Why are “input” and “output” good words to use when discussing systems?

Globalization facilitates international trade, leading to increased wealth, better and less expensive products for consumers, and higher incomes for employees of successful businesses. It also creates international awareness and serves as a political counterbalance to domestic protectionism.

One of the key benefits of globalization is the potential for increased wealth across nations. Through reductions in tariffs, quotas, and other trade barriers, as well as improved transportation and communication technologies, globalization has driven down costs. This has facilitated international trade, allowing consumers to enjoy better and less expensive products and businesses to tap into larger markets, thereby increasing their profits. Employees of these successful businesses can also benefit from higher incomes.

Another advantage is the creation of international awareness and empowerment, promoting cultural exchange and international cooperation. Lastly, international agreements and treaties can act as a counterweight to domestic special interest groups, helping to prevent protectionist policies that could otherwise harm global economic progress.

Answer:

The answer is 2.28 seconds

Explanation:

Given data:

Work done = 8000J

Distance , d = 30 m

Power , P =3500 W

We know that

(a)  Work done = force × distance

      8000 J    = F x 30 m

                 F   = 8000 J / 30 m

                   =  266 N

(b) Power = work done / time taken

      3500 W = 8000 J/ time taken  

       3500 W x time taken = 8000 J  

         Time taken = 8000 J / 3500 W =2.28 s

Answer:

The correct answer will be option-B.

Explanation:

A scientific method is a systematic approach to understand and explain any natural phenomenon of nature.

The method involves various steps which begin with making an observation followed by asking a question which could have real answers and could be tested through scientific experiments. Based on the question background research is done and a hypothesis is proposed to which could be proved or disproved through the experiments.

Thus, Option-B is the correct answer.

Answer: Option (A)

Explanation: In the picture given below, we could see two plates colliding one another. The denser oceanic plate is getting subducted beneath the other and there occurs a trench which lies relatively at a lower elevation than the continental crust.

                              The oceanic crust usually is composed of basalt and it does not exert any upward force towards the continental crust.

Added potential energy = (mass) x (gravity) x (height)

or

Added potential energy = (weight) x (added height)

If you need to lift a 15N box 3m straight up, you have to increase its potential energy by (15 N) x (3 m) = 45 Joules .

Where is that added potential energy supposed to come from ?  You could use an electric winch, a steam engine, a gasoline-powered motor, thousands of hamsters running on little treadmills that are are connected to the main pulley somehow, or your own arm muscles.  But howEVER you do it, you have to provide 45 Joules of WORK in order to increase the potential energy of the box by just that much.  

-- the CD player . . . . .  3,924,000 joules

-- the blender . . . . .  36,000 joules

-- the hair dryer . . . . .  270,000 joules

-- the computer . . . . .  7,200,000 joules

The computer is the big loser, mainly because it was left turned on for so long.

Answer:

The computer uses more energy.

Explanation:

We know that the power of an electrical appliance is given by :

[tex]P=\dfrac{E}{t}[/tex]

[tex]E=P\times t[/tex]

E is the energy of the appliance

t is the time taken

For CD player :

Power = 30 watts

Time, t = 3 hours = 10800 s

[tex]E=30\times 10800[/tex]    

E = 324000 Joules

or E = 324 kJ

For blender :

Power = 300 watts

Time, t = 2 hours = 120 s

[tex]E=300\times 120[/tex]    

E = 36000 Joules

or E = 36 kJ

For hair dryer:

Power = 1500 watts

Time, t = 3 minutes = 180 s

[tex]E=1500\times 180[/tex]    

E = 270000 Joules

or E = 270 kJ

For computer:

Power = 200 watts

Time, t = 10 hours= 36000 s

[tex]E=200\times 36000[/tex]    

E = 7200000 Joules

or E = 7200 kJ

So, the computer uses more energy i.e. 7200 kJ. Hence, the correct option is (d).

The most likely method of heat transfer from the heating element to the pot to the boiling water would be conduction, as it is the process by which heat is transferred through direct contact.

The most likely method of heat transfer described in the question would be conduction. This is the process that takes place when heat is transferred through direct contact between materials. In the case described in the question, the heating element comes into direct contact with the pot, and then the pot comes into direct contact with the boiling water, thus the heat is transferred from one to the other. This is conduction.

It's also interesting to note the other forms of heat transfer for comparison. Convection is the process of heat transfer by actual movement of matter; it can't happen through solid materials, such as between a pot and the heating element, but only through liquids, gases, and plasma. On the other hand, radiation is the transfer of energy by electromagnetic waves and doesn't require a medium (such as air, or a metal pot) to happen.

https://brainly.com/question/13433948

#SPJ12

Answer:

6400 m

Explanation:

You need to use the bulk modulus, K:

K = ρ dP/dρ

where ρ is density and P is pressure

Since ρ is changing by very little, we can say:

K ≈ ρ ΔP/Δρ

Therefore, solving for ΔP:

ΔP = K Δρ / ρ

We can calculate K from Young's modulus (E) and Poisson's ratio (ν):

K = E / (3 (1 - 2ν))

Substituting:

ΔP = E / (3 (1 - 2ν)) (Δρ / ρ)

Before compression:

ρ = m / V

After compression:

ρ+Δρ = m / (V - 0.001 V)

ρ+Δρ = m / (0.999 V)

ρ+Δρ = ρ / 0.999

1 + (Δρ/ρ) = 1 / 0.999

Δρ/ρ = (1 / 0.999) - 1

Δρ/ρ = 0.001 / 0.999

Given:

E = 69 GPa = 69×10⁹ Pa

ν = 0.32

ΔP = 69×10⁹ Pa / (3 (1 - 2×0.32)) (0.001/0.999)

ΔP = 64.0×10⁶ Pa

If we assume seawater density is constant at 1027 kg/m³, then:

ρgh = P

(1027 kg/m³) (9.81 m/s²) h = 64.0×10⁶ Pa

h = 6350 m

Rounded to two sig-figs, the ocean depth at which the sphere's volume is reduced by 0.10% is approximately 6400 m.

Hello There!

A force is simply just a pull or a push on an object. It’s measured in Newtons “N”

Matter is anything that has mass and it takes up space. This is also known as volume

Explanation:

FORCE:

force is any interaction that, when unopposed, will change the motion of an object.

MATTER:

anything which have mass and occupies space in air is known as Matter

Answer:

If iron, nickle, or cobalt is an answer choice, those are the three metals that are purely magnetic.

A fan never 'cools' a room.  It has no way to change the temperature of anything.

A fan does nothing but MOVE air, and air that's MOVing FEELS cooler on human skin than air that's NOT moving, even at the same temperature.  Non-living objects, and most animals, don't feel any difference on account of a fan.

It doesn't matter whether the room is open or closed.  If the air in the room is moving, then a PERSON in the room will FEEL cooler than if the air is not moving.

Answer:

no the room does not change temperature

Answer:

show the relative magnitude and direction of all forces acting upon an object

Explanation:

A free body diagram shows all the forces acting on a body. It gives the magnitude and direction of the number of forces acting on an object when it is in equilibrium.

For example,

When a force applied to an object is F. The force of friction also acts on it in opposite direction. Its weight is also acting in vertically downward direction. One normal is also acting on it.

It shows that all type of forces acting on the object i.e. normal force, gravitational force, frictional force and the applied force.

Answer:

Metals

Explanation:

Please mark brainliest and have a great day!

Average velocity =

(distance and direction of their change in location)

divided by

(time for the change) .

Distance and direction of their change in location = 2.0 km east  (their "displacement")

Time for the change = 30 minutes

Average velocity = (2.0 km east) / (30 minutes)

Average velocity = (2/30) (km east/minute)

Average velocity = 0.067 km/min east

or

Average velocity = 4.0 km/hr east

Just to be difficult, the question specifies that the answer must be given in units of m/s.  Is no problema for nosotros:

Average velocity = (4.0 km-east/hour) x (1,000 m/km) x (1 hour/3600 sec)

Average velocity = (4 x 1,000 / 3,600) (km-east-meter-hr / hr-km-sec)

Average velocity = 1.111... m/s East

Answer:

thanks for the asnwer

Explanation:

Answer:

The answer is rubidium exhibits +1 and -1 oxidation states.

Explanation:

Rubidium is a reactive element and belongs to the group 1 of the periodic table. It is an alkali metal and it is a highly reactive element.

Rubidium is a very soft and white lustrous element. Rubidium has +1 and -1 oxidation states. When rubidium is burnt, it forms oxides, superoxides and peroxides respectively.

For example, in rubidium oxide (Rb2O), Rubidium has a +1 oxidation state. While in peroxides rubidium exhibits -1 oxidation state. For example Rubidium peroxides (Rb2O2).

Answer:

1440 N

Explanation:

The electrostatic force between the two charges is given by:

[tex]F=k\frac{q_1 q_2}{r^2}[/tex]

where:

[tex]k=9.00 \cdot 10^9 N m^2 C^{-2}[/tex] is the Coulomb's constant

[tex]q_1 = q_2 = -8.00 \cdot 10^{-5} C[/tex] is the value of each charge

r = 20.0 cm = 0.20 m is the separation between the charges

Substituting numbers into the equation, we find

[tex]F=(9\cdot 10^9 N m^2 C^{-2} )\frac{(-8.00 \cdot 10^{-5}C)^2}{(0.20 m)^2}=1440 N[/tex]

Answer:

Cart A

Explanation:

Momentum can be computed by finding the product of mass and velocity. To solve this, you can use the formula below to find the greatest momentum:

p = mv

where:

p = momentum (kgm/s)       m = mass (kg)         v = velocity (m/s)

Because carts are moving along with the weights, we need to consider the whole system. This means that you need to add in the masses and the mass of the cart.

Cart A:

m = 200kg + 0 kg = 200 kg

v = 4.8 m/s

p = 200kg x 4.8 m/s = 960 kg-m/s

Cart B:

m = 200kg + 20 kg = 220 kg

v = 4.0 m/s

p = 220kg x 4.0 m/s = 880 kg-m/s

Cart C:

m = 200kg + 40 kg = 240 kg

v = 3.8 m/s

p = 240kg x 3.8 m/s = 912 kg-m/s

Cart D:

m = 200kg + 60 kg = 260 kg

v = 3.5 m/s

p = 260kg x 3.5 m/s = 910 kg-m/s

As you can see, Cart A has the greatest momentum.

Answer: A

Explanation: I took the test

Answer:

f=ma

Explanation:

According to second law of motion Force is directly proportional to rate of change of momentum.

so F is directly proportional to [tex]\frac{dp}{dt}[/tex]

we know that momentum P= MV

so

[tex]f=d(mv)/dt=m\frac{dv}{dt}[/tex]

thus we get F=ma.

Answer:

Let F be external force applied on the body in the direction of motion of the body for time interval [tex]\sf \Delta t[/tex], the the velocity of a body of mass m changes from [tex]\sf v [/tex] to [tex]\sf v + \Delta v[/tex] i.e. change in momentum, [tex]\sf \Delta p = m \Delta v [/tex].

According to Newton's second law :

[tex]:\implies \sf F \propto \dfrac{\Delta p}{\Delta t} \\ \\ \\ [/tex]

[tex]:\implies \sf F = k \: \dfrac{\Delta p}{\Delta t} \\ \\ \\ [/tex]

Where k is a constant of proportionality.

If limit [tex]\sf \Delta t \rightarrow 0,[/tex] then the term [tex]\sf \dfrac{\Delta p}{\Delta t}[/tex] becomes the derivative [tex]\sf \dfrac{dp}{dt}[/tex].

Thus,

[tex]:\implies \sf F = k \: \dfrac{dp}{dt} \\ \\ \\ [/tex]

For a body of fixed mass (m), we have :

[tex]:\implies \sf F = k \dfrac{d(mv)}{dt} \\ \\ \\ [/tex]

[tex]:\implies \sf F = km \: \dfrac{dv}{dt} \\ \\ \\ [/tex]

[tex]:\implies \sf F = kma \\ \\ \\ [/tex]

If v is fixed and m is variable then :

[tex]:\implies \sf F = \dfrac{kd(mv)}{dt} \\ \\ \\ [/tex]

[tex]:\implies \sf F = \dfrac{kvdm}{dt} \\ \\ \\ [/tex]

because, k = 1 then :

[tex]:\implies \sf F =\dfrac{vdm}{dt}[/tex]

Now, a unit force may be defined as the force which produces unit acceleration in a body of unit mass :]

So,

F = 1

m = 1

a = 1

k = 1

So,

[tex]:\implies \underline{ \boxed{ \sf F = ma}}[/tex]

Answer:Valence electron

The family properties in the periodic table are determined by the number of valence electrons, and chemical properties are influenced by protons and valence electrons. Atoms with the same number of protons but different neutrons are isotopes, maintaining the element's identity.

Each family in the periodic table has its own characteristic properties based on the number of valence electrons. The periodic table organizes elements by increasing atomic number, which is defined by the number of protons within the nucleus of an atom. The chemical properties of an element are primarily determined by its number of protons and valence electrons. Atoms with the same number of protons but differing numbers of neutrons are known as isotopes and do not change the element's location in the periodic table. For example, carbon will always have six protons, regardless of the number of neutrons; thus, it retains its chemical identity as carbon.

Answer:

Water that contains a larger than normal amount of magnesium is still safe to drink.

Explanation:

Sulfur, lead and arsenic are harmful metals that are toxic to human health. Although magnesium present at high concentrations (above  approximately 250 mg/l each) can have a laxative effect. However, data suggest that  consumers adapt to these levels as exposures continue.

Answer:magnesium

That's the answer

Answer:

systems

Explanation:

they are a bunch of things functioning together

Answer:

D. systems, termed as "organ system".

Explanation:

The organ system is a system that consists of a group of organs that work together to ensure that the organism continues to survive.

Tissues are next in creating the specific organs, and are generally classified depending on the organ it is part of. Note that not all tissues are the same.

Cells are "the smallest", and groups of cells create tissues.

Nerves are part of the Nervous system, which helps provide sensory to the body to help react when the body comes into contact with something that may hurt body parts.

~

Answer:

B) Doppler effect

Explanation:

Scientists use the Doppler effect to determine motion of objects in the universe.

Answer:

B) Doppler effect

Explanation:

Think about the tools scientists use to collect evidence.

Here is proof that my answer is correct:

The weak nuclear force is responsible for allowing carbon-14 to become stable. Thus, the correct option is C.

Radioactivity may be defined as the process of the liberation of energy from the decay of the nuclei of certain types of atoms and isotopes.

During the process of radioactivity decay, a beta particle is terminated which leads to one neutron changing into a proton inducing carbon-14 to become nitrogen-14 which is more stable than carbon-14.

Therefore, the correct option for this question is C.

To learn more about Radioactivity, refer to the link:

https://brainly.com/question/2320811

#SPJ2

Answer: The height of the satellite above the surface of Earth is [tex]8.02\times 10^{5}m[/tex]

Explanation:

Given

Mass of the satellite, m= 1160 kg

tangential speed , v = 7446 m/s

Centripetal force , F = 8955 N

Radius of earth , R= [tex]6.38\times 10^{6}[/tex] m

Let height of satellite above surface of the Earth be H

Centripetal force on satellite is given by

[tex]F=\frac{mv^{2}}{R+H}[/tex]

=>[tex]H=\frac{mv^{2}}{F}-R[/tex]

=>[tex]H=(\frac{1160\times 7446^{2}}{8955}-6.38\times 10^{6}) m=8.02\times 10^{5}m[/tex]

Thus the height of the satellite above the surface of Earth is [tex]8.02\times 10^{5}m[/tex]

Answer:

8.02 x 10^5 m

Explanation:

8.02 x 10^5 m

Answer:

metal

Explanation:

metal is an excellent conductor for heat and electricity therefore making it perfect to experiment with different temperatures.

The Mariana Trench is the deepest ocean trench, located at a convergent plate boundary in the abyssal zone with depths reaching about 11,000 meters. High pressure, low nutrient content, and lack of light characterize this zone, where chemosynthetic bacteria at hydrothermal vents form the base of the food chain.

The Mariana Trench is known as the deepest ocean trench, residing at a depth that places it within the abyssal zone. This trench is located at a convergent plate boundary, a region where oceanic plates meet and one is forced beneath the other, creating a subduction zone. The Challenger Deep, within the Mariana Trench, reaches about 11,000 m (approximately 6.8 miles) deep. At these depths, there is high pressure and low nutrient content, and no light penetrates to allow photosynthesis. Therefore, organisms such as chemosynthetic bacteria form the base of the food chain, utilizing minerals from hydrothermal vents for energy.

Answer:

Pros and Cons of Analog Signals: Advantages: major advantages of the analog signal is infinite amount of data. Density is much higher. easy processing. Disadvantages: Unwanted noise in recording. If we transmit data at long distance then unwanted disturbance is there.

Explanation:

Answer:

Pros and Cons of Analog Signals: Advantages: major advantages of the analog signal is infinite amount of data. Density is much higher. easy processing. Disadvantages: Unwanted noise in recording. If we transmit data at long distance then unwanted disturbance is there.

Explanation:

Answer:

mass

Explanation:

The heaviness of an object with the relation to force of gravity, is described by the ‘weight’

Explanation:

The heaviness of the object is referred to the mass of the object. When the mass of the object is concerned it is taken in space or vacuum where force of gravity do not exist.

Therefore, to value the actual heaviness of the object, mass is multiplied by the component of force of gravity, is termed as weight.  

[tex] \bold{\text { Weight }=\text { Mass } \times \text { Accleration due to gravity }} [/tex]

Answer:

the answer is C.

Explanation:

Answer:

On Edge it is A, D, E.

Explanation: Have a nice day