Answer:
a. In one’s complement format, the leftmost bit is saved for the sign where 1 indicates a negative number and 0 indicates a positive number.
Explanation:
In binary numbers, 1's complement is used to represent the signed binary numbers. In unsigned numbers, there is no need of sign. But in signed binary numbers a signed bit is required. To add the bit that is represent the sign of the number in binary, 0 represents the positive number while 1 represents the negative number.
If we have a number and want to convert it in signed binary number, we just takes it 1's complement and add the signed bit at the left of the number.
E.g.
1 = 0001
is the binary of 1, if we want to add sign, we just add the zero at left most side of the binary which make it positive as given below:
+1 = 0 0001
Now of we want to convert it into negative than, we take 1's complement in which all bits are inverted.
-1 = 1 1110
Final answer:
The correct answer is a. In one's complement format, the leftmost bit indicates the sign, with 1 for negative and 0 for positive numbers.
Explanation:
The true statement among the ones provided is a. In one's complement format, the leftmost bit is indeed saved for the sign where 1 indicates a negative number and 0 indicates a positive number.
b is incorrect because the smallest integer that can be represented by a sign-and-magnitude binary number is -0, which is considered distinct from +0 in this representation method.
c is incorrect because it is certainly possible to store the decimal number 16 (1610) in a 4-bit binary format, specifically as 10000, which does indeed cause overflow if only 4 bits are available, but the claim itself is not expressed as a true standalone statement considering normal binary representations.
d is incorrect because the two's complement representation of +67 (6710) in 8 bits is actually 01000011, not 1000011.
The while loop has two important parts: (1) a boolean expression that is tested for a true or false value, and (2) a statement or block of statements that is repeated as long as the expression is true.A.TrueB.False
Answer:
True is the correct answer for the above question.
Explanation:
The loop is used to repeat some specifies tasks for a finite amount of time. It is of three types:- For, Do-while and While.The While Loop is a Loop that has two things:- 1. The condition is used to decide that the loop statement executes or not and 2. Some line of the statement which holds the operation which helps the condition to be false after a finite iteration of the loop, so the loop executes finite times.The question-statement also wants to state which is described above. Hence the Question statement is a true statement.Answer:
The given statement is "True".
Explanation:
The while loop is iterating the condition when the condition is true if the condition which is given inside the while loop parenthesis is false it will not iterating the loop that's why sometimes while is also known as an Entry control loop. The while loop has tested the condition for a true or false value that's why the first statement is true.
In the second statement, the statement inside the while loop is executed until the condition of while loop is true when the condition id False it stops the execution of a while loop that's why the second statement is true.
Arnold Smith is a former hacker and programmer for an underground investigative journalism organization that focused on hacking government and corporate systems in order to leak information on criminal activity. Now, he regularly speaks to organizations on how to protect themselves against similar threats. In his presentations, which of the following would he NOT include as a factor that contributes to the increased vulnerability of information systems and why?
Answer:
Increased skills required to be a hacker because the skills required have decreased due to sophisticated software and easily accessible hacking scripts.
Explanation: A Hacker is a person or an organization which secretly and criminally steal or collects specific and critical details or information from another person or Organisations by using malicious softwares or through a stollen password. Hacker gain access into people's system and secret information illegally and it is punishable under the Law. He would not include increased skills required to be a Hacker, because of the sophisticated softwares available.
Arnold Smith would not include investigating hackers' motivations in his presentations on protecting against cyber threats.
Explanation:Arnold Smith, in his presentations on protecting against cyber threats, would NOT include investigating the motivations of hackers as a factor contributing to increased vulnerability of information systems. While understanding hackers' profiles is essential, his focus is likely on preventive measures and cybersecurity protocols rather than hacker psychology.
Many computer programs contain ____ that detail the specific instructions a computer should perform (in a specific order) to carry out a specified task, such as calculating employees' paychecks or printing students' report cards.
Answer:
Algorithms.
Explanation:
Computer system is an electronic machine that receives input data, processes or executes these data and outputs the results. It comprises of two parts, the hardware and software components.
The computer receives data created by a process and inputted by individuals. The software components are the operating system and the application softwares running in the operating system. The application software follows a well defined stages of task to execute a task. This is called algorithm.
The application uses the algorithm to execute the task on the input data to give the required result.
E-mail messages, instant messages (IMs), or text messages sent and/or received within an organization a. are not included on a records retention schedule. b. may be considered as records or nonrecords. c. original messages are retained in the e-mail system indefinitely. d. do not reduce mailing costs.
Answer:
b. may be considered as records or non records
Explanation:
Message in an organization and even instant messages (IMs) can be considered as records or nonrecords, this depends on the content, nowadays in a company can be used apps like social media, important information can be stored between customers or partners, this no reduces any cost and the message can be deleted depends on the server settings.
E-mail messages, instant messages, and text messages within an organization may be considered as records or nonrecords, depending on the content and company policies. They are subject to regulations and guidelines for record retention and significantly reduce mailing costs compared to traditional mail.
Explanation:E-mail and Instant Messaging Retention in Organizations
The question at hand deals with how electronic communications like e-mail messages, instant messages (IMs), or text messages are managed within an organization, specifically in regard to record retention schedules. These types of messages may be considered as records or nonrecords, depending on the content and organizational policies. Many organizations classify such communications as records because they can contain important business information, decisions, or data that might need to be referenced or are legally required to be kept over time.
Record retention schedules for electronic communications are governed by a combination of regulations, company policies, and sometimes the nature of the business itself. It is not accurate to say that these messages are retained indefinitely in the e-mail system; rather, they must be maintained in accordance with applicable laws and regulations, which can vary greatly depending on the industry and type of information contained. Likewise, the notion that these digital communications do not reduce mailing costs is incorrect, as they in fact significantly reduce mailing costs by eliminating most physical handling, transportation, and delivery requirements of traditional mail.
Professional communication through these mediums should be conducted with an understanding that any digital message sent from a company email can be considered company property and subject to records management policies. Therefore, employees should be careful with the content of their communications, and organizations should have clear policies regarding the retention, archiving, and deletion of electronic records.
Which is the first step in a thermal printer printing process?
A feed assembly feeds the paper through the printer
Rollers grab paper from a tray
The fuser heats up and prepares for printing
The print heads heat up and render a print
Answer:
Then, when you're about to actually generate the Shipping label: Select the desired Shipping Label size for your thermal label printer. Click OK to generate the shipping label.
Hope this helps :)
Suppose you are on a desert island and possess exactly 20 coconuts your neighbor Friday is a fisherman and he is willing to trade to fish for every one coconut that you are willing to give him another neighbor Cowan is also a fisherman and is willing to trade three fish for every one coconut
Answer:
Explanation:
It seems a good deal, this it could be like old-time, when there is no coin, people traded goods and service for other goods and service, this was the economic, in this particular example it could be something similar, but is the fish is bigger could be traded by two coconuts, in addition, the job of the fisherman is harder and the coconuts are for season.
In the scenario presented, Friday would experience a trade surplus as he is giving Robinson more in terms of fish and coconuts without an immediate return, establishing an imbalance of trade. Conversely, Robinson would have a trade deficit as he is receiving goods from Friday without providing anything in return for several months, but with the promise of future repayment from the produce of his irrigated garden.
This situation is representative of real-world economics where countries, businesses, or individuals might experience periods of trade surpluses or deficits. A trade surplus occurs when the exports exceed the imports, leading to a net influx of domestic currency from foreign markets - which is the case for Friday in the given proposition. On the other hand, a trade deficit occurs when a country's imports exceed its exports, similar to Robinson's position, as it involves an outflow of domestic currency to foreign markets or, in the context of the scenario, an outflow of goods without an immediate inflow.
What is usually needed to get both a work calendar and a personal calendar to show in the same place on a mobile device?
A plug-in
An add-in
An app
Permission sharing
Answer:
Permission sharing
Explanation:
As each calendar represents a set of data that has Share preferences, you can switch it from being isolated on a desktop computer let's say, to shared on a mobile device. Since these two are not separate programs or apps, no plug-ins are needed. Also, this is not an add-in functionality. All you need to do is set the Share preferences on each calendar. Then they will become integrated on the selected device.
Jason is creating a web page for his school's basketball team. He just finished creating his storyboard. Which tool should he use to start coding? Storyboard Text editor Web browser Word processing document
Answer:
Jason should use the Text editor to create a web page for his school's basketball team.
Explanation:
You can do HTML, CSS, javascript coding using any text editor. The text editor is used for creating web pages. However, by default, a text editor "notepad" on windows is installed. You can use notepad like text editor for creating the web pages. Furthermore, the text editor writes all your code in black color and you need to adjust/ align code chunk accordingly for example if-else statement. However, you can download other text editors such as "Sublime text" etc. which is a friendly text editor and allow you to write code in different colors for understanding easily. So, Jason should use the text editor to create a web page for his project.
Why other options are not correct?
Storyboard
A storyboard is a tool of conceptualizing the idea about how your website functionally looks like. However, the storyboard can't use for creating a web page.
Web Browser
A web browser is used to display the web page and its content such as google chrome, firefox, Mozilla and internet explorer. Web browser can not use for creating the web pages rather it is used to display the web page contents such as text, graphics elements, videos, and audio, etc.
Word processing document
Word processing application produces word documents and does not create a web page. Because word processing document contains text and display as a document such you write a report, essay, story, and books, etc. Word processing document does not use for creating a web page. Because it does not convert HTML, CSS and javascript code into browser's readable format. Therefore, the word processing document contains plain text and does not use for creating web pages.
Answer:
Text editor
Explanation:
So lets say jason just finished planning his storyboard aka planning his design for the website he is going to make he already got the font down and everything else he needs except he doesnt know what to choose first.
Well lets break this down in a way dummies could understand
Storyboard
It cant be storyboard since he is already using that to make the website he needs to know what he could use after.
Text editor
Yes, this is the correct answer using a text editor is a great way to start your website after you your storyboard to plan it
Web browser
Sure a web browser is very helpful for many things but a web broswer is already basically a huge website that links to other smaller webitesbut since you need to make your own website this is inccorrect so hit the buzzer!
Word proccesing document
Word proccesing documents such as word can be used to plan your website in the first place, they can be used as a storyboard, so using them to create an idea is not a very good idea unless you want to plan one.
So the answer is text editor your welcome! p.s i hope dummies CAN understand this...
Visual Basics: 1 ) Write an if/else statement that compares the double variable pH with 7.0 and makes the following assignments to the bool variables neutral, base, and acid:
false, false, true if pH is less than 7
false, true, false if pH is greater than 7
true, false, false if pH is equal to 7
2) Visual Basics: Write an if/else statement that adds 1 to the variable minors if the variable age is less than 18, adds 1 to the variable adults if age is 18 through 64, and adds 1 to the variable seniors if age is 65 or older.
Answer:
visual basic: 1)
Module PHmodule
Sub Main()
'Creating a variable for each entity
dim ph as double = 0.0, neutral,base,acid as boolean
'Writing a line to show user what to do
console.writeline("Enter the pH :")
'Taking the value
ph=console.readline()
'using if & elseif statement for distingushing the values into correct catagories
if ph<7.0 then
neutral=false:base=false:acid=true
elseif ph>7.0 then
neutral=false:base=true:acid=false
elseif ph=7.0 then
neutral=true:base=false:acid=false
end if
'Printing the result
console.writeline(" Neutral :" & Neutral)
console.writeline(" base :" & base)
console.writeline(" acid :" & acid)
'command for staying in the command prompt for reading the result
console.readline()
End Sub
End Module
visual basic: 2)
Module AGEmodule()
Sub Main()
'Creating a variable for each entity
dim age,minors,adults,seniors as integer = 0
'Taking age from user
console.writeline("Enter the age")
age=console.readline()
'using if & elseif statement for checking the age differnce
if age<18 then'
minors +=1
else if age>18 and age<64 then
adults +=1
else if age>64 then
seniors +=1
end if
'printing result
console.writeline("minors="&minors)
console.writeline("adults="&adults)
console.writeline("seniors="&seniors)
'command for reading the result
console.readline()
End Sub
End Module
Explanation:
visual basic 1) it is very simple program which allow us to find if the substance is acidic, basic or neutral. we use sim statement for making a variable as double (gives value in decimal) which allow to take a value from the user through console.readline() command and then by using the if statement we apply the condition if the ph is less then, greator then or equal to 7.0 value. thus the program gives us the answer. console.writeline() command is used to print a command on the screen while console.readline() command let us read the lines until we press enter.
visual basic 2)a program which allow us to count and add number of persons according to their age. we use dim statement for creating the variable as integers in which we take the age from user and then after checking it through if statement we increment according to three categories i.e. minors, adults, seniors. the console.writeline() command allow us to print anything on screen and console.readline() allowus to take value while compiling.
thank you...
Drag the correct type of update to its definition.
PRL
PRI
Baseband
The connection between a mobile device and radio tower
The chip that controls the radio frequency waves within a device
A list of radio frequencies
Answer:
Explanation:
Baseband: The chip that controls the radio frequency waves within a device, is a range before to become in a different frequency range, for example, an audio frequency when is transmitted is a radio frequency.
The Preferred Roaming List (PRL) is a list of radio frequencies, and a database there residing in a wireless device like a cellphone.
PRI The chip that controls the radio frequency waves within a device.
Final answer:
PRL is a list of radio frequencies for roaming, PRI provides network behavior settings, and Baseband is the chip controlling radio frequency waves for communication between mobile devices and radio towers.
Explanation:
The terms PRL, PRI, and Baseband are all related to cellular network technology which involves communication between a mobile device and the radio towers that facilitate wireless connectivity. Here is a breakdown of each term matched to its definition:
PRL (Preferred Roaming List): This is a database residing in a mobile device that contains a list of radio frequencies. The PRL tells the device which bands, sub-bands, and service provider IDs will be used when trying to connect to a radio tower, thus enabling roaming.PRI (Product Release Instructions): This provides configuration information to the device, including protocols and settings that control how the device behaves on the network.Baseband: This refers to the chip within the mobile device that controls the radio frequency waves, functioning as the main communication processor for sending and receiving signals to and from the radio tower.All of these components are vital for a mobile device to effectively communicate within a network that is distributed over land areas called 'cells', ensuring that voice, data, and other types of content can be transmitted wirelessly over a wide geographic area.
Write a statement that uses a conditional expression that determines if the credits variable is less than 0. If the condition is true, assign the value 0 to the credits variable, otherwise the value of the credits variable should remain unchanged.
Answer:
The statement and the expression is "credits = credits<0?0 : credits;" for the above question.
Explanation:
The conditional expression is an expression that is used to determine the true and the false case. It works like the if and the else statement.It has three parts which are shown above, in which the first part is to check the condition, the second part is excuted if the condition is true and the third part is executed if the condition is false. The variable is used to assign the value.If any user provides the credit value and writes the above statement then the credit variable holds 0 for negative value and it holds the original value for any positive or zero value.Which of the following is an advantage to using internal databases for information? A. Internal information is accurate and complete. B. Internal information is in a form that is useful for making marketing decisions. C. They can be accessed quickly and cheaply. D. Internal information sources are easy to manage. E. The information stored in internal databases is always current.
Answer:
C. They can be accessed quickly and cheaply.
Explanation:
An internal database is information that can be obtained inside the company through internal networks. This information can be easy to get as it is in the network of the company and you have access to it and it also have a low cost as you don't have pay money to get it. According to this, the answer is that an advantage to using internal databases for information is that they can be accessed quickly and cheaply.
The other options are not right because internal information can be outdated and incomplete if it is not updated by people in the company and it can be found in different forms and it is not always easy to manage as this depends on the applications used and how the company decides to visualize it.
The creation of __________ with digital media allows for large quantities of numerical or textual data to be searched online by data points and trends. A. reference materials B. orientations C. comments and critiques D. summaries E. narratives
Answer:
Option A- Reference materials
Explanation:
Reference Materials A digital reference library that provides more than 600 high-quality reference books from the world's leading publishers to be searched online by data points and trends
Answer:
A. reference materials
Explanation:
Advantage:
Digital resources are materials composed of digital media and produced in order to facilitate the development of activities.There are many tools to create, modify and publish materials.Examples resources (blog, google sites, digital books).Tools to create digital materials (Pixlr, Screencast-O-Matic, Prezi, PowToon).Assume that a bool variable is Quadrilateral has been declared, and that an int variable, number Of Sides has been declared and initialized. Write a statement that assigns the value of is Quadrilateral to true if number Of Sides is exactly 4 and false otherwise.
Answer:
if (numOfSides==4){
isQuadrilateral=true;
}
else {
isQuadrilateral = false;
}
Explanation:
See below a complete program that prompts user to enter number of sides of the triangle
import java.util.Scanner;
public class TestClock {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.println("Enter the number of sides of the triangle");
int numOfSides = in.nextInt();
boolean isQuadrilateral;
if (numOfSides==4){
System.out.println("This is Quadrilateral");
isQuadrilateral=true;
}
else {
System.out.println("This is not Quadrilateral");
isQuadrilateral = false;
}
}
}
Which of the following statements about online research is correct? A. Experiments cannot be conducted online. B. The Internet is especially well suited to qualitative research. C. Online surveys generally have higher response rates than those conducted by mail or phone. D. Online research is only feasible for large companies. E. It is more expensive to conduct online research than using mail, phone, or personal interviews.
Answer:
Research involves information from the internet. Online surveys, questionnaires, forms, focus group, are some tools used for online research that gather data for analysis.In a given option, I think Online surveys have a high response than conducted by mail or phone.
Explanation:
Conduct Online research :
Define the topicIdentify which filed will address for online researchDetermine the list of itemsEvaluate the topicOrganize the materialOnline research could either be qualitative or quantitative.
Tools:
Some online tools are Google Trends, Omgili, Spezify, and many more.
You have a user who takes his laptop home every day after work. When he's working in the office, the laptop must get an IP address from the DHCP server so you configure it to obtain IP and DNS information automatically. When he's working from home, the laptop must use IP and DNS information that connects with his home network.Which IP addressing method can you use to make sure he gets a network connection at home?
Answer:
Alternate IP configuration
Explanation:
Based on the information provided within the question it can be said that the best method that can be used would be Alternate IP configuration. This is a feature that is implemented in most adapter's TCP/IP settings, which allows the individual computer to switch to a new and specific IP address that will allow that computer to communicate with various devices in the private network. This also allows the network adapter to pull the address that is needed from the DHCP server, such as the individual in this scenario needs.
You have a team of desktop support specialists to help you manage the needs of a large department. You want a few of the less-experienced specialists to be able to help you support users when they need their TCP/IP configuration modified or their IP addresses released or renewed.You don't want to give them the unrestricted access that comes with being a member of the Administrators group if you don't have to.Which built-in Windows group should they be assigned to?
Answer:
Network Configuration Operators
Explanation:
Based on the information provided within the question it can be said that in Windows, especially Windows 10 these individuals can be assigned to the Network Configuration Operators in the build-in windows group. This group will give them the access they need to be able to modify network configurations such as modifying or renewing IP addresses, but will not give them access to other Administrator privileges.
Which devices are often used inside of tablets to store data on these devices?
Flash drive
Hybrid drive
MicroSD card
SSD
Answer:
D
Explanation:
Current tables such as the new iPads use solid state drives to store data.
Describe how you could obtain a statistical profile of the amount of time spent by a program executing different sections of its code. Discuss the importance of obtaining such a statistical profile
Answer:
Explanation:
It can be said that the best way to obtain such a statistical profile would be to issue a periodic timer interrupt, then you would simply need to monitor which what code was running when the interruption took place. This information is especially helpful to the programmers as it would allow them to optimize the specific sections of the code that are consuming the most CPU resources, and thus making the overall program more efficient.
Which of the following is not the name of a java wrapper class from the Java API?
-byte
-Int
-Long
-Boolean
I am confused on this one
Answer:
Int
byte
Explanation:
In java there are eight primitive data types has a class dedicated, and then we can find eight wrapper classes, I'm going to let you the next table with the 8 example:
Assume the next table byte and Int are primitive data, the different with byte is only the capital letter Byte.
Primitive Wrapper Class
boolean Boolean
byte Byte
char Character
int Integer
float Float
double Double
long Long
short Short
Help! I turned on my computer and this screen came on out of nowhere, I don't know what to do to fix it.
Here are the steps I would do:
Do a "hard" power off. Hold the power key until the screen turns off. Wait 10 seconds. Turn it on. If it still shows the screen... then i'm not sure.
The error is occurring because it has nothing to boot off of. It's probably something wrong with your hardware. The instructions say for you to insert a "boot disk" and press any key.
Answer:
Your boot device is corrupted
Explanation: Please use startup repair if you have data on hard drive ,if data is not problem please reinstall os .
When you create a class and want to include the capability to compare its objects so they can use the Array.Sort() or Array.binarySearch() method, you must _________
a.) Include at least one numberic field within the class
b.) Write a CompareTo() method for the class
c.) Be careful not to override the existing IComparable.CompareTo() method
d.) Two of these are true
Answer:
Option B.
Explanation:
It is the String function of the Java Programming Language that is used to replace the string characters from the Unicode value for matching of both the strings are similar, it results 0, otherwise, it results positive or negative number.
So, CompareTo() function is used to match objects of Array.Sort() or Array.binarySearch() function.
A(n) ____ instruction might look like a meaningless string of 0s and 1s, but it actually represents specific operations and storage locations.
Answer:
Machine Language
Explanation:
Machine language is a collection of binary digits or bits that the computer reads and interprets.Machine language is the lowest-level programming language (except for computers that utilise programmable microcode). Machine language is the only language a computer is capable of understanding. The exact machine language for a program or action can differ by operating system on the computer. The specific operating system will dictate how a compiler writes a program or action into machine language.
Cisco's acquisition of Pure Digital, makers of the Flip video camera line, was largely considered a flop because comparable technology soon became a feature in other popular consumer electronics products.True / False.
Answer:
True
Explanation:
Answer:
True
Explanation:
Cisco is a tech company that is focused on information technology devices development and sales. It has dominated the networking technology industry for many year and are wide used around the world in IT sectors.
They purchased the pure digital company for their flip video camera line, which was a portable mobile camera.
But as smartphones evolved, so many features like the GPS, radio, wifi, recorder and including cameras were integrated to these phones, Cisco shutdown the company to focus on their company line.
Employee badges are encoded with a private encryption key and specific personal information.
The encoding is then used to provide access to the network. Which of the following describes this access
control type?
A. Smartcard
B. Token
C. Discretionary access control
D. Mandatory access control
Answer:
Option A is the correct answer for the above question.
Explanation:
The above question states that there is some encoded information provided to the employee to access the internet. So how it can be provided. So it is provided with the help of a Smartcard. It is because the smart card is used to hold the secret information which can understand by the swap machine only and it helps the employee to access the internet. So option A is the correct while the other is not because:-
Option B states about the token which is used for the one time only.Option C states about the "Discretionary access control", which is a mechanism to secure the information.Option D states about the Mandatory access control, which is also a mechanism to secure the information.A PHP variable name a. can be a PHP reserved word b. can start with a letter, a digit, or two underscores c. can contain special characters d. is case-sensitive
Answer:
The correct answers are c. can contain special characters d. is case-sensitive
Explanation:
Variable can be referred to as a container used for storing values such as numeric values, memory addresses, characters, character string so it can be used in any part of the program. Every programming language has rules that you must strictly follow while naming a variable, and some of the rules for naming variable in PHP are A variable name can contain letters, numbers, and characters after the first character and A variable name is case sensitive.
The PCI sound card in your computer has stopped working. You decide to use the motherboard's integrated sound until you can replace the PCI sound card. After removing the PCI sound card and powering on the computer, you have no sound, and the built-in sound card does not show up in Device Manager. Which should you do to solve the issue?
Keep the PCI sound card in until you get a new one, otherwise you will not have sound. The integrated sound still requires some kind of sound card.
Final answer:
To resolve the issue with the unrecognized integrated sound card, check and enable it in BIOS settings, examine Device Manager for hardware conflicts, ensure proper drivers are installed, and consider a system restore or contacting support.
Explanation:
When the integrated sound card is not recognized after removing a PCI sound card, you'll need to perform a few troubleshooting steps. Firstly, ensure that the integrated sound card is enabled in the BIOS settings. You might need to restart your computer and press a specific key (such as F2, Del, or F10) to enter the BIOS setup. Once there, look for audio settings and ensure the onboard audio is enabled.
Next, check for hardware conflicts or issues in Device Manager, even though the sound card is not listed. View hidden devices to ensure there are no conflicts with the sound card's drivers. If necessary, install the correct drivers for your motherboard's audio chipset from the manufacturer's website.
If the problem persists, consider performing a system restore to a point when the sound was working, or consult the motherboard manual for troubleshooting tips, or contact customer support for your motherboard.
Which method do software testers use to isolate new code from the rest of the network during the test stage of the software development life cycle (SDLC)? Sandboxing Obfuscation Encryption Code signing
Answer:
Sandboxing.
Explanation:
SDLC or software development life cycle is a systematic approach to software development. It marks the birth and death of an application.
The application development starts from the research of the properties of the application to the design and development or implementation of the application.
After the implementation of the software, it is tested, comparing the design and the codes in the development process. The sandboxing testing process helps to isolate and test new lines of code added during the testing phase.
Question _.1 with 1 blankMiguel y Maru están muy cansados. Question 2 with 1 blankFelipe es muy joven. Question 3 with 1 blankJimena es muy inteligente. Question 4 with 1 blankLa madre de Marissa está muy contenta. Question 5 with 1 blankEstoy muy aburrido.
Answer:
Miguel y Maru están muy cansados. - Miguel y Maru están cansadísimos
Felipe es muy joven. - Felipe es jovencísimo
Jimena es muy inteligente. - Jimena es inteligentísima
La madre de Marissa está muy contenta. - La madre de Marissa está contentísima
Estoy muy aburrido. - Estoy aburridísimo
Explanation:
In this activity we have to switch the statements to the absolute superlative of the expressions. In Spanish we can add the suffix -ísimo to an adjective to refer to the highest degree of something. It can be translated in ENglish to "really, extremely, super or quie". The statements in English are:
- Miguel and Maru are very tired - Miguel and Mary are extremely tired
- Felipe is very young - Felipe is super young
- Jimena is very smart - Jimena is really smart
- Marissa´s mother is very happy - Marissa´s mother is extremely happy
- I´m very bored - I´m super bored
[True/False] Mainframes, unlike microcomputers, allow users unlimited and flexible access to computing power.
Answer:
The given statement is "False".
Explanation:
Mainframes computer are also known big iron computer basically Mainframe computer is used by the big organization when the organization needs to work in the high-level project. The mainframe has big data processing. It is highly used in critical applications such as ERP(Enterprise resource planning).
A mainframe computer is not a flexible computer also they are not potable .microcomputers, are more flexible computers we can easily work on the microcomputers.
So the given statement is False.