Answer: The minimum force by which player should hit the puck to move it is 0.102 N.
Explanation:
Weight of the puck = 1.70 N
This weight of the puck is the force acting normal to the surface that is:
N = 1.70 N
The coefficient of friction =
Frictional force =
The minimum force by which player should hit the puck to move it is 0.102 N.
Read more on Brainly.com - https://brainly.com/question/9177221#readmore
Answer:
F=10.2N : Force with which the player must push the disc
Explanation:
Conceptual analysis
We apply Newton's first law because the speed is constant in horizontal direction (x):
∑Fx = 0 Formula (1)
We apply Newton's first law because the speed is zero in vertical direction (y):
∑Fy= 0 Formula (2)
∑F: algebraic sum of forces in Newton (N)
We calculate the friction force with the following formula:
Ff=f*N Formula (3)
Ff= friction force in Newtons (N)
f = coefficient of friction
N= Normal force in Newtons (N)
Known data:
Wp = 170 N : puck weight
f = 0.0600 :coefficient of friction
Problem development
We replace the data in formula (1) and (2), considering that the force is positive (+) if it goes in the direction of the movement and negative (-) if it opposes the movement:
∑Fy= 0
N-Wp=0
N= Wp=170 N
∑Fx =0
F - Ff=0 F :force with which the player must push the disc
F - 0.0600*170 =0
F=10.2N
2 Points
Which of the following could be vector magnitudes?
A. 30 m/s
B. 15 hours
O
C. 25 milliliters
D. 15 kilometers
SUBMIT
Answer:
A. 30 m/s
D. 15 kilometers
Explanation:
Vector quantities have both magnitude and direction. Among the provided choices, B and C are scalar quantities as they have no direction.
30 m/s is the magnitude for velocity, a derivative of displacement.
15 kilometers is the metric magnitude (10³m) for displacement.
A 110-pound person pulls herself up 4.0 feet. This took her 2.5 seconds. How much power was developed?
0.13 hp
0.32 hp
2.0 hp
3.1 hp
Answer:
0.32 Hp is the answer. right
Answer: Power developed by her is 0.32 hp
Explanation:
Work done , W= Force(F) X Displacement (d) in the direction of force
Thus work done , [tex]W=Fd=110\times 4.0 ft-lbf = 440 ft-lbf[/tex]
Now 1.0 ft-lbf = 1.355 joules of energy
Therefore , work done, W= 440x 1.355 J = 596.2 J
Average Power , [tex]P=\frac{work done(W)}{time (t)}[/tex]
=> [tex]P=\frac{596.2}{2.5} watts = 238.5 watts[/tex]
We know 746 hp = 1.0 watts
=> [tex]P=\frac{238.5}{746} hp=0.32 hp[/tex]
Thus average power developed by her is 0.32 hp
What is the momentum of a 5 kg object that has a velocity of 1.2 m/s? 3.8 kg • m/s 4.2 kg • m/s 6.0 kg • m/s 6.2 kg • m/s
Answer:
Your answer will be 6.0kg•m/s
Explanation:
In the given question all the required details d given. Using these information's a person can easily find the momentum of the object. In the question it is already given that the mass of the object is 5 kg and the velocity at which it is traveling is 1.2 m/s.We know the equation of finding momentum asMomentum = mass * velocity = 5 * 1.2 = 6So the momentum of the object is 6 Newton.
Answer:
Momentum of an object, p = 6 kg-m/s
Explanation:
It is given that,
Mass of an object, m = 5 kg
Velocity of that object, v = 1.2 m/s
We need to find the momentum of an object. It is equal to the product of mass and its velocity. Mathematically, it is given by :
p = m v
[tex]p=5\ kg\times 1.2\ m/s[/tex]
p = 6 kg-m/s
So, the momentum of an object is 6 kg-m/s. Hence, this is the required solution.
When you enter a pool of water, you feel as though you weigh less. What
causes this apparent change of weight?
A. Buoyant force
B. Cohesive force
C. Adhesive force
D. Pressure
Answer:
Buoyant force.
Explanation:
When we are immersed in a pool of water, we experiences a force pushing us in upward direction due to which our weight is decreased and this force is called Buoyant force.
This is also called upthrust.
Answer: Buoyant force
Explanation:
Acid rain is a secondary pollutant.
T or F
Answer: True
Explanation:
edgen 2022
Estimate of the number of stars in our galaxy
Answer:
About 250 billion stars are in the Milky-way Galaxy
Glands that are responsible for lubricating the skin and minimizing water loss are called
Answer:
your answer would be Sebaceous glands
Explanation:
these glands secrete oil/wax called sebum to lubricate and waterproof your skin. Hope this helps :)
"The correct term for the glands responsible for lubricating the skin and minimizing water loss is sebaceous glands.
The skin has several types of glands, each with a specific function. Sebaceous glands are the glands that produce sebum, an oily substance that lubricates the skin and hair. Sebum helps to form a protective layer on the skin's surface, which serves multiple purposes:
1. It prevents the skin from drying out by reducing water loss through the epidermis, which is the outermost layer of the skin.
2. It provides a barrier against foreign pathogens and substances, helping to protect the skin from infections.
3. It contributes to the skin's flexibility and suppleness.
These glands are located all over the body, except for the palms of the hands and the soles of the feet, and are usually associated with hair follicles. The secretion of sebum is an essential process for maintaining healthy skin and hair.
In summary, sebaceous glands play a crucial role in skin health by secreting sebum, which lubricates and waterproofs the skin, thereby minimizing water loss and protecting against external threats."
The coefficient of static friction between car's tires and a level road is 0.80 If car to be stopped in time of 3.0 sec its speed is
Answer:
23.5 m/s
Explanation:
The velocity of the car in decelerated motion is given by
v = u + at
where
v = 0 is the final velocity
u is the initial velocity
a is the acceleration of the car
t = 3.0 s is the time it takes for the car to stop
The acceleration of the car is given by the frictional force, which is the only force acting on the car along the direction of motion, so:
[tex]ma = -\mu mg\\a = -\mu g = -(0.80)(9.8 m/s^2)=-7.84 m/s^2[/tex]
where
[tex]\mu=0.80[/tex] is the coefficient of friction
Solving the previous equation for u, we find the initial velocity:
[tex]u=v-at=0-(-7.84 m/s^2)(3.0 s)=23.5 m/s[/tex]
Kinetic energy is the energy an object has as a result of its
Answer:
as a result of its motion
Explanation:
Explanation:
The kinetic energy of an object is given by due to its motion. Mathematically, it is given by :
[tex]E_k=\dfrac{1}{2}\times m\times v^2[/tex]
Where
m = mass of an object
v = velocity
The kinetic energy of an object depends on its mass and the velocity with which it is moving. So, basically kinetic energy of an object depends on its motion.
A good hypothesis must be which of the following
Answer:
Testable
Explanation:
A good hypothesis must always be testable.
Answer:
Must be testable and falsifiable
when a book falls from a shelf to the ground without anyone pushing on it, no work is done on the book. true or false
Answer:
False
Explanation:
Gravity and impact puts a toll on it.
In which source of water would a wave travel the fastest? A) ice B)cold C) room temperature D) hot
Answer:hot
Explanation:
Ice don’t move at all. cold makes it move slowly. Room temperature it’s ok it might be kinda fast but hot water moves fastest.
Answer: Option (D) is the correct answer.
Explanation:
In a hot source, molecules will have more kinetic energy. As a result, they tend to move randomly and at a rapid rate from their initial position.
So, when a wave travels through hot source then vibrations caused by it will also move at a faster rate due to high kinetic energy in the molecules of the source.
Whereas in ice or cold source molecules have very less kinetic energy. As a result, these molecules will be held much more closer to each other.
So, when a wave travels through it then it will find difficulty to pass through the molecules as they are held closer to each other due to which there is very less or no vacant space for the wave to pass on from one end to another.
At room temperature, a wave will travel less fast as compared to wave in a hot source.
Thus, we can conclude that in hot source of water would a wave travel the fastest.
What happens when a rubber balloon is rubbed against wool and gains electrons?
A. A positive charged is induced on the balloon and the wool acquires a negative charge.
B. A negative charged is induced on the balloon and the wool acquires a positive charge.
C. The balloon and the wool both become positively charged.
D. The balloon and the wool both become negatively charged.
Answer:
A negative charged is induced on the balloon and the wool acquires a positive charge.
Explanation:
It gains negative electrons, therefore becoming negatively charged.
As charge cannot be created, nor destroyed, only transferred, this leaves the wool positive.
Option B. A negative charge is induced on the balloon and the wool acquires a positive charge.
They stick to each other.
It gains negative electrons, therefore becoming negatively charged.
A charge cannot be created, nor destroyed, only transferred, this leaves the wool positive.
Now that they have opposite charges, the two items attract.
What are 3 facts about electrons?Electrons are found free in nature (free electrons) and bound within atoms. Electrons are responsible for the negatively-charged component of an atom. In an atom, electrons orbit around the positively-charged atomic nucleus. In solids, electrons are the primary means of conducting current.
Learn more about electrons at
https://brainly.com/question/23390564
#SPJ2
PLEASE HURRY!
how much heat is absorbed by a 72g iron skillet when its temperature rises from 11°c to 23°c?
Convection occurs when thermal energy is transferred by the movement of _______
Answer:
Convection occurs when thermal energy is transferred by the movement of fluid particles.
Explanation:
Transfer of heat energy by the movement of fluid particles is called convection. Convection takes place in liquids and gases due to kinetic energy. When heat is provided to liquids and gases they expand and move faster.
Molecules with higher kinetic energy become less dense and rise up to the surface of liquid, whereas molecules with lower energy move towards the bottom. This up and down movement of molecules causes convection currents in fluids.
Answer:
Convection occurs when thermal energy is transferred by the movement of fluids.
Explanation:
Convection is one of the three forms of heat transfer (conduction, convection and radiation) that transports heat between zones with different temperatures. Convection itself is the transport of heat through the movement of fluid. For example, when heating water in a saucepan, the water in contact with the base of the pan rises, while the water from the surface descends and occupies the place left by the hot one.
the turning effect of force is called
The answer is torque.
The turning effect of force is torque.
Answer:
The turning effect of force is called Torque
A boat has a mass of 20 kg and will carry 110 kg of passengers across a pool. If 50% of the boat is submerged, what is the total volume of the boat?
Answer:
0.26 m³
Explanation:
There are three forces on the boat: weight of the boat, weight of the passengers, and buoyancy.
∑F = ma
B - mg - Mg = 0
Buoyant force is equal to the weight of the fluid displaced.
ρVg - mg - Mg = 0
ρV - m - M = 0
V = (m + M) / ρ
Given m = 20 kg, M = 110 kg, and ρ = 1000 kg/m³:
V = (20 + 110) / 1000
V = 0.13 m³
Since this is half of the boat's volume, the total volume is 0.26 m³.
The total volume of the boat is 0.0265 cubic meters.
What is Archimedes' principle?Archimedes' principle, which states that the buoyant force on an object immersed in a fluid is equal to the weight of the fluid displaced by the object.
Here in the Question,
Let's begin by finding the weight of the water displaced by the submerged part of the boat. Since we know that 50% of the boat is submerged, we can assume that the volume of water displaced is equal to half of the volume of the boat.
The weight of the water displaced can be found using the density of water, which is 1000 kg/m³. The formula for the weight of water displaced is:
Weight of water displaced = density of water x volume of water displaced x gravitational acceleration
where gravitational acceleration is 9.8 m/s².
Let V be the total volume of the boat. Then, the volume of water displaced is V/2, since 50% of the boat is submerged.
The weight of the boat is 20 kg, and the weight of the passengers is 110 kg. Therefore, the total weight of the boat and passengers is:
Total weight = weight of boat + weight of passengers
Total weight = 20 kg + 110 kg
Total weight = 130 kg
Now we can use Archimedes' principle to find the buoyant force on the boat:
Buoyant force = weight of water displaced = density of water x V/2 x gravitational acceleration
The buoyant force must be equal to the weight of the boat and passengers for the boat to float, so we have:
Buoyant force = Total weight
Substituting the values we have found, we get:
density of water x V/2 x gravitational acceleration = 130 kg x gravitational acceleration
Simplifying and solving for V, we get:
V = 130 kg / (density of water x 9.8 m/s² x 0.5)
Substituting the value of the density of water, we get:
V = 130 kg / (1000 kg/m³ x 9.8 m/s² x 0.5)
V = 0.0265 m³
Therefore, the total volume of the boat is approximately 0.0265 cubic meters.
To learn more about the buoyant force click:
https://brainly.com/question/21990136
#SPJ3
26. A 40 kg boy jumps from a height of 4m onto a plate-form mounted on springs. As the
spring compress, the plate-form is pushed down a maximum distance of 0.2 cm below its
initial position, and it then rebounds. What is the loss in potential energy by the boy?
a. 800J
b. 1080J
c. 1600J
d. 1680 J
Answer:
c. 1600J
Explanation:
The loss in potential energy of the boy is given by:
[tex]U=mg \Delta h[/tex]
where
m = 40 kg is the mass of the boy
g = 9.8 m/s^2 is the acceleration of gravity
[tex]\Delta h = 4 m + 0.02 m = 4.02 m[/tex] is the total change in the height of the boy (4 metres + 2 cm due to the compression of the spring)
Substituting, we find
[tex]\Delta U = (40 kg)(9.8 m/s^2)(4.02 m) = 1577 J \sim 1600 J[/tex]
Read about Pendulums. Then complete the sentences based on the diagram of the pendulum. Be sure to keep this
article open because there will be several questions related to it.
The pendulum has the most potential energy
The pendulum has the least kinetic energy
The pendulum has the most kinetic energy at the top of swing
The pendulum has the least potential energy
Answer:
1. at the top of swing 2. at the top of swing 3. at the bottom of swing 4.at the bottom of swing
Explanation:
Answer:
The pendulum has the most potential energy at the top of swing.
The pendulum has the least kinetic energy at the top of swing.
The pendulum has the most kinetic energy at the bottom of swing.
The pendulum has the least potential energy at the bottom of swing.
What is the primary force that helps suspension bridges use cables to hold their spans up? A. tension force B. resistance force C. normal force D. elastic force E. applied force
Answer:
A. Tension force
Explanation:
These are bridges that use cables to hold the road way up.
The cables in a suspension bridge receive the tension force of the bridge. These cables transmit these forces to the towers supporting the bridge and are compressed into the ground.
Answer:
The correct answer is option A. "tension force".
Explanation:
Suspension bridges, like the Golden Gate Bridge or the Brooklyn Bridge, use tension force as the primary source of force that cables use to hold their spans up. The supporting cables receive the tension forces of the bridge, and this same force passes to the anchorages and into the ground. This equilibrium that the tension force gives among the different elements of the bridge, gives the support to hold the bridge together.
Francois places a ring made of an unknown metal into a graduated cylinder.
The water level in the graduated cylinder rises from 10.0 cm to 11.5 cm. He
has already found that the mass of the ring is 16.5 g. What is the density of
the ring?
O A. 1.7 g/cm
O B. 0.09 g/cm3
O C. 11.0 g/cm
O D. 1.4 g/cm3
The density of the ring is calculated by dividing its mass (16.5 g) by its volume (1.5 cm^3). The resulting density is 11.0 g/cm^3.
Explanation:The density of an object can be calculated by dividing its mass by its volume, according to the formula Density = Mass/Volume. In this case, Francois found the mass of the ring is 16.5 g. The volume can be determined by the displacement of water in the graduated cylinder, which is 11.5 cm - 10.0 cm = 1.5 cm3. Now we can calculate the density using the given values: Density = 16.5 g / 1.5 cm3 = 11.0 g/cm3. So, the option C, 11.0 g/cm is the correct answer.
Learn more about Density here:https://brainly.com/question/29775886
#SPJ3
The voltage in a lightbulb is given by the equation V= IR. In this equation, Vis
the voltage, lis the current, and Ris the resistance. What is the current in a
lightbulb with a voltage of 35.0 V and a resistance of 175 n?
O A. 6125 A
O B. 1.40 A
O C. 0.200 A
O D. 5.00 a
V=IR
35=I(175)
*Divide both sides by 175*
0.2=I
C. 0.200 A
Hope this helps!!
The current in a lightbulb with a voltage of 35.0 V and a resistance of 175 ohm is 0.2 A.
Find the current in a lightbulb?Given:
The voltage in a lightbulb is given by the equation V=IR V is the voltage, I is current, and R is the resistance.The voltage of the lightbulb is given as 35.0 V.The resistance of the lightbulb is given as 175 Ohm.As the equation is given,
V= IR
where I is current, R is resistance and V is the voltage.
Now, I = V/R
As the value of Voltage and resistance of the lightbulb is given, we will put in the above equation, we get;
I = 35.0/ 175 A
I = 0.2 A.
Hence, the current of the lightbulb is 0.2 A.
Therefore, Option C is the correct answer.
To learn more about Current, refer to:
https://brainly.com/question/13562393
#SPJ2
Match the following terms,
1. heat engine
2. heat pump
3. Boiler
4. Thermostat
•a machine that converts the internal energy of a fuel into mechanical energy.
•an appliance that extracts heat energy from one source and deposits it
elsewhere.
•an appliance that controls the maintenance temperature of a heating
system.
•a heating appliance that uses heat energy released from fossil fuels to warm water for use in radiant or
convection heating systems.
Answer:
1. heat engine ~~ •a machine that converts the internal energy of a fuel into mechanical energy.
2. heat pump ~~ •an appliance that extracts heat energy from one source and deposits it
elsewhere.
3. Boiler ~~ •a heating appliance that uses heat energy released from fossil fuels to warm water for use in radiant or
convection heating systems.
4. Thermostat ~~ •an appliance that controls the maintenance temperature of a heating
system
Final answer:
Heat engine is a machine converting internal energy to mechanical energy; a heat pump moves heat from cool to warm areas; a boiler heats water with fossil fuel energy; and a thermostat maintains temperature in heating systems.
Explanation:
To answer your question of matching each term with the correct definition:
Heat engine – This is a machine that converts the internal energy of a fuel into mechanical energy. Example devices include gasoline and diesel engines, jet engines, and steam turbines that generate electricity.Heat pump – This is an appliance that extracts heat energy from one source and deposits it elsewhere. This device typically moves heat from a cooler area to a warmer area, working against the natural direction of heat flow.Boiler – This is a heating appliance that uses heat energy released from fossil fuels to warm water for use in radiant or convection heating systems. It is a crucial part of many heating systems.Thermostat – This is an appliance that controls the maintenance temperature of a heating system. It regulates the heat output by turning the system on and off to maintain a set temperature.Which of the following describes an electric motor?
Check all that apply.
A.) Changes electric energy to mechanical energy.
B.) Can be powered by a hand crank.
C.) Uses the interaction between a spinning coil of wire and magnet.
D.) Is found in many appliances with moving parts, like a vacuum cleaner or a blender.
An electric motor changes electrical energy into mechanical energy, often found in household appliances like vacuum cleaners or blenders. They use the interaction between a spinning coil of wire and a magnet.
Explanation:An electric motor is a device that transforms electrical energy into mechanical energy. This is accomplished through the interaction between a spinning coil of wire and a magnet, a mechanism called electromagnetic induction. Many common appliances with moving parts, such as vacuum cleaners or blenders, contain electric motors in their design to facilitate desired functionalities, such as rotation or movement.
Option B, which suggests an electric motor can be powered by a hand crank, is incorrect. This describes a manual or mechanical system, not an electric motor.
Learn more about Electric Motor here:https://brainly.com/question/30033576
#SPJ3
Electric motors convert electrical energy into mechanical energy through magnetic interactions.
Electric motors are devices that convert electrical energy into mechanical energy. They operate based on the interaction of magnetic fields and current-carrying conductors, generating force to produce motion. Electric motors are commonly found in various applications like industrial fans, household appliances, power tools, and more.
battery of 12v is connected two series combination of restisator 3 ohm law 4 ohm law 5 ohm law how much current would flow through 12 ohm law resistance
Answer:
1 A
Explanation:
The total resistance of a circit in series is the added amount of individual resistants which is 3+4+5=12 ohms
According to Ohms's law, V=IR
V=voltage
I=current
R=resistance
12=12I
I=1 A
The current flowing through the 12 ohm resistor is 1 ampere.
Explanation:To find the current flowing through the 12 ohm resistor, we need to first find the equivalent resistance of the series combination of resistors.
The total resistance (Rtotal) is calculated by adding the individual resistances (R1, R2, R3) in the series combination:
Rtotal = R1 + R2 + R3
Substituting the given values:
Rtotal = 3 ohms + 4 ohms + 5 ohms = 12 ohms
Using Ohm's law, we can calculate the current (I) flowing through the 12 ohm resistor:
I = V / Rtotal
Substituting the given voltage (V = 12V):
I = 12V / 12 ohms = 1 ampere (A)
Therefore, the current flowing through the 12 ohm resistor is 1 ampere.
friction removes energy from objects in motion. Which statement best describes how this works?
a) friction transforms KE into thermal energy
b) friction transfers thermal energy to KE
c) friction transforms TE into PE
d) friction transforms PE into KE
e) friction transfers KE into PE
friction transforms KE into thermal energy (a)
That's why, if it goes on long enough, the moving object actually gets warm.
The correct answer is: a) friction transforms KE into thermal energy.Friction opposes motion by converting kinetic energy into thermal energy. This conversion can be observed through the generation of heat.
Friction is a force that opposes the motion of objects. It transforms the kinetic energy (KE) of an object into thermal energy.This can be observed when you rub your hands together, converting mechanical energy into heat.Thus, the correct answer is: a) friction transforms KE into thermal energy.
What happens when an atom gives up loosely held valence electrons to another atom
Answer:
The number of valence electrons increases to 8 or, the atom gives up loosely held valence electrons.
Explanation:
Please mark brainliest and have a great day!
A combination reaction is when two or more _____ combine to form one product. A decomposition reaction is when a substance breaks down into two or more simpler substances in a chemical reaction.
Answer:
elements
Explanation:
Answer:
Reactants
Explanation:
A combination reaction is usually defined as a type of chemical reaction in which two or more reactants are fused together to form a single product. For example, The two elements Hydrogen and Chlorine are linked together to form Hydrochloric acid.
This can be written as,
H + Cl -----> HCl (acid)
A decomposition reaction is usually defined as a type of chemical reaction in which a single and complex substance is disintegrated into two or more simple substances. For example, the same above reaction can be disintegrated into-
HCl (acid) ------> H + Cl
What happens when Chlorine reacts with Bromine?
A. Electrons move from the Chlorine atoms to the Bromine atoms.
B. Electrons move from the Bromine atoms to the Chlorine atoms.
C. Electrons are shared between the Chlorine atoms and the Bromine atoms.
D. Electrons become delocalized among the atoms.
Chlorine and bromine would likely share electrons to form a covalent bond, not a common reaction. Answer C is correct, as halogens generally share electrons when bonded together.
Explanation:When chlorine reacts with bromine, the outcome depends on the specific conditions of the reaction, such as the presence of other substances and the reaction environment. However, chlorine and bromine are both halogens, and a reaction between them is not typical because they are both nonmetals with high electronegativity. Chlorine is more electronegative than bromine, but not enough to draw electrons away from bromine to form an ionic bond. Instead, if they were to react directly, they would most likely form a covalent bond where electrons are shared between the atoms. Therefore, the most applicable answer to this particular multiple-choice question would be, "C. Electrons are shared between the Chlorine atoms and the Bromine atoms."
It's important to note that this type of reaction isn't common, and the halogens more typically form compounds with metals, where a metal donates electrons to the halogen, as in the formation of ionic bonds such as sodium chloride (NaCl). An example of such electron transfer is seen when sodium (Na), which has a low ionization potential, reacts with chlorine (Cl), which has a high electron affinity, resulting in the chlorine atom gaining an electron and sodium donating one.
Cereal plants gain chemical potential energy as they grow. Which form of energy is converted to create the chemical potential energy?
The plant absorbs the sunlight which serves as source of energy for the plant. Therefore, the form of energy which gets converted to “chemical potential energy is the solar energy”.
Explanation:
In process of photosynthesis, the plant makes the food and release oxygen, this occurs only in presence of solar energy that is sunlight. Therefore, the source of energy for the plants are sunlight which provides solar energy which is used up in energy conversion through various process.
The end product of the energy resource is the conversion to chemical potential energy gained over the growth of the cereal plants.