the answer B for this problem?

Answers

Answer:

B

Explanation:

This looks like a momentum question. It also looks like there is no horizontal acceleration.

Momentum before           Momentum after

m1vo                                   (m1 + m2)*vo/3           multiply through by 3

3 m1*vo                               m1* vo + m2*vo          subtract m1*vo from both sides

3m1*vo - m1*vo                   m2*vo

2m1*vo                                 m2*vo                      Divide by vo

2m1 =                                    m2

Conclusion: It takes 2 m1's to equal 1 m2.

B is the answer.

The diagram below illustrates the law of reflection.

Which is the angle of reflection?

A

B

C

D

Answers

C Is the angle of reflection. The reflected ray is consistently in the plane determined by the incident ray and perpendicular to the surface at the point of reference of the incident ray.

What is the law of reflection?

The law of reflection specifies that upon reflection from a downy surface, the slope of the reflected ray is similar to the slope of the incident ray.

When the light rays descend on the smooth surface, the angle of reflection is similar to the angle of incidence, also the incident ray, the reflected ray, and the normal to the surface all lie in a similar plane.

Hence,C Is the angle of reflection.

To learn more about the law of reflection, refer to the link;

brainly.com/question/12029226

#SPJ2

Two identical metal bars are heated up until they are both glowing. One of them is "red hot" and the other is "blue hot." Which one is hotter, the one that glows red or the one that glows blue?A) the red oneB) the blue oneC) We cannot tell without knowing more about the two bars.

Answers

Answer:

B) the blue one

Explanation:

We can assimilate each metal bar to a black body. The peak wavelength of the radiation emitted by a blackbody is given by Wien's displacement law:

[tex]\lambda = \frac{b}{T}[/tex] (1)

where

b is the Wien's displacement constant

T is the absolute temperature of the object

In this case, we have one object hotter and the other one colder. We see from (1) that the peak wavelength is inversely proportional to the temperature: therefore, the hotter object will have shorter peak wavelength, while the colder object will have longer peak wavelength.

Since red light has longer wavelength than blue light, we can conclude that the object that glows blue is hotter than the one that glows red.

What do we mean by the event horizon of a black hole?
A) It is the place where X rays are emitted from black holes.B) It is the very center of the black hole.C) It is the point beyond which neither light nor anything else can escape.D) It is the distance from the black hole at which stable orbits are possible.

Answers

The correct answer is: C. It is the point beyond which neither light nor anything else can escape.

Final answer:

The event horizon of a black hole is the boundary where the escape velocity is equal to the speed of light, making it impossible for anything, including light, to escape. It's defined by the Schwarzschild radius and increases in size with additional mass. The center is thought to contain a singularity, which is infinitely dense and small.

Explanation:

The event horizon of a black hole is the boundary beyond which nothing, including light, can escape its gravitational pull. It corresponds to the distance at which the escape velocity equals the speed of light. This boundary is known as the Schwarzschild radius, which is directly proportional to the mass of the black hole. The event horizon is not visible because it does not emit any light; however, it can be inferred by observing the effects of its powerful gravity on nearby matter and radiation.

The size of the Schwarzschild radius (and therefore the event horizon) depends only on the mass of the black hole. If our Sun were to collapse into a black hole, which is purely a theoretical scenario since it lacks sufficient mass, its Schwarzschild radius would be approximately 3 kilometers. Any additional mass added to the black hole would increase the size of its event horizon proportionally.

Inside the event horizon, the center of the black hole is thought to contain a singularity, a point of infinite density and zero volume, which is not directly observable. As matter crosses the event horizon, it seems to freeze in position to an outside observer due to the extreme gravitational effects on lt's travel, but would, in reality, continue to fall inward toward the singularity.

Learn more about Event Horizon of a Black Hole here:

https://brainly.com/question/33505403

#SPJ2

what is the voltage drop across the 20.0 resistor?

Answers

120.0v drop across the 20.0 resistor

Answer:

120.0v drop across the 20.0 resistor

Explanation:

Biological systems use free energy based on empirical data that all organisms require a constant energy input. The first law of thermodynamics states that energy can be neither created nor destroyed. For living organisms, which of the following statements is an important consequence of this first law?

A) The entropy of an organism decreases with time as the organism grows in complexity.
B) The organism must ultimately obtain all necessary energy for life from its environment.
C) The energy content of an organism is constant except for when its cells are dividing.
D) Organisms are unable to transform energy from the different states in which it can exist.

Answers

Answer:

B

Explanation:

Final answer:

The first law of thermodynamics states that energy can neither be created nor destroyed, only transformed. Thus, organisms must obtain all necessary energy for life from their environment. This is because they cannot create their own energy from scratch because of this law.

Explanation:

The first law of thermodynamics states that energy cannot be created or destroyed, but only transformed. In biological systems, energy is constantly being transformed within organisms, as well as being exchanged with the environment. This principle is crucial for organisms to maintain their life processes like growth, reproduction, and movement.

In the context of the choices, statement B is the most relevant. The organism must ultimately obtain all necessary energy for life from its environment. Organisms get energy from the environment in the form of nutrients or sunlight because energy cannot be created from nothing due to the first law of thermodynamics. Whether an organism is a plant using sunlight in photosynthesis, or an animal eating food and using cellular respiration to extract energy, they are harnessing the energy originally sourced from their environment.

Learn more about First law of thermodynamics here:

https://brainly.com/question/9614649

#SPJ6

How do you do this question?

Answers

Answer:

Explanation:

All the bulbs with have the same resistance.

Let the resistance of the Bulbs all = R

Bulb 1 will get all of the current running through it. There will be a voltage drop of Ed1 = I * R and the voltage left over will be seen by some combination of bulbs 2,3 and 4.

The current will be divided between 2R and R. 2R will get the smaller amount of current, and R will get the larger amount. There will be 3 parts in total.

So 2 and 3 will experience 1/3 I,   while the  other bulb will get 2/3 I.

The initial voltage is E

The voltage drop seen by bulbs 2,3 and 4 is E - I*R

Bulb 4 will see the entire voltage of E - I*R

Since it sees 2/3 * I The power dissipated by 4 is P4 = (E - I*R) * (2/3)I

Each of the other bulbs see (E - IR) * (1/3 I)/2 as their power dissipation.

So here's the answer.

P1>P4 > (P2 - P3)

P2 = P3 if there is such an answer in C.

Tim adds salt as he starts to heat a pot of water to cook pasta. When the water is boiling, he notices the salt has dissolved

Answers

Answer:

The salt is dissolved by the water and heat. If the pot isn't boiling, the salt wouldn't dissolve, it would stay undissolved.

When humans look at the sky, it appears blue, but the Sun appears yellow. What causes this phenomenon?

Answers

Light behaves like a wave, and the different colors we perceive are the result of light hitting our eyes at different wavelengths. The air molecules in our atmosphere scatter this visible light, with a "preference" towards light of shorter wavelengths -- blue and violet light. Light of longer wavelengths (green, yellow, orange, red), doesn't pass through to us as visibly until later in the day, when the sun's light has more atmosphere to pass through before it reaches our eyes. The blue light becomes so scattered by the air molecules in its way at this point that we're finally able to see those yellows and reds coming through on our end.

Gamma rays x rays visible light and radio waves are all types of

Answers

Answer:

Electromagnetic waves

Explanation:

Electromagnetic waves are waves that consist of oscillating electric and magnetic fields, that oscillate perpendicularly to each other and perpendicularly to the direction of propagation of the wave (for such a reason, these waves are also called transverse waves).

Electromagnetic waves always travel in a vacuum at the same speed, called speed of light:

[tex]c=3.0\cdot 10^8 m/s[/tex]

and they are classified into 7 different types, according to their frequency. From lowest to highest frequency, we have:

Radio waves

Microwaves

Infrared

Visible light

Ultraviolet

X-rays

Gamma rays

Therefore, gamma rays, x-rays, visible light and radio waves are all types of electromagnetic waves with different frequencies.

A 800 J
B -800 J
C 400 J
D -400 J
??

Answers

I think it will be 800j because right absorb mean getting more

The change in internal energy of the system is 400 joules. The correct answer is: C. 400 J

To determine the change in internal energy of a system that does 200 joules of work and absorbs 600 joules of heat, we can use the first law of thermodynamics. The first law of thermodynamics states:

[tex]\[ \Delta U = Q - W \][/tex]

[tex]\(\Delta U\)[/tex] is the change in internal energy,

Q is the heat added to the system,

W is the work done by the system.

In this problem:

Q = 600 joules (heat absorbed by the system),

W = 200 joules (work done by the system).

Substituting the given values into the equation:

[tex]\[ \Delta U = 600\, \text{J} - 200\, \text{J} \][/tex]

[tex]\[ \Delta U = 400\, \text{J} \][/tex]

You observe two stars in the sky and measure their angular distance as 60 degrees. How many arc seconds is this angular distance?

Answers

(60 degrees) x (60 arcminutes/degree) x (60 arcseconds/arcminute) =

(60 degrees) x (3600 arcseconds/degree) =

216,000 arc seconds

(60 degrees) x (60 arcminutes/degree) x (60 arcseconds/arcminute) = (60 degrees) x (3600 arcseconds/degree) = 216,000 arc seconds.

What is Angular distance?

The angular distance is a measurement of how far apart two points appear to be from the viewpoint of the observer. From each point to the observer, straight lines extended and intersected.

The angular distance, which is commonly stated in degrees or radians, is the angle at which these two lines intersect. This angle can be used in trigonometry to determine heights and distances.

Astronomers frequently refer to the angle instead of the actual distance between celestial bodies when describing the apparent gap between them.

Therefore, (60 degrees) x (60 arcminutes/degree) x (60 arcseconds/arcminute) = (60 degrees) x (3600 arcseconds/degree) = 216,000 arc seconds.

To learn more about Angular distance, refer to the link:

https://brainly.com/question/29732217

#SPJ2

Two particles are 15 meters apart. Particle A has a charge of 6.0 • 10-4 C, and particle B has a charge of 5.0 • 10-4 C. The resulting Coulomb force is 12 N. At the same distance, what combination of charges would yield the same Coulomb force?

Answers

We can choose different pairs of values. Here are some examples:

[tex]q'_1 = 3.0 \times 10^{-4}[/tex] C and [tex]q'_2 = 1.0 \times 10^{-3}[/tex] C,

[tex]q'_1 = 1.0 \times 10^{-4}[/tex] C and [tex]q'_2 = 3.0 \times 10^{-3}[/tex] C,

[tex]q'_1 = 1.5 \times 10^{-4}[/tex] C and [tex]q'_2 = 2.0 \times 10^{-3}[/tex] C.

To solve this problem, we'll use Coulomb's Law, given by the formula:

[tex]F = k_e \cdot \frac{q_1 \cdot q_2}{r^2}[/tex]

where:

[tex]F[/tex] is the Coulomb force,[tex]k_e[/tex] is Coulomb's constant (
8.99 × 10^9 N m²/C²),[tex]q_1[/tex] and [tex]q_2[/tex] are the charges on the particles,[tex]r[/tex] is the distance between the charges.

Given:

Coulomb force, [tex]F = 12[/tex] N,[tex]r = 15[/tex] m,[tex]q_1 = 6.0 \times 10^{-4}[/tex] C,[tex]q_2 = 5.0 \times 10^{-4}[/tex] C.

First, we verify the given force with the given charges and distance:

[tex]F = (8.99 \times 10^9) \cdot \frac{(6.0 \times 10^{-4})(5.0 \times 10^{-4})}{(15)^2}[/tex].

Let's simplify this:

[tex]F = (8.99 \times 10^9) \cdot \frac{3.0 \times 10^{-7}}{225}[/tex].

[tex]F = (8.99 \times 10^9) \cdot 1.333 \times 10^{-9}[/tex].

[tex]F = 12[/tex] N (matches the given force).

To find a new combination of charges that yield the same force, we can use different charges, but they must still give the same numerator in the force equation.

Let new charges be [tex]q'_1[/tex] and [tex]q'_2[/tex]. The condition we'll use is:

[tex]q'_1 \cdot q'_2 = 3.0 \times 10^{-7}[/tex] C².

What is the element with the lowest electronegativity value?

Answers

Answer: Francium

Let's start by explaining that electronegativity is a term coined by Linus Pauling and is determined by the ability of an atom of a certain element to attract electrons when chemically combined with another atom.

So, the more electronegative an element is, the more electrons it will attract.

It should be noted that this value can not be measured directly by experiments, but it can be determined indirectly by means of calculations from other atomic or molecular properties of the element. That is why the scale created by Pauling is an arbitrary scale, where the maximum value of electronegativity is 4, assigned to Fluorine (F) and the lowest is 0.7, assigned to Francium (Fr).

Final answer:

Francium is the element with the lowest electronegativity value, which is determined by factors such as atomic number, distance from the nucleus to the valence electrons, and effective nuclear charge. Fluorine, on the other hand, has the highest electronegativity value. While electron-electron repulsion and electron affinity can influence electronegativity, they are different atomic properties.

Explanation:

The element with the lowest electronegativity value is francium. Electronegativity, which describes how tightly an atom attracts electrons in a bond, is a dimensionless quantity that is calculated rather than measured. It depends on several factors, including the atomic number and the distance from the nucleus to the valence electrons.

Francium has the lowest electronegativity value mostly due to its large size and its single valence electron which is located very far from the nucleus. Hence, the electron is not strongly attracted to the nucleus, resulting in a low electronegativity. Comparably, Fluorine is given the highest electronegativity value of 4 on the Pauling scale, due to its small size and high effective nuclear charge.

Various other factors such as electron-electron repulsion, electron affinity, and formal charge can also influence electronegativity. Please remember that these factors should not be confused with electronegativity itself as they correspond to different atomic properties.

Learn more about Electronegativity here:

https://brainly.com/question/35593282

#SPJ12

How many potassium ions pass through if the ion channel opens for 1.0 ms?

Answers

answer:

1.8E-15C/1.6E-19=11,250

Explanation:

The biochemistry that takes place inside cells depends on various elements, such as sodium, potassium, and calcium, that are dissolved in water as ions. These ions enter cells through narrow pores in the cell membrane known as ion channels. Each ion channel, which is formed from a specialized protein molecule, is selective for one type of ion. Measurements with microelectrodes have shown that a 0.30-nm-diameter potassium ion ({\rm{{\rm K}}}^{\rm{ + }} ) channel carries a current of 1.8 {\rm pA}.

The number of potassium ions that will pass through the ion channel is 11250.

What are potassium ions?

Potassium ions, possibly the most often constituted electrolyte.

Calculating the number of potassium ions that passes through the ion channel

Given that the channel opens for 1.0 ms

Step1: determine the value of charge ( Q )

[tex]Q = I \times \Delta t = ( 1.8 \times 10^-^1^0 A )\times (1.0 \times 10^1^3 s ) = 1.8 \times 10^-^1^5 C[/tex]

where ; I = 1.8 × 10⁻¹² A

[tex]\Delta t = 1.0 \times 10^-^3 s[/tex]

   

Step2: determine number of K⁺ ions passing through

[tex]NK^+ = Q \times e = ( 1.8 \times 10^-^1^5 C )\times ( 1.60 \times 10^-^1^9 C) = 11250[/tex]

Thus, the potassium ions pass through the channel is 11250.

Learn more about potassium ions

https://brainly.com/question/24336764

#SPJ2

A night lamp uses a 30 W bulb. If it is left on continuously for 8 hours, how much energy will it use?


_____ kWh


The answer was 0.24!

Answers

Answer:

Explanation:

[tex] 30W * 8 h = 240 Wh = 0.240 kWh[/tex]

Answer:

0.24 kWh

Explanation:

Which planet is named after the roman god of the sea

Answers

The answer is: Neptune

Answer:

Explanation:

the answer is Neptune

Other Questions
A preschool playground has both bicycles and tricycles. There is a total of 30 seats and 70 wheels. how many bicycles are there? how many tricycles are there? Youre an athlete who chokes during a competitive event. which stage of the stress process is this? stage 1 stage 2 stage 3 stage 4 stage 5 What's wrong with this sentence.....??? When we seeks to discover the best in others', we somehow bring out the best in ourselves. Which of the following BEST describes the size of an asteroid? Comparable to a moonSmallVariedMassiveI just put chemistry cuz there's no astronomy. Which science fiction premise is the best example of irony? There are 25 students in Mrs. Venetozzis class at the beginning of the school year, and the average number of siblings for each student is 3. A new student with 8 siblings joins the class in November. 41) Choose the best indirect object pronoun to replace the underlined word in the following sentence.Elle a dit la vrit Sylvie et Laure.luileuTrue or False: There is no adverb of manner if the adjective ends in "-ent" or "-ant".TrueFalseChoose the best translation of the following sentence. I paid for the skirt.J'ai pay la jupe.J'ai payi la jupe.J'ai payu la jupe.J'ai payert la jupe.Fill in the blank with the appropriate form of savoir or connatre as appropriate.Je _____ parler espagnol.saisconnaisWhich of the following IS a false cognate?la tomatele sandwichle raisinla bananeTrue or False: The negative of "pour" is "ne pour pas".TrueFalseFill in the blank with the French word that best completes the following sentence.Je ne vais jamais ___ avec lui.invitertromperralisersortirFill in the blank with the correct past participle of the verb in parenthesis.Elle nous a ___ (voir)vuvuevusvuesWhich of the following means the opposite of "tre renvoy"?tre paresseuxbosseurtre embauchRecevoirDecide if the following French sentence is grammatically correct or incorrect.Est-ce que le prof vous a parl?CorrectIncorrectFill in the blank with the French word that best completes the following sentence.Aprs la pluie, j'ai vu _____.un arc-en-cielun arbreune herbeun insecte For each situation write sentence beginning with IF1. I wasn't hungry , so I didn't eat anything2. The accident happened because you were not careful3. I could buy a house because my parents lent me money4. I'm late because my bus was latePlease help :) is immoral an adaptation? To join Iron Pump gym, members pay $45 per month. Ms. Curran has been a member of the gym for 3 months, and pays $200 for her membership. Write an equation that gives the total cost of the gym membership as a function of months. select three types of school which specifically emphasize learning through creativity, self expression, and play When humans look at the sky, it appears blue, but the Sun appears yellow. What causes this phenomenon? The product of two whole numbers is 180 and their sum is36. What are the two numbers? 1) A number is chosen at random from 1 to 25. Find the probability of not selectinga prime number.) A number is chosen at random from 1 to 25. Find the probability of selectinga prime number. Topic: Causes of World War 2 Who: What:When:How was it important to world war 2:PLEASE I NEED ASAP!!!!!!!!!!!!! put subterranean in a sentence who is lemuel haynes? ____ will develop pharyngeal arches. ____ will develop a postanal tail in the embryonic stage. What is the value of x in this triangle?Enter your answer as a decimal in the box. Round only your final answer to the nearest hundredth. The Valdez family left at noon for a 4-hour trip to visit relatives. They stopped 1 hour for lunch and 2 hours to visit an amusement park. What time did they get to their relatives' house?