Which substance can be decomposed by chemical means?

a.cobalt

b.krypton

c.methane

d.zirconium?

Answer:

A.fluorine

Explanation:

Plato

Rutherford deduced that an atom is mostly empty space because most alpha particles in his experiment passed through the gold foil unabated; only a few particles deflected due to the presence of a small, dense, positively charged nucleus.

Rutherford concluded that the atom was mostly empty space based on his gold foil experiment. He observed that the vast majority of the alpha particles passed through the gold foil without deflection, indicating that they encountered no significant obstacle, hence most of the atom was empty space. A very small number of alpha particles were deflected at large angles, and even fewer were deflected straight back, which suggested that they interacted with something very small and with a substantial positive charge and mass. This led Rutherford to propose the nucleus, a tiny, dense center within the atom composed of protons and neutrons. He surmised that the electrons orbit this nucleus, much like planets around the sun, in what is known as the planetary model of the atom.

Among the following, Li will form Catian due to its high probability of donating electron as it have low ionization enthalpy.

The ionization enthalpy of an element can be defined as the amount of energy required to remove an electron from an isolated gaseous atom in its gaseous state.

Among th given options ;

Ne is an inert gas element i.e, inactive element and has complete outermost orbit thus no need to accept or donate electron.

Li will form Catian due to its high probability of donating electron as it have low ionization enthalpy.

O has stable outermost orbital and thus no need to accept or donate electron.

I is the least reactive element and comparatively high ionization enthalpy.

Hence, Among the following, Li will form Catian due to its high probability of donating electron as it have low ionization enthalpy.

Learn more about ionization here ;

https://brainly.com/question/1602374

#SPJ2

Answer:

H2

Explanation:

The 2 in this equation is supposed to be little.

Answer: It is considered to be a mixture

Explanation: It's a mixture because the mud and water are mixed together, which will create a mixture.

It would be a heterogeneous mixture because the mud and water are not mixed evenly, and a heterogeneous mixture is a mixture that is not mixed evenly, whereas a homogeneous mixture is something that is mixed evenly:)

Answer : The [tex]\angle 3\text{ and }\angle 4[/tex] are, supplementary angles.

Explanation :

Supplementary angles  : The two angles are supplementary angle in whcih the the sum of those two angle are [tex]180^o[/tex]

Complementary angles  : The two angles are complementary angle in whcih the the sum of those two angle are [tex]90^o[/tex]

Vertical angles  : Vertical angles are the angles that are opposite to each other when two lines intersect each other.

Congruent angle : It is defined as they have the same angles.

From the above information we conclude that,

[tex]\angle 1\text{ and }\angle 2[/tex], [tex]\angle 2\text{ and }\angle 3[/tex], [tex]\angle 3\text{ and }\angle 4[/tex] and [tex]\angle 4\text{ and }\angle 1[/tex] are the supplementary angles.

[tex]\angle 1\text{ and }\angle 3[/tex] and [tex]\angle 2\text{ and }\angle 4[/tex] are the vertical angles.

Hence, the [tex]\angle 3\text{ and }\angle 4[/tex] are, supplementary angles.

The lead piece has more mass with a mass of 319.2 g, while the gold piece has a mass of 308.8 g.

To determine which piece has more mass, we need to calculate the mass of each piece using the given densities.

The mass of an object can be calculated using the formula:

mass = density x volume

For the lead piece:

mass of lead = density of lead x volume of lead

mass of lead = 11.4 g/cm3 x 28.0 cm3

mass of lead = 319.2 g

For the gold piece:

mass of gold = density of gold x volume of gold

mass of gold = 19.3 g/cm3 x 16.0 cm3

mass of gold = 308.8 g

Comparing the masses of the two pieces, we can see that the lead piece has more mass with a mass of 319.2 g, while the gold piece has a mass of 308.8 g.

Answer: The energy associated with blue light is [tex]49.65\times 10^{-20}J[/tex]

Explanation:

To calculate the energy of the light for a given frequency, we use the equation given by Planck, which is:

[tex]E=h\nu[/tex]

where,

E = energy of the light

h = Planck's constant = [tex]6.62\times 10^{-34}Js[/tex]

[tex]\nu[/tex] = frequency of the light = [tex]7.5\times 10^{14}s^{-1}[/tex]

Putting values in above equation, we get:

[tex]E=6.62\times 10^{-34}Js\times 7.5\times 10^{14}s^{-1}=49.65\times 10^{-20}J[/tex]

Hence, the energy associated with blue light is [tex]49.65\times 10^{-20}J[/tex]

[tex]\rm 49.65 \times 10^-^2^0\;J[/tex] is the energy associated with the frequency.

The number of times a repeated event occurs per unit of time is known as frequency.

The frequency of the blue light is 7.5 x 1014 Hz

To calculate the energy of the light, we will use plank's equation

[tex]\rm E = hv[/tex]

Where E = energy

[tex]\rm Plank's \;constant = 6.62 \times 10^-^3^4 Js\\\\ Frequency \;of \;the\;light\;v = 7.5 \times 10^-^1^4 s^-^1[/tex]

Putting the values

[tex]\rm E =6.62 \times 10^-^3^4 \times 7.5 \times 10^-^1^4 = 49.65 \times 10^-^2^0\;J[/tex]

Thus, the energy associated with this frequency is [tex]\rm 49.65 \times 10^-^2^0\;J[/tex]

Learn more about frequency, here:

https://brainly.com/question/14926605

The molar mass of PCl5 is 208.24 g/mol. So calculating for the number of moles:

moles PCl5 = 280 / 208.24

moles PCl5 = 1.34 mol

From the equation, 67 kJ of heat is absorbed for every 1 mole hence:

total heat = 67 kJ / mol * 1.34 mol

total heat = 90 kJ

the correct answer is 2,3,4,6, and 7

Answer:

the states of the reactants and products

the temperature and pressure at which the reaction was carried out

the relative amounts of reactants and products

the type of catalyst that is used to speed up the reaction

whether the reaction can go in both directions

2, 3, 4, 6, 7 / B, C, D, F, G

In the given question, [tex]\rm MgBr_2[/tex] is an ionic bond. The correct answer is option 2.

A covalent bond is a type of chemical bond in which two atoms share one or more pairs of electrons.

Ionic bonds is formed between a metal and a nonmetal, where one atom gives up an electron to another atom. In [tex]\rm MgBr_2[/tex], magnesium (Mg) is a metal and bromine (Br) is a nonmetal. Magnesium gives up two electrons to bromine, forming an ionic bond.

Therefore, option 2. ionic bond is the correct answer.

Learn more about covalent bond here:

https://brainly.com/question/19382448

#SPJ6

1. Speed, since we know that [tex]s=\frac{d}{t}[/tex], where s is speed, d is distance and t is time

2. Velocity, for velocity you need to consider the direction and displacement gives the direction of travel.

3. 25 mph, because [tex]s=\frac{d}{t} =\frac{50}{2} =25mph[/tex]

4. 50 mph east, velocity unlike speed has direction.

5.Velocity, displacement gives the formula  [tex] v=\frac{d}{t}[/tex] direction.

6. 0, the displacement is zero so velocity is zero

7.  It decreases, speed is inversely proportional to time

Answer:

The second step is the atomization (sublimation) of Ba

Ba(s) → Ba(g)

Explanation:

The Born Haber cycle allows one to determine the lattice energy of an ionic solid. Lattice energy or lattice enthalpy is the enthalpy change when 1  mole of an ionic solid is formed from its gaseous ions.

In the given example of BaI2 the corresponding steps as per the Born Haber cycle would be:

Step 1) Enthalpy of Formation of BaI2

Ba(s) + I2(s) → BaI2 (s)

Step 2) Atomization of Ba

Ba(s) → Ba(g)

Step 3) Atomization of I2

I2(s) → I2(g)

Step4) IOnization of Ba(g)

Ba(g) → Ba2+(g) + 2e-

Step 5) Electron affinity of I2

I2(g) + 2e- → 2I-(g)

Step 4) Lattice energy of BaI2

Ba2+ (g) + 2I-(g) → BaI2

The temperatures of three substances in order from greatest to least is

This is the degree of hotness or coldness of a substance. It is also the

average kinetic energy present in a body.

Higher temperatures usually have the highest average kinetic energy.

Gases have the highest kinetic energy while Solids have the least kinetic

energy. In the case of Water, the gaseous form is Water vapor and the

solid form is Ice.

Read more about Temperature here  https://brainly.com/question/24325419

Final answer:

Atoms of an element are identical in atomic structure but can include different isotopes. Samples of beryllium and carbon can contain isotopes, but most atoms will be of the most common isotope. The presence of atoms with a mass number greater than 12 in a carbon sample indicates isotopes like carbon-13 or carbon-14.

Explanation:

If you have a sample of beryllium, the atoms within that sample would be identical in terms of their atomic structure, meaning each atom has the same number of protons, neutrons, and electrons. However, any sample of an element, including beryllium and carbon, can contain different isotopes, which means there can be atoms with different numbers of neutrons. For example, the most prevalent isotope of carbon is carbon-12, with 6 protons and 6 neutrons. In addition to carbon-12, we also find carbon-13, with an extra neutron, and carbon-14, with two extra neutrons.

When you analyze a sample of carbon and find that 6% of the atoms have a mass number greater than 12, you can conclude that 6% of the sample is comprised of carbon isotopes. This means the vast majority (94%) of your sample is carbon-12, the normal atomic mass of carbon, while the remaining part consists of isotopes like carbon-13 and the radioactive carbon-14. Carbon-14 is used in radiocarbon dating, a tool for archaeological studies.

Answer is: No. Salt, like all matter is composed of atoms.

For example, table salt is sodium chloride mixed with small amount of potassium iodide (KI), sodium iodide (NaI) or sodium iodate (NaIO₃).

Atomic level - sodium chloride (NaCl) has crystal cubic structure (lattice-type arrangement) with ionic bonds. Sodium is cation with charge 1+ and chlorine is an anion with charge 1-.

Macroscopic level - table salt is colorless crystal, soluble in water with high melting and boiling temperature.

the answer is true. Each element has it's own emission bright line spectrum pattern

Among the given substances, Ammonia, a compound, can be decomposed into Nitrogen and Hydrogen by a chemical change.

The substance that can be decomposed by a chemical change among Sodium, Argon, Sulfur, and Ammonia is Ammonia. In a chemical change, one or more substances are converted into different substances. In this context, Sodium, Argon, and Sulfur are elements that exist in their most simplified form and cannot be broken further down by chemical change. On the other hand, Ammonia (NH3) is a compound and can be decomposed into Nitrogen and Hydrogen via chemical changes.

https://brainly.com/question/33839344

#SPJ6

Answer:

For 10: The correct answer is Option c.

For 11: The correct answer is Option b.

Explanation:

There are 3 states of matter:

Solid state: In this state, the particles are closely packed and does not have any space between them. Thus, this state of matter has the highest intermolecular forces of attraction.

This state have a definite shape and volume.

Liquid state: In this state, the particles are present in random and irregular pattern. The particles are closely arranged but they can move from one place to another. The intermolecular forces between the particles are less as compared to the solid state.

This state have a definite volume but does not have a fixed shape as they can take up the shape of container in which they are kept.

Gaseous state: In this state, the particles are loosely arranged and have a lot of space between them. Thus, this state of matter has the lowest intermolecular forces of attraction.

This state have indefinite volume as well as shape. It can take up the volume and shape of the container in which they are kept.

From the above information:

For 10: The state of matter which takes up the shape and volume of the container is gaseous state.

Hence, the correct answer is Option c.

For 11: The state of matter which has indefinite shape but have a definite volume is liquid state.

Hence, the correct answer is Option b

A gas takes both the shape and volume of its container, while a liquid has a definite volume but takes the shape of its container. A solid does not conform to the container's shape or volume.

States of matter are characterized by their ability to take the shape and volume of their containers. The state of matter that takes both the shape and volume of its container is the gas state. This is because the particles in a gas are spread out and can move freely to fill any space available. On the other hand, a liquid has a definite volume but takes the shape of its container. Conversely, a solid does not change to fit the shape or volume of its container as its particles are tightly packed and only vibrate in place.

Which state of matter takes both the shape and volume of its container?

The answer is gas (c), as gases will expand to fill the entire volume of their container and take its shape.

Which state of matter is characterized by having an indefinite shape but a definite volume?

The answer is liquid (b). Liquids have a fixed volume but will flow and change their shape to conform to the shape of their container, without changing volume.