Answer:
3.76 m/s
Explanation:
Instantaneous velocity: This can be defined as the velocity of an object in a non uniform motion. The S.I unit is m/s.
v' = dx(t)/dt..................... Equation 1
Where v' = instantaneous velocity, x = distance, t = time.
Given the expression,
x(t) = 28.0 m + (12.4 m/s)t - (0.0450 m/s³)t³
x(t) = 28 + 12.4t - 0.0450t³
Differentiating x(t) with respect to t.
dx(t)/dt = 12.4 - 0.135t²
dx(t)/dt = 12.4 - 0.135t²
When t = 8.00 s.
dx(t)/dt = 12.4 - 0.135(8)²
dx(t)/dt = 12.4 - 8.64
dx(t)/dt = 3.76 m/s.
Therefore,
v' = 3.76 m/s.
Hence, the instantaneous velocity = 3.76 m/s
Final answer:
To find the bird's instantaneous velocity at t = 8.00s, we differentiate its position function to get v(t) = 12.4 m/s - 0.135 m/s^2 × t^2, then substitute t = 8.00s to find v(8.00) = 3.76 m/s east.
Explanation:
The question asks for the instantaneous velocity of a bird flying due east when t = 8.00s, given the position function x(t) = 28.0 m + (12.4 m/s)t – (0.0450 m/s3)t3. To find the instantaneous velocity, we need to differentiate the position function with respect to time (t) to get the velocity function, v(t).
First, let's differentiate x(t):
Derivative of 28.0 m is 0 since it's a constant.
Derivative of (12.4 m/s)t is 12.4 m/s, as the derivative of t is 1.
Derivative of (-0.0450 m/s3)t3 is -0.135 m/s2 × t2, using the power rule for derivatives.
So, the velocity function is v(t) = 12.4 m/s - 0.135 m/s2 × t2. To find the instantaneous velocity at t = 8.00s, we plug in t = 8.00 into the velocity function:
v(8.00) = 12.4 m/s - 0.135 m/s2 × (8.002)
Calculating this gives us:
v(8.00) = 12.4 m/s - 0.135 m/s2 × 64.00 = 12.4 m/s - 8.64 m/s = 3.76 m/s
Therefore, the instantaneous velocity of the bird when t = 8.00s is 3.76 m/s east.
A car travels in the + x-direction on a straight and level road. For the first 4.00 s of its motion, the average velocity of the car is vav-x = 6.25 m/s. How far does the car travel in 4.00 s?
Answer:
25 m
Explanation:
The relationship between Velocity, distance and time is given as
S = v/t........................... Equation 1
Where S = average velocity of the car, d = distance covered by the car, t = time
Making d the subject of the equation,
d = vt.................... Equation 2
Given: v = 6.25 m/s, t = 4.00 s.
Substitute into equation 2,
d = 6.25(4)
d = 25 m.
Hence, the distance traveled by the car = 25 m
The distance traveled by the car will be "25 m".
The given values are:
Speed,
v = 6.25 m/s,Time,
t = 4.00 s
As we know the formula,
→ [tex]Distance = Speed\times Time[/tex]
or,
→ [tex]d = v\times t[/tex]
By substituting the values, we get
[tex]= 6.25\times 4[/tex]
[tex]=25 \ m[/tex]
Thus the above answer is right.
Learn more about velocity here:
https://brainly.com/question/13213887
An object is attached to the lower end of a 32-coil spring that is hanging from the ceiling. fie spring stretches by 0.160 m. The spring is then cut into two identical springs of 16 coils each. As the drawing shows, each spring is attached between the ceiling and the object. By how much does each spring stretch
Answer:
0.080 m
Explanation:
According to Hooke's law, a spring with stiffness k will stretch a distance of Δx when a force F is applied:
F = k Δx
If we say the weight of the object is W, then the stiffness of the original spring is:
W = k (0.160 m)
k = W / 0.160
When the spring is cut in half, the stiffness of each new spring is the same as the original. This time, the weight of the object is evenly distributed between each spring, so the force on each is W/2.
F = k Δx
W/2 = (W/0.160) Δx
1/2 = Δx / 0.160
Δx = 0.080
Each spring stretches 0.080 meters.
A small, solid sphere of mass 0.9 kg and radius 47 cm rolls without slipping along the track consisting of slope and loop-the-loop with radius 4.75 m at the end of the slope. It starts from rest near the top of the track at a height h, where h is large compared to 47 cm. If the g = 9.8 m/s^2 and I(solid sphere) = 2/5 mr^2, what is the minimum value of h such that the sphere completes the loop?
The minimum height that the sphere should start from to complete a loop-the-loop is 23.75 meters, as calculated through the conservation of energy and dynamics principles.
Explanation:In this physics problem, the minimum height (h) that the solid sphere needs to start from to ensure it completes the loop-the-loop involves applying principles of conservation of energy and dynamics. Initially, the sphere has potential energy equal to mgh, and no kinetic energy as it starts from rest. As it descends, it gains kinetic energy and loses potential energy.
For the ball to successfully complete the loop, the force at the top must be equivalent to the weight of the sphere plus the force necessary to maintain circular motion. This can be written as: mg + mv²/r = 5mg. From here, we can derive the equation for v²: v² = 4gr.
Since the kinetic energy at the top of the loop is (1/2)mv² and the potential energy is 2mgr, by equating total energy at the top of the loop (potential plus kinetic) to the initial potential energy (mgh), we obtain: mgh = (1/2)m(4gr) + 2mgr.
From this equation, we can solve for h and find that h = 5r = 5*4.75m = 23.75m. This is the minimum height the sphere must start from to complete the loop.
Learn more about Minimum height for loop-the-loop here:https://brainly.com/question/29369755
#SPJ11
A light rope is attached to a block with mass 4.10 kg that rests on a frictionless, horizontal surface. The horizontal rope passes over a frictionless, massless pulley, and a block with mass m is suspended from the other end. When the blocks are released, the tension in the rope is 14.7 N.
a. Draw two free-body diagrams: one for each block.
b. What is the acceleration of either block?
c. Find m.
d. How does the tension compare to the weight of the hanging block?
Answer:
a) please find the attachment
(b) 3.65 m/s^2
c) 2.5 kg
d) 0.617 W
T<weight of the hanging block
Explanation:
a) please find the attachment
(b) Let +x be to the right and +y be upward.
The magnitude of acceleration is the same for the two blocks.
In order to calculate the acceleration for the block that is resting on the horizontal surface, we will use Newton's second law:
∑Fx=ma_x
T=m1a_x
14.7=4.10a_x
a_x= 3.65 m/s^2
c) in order to calculate m we will apply newton second law on the hanging
block
∑F=ma_y
T-W= -ma_y
T-mg= -ma_y
T=mg-ma_y
T=m(g-a_y)
a_x=a_y
14.7=m(9.8-3.65)
m = 2.5 kg
the sign of ay is -ve cause ay is in the -ve y direction and it has the same magnitude of ax
d) calculate the weight of the hanging block :
W=mg
W=2.5*9.8
=25 N
T=14.7/25
=0.617 W
T<weight of the hanging block
(Schaum’s 18.25) A 55 g copper calorimeter (c=377 J/kg-K) contains 250 g of water (c=4190 J/kg-K) at 18o When a 75 g metal alloy at 100o C is dropped into the calorimeter, the final equilibrium temperature is 20.4o C. What is the specific heat of the alloy?
Answer:
1205.77 J/kg.K
Explanation:
Heat lost by alloy = heat gained by water + heat gained by the calorimeter
c₁m₁(t₂-t₃) = c₂m₂(t₃-t₁) + c₃m₃(t₃-t₁)................. Equation 1
Where c₁ = specific heat capacity of the alloy, m₁ = mass of the alloy, t₂ = initial temperature of the alloy, t₃ = equilibrium temperature, c₂ = specific heat capacity of water, m₂ = mass of water, t₁ = initial temperature of water and calorimter, c₃ = specific heat capacity of calorimter, m₃ = mass of calorimter.
Making c₁ the subject of the equation,
c₁ = c₂m₂(t₃-t₁) + c₃m₃(t₃-t₁)/m₁(t₂-t₃)........................ Equation 2
Given: c₂ = 4190 J/kgK, m₂ = 250 g = 0.25 kg, m₁ = 75 g = 0.075 kg, m₃ = 55 g = 0.055 kg, c₃ = 377 J/kg.K, t₁ = 18 °C, t₂ = 100 °C, t₃ = 24.4 °C.
Substitute into equation 2
c₁ = [0.25×4190×(24.4-18) + 0.055×377×(24.4-18)]/[0.075(100-24.4)]
c₁ = (6704+132.704)/5.67
c₁ = 6836.704/5.67
c₁ = 1205.77 J/kg.K
Thus the specific heat capacity of the alloy = 1205.77 J/kg.K
Final answer:
The student's question is about calculating the specific heat capacity of a metal alloy using the principles of calorimetry and the conservation of energy in a heat exchange process.
The student is asking about finding the specific heat capacity of a metal alloy using calorimetry. We know that when objects at different temperatures are combined, they will exchange heat energy until they reach thermal equilibrium. We can use the equation Q = mc ext{ extdegree}T (where Q is heat energy, m is mass, c is specific heat capacity, and ext{ extdegree}T is the change in temperature) to find the specific heat capacity. In this scenario, the heat lost by the metal alloy will equal the heat gained by the copper calorimeter and the water contained within it. By setting these two equations equal to each other and solving for the specific heat capacity of the alloy, we can find that value.
A gas had an initial pressure of 4.80atm in a 5.50L container. After transfering it to a 9.60L container, the gas was found to have a pressure of 2.10atm and a temperature of 25.00∘C. What was the initial temperature in degrees Celsius?
To solve this problem we will apply the concepts related to the ideal gas equations. Which defines us that the relationship between pressure, temperature and volume in the first state must be equivalent in the second state of matter. In mathematical terms this is
[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}[/tex]
If we rearrange the equation to find the Temperature at state 1 we have that
[tex]T_1 = \frac{P_1V_1T_2}{P_2V_2}[/tex]
Replacing our values we have that
[tex]T_1 = \frac{(4.8*5.5*298.15)}{(2.1*9.6)}[/tex]
[tex]T_1 = 390.435K[/tex]
Therefore the temperature is 390.435K
Answer:
117 ∘C
Explanation:
Use the combined gas law.
P1V1/T1 = P2V2/T2
Let the subscript 2 represent the 9.60L of gas at 25.0∘C and the subscript 1 represent the gas at the initial volume of 5.50L.
Remember to covert the temperature from degrees Celsius to Kelvin by adding 273.15.
Therefore, we have that T2=298.15K, P2=2.10atm, V2=9.60L, P1=4.80atm, V1=5.50L, and T1 is unknown.
Rearrange the equation for T1 and substitute in the known values to solve for the initial temperature.
T1T1T1=P1V1T2P2V2=(4.80atm)(5.50L)(298.15K)(2.10atm)(9.60L)=390.434K
Now, convert this temperature from Kelvin to degrees Celsius.
T1=390.434K−273.15 = 117.28∘C
Therefore, after rounding this value to three significant figures, we find that the initial temperature is 117∘C.
A runner wants to run 11.8 km. Her running pace is 7.4 mi/hr. How many minutes must she run? Express your answer using two significant figures.
Answer:
She must run 59 min to run 11.8 km.
Explanation:
Hi there!
First let's convert mi/h into km/min:
7.4 mi/h · (1.61 km /1 mi) · (1 h / 60 min) = 0.20 km/min (notice how the units mi and h cancel).
The runner runs at 0.20 km/ min, i.e., every minute she travels 0.20 km.
If 0.20 km are traveled in 1 min, then 11.8 km will be traveled in:
11.8 km / 0.20 km/min = 59 min
She must run 59 min to run 11.8 km.
An unknown sample has a volume of 3.61 cm3 and a mass of 9.93 g. What is the density (g/cm3) of the unknown?
Answer:
2.75 g/cm³
Explanation:
given,
Volume of unknown sample, V = 3.61 cm³
mass of the sample, m = 9.93 g
density = ?
We know,
[tex]density = \dfrac{mass}{volume}[/tex]
[tex]\rho= \dfrac{9.93}{3.61}[/tex]
[tex]\rho = 2.75\ g/cm^3[/tex]
Hence, density of the unknown sample is equal to 2.75 g/cm³
What are the first three overtones of a bassoon that has a fundamental frequency of 90.0 Hz? It is open at both ends. (The overtones of a real bassoon are more complex than this example, because its double reed makes it act more like a tube closed at one end.)
Answer:
[tex]f_{2}=180Hz,f_{3}=270Hz,f_{4}=360Hz\\[/tex]
Explanation:
Given data
Frequency f=90 Hz
To find
First three overtones of bassoon
Solution
The fundamental frequency of bassoon is found by substituting n=1 in below equation
f=v/λ=nv/2L
[tex]f_{1}=v/2L[/tex]
The first overtone of bassoon is found by substituting n=2
So
[tex]f_{2}=2v/2L\\f_{2}=2(v/2L)\\as \\f_{1}=v/2L\\So\\f_{2}=2f_{1}\\f_{2}=2(90Hz)\\f_{2}=180Hz[/tex]
The second overtone of bassoon is found by substituting n=3
So
[tex]f_{3}=3v/2L\\f_{3}=3(v/2L)\\as \\f_{1}=v/2L\\So\\f_{3}=3f_{1}\\f_{3}=3(90Hz)\\f_{3}=270Hz[/tex]
The third overtone of bassoon is found by substituting n=4
So
[tex]f_{4}=4v/2L\\f_{4}=4(v/2L)\\as \\f_{1}=v/2L\\So\\f_{4}=4f_{1}\\f_{4}=4(90Hz)\\f_{4}=360Hz[/tex]
The first three overtones of a bassoon with a fundamental frequency of 90.0 Hz are 180.0 Hz, 270.0 Hz and 360.0 Hz. The calculation is based on the behaviour of the bassoon as a tube open at both ends where overtones occur at integer multiples of the fundamental frequency.
Explanation:The question is asking for the first three overtones of a bassoon that has a fundamental frequency of 90.0 Hz. The bassoon is assumed to act like a tube that is open at both ends. For a tube open at both ends, the overtones, also called harmonics, occur at integer multiples of the fundamental frequency.
In this case, the fundamental frequency (first harmonic) is 90.0 Hz. The first overtone (which is the second harmonic) is then 2 * 90.0 Hz = 180.0 Hz. The second overtone (third harmonic) is 3 * 90.0 Hz = 270 Hz, and the third overtone (fourth harmonic) is 4 * 90.0 Hz = 360 Hz.
Thus, the first three overtones of a bassoon that has a fundamental frequency of 90.0 Hz, and is open at both ends, are 180.0 Hz, 270.0 Hz, and 360.0 Hz respectively.
Learn more about Overtones in Music here:https://brainly.com/question/33933724
#SPJ11
A circular rod with a gage length of 3.2 mm and a diameter of 2 cmcm is subjected to an axial load of 57 kNkN . If the modulus of elasticity is 200 GPaGPa , what is the change in length?
To solve this problem we will apply the concepts related to the change in length given by the following relation,
[tex]\delta_l = \frac{Pl}{AE}[/tex]
Here the variables mean the following,
P = Load
l = Length
A = Area
E = Modulus of elasticity
Our values are,
[tex]l = 3.2 m[/tex]
[tex]\phi = 2cm = 0.02m[/tex]
[tex]P = 57kN = 57*10^3N[/tex]
[tex]E = 200Gpa[/tex]
We can obtain the value of the Area through the geometrical relation:
[tex]A = \frac{\pi}{4} \phi^2[/tex]
Replacing,
[tex]A = \frac{\pi}{4} (0.02)^2[/tex]
[tex]A = 3.14*10^{-4}m^2[/tex]
Using our first equation,
[tex]\delta_l = \frac{Pl}{AE}[/tex]
[tex]\delta_l = \frac{(57*10^3)(3.2)}{(3.14*10^{-2})(200*10^9)}[/tex]
[tex]\delta_l = 0.000029044m[/tex]
[tex]\delta_l = 0.029044mm[/tex]
Therefore the change in length is 0.029mm
A 3-kW resistance heater in a water heater runs for 3 hours to raise the water temperature to the desired level. Determine the amount of electric energy used in both kWh and kJ. The amount of electricity used, in kWh, is kWh. The amount of electricity used, in kJ, is
Answer:
Energy, 9 kWh or 32400 kJ
Explanation:
Given that,
The power of heater, P = 3 kW
It runs for 3 hours to raise the water temperature to the desired level. We need to find the amount of electric energy used. We know that the electrical power of an object is given by total energy delivered per unit time. It is given by :
[tex]P=\dfrac{E}{t}[/tex]
[tex]E=P\times t[/tex]
[tex]E=3\ kW\times 3\ h[/tex]
E = 9 kWh
Since, 1 kWh = 3600 kJ
E = 32400 kJ
So, the amount of electric energy used is 9 kWh or 32400 kJ. Hence, this is the required solution.
The amount of electric energy used by a 3-kW resistance heater running for 3 hours would be 9kWh, which is equivalent to 32,400 kJ.
Explanation:To determine the amount of electric energy used, we use the formula E = Pt, where E represents energy, P is power, and t is time. Here, the power used is 3kW (or kilowatts) and time is 3 hours. So, E = 3kW * 3 hours = 9 kWh (kilowatt-hours).
Moving forward, 1 kWh is equal to 3600 kilojoules (kJ). Therefore, to convert the energy we obtained in kilowatt-hours to kilojoules, we multiply it by 3600. This amounts to: 9 kWh * 3600 kJ/kWh = 32,400 kJ.
Therefore, the amount of electric energy used is 9 kWh or 32,400 kJ.
Learn more about Electric Energy Consumption here:https://brainly.com/question/34856812
#SPJ11
During the battle of Bunker Hill, Colonel William Prescott ordered the American Army to bombard the British Army camped near Boston. The projectiles had an initial velocity of 41 m/s at 38° above the horizon and an initial position that was 35 m higher than where they hit the ground. How far did the projectiles move horizontally before they hit the ground? Ignore air resistance.
Answer:
[tex]s=203.149\ m[/tex]
Explanation:
Given:
initial velocity of projectile, [tex]u=41\ m.s^{-1}[/tex]angle of projection above horizontal, [tex]\theta=38^{\circ}[/tex]height of the initial projection point above the ground, [tex]y=35\ m[/tex]
Vertical component of the velocity:
[tex]u_y=u.\sin\theta[/tex]
[tex]u_y=41\times \sin38[/tex]
[tex]u_y=25.242\m.s^{-1}[/tex]
The time taken in course of going up:
(at top the final velocity will be zero)
[tex]v_y=u_y-g.t[/tex]
[tex]0=25.242-9.8\times t[/tex]
[tex]t=2.576\ s[/tex]
In course of going up the maximum height reached form the initial point:
(at top height the final velocity is zero. )
using eq. of motion,
[tex]v_y^2=u_y^2-2\times g.h[/tex]
where:
[tex]v_y=[/tex] final vertical velocity while going up.=0
[tex]h=[/tex] maximum height
[tex]0^2=25.242^2-2\times 9.8\times h[/tex]
[tex]h=32.5081\ m[/tex]
Now the total height to be descended:
[tex]h'=h+y[/tex]
[tex]h'=32.5081+35[/tex]
[tex]h'=67.5081\ m[/tex]
Now the time taken to fall the gross height in course of falling from the top:
[tex]h'=v_y.t'+\frac{1}{2} g.t'^2[/tex]
[tex]67.5081=0+4.9\times t'^2[/tex]
[tex]t'=3.7118\ s[/tex]
Now the total time the projectile spends in the air:
[tex]t_t=t+t'[/tex]
[tex]t_t=2.576+3.7118[/tex]
[tex]t_t=6.2878\ s[/tex]
Now the horizontal component of the initial velocity:
(it remains constant throughout the motion)
[tex]u_x=u.\cos\theta[/tex]
[tex]u_x=41\times \cos38[/tex]
[tex]u_x=32.3084\ m.s^{-1}[/tex]
Therefore the horizontal distance covered in the total time;
[tex]s=u_x\times t_t[/tex]
[tex]s=32.3084\times 6.2878[/tex]
[tex]s=203.149\ m[/tex]
Answer:
Explanation:
initial velocity, u = 41 m/s
angle, θ = 38 °
height, h = 35 m
Let the time is t.
Use second equation of motion in vertical direction
h = ut + 1/2 gt²
- 35 = 41 Sin 38 t - 0.5 x 9.8 x t²
4.9t² - 25.2 t - 35 = 0
[tex]t = \frac{25.2 \pm \sqrt{25.2^{2}+4\times 4.9\times 35}}{2\times 4.9}[/tex]
t = 6.3 second
Horizontal distance traveled in time t is
d = uCos 38 x t
d = 41 x Cos 38 x 6.3
d = 203.54 m
How do astronomers use the Doppler effect to determine the velocities of astronomical objects?
Astronomers apply the Doppler effect because from there it is possible to obtain information about the change of light, which in turn affects the light spectrum and determines the movement of a body moving away or approaching us. The extent of the shift is directly proportional to the source's radial velocity relative to the observer.
The phenomenon that occurs to determine this process is linked to the wavelength. When the wave source moves towards you, the wavelength tends to decrease. This leads to a change in the color of the light moving towards the end of the spectrum, that is, towards the color blue. (It is really violet, but by convention the color blue was chosen as it is a more common color) When the source moves away from you and the wavelength lengthens, we call the color change a shift to red. Because the Doppler effect was first used with visible light in astronomy, the terms "blue shift" and "red shift" were well established.
Final answer:
Astronomers use the Doppler effect to calculate the velocities of stars and galaxies by observing changes in light wavelengths due to motion towards or away from the observer. It also helps in exoplanet detection and measuring a star's rotation speed by analyzing the broadened spectral lines.
Explanation:
Astronomers utilize the Doppler effect to determine the velocities of astronomical objects such as stars and galaxies. To calculate the radial velocity of an object, they require the speed of light, the original wavelength of the light emitted by the object, and the observed change in this wavelength due to the Doppler shift. This shift occurs because the object is moving relative to Earth—approaching objects cause a blue shift, where the wavelength shortens, while receding objects cause a red shift, where the wavelength lengthens.
The Doppler effect is also instrumental in exoplanet detection through stellar radial velocity measurements. When a planet orbits a star, it imparts a gravitational tug that causes the star to wobble slightly. This wobble changes the star's radial velocity, which can be detected as small shifts in the star's spectral lines, irrespective of the star's distance, as long as it can be observed with a high-resolution spectrograph.
Additionally, the Doppler effect helps measure the rotation speed of distant stars. By analyzing broadened spectral lines, which result from the spread of Doppler shifts due to the rotating star's edges moving towards and away from us, astronomers can infer how fast a star is spinning.
Your car's blinker has a period of 0.85 s and at the moment is in phase with a faster blinker on the car in front of you. They drift out of phase but then get back in phase after 16 s. What is the period of the other car's blinker in s?
Answer:
The time period of the other car's blinker is 0.807
Solution:
As per the question:
Time period of the car blinker, T = 0.85 s
Time taken by the blinkers to get back in phase, t = 16 s
Now,
To find the time period of the other car's blinker:
No. of oscillations, [tex]n = \frac{t}{T}[/tex]
Thus for the blinker:
[tex]n = \frac{16}{0.85}[/tex]
Now,
For the other car's blinker with time period, T':
[tex]n' = \frac{16}{T'}[/tex]
Time taken to get back in phase is t = 16 s:
n' - n = 1
[tex]\frac{16}{T'} - \frac{16}{0.85} = 1[/tex]
[tex]\frac{1}{T'} = \frac{1}{16} + \frac{1}{0.85}[/tex]
[tex]\frac{1}{T'} = 1.2389[/tex]
[tex]T' = \frac{1}{1.2389} = 0.807[/tex]
The period of the other car's blinker is approximately 1.06 s.
Explanation:To solve this problem, we need to understand the concept of phase and period. The period is the time it takes for a complete cycle of a periodic motion. In this case, the period of your car's blinker is given as 0.85 s. The phase refers to the position within a cycle at a given time. If your blinker is in phase with the other car's blinker initially, it means they are both starting their cycles at the same time.
However, they drift out of phase and then get back in phase after 16 s. This means that the other car's blinker completes a whole number of cycles in 16 s. Let's call the period of the other car's blinker T. So, in 16 s, the other car's blinker completes 16/T cycles. We know that the two cars get back in phase after 16 s, which means they complete the same number of cycles in that time.
Therefore, we can set up the following equation: 16/T = 16/0.85. Solving for T, we find that the period of the other car's blinker is approximately 1.06 s.
3. In a physics lab, 0.500-kg cart (Cart A) moving rightward with a speed of 100 m/s collides with a 1.50-kg cart (Cart B) moving leftward with a speed of 20 m/s. The two carts stick together and move as a single object after the collision. Determine the post-collision speed of the two carts.
Answer:
The speed of the two carts after the collision is 10 m/s.
Explanation:
Hi there!
The momentum of the system Cart A - Cart B is conserved because there is no external force acting on the system at the instant of the collision. Then, the momentum of the system before the collision will be equal to the momentum of the system after the collision. The momentum of the system is calculated as the sum of momenta of cart A and cart B:
initial momentum = mA · vA1 + mB · vB1
final momentum = (mA + mB) · vAB2
Where:
mA = mass of cart A = 0.500 kg
vA1 = velocity of cart A before the collision = 100 m/s
mB = mass of cart B = 1.50 kg.
vB1 = velocity of cart B before the collision = - 20 m/s
vAB2 = velocity of the carts that move as a single object = unknown.
(notice that we have considered leftward as negative direction)
Since the momentum of system remains constant:
initial momentum = final momentum
mA · vA1 + mB · vB1 = (mA + mB) · vAB2
Solving for vAB2:
(mA · vA1 + mB · vB1) / (mA + mB) = vAB2
(0.500 kg · 100 m/s - 1.50 kg · 20 m/s) / (0.500 kg + 1.50 kg) = vAB2
vAB2 = 10 m/s
The speed of the two carts after the collision is 10 m/s.
The post-collision speed of the two carts is 10 m/s moving in the positive x-direction.
Explanation:In order to determine the post-collision speed of the two carts, we can use the principle of conservation of momentum. The total momentum before the collision is equal to the total momentum after the collision.
Before the collision, Cart A has a mass of 0.500 kg and a velocity of 100 m/s, while Cart B has a mass of 1.50 kg and a velocity of -20 m/s (negative because it is moving leftward). After the collision, the two carts stick together, so their masses add up to 2 kg.
Using the conservation of momentum equation: (Momentum before collision) = (Momentum after collision)
(0.500 kg × 100 m/s) + (1.50 kg × -20 m/s) = 2 kg × v
By solving this equation, we find that the post-collision speed of the two carts is 10 m/s moving in the positive x-direction.
Learn more about Momentum here:https://brainly.com/question/30677308
#SPJ11
Calculate the osmotic pressure at 36.6 degrees C of a solution made by dissolving 9.18 g of glucose in 34.2 mL of solution. Enter your answer using 2 decimal places!!!!
Answer:
38.35 bar
Explanation:
We are given that
Temperature=T=36.6 degree Celsius=36.6+273=309.6 K
Given mass of glucose=9.18 g
Molar mass of glucose([tex]C_6H_{12}O_6=6(12)+12(1)+6(16)[/tex]=180 g
Mass of c=12 g,mass of hydrogen=1 g, mass of O=16 g
Volume of solution=34.2 mL
Molarity of solution=[tex]\frac{given\;mass}{molar\;mass\times volume}\times 1000[/tex]
Where volume (in mL)
Molarity of solution=[tex]\frac{9.18}{180\times 34.2}\times 1000=1.49 M[/tex]
We know that
Osmotic pressure=[tex]\pi=MRT[/tex]
Where M=Molarity of solution
R=Constant=0.08314 Lbar/mol k
T=Temperature in kelvin
Using the formula
[tex]\pi=1.49\times 0.08314\times 309.6=38.35 bar[/tex]
Hence, the osmotic pressure=38.35 bar
A juggler throws a bowling pin straight up with an initial speed of 8.20 m/s. How much time elapses until the bowling pin returns to the juggler’s hand?
The time it takes for the bowling pin to return to the juggler's hand is approximately [tex]\( 1.13 \, \text{s} \)[/tex].
To find the time it takes for the bowling pin to return to the juggler's hand, you can use the kinematic equation for vertical motion under constant acceleration. The equation is:
[tex]\[ h = v_0 t - \frac{1}{2}gt^2 \][/tex]
Where:
- [tex]\( h \)[/tex] is the displacement (in this case, the height the bowling pin reaches, which is zero when it returns to the hand),
- [tex]\( v_0 \)[/tex] is the initial velocity,
- [tex]\( t \)[/tex] is the time,
- [tex]\( g \)[/tex] is the acceleration due to gravity (approximately [tex]\( 9.8 \, \text{m/s}^2 \))[/tex].
In this case, the final height [tex](\( h \))[/tex] is zero because the bowling pin returns to the juggler's hand. The initial velocity [tex](\( v_0 \))[/tex] is given as [tex]\( 8.20 \, \text{m/s} \)[/tex], and [tex]\( g \) is \( 9.8 \, \text{m/s}^2 \)[/tex].
Plugging in these values, the equation becomes:
[tex]\[ 0 = (8.20 \, \text{m/s}) \cdot t - \frac{1}{2}(9.8 \, \text{m/s}^2) \cdot t^2 \][/tex]
Now, you can solve this quadratic equation for [tex]\( t \)[/tex]. The general form of a quadratic equation is [tex]\( at^2 + bt + c = 0 \)[/tex], where [tex]\( a = -\frac{1}{2}(9.8 \, \text{m/s}^2) \), \( b = 8.20 \, \text{m/s} \), and \( c = 0 \)[/tex]. The solutions to this equation give you the times when the bowling pin is at the initial and final heights.
You can use the quadratic formula to solve for [tex]\( t \)[/tex]:
[tex]\[ t = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a} \][/tex]
where [tex]\( a = -\frac{1}{2}(9.8 \, \text{m/s}^2) \), \( b = 8.20 \, \text{m/s} \), and \( c = 0 \)[/tex].
[tex]\[ t = \frac{-8.20 \, \text{m/s} \pm \sqrt{(8.20 \, \text{m/s})^2 - 4 \cdot \left(-\frac{1}{2}(9.8 \, \text{m/s}^2)\right) \cdot 0}}{2 \cdot \left(-\frac{1}{2}(9.8 \, \text{m/s}^2)\right)} \][/tex]
Simplifying further:
[tex]\[ t = \frac{-8.20 \, \text{m/s} \pm \sqrt{67.24}}{-9.8} \][/tex]
Now, calculate the two possible values for [tex]\( t \)[/tex] using both the plus and minus signs:
[tex]\[ t_1 = \frac{-8.20 + \sqrt{67.24}}{-9.8} \][/tex]
[tex]\[ t_2 = \frac{-8.20 - \sqrt{67.24}}{-9.8} \][/tex]
Calculating these values:
[tex]\[ t_1 \approx 1.13 \, \text{s} \][/tex]
[tex]\[ t_2 \approx -0.58 \, \text{s} \][/tex]
Since time cannot be negative in this context, we discard the negative solution. Therefore, the time it takes for the bowling pin to return to the juggler's hand is approximately [tex]\( 1.13 \, \text{s} \)[/tex].
flat sheet is in the shape of a rectangle with sides of lengths 0.400 mm and 0.600 mm. The sheet is immersed in a uniform electric field of magnitude 76.7 N/CN/C that is directed at 20 ∘∘ from the plane of the sheeta- Find the magnitude of the electric flux through the sheet?
Answer:
[tex]6.29591\times 10^{-6}\ N/C^2[/tex]
Explanation:
Flux is given by
[tex]\phi=EAcos\theta[/tex]
A = Area
[tex]A=0.4\times 10^{-3}\times 0.6\times 10^{-3}[/tex]
E = Electric field = 76.7 N/C
Angle is given by
[tex]\theta=90-20\\\Rightarrow \theta=70^{\circ}[/tex]
[tex]\phi=76.7\times 0.4\times 10^{-3}\times 0.6\times 10^{-3}\times cos70\\\Rightarrow \phi=6.29591\times 10^{-6}\ N/C^2[/tex]
The flux through the sheet is [tex]6.29591\times 10^{-6}\ N/C^2[/tex]
Two point charges are placed on the x axis. The first charge, q1 = 8.00 nC, is placed a distance 16.0 m from the origin along the positive x axis; the second charge, q2 = 6.00 nC, is placed a distance 9.00 m from the origin along the negative x axis.Calculate the electric field at point A, located at coordinates (0 mm, 12.0 mm ). Give the x and y components of the electric field as an ordered pair. Express your answer in newtons per coulomb to three significant figures. EAx, EAy =
The x and y components of the electric field at point A are [tex]EAx = 3.11 * 10^4 N/C~ and~ EAy = 0 N/C.[/tex]
The net electric field at point A due to two point charges can be found by calculating the electric field contributed by each charge independently and then summing the components to find the net electric field as an ordered pair.
Finally, we sum the x-components and sum the y-components of the electric fields from both charges to get the net electric field at point A as an ordered pair (EAx, EAy).
For q1:
r1x = 16.0 m
r1y = 0.012 m (converting 12.0 mm to meters)
[tex]r1 = sqrt(r1x^2 + r1y^2)\\r_1 = sqrt(16.0^2 + 0.012^2) \\r_1 = 16.0001 m[/tex]
For q2:
[tex]r2x = -9.0 m\\r2y = 0.012 m (same as for q1)\\r2 = sqrt(r2x^2 + r2y^2) \\r2 = sqrt((-9.0)^2 + 0.012^2)\\ r2 = 9.0001 m[/tex]
Now, we can calculate the electric field contributions from each charge:
[tex]E1x = (8.99 * 10^9) * (8 * 10^-9) / (16.0001)^2 \\E1x = 1.94 * 10^4 N/C\\E1y = 0 E2y = (8.99 * 10^9) * (6 * 10^-9) / (9.0001)^2 \\E2y= 1.17 * 10^4 N/C\\E2y = 0 E1x[/tex]
Finally, we add the x-components of the electric fields vectorially:
[tex]EAx = E1x + E2x \\= 1.94 * 10^4 + 1.17 * 10^4 \\= 3.11 * 10^4 N/C[/tex]
The y-component of the electric field, EAy, is 0 since both charges are on the x-axis.
So, the x and y components of the electric field at point A are [tex]EAx = 3.11 * 10^4 N/C~ and~ EAy = 0 N/C.[/tex]
A sample of nitrogen gas exerts a pressure of 9.80 atm at 32 C. What would its temperature be (in C) when its pressure is increased to 11.2 atm?
Answer:
T₂ = 111.57 °C
Explanation:
Given that
Initial pressure P₁ = 9.8 atm
T₁ = 32°C = 273 + 32 =305 K
The final pressure P₂ = 11.2 atm
Lets take the final temperature = T₂
We know that ,the ideal gas equation
If the volume of the gas is constant ,then we can say that
[tex]\dfrac{P_2}{P_1}=\dfrac{T_2}{T_1}[/tex]
[tex]T_2=\dfrac{P_2}{P_1}\times T_1[/tex]
Now by putting the values in the above equation ,we get
[tex]T_2=\dfrac{11.2}{9.8}\times 305\ K[/tex]
[tex]T_2=348.57\ K[/tex]
T₂ = 384.57 - 273 °C
T₂ = 111.57 °C
Two balls, made of different materials, are rubbed against each other, resulting in 0.30 nC of charge moving from one ball to the other. The balls are then held 0.90 m apart. What is the magnitude of the dipole moment of the two balls?
Answer:
[tex]5.4\times 10^{-10}C-m[/tex]
Explanation:
We are given that
Charge=[tex]q=0.30 nC=0.3\times 10^{-9} C[/tex]
[tex]1 nC=10^{-9}C[/tex]
Distance between two balls=l=0.90 m
We have to find the magnitude of dipole moment of the two balls.
We know that
Dipole moment=[tex]\mid p\mid=2lq[/tex]
Where q= Charge
l=Distance between two bodies
Using the formula
Magnitude of dipole moment=[tex]\mid P\mid=2\times 0.3\times 10^{-9}\times 0.9=5.4\times 10^{-10}C-m[/tex]
Hence, the magnitude of the dipole moment of the two balls=[tex]5.4\times 10^{-10}C-m[/tex]
An unknown gas effuses 2.3 times faster than N2O4 at the same temperature. What is the identity of the unknown gas?
Answer:
The molar mass of the unknown gas is 17.3 g/mol. The molar mass matches that of ammonia (NH₃) the most (17 g/mol)
Explanation:
Let the unknown gas be gas 1
Let N₂O₄ gas be gas 2
Rate of effusion ∝ [1/√(Molar Mass)]
R ∝ [1/√(M)]
R = k/√(M) (where k is the constant of proportionality)₁₂
R₁ = k/√(M₁)
k = R₁√(M₁)
R₂ = k/√(M₂)
k = R₂√(M₂)
k = k
R₁√(M₁) = R₂√(M₂)
(R₁/R₂) = [√(M₂)/√(M₁)]
(R₁/R₂) = √(M₂/M₁)
R₁ = 2.3 R₂
M₁ = Molar Mass of unknown gas
M₂ = Molar Mass of N₂O₄ = 92.01 g/mol
(2.3R₂/R₂) = √(92.01/M₁)
2.3 = √(92.01/M₁)
92.01/M₁ = 2.3²
M₁ = 92.01/5.29
M₁ = 17.3 g/mol
The molar mass matches that of ammonia the most (17 g/mol)
The unknown gas in the system has been ammonia.
The rate of diffusion of the two gases has been proportional to the molar mass of the gases.
The ratio of the rate of two gases can be given as:
[tex]\rm \dfrac{RateA}{RateB}\;=\;\sqrt{\dfrac{Molar\;mass\[A}{Molar\;mass\;B} }[/tex]
The two gases can be given as:
Gas A = Nitrogen tetraoxide = 2.3x
Gas B = x
[tex]\rm \dfrac{2.3x}{x}\;=\;\sqrt{\dfrac{92.011}{m} }[/tex]
Mass of the unknown gas = 17.39 grams.
The mass has been equivalent to the mass of the Ammonia. Thus, the unknown gas in the system has been ammonia.
For more information about the diffusion of gas, refer to the link:
https://brainly.com/question/879602
Cathode ray tubes (CRTs) used in old-style televisions have been replaced by modern LCD and LED screens. Part of the CRT included a set of accelerating plates separated by a distance of about 1.54 cm. If the potential difference across the plates was 27.0 kV, find the magnitude of the electric field (in V/m) in the region between the plates. HINT
Answer:
1753246.75325 V/m
Explanation:
d = Distance of separation = 1.54 cm
V = Potential difference = 27 kV
When the voltage is divided by the distance between the plates we get the electric field.
Electric field is given by
[tex]E=\dfrac{V}{d}\\\Rightarrow E=\dfrac{27\times 10^3}{1.54\times 10^{-2}}\\\Rightarrow E=1753246.75325\ V/m[/tex]
The magnitude of the electric field in the region between the plates is 1753246.75325 V/m
An electron is projected horizontally into the uniform electric field directed vertically downward between two parallelplates. The plates are 2.00 cm apart and are of length 4.00 cm. The initial speed of the electron is vi = 8.00 × 106 m/s. As it enters the region between the plates, the electron is midway between the two plates; as it leaves, the electron just misses the upperplate.a)What is the magnitude ofv the electric field?
Answer:
455N/C
Explanation:
from the question, the following data can be derived
Distance between plates=2cm=0.02m
length of plates=4cm=0.04m
initial speed of electron=8*10^6m/s
Note: the speed giving is the speed associated with the horizontal motion since it moves to cover the 4cm distance
we solve the equation component by component.
For the horizontal component, the time it takes to cover distance of 0.04m can be calculated as
[tex]time=\frac{distance }{velocity} \\t=\frac{0.04}{8*10^{6}}\\ t=5*10^{-9}secs[/tex]
this same time is used to cover the vertical distance which is midway between the plate,
Hence vertical distance covered is 0.02/2=0.01m
The acceleration in the vertical component can be calculated as
[tex]y=ut+1/2at^{2}\\u=0,\\y=0.01m\\a=\frac{2y}{t^{2}}\\ a=\frac{2*0.01}{5*10^{-9}}\\ a=8*10^{14}m/s^{2}[/tex]
since
F=qE
also F=ma
then
qE=ma
E=(ma)/q
m=mass of electron=9.1*10^-32kq
q=charge of electron=1.6*10^-19c
a=acceleration
if we substitute values
[tex]E=\frac{9.1*10^{-32}*8*10^{14}}{1.6*10^{-19}} \\E=455N/C[/tex]
To find the magnitude of the electric field when an electron is projected into a uniform electric field between two parallel plates, consider the forces acting on the electron.
An electron is projected horizontally into the uniform electric field directed vertically downward between two parallel plates.
The plates are 2.00 cm apart, and the initial speed of the electron is 8.00 × 10^6 m/s.
To calculate the magnitude of the electric field, you would need to consider the forces acting on the electron as it moves between the plates.
An object is thrown straight up into the air and feels no air resistance. How can the object have an acceleration when it has stopped moving at its highest point?
Answer:
Explanation:
All objects on Earth are subjected to a constant gravitational acceleration g = 9.8m/s2, wherever they are on the surface of Earth and whatever their speed is. So if an object is being thrown to its highest point and stopped moving at that instant, that means the velocity at that instant is 0, not the acceleration. The acceleration is still g = 9.8m/s2
A cube that is 20 nanometer on an edge contains 399,500 silicon atoms, and each silicon atom has 14 electrons and 14 protons. In the silicon we replace 4 silicon atoms with phosphorus atoms (15 electrons and 15 protons/atom), and we replace 7 silicon atoms with boron atoms (5 electrons and 5 protons/atom). How many "holes" are available to carry current at 300K? Holes look like positive mobile carriers. Three significant digits and fixed point notation.
Answer:
Total 3 holes are available for conduction of current at 300K.
Explanation:
In order to develop a semiconductor, two type of impurities can be added as given below:
N-type Impurities: Pentavalent impurities e.g. Phosphorous, Arsenic are added to have an additional electron in the structure. Thus a pentavalent impurity creates 1 additional electron.P-type Impurities: Trivalent impurities e.g. Boron, Aluminium are added to have a positive "hole" in the structure. Thus a trivalent impurity creates 1 hole.Now for estimation of extra electrons in the impured structure is as
[tex]N_{electrons-free}=n_{pentavalent \, atoms}\\N_{electrons-free}=4\\[/tex]
Now for estimation of "holes" in the impured structure is as
[tex]N_{holes}=n_{trivalent \, atoms}\\N_{holes}=7\\[/tex]
Now when the free electrons and "holes" are available in the structure ,the "holes" will be filled by the free electrons therefore
[tex]N_{holes-net}=N_{holes}-N_{electrons-free}\\N_{holes-net}=7-4\\N_{holes-net}=3[/tex]
So total 3 "holes" are available for conduction of current at 300K.
The force, F, of the wind blowing against a building is given by where V is the wind speed, rho the density of the air, A the cross-sectional area of the building, and CD is a constant termed the drag coefficient. Determine the dimensions of the drag coefficient.
Answer:
dimensions of the drag coefficient is [tex][M^0 L^0 T^0][/tex]
Drag coefficient is a dimensionless quantity
Explanation:
force is given by[tex]F=\frac{C_{D} \rho V^2 A}{2}[/tex]
we get expression for drag coefficient [tex]C_{D} =\frac{2F}{\rho V^2 A}[/tex]
By substituting the dimensions of the F,V,A and density , we get
[tex]C_{D} =\frac{[F]}{[\rho ][V]^2[A]} \\C_{D} =\frac{[MLT^{-2}]}{[ML^{-3} ][L T^{-1}]^2[L^2]} \\C_{D} =\frac{[MLT^{-2}]}{[ML^{-3} ][L^2 T^{-2}][L^2]} \\C_{D} =\frac{[MLT^{-2}]}{[MLT^{-2}]}\\C_{D}=[M^0 L^0 T^0][/tex]
Drag coefficient is a dimensionless
The dimensions of the drag coefficient, CD, are kg/m.
Explanation:The dimensions of the drag coefficient, CD, can be determined by examining the equation for force, F, of the wind blowing against a building. In this equation, the dimensions for force are mass x acceleration, which are kg x m/s^2. On the other side of the equation, the wind speed, V, has dimensions of m/s, the density, rho, has dimensions of kg/m^3, and the cross-sectional area, A, has dimensions of m^2. Therefore, in order for the equation to be balanced, the dimensions of the drag coefficient must be kg/m.
Learn more about Drag coefficient here:https://brainly.com/question/31824604
#SPJ3
CP Bang! A student sits atop a platform a distance h above the ground. He throws a large firecracker horizontally with a speed. However, a wind blowing parallel to the ground gives the firecracker a constant horizontal acceleration with magnitude a. As a result, the firecracker reaches the ground directly below the student. Determine the height h in terms of v, a, and g. Ignore the effect of air resistance on the vertical motion.
Answer:
h = v₀ g / a
Explanation:
We can solve this problem using the kinematic equations. As they indicate that the air does not influence the vertical movement, we can find the time it takes for the body to reach the floor
y = [tex]v_{oy}[/tex] t - ½ g t²
The vertical start speed is zero
t² = 2t / g
The horizontal document has an acceleration, with direction opposite to the speed therefore it is negative, the expression is
x = v₀ₓ t - ½ a t²
Indicates that it reaches the same exit point x = 0
v₀ₓ t = ½ a t2
v₀ₓ = ½ a (2h / g)
v₀ₓ = v₀
h = v₀ g / a
An airplane is dropping bales of hay to cattle stranded in a blizzard on the Great Plains. The pilot releases the bales at 150 m above the level ground when the plane is flying at 75 m/s in a direction 55° above the horizontal. How far in front of the cattle should the pilot release the hay so that the bales land at the point where the cattle are stranded?
Answer:
Δx=629.35 m
The pilot release the hay 629.35 m in front of the cattle so that the bales land at the point where the cattle are stranded.
Explanation:
Step 1:
Finding initial velocity components:
Initial velocity=v=75 m/s
α=55
[tex]v_{ox}=vcos\alpha\\v_{ox}=75cos55^o\\v_{ox}=43.018 m/s\\v_{oy}=vsin\alpha\\v_{oy}=75sin55^o\\v_{oy}=61.436 m/s[/tex]
Step 2:
[tex]y_o=150\ m[/tex]
Newton Second Equation:
[tex]y-y_o=v_{oy}t+\frac{1}{2}g t^2[/tex]
g=-9.8 m/s^2 (Downward direction)
[tex]v_{oy}=61.436\ m/s[/tex]
y=0 m
Above equation will become:
-150=(61.436)t-(4.90)t^2
Solving the above quadratic equation we will get:
t=-2.09 sec , t=14.63 sec
t= 14.63 sec
Step 3:
Finding the distance:
Using Again Newton equation of motion in x-direction:
[tex]x-x_o=v_{ox}t+\frac{1}{2}a_{x} t^2[/tex]
Since velocity is constant in x- direction, [tex]a_x[/tex] will be zero.
Above equation will be:
[tex]\Delta x=v_{ox}t[/tex]
Δx=(43.018)(14.63)
Δx=629.35 m
The pilot release the hay 629.35 m in front of the cattle so that the bales land at the point where the cattle are stranded.
The pilot should release the hay at a height of 629.35 m.
Given information,
Initial velocity = 75 m/s
Velocity For x-component,
[tex]\bold {V_0x = Vcos \alpha}\\\\\bold {V_0x = 75 cos 55^o}\\\\\bold {V_0x = 43. 018m/s}[/tex]
Velocity for Y-component
[tex]\bold {V_0y = Vsin \alpha}\\\\\bold {V_0y = 75 sin 55^o}\\\\\bold {V_0y = 61. 43m/s}[/tex]
Using Newton's second equation for y-axis,
[tex]\bold {y-y_0 = V_0t + \dfrac {1}{2} gt^2}[/tex]
Where,
g - gravitational acceleration
put the values in the equation,
[tex]\bold {-150=(61.436)t-(4.90)t^2}[/tex]
Solving this quadratic equation, we get 2 values
t = 14.29 s
To find the distance, use Newton's second equation,
[tex]\bold {x-x_0 = V_0t + \dfrac {1}{2} gt^2}[/tex]
Since acceleration is zero because the velocity is constant in x-axis hence .
So,
[tex]\bold {x-x_0 = V_0_xt }[/tex]
[tex]\bold {x- x_0=(43.018)(14.63)}\\\\\bold {x - x_0=629.35 m}[/tex]
Therefore, the pilot should release the hay at 629.35 m.
To know more about Newton's law, refer to the link:
https://brainly.com/question/3715235
An electric heater has a Nichrome heating element with a resistance of 9 Ω at 20oC. When 112 V are applied, the electric current heats the Nichrome wire to 1090oC. What is the operating wattage of this heater? (The temperature coefficient of resistivity of Nichrome is α = 0.0004 Co-1)
Answer:
975.28 W.
Explanation:
Using,
R' = R(1+αΔt)....................... Equation 1
Where R' = Resistance at the final temperature, R = Resistance at the initial temperature, α = temperature coefficient of resistivity of Nichorome, Δt = Temperature rise.
Given: R = 9 Ω, α = 0.0004/°C, Δt = 1090-20 = 1070 °C
Substitute into equation 1
R' = 9(1+0.0004×1070)
R' = 9(1.428)
R' = 12.862 Ω.
Note: Operating wattage of the heater means the operating power of the heater
The power of the heater is given as,
P = V²/R'...................... Equation 2
Where P = Operating wattage of the heater, V = Voltage, R' = Operating resistance.
Given: V = 112 V, R' = 12.862 Ω
Substitute into equation 2
P = 112²/12.862
P = 975.28 W.
The operating wattage for this heater can be calculated using Ohm's Law, resulting in approximately 1405.33 Watts assuming constant resistance. However, in reality, resistance alters with temperature, reflecting the importance of considering temperature effects in physics.
Explanation:The operating wattage for this electric heater, or the power (P), can be calculated using Ohm's Law where power equals voltage (V) times current (I), or P=IV. Because I = V/R, where R is resistance, the formula can also be written as P = V2/R. With the provided values, we have P = (112V)2 / 9Ω, which gives approximately 1405.33 Watts, assuming that the resistance remains constant over the temperature change.
However, in reality, the resistance changes with temperature according to the equation R = R0[1 + α(T - T0)] where R0 is the original resistance, α is the temperature coefficient of resistivity, T is the final temperature, and T0 is the initial temperature. Considering the provided values and the significant temperature increase, we would need to adjust the resistance for the increased temperature before calculating the power, underlining the importance of temperature effects in practical physics.
Learn more about Ohm's Law here:https://brainly.com/question/33263562
#SPJ3