why is DNA an important molecule in the cell?

Answers

Answer 1
DNA holds all the genetic information for a cell. It helps with basically all cell processes.
Answer 2

DNA is a fundamental molecule in the cell, storing genetic information, guiding protein synthesis, and ensuring proper cell division. It acts as a blueprint for all cellular structures and functions.

Why is DNA an Important Molecule in the Cell?

DNA (deoxyribonucleic acid) is the cornerstone of cellular structure and function, providing the necessary instructions for the development, functioning, and reproduction of all living organisms. It's not only responsible for storing genetic information but also plays a crucial role in cell division and the synthesis of molecules needed by the cell, particularly proteins. The replication of DNA is fundamental during the cell cycle and is performed in a semiconservative manner, ensuring that each new cell receives an exact copy of the DNA.

The information encapsulated in the DNA dictates the structure and physiology of the cell by determining which proteins are made. This is achieved through a process called gene expression, where the genetic code in DNA is translated into proteins. Proteins, including enzymes, are pivotal in a wide array of cellular functions such as metabolic processes, DNA replication, and cellular structure. Hence, DNA essentially acts as a blueprint for cellular activities and enables the orderly growth and maintenance of tissues and organismal structures.

Mutations can occur if there are failures in the checkpoints of the cell cycle that monitor DNA integrity. Therefore, DNA is not only integral for normal cellular operations but also plays a significant role in ensuring the stability of the organism's genetic makeup across generations.


Related Questions

Which of the following is a pure substance? Pure gold, pure milk, pure water, pure seawater, pure sand. And how do you know?

Answers

Pure substances are made of almost the same materials and have the same properties such as: Water, Sugar, Salt, Nitrogen Gas, Iorn, Carbon and Oxygen Gas.
the one that is a pure substance is : Pure Gold

The other substance couldn't be categorized as 'pure substance' because they don't have definite and constant composition

hope this helps

The distance between two corresponding parts of a wave is the wave's

Answers

that would be the e
waves wave length

A book is sitting on the table at rest. The forces acting on the book include _______, and these forces are _______.
A.
gravity pushing up and friction pushing to the right; balanced

B.
gravity pushing down and the table pushing up; unbalanced

C.
gravity pushing down and the table pushing up; balanced

D.
gravity pushing up and friction pushing to the right; unbalanced

Answers

c. this is the real answer lol


Final answer:

A book is sitting on the table at rest. The forces acting on the book include gravity pushing up and friction pushing to the right, and these forces are balanced. So the correct option is C.

Explanation:

The force acting on a book sitting at rest on a table is gravity pushing down and the table pushing up with a normal force. Since the book is at rest, these forces must be equal in magnitude but opposite in direction, and therefore they are balanced. Option C, gravity pushing down and the table pushing up; balanced, is the correct answer. The force of gravity is also known as the book's weight, and since the book is not accelerating, the normal force must be equal to the gravitational force to maintain equilibrium, according to Newton's first law of motion.

which part of the mantle is still solid but flows like a heavy liquid

Answers

The Earth is composed of four different layers. Many geologists believe that as the Earth cooled the heavier, denser materials sank to the center and the lighter materials rose to the top. Because of this, the crust is made of the lightest materials (rock- basalts and granites) and the core consists of heavy metals (nickel and iron).

 

The crust is the layer that you live on, and it is the most widely studied and understood. The mantle is much hotter and has the ability to flow. The Outer and Inner Cores are hotter still with pressures so great that you would be squeezed into a ball smaller than a marble if you were able to go to the center of the Earth!!!!!!

How does eating contribute to the flow of energy in an ecosystem?

Answers

When an animal eats some animal then it's energy get transferred in it's body so, it helps in flow of the energy with in the ecosystem.

Hope this helps!

Answer: The correct answer is-

Flow of energy in an ecosystem ( a large community of life forms that interact with each other as well as their physical environment in a particular area) takes place through food chain.

A food chain is a linear network of different organisms ( occupying different trophic levels) where organisms at one trophic level consumes organisms at previous trophic level and energy flow takes place in the form of organic matter.

Producers ( such plants) prepare their own food through photosynthesis and occupy the first trophic level.

Producers are eaten by primary consumers ( which are generally herbivores such as rabbits).

Primary consumers are eaten by secondary consumers, which are then eaten by tertiary consumers that are eaten by final consumers and then decomposers ( such as Fungi).

Example- Grass → Grasshopper → Frog→ Snake → Hawk → Fungi

Lakshmi has a sample of ammonium nitrate (NH4NO3) that has a mass of 40.10 g. She knows that the molar mass of NH4NO3 is 80.0432 g/mol. To the correct number of significant digits, how many moles of NH4NO3 does the sample contain?
0.50
0.500979
0.500980
0.5010

Answers

The answer is 0.5010

Number of moles (n) is equal to the quotient of mass (m) and molar mass of a sample (Mr):
n = m/Mr

We have:
n = ?
m = 40.10 g
Mr = 80.0432 g/mol

n = 40.10 g : 80.0432 g/mol = 0.5010

40.10 has 4 significant digits,
80.0432 has 6 significant digits.
Since 4 is less than 6, we choose 4 significant digits

how many carbon atoms are present in a mol of 12C?

Answers

One mole of any substance contains 6.02 x 10²³ particles

Which elements are the main components of the Sun?

Answers

Sun mainly contains "Hydrogen" which after nuclear fusion converts into "Helium". So, they both are it's main components. 

Hope this helps!
OK so what I have concluded  I believe the answer will be Hydrogen oxygen neon carbon nitrogen magnesium iron and silicon 

The molar mass of carbon is 40.08, oxygen is 16.0, what is the molar mass of glucose

Answers

Glucose is C6H12O6.
so u simply need to add the individual masses of 6 carbons, 12 hydrogens and 6 oxygens.

the molecular mass of carbon is 12 but if u take it as 40..
them it would be..
6x40+12x1+6x16= whatever u get in your calc. ;)

Answer:

348

Explanation:

Which of the following is the correct formula for sodium oxide? NaO2 Na­O Na2O3 Na3O4 Na2O

Answers

Since Na has a 1+ charge and O has a -2 charge, by reversing the charges and placing them as subscripts for the other atoms the formula is Na2O1 or simply Na2O.

Answer:

Na2O

Explanation:

Just took the quiz

Which of the following reactions is endothermic?

H2(g) + ½ O2(g)H2O(g),H = -57.82 kcal
½N2(g) + O2(g) + 8.1 kcalNO2(g)
½ N2(g) + 3/2 H2(g)NH3(g) + 11.0 kcal
C(diamond)+ O2(g)CO2,H = -94.50 kcal

Answers

The best and most correct answer among the choices provided by your question is the second choice.

The reaction ½N2(g) + O2(g) + 8.1 kcalNO2(g) is endothermic among .the given choices.

I hope my answer has come to your help. Thank you for posting your question here in Brainly. We hope to answer more of your questions and inquiries soon. Have a nice day ahead!

The formation of a gas in a chemical reaction, due to ions changing places, often indicates that the reaction is which type?
A) synthesis

B) double-displacement

C) decomposition

D) single-displacement

Answers

Answer:

the answer is D, i just got a 100

Explanation:

im him

Final answer:

The formation of a gas in a chemical reaction due to ions exchanging partners typically indicates that the reaction is a double-displacement or double-displacement reaction.

Explanation:

The formation of a gas in a chemical reaction, due to ions changing places, often indicates that the reaction is a double-displacement reaction. A double-displacement reaction involves two ionic compounds in aqueous solution where the anions and cations exchange partners, resulting in the formation of two new compounds. This type of reaction typically occurs in aqueous solutions and one of the new compounds formed is often a solid precipitate, a gas, or a molecular compound such as water.

Examples of double-replacement reactions include reactions where an acid reacts with a base to form a salt and water (neutralization), or when two soluble salts react and produce an insoluble salt precipitate or a gas. Overall, the distinguishing characteristic of a double-displacement reaction is that both reactants are compounds and they swap their anion or cation partners.

a salt shaker filled with 17.0g sodium chloride contain how many moles?

Answers

The molecular formula for sodium chloride is NaCl. The sum of their atomic weights is (22.99 grams/mole + 35.45 grams/mole) = 58.44 grams/mole
take (17.0 grams)/(58.44 grams/mole), which equals 0.291 moles of NaCl.

The number of moles in 17.0g sodium chloride is 0.291 moles

What are moles?

In the International System of Units, Mole is the base unit of the amount of any substance.

The mass of NaCl is 17.0 g

The molar mass of Na is 22.99 g/mol

The molar mass of Cl is 35.45 g/mol

The molar mass of NaCl will be

(22.99 g/mol + 35.45 g/mol) = 58.44 g/mol

[tex]\rm Number\;of \;moles= \dfrac{mass}{molar\;mass}\\\\\\\rm Number\;of \;moles= \dfrac{17.0 g}{58.44\; g/m} =0.291 mol[/tex]

Thus, the number of moles in 17.0g sodium chloride is 0.291 moles.

Learn more about moles, here:

https://brainly.com/question/15209553

What is the percentage of nitrogen in N2O? Show all calculations leading to an answer. Help

Answers

CThe answer is 64%.

(1) Calculate the molar mass of N2O which is the sume of atomic masses of its elements:
Mr(N2O) = 2Ar(N) + Ar(O)
Ar(N) = 14 g
Ar(O) = 16 g

Mr(N2O) = 2 * 14 + 16 = 28 + 16 = 42 g


(2) Calculate mass percentage of nitrogen in N2O.
Total mass is 44 g:  44g is 100%
Mass of nitrogen is 28 g:    28g is x%

44 g : 100% = 28 g : x
x = 28 g * 100% : 44 g
x = 63.64% ≈ 64%

The mass number of an atom is found by adding

Answers

adding protons and neutrons

State the total number of electrons occupying the p orbitals in one chlorine atom?

Answers

Electronic configuration of Cl is given by : Cl = 1s2, 2s2, 2p6, 3s2, 3p5 So total number of electrons in p orbitals are 11.



A substance that contains various elements or compounds without bonding or fixed proportions is a(n) _____.




















element
compound
mixture
formula
recipe

Answers

Is a mixture! .......

mixture is the answer

The most common shape for a galaxy is ______.

irregular
elliptical
cluster
spiral
spherical

Answers

the anser is spiral 
hope this helps

Answer:  Spiral

Explanation:

A galaxy contains billions of stars, dust and gases which are bound together by gravity. Galaxies have mainly three shapes:

Spiral - It has nucleus at the center from which arms extend outwards and wrap around like a spiral. Milky way is a spiral galaxy.

Elliptical - It is like flat ellipse. It has now characteristic features.

Irregular - It does not have any definite shape.

The most common shape of galaxy is the spiral shape.

Will fluorine form an anion or a cation? Why?

Answers

Fluorine will always form an anion. That is because at its basic form, it is electronegative, which means that it attracts electrons who give it a negative charge. This is why it will form an anion.

A pyrotechnician mixes 280 g of black powder for a firework. Find the amount of oxygen, carbon dioxide, and sulfur dioxide generated when this firework bursts, if the oxidizing agent in the powder is saltpeter. Which are the limiting reactants for each reaction? Based on this, calculate the maximum yield of oxygen, carbon dioxide, and sulfur dioxide when 280 g of black powder is burned. When the pyrotechnician tested the firework, he found the actual yields of oxygen, carbon dioxide, and sulfur dioxide to be 81.57 g, 82.75 g, and 46.5 g respectively. What is the percent yield of each gas? Why should pyrotechnicians worry about the yield of the reactants in a firework? How does the yield affect the firework and the environment?

Answers

Answer:

it would be 82.75

Explanation:

Final answer:

To predict the performance and environmental impact of a firework, its theoretical yields of oxygen, carbon dioxide, and sulfur dioxide are calculated. Actual yields are compared to these theoretical yields to determine percent yield, while also considering limiting reactants and their effects on the reaction's end amount.

Explanation:

To calculate the theoretical yield of oxygen, carbon dioxide, and sulfur dioxide produced from the 280 g of black powder used in a firework, we must first write and balance the chemical reaction using the components of gunpowder: charcoal (carbon), sulfur, and saltpeter (potassium nitrate). Saltpeter acts as the oxidizing agent providing the oxygen needed for combustion. The actual amounts of products formed can then be compared with theoretical yields to find the percent yield:

The theoretical yield of oxygen: It is determined by the amount of potassium nitrate that decomposes.The theoretical yield of carbon dioxide: This is determined by the complete combustion of carbon present in the charcoal.The theoretical yield of sulfur dioxide: It is based on the complete reaction of sulfur in the gunpowder.

Percent yield for each gas is calculated by dividing the actual yield by the theoretical yield and multiplying by 100. Pyrotechnicians must be concerned with the yield of reactants in fireworks because it affects the quality and safety of the firework and the amount of pollution created, which impacts the environment.

Limiting reactants are substances that will be consumed first, restricting the amount of product formed. By identifying which compounds are limiting, a pyrotechnician can predict how much product will be generated.

HElP ASAP Please! brainliest aswell: If 56 grams of carbon monoxide burns in oxygen to produce 88 grams of carbon dioxide, the mass of oxygen involved in the reaction is
A.32
B.56
C.88
D.144

Answers

the answer is A brainleiest pwez?
the number of oxygen equals number of carbon dioxide subtracted by the other element. so 32

Why is hydrogen chloride (HCl) polar?

it has equally shared electrons

it has unequally shared electrons

it has bent asymmetry

it has linear symmetry

Answers

It has unequally shared electrons is the right answer.

Answer: Option B

Explanation: Unequally shared shared electrons

i just got it right on the mastery test^^^^^

Which factor will have little effect on the solubility of saturated solutions?


A.
the temperature of the solvent


B.
the amount of extra time spent stirring the solution


C.
the amount of pressure the solvent is under


D.
the addition of other solutes

Answers

I am absolutely sure that the factor which will have little effect on the solubility of saturated solutions is the amount of extra time spent stirring the solution. I choose this option because this point will not make a big difference whereas the rest of option can perform a great impact. 
Do hope you will find it useful!

A) The most important factor for solubility is temperature

We define the solubility of a substance in a solvent at a particular temperature

a) for solids the solubility increases with increase in temperature

b) for gas the solubility decreases with increase in temperature

So temperature will have huge effect on solubility of a saturated solution

B) the amount of extra time spent stirring the solution will hardly any effect or may have a very little effect. As stirring helps in solubility and if we have a saturated solution then it will not affect the solubility of the solution

C) The solubility is affected by the pressure on solvent

For gaseous solute the solubility is proportional to the pressure exerted on the solvent. More the pressure more the solubility.

D) the other solutes may affect the solubility as they may react with the solute or may interfere with the solute solvent interaction

Hence answer is "B"

At STP, when 3.75 liters of oxygen reacts with excess glucose, what volume of carbon dioxide does it produce? 6O₂(g) + C₆H₁₂O₆(g) d 6H2O(g) + 6CO₂(g)

Answers

Each mole of oxygen produces 1 mole of carbon dioxide.
Therefore, a given volume of oxygen will produce the same volume of carbon dioxide.

Volume of CO₂ produced is 3.75 liters at STP.

This system relates to the process by which an organism gets rid of its waste.

Answers

its called the excretory system.

hope this helps you

How will the following changes affect the mole fraction of chlorine gas, χcl2, in the equilibrium mixture.?

Answers

Final answer:

Decreasing the volume of an equilibrium mixture by a factor of 3 will cause a corresponding increase in pressure. According to Le Châtelier's Principle, the system will adjust to reduce this increase in pressure by shifting the equilibrium to the side with fewer moles of gas. Therefore, the mole fraction of chlorine gas, χcl2, will decrease.

Explanation:

To understand how changes in conditions might affect the mole fraction of chlorine gas, χcl2, it's necessary to refer to Le Châtelier's principle, which states that a system in equilibrium will adjust so as to reduce any stress placed on it. The stress can be a change in pressure, volume, or concentration of reactants or products.

If you decrease the volume of the system by a factor of 3, the system will adjust to decrease the pressure by shifting the equilibrium to the side with fewer moles of gas. Given the reaction SbCl3 (g) + Cl2 (g) and knowing that chlorine molecules dissociate as per Cl2 (g) -> 2Cl(g), the system will respond to the increased pressure by shifting to the right to reduce the total number of gas molecules. This decrease of chlorine gas on the left side of the reaction will cause its mole fraction to decrease.

It is important to remember that changes shifting the equilibrium according to these process follow the rules defined by chemical equilibrium concepts and reaction quotient (Qc) values.

Learn more about Chemical Equilibrium here:

https://brainly.com/question/3920294

#SPJ12

How many moles of hydrogen gas would be needed to react with excess carbon dioxide to produce 19.1 moles of water vapor?

Answers

Final answer:

To produce 19.1 moles of water vapor when carbon dioxide is in excess, 19.1 moles of hydrogen gas are needed, based on the stoichiometry of the water-gas shift reaction.

Explanation:

To determine how many moles of hydrogen gas would be needed to react with excess carbon dioxide to produce 19.1 moles of water vapor, we need to consider the balanced chemical equation for the reaction. The reaction in question is not stated, but it is likely a form of the water-gas shift reaction, which is:

CO2 + H2 → CO + H2O

From the equation, we can see that for every mole of H2O produced, one mole of H2 is required, assuming that carbon dioxide (CO2) is in excess.

Therefore, if we have 19.1 moles of water vapor (H2O), we need 19.1 moles of hydrogen gas (H2).

Final answer:

To produce 19.1 moles of water vapor by reacting hydrogen gas with excess carbon dioxide, 19.1 moles of hydrogen gas would be required, assuming a 1:1 stoichiometry.

Explanation:

To determine how many moles of hydrogen gas are needed to react with excess carbon dioxide to produce 19.1 moles of water vapor, we need to consider the balanced chemical equation:

H₂ (g) + CO₂ (g) → H₂O (g) + CO (g)

However, the provided examples do not directly address this reaction. Instead, we can deduce from the given information that:

The formation of water from hydrogen and oxygen follows a stoichiometry of 2 H₂:1 O₂:2 H₂O.

In a similar vein, if we assume the reaction consuming hydrogen and carbon dioxide produces water and carbon monoxide in a 1:1 stoichiometry (as in the Sabatier process), we have:

H₂ (g) + CO₂ (g) → H₂O (g) + CO (g)

For every mole of water produced, one mole of hydrogen is required. Therefore, for 19.1 moles of water, 19.1 moles of hydrogen gas are needed.

Draw a structural isomer of ethylcyclohexane that also contains a 6-carbon ring.

Answers

this may help you
please see the  image

Structural isomer of ethylcyclohexane which also contains 6-carbon ring is as shown in the attachment.

What are structural isomers?

Structural isomers are defined as the isomers  in which  atoms are completely  arranged  in a different order but the molecular formula remains the same.

They are the molecules which have same molecular formula but different  connectivities  of atoms  which depend on the order they are put together.An increase in the number of carbon atoms leads to an increase  in the structural isomers.

There are 3 types of structural isomerism  which are as follows:

1)Chain isomerism - In this isomerism, there is a difference  in the atomic arrangement  of carbon and carbon chain .

2) position isomerism- In this isomerism, there is a difference  occupied by the substituent atoms  due to unsaturation in the chain.

3) functional group isomerism-In this isomerism, there is a presence of odd form of a functional group.

Learn more about structural isomerism ,here:

https://brainly.com/question/28304660

#SPJ5

What letter represents the activation energy for the reaction without/with the enzyme?

Answers

Final answer:

The activation energy is usually symbolized by 'E' or 'Ea' in many diagrams. When analyzing biochemical reactions with and without an enzyme, the activation energy with an enzyme may be represented by 'b', while without an enzyme might be represented by 'a'.

Explanation:

In most diagrams that represent energy in a chemical reaction, the activation energy is typically represented by the letter 'E' or 'Ea'. The activation energy is the energy necessary for a chemical reaction to occur. In the context of a biochemical reaction influenced by an enzyme, the activation energy would be represented separately for the reaction with and without the enzyme.

For example, in a reaction without an enzyme, it might be represented by the letter 'a', which indicates a large amount of activation energy required. But in a reaction with an enzyme, it might be represented by the letter 'b', signifying the lower amount of activation energy required due to enzyme catalysis. Hence, enzymes lower the activation energy making the reactions occur more readily.

Learn more about Activation Energy here:

https://brainly.com/question/28384644

#SPJ12

Give the approximate bond angle for a molecule with a trigonal planar shape.
A) 109.5°
B) 180°
C) 120°
D) 105°
E) 90°

Answers

C) 120 degrees is the approx bond angle
Other Questions
Shannon has a recipe for fruit punch that makes 12 quarts of punch. how many 3/4 quart servings will the recipe make Where do most people in South America live? Which type of atom has the strongest attraction for electrons in bond formation? barium (Ba) chlorine (Cl) iodine (I) strontium (Sr) an ore contains a mixture of zinc carbonate and lead carbonate. Zinc and lead are produced from this ore by 2 reactions.REACTION 1: The carbonates in the ore are converted into a mixture of zinc oxide and lead oxideName this type of reaction. ______________________How is this reaction done? _______________________REACTION 2: the metals are mixed with carbon and heated in a furnace to produce zinc and leadExplain why zinc and lead are produced ...? Which answer most precisely describes the location of mecca and Medina?A. Arabian peninsula B. Holy land and Mesopotamia C. North Africa D. Southwest asia I think it is B not too sure. How to solve -13=5(1 4m)-2m? I am part of a whole I am greater than three fourths but less than nine tenths I am a decimal with a 3 in my hundredths place what number am I ? Identify the lateral area and surface area of a regular triangular pyramid with base edge length 14 cm and slant height 15 cm.I already have the lateral area figured out (315), I don't understand how to get the surface area. XP I always get it wrong. If a person editing your paper is circling repetitive words, he/she is focusing on a. overall structure. c. sentences. b. word choice. d. paragraphs. Which of these is a source of voltage? a. a battery b. a generator c. an electrical outlet d. all of these are voltage sources. 1. What does it mean that photographs are two-dimensional? 2. What are the advantages of two-dimensional art forms like photographs? 3.What are the limitations of two-dimensional art forms like photographs? ATP molecules store cellular energy. When phosphate groups are removed and molecules of ADP are formed, energy is released. This energy can be used to perform ...? If a 60-watt bulb is used to light a room, how much current is flowing through the bulb given that the voltage is 120 volts? Why does Spain have such a varied climate? 2. In a molecule represented by the chemical formula C6H12O6, how many atoms of each element are present? What is the answer of 3x+5=2x+3? How do i find the area between the two curves What occurs when a muscle becomes weaker and smaller from not being used?Answergets strongeratrophyweight gainturns to fat ...? 1)The spectrum of lithium has a red line of 670.8 nanometers. (Remember 1 m = 1 X 109 nm) a.Convert the nanometer to meter using dimensional analysis. b.Calculate the frequency of the wave. c.Calculate the energy of a photon with this wavelength. If CDFG is a kite, find the measure of Angle D. a. 124 b. 120 c. 118 d. 122