The products that complete the reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH) are water (H₂O) and sodium chloride (NaCl).
Explanation:In the given chemical equation, HCl + NaOH, hydrochloric acid (HCl) reacts with sodium hydroxide (NaOH) to produce water (H₂O) and sodium chloride (NaCl). This reaction is a classic example of an acid-base neutralization reaction. The hydrogen ion (H⁺) from the acid combines with the hydroxide ion (OH⁻) from the base to form water, and the remaining ions, sodium (Na⁺) from the base and chloride (Cl⁻) from the acid, combine to form sodium chloride.
The balanced chemical equation for this reaction is:
HCl + NaOH → H₂O + NaCl
This equation illustrates the conservation of mass, with the same number of atoms of each element on both sides of the equation. The coefficients in the balanced equation indicate the stoichiometry of the reaction, showing the molar ratios between the reactants and products. In this case, one mole of hydrochloric acid reacts with one mole of sodium hydroxide to produce one mole of water and one mole of sodium chloride.
It's important to note that in a balanced chemical equation, the number of atoms of each element must be the same on both sides. This ensures that the law of conservation of mass is satisfied, meaning that no atoms are created or destroyed during the chemical reaction. In the case of the reaction between HCl and NaOH, the balanced equation accurately represents the chemical changes that occur during the neutralization process.
Full Question:Choose the products that complete the reaction. The chemical equations may not be balanced. HCL + NaOH →?
For the reaction ag2s(s) ⇌ 2 ag+ (aq) + s2- (aq), keq = 2.4 × 10-4 and the equilibrium concentration of silver ion is [ag+] = 2.5 × 10-1 m. what is [s2-] at equilibrium?
Answer : The concentration of silver ion is, [tex]3.8\times 10^{-3}M[/tex]
Explanation :
Equilibrium constant : It is defined as the equilibrium constant. It is defined as the ratio of concentration of products to the concentration of reactants.
The equilibrium expression for the reaction is determined by multiplying the concentrations of products and divided by the concentrations of the reactants and each concentration is raised to the power that is equal to the coefficient in the balanced reaction.
As we know that the concentrations of pure solids and liquids are constant that is they do not change. Thus, they are not included in the equilibrium expression.
The given equilibrium reaction is,
[tex]Ag_2S(s)\rightleftharpoons 2Ag^+(aq)+S^{2-}(aq)[/tex]
The expression of [tex]K[/tex] will be,
[tex]K_{eq}=[Ag^+]^2[S^{2-}][/tex]
[tex]2.4\times 10^{-4}=(2.5\times 110^{-1})^2[S^{2-}][/tex]
[tex][S^{2-}]=3.8\times 10^{-3}M[/tex]
Therefore, the concentration of silver ion is, [tex]3.8\times 10^{-3}M[/tex]
3.84 x 10⁻³ M
Further explanationGiven:
[tex]\boxed{K_{eq} = 2.4 \times 10^{-4}}[/tex]The equilibrium concentration of silver ion is [tex]\boxed{ \ [Ag^+] = 2.5 \times 10^{-1} \ M \ }[/tex].Question:
What is [S²⁻] at equilibrium?
The Process:
For the reaction [tex]\boxed{ \ Ag_2S_{(s)} \rightleftharpoons 2Ag^+_{(aq)} + S^{2-}_{(aq)} \ }[/tex], we can observe that the substances on the right-hand side have a solution phase (aq) that is allowed into the equilibrium constant K.
Remember, pure solids (s) and liquids (l) are disregarded and kept at 1.
Therefore, from the initial formula [tex]\boxed{ \ K = \frac{ [Ag^+]^2.[S^{2-}] }{[Ag_2S]} \ }[/tex] we get the final result [tex]\boxed{ \ K = [Ag^+]^2.[S^{2-}] \ }[/tex].
Let us find out [S²⁻] at equilibrium.
[tex]\boxed{ \ K_{eq} = [Ag^+]^2.[S^{2-}] \ }[/tex]
[tex]\boxed{ \ 2.4 \times 10^{-4} = [2.5 \times 10^{-1}]^2.[S^{2-}] \ }[/tex]
[tex]\boxed{ \ 2.4 \times 10^{-4} = 6.25 \times 10^{-2} \cdot [S^{2-}] \ }[/tex]
[tex]\boxed{ \ [S^{2-}] = \frac{2.4 \times 10^{-4}}{6.25 \times 10^{-2}} \ }[/tex]
Thus we get [S²⁻] at equilibrium equal to [tex]\boxed{ \ [S^{2-}] = 3.84 \times 10^{-3} \ M \ }[/tex]
- - - - - - - - - -
Notes:
[tex]\boxed{ \ K_c \ or \ K_{eq} \ }[/tex], denotes that the equilibrium constant is expressed using molar concentrations, i.e., [tex]\boxed{ \ mol.dm^{-3} \ or \ mol.L^{-1} \ \ }[/tex]. For this question, [tex]\boxed{ \ K_c \ }[/tex] means the same thing as [tex]\boxed{ \ K_{eq} \ }[/tex].The rIght-hand side of the equation on top, left-hand side of the equation on the bottom.The square brackets show concentrations in [tex]\boxed{ \ mol.dm^{-3} \ or \ mol.L^{-1} \ or \ M \ }[/tex].The indices are the numbers in front of each substance (or the coefficients) in the chemical equation.A heterogeneous balance consists of more than one phase. Typical examples include reactions involving solids and gases, or solids and liquids. Substances that can be included in formula K are substances with a gas phase (g) or aqueous phase (aq). Pure solids and liquids are unincluded in the equilibrium constant expression because they do not affect the reactant amount at equilibrium in the reaction, so they are disregarded and kept at 1.Learn moreWrite the equilibrium constant for the reaction https://brainly.com/question/10608589 Write the equilibrium constant for the reaction a heterogeneous balance https://brainly.com/question/13026406What is the Ksp of the salt at 22°C? https://brainly.com/question/8985555The key requirement for a chain reaction is that...
More neutrons are produced than are absorbed
Which three temperature readings all mean the same thing?
A. 373 Kelvin, 100 degrees Celsius, 273 degrees Fahrenheit.
B. 273 Kelvin, 100 degrees Celsius, 212 degrees Fahrenheit.
C. 100 Kelvin, 0 degrees Celsius, 32 degrees Fahrenheit.
D. 273 Kelvin, 0 degrees Celsius, 32 degrees Fahrenheit.
Answer: The correct answer is D. 273 Kelvin, 0 degrees Celsius, 32 degrees Fahrenheit.
Explanation:
Conversion of degree Celsius to Kelvin :
K=^oC+273
Conversion of degree Celsius to degrees Fahrenheit :
^oF=(\frac{9}{5}\times ^oC)+32
By using these two conversion factors, we get the three temperature readings all mean the same thing.
For option A :
K=^oC+273=100+273=373K
^oF=(\frac{9}{5}\times ^oC)+32=(\frac{9}{5}\times 100)+32=212^oF
For option B :
K=^oC+273=100+273=373K
^oF=(\frac{9}{5}\times ^oC)+32=(\frac{9}{5}\times 100)+32=212^oF
For option C :
K=^oC+273=0+273=273K
^oF=(\frac{9}{5}\times ^oC)+32=(\frac{9}{5}\times 0)+32=32^oF
For option D :
K=^oC+273=0+273=273K
^oF=(\frac{9}{5}\times ^oC)+32=(\frac{9}{5}\times 0)+32=32^oF
From the given options, only option (D) is correct.
Hence, the correct option is, (D) 273 Kelvin, 0 degrees Celsius, 32 degrees Fahrenheit
Hope this helps!
Temperature is a degree of measure of heat and coldness. Temperature readings that are the same are 273 Kelvin, 0 degrees Celsius, 32 degrees Fahrenheit.
What are the units of the temperature?Temperature tells about the hotness and the cold degree measure of any substance or object. It can be measured by Kelvin, Celsius or Fahrenheit scale.
Convert degree Celsius to kelvin as:
[tex]\begin{aligned}\rm K &= \rm ^{\circ} C+273\\\\&= 0 + 273 \\\\&= 273 \;\rm kelvin\end{aligned}[/tex]
Convert degree Celsius to Fahrenheit as:
[tex]\begin{aligned}^{\circ} \rm F & = \rm (\dfrac{9}{5}\times ^{\circ} C)+32\\\\&= 0 + 32\\\\&= 32 \;\rm Fahrenheit \end{aligned}[/tex]
Therefore, option D. 273 Kelvin, 0 degrees Celsius, 32 degrees Fahrenheit is the temperature reading that means the same.
Learn more about temperature units here:
https://brainly.com/question/2800860
Refer to the example about diatomic gases A and B in the text to do problems 19 - 27. How many grams in 3 moles of A2?
a.) 1.5
b.) 3
c.) 6
Final answer:
To find the number of grams in 3 moles of A2, we can use the formula: grams = moles * molar mass. In this case, the number of grams would be 6X grams.
Explanation:
To determine the number of grams in 3 moles of A2, we need to know the molar mass of A2. Assuming A is a diatomic gas, its molar mass would be the sum of the atomic masses of the two atoms in its formula. Let's say the atomic mass of A is X and the atomic mass of B is Y. Since A2 has two atoms of A, the molar mass of A2 would be 2X. Therefore, to find the number of grams in 3 moles of A2, we can use the formula: grams = moles * molar mass. In this case, the number of grams would be 3 * 2X = 6X grams. Hence, the correct option is c.) 6.
The correct answer is c.) 6. in 3 moles of A2 (with an assumed atomic mass of 3 units for element A), there are 18 grams.
Explanation:To determine the number of grams in 3 moles of A2, we first need to find the molar mass of A2. The molar mass of a substance is the mass in grams of one mole of that substance. Since A2 represents a diatomic molecule (two atoms of A), we'll calculate the molar mass by adding the atomic masses of two atoms of element A.
Looking at the periodic table, suppose the atomic mass of element A is X units. As A2 consists of two atoms of A, the molar mass of A2 is 2 * X units.
Without specific atomic masses provided, let's assume a hypothetical atomic mass of 3 units for element A. Therefore, the molar mass of A2 would be 2 * 3 = 6 units.
Now, to find the grams in 3 moles of A2, we use the formula:
[tex]\[ \text{Grams} = \text{Number of Moles} \times \text{Molar Mass} \][/tex]
Plugging in the values, we get:
[tex]\[ \text{Grams} = 3 \, \text{moles} \times 6 \, \text{units/mol} = 18 \, \text{units} \][/tex]
Thus, in 3 moles of A2 (with an assumed atomic mass of 3 units for element A), there are 18 grams.
This calculation relies on the assumed atomic mass for element A. However, the specific atomic masses for the elements A and B in the diatomic gases are essential for accurate calculations. The given question lacks this information, so the assumption of the atomic mass was necessary for computation.
CHEMISTRY QUESTION WILL MARK YOU BRAINLIEST!
Based on Boyle's law, which of the following statements is true for an ideal gas at a constant temperature and mole amount?
A. Pressure is directly proportional to volume.
B. Pressure is inversely proportional to volume.
C. The number of collisions is independent of pressure.
D. The number of collisions decreases with increase in pressure.
Answer:
Based on Boyle's law, which of the following statements is true for an ideal gas at a constant temperature and mole amount?
A) Pressure is directly proportional to volume.
B) Pressure is inversely proportional to volume. CORRECT ANSWER!!!
C) The number of collisions is independent of pressure.
D) The number of collisions decreases with increase in pressure.
B is the CORRECT answer!!!
Based on Boyle's law, pressure is inversely proportional to volume is true for an ideal gas at a constant temperature and mole amount.
What is Boyle's law?Boyle’s law is a gas law which states that the pressure exerted by a gas (of a given mass, kept at a constant temperature) is inversely proportional to the volume occupied by it. In other words, the pressure and volume of a gas are inversely proportional to each other as long as the temperature and the quantity of gas are kept constant.
Boyle’s law is a connection between pressure and volume. It asserts that under constant temperature, the pressure of a specific quantity of gas is inversely proportional to its volume. It is possible to prove the law empirically. The paper discusses a syringe-based experimental approach for verifying the law.
The mathematical equation for Boyle's law is, where P denotes the pressure of the system, V denotes the volume of the gas, k is a constant value representative of the temperature and volume of the system.
The correct answer is option B.
Learn more about Boyle's law, refer:
brainly.com/question/12817429
#SPJ2
Which of the following is the major regulator of oxygen consumption during oxidative phosphorylation?
a.NADH
b.NAD+
c.NADPH
d.NADP+
e.ATP
f.ADP
g.O2
h.H20
i.CO2
Answer:
f.ADP
Explanation:
Oxidative phosphorylation occurs during the electron transport chain which is the final phase of cellular respiration. It depends on the hydrogen ion concentration gradient generated and is maintained by the electron transport chain. The oxidative phosphorylation acquires energy of high-energy electrons to synthesize ATP. During this process ADP is the major regulator of oxygen consumption.The regulation by ADP is referred to as the acceptor or respiratory control.Answer: F. ADP
Explanation:
The level of ADP is the most important factor in the determination of the rate of Oxidative Phosphorylation.
The rate of oxygen utilization by the Mitochondria is increased when ADP is added and usually returns to its initial level when the added ADP has being converted to ATP.
People can become a part of a When a person becomes part of an electrical that person can be shocked
Do you mean people become part of a 'circut' when a person becomes part of an electrical current?
Answer:
Circuit
Explanation:
People become part of the circuit
If you have 10 grams of a substance that decays with a half-life of 14 days, then how much will you have after 70 days?
a.0.31 g
b.0.10 g
c.2.50 g
d.1.25 g
Answer:
a. 0.31 g
Explanation:
It is known that the decay of a radioactive isotope isotope obeys first order kinetics.Also, it is clear that in first order decay the half-life time is independent of the initial concentration.Half-life time is the time needed for the reactants to be in its half concentration.If reactant has initial concentration [A₀], after half-life time its concentration will be ([A₀]/2).The half-life time of the substance = 14 days.So, 70 days represent (70 days/ 14 days = 5.0 half-lives).
So, the substance will decay:
10 g → (first half-life = 14 days) 5 g → (second half-life = 28 days) 1.5 g → (third half-life = 42 days) 1.25 g → (fourth half-life = 56 days) 0.625 g → (fifth half-life = 70 days) 0.3125 g.
So, the right choice is: a. 0.31 g.
Answer:
0.31 g
Explanation:
proved the answer right below
How many additional grams of KOH are required to increase the concentration of the solution to 0.500 m? G
Answer: 21.9
Explanation:
I got it right
THERE ARE FOUR SOLUTIONS: A, B, C, D. SOLUTION A YIELDS 3 PROTONS UPON IONIZATION, SOLUTION B IS AN ELECTRON PAIR DONOR, SOLUTION C IS AN OH- PRODUCER, AND SOLUTION D IS AN ELECTRON PAIR ACCEPTOR. WHICH OF THE FOLLOWING STATEMENTS IS TRUE.
A)C IS AN ACID
B)D IS A BASE
C)B IS A BASE
D)A IS A TRIPROTIC BASE
Answer:
The correct answer is C) B is a base. I just did it.
Explanation:
A negative change in entropy indicates that...
A. the products have a greater number of available energy microstates than the reactants.
B. the products have a smaller number of available energy microstates than the reactants.
Answer: Option (B) is the correct answer.
Explanation:
Entropy is the measure of randomness present within the molecules of a substance.
When entropy of a reaction has a positive sign then it means there is an increase in the entropy. On the other hand, when entropy of a reaction has a negative sign then it means there is a decrease in entropy.
As, entropy change = entropy of products - entropy of reactants
And, larger is the value of entropy more will be the number of microstates.
When entropy is negative then entropy of products is less than the entropy of reactants.
This also means that products have small number of available energy microstates than reactants.
Thus, we can conclude that a negative change in entropy indicates that the products have a smaller number of available energy microstates than the reactants.
Answer:
A negative charge of entropy indicates that the product has a smaller number of available energy microstates than the reactants.
Explanation:
Entropy can be defined as the thermodynamic property of the system associated with the randomness of the molecules. The energy of entropy is represented as the mathematical flow for the availability of the reactants and products.
When the entropy has a negative charge, this indicates that there is a decrease in the entropy of the system.
A positive charge of entropy indicates the increase in the energy of the system. This indicates that there is a greater number of available microstates for the product.
With a negative charge, there is a decrease i.e. the available energy microstates are smaller for the product stating the product has lesser energy as compared to the reactants.
For more information, refer the link:
https://brainly.com/question/13146879?referrer=searchResults
NH+4 is known as a _____________.
A. Polyatomic ion
B. Polycompound ion
C. Multi-atomic ion
D. None of these
A. Polyatomic Ion
Why? Nitrogen and Hydrogen are covalently bonded, and there are 4 Nitrogen atoms (fitting the prefix “poly”, meaning “many”).
[tex]NH^{+ 4}[/tex] is a A. Polyatomic ion
Explanation:When two atoms combine with each other through a covalent bond it leads to the formation of charged species called as polyatomic ions.
The ammonium cation is a decidedly accused polyatomic particle of the synthetic recipe [tex]NH^{+ 4}[/tex]. It is shaped by the protonation of ammonia. Ammonium is additionally a general name for decidedly charged or protonated substituted amines and quaternary ammonium cations [tex](NH^{+ 4})[/tex], where at least one hydrogen molecules are supplanted by natural gatherings.
Draw the structure of the alkyl bromide from which the alkyl acetate shown below was made by SN2 reaction.
Show all stereochemistry.
Hi there nice to meet u thank you
The removal of silver tarnish from silverware using aluminum foil and a solution of electrolyte is an example of 1. oxidation of aluminum metal. 2. an example of an electrochemical cell. 3. all of these 4. reduction of silver ions.
Answer:
[tex]\boxed{\text{3. All of these}}[/tex]
Explanation:
The tarnish on silverware is silver sulfide.
You can remove the tarnish by resting the silverware on a piece of aluminium foil in a pot of boiling water with a small amount of salt.
The reaction is an example of an electrochemical cell.
The half-cell reactions are
3×[Ag₂S(s) + 2e⁻ ⟶ 2Ag(s) + S²⁻(aq)]
2×[Al(s) ⟶ Al³⁺(aq) + 3e⁻]
2Al³⁺(aq) + 3S²⁻(aq) ⟶ Al₂S₃(s)
3Ag₂S(s) + 2Al(s) ⟶ 6Ag(s) + Al₂S₃(s)
The aluminium ions react with the sulfide ions to form aluminium sulfide.
The aluminum atoms lose three electrons each, so they are oxidized.
The silver atoms gain one electron each, so they are reduced.
Thus, the answer is [tex]\boxed{\textbf{3. All of these}}[/tex].
While working in the chemistry lab, you dissolve 2.5g of sodium hydroxide chips into a beaker containing 50mL of water. As you pick up the beaker to add it to a separate solution, you notice the outside of the beaker is very warm. What explains this rise in temperature?
Answer:
Energy was released when the sodium and hydroxide ions formed new bonds with the water.
Explanation:
Answer:
The lattice enthalpy of sodium hydroxide is less than the sum of hydration enthalpies of hydroxide ions and sodium ions.
Explanation:
Lattice enthalpy is defined as heat energy required to break 1 mole of crystal lattice.
Hydration enthalpy is defined as amount energy released when 1 mole of ions undergo hydration (surrounding of water molecules).It is always negative.
Enthalpy of solution = Lattice enthalpy + hydration enthalpy
If amplitude of lattice enthalpy > hydration enthalpy , enthalpy of solution will positive.Hence, solution will feel cool.If magnitude Lattice enthalpy < hydration enthalpy, enthalpy of solution will negative.Hence solution will feel warm or hot.Reaction between sodium hydroxide and water is an example of an exothermic reaction. During this process sodium hydroxide dissociates into sodium ions and hydroxide ions into the water.
The rise in temperature is due to hydration enthalpy of hydroxide ions and sodium ions is greater than that of the lattice enthalpy of the sodium hydroxide. This is the reason behind the warmth of the sodium hydroxide solution.
Select the correct answer. Which statement describes the acid found in vinegar (acetic acid)? A. It tastes bitter. B. It feels slippery. C. It changes red litmus paper to blue. D. It reacts with Mg to produce H2. E. It releases OH- in a solution.
Answer:
D. It reacts with Mg to produce H2.
Answer: Option (D) is the correct answer.
Explanation:
The acetic acid, [tex](CH_{3}COOH)[/tex] present in vinegar reacts wit magnesium and therefore, it releases hydrogen gas and magnesium acetate.
The chemical reaction will be as follows.
[tex]2CH_{3}COOH + 2Mg \rightarrow 2Mg(CH_{3}COO) + H_{2}[/tex]
An acid is a substance which has pH less than 7 and changes blue litmus red. Acids taste sour as they are acidic in nature and releases hydrogen ions.
Whereas bases have pH greater than 7 and changes red litmus into blue.Bases taste bitter and releases hydroxide ions.
Thus, we can conclude that the statement it reacts with Mg to produce [tex]H_{2}[/tex] best describes the acid found in vinegar (acetic acid).
What is peroxide (H2O2) oxidized to during redox reactions?
Answer:
H2O2 - - - - - -> H2O + O2
+1 +2 0
Oxidation O. S.
state of of Oxygen
Oxygen
[tex]2H_{2}O_{2}[/tex]---------> [tex]2H_{2}O+O_{2}[/tex] is the equation given for the oxidation of peroxide during a redox reaction.
What is a redox reaction?The reaction in which both oxidation and reduction can simultaneously occur to give raise to product is called as redox reaction.
The term redox is from 2 different words namely reduction and oxidation.Oxidation means the loss of electrons or increase in the oxidation state, reduction means the gain of electrons and decrease in the oxidation state.Redox reactions generally involve the transfer of electrons.To learn more about redox reactions, refer:
https://brainly.com/question/13293425
#SPJ2
I need help. Please help me on the question
Th answer is A. Hormones are chemical receptors and the x structure is taking it to the nucleus
The table below gives the data that is needed to calculate the average atomic mass of element B. Isotope Atomic mass (amu) Relative abundance (%) B-10 10.01 19.91 B-11 11.01 80.09 Based on these data, what is the average atomic mass of element B? 10.01 10.51 10.81 11.01
Answer:
[tex]\boxed{\text{10.81 u}}[/tex]
Explanation:
The atomic mass of B is the weighted average of the atomic masses of its isotopes.
We multiply the atomic mass of each isotope by a number representing its relative importance (i.e., its percent of the total).
Set up a table for easy calculation:
[tex]\begin{array}{ccccr}\textbf{Atom} & \textbf{Mass/u} &\textbf{Percent} & \textbf{Calculation}& \textbf{Result}\\^{10}\text{B}& 10.01 & 19.91 & 10.01 \times 0.1991 & 1.99\\^{11}\text{B}& 11.01 & 80.09 & 11.01 \times 0.8009 & 8.82 \\& & & \text{TOTAL} = &\textbf{10.81}\\\end{array}[/tex]
The average atomic mass of B is [tex]\boxed{\textbf{10.81 u}}[/tex].
Answer:
10.81u
Explanation:
I just did the test
The Tyndall effect is used to distinguish between
a. solutions and colloidsb. solvents and solutesc. liquids and gasesd. electrolytes and nonelectrolytes
A. solutions and colloids
4.8 kg of sulfur dioxide contains how many molecules?
4.5 x 10^25 molecules of SO2
How much o2 reacts completely with 4.0 moles of ch3oh in the reaction 2 ch3oh + 3 o2 → 2 co2 + 4 h2o ?
Answer:
= 6.0 moles
Explanation:
The equation for the reaction is;
2 CH3OH + 3 O2 → 2 CO2 + 4 H2O
We are given 4.0 moles of CH3OH.
From the reaction; 2 moles of CH3OH requires 3 moles of O2,
Therefore; moles of Oxygen will be;
= 4.0 moles × 3/2
= 6.0 moles
Therefore; 6.0 moles of Oxygen gas are required to react completely with 4.0 moles CH3OH.
The human body is made up of cells. The cells are like building blocks that are put together in just the right way to create a human. The cells of a human body can best be compared to a atoms in matter b thermal energy c oxygen in plants d conduction in heat transfer
Answer: i would personly say it would be atomos in matter because that mostly how human cells work
which type of covalent bond is the shortest and the strongest
a. single bond
b. double bond
c. triple bond
d. ionic bond
Answer:
c. triple bond
Explanation:
Triple bonds are shortest and strongest covalent bond occur when six electrons are shared between two atoms.Bond strength is directly proportional to the amount of energy required to break the bond between the two atoms. The more energy required, the strongest the bond is . Bond length is the distance between two bonded atoms nuclei.Triple bonds are shorter and stronger than double bonds. While double bonds have shorter distances than single bonds.The shortest and strongest covalent bond is the triple bond. It involves the sharing of three pairs of electrons between two atoms, making it stronger and shorter than single and double bonds. An ionic bond is a different kind of bonding involving the transfer of electrons.
Explanation:In terms of covalent bonds, the triple bond is both the shortest and the strongest. Covalent bonds are a category of chemical bonding where two atoms share one or more electron pairs. Single bonds are longer and weaker since they involve the sharing of only one pair of electrons. Double bonds involve two pairs and are shorter and stronger. Triple bonds, such as those found in a nitrogen molecule (N2), are the shortest and strongest since they involve the sharing of three pairs of electrons. The ionic bond is not a type of covalent bond, it's a completely different kind of bonding which involves the transfer of electrons from one atom to another, not sharing.
Learn more about Covalent Bonds here:https://brainly.com/question/19382448
#SPJ3
The freezing point and the boiling point of water can be altered by a variety of
techniques.
Which of the following has little or no effect on the boiling point of water?
a. Increasing the air pressure above the liquid
b. Adding alcohol to the water
c. Adding sodium chloride to the water
d. Increasing the amount of water
Answer:
Option d. increasing the amount of water has no effect of the boiling point of water.Explanation:
The boiling point is defined as the tempearature at which the vapor pressure of a substance equals the atmospheric pressure.
The vapor pressure is the pressure exerted by the vapor particles above the liquid in a sealed container.
In order to a liquid boil, the particles must have enough kinetic energy to escape from the tliquid to the gas (vapor) phase. With that we can approach the choices:
a. Increasing the air pressure above the lquid.
Incorrect choice.
If the air pressure above the liquids is increased, then the liquid particles will need more energy to escape, which means that this change has a considerable effect on increasing the boiling point.
b. Adding alcohol to the water.
Incorrect choice.
The alcohol added to the water is a solute. Some of the particles of the alcohol added will ocuppy part of the surface of liquid, reducing the number of particles of water that can escape from the liquid phase to the gas state. This reduces the vapor pressure and cause that the boiling point increase. Then, adding alcohol to the water does has an effect on the boiling point (the boiling point will increase).
c. Adding sodium chloride to the water.
Incorrect choice.
As in the case of adding alcohol, sodium chloride is a solute. Thus, the same analysis drives the condlusion that adding sodium chloride to the water does has an effect on the boiling point (the boiling point will increase).
d. Increasing the amount of water.
Correct choice.
The boiling point is a specific property of the substance: it does not depend on the amount of substance. Then, increasing the amount of water will not affect the boiling point.
A sample of pure calcium fluoride with a mass of 15.0 g contains 7.70 g of calcium. How much calcium is contained in 40.0 g of calcium fluoride?
To find how much calcium is contained in 40.0 g of calcium fluoride, calculate the moles of calcium fluoride and then determine the moles of calcium using its mass. 40.0 g of calcium fluoride contains 0.192 mol of calcium.
Explanation:To calculate the amount of calcium in 40.0 g of calcium fluoride, we need to first determine the molar mass of calcium fluoride (CaF2), which is 78.08 g/mol. Next, we can calculate the moles of calcium fluoride in 40.0 g using the formula:
Moles = Mass / Molar mass = 40.0 g / 78.08 g/mol = 0.512 mol
Since the calcium fluoride contains 7.70 g of calcium, we can determine the moles of calcium using its molar mass (40.08 g/mol):
Moles of calcium = Mass of calcium / Molar mass of calcium = 7.70 g / 40.08 g/mol = 0.192 mol
Therefore, 40.0 g of calcium fluoride contains 0.192 mol of calcium.
Learn more about Calcium fluoride here:https://brainly.com/question/28947194
#SPJ3
calculate the concentration in parts per million (ppm) of DDT if a sample size of 2000 g contained 0.050 g DDT
Answer:
= 25 ppm
Explanation:
PPM also refers to parts per million, it represents a low concentration of a solution. It represents 0.001 gram or a milligram in a 1000 mL, which equivalent to 1 mg per liter.Given; a sample size of 2000 g contained 0.050 g DDT
It means, 2000 mL sample contained 50 mg DDT
Therefore in ppm we get;
= 50 mg/ 2 L
= 25 mg/L
= 25 ppm
The concentration of DDT in your sample is calculated by dividing the mass of DDT by the total mass and multiplying by 1,000,000. Using your provided values, the DDT concentration is 25 parts per million (PPM).
Explanation:In the context of your question, you want to know the concentration of DDT in a sample size of 2000 g which contains 0.050 g of DDT in terms of parts per million (PPM). PPM is a unit typically used to express concentrations of pollutants and other trace contaminants in similar low concentration scenarios.
To calculate the concentration in PPM, the formula is quite straightforward. You divide the mass of the contaminant by the total mass of the sample, then multiply the result by 1,000,000.
Using your values:
(mass of DDT / total mass) * 1,000,000 = (0.050g / 2000g) * 1,000,000 = 25 ppm.
This means that there are 25 parts of DDT per every 1,000,000 parts of the sample.
Learn more about parts per million here:https://brainly.com/question/25104378
#SPJ12
What will be the cell potential for a cu−zn galvanic cell with [zn2+]=0.1 m and the [cu2+]=0.01 m? view available hint(s)?
Answer: 1.07 V
Explanation: [tex]E^0_{[Zn^{2+}/Zn}=-0.76V[/tex]
[tex]E^0_{[Cu^{2+}/Cu]}=+0.34V[/tex]
The metal with negative reduction potential will easily lose electrons and thus is oxidized and the one with positive reduction potential will easily gain electrons and thus is reduced.
[tex]Zn+Cu^{2+}\rightarrow Zn^{2+}+Cu[/tex]
[tex]E^o_{cell}[/tex] = standard electrode potential =[tex]E^0_{cathode}- E^0_{anode}=0.34-(-0.76)=1.1V[/tex]
Using Nernst equation:
[tex]E_{cell}=E^o_{cell}-\frac{0.0592}{n}\log \frac{[Zn^{2+}]}{[Cu^{2+}]}[/tex]
where,
n = number of electrons in oxidation-reduction reaction = 2
[tex]E_{cell}=1.10-\frac{0.0592}{2}\log \frac{[0.1]}{[0.01]}[/tex]
[tex]E_{cell}=1.07V[/tex]
What type of bond joins glycerol to fatty acids?
Ester linkages
Amine linkages
Carbohydrate linkages
Phosphate linkages
Answer:
Ester Linkages
Explanation:
In a fat molecule, the fatty acids are attached to each of the three carbons of the glycerol molecule with an ester bond through the oxygen atom.
You're welcome
The bond that joins glycerol to fatty acids in lipids like triglycerides and phospholipids is the ester linkage.
Explanation:The type of bond that joins glycerol to fatty acids in fat molecules and phospholipids is the ester linkage. Glycerol, which is a triol, bonds with three fatty acids, each through an ester bond, during a dehydration synthesis reaction. This reaction forms a triglyceride, which is a type of lipid essential for storing energy and providing insulation. In triglycerides, the fatty acids are attached to glycerol's three carbons through an oxygen atom, forming a strong ester bond. In the case of phospholipids, which are the major constituents of cell membranes, two fatty acid chains and a phosphate group form ester linkages with the glycerol backbone.
Two samples of carbon come into contact. Heat will transfer from Sample A to Sample B if the average kinetic energy of Sample A's atoms is _______ the average kinetic energy of Sample B's atoms.
Answer:
The right word to fill the blank space is GREATER THAN.
Explanation:
In nature, heat in form of temperature is usually transfer from the region of higher temperature to the region of lower temperature. Thus, for heat to be transfer from one substance to another one, the temperature will flow from the body with the higher temperature to that which has a lower temperature, the substance that is giving out the heat must have a higher temperature.
Explanation:
When two substances of different temperature are in contact with each other then heat will flow from hot object to cold object until a thermal equilibrium is maintained between them.
Kinetic energy is the energy obtained due to the motion of an object is known as kinetic energy. Total kinetic energy of all the particles present in a system is known as average kinetic energy.
Thus, we can conclude that when two samples of carbon come into contact. Heat will transfer from Sample A to Sample B if the average kinetic energy of Sample A's atoms is greater than the average kinetic energy of Sample B's atoms.