(A) If an atom of uranium-238( U ) undergoes alpha decay, what daughter isotope is produced? (B) If this radioisotope from (A) then undergoes beta decay, what new daughter isotope is produced. Show your reasoning and be sure to identify the name of the daughter isotopes. Use the image to the periodic table below to identify the daughter isotopes

The statement 'For every action there is an equal and opposite reaction' is true as per Newton's third law. This law indicates that any force exerted on a body will lead to an equivalent counter force from that body. These forces apply to separate bodies and do not cancel each other out.

The statement 'For every action there is an equal and opposite reaction' is True. This principle is known as Newton's third law. As per this law, any force enacted upon a body will cause that body to exert an equivalent force in the opposite direction - an 'action-reaction' pair. For instance, if you push a wall, the wall pushes back with an equivalent force. Importantly, these forces act on separate bodies and therefore do not cancel each other out.

https://brainly.com/question/35917326

#SPJ3

Newton's third law states that for every action, there is an equal and opposite reaction. Understanding this law is crucial in physics for analyzing interactions between objects and systems to predict motion based on forces.

Newton's third law states that for every action, there is an equal and opposite reaction. This means that when one object exerts a force on another object, the second object will exert a force of equal magnitude but in the opposite direction.

This law explains the concept of action-reaction pairs, where the forces between two interacting objects are always equal and opposite. An example of this is when you push against a wall, the wall pushes back with an equal force in the opposite direction.

Understanding Newton's third law is essential in physics to analyze the interactions between objects and systems and to predict their motion based on the forces involved.

static electricity and friction

Answer:

In a transformer, if the secondary coil contains more loops than the primary coil, then it is a step-up transformer.

Explanation:

Answer:

There are two correct options.

1. A transformer is used to increase or decrease an alternating current voltage.

2. In a transformer, if the secondary coil contains more loops than the primary coil, then it is a step-up transformer.

Explanation:

A transformer is a device which has two coils. One is primary coil and other is secondary coil.

Input is given to primary coil and output is taken out from secondary coil.

A transformer can increase or decrease the output voltage by setting the number of turns in primary and secondary coil.

If the number of turns in primary coil is less than the number of turns in secondary coil, then it is step up transformer. It increases the output voltage.

The relation between the number of turns and the voltage is given by

[tex]\frac{N_{s}}{N_{p}}=\frac{V_{s}}{V_{p}}=\frac{I_{p}}{I_{s}}[/tex]

Where, Np = number of turns in primary coil

Ns = number of turns in secondary coil

Vp = ac voltage across primary coil

Vs = ac voltage across secondary coil

Ip = ac current across primary coil

Is = ac current across secondary coil

Answer:

a

Explanation:

yes it is just like a sonar ping can cancel another ping it works the same way as a normal soundwave

hope this helps you

The correct answer is B) the combined mass of two particles is completely transformed into energy (photons).

Answer:

The word "gravity" refers to the force that pulls an object to another object. More specifically, it is the force that the Earth or another heavenly body exerts on people or objects, pulling them toward it.

Explanation:

hope this helps mark me brainliest

Answer:

20.The first factor is the amount of charge on each object. The greater the charge, the greater the electric force. The second factor is the distance between the charges. The closer together the charges are, the greater the electric force is

Explanation:

Answer:

0.0129 V

Explanation:

The average emf induced in the coil is given by Faraday-Newmann-Lenz:

[tex]\epsilon=-\frac{\Delta \Phi_B}{\Delta t}[/tex]

where

[tex]\Delta \Phi_B[/tex] is the variation of magnetic flux through the coil

[tex]\Delta t = 15 s[/tex] is the time interval

Here we have

B = 0.50 T is the strength of the magnetic field

The radius of the coil is

r = 35 cm = 0.35 m

So the area is

[tex]A=\pi r^2 = \pi (0.35 m)^2=0.385 m^2[/tex]

The initial flux through the coil is

[tex]\Phi_i = BA = (0.50 T)(0.385 m^2)=0.193 Wb[/tex]

while the final flux is zero, since the coil has been completely removed from the magnetic field region; so, the variation of magnetic flux is

[tex]\Delta \Phi = \Phi_f - \Phi_i = -0.193 Wb[/tex]

and so, the average emf induced is

[tex]\epsilon=-\frac{-0.193 Wb}{15 s}=0.0129 V[/tex]

They have different amount of neutrons

Answer:

They have different amounts of neutrons.  They have different mass numbers.

Answer:

Let's start by explaining that each atom in its natural state has a specific structure of its energy levels. Where the lowest energy level is called the ground state.

At this level, as long as no energy is communicated to the atom, the electron will remain in the ground state.

What does this mean?

When an atom is in its ground state, its electrons fill the lower energy orbitals completely before they begin to occupy higher energy orbitals.

(a) The total energy increases by a factor 4

The total energy of a simple harmonic system is given by:

[tex]E=\frac{1}{2}kA^2[/tex]

where

k is the spring constant

A is the amplitude of the motion

In this part of the problem, the amplitude is doubled:

A' = 2A

So the new total energy is

[tex]E=\frac{1}{2}k(A')^2=\frac{1}{2}k(2A)^2=4(\frac{1}{2}kA^2)=4E[/tex]

So, the energy quadruples.

(b) The maximum speed increases by a factor 2

The maximum speed in a simple harmonic motion is given by

[tex]v=\omega A[/tex]

where

[tex]\omega=\sqrt{\frac{k}{m}}[/tex] is the angular frequency, with k being the spring constant and m the mass

A is the amplitude

In this part of the problem, k and m do not change, so the angular frequency does not change. Instead, the amplitude is doubled:

A' = 2A

So the new maximum speed is

[tex]v'=\omega (A')=\omega (2A)=2 (\omega A)=2 v[/tex]

so, the maximum speed doubles.

(c) The maximum acceleration increases by a factor 2

The maximum acceleration in a simple harmonic motion is given by

[tex]a=\omega^2 A[/tex]

where

[tex]\omega=\sqrt{\frac{k}{m}}[/tex] is the angular frequency, with k being the spring constant and m the mass

A is the amplitude

In this part of the problem, k and m do not change, so the angular frequency does not change. Instead, the amplitude is doubled:

A' = 2A

So the new maximum acceleration is

[tex]a'=\omega^2 (A')=\omega^2 (2A)=2 (\omega^2 A)=2 a[/tex]

so, the maximum acceleration doubles.

(d) The period does not change

The period in a simple harmonic motion is given by

[tex]T=2\pi \sqrt{\frac{m}{k}}[/tex]

where m is the mass and k is the spring constant.

In this problem, the amplitude is doubled:

A' = 2A

However, we notice that the period does not depend on the amplitude, and since both m and k do not change, then the period will remain constant.

Final answer:

Doubling the amplitude in simple harmonic motion quadruples the total energy, doubles both the maximum speed and maximum acceleration, while the period remains unchanged. If the spring constant is doubled, the mass must be doubled to keep the same frequency.

Explanation:

Impact of Doubling the Amplitude on Simple Harmonic Motion

When the amplitude A of a system undergoing simple harmonic motion (SHM) is doubled, the following changes occur:

(a) Total energy of the system, which includes both kinetic and potential energy, is proportional to the square of the amplitude. Therefore, doubling the amplitude results in quadrupling the total energy (a factor of 4).

(b) Maximum speed (Vmax) of the system in SHM is directly proportional to the amplitude. As a result, doubling the amplitude doubles the maximum speed (a factor of 2).

(c) Maximum acceleration is also directly proportional to the amplitude. By doubling the amplitude, the maximum acceleration is also doubled (a factor of 2).

(d) The period of oscillation (T) is independent of the amplitude and will remain unchanged.

If the spring constant (k) of a simple harmonic oscillator is doubled, the mass (m) of the system needs to be doubled as well, in order to maintain the same frequency of motion, based on the formula for the frequency f = 1/(2π√(m/k)).

Answer:

0.122 m

Explanation:

We can imagine the hotspots in the microwave oven to correspond to the crests of the waves, so the distance between two hotspot is just the wavelength of the waves.

The wavelenght of an electromagnetic wave is given by

[tex]\lambda=\frac{c}{f}[/tex]

where

[tex]c=3.0\cdot 10^8 m/s[/tex] is the speed of light

f is the frequency of the wave. In this case,

[tex]f=2.45 GHz = 2.45 \cdot 10^9 Hz[/tex]

so the wavelength is

[tex]\lambda=\frac{3\cdot 10^8 m/s}{2.45\cdot 10^9 Hz}=0.122 m[/tex]

The separation between hotspots in a 2.45 GHz microwave oven is approximately half the wavelength of the microwaves, which is around 6.1 cm. This distance is derived from the speed of light and the frequency of the microwaves used.

The separation between hotspots in a microwave oven can be determined by understanding the wavelength of the microwaves used, which for most household microwave ovens is set at a frequency of 2.45 GHz. When these microwaves are generated within the oven, they reflect off the interior walls, creating standing waves. At points where the crests or troughs of these microwaves align, hotspots are formed due to the concentration of energy.

This heating effect occurs because microwaves at a frequency of 2.45 GHz have the right amount of energy to cause polar molecules, like water, to rotate, thereby transferring kinetic energy into thermal energy. The dipole nature of water molecules allows for efficient energy transfer, specifically heating the areas where these molecules are present, such as in food.

To find the separation between the hotspots, we use the relationship between the speed of light (c), frequency (f), and wavelength (λ) given by c = λ * f. With c being approximately 3 x 108 meters per second and f being 2.45 GHz, we can calculate the wavelength and thus the distance between hotspots. The speed of the microwaves is the speed of light, and so the wavelength (λ) for 2.45 GHz radiation would be about 0.122 meters (12.2 cm), hence the hotspots would be separated by approximately half a wavelength, around 6.1 cm.

https://brainly.com/question/12629843

#SPJ12

For instance, in an alkaline battery, the anode is typically made of zinc, and manganese dioxide acts as the cathode. And the electrolyte between and inside those electrodes contains ions. ... These free electrons congregate inside the anode (the bottom, flat part of an alkaline battery)

Hope this helps:)

The anode is usually made of zinc, while the cathode is manganese dioxide. The anode is a negative electrode related with oxidation or electron release.

An alkaline battery  is a main battery that gets its power from the reaction of zinc metal and manganese dioxide.

Alkaline batteries provide a better energy density and a longer shelf life than zinc chloride batteries.

The anode is  a negative electrode related with oxidation or electron release. The anode is the negative pole during discharge and the positive pole during charge in a rechargeable cell.

Hence, the anode is typically made of zinc, while the cathode is manganese dioxide.

To learn more about the alkaline battery,  refer to the link;

https://brainly.com/question/16967731

#SPJ2

The reason why there is an abundance of metamorphic rocks in the southwestern part of Mexico is the intense geologic activity in this area. In this area there is geologic activity triggered by the convergent plate boundary of the North American plate and the Cocos plate. The Cocos plate subducts bellow the North American plate, and that causes the surrounding crust to be exposed to high temperatures and pressures. Those high temperatures and pressure lead to metamorphism of the rocks that are deep into the crust. Also, the land is lifted up because of the subduction zone, so these metamorphic rocks start to emerge on the surface or very close to it because they have been pushed upwards.

a) 8.58 m

For an open-open tube, the fundamental frequency is given by

[tex]f=\frac{v}{2L}[/tex]

where

f is the fundamental frequency (the lowest frequency)

v is the speed of sound

L is the length of the tube

In this problem, we have

f = 20 Hz

v = 343 m/s (speed of sound in air)

Solving the equation for L, we find the shortest length of the tube:

[tex]L=\frac{v}{2f}=\frac{343 m/s}{2(20 Hz)}=8.58 m[/tex]

(b) 4.29 m

For an open-closed tube, the fundamental frequency is instead given by

[tex]f=\frac{v}{4L}[/tex]

Where in this problem, we have

f = 20 Hz

v = 343 m/s (speed of sound in air)

Solving the equation for L, we find the shortest length of the tube:

[tex]L=\frac{v}{4f}=\frac{343 m/s}{4(20 Hz)}=4.29 m[/tex]

Answer:

C

Explanation:

When A and B come in contact with each other, +12 - 12 = 0 so their changes cancel.

Now C has a charge of +12

When A and C come together they each have an equal share of that 12, so each of them has 6

So the answer is

A       B       C

6        0       6

which is C

Answer:

The atomic number of a nucleus will go down by two in alpha decay

Answer:

b) It is impossible to tell without knowing the masses.

Explanation:

The temperature change of a substance when it receives/gives off a certain amount of heat Q is given by

[tex]\Delta T= \frac{Q}{m C_s}[/tex]

where

Q is the amount of heat

m is the mass of the substance

Cs is the specific heat capacity of the substance

In this case, we have a hot piece of aluminum in contact with a cold piece of copper: the amount of heat given off by the aluminum is equal to the amount of heat absorbed by the copper, so Q is the same for the two substances. However, we see that the temperature change of the two substances depends on two other factors: the mass, m, and the specific heat, Cs. So, since we know only the specific heat of the two substances, but not their mass, we can't tell which object will experience the greater temperature change.

Conservation of energy means that initial kinetic energy =maximum gravitational potential energy. 1/2 * 3 * 10^2 = 150J. The gravitational potential energy at the top is 150 joules. The gravitational potential energy is calculated through mgh, so 150 = 3 * 10 * h. Height is 5 meters

Answer:

The force is tripled too.

Explanation:

The magnitude of the electric force (repulsion or attraction) between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance that separates them (Coulomb's Law).

[tex]F=k_{e} \frac{[q_{1}][q_{2}]}{r^{2}}[/tex]

Where

[tex]k_{e}[/tex] is the Coulomb's constante.

[tex]q_{1}[/tex] and [tex]q_{2}[/tex] are the signed magnitude of the charges.

[tex]r[/tex] the distance between charges.

So, if one of the charge is tripled, due the directly proportional product of the charges, the force will be tripled.

[tex]F=k_{e} \frac{[3q_{1}][q_{2}]}{r^{2}}[/tex]

or

[tex]F=k_{e} \frac{[q_{1}][3q_{2}]}{r^{2}}[/tex]

The result will be still the force tripled.

The answer is:North South North South.

Hope this helped :)

Answer: North, south, north, south.

Explanation:

In a usual magnetic field diagram, the vectors of the field "come" from the north pole and "enter" in the south pole.

In this case, we can see from where the field comes by the small arrows in the field lines, so in the figure the poles are:

North, South, North, South.

Where in the middle, the south pole of the left magnet is receiving the field that comes from the north pole in the other magnet, and the same for the outer poles.

"ps" stands for "pico-second".  It means 10⁻¹² second.

The period of this wave is 8.43 x 10⁻¹² second.

In a vacuum, the speed of any electromagnetic wave is 3 x 10⁸ m/s.

Wavelength = (speed) / (frequency)

But Frequency = 1 / period

So Wavelength = (speed) x (period)

Wavelength = (3 x 10⁸ m/s) x (8.43 x 10⁻¹² sec)

Wavelength = 2.5 x 10⁻³ meter

Wavelength = 2.5 millimeters

You can find the wavelength of an electromagnetic wave with a given period by first calculating frequency using the formula f = 1/T. Then, use the universal wave equation c = λv, to find the wavelength, λ = c/f. Plugging all the values, we find the wavelength is about 2.53 meters.

The subject of this question revolves around an

electromagnetic wave

with a given oscillation period and we need to find its wavelength. To solve this, we first have to convert the period into frequency, as the two are inverse to each other.

The frequency (f) can be calculated by taking the reciprocal of the period (T), so f = 1/T. Given that T = 8.43 ps (ps is picoseconds and 1 ps equals 10^-12 seconds), the frequency would therefore be f = 1/(8.43x10^-12 s) which equals approximately 1.19x10^11 Hz (Hz is the unit of frequency).

Now we use the universal wave equation, c = λv, where c is the speed of light (approximately 3 x 10^8 ms^-1 in a vacuum), v is the frequency, and λ is the wavelength we're trying to find. Solving for λ, we get λ = c/f. Substituting the values, we get λ = (3x10^8 m/s) / (1.19x10^11 Hz), which computes to approximately λ = 2.53m. Therefore, the wavelength of this electromagnetic wave is approximately 2.53 meters.

https://brainly.com/question/29774932

#SPJ3

D) It is a good conductor of electricity

Your Answers:

1: C. Weather Services

2: B. Seaweed

3: C. He developed a particularity narrow ship (I think.)

4:  True The founder/creator of the first echo sounder was German inventor, Alexander Behm.

5: B. The solution favors human needs over environmental. (I think.)

6: True (I think)

7: C. Polar bears and Walruses (I think.)

8: B. A single approach in every situation (I think)

9: A. Most pollution occurs in the ocean

10: A. Walrus Definition of a pinniped: a carnivorous aquatic mammal of the order <i>Pinnipedia</i>, such as a seal or walrus.

11: D. Water conditions around coral reefs (I think)

12: True

13: A. Coastal regions (I think)

Sorry if any of them are incorrect. Some of these I am unsure of how to answer. Hope I helped you,

-Anime.

Answer:

1.C.

2: B.

3: C.

4:  ?

5: B.

6: True

7: C.

8: B.

9: A.

10: A..

11: D.

Explanation:

Answer:

Explanation:

Good thing it says approximately. Your best guess is just a guess. It takes 1 hz (or 1 sine wave) about 0.62 seconds before it begins to repeat itself.

The frequency is  # of cycles / time = 1 hz / 0.62 = 1.61 hz/second.

Answer:

2.5s

Explanation:

Given parameters:

Decay constant of the nuclide = 4.6 x 10⁻³s⁻¹

Unkown:

Half life =?

The half life is the time take for half of the radioactive nuclei to disintegrate. It is mathematically expressed as:

Half life = 0.693/λ

Where λ is the decay constant

Since we have been given λ we plug it into the equation:

Half life = 0.693/4.6 x 10⁻³

Half life = 0.693/0.0046

Half life =150. 65s

Now we convert to minutes because the options are in minutes:

60s = 1 minute

150.65s = 150.65/60 = 2.5s

The half life of the nuclide is 2.5s

Answer:

-2 m/s

Explanation:

Assuming the collision is elastic, the total momentum must be conserved:

[tex]p_i = p_f[/tex]

[tex]m_1 u_1 + m_2 u_2 = m_1 v_1 + m_2 v_2[/tex]

where

m1 = 0.50 kg is the mass of the first ball

m2 = 1.00 kg is the mass of the second ball

u1 = +6.0 m/s is the initial velocity of the first ball

u2 = -12.0 m/s is the initial velocity of the second ball

v1 = -14 m/s is the final velocity of the first ball

v2 = ? is the final velocity of the second ball

By re-arranging the equation, we can find the final velocity of the 1.00 kg ball:

[tex]v_2 = \frac{m_1 u_1 + m_2 u_2 - m_1 v_1}{m_2}=\frac{(0.50 kg)(6.0 m/s)+(1.00 kg)(-12 m/s)-(0.50 kg)(-14 m/s)}{1.00 kg}=-2 m/s[/tex]

which means, 2 m/s in the same direction the second ball was travelling before the collision.

The speed of the second ball is 2 m/s

To calculate the speed of the second ball after the collision, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Solve for v'

Note: The negative sign can be ignored in the final answer

Hence, the speed of the second ball is 2 m/s.

Learn more about speed here: https://brainly.com/question/4931057

Given:

u = 8.5 cm

f = -14.0 cm

v = image distance

Using the mirror formula 1/u + 1/v = 1/f

1/8.5 + 1/v = 1/-14.0

Rewrite to solve for v:

v = (8.5 * -14.0) / (8.5 - (-14.0))

v = -119 / 22.5

v = -5.29 cm  ( round answer as needed.)

Thomson conducted a series of experiments on cathode ray tubes, which led him to the discovery of electrons.

This is how on April 30th, 1897 Thomson announced the discovery of the electron (although at that time he called it a corpuscle)

This discovery was considered one of the milestones in science of the late nineteenth century, since it allowed to have a new conception of the structure of matter and its interaction with energy.

It should be noted that from this discovery, Thomson proposed a new model of the atom that although erroneous, remained valid for years and served as the basis for new postulates and research on the subject.