A pressure gage connected to a tank reads 55 kPa at a location where the atmospheric pressure is 72.1 cmHg. The density of mercury is 13,600 kg/m3 . Calculate the absolute pressure in the tank.

Answer:

Explanation:

Given

velocity of launch [tex]u=50\ m/s[/tex]

Target is [tex]R=65\m\ away[/tex]

Suppose [tex]\theta [/tex] is the launch angle

We know Range of Projectile is

[tex]R=\frac{u^2\sin 2\theta }{g}[/tex]

[tex]65=\frac{50^2\times \sin 2\theta }{9.8}[/tex]

[tex]\sin 2\theta =0.254[/tex]

because [tex]\sin \theta =\sin (180-\theta )[/tex]

so either [tex]2\theta =14.71[/tex]

[tex]\theta =7.35^{\circ}[/tex]

or [tex]180-2\theta =14.71[/tex]

[tex]\theta =82.64^{\circ}[/tex]

Answer

given,

diameter of telescope = 2 m

time to collect area = 1 hour

Diameter of the another telescope = 6 m

The light collected by the telescope is directly proportional to the area of its primary mirror.

Area of the mirror is directly proportional to the square of diameter.

so,

6 m diameter telescope will carry (6/2)² = 9 times more light than 2 m telescope.

Time taken to collect light = 60/9 = 6.67 minutes.

now, For 12 m telescope

12 m diameter telescope will carry (12/2)² = 36 times more time than 2 m telescope.

Time taken by 12 m telescope to collect light= 60/36 = 1.7 minutes.

To find the time required for a 6-m telescope and a 12-m telescope to perform the same task as a 2-m telescope, we can use a formula and rearrange it to solve for the time taken.

To find out how much time would be required for a 6-m telescope and a 12-m telescope to perform the same task as a 2-m telescope, we can use the formula:

(light collected by telescope 1) × (time taken by telescope 1) = (light collected by telescope 2) × (time taken by telescope 2)

Let's solve for the time taken by the 6-m telescope and the 12-m telescope:

By rearranging the equation and solving for the time, we can find the answer.

https://brainly.com/question/32814773

#SPJ3

Answer:

451977.40113 N/C

Explanation:

[tex]\epsilon_0[/tex] = Permittivity of free space = [tex]8.85\times 10^{-12}\ F/m[/tex]

[tex]\sigma[/tex] = Surface charge density = [tex]4\ pc/mm^2[/tex]

Electric field near the surface of a charged conductor is given by

[tex]E=\dfrac{\sigma}{\epsilon_0}\\\Rightarrow E=\dfrac{4\times 10^{-12}\times 10^{6}}{8.85\times 10^{-12}}\\\Rightarrow E=451977.40113\ N/C[/tex]

The electric field is 451977.40113 N/C

Answer:

[tex]L=4.19*10^{-6}H[/tex]

Explanation:

The self-inductance of a solenoid is defined as:

[tex]L=\frac{\mu N^2A}{l}[/tex]

Here [tex]\mu_0[/tex] is the the permeability of free space, N is the number of turns in the solenoid, A is the cross-sectional area os the solenoid and l its length. We replace the given values to get the self-inductance:

[tex]L=\frac{4\pi*10^{-7}\frac{T\cdot m}{A}(100)^2(1*10^{-4}m^2)}{30*10^{-2}m}\\L=4.19*10^{-6}H[/tex]

The self-inductance of the given solenoid would be approximately 1.395x10^-5 H. The calculation involved substituting known variables into the formula for self-inductance and solving.

The self-inductance of a solenoid can be calculated using the formula: L = µ₀n²A/l where L is the self-inductance, µ₀ is the permeability of free space, n is the number of turns per unit length, A is the cross-sectional area, and l is the length of the solenoid.

In this scenario, the cross-sectional area (A) = 1.00 × 10⁻⁴ m², length of the solenoid (l) = 30.0 cm = 0.3m, and the number of turns (n) = 100, so n (number of turns per unit length) = 100/0.3 = 333.33 turns/m. µ₀, the permeability of free space is a constant which is given as 4π × 10⁻⁷ T m/A. So, substituting these values into the formula will give:

L (self-inductance) = 4π × 10⁻⁷ T m/A * (333.33 /m)² * 1.00 × 10⁻⁴ m² / 0.3 m = 1.395x10^-5 H, (where H indicates henries, the unit for inductance)

https://brainly.com/question/40927173

#SPJ11

Answer:

a) 75.5 degree relative to the North in north-west direction

b) 309.84 km/h

Explanation:

a)If the pilot wants to fly due west while there's wind of 80km/h due south. The north-component of the airplane velocity relative to the air must be equal to the wind speed to the south, 80km/h in order to counter balance it

So the pilot should head to the West-North direction at an angle of

[tex]cos(\alpha) = 80/320 = 0.25[/tex]

[tex]\alpha = cos^{-1}(0.25) = 1.32 rad = 180\frac{1.32}{\pi} = 75.5^0[/tex] relative to the North-bound.

b) As the North component of the airplane velocity cancel out the wind south-bound speed. The speed of the plane over the ground would be the West component of the airplane velocity, which is

[tex]320sin(\alpha) = 320sin(75.5^0) = 309.84 km/h[/tex]

Answer:

a) Ф=14°, north of west

b) 310 km/h

Explanation:

we have,

[tex]v_{p/G}[/tex], velocity of plane relative to the ground(west)

[tex]v_{p/A}[/tex],velocity of plane relative to the air(320 km/h)

[tex]v_{A/G}[/tex],velocity of air relative to the ground(80 km/h, due south).

                 [tex]v_{p/G}[/tex]=[tex]v_{p/A}[/tex]+[tex]v_{A/G}[/tex].........(1)

a)     sin(Ф)=[tex]\frac{v_{A/G}}{v_{p/A}}[/tex]

                 =[tex]\frac{80km/h}{320km/h}[/tex]              

Ф=14°, north of west

b)    using Pythagorean theorem

[tex]v_{p/G}=\sqrt{v^2_{p/A}+v^2_{A/G}}[/tex]

[tex]v_{p/G}[/tex]=310 km/h

note:

diagram is attached

Answer:

f = 200[Hz]; L=1500[km]  

Explanation:

We know that frequency is the reciprocal of the period, therefore.

[tex]f=\frac{1}{T} \\f=1/0.005\\f=200[Hz][/tex]

And the wavelength is determined using the following equation.

[tex]L=\frac{c}{f} \\where:\\c = light speed = 3*10^{8}[m/s]\\ f = frecuency [Hz]\\L = wavelength [m]\\L= 3*10^{8}/ 200\\ L = 1500000[m] = 1500[km][/tex]

Final answer:

The frequency of a carrier wave with a period of 0.005 seconds is calculated to be 200 Hz. The wavelength cannot be determined without additional information on the wave's speed.

Explanation:

The question involves calculating the frequency and wavelength of a carrier wave given its period (T=0.005 seconds). The frequency (f) of a wave is the reciprocal of its period, defined by the equation f = 1/T. Therefore, for a period of 0.005 seconds, the frequency would be f = 1/0.005 Hz, which equals 200 Hz. To determine the wavelength (λ), we would need the speed (v) of the wave, which is typically the speed of light (c) for electromagnetic waves, but since the speed and specific type of wave are not provided, we can't calculate the wavelength directly from the given information here.

Answer:

616.223684211 N

Explanation:

[tex]F_r[/tex] = Resistive force on the wheel = 115 N

F = Force acting on sprocket

[tex]r_2[/tex] = Radius of sprocket = 4.75 cm

[tex]r_1[/tex] = Radius of wheel = 25 cm

Moment of inertia is given by

[tex]I=mr_1^2\\\Rightarrow I=1.7\times 0.25^2\\\Rightarrow I=0.10625\ kgm^2[/tex]

Torque

[tex]\tau=I\alpha\\\Rightarrow \tau=0.10625\times 4.9\\\Rightarrow \tau=0.520625\ Nm[/tex]

Torque is given by

[tex]\tau=Fr_2-F_rr_1\\\Rightarrow F=\dfrac{\tau+F_rr_1}{r_2}\\\Rightarrow F=\dfrac{0.520625+115\times 0.25}{0.0475}\\\Rightarrow F=616.223684211\ N[/tex]

The force on the chain is 616.223684211 N

Incomplete question.The complete question is here

If the separation between the first and the second minima of a single-slit diffraction pattern is 6.0 mm, what is the distance between the screen and the slit? The light wavelength is 500 nm and the slit width is 0.16 mm.

Answer:

The distance between first and second minimum is 1.92m

Explanation:

Given data

Wavelength of light λ=500nm

Slit width D=0.16 mm

The distance between first and second minima is 6.0 mm

To find

Distance L between the screen and the slit

Solution

As we know that

Yn=(nλL)/D

Where is L is distance between the slit and screen

D is slit width

n is order of minimum

Yn is distance of nth minimum from center maximum

λ is wavelength of light

The Distance between first and second minimum is given as:

Y₂-Y₁=6 mm

(2λL)/D-(1λL)/D=6 mm

(2λL-1λL)/D=6 mm

(λL/D)=6 mm

[tex]L=\frac{6mm(0.16mm)}{500nm}\\ L=1.92m[/tex]

The distance between first and second minimum is 1.92m

Final answer:

The screen distance is 0.19 meters, calculated using the separation between minima, slit width, and light wavelength in single-slit diffraction.

Explanation:

Solve for the distance between the screen and the slit (L).

1. Given Values:

Separation between minima (Δx) = 6.0 mm (convert to meters: 0.0060 m)

Wavelength of light (λ) = 500 nm (convert to meters: 500 x 10⁻⁹ m)

Slit width (a) = 0.16 mm (convert to meters: 0.16 x 10⁻³ m)

2. Relate Separation and Screen Distance:

We can use the relationship between the angular separation (Δθ) and the linear separation (Δx) on the screen:

Δθ ≈ Δx / L

3. Relate Separation and Minimum Position:

We know the separation (Δθ) is related to the difference between the positions of the first (m = 1) and second (m = 2) minima:

Δθ = θ₂ - θ₁ = (λ / a)

4. Combine Equations:

Substitute the equation for Δθ from step 3 into the equation from step 2:

(λ / a) ≈ Δx / L

5. Solve for Screen Distance (L):

Now we can arrange the equation to solve for L:

L ≈ Δx * a / λ

6. Plug in the Values:

L ≈ (0.0060 m) * (0.16 x 10⁻³ m) / (500 x 10⁻⁹ m)

7. Calculate and Round:

L ≈ 0.192 m (round to two significant figures)

Therefore, the distance between the screen and the slit is approximately 0.19 meters.

Answer:

.A. positive, positive.

Explanation:

When we throw a rock upward , it will decelerate due to gravitation . It will have acceleration in downward direction or - ve acceleration in upward direction.

If we define the ground as the origin and upward direction as positive , anything in upward direction will be positive and in downward direction will be negative . For example , in the case described above , acceleration of rock thrown upward is negative because is  in downward direction .

Its position is in upward direction , so its position is positive with respect to ground.

It is going in upward direction  . So velocity too will be positive.

Answer:

53 m/s

Explanation:

Since we take the positive x-direction to be toward the north, an SUV travelling to the south would have a negative velocity, -18m/s, relative to Earth. Velocity of Earth relative to the SUV would be 18m/s. And velocity of police car relative to Earth would be positive, 35 m/s.

Velocity of police relative to SUV would equal to velocity of police car relative to Earth plus velocity of Earth relative to SUV

= 35 + 18 = 53 m/s

Answer:

Explanation:

Given

Speed of block at bottom is [tex]v=3.8\ m/s[/tex]

Distance traveled [tex]s=6\ m[/tex]

initial velocity is zero

using equation of motion

[tex]v^2-u^2=2as[/tex]

where v=final velocity

u=initial velocity

a=acceleration

s=displacement

[tex](3.8)^2-0=2\times a\times 6[/tex]

[tex]a=1.203\ m/s^2[/tex]

when it is 3 m from top then

[tex]v^2-u^2=2as[/tex]

[tex]v^2-0=2\times 1.203\times 3[/tex]

[tex]v=2.68\ m/s[/tex]      

The problem is a physics question on kinematics, which requires calculating the speed of a block half-way down a frictionless incline using the kinematic equation for constant acceleration.

The student's question involves finding the speed of a block at a certain point as it slides down a frictionless incline. The kinematics of motion on an inclined plane is the focus here. We are given the speed of the block after traveling 6.00 mm and we need to calculate its speed after it has traveled 3.00 m down the incline.

To solve this, we can use the kinematic equation for constant acceleration, which is stated as:

v^2 = u^2 + 2as

where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement.

Since the block starts from rest, u = 0. We can find the acceleration by using the given final speed and distance from the first part of the trip (6.00 mm to the bottom). We substitute the acceleration into the kinematic equation again using s as 3.00 m to find the speed at that point.

Answer:

 y = 2,645 10⁴ / m²

m=80 kg,  y = 4.13 m

Explanation:

We must solve this problem in two parts, one when it is in free fall and another for the collision with the floor

Let's start by analyzing the crash with the floor,

Initial instant When it arrives but if you start to stop

              p₀ = m v

Final moment. When he stopped

              [tex]p_{f}[/tex] = 0

The momentum is related to the moment by

            I = Δp = p_{f} –p₀

            F t = 0 - mv

            v = -F t / m

Let's calculate

             v = -18000 0.040 / m

             v = -720 / m

The sign indicates that the speed goes down

Now we use energy conservation at two points

Lowest point. Just before crashing

               Em₀ = K = ½ m v²

Highest point. From where it began to fall

               Em_{f} = U = m g y

  Energy is conserved in the fall

               Em₀ = Em_{f}

                ½ m v² = m g y

                y = ½ v² / g

               y = ½ (720 / m)² /9.8

               y = 2,645 10⁴ / m²

For an explicit height value, the object's mass must be known, suppose the masses are m = 80 kg

              y = 2,645 10⁴/80²

              y = 4.13 m

Answer:

[tex]2.7\times 10^{12}[/tex]

Explanation:

We are given that

Electric field =[tex]E=152N/C[/tex]

We have to find the ratio of magnitude of the upward electric force on an electron to the magnitude of gravitational force on the electron.

We know that

F=qE

Charge on an electron,q=[tex]1.6\times 10^{-19}C[/tex]

Using the formula

Upward electric force=[tex]152\times 1.6\times 10^{-19}[/tex] N

Upward electric force=[tex]F_e=2.43\times 10^{-17}[/tex] N

Mass of electron=[tex]m_e=9.1\times 10^{-31} kg[/tex]

[tex]g=9.8m/s^2[/tex]

Gravitational force=[tex]F=mg[/tex]

Using the formula

Gravitational force=[tex]F_g=9.1\times 10^{-31}\times 9.8=8.92\times 10^{-30} N[/tex]

Ratio of Fe to the Fg=[tex]\frac{2.43\times 10^{-17}}{8.92\times 10^{-30}}[/tex]

[tex]\frac{F_e}{F_g}=2.7\times 10^{12}[/tex]

Answer:

t= 0.0003 mm

Explanation:

Given that

mass ,m = 230 mg

m  = 0.23 g

Area ,A= 23 x 17 cm²

A= 391  cm²

Density ,ρ = 19.32 g/cm³

Lets take thinness of the sheet =  t cm

We know that

Mass = Density x Volume

m = ρ A t

Now by putting the values in the above equation we get

0.23 = 19.32 x 391 x t

[tex]t=\dfrac{0.23}{19.32\times 391}\ cm[/tex]

t=0.000030 cm

t= 0.0003 mm

That is why the thickness of the sheet will be 0.0003 mm.

Answer:

The excess charge on earth's surface was calculated to be 4.56 × 10⁵ C

Explanation:

Using the formula for an electric field;

E = kQ/r²

k = 1/(4πε₀) = 8.99 × 10⁹ Nm²/C²

E = 100N/C

r = radius of the earth = 6400 km = 6400000m

Q = Er²/k = 100 × (6400000)²/(8.99 × 10⁹)

Q = 455617.4 C = 4.56 × 10⁵ C

Hope this helps!!!

The excess charge on the surface of the earth is 4.55×10⁵C

To calculate the charge on the surface of the earth, we apply the equation of electric field strength, that is:

[tex]E = k\frac{Q}{r^2}[/tex]

here, E is the electric field strength = 100N/C (given)

k = 9×10⁹ Nm²/C²

Q is the charge, and

r = distance = radius of earth = 6.4×10⁶ m

Now,

[tex]Q = \frac{r^2E}{k}\\ \\=\frac{(6.4*10^6)^2*100}{9*10^9}\\\\Q=4.55*10^5 C[/tex] is the charge acquired on the surface of the earth.

Learn more:

https://brainly.com/question/9774180?referrer=searchResults

The seed launched at an angle of 0° will land 0 cm from the plant regardless of the initial speed because in a projectile motion, angle of 0° results in zero horizontal distance traveled.

This question can be solved by using the formulas of projectile motion. In such motion, the horizontal distance traveled by an object (range) can be calculated using the formula:

R = (v² sin(2θ))/g

where 'v' is the speed of the object, 'θ' is the angle of projection, and 'g' is the acceleration due to gravity.

Here, the launch angle is 0° and the speed is 4.6 m/s. Since the sin(2*0°) is 0, whatever the speed would be, the seed will drop straight down, having no horizontal distance traveled.

So the seed will not move horizontally and it will land 0 cm away from the plant (option not given in choices).

https://brainly.com/question/20627626

#SPJ3

To solve this problem, we can use the kinematic equations of motion. When a projectile is launched at an angle from the horizontal, we can split its initial velocity into horizontal and vertical components. Since the launch angle is 0°, the initial velocity will have only a horizontal component, and the vertical component will be zero.

Given:

Initial speed,

v 0=4.6m/s

Launch angle,

θ=0∘

Initial height,

h=20cm=0.20m

Acceleration due to gravity,

g= 9.8m/s²

First, we find the time

t it takes for the seed to hit the ground:

Since the initial vertical velocity is 0, we can use the equation:

h= 1/2gt²

Substituting the values:

0.20= 1/2×9.8×t²

0.20=4.9t²

Solving for:

t²= 4.9/0.20

t²=0.040816

t²≈0.202s

Now, we can use this time to find the horizontal distance travelled x. Since the launch angle is 0°, the horizontal velocity remains constant:

x=v₀×t

x=4.6×0.202

x≈0.9292m

So, the seed will land approximately 0.9292m away from the plant.

The closest option provided is (b) 93 cm. However, the correct value is 92.92 cm, which would round to 93 cm. Therefore, the correct answer is (b) 93 cm.

Answer:

a) 2.063*10^-4

b) 1.75*10^-4

Explanation:

Given that: d= 1.628 mm = 1.628 x 10-3 I= 12 mA = 12.0 x 10-8 A The Cross-sectional area of the wire is:  

[tex]A=\frac{\pi }{4}d^{2} \\=\frac{\pi }{4}*(1.628*10^-3 m)^2\\=2.082*10^-6 m^2\\[/tex]

a) The Potential difference across a 2.00 in length of a 14-gauge copper  

   wire:

  L= 2.00 m

From Table  Copper Resistivity [tex]p[/tex]= 1.72 x 10-8 S1 • m The Resistance of the Copper wire is:

[tex]R=\frac{pL}{A}[/tex]

   =0.0165Ω

The Potential difference across the copper wire is:  

V=IR

 =2.063*10^-4

b) The Potential difference if the wire were made of Silver: From Table: Silver Resistivity p= 1.47 x 10-8 S1 • m

The Resistance of the Silver wire is:  

[tex]R=\frac{pL}{A}[/tex]

   =0.014Ω

The Potential difference across the Silver wire is:  

V=IR

 =1.75*10^-4

Answer:

v = 0.2035 m/s

Explanation:

given,

Amplitude,A = 0.0127 m

Frequency, f = 2.55 Hz

maximum speed of the needle = ?

we know,

x = A cos ω t

velocity of the motion

v = - A ω sin ω t

for maximum speed

sin ω t = 1

v = - A ω

ω = 2 π f

now,

v =  A 2 π f

v = 0.0127 x 2 π x 2.55

v = 0.2035 m/s

Hence, the maximum speed of the needle is equal to 0.2035 m/s

Answer : The volume of the second tank is, [tex]4ft^3[/tex]

Explanation :

Boyle's Law : It is defined as the pressure of the gas is inversely proportional to the volume of the gas at constant temperature and number of moles.

[tex]P\propto \frac{1}{V}[/tex]

or,

[tex]P_1V_1=P_2V_2[/tex]

where,

[tex]P_1[/tex] = initial pressure of gas = 2 atm

[tex]P_2[/tex] = final pressure of gas = 1 atm

[tex]V_1[/tex] = initial volume of gas = [tex]2ft^3[/tex]

[tex]V_2[/tex] = final volume of gas = ?

Now put all the given values in the above equation, we get:

[tex]2atm\times 2ft^3=1atm\times V_2[/tex]

[tex]V_2=4ft^3[/tex]

Therefore, the volume of the second tank is, [tex]4ft^3[/tex]

Answer:

Interstellar dust

Explanation:

In modern solar system theory of condensation, interstellar dust, which was lacking in nebular theory, would be the essential component.Cosmic dust is dust that exists in outer space or that has fallen to earth, also called extra-terrestrial dust or spatial powder. The majority of the cosmic dust particle sizes range from a few molecules to 0.1 μm.

Answer:

[tex]t=11.1s[/tex]

Explanation:

Given data

Jet Speed v=650 m/s=1.89504 mach

height h=4500 m

Speed of the Sound V=343 m/s

To find

time t

Solution

As we know that

[tex]Vs_{Velocity}=d_{distance} /t_{time} \\d=Vs*t[/tex]

where

[tex]Vs=1.895*V[/tex]

Also from trigonometric properties we know that

[tex]tan\alpha =\frac{Perpendicular}{Base}[/tex]

We have use height h as perpendicular and distance d is base

So

[tex]tan\alpha =h/d\\tan\alpha=h*(1/Vs*t)\\t=\frac{h}{tan\alpha } \frac{1}{Vs}\\[/tex]

First we need to angle α

Since

[tex]Sin\alpha =V/Vs[/tex]

[tex]Sin\alpha =\frac{v}{1.895v}\\\alpha =32^{o}[/tex]

Substitute given values and angle to  find

[tex]t=\frac{h}{tan\alpha } \frac{1}{Vs}\\t=\frac{4500m}{tan(32) } \frac{1}{1.895*343m/s}\\t=11.1s[/tex]

Final answer:

To calculate the time for a shock wave to reach an observer on the ground, divide the altitude of the jet by the speed of sound. For a jet at 4500 m and a sound speed of 343 m/s, it will take approximately 13.12 seconds for the shock wave to reach the ground.

Explanation:

The question pertains to the time it will take for the shock wave from a jet traveling at a constant speed and altitude to reach an observer on the ground.

To calculate this, one has to consider the speed of sound and the altitude of the jet from the ground. Using Pythagoras' theorem, one can determine the distance the sound has to travel to reach the observer. Then divide the distance by the speed of sound to find the time for the shock wave to reach the ground.

Let's denote the speed of sound as v and the altitude of the jet as h. The time t it takes for the shock wave to reach the observer can be calculated using the formula:

t = h / v

As given, the jet is flying at an altitude of 4500 m (4.5 km) and the speed of sound is generally taken to be 343 m/s. Plugging these values into the formula:

t = 4500 m / 343 m/s
t approx 13.12 seconds
Therefore, it will take approximately 13.12 seconds for the shock wave to reach the observer on the ground.

Answer:

[tex]d=691.71km[/tex]

Explanation:

The time lag between the arrival of transverse waves and the arrival of the longitudinal waves is defined as:

[tex]t=\frac{d}{v_t}-\frac{d}{v_l}[/tex]

Here d is the distance at which the earthquake take place and [tex]v_t, v_l[/tex] is the velocity of the transverse waves and longitudinal waves respectively. Solving for d:

[tex]t=d(\frac{1}{v_t}-\frac{1}{v_l})\\d=\frac{t}{\frac{1}{v_t}-\frac{1}{v_l}}\\d=\frac{56.4s}{\frac{1}{5.05\frac{km}{s}}-\frac{1}{8.585\frac{km}{s}}}\\d=691.71km[/tex]

Answer:

a) 8.58 m/s upward

b) -2.211 m/s downward

Explanation:

Let gravitational acceleration g = -9.81m/s2. This is negative because it deceleration the upward motion of the key.

(a)We have the following equation of motion

[tex]s = v_0t + gt^2/2[/tex]

where [tex]v_0[/tex] is the initial upward velocity of the keys, t = 1.1s is the time it takes for the keys to travel a distance of s = 3.5 m

[tex]3.5 = v_01.1 - 9.81*1.1^2/2[/tex]

[tex]3.5 = 1.1v_0 - 5.94 [/tex]

[tex]1.1v_0 = 3.5 + 5.94 = 9.44[/tex]

[tex]v_0 = 9.44 / 1.1 = 8.58 m/s[/tex]

So the keys were thrown initially upward with a speed of 8.58 m/s

(b) If the initial velocity of the key is 8.58 m/s and it is subjected to a deceleration of 9.81m/s2 for 1.1s then the velocity right at the 1.1s instant is

[tex]v = v_0 + gt = 8.58 - 9.81*1.1 = -2.211 m/s[/tex]

So they keys would have a downward speed of 2.211 m/s

Answer:

Range will become 4 times of initial range

Explanation:

Let the velocity of projection is u

And angle at which projectile is projected is [tex]\Theta[/tex]

And acceleration due to gravity is [tex]g\ m/sec^2[/tex]

So range of projectile is equal to [tex]R=\frac{u^2sin2\Theta }{g}[/tex]........eqn 1

Now in second case it is given that velocity of launching is doubled

So new velocity [tex]u_{new}=2u[/tex]

So new range will be equal to [tex]R_{new}=\frac{(2u)^2sin2\Theta }{g}=\frac{4u^2sin2\Theta }{g}[/tex] .....eqn 2

Now dividing eqn 2 by eqn 1

[tex]\frac{R_{new}}{R}=\frac{4u^2sin2\Theta }{g}\times \frac{g}{u^2sin2\Theta }[/tex]

[tex]R_{new}=4R[/tex]

So if we double the initial launch speed then range will become 4 times

Doubling the initial launch speed while keeping the launch angle fixed quadruples the range of a projectile due to the direct proportionality between the range and the square of the initial speed, considering factors like launch angle, gravity, and air resistance.

If you keep the launch angle fixed, but double the initial launch speed, the range of a projectile will increase. When the initial speed is doubled, the range increases four times because the range is directly proportional to the square of the initial speed. This phenomenon is influenced by factors such as launch angle, gravity, and air resistance.

Answer: After rounding, the answer to equation A should have  [tex]4.290\times 10^{-19}J[/tex]

Explanation:

Significant figures : The figures in a number which express the value -the magnitude of a quantity to a specific degree of accuracy is known as significant digits.

Rules for significant figures:

Digits from 1 to 9 are always significant and have infinite number of significant figures.

All non-zero numbers are always significant.

All zero’s between integers are always significant.

All zero’s preceding the first integers are never significant.

All zero’s after the decimal point are always significant.

The rule apply for the multiplication and division is :

The least number of significant figures in any number of the problem determines the number of significant figures in the answer.

Thus for [tex]\frac{6.626\times 10^{-34}Js}{4.630\times 10^{-7}m}\times 2.9979\times 10^8m/s}=4.290299222462\times 10^{-19}J[/tex]

In this problem, 6.626 has 4 significant figures, 4.630 has 4 significant figures and 2.9979 has 5 significant digits thus product will have the least number of significant figures which is 4. So, the answer will be in 4 significant figures. Thus the answer is [tex]4.290\times 10^{-19}J[/tex]

The answer to equation A should have four significant figures, as the least precise measurement in the equation has four significant figures.

When you are calculating with measured values, the rule is that your result cannot be more precise than the least precise measurement. This means when using values in calculations, you need to look at the number of significant figures in the original measurements to determine how many significant figures to use in the final answer.

In the given equation, A: (6.626 x 10−34 J * s) (2.9979 x 108 m / s) / 4.630 x 10−7 m = 4.290299222462 x 10−19 J (unrounded), the least precise measurement is 4.630 x 10−7 m, which has four significant figures. Therefore, after rounding, the answer to equation A should also have four significant figures.

https://brainly.com/question/37022020

#SPJ6

Answer: 7 kg bowling ball must move with a speed of 2.8 m/s so that it has the same kinetic energy.

Explanation:

Kinetic energy is the energy possessed by a body by virtue of its motion.

[tex]K.E=\frac{1}{2}mv^2[/tex]

m = mass of object

v= velocity of the object

[tex]K.E=\frac{1}{2}\times 6kg\times (3m/s)^2=27Joules[/tex]

b) for a 7 kg bowl to have kinetic energy of 27 Joules:

[tex]27J=\frac{1}{2}\times 7kg\times v^2[/tex]

[tex]v^2=7.7[/tex]

[tex]v=2.8m/s[/tex]

Thus 7 kg bowling ball must move with a speed of 2.8 m/s so that it has the same kinetic energy

Answer:

a) [tex](x_2,y_2)=(-45.6,58.8)[/tex]

b) [tex]s=74.4097\ m[/tex]

Explanation:

Given:

a)

As we know that average velocity is total displacement per unit time.

Position of x-coordinate of rhino:

[tex]v_x=\frac{x_2}{t_2}[/tex]

[tex]-3.8=\frac{x_2}{12}[/tex]

[tex]x_2=-45.6\ m[/tex]

Position of y-coordinate of rhino:

[tex]v_y=\frac{y_2}{t_2}[/tex]

[tex]4.9=\frac{y_2}{12}[/tex]

[tex]y_2=58.8\ m[/tex]

b)

Now the distance from the origin:

[tex]s=\sqrt{x_2^2+y_2^2}[/tex]

[tex]s=\sqrt{(-45.6)^2+(58.8)^2}[/tex]

[tex]s=74.4097\ m[/tex]

The question concerns vector kinematics in physics. The rhinoceros's coordinates at 12 seconds are (-45.6,58.8), and its distance from the origin is approximately 74.2 meters.

The phenomenon described in your question essentially relates to Vector Kinematics. The rhinoceros is said to have a velocity in the x-direction of -3.8 m/s and in the y-direction of 4.9 m/s. These velocities are constant and last for 12 seconds.

To find the x- and y-coordinates, we can simply multiply the component velocities by time.

For the x-coordinate:
x = velocity_x * time = -3.8 m/s * 12 s = -45.6 m
And for the y-coordinate:
y = velocity_y * time = 4.9 m/s * 12 s = 58.8 m

So, for part (a) of your question, the rhino's coordinates at t2 = 12.0 s are (-45.6, 58.8).

Now, for part (b), to calculate the rhino's distance from the origin, we can use the Pythagorean theorem which is rooted in the geometrical interpretation of vectors. The distance from the origin (r) can be given by:
r = sqrt[x² + y²] = sqrt[(-45.6 m)² + (58.8 m)²] = approximately 74.2 m

Therefore, the rhino is approximately 74.2 m from the origin.

https://brainly.com/question/33396691

#SPJ3

Answer:

v = 7.5*10⁶ m/s

Explanation:

While accelerating through a potential difference of 160 V, the electron undergoes a change in the electric potential energy, as follows:

ΔUe = q*ΔV = (-e)*ΔV = (-1.6*10⁻¹⁹ C) * 160 V = -2.56*10⁻¹⁷ J (1)

Due to the principle of conservation of energy, in absence  of non-conservative forces, this change in potential energy must be equal to the change in kinetic energy, ΔK:

ΔK = Kf -K₀

As the electron accelerates from rest, K₀ =0.

⇒ΔK =Kf = [tex]\frac{1}{2}*me*vf^{2}[/tex] (2)

From (1) and (2):

ΔK = -ΔUe = 2.56*10⁻¹⁷ J = [tex]\frac{1}{2}*me*vf^{2}[/tex]

where me = mass of the electron = 9.1*10⁻³¹ kg.

Solving for vf:

[tex]vf =\sqrt{\frac{2*(2.56e-17J)}{9.1e-31kg} } =7.5e6 m/s[/tex]

⇒ vf = 7.5*10⁶ m/s

Final answer:

The speed of an electron after accelerating from rest through a potential difference of 160 V can be calculated using the conservation of energy principle, resulting in a velocity of approximately 5.93 × 10^6 m/s.

Explanation:

To calculate the speed of an electron after it accelerates from rest through a potential difference, we use the concept of conservation of energy where the electrical potential energy converted into kinetic energy is expressed as qAV = ½mv². Here, q is the charge of the electron (-1.60 × 10^-19 C), V is the potential difference (160 V), m is the mass of the electron (9.11 × 10^-13 kg), and v is the velocity of the electron we need to find. Rearranging the equation to solve for v and substituting the given values gives:

v = sqrt(2 × q × V / m) = √(2 × (-1.60 × 10^-19 C) × 160 V / (9.11 × 10^-13kg))

Performing the calculation yields a velocity of approximately 5.93 × 10^6 m/s.

Answer:

(b) the point charge is moved outside the sphere

Explanation:

Gauss' Law states that the electric flux of a closed surface is equal to the enclosed charge divided by permittivity of the medium.

[tex]\int\vec{E}d\vec{a} = \frac{Q_{enc}}{\epsilon_0}[/tex]

According to this law, any charge outside the surface has no effect at all. Therefore (a) is not correct.

If the point charge is moved off the center, the points on the surface close to the charge will have higher flux and the points further away from the charge will have lesser flux. But as a result, the total flux will not change, because the enclosed charge is the same.

Therefore, (c) and (d) is not correct, because the enclosed charge is unchanged.

Explanation:

Exothermic reaction is defined as the reaction in which release of heat takes place. This also means that in an exothermic reaction, bond energies of reactants is less than the bond energies of products.

Hence, difference between the energies between the reactants and products releases as heat and therefore, enthalpy of the system will decrease.

Whereas in an endothermic reaction, heat is supplied from outside and absorbed by the reactant molecules. Hence, enthalpy of the system increases.

As water acts as a coolent and when fuel rods in a nuclear reactor are immersed in it then heat created by coolent is absorbed by water and then it changes into steam.

Since, absorption of heat occurs in the nuclear reactor. Therefore, it is an endothermic reaction.

Thus, we can conclude that nuclear reactors use fuel rods to heat water and generate steam. This process is endothermic.

Answer:

The heat produced by the nuclear reactor is an exothermic process while the heat absorbed by the water to convert into steam is an endothermic process.

Explanation:

Nuclear reactor being the heat of a nuclear power plant uses the radioactive uranium fuel to generate the heat by the process of nuclear fission in a controlled manner.

The processing of uranium is carried out into small ceramic pellets which are stacked together into sealed metal tubes known as fuel rods.

Usually more than 200 such rods are bunched together leading to the formation of a fuel assembly.

The core of the reactor is often made up of a couple hundred assemblies, according to its power level.

Inside the reactor vessel, these fuel rods are immersed into water which serve as both a coolant and moderator. The moderator helps slow down the neutrons produced by fission to sustain the chain reaction.