You are lost at night in a large, open field. Your GPS tells you that you are 122.0 m from your truck, in a direction 58.0o east of south. You walk 72.0 m due west along a ditch. How much farther, and in what direction, must you walk to reach your truck?

Answer:

a. 2.0secs

b. 20.4m

c. 4.0secs

d. 141.2m

e. 40m/s, ∅= -30°

Explanation:

The following Data are giving

Initial speed U=40m/s

angle of elevation,∅=30°

a. the expression for the time to attain the maximum height is expressed as

[tex]t=\frac{usin\alpha }{g}[/tex]

where g is the acceleration due to gravity, and the value is 9.81m/s if we substitute values we arrive at

[tex]t=40sin30/9.81\\t=2.0secs[/tex]

b. the expression for the maximum height is expressed as

[tex]H=\frac{u^{2}sin^{2}\alpha }{2g} \\H=\frac{40^{2}0.25 }{2*9.81} \\H=20.4m[/tex]

c. The time to hit the ground is the total time of flight which is twice the time to reach the maximum height ,

Hence T=2t

T=2*2.0

T=4.0secs

d. The range of the projectile is expressed as

[tex]R=\frac{U^{2}sin2\alpha}{g}\\R=\frac{40^{2}sin60}{9.81}\\R=141.2m[/tex]

e. The landing speed is the same as the initial projected speed but in opposite direction

Hence the landing speed is 40m/s at angle of -30°

Explanation:

(a) It is known that equation for transverse wave is given as follows.

                 y = [tex](0.09 m)sin(\pi \frac{x}{11} + 4 \pi t)[/tex]

Now, we will compare above equation with the standard form of transeverse wave equation,

                 y = [tex]A sin(kx + \omega t)[/tex]

where,    A is the amplitude = 0.09 m

              k is the wave vector = [tex]\frac{\pi}{11}[/tex]

              [tex]\omega[/tex] is the angular frequency = [tex]4\pi[/tex]

              x is displacement = 1.40 m

              t is the time = 0.16 s

Now, we will differentiate the equation with respect to t as follows.

The speed of the wave  will be:

                   v(t) = [tex]\frac{dy}{dt}[/tex]

                v(t) = [tex]A \omega cos(kx + \omega t)[/tex]

        v(t) = [tex](0.09 m)(4\pi) cos(\frac{\pi \times 1.4}{11} + 4 \pi \times 0.16)[/tex]

          v(t) = -0.84 m/s

The acceleration of the particle in the location is

            a(t) = [tex]\frac{dv}{dt}[/tex]

           a(t) = [tex]-A \omega 2sin(kx + \omega t)[/tex]

           a(t) = [tex]-(0.09 m)(4 \pi)2 sin(\frac{\pi \times 1.4}{11} + 4\pi \times 0.16)[/tex]

           a(t) = -9.49 [tex]m/s^{2}[/tex]

Hence, the value of transverse wave is 0.84 m/s and the value of acceleration is 9.49 [tex]m/s^{2}[/tex] .

(b)  Wavelength of the wave is given as follows.

               [tex]\lambda = \frac{2\pi}{k}[/tex]

              [tex]\lambda = (frac{2\pi}{\frac{\pi}{11}) [/tex]

              [tex]\lambda[/tex] = 22 m

The period of the wave is

             T = [tex]\frac{2 \pi}{\omega}[/tex]

             T = [tex]\frac{2 \pi}{4 \pi}[/tex]

                = 0.5 sec

Now, we will calculate the speed of propagation of wave as follows.

                    v = [tex]\frac{\lambda}{T}[/tex]

                       = [tex]\frac{22 m}{0.5 s}[/tex]

                       = 44 m/s

therefore, we can conclude that wavelength is 22 m, period is 0.5 sec, and speed of propagation of wave is 44 m/s.

To find the transverse speed and acceleration of an element on a string given its wave function and specific values for time and position, we differentiate the wave function with respect to time. The first derivative gives us speed, and the second derivative provides acceleration. To determine the wave's wavelength, period, and propagation speed, we compare the wave function to its standard form and use the wave number and angular frequency.

To determine the transverse speed and acceleration of a string element for the given wave function y = (0.090 m) sin (px/11 + 4pt) at t = 0.160 s and x = 1.40 m, we need to take the first and second derivatives of the wave function with respect to time. We also need to convert the given wave function into SI units for consistency.

First, let's tackle the transverse speed, which is given by the first derivative of the displacement y with respect to time t. Acceleration is given by the second derivative with respect to time.

(a) At t = 0.160 s and x = 1.40 m:
Vy = ∂y/∂t = 4p(0.090m)cos(px/11 + 4pt)
Acceleration, ay = ∂^2 y/∂t^2 = -16π^2(0.090m)sin(px/11 + 4pt)

Now plug in the values of x and t to get the numerical measure of speed and acceleration.

(b) To find the wavelength, period, and wave propagation speed, compare the wave function's format to the standard form y(x, t) = A sin (kx - ωt), where k is the wave number related to wavelength (λ) by k = 2π/λ and ω is the angular frequency related to period (T) by ω = 2π/T. The wave speed (v) is given by v = λ/T.

Identify k and ω from the wave function and calculate the wavelength, period, and wave speed.

A constellation, in astronomy, is a conventional grouping of stars, whose position in the night sky is apparently invariable. The peoples, generally of ancient civilizations, decided to link them through imaginary strokes, thus creating virtual silhouettes on the celestial sphere. From 1928, the International Astronomical Union (UAI) decided to officially regroup the celestial sphere into 88 constellations with precise limits, such that every point in the sky would be within the limits of a figure. When an astronomer says he saw a comet in Capricorn last night, it means that he saw a comet in the direction of the constellation of Capricorn.

Answer:

a. [tex]t=19.56 s[/tex]

b.[tex]d=718.34[/tex]

Explanation:

The solution to the differential equation

[tex]\dfrac{dv}{dt}=9.8-\dfrac{v}{5}[/tex]

is the exponential function

[tex]v(t)=ce^{-0.2t}+49[/tex]

and we find [tex]c[/tex] from the initial condition [tex]v(0)=0:[/tex]

[tex]0=ce^{-0.2*0}+49\\\\0=c+49\\\\c=-49[/tex]

Therefore, we have

[tex]v(t)=-49e^{-0.2t}+49[/tex]

[tex]\boxed{ v(t)=49(1-e^{-0.2t})}[/tex]

Part A:

The maximum velocity that the object can reach is 49 (which the maximum value [tex]v(t)[/tex] can have).

Now, 98% of 49 is 48.02; therefore,

[tex]48.02=49(1-e^{-0.2t})[/tex]

[tex]0.98=1-e^{-0.2t}[/tex]

[tex]e^{-0.2t}=0.02[/tex]

[tex]\boxed{t=19.56 s}[/tex]

Part B:

The distance traveled is the integral of the speed:

[tex]d=\int_0^{19.56}v(t)*dt[/tex]

[tex]d=\int^{19.56}_0 {49(1-e^{-0.2t})} \, dt[/tex]

[tex]d=49[t+5e^{-0.2t}]_0^{19.56}[/tex]

[tex]\boxed{d=718.34}[/tex]

To find the time that must elapse for the object to reach 98% of its limiting velocity, we need to solve the differential equation. We can then find the distance the object falls by integrating the velocity function with respect to time.

To find the time it takes for the object to reach 98% of its limiting velocity, we need to solve the differential equation. First, we separate the variables by writing it as:

dv / (9.8 - (v/5)) = dt

Next, we integrate both sides:

∫ (1 / (9.8 - (v/5))) dv = ∫ dt

After evaluating the integrals, we can solve for v:

v = 49 - 49e^(-t/5)

Substituting v with 0.98 times the limiting velocity (which is 49), we can solve for t:

49 - 49e^(-t/5) = 0.98 * 49

Solving this equation will give us the time it takes for the object to reach 98% of its limiting velocity.

To find the distance the object falls, we need to integrate the velocity function, v, with respect to time:

∫ v dt

By evaluating the integral, we can calculate the distance the object falls in the time found in part (a).

https://brainly.com/question/33814182

#SPJ3

Answer:

i. +/- 1.43% and +/- 0.71% ii. +/- 0.33%

Explanation:

[tex]% Error = \frac{Error}{Measurement}* 100%\\[/tex]

Answer:

W = 34.64 ft-lbs

Explanation:

given,

Horizontal force = 4 lb

distance of push, d = 10 ft

angle of ramp, θ = 30°

Work done on the box = ?

We know,

W = F.d cos θ

W = 4 x 10 x cos 30°

W = 40 x 0.8660

W = 34.64 ft-lbs

Hence, work done on the box is equal to W = 34.64 ft-lbs

Final answer:

The work done on the box by the woman as she pushes it up the ramp with a horizontal force of 4 pounds is 34.64 foot-pounds, using the work calculation with the cosine of the ramp's angle. So, the final answer is 34.64 foot-pounds.

Explanation:

To calculate the work done on a box by a woman pushing it up a ramp, we need to use the formula Work = Force  * Distance *cos(Ф), where Ф is the angle of the applied force relative to the direction of motion. Since the woman is exerting a horizontal force and the ramp is inclined at a 30-degree angle, the work done is the horizontal component of the force times the distance moved up the ramp.

In this scenario, the force is 4 pounds and the distance is 10 feet. The angle Ф the force makes with the displacement is 30 degrees as the ramp is inclined at this angle to the horizontal, and the force is horizontal. Therefore, the work done is calculated as:

Work = 4 lbs*10 ft *cos(30 degrees)

Using the cosine of 30 degrees (approximately 0.866), the calculation simplifies to:

Work = 4 lbs*10 ft*0.866

Work = 34.64 foot-pounds

Answer:

Due to a larger number of electrons in the heavy atoms.

Explanation:

Spectral lines are caused by the emission of light by electrons when they transit from a higher energy state(excited state) to a lower energy state.

Hence, the more electrons an atom has, the more the emission and spectral lines. The less the electrons an atom has, the less the emission and spectral lines.

Therefore, heavy nuclei (which contain more electrons) such as Iron will emit more light and so will have more spectral lines than light atoms like Hydrogen and Helium.

Answer:

more electrons in heavy atoms

Explanation:

Using the physics equation of motion and the given initial velocity, reaction time, and deceleration, one can determine whether a truck can stop in time to avoid a collision.

The question focuses on stopping distance and acceleration required to avoid a collision, indicating its base in Physics. If we have a truck moving at a constant velocity and it brakes at a certain distance from an obstacle, the minimum acceleration needed to avoid a collision can be calculated using the equation of motion v^2 = u^2 + 2as. Here, 'v' is the final velocity (0 m/s as the truck needs to stop), 'u' is the initial velocity, 'a' is the acceleration, and 's' is the distance over which the truck needs to stop.

To determine if the truck will hit the child, we must account for the driver's reaction time as well. During this reaction time, the truck continues to travel at its initial speed. After the reaction time, the truck will begin decelerating until it comes to a stop. The total stopping distance is the distance covered during the reaction time plus the distance covered during deceleration. The latter can be found using the deceleration rate and the formula mentioned above.

For the given scenario of the truck with an initial velocity of 10 m/s, a braking distance of 50 m, reaction time of 0.5 seconds, and deceleration of -1.25 m/s^2, we can calculate whether or not the truck will be able to stop in time to avoid hitting the child.

Answer:

t= 0.00364 in

Explanation:

Given that

The volume of the paint ,V= 231 in³

The surface area ,A = 440 ft²

We know that

1 ft  = 12 in

That is why

A= 440 x 12 x 12 in²

A= 63360 in²

Lets take the thickness of the paint = t in

We know that

V= A t

[tex]t=\dfrac{V}{A}[/tex]

[tex]t=\dfrac{231}{63360}\ in[/tex]

t= 0.00364 in

Therefore the thickness ,t= 0.00364 in

To find the average thickness of the paint, divide the volume of paint by the area covered. This results in an average thickness of approximately 0.003645 inches, or about 0.000304 feet when the paint is applied as per the can's instructions.

To find the average thickness of the paint applied, we need to calculate the volume of paint used per unit of area covered. The volume of one gallon of paint is 231 cubic inches, and the coverage is 440 square feet. To convert the coverage to square inches, we multiply by the number of square inches in a square foot, which is 144 (12 inches × 12 inches).

The total coverage in square inches is 440 ft2 × 144 in2/ft2 = 63,360 in2. We can then find the average thickness by dividing the volume of paint by the area covered: Thickness (in inches) = Volume (in cubic inches) / Area (in square inches).

This gives us an average thickness of 231 in3 / 63,360 in2, which simplifies to approximately 0.003645 inches. This can also be converted to feet by knowing that 1 inch is equal to 1/12 of a foot, so the average paint thickness is roughly 0.003645/12 feet when applied as instructed on the paint can.

The largest telescope currently used is the Gran Telescopio Canarias, (also known as GTC or GRANTECAN). It is 10.4m in diameter, slightly larger than the Keck telescopes in Hawaii.

The telescope observes the visible and infrared light coming from space and has a primary mirror of 10.4 meters, segmented into 36 hexagonal glass-ceramic pieces, 1.9 m between vertices, 8 cm thick, and 470 kg of mass each. The optical system is completed with two mirrors (secondary and tertiary) that form an image in seven focal stations.

Optically the diameter directly influences the magnification of the image. This added to the fact that astronomical objects are quite far away, a telescope of this magnitude allows to obtain more precise images of what is observed in space

Answer: at when distance r = infinity.

Explanation: The formulae for the electric potential of an electric charge to an arbitrary point is given by the formulae below

V = q/4πεr

V = electric potential (volts)

q = magnitude of electric charge

ε = permittivity of free space

r = distance between arbitrary point and charge.

In the equation above, it can be seen that only electric potential (v) and distance (r) is a variable, and there is an inverse relationship between them (an increase in one leads to a decrease in the other)

Thus to have zero value of electric potential (v= 0) we have to have the largest value of r ( r = infinity).

Same goes for electric potential energy between two charges, the formulae is given below as

W = q1 *q2/4πεr

W= electric potential energy

q1 = magnitude of first charge.

q2 = magnitude of second charge

ε = permittivity of free space

r = distance between arbitrary point and charge.

Also, all values are constant aside from electric potential energy (w) and distance (r) which have an inverse relationship.

Thus to have zero value of electric potential energy (w =0), we have to get an infinite value of distance ( r =infinity)

The jet's acceleration is calculated as 7.14 m/s² using a kinematic equation. This value is reasonable for a jet plane given its powerful engines. High-speed aircraft often have high accelerations.

To determine the jet's acceleration, we can apply the kinematic equation:

vf² = vi² + 2aΔx

where:

Solving for acceleration a:

400² = 300² + 2a(4900)

160000 = 90000 + 9800a

70000 = 9800a

a = 7.14 m/s²

Reasonableness of the Answer

Yes, the answer is reasonable. Accelerations for jet planes are typically high due to the powerful engines they possess. An acceleration of 7.14 m/s² aligns well with the capabilities of high-speed aircraft.

For all solutions the answer is NO. And this is easily intuited because for the three conditions there is the dependence of the mass against some physical property of movement. Both bodies do not have the same mass.

In the case of Inertia, it is understood that it is the tendency of an object to resist change and is mass dependent. The object with greater mass will tend to resist change. Since the mass of the bowling ball is greater than the base ball, the bowling ball has greater inertia compared to the base ball.

For the second part, remember that force, according to Newton's second law, is defined as the product between mass and acceleration, so the bowling ball will accelerate less by having a greater mass.

Finally, momentum is defined as the product between mass and velocity. The mass is greater than one of its objects even though the speeds are the same. Therefore, the momentum of the bowling ball is greater than the momentum of baseball.

In space, the baseball has less inertia, greater acceleration, and less momentum compared to the bowling ball when both receive an equal push, due to their differences in mass.

The question relates to the concept of inertia, acceleration, and momentum in physics. When the astronaut in space gives an equal push to a baseball and a bowling ball, the baseball does not have the same inertia as the bowling ball, because inertia is a measure of an object's resistance to changes in its state of motion and is directly proportional to the object's mass. Since the bowling ball has a greater mass than the baseball, it has more inertia.

As a result, the baseball will have a greater acceleration than the bowling ball from the same force, due to Newton's second law of motion (F=ma), which states that force equals mass times acceleration. If we consider both balls traveling at the same speed, the baseball will not have the same momentum as the bowling ball, because momentum is the product of mass and velocity (p=mv), and the bowling ball has a greater mass.

Explanation:

Formula for the change in potential energy from point A to B is as follows.

           P.E = [tex](V_{A} - V_{B}) \times q[/tex]

Putting the given values into the above formula as follows.

          P.E = [tex](V_{A} - V_{B}) \times q[/tex]

                 = [tex](5650 - 7850) \times 5 \times 10^{-5}[/tex]

                 = -0.11 J

Now, we will calculate the change in kinetic energy as follows.

            K.E = [tex]0.5 \times m \times (v^{2}_{B} - v^{2}_{A})[/tex]

                  = [tex]0.5 \times 6.90 \times 10^{-2} \times (2^{2} - 1^{2})[/tex]

                  = 0.1035 J

Therefore, supplied difference by the outside force is calculated as follows.

           0.1035 J - (-0.11) J

          = 0.2135 J

Thus, we can conclude that work is done by the outside force in moving the particle from A to B is 0.2135 J.

The total work done by the external force in moving the charged particle from equipotential surface A to B is 1.194 J.

The work done by an external non-conservative force in moving a charged particle from one equipotential surface to another can be calculated in two parts. Firstly, we calculate the difference in electrical potential energy between the two points. This can be calculated using the formula ΔU = qΔV, where ΔV = Vb - Va. Following the given question, q = +5.35 x 10^-5 C, ΔV = 7850V - 5650V. Therefore, ΔU = 5.35 x 10^-5(7850 - 5650) = 1.1765 J.

Secondly, we calculate the change in kinetic energy which is given by ΔK = ½m(vb² - va²), where m = 6.90 x10^-2 kg, va = 2 m/s, and vb = 3 m/s. Therefore, ΔK = 0.5 * 6.90 x10^-2 * (3^2 - 2^2) = 0.0175 J.

Summing both gives the total work done by the external force on the particle: W = ΔU + ΔK = 1.1765 J + 0.0175 J = 1.194 J.

https://brainly.com/question/32059694

#SPJ11

Answer:

Acceleration will be [tex]\alpha =-1.50rad/sec^2[/tex]

Explanation:

We have given initial angular velocity [tex]\omega _i=37rpm[/tex]

In radian/sec initial angular velocity will be [tex]\omega _i=\frac{2\times \pi 37}{60}=3.873rad/sec[/tex]

Angular velocity after 1.6 sec is 14 rpm

So final angular velocity [tex]\omega _f=\frac{2\times \pi\times 14}{60}=1.465rad/sec[/tex]

Time t = 1.6 sec

We have to find the angular angular acceleration

From first equation of motion we know that

[tex]\omega _f=\omega _+\alpha t[/tex]

[tex]1.465=3.873+\alpha \times 1.6[/tex]

[tex]\alpha =-1.50rad/sec^2[/tex] here negative sign indicates that motion is deaccelerative in nature

Answer:

3.33m/s

Explanation:

The total distance that he runs is

30m north + 30m south + 40m north = 100 m

If the entire run takes 30 seconds then the average speed is distance over a unit of time

100 / 30 = 3.33 m/s

You can draw a sketch of a line going north 2 spaces, then going south by 3 spaces, finally going north again by 4 spaces

Answer:

Explanation:

Given

side of square shape [tex]a=5\ cm[/tex]

Electric flux [tex]\phi =3\times 10^{-5}\ N.m^2/C[/tex]

Permittivity of free space [tex]\epsilon_0=8.85\times 10^{-12} \frac{C^2}{N.m^2}[/tex]

Flux is given by

[tex]\phi =EA\cos \theta [/tex]

where E=electric field strength

A=area

[tex]\theta [/tex]=Angle between Electric field and area vector

[tex]E=\frac{\phi }{A\cos (0)}[/tex]

[tex]E=\frac{3\times 10^{-5}}{25\times 10^{-4}\times \cos(0)}[/tex]

[tex]E=0.012\ N/C[/tex]

and Electric field  by a uniformly charged sheet is given by

[tex]E=\frac{\sigma }{2\epsilon_0}[/tex]

where [tex]\sigma[/tex]=charge density

[tex]=\frac{\sigma }{\epsilon_0}[/tex]

[tex]\sigma =0.012\times 8.85\times 10^{-12}[/tex]

[tex]\sigma =2.12\times 10^{-13}\ C/m^2[/tex]    

Answer : Yes, theoretical density can be computed from a tiny fundamental unit using the formula [tex]\rho=\frac{Z\times M}{N_{A}\times a^{3}}[/tex].

Explanation :

Nearest neighbor distance, r = [tex]0.124nm=1.24\times 10^{-8}cm[/tex] [tex](1nm=10^{-7}cm)[/tex]

Atomic mass (M) = 55.85 g/mol

Avogadro's number [tex](N_{A})=6.022\times 10^{23} mol^{-1}[/tex]

For BCC = Z = 2

Given density = [tex]7.87g/cm^3[/tex]

First we have to calculate the cubing of edge length of unit cell for BCC crystal lattice.

For BCC lattice : [tex]a^3=(\frac{4r}{\sqrt{3}})^3=(\frac{4\times 1.24\times 10^{-8}cm}{\sqrt{3}})^3=2.35\times 10^{-23}cm^3[/tex]

Now we have to calculate the density of unit cell for BCC crystal lattice.

Formula used :  

[tex]\rho=\frac{Z\times M}{N_{A}\times a^{3}}[/tex] .............(1)

where,

[tex]\rho[/tex] = density

Z = number of atom in unit cell (for BCC = 2)

M = atomic mass

[tex](N_{A})[/tex] = Avogadro's number  

a = edge length of unit cell

Now put all the values in above formula (1), we get

[tex]\rho=\frac{2\times (55.85g/mol)}{(6.022\times 10^{23}mol^{-1}) \times (2.35\times 10^{-23}Cm^3)}=7.89g/Cm^{3}[/tex]

From this information we conclude that, the given density is approximately equal to the given density.

Yes, theoretical density can be computed from a tiny fundamental unit using the formula [tex]\rho=\frac{Z\times M}{N_{A}\times a^{3}}[/tex].

To solve this problem we will apply the conversion rate between Celcius and Fahrenheit degrees. We will use the direct relationship clearly and not the added degrees of scale conversion. We know from the statement that the orange loses heat at the rate of

[tex]Q = 1.2kJ/\°C[/tex]

We have the conversion to °F is given as

[tex]T (\°F) = 1.8T+32[/tex]

Calculate the amount of heat loss from orange per °F

[tex]Q = \frac{1.2}{1.8}[/tex]

[tex]Q = 0.667kJ/\°F[/tex]

Therefore the amount of heat loss from the orange per °F drop in its temperature is 0.667kJ/°F

The heat loss from an orange per °F drop is 0.67 kJ, calculated by taking 1.2 kJ per °C drop and dividing it by 1.8 to convert it to Fahrenheit,

The heat loss from the orange per °F drop in its temperature can be found by converting 1.2 kJ lost per 1 °C drop in temperature to kJ lost per 1 °F drop. This can be achieved using the formula that 1 °C equals 1.8 °F.

Therefore, the heat loss per degree Fahrenheit will be less than the heat loss per degree Celsius. We calculate this as follows:
(1.2 kJ / °C) / 1.8 = 0.67 kJ per °F.

So for every degree Fahrenheit that the orange cools, it will lose 0.67 kilojoules of heat.

https://brainly.com/question/31857421

#SPJ3

Answer:

a)   F = 1.44 10⁻⁷ N, the charges are of the same sign the force is repulsive

b)    F₂ / F₁ = 16

Explanation:

a) When the balls are touched the load is distributed evenly between the two balls, therefore when separating each ball has a load of

          q₁ = q₂ = ½ 10¹⁰ 1.6 10⁻¹⁹ C

          q₁ = q₂ = 0.8 10⁻⁹ C

As the charges are of the same sign the force is repulsive

To calculate the force let's use Coulomb's law

        F = k q₁ q₂ / r²

        F = 8.99 10⁹  0.8 10⁻⁹  0.8 10⁻⁹ / 0.20²

        F = 1.44 10⁻⁷ N

b) Let us seek strength for the distress of

              r₂ = 0.05 m

             F₂ = 8.99  10⁹ 0.8 0.8 10⁻¹⁸ / 0.05²

             F₂ = 2,301 10⁻⁶ N

b) The relationship between these two forces is

            F₂ / F₁ = 23.01 10⁻⁷ / 1.44 10⁻⁷

            F₂ / F₁ = 16

Answer:

Explanation:

Given

Distance between Pluto and sun is 39.1 times more than the distance between earth and sun

According to Kepler's Law

[tex]T^2=kR^3[/tex]

where k=constant

T=time period

R=Radius of orbit

Suppose [tex]R_1[/tex] is the radius of orbit of earth and sun

so Distance between Pluto and sun is [tex]R_2=39.1\cdot R_1[/tex]

[tex]T_1[/tex] and [tex]T_2[/tex] is the time period corresponding to [tex]R_1[/tex] and R_2[/tex]

[tex](T_1)^2=k(R_1)^3---1[/tex]

[tex](T_2)^2=k(R_2)^3---2[/tex]

divide 1 and 2

[tex](\frac{365}{T_2})^2=(\frac{R_1}{39.1})^3[/tex]

[tex]T_2^2=365^2\times 39.1^3[/tex]

[tex]T_2=89239.67\ Earth\ days[/tex]                      

Final answer:

Using Kepler's Third Law of Planetary Motion, we can calculate that it takes Pluto approximately 92,446 Earth days to complete one orbit around the Sun.

Explanation:

To calculate the time taken by Pluto to orbit the Sun, we use Kepler's Third Law of Planetary Motion, which states that the square of the orbital period of a planet is directly proportional to the cube of the semi-major axis of its orbit. Given that the distance between Pluto and the Sun is approximately 39.1 times more than the distance between the Earth and the Sun, we could simplify and use the approximation that Pluto's distance in astronomical units (AU) is roughly 40, as given in the reference information.

Pluto's orbital period (P) can be calculated using the average distance from the Sun (a) with the formula P² = a³. Here, we assume Earth's orbital period to be 1 Earth year and its distance as 1 AU by definition. Therefore, for Pluto:

To convert this period into Earth days, we multiply by the number of days in one Earth year (365.25 days, accounting for the leap year cycle):

Hence, it takes Pluto approximately 92,446 Earth days to complete one orbit around the Sun.

Answer with Explanation:

We are given that

x=-2.6 cm to x=2.6 cm

Linear charge density=[tex]\lambda=5.5nC/m=5.5\times 10^{-9} C/m[/tex]

[tex]1nC=10^{-9} C[/tex]

Length of wire=[tex]2.6-(-2.6)=2.6+2.6=5.2cm[/tex]

Length of wire=[tex]\frac{5.2}{100}=0.052m[/tex]

1 m=100 cm

We know that

a.Linear charge density=[tex]\frac{Q}{L}[/tex]

Where Total charge =Q

Length=L

Total charge,Q=[tex]\lambda L[/tex]

Using the formula

Total charge,Q=[tex]5.5\times 10^{-9}\times 0.052=2.86\times 10^{-10}C[/tex]

b.y=4 cm=[tex]\frac{4}{100}=0.04m[/tex]

1 m=100 cm

Electric field on the y-axis is given by

[tex]E=\frac{2\lambda}{4\pi\epsilon_0 y}(\frac{L}{\sqrt{4y^2+L^2}}[/tex]

[tex]\frac{1}{4\pi\epsilon_0}=9\times 10^9 Nm^2/C^2[/tex]

Using the formula

[tex]E=\frac{2\times 5.5\times 10^{-9}\times 9\times 10^9\times 0.052}{0.04\times \sqrt{4(0.04)^2+(0.052)^2}}[/tex]

[tex]E=1348.8N/C[/tex]

c.y=12 cm=[tex]\frac{12}{100}=0.12m[/tex]

Using the formula

[tex]E=\frac{2\times 5.5\times 10^{-9}\times 9\times 10^9\times 0.052}{0.12\times \sqrt{4(0.12)^2+(0.052)^2}}[/tex]

[tex]E=174.7N/C[/tex]

To find the total charge of the uniform line charge, multiply the linear charge density by the length of the line. To find the electric field at a certain distance on the y axis, use the formula for electric field due to a line charge.

(a) To find the total charge of the line, we need to multiply the linear charge density by the length of the line:

Charge = (Linear charge density)*(Length)

Convert the length to meters:

Length = (2.6 cm + 2.6 cm) = 0.052 m

Total Charge = (5.5 nC/m)*(0.052 m) = 0.286 nC

(b) To find the electric field at y = 4 cm, we can use the formula:

Electric Field = (Linear charge density)/(2πε₀y)

Convert the linear charge density to C/m:

Charge density = 5.5 nC/m = 5.5 x 10-9 C/m

Electric Field = (5.5 x 10-9 C/m)/(2πε₀(0.04 m))

(c) To find the electric field at y = 12 cm, we can use the same formula:

Electric Field = (5.5 x 10-9 C/m)/(2πε₀(0.12 m))

Answer:

Power delivered by the source will be 182.912 watt

Explanation:

We have given a load is consist of a resistor of 70 ohm in parallel with [tex]90\mu F[/tex] capacitance

Voltage source is given [tex]v_s(t)=160cos(2000t)[/tex]

So maximum value of voltage source is 160 volt

So rms value [tex]v_{r}=\frac{v_m}{\sqrt{2}}=\frac{160}{1.414}=113.154volt[/tex]

We know that average power delivered by the source will be equal to average power absorbed by the resistor

So power absorbed by the resistor [tex]P=\frac{v_r^2}{R}=\frac{113.154^2}{70}=182.912watt[/tex]

So power delivered by the source will be 182.912 watt

Answer:

32.9242311983 m/s

1.40506567727g

35.3405770759 rpm

Explanation:

v = Linear Velocity of the capsule

[tex]a_c[/tex] = Centripetal acceleration = [tex]12.5g=12.5\times 9.81[/tex]

r = Radius of the centrifuge = 8.84 m

l = Person's height = 2 m

Centripetal acceleration is given by

[tex]a_c=\frac{v^2}{r}\\\Rightarrow v=a_cr\\\Rightarrow v=\sqrt{12.5\times 9.81\times 8.84}[/tex]

The linear speed of the capsule is 32.9242311983 m/s

The radius would be

[tex]r=\sqrt{r^2+\dfrac{l^2}{4}}\\\Rightarrow r=\sqrt{8.84^2+\dfrac{2^2}{4}}\\\Rightarrow r=8.89638128679\ m[/tex]

The centripetal acceleration

[tex]a_{c2}=\dfrac{32.9242311983^2}{8.89638128679\times 9.81}g\\\Rightarrow a_{c2}=12.4207805891g[/tex]

Change in acceleration from Pythagoras law

[tex]a=\sqrt{a_{ch}^2-a_{c2}^2}\\\Rightarrow a=\sqrt{12.5^2g^2-12.4207805891^2g^2}\\\Rightarrow a=1.40506567727g[/tex]

The difference is 1.40506567727g

Velocity

[tex]v=\omega r\\\Rightarrow v=2\pi Nr\\\Rightarrow N=\dfrac{v}{2\pi r}\\\Rightarrow N=\dfrac{32.9242311983}{2\pi 8.89638128679}\\\Rightarrow N=0.589009617932\ rev/s[/tex]

[tex]N=0.589009617932\times 60=35.3405770759\ rpm[/tex]

The speed is 35.3405770759 rpm

Answer:

0.0458 kWh

6.5736 cents

Explanation:

The formula for electric energy is given as

E = Pt................. Equation 1

Where E = Electric energy, P = Electric power, t = time.

Given; P = 550 W, t = 5 min = (5/60) h = 0.083 h.

Substituting into equation 1

E = 550(0.083)

E = 45.83 Wh

E = (45.83/1000) kWh

E = 0.0458 kWh.

Hence the kWh = 0.0458 kWh.

If the makes a toast four morning per week, and the are Four weeks in a month.

Total number days he makes toast in a month = 4×4 = 16 days.

t = 16×0.083 h = 1.328 h.

Total energy used in a month = 550(1.328)

E = 730.4 Wh

E = 0.7304 kWh.

If the cost of energy is 9.0 cents per kWh,

Then for 0.7304 kWh  the cost will be 9.0(0.7304) = 6.5736 cents.

Hence this would add 6.5736 cents to his monthly electric bill

A 550-W toaster in operation for 5.0 minutes uses 2.75 kWh of energy. If you make toast four mornings per week, it would add an estimated cost of $4.30 to your monthly electric energy bill.

To calculate the energy used by the toaster, we can use the formula E = Pt, where P is the power and t is the time. In this case, the power of the toaster is 550 watts and the time it is in operation is 5.0 minutes. Plugging these values into the formula, we get E = (550 W)(5.0 min) = 2750 W.min. To convert this to kilowatt-hours (kWh), we need to divide by 1000, so the energy used by the toaster is 2.75 kWh.

To estimate how much this would add to your monthly electric energy bill, we need to know how many times you use the toaster in a month. If you use it four mornings per week, that would be 4 days x 52 weeks / 12 months = 17.33 days per month. Multiplying the energy used by the toaster (2.75 kWh) by the number of days in a month (17.33), we get an estimate of 47.75 kWh per month. Finally, to find the cost, we multiply the energy (47.75 kWh) by the cost per kilowatt-hour (9.0 cents/kWh) and convert it to dollars, giving us an estimated cost of $4.30 per month.

https://brainly.com/question/15569623

#SPJ3

Final answer:

To find where the electric field is zero between two point charges (5.0 μC and -4.0 μC), set up an equation based on Coulomb's Law and solve it considering that the point lies closer to the smaller magnitude charge.

Explanation:

The question requires the application of concepts from electrostatics, specifically the properties of the electric field generated by point charges. To determine the point at which the electric field is zero, one must consider the magnitudes of the charges and their distances from the point of interest. Since electric fields generated by individual charges superpose, the point where the electric field is zero is where the electric field due to one charge balances out the electric field due to the other charge.

For two charges Q1 (+5.0 μC) and Q2 (-4.0 μC) separated by 50 cm (0.5 meters), the electric field is zero at a point that is closer to the smaller magnitude charge. Let's call the distance from Q1 to the point where the field is zero 'd'. Using Coulomb's Law and the concept of superposition, we can set up the equation:

E1 = E2
|k * Q1 / d^2| = |k * Q2 / (0.5 - d)^2|
|Q1/d^2| = |Q2/(0.5 - d)^2|

Substituting Q1 and Q2 with their respective values, we can solve for 'd' using algebraic methods to find the point on the meter stick where the electric field equals zero. However, since the solution requires calculations, it is important to apply the proper mathematical steps to reach the correct conclusion.

Answer:

After 1.938 sec velocity of rock will be 36 m/sec

Explanation:

We have given initial velocity at which rock is thrown u = 55 m/sec

Final velocity v = 36 m/sec

Acceleration due to gravity [tex]g=9.8m/sec^2[/tex]

According to first equation of motion we know that [tex]v=u+gt[/tex], here v is final velocity, u is initial velocity, g is acceleration due to gravity and t is time

So [tex]36=55-9.8t[/tex] ( Negative sign is due to rock is thrown upward )

So [tex]9.8t=19[/tex]

t = 1.938 sec

So after 1.938 sec velocity of rock will be 36 m/sec

Answer:

Q= 22.3 μC

Explanation:

Given that

C= 20 μF

Qo= 100 μC

R= 100 kΩ

t= 3 s

T= R C

T= 100 x 1000 x 20 x 10⁻⁶ s

T=2 s

We know that charge on the capacitor is given as

[tex]Q=Q_0e^{\dfrac{-t}{T}}[/tex]

[tex]Q=100\times 10^{-6}\times e^{\dfrac{-3}{2}}[/tex]

Q= 0.0000223 C

Q= 22.3 μC

Final answer:

The charge remaining on the capacitor after 3 seconds of discharging is approximately 22.31 µC, calculated using the formula for exponential decay of charge in an RC circuit.

Explanation:

To calculate the charge remaining on a 20 µF capacitor after 3 seconds of discharging through a 100 kΩ resistor, we'll use the formula for exponential decay of charge in an RC circuit, which is Q(t) = Q0 e-(t/RC), where Q0 is the initial charge, t is the time, and RC is the time constant of the circuit. The time constant (RC) for this circuit can be calculated as (100 × 103 Ω)(20 × 10-6 F) = 2 seconds. Plugging in the given values, we find that Q(3s) = 100 µC × e-(3/2), which after calculation gives a remaining charge of approximately 22.31 µC.

Answer:

The radius of the curve that Car 2 travels on is 380 meters.

Explanation:

Speed of car 1, [tex]v_1=65\ km/h[/tex]

Radius of the circular arc, [tex]r_1=95\ m[/tex]

Car 2 has twice the speed of Car 1, [tex]v_2=130\ km/h[/tex]

We need to find the radius of the curve that Car 2 travels on have to be in order for both cars to have the same centripetal acceleration. We know that the centripetal acceleration is given by :

[tex]a=\dfrac{v^2}{r}[/tex]

According to given condition,

[tex]\dfrac{v_1^2}{r_1}=\dfrac{v_2^2}{r_2}[/tex]

[tex]\dfrac{65^2}{95}=\dfrac{130^2}{r_2}[/tex]

On solving we get :

[tex]r_2=380\ m[/tex]

So, the radius of the curve that Car 2 travels on is 380 meters. Hence, this is the required solution.

Final answer:

For Car 2 to have the same centripetal acceleration while traveling at twice the speed of Car 1, it must travel on a curve with a radius that is four times larger, which would be 380 meters.

Explanation:

The centripetal acceleration (ac) of a car going around a level curve at a constant speed is given by the formula ac = v2 / r, where v is the speed of the car and r is the radius of the circular path. If Car 1 is traveling at 65 km/h and has a centripetal acceleration on a curve with a radius of 95 m, and Car 2 is traveling at twice the speed of Car 1, we are asked to find the required radius of the curve for Car 2 to maintain the same centripetal acceleration.

To keep the same centripetal acceleration for Car 2, which is moving at twice the speed, the radius r2 must be increased proportionally to the square of the speed ratio. Since Car 2 is traveling at twice the speed, the radius must be increased by a factor of 22, or 4 times larger than that for Car 1. Therefore, if Car 1's radius is 95 m, Car 2's radius needs to be 95 m * 4, which is 380 m.

Answer:

The fox leaves the snow at 3.99 m/s

Explanation:

Hi there!

The equation of height and velocity of the fox are the following:

h = h0 + v0 · t + 1/2 · g · t²

v = v0 + g · t

Where:

h = height of the fox at a time t.

h0 = initial height.

v0 = initial velocity.

t = time.

g = acceleration due to gravity (-9.81 m/s considering the upward direction as positive)

v = velocity of the fox at a time t.

We know that at the maximum height of the fox, its velocity is zero, so using the equation of velocity we can obtain an expression of v0 in function of t:

v = v0 + g · t

At the maximum height, v = 0

0 = v0 + g · t

Solving for v0:

-g · t = v0

We know the maximum height of the fox, 0.810 m. So, using the equation of height and replacing v0 by (-g · t), we can obtain the time at which the fox is at the maximum height and then calculate the initial velocity:

h = h0 + v0 · t + 1/2 · g · t²

When t is the time at which the fox is at the maximum height, h = 0.810 m and v0 = (-g · t). Let´s consider the ground as the origin of the frame of reference so that h0 = 0.

0.810 m = (-g · t) · t + 1/2 · g · t²

0.810 m = -g · t² +  1/2 · g · t²

0.810 m = - 1/2 · g · t²

t² = -2 · 0.810 m / -9.81 m/s²

t = 0.406 s

And the initial velocity will be:

v0 = -g · t

v0 = -(-9.81 m/s²) · 0.406 s

v0 = 3.99 m/s

The fox leaves the snow at 3.99 m/s

The speed at which the fox leaves the snow is approximately 4.52 m/s.

To calculate the speed at which the fox leaves the snow, we can use the principle of conservation of energy. Since the fox jumps straight up, its initial vertical velocity is zero. The final velocity can be calculated using the equation v^2 = u^2 + 2as, where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the displacement. In this case, the displacement is the height jumped, which is 81.0 cm or 0.81 m. The acceleration is equal to g, the acceleration due to gravity (approximately 9.8 m/s^2). Solving for v, we find that the speed at which the fox leaves the snow is approximately 4.52 m/s.