Answer:
see explanation...
Explanation:
Mg⁺²-24 Co⁺³-60 Clˉ-35
Protons (p⁺) 12 27 17
Neutrons (n⁰) 12 33 18
Electrons (eˉ) 10 24 18
(c) (b) (a)
12/2 : 12/2 : 10/2 27/3 : 33/3 : 24/3 #n⁰ = 18
6 : 6 : 5 9 : 11 : 8 #eˉ = 18
The specs that match the conditions are 24Mg2+ for equal neutrons and electrons, 47Cr for the 9:11:8 proton:neutron:electron ratio, and 35Cl- for having neutrons equal to protons plus one-half the electrons.
Explanation:The question is asking for the species that match specific sets of conditions related to the number of its protons, electrons, and neutrons. In atomic structure, the number of protons defines the atomic number of an element, while the number of electrons defines its charge. The number of neutrons can be found by subtracting the atomic number from the atomic mass.
(a) For a species with equal numbers of neutrons and electrons, we can choose 24Mg2+. Its atomic number is 12, so it has 12 protons. Since it’s a +2 ion, it has lost 2 electrons thus leaving it with 10 electrons. Also, it has 24-12=12 neutrons.
(b) For a species that has protons, neutrons, and electrons in the ratio 9:11:8, we can choose 47Cr. Chromium (Cr) has an atomic number of 24 so it has 24 protons, and 47-24=23 neutrons, and as neutral atom it has 24 electrons. Although not exact, it’s the closest among the choices given.
(c) Finally, a species with a number of neutrons equal to the number of protons plus one-half the number of electrons would be 35Cl-. Chlorine ordinarily has 17 protons and 17 electrons, but as a -1 ion, it has gained 1 extra electron, giving a total of 18 electrons. Half of this is 9. The 17 protons plus the 9 gives 26, which is the number of neutrons in chlorine-35 (35-17=18).
Learn more about Atomic Structure here:https://brainly.com/question/33054877
#SPJ3
At this point Ron is slightly confused, this isn’t surprising. However, Hermione is doing rather well with them. This also isn’t surprising since she studies every day, as should all students. She feels she can help him understand these problems by working with him though another: A 1.00 L sample of dry air contains 0.0319 mol N2, 0.00856 mol O2, and 0.000381 mol Ar. If temperature is 25.0◦C what is the partial pressure of N2? Express your answer in atmospheres.
Answer:
[tex]\boxed{\text{0.780 atm}}[/tex]
Explanation:
Hermione is pretty smart. She realizes that, according to Dalton's Law of Partial Pressures, each gas exerts its pressure independently of the others, as if the others weren't even there.
She shows Ron how to use the Ideal Gas Law to solve the problem.
pV = nRT
She collects the data:
V = 1.00 L; n = 0.0319 mol; T = 25.0 °C
She reminds him to convert the temperature to kelvins
T = (25.0 +273.15) K = 298.15 K
Then she shows him how to do the calculation.
[tex]p \times \text{1.00 L} = \text{0.0319 mol} \times \text{L}\cdot\text{atm}\cdot\text{0.082 06 K}^{-1}\text{mol}^{-1} \times \text{298.15 K}\\\\1.00p = \text{0.7805 atm}\\\\p = \textbf{0.780 atm}\\\\\text{The partial pressure of the nitrogen is } \boxed{\textbf{0.780 atm}}[/tex]
Isn't she smart?
The partial pressure of N2 is 0.78 atm.
The following are information contained in the question;
Volume (V) = 1.00 L
Total number of moles of the gases(n) = Number of moles of N2 + Number of moles of O2 + Nuber of moles of Ar = 0.0319 mol + 0.00856 mol + 0.000381 mol = 0.041 moles
Temperature(T) = 25.0◦C + 273 = 298 K
Using PV = nRT
Where;
P = pressure of the gas (the unknown)
V = volume of the sample = 1.00 L
T = absolute temperature = 298K
R = molar gas constant = 0.082 atmLK-1Mol-1
n = total number of moles present = 0.041 moles
Making P the subject of the formula and substituting values;
P = nRT/V
P = 0.041 moles × 0.082 atmLK-1Mol-1 × 298 K/1.00 L
P = 1 atm
Recall that partial pressure = mole fraction × total pressure
Mole fraction of N2 = 0.00856 mol /0.00856 mol + 0.0319 mol + 0.000381 mol =
Partial pressure of N2 =0.0319 mol /0.041 moles × 1 atm
Partial pressure of N2 = 0.78 atm
Learn more: https://brainly.com/question/13164491
A gas mixture contains 1.20 g N2 and 0.77 g O2 in a 1.65-L container at 15 ∘C. Part A Calculate the mole fraction of N2. Express your answer using two significant figures. X1 X 1 = nothing Request Answer Part B Calculate the mole fraction of O2. Express your answer using two significant figures. X2 X 2 = nothing Request Answer Part C Calculate the partial pressure of N2. Express your answer using two significant figures. P1 P 1 = nothing atm Request Answer Part D Calculate the partial pressure of O2. Express your answer using two significant figures. P2 P 2 = nothing atm Request Answer Provide Feedback
Explanation:
Moles of nitrogen gas = [tex]n_1=\frac{1.20 g}{28 g/mol}=0.0428 mol[/tex]
Moles of oxygen gas = [tex]n_2=\frac{0.77 g}{32 g/mol}=0.0240 mol[/tex]
Mole fraction of nitrogen gas=[tex]\chi_1=\frac{n_1}{n_1+n_2}[/tex]
[tex]\chi_1=\frac{0.0428 mol}{0.0428 mol+0.0240 mol}=0.6407\approx 0.64[/tex]
Mole fraction of oxygen gas=[tex]\chi_2=1-\chi_1=1-0.6407=0.3593\approx 0.36[/tex]
Total umber of moles in container :
n =[tex]n_1+n_2[/tex]= 0.0428 mol + 0.0240 mol = 0.0668 mol
Volume of the container = V = 1.65 L
Temperature of the container = T = 15°C = 288.15 K
Total pressure in the container = P
Using an ideal gas equation:
[tex]PV=nRT[/tex]
[tex]P=\frac{0.0668 mol\times 0.0821 atm L/mol k\times 288.15 K}{1.65 L}[/tex]
P = 0.9577 atm
Partial pressure of nitrogen gas = [tex]p^{o}_1[/tex]
Partial pressure of nitrogen gas = [tex]P^{o}_2[/tex]
Partial pressure of nitrogen gas and oxygen gas can be calculated by using Dalton's law of partial pressure:
[tex]p^{o}_i=p_{total}\times \chi_i[/tex]
[tex]p^{o}_1=P\times \chi_1=0.6135 atm\approx 0.61 atm[/tex]
[tex]p^{o}_2=P\times \chi_2=0.3441 atm\approx 0.34 atm[/tex]
24. A sports ball is inflated to an internal pressure of 1.85 atm at room temperature (25 °C). If the ball is then played with outside where the temperature is 7.5 °C, what will be the new pressure of the ball? Assume the ball does not change in volume nor does any air leak from the ball A) 0.555 atm B) 1.74 atm C) 1.85 atm D) 1.97 atm
Answer: The correct answer is Option B.
Explanation:
To calculate the final pressure of the system, we use the equation given by Gay-Lussac Law. This law states that pressure of the gas is directly proportional to the temperature of the gas at constant volume.
Mathematically,
[tex]\frac{P_1}{T_1}=\frac{P_2}{T_2}[/tex] (at constant volume)
where,
[tex]P_1\text{ and }T_1[/tex] are the initial pressure and temperature of the gas.
[tex]P_2\text{ and }T_2[/tex] are the final pressure and temperature of the gas.
We are given:
Conversion factor: [tex]T(K)=T(^oC)+273[/tex]
[tex]P_1=1.85atm\\T_1=25^oC=(25+273)K=298K\\P_2=?atm\\T_2=7.5^oC=(7.5+273)K=280.5[/tex]
Putting values in above equation, we get:
[tex]\frac{1.85atm}{298K}=\frac{P_2}{280.5K}\\\\P_2=1.74atm[/tex]
Hence, the correct answer is Option B.
Final answer:
Using Gay-Lussac's Law, after converting the temperatures to Kelvin and applying the given initial pressure and temperatures, the new pressure of the sports ball when the temperature drops to 7.5 °C is calculated to be B) 1.74 atm.
Explanation:
The problem you've presented involves the concept of gas laws, specifically Gay-Lussac's Law, which states that the pressure of a gas varies directly with its absolute temperature, provided the volume does not change. This law can be mathematically represented as P1/T1 = P2/T2, where P1 and P2 are the initial and final pressures, and T1 and T2 are the initial and final temperatures in Kelvin.
To solve for the new pressure (P2), we first convert the temperatures from °C to Kelvin: T1 = 25 °C + 273.15 = 298.15 K, and T2 = 7.5 °C + 273.15 = 280.65 K. Then we rearrange the formula to solve for P2: P2 = P1 * (T2/T1). Substituting the given values, P2 = 1.85 atm * (280.65 K / 298.15 K) = 1.74 atm.
Given the following equation: 4 NH3 (g)5 O2 (g) > 4 NO (g) 6 H20 () + How many moles of H20 is produced if 0.44 mol of NH3 reacts?
Answer : The number of moles of [tex]H_2O[/tex] produced are, 0.66 mole.
Explanation : Given,
Given moles of [tex]NH_3[/tex] = 0.44 mole
The given balanced chemical reaction is,
[tex]4NH_3(g)+5O_2(g)\rightarrow 4NO(g)+6H_2O(g)[/tex]
From the given balanced chemical reaction, we conclude that
As, 4 moles of [tex]NH_3[/tex] react to give 6 moles of [tex]H_2O[/tex]
So, 0.44 moles of [tex]NH_3[/tex] react to give [tex]\frac{6}{4}\times 0.44=0.66[/tex] moles of [tex]H_2O[/tex]
Therefore, the number of moles of [tex]H_2O[/tex] produced are, 0.66 mole.
Temperature is defined as a. the equivalent of heat. b. a measure of the average kinetic energy of the individual atoms or molecules composing a substance. c. how hot or cold it is. d. the total kinetic energy of the atoms or molecules composing a substance. e. None of the above is correct.
Temperature is defined as a measure of the average kinetic energy of the individual atoms or molecules composing a substance.
The initial concentration of fluoride ions in an aqueous solution is 2.00 M and the initial concentration of Al3+ ions is 0.15 M. After the solution has reached equilibrium what is the concentration ofAl3+, F- , and AlF6 3- ? Kf for [AlF6] 3- = 4.0 x 1019 .
Answer: [tex][Al^{3+}][/tex] = 1.834 M
[tex][F^-][/tex] = 0.004 M
[tex][AlF_6^{3-}][/tex] = 0.166 M
Explanation:
[tex]Al^{3+}+6F^-\rightleftharpoons AlF_6^{3-}[/tex]
Initial concentration of [tex]Al^{3+}[/tex] = 0.15 M
Initial concentration of [tex]F^-[/tex] = 2.0 M
The given balanced equilibrium reaction is,
[tex]Al^{3+}+6F^-\rightleftharpoons AlF_6^{3-}[/tex]
Initial conc. 2 M 0.15 M 0
At eqm. conc. (2-x) M (1-6x) M (x) M
The expression for equilibrium constant for this reaction will be,
[tex]K_f=\frac{[AlF_6^{3-}]}{[Al^{3+}][F^-]^6}[/tex]
Now put all the given values in this expression, we get :
[tex]4.0\times 10^{19}=\frac{(x)}{(2-x)\times (1-6x)^6}[/tex]
By solving the term 'x', we get :
[tex]x=0.166[/tex]
[tex][Al^{3+}][/tex] = (2-x) = 2-0.166 = 1.834 M
[tex][F^-][/tex] = (1-6x) = 1-6(0.1660)= 0.004 M
[tex][AlF_6^{3-}][/tex] = x = 0.166 M
The tendency of water molecules to stick together is referred to as ______. A) adhesion B) polarity C) cohesion D) transpiration E) evaporation
Answer:
Cohesion
Explanation:
Think of it like this. The water molecules STICK TOGETHER, so they COoperate.
COhesion COoperate
Cohesion is the tendency of water molecules to stick together, due to hydrogen bonding. It is a unique property of water that plays a vital role in living organisms and the environment.
Explanation:
The tendency of water molecules to stick together is referred to as cohesion. This process occurs due to hydrogen bonding between the water molecules, where the slightly positive hydrogen of one water molecule is attracted to the slightly negative oxygen of a neighboring water molecule. Thus, creating a force that holds these molecules together. It is one of the unique properties of water that contributes to its important role in living organisms and the environment. Some other terms related to water are adhesion, which is the tendency of water to stick to other substances; polarity, which is the property of having oppositely charged ends; transpiration, which is the process by which water evaporates from the leaves of plants; and evaporation, which is the change of state from liquid to gas.
Learn more about Cohesion here:https://brainly.com/question/31929367
#SPJ6
When two solutions that differ in solute concentration are placed on either side of a selectively permeable membrane, and osmosis is allowed to take place, the water will ______. exhibit a net movement to the side with lower water concentration exhibit a net movement to the side with higher water concentration exhibit a net movement to the side with lower solute concentration exhibit an equal movement in both directions across the membrane not cross the membrane
Answer:
In osmosis, the water has a net movement to the side with lower water concentration.
Explanation:
It moves in the direction of a solution with higher solute ( therefore lower water) concentration.
Answer:
Exhibit a net movement to the side with lower water concentration.
Explanation:
Hello,
Osmosis is a process by which the equilibrium between the concentration of a solute placed at two sides separated by a permeable membrane is reached by moving the solvent's molecules.
For the considered example, it is seen that the water will exhibit a net movement to the side with lower water concentration as long as the place with more water will have a higher solute's concentration which implies that the water move from such side to other one in order to equal both the solutions concentrations.
Best regards.
8) A mixture of He, Ne and Ar has a pressure of 7.85 atm. If the Ne has a mole fraction of 0.47 and 8) Ar has a mole fraction of 0.23, what is the pressure of He? A) 4.2 atm B) 3.7 atm C) 5.5 atm D) 2.4 atm E) 1.8 atm
Answer: The correct answer is Option D.
Explanation:
To calculate the pressure of the Helium gas, we use the equation:
[tex]p_i=\chi \times P[/tex]
where,
[tex]p_i[/tex] = partial pressure of the gas
[tex]\chi[/tex] = mole fraction of the gas
P = total pressure
We are given:
Sum of all the mole fraction is always equal to 1.
[tex]\chi_{Ne}=0.47\\\chi_{Ar}=0.23\\\chi_{He}=(1-(0.47+0.23))=0.3\\P=7.85atm[/tex]
Putting values in above equation, we get:
[tex]p_i=0.3\times 7.85=2.4atm[/tex]
Hence, the correct answer is Option D.
To find the pressure of He in the mixture, calculate the mole fraction of He by subtracting the mole fractions of Ne and Ar from 1. Then, use Dalton's law of partial pressures to find the pressure of He by multiplying the total pressure of the mixture by the mole fraction of He.
Explanation:To find the pressure of He in the mixture, we need to first calculate the mole fraction of He. Since the mole fractions of Ne and Ar are given, we can calculate the mole fraction of He by subtracting their mole fractions from 1.
Therefore, the mole fraction of He is
1 - 0.47 - 0.23 = 0.3.
Next, we can use Dalton's law of partial pressures to find the pressure of He. According to Dalton's law, the total pressure of a mixture of gases is equal to the sum of the partial pressures of each gas. Since we know the total pressure of the mixture is 7.85 atm, we can set up the equation:
Pressure of He = Total pressure of mixture × Mole fraction of He = 7.85 atm × 0.3 = 2.355 atm.
Therefore, the pressure of He is approximately 2.4 atm (option D).
Learn more about Pressure of gases here:https://brainly.com/question/30931993
#SPJ3
CO2(g)+CCl4(g)⇌2COCl2(g) Calculate ΔG for this reaction at 25 ∘C under these conditions: PCO2PCCl4PCOCl2===0.140 atm0.185 atm0.735 atm ΔG∘f for CO2(g) is −394.4kJ/mol, ΔG∘f for CCl4(g) is −62.3kJ/mol, and ΔG∘f for COCl2(g) is −204.9kJ/mol.
Answer: The [tex]\Delta G[/tex] for the reaction is 54.425 kJ/mol
Explanation:
For the given balanced chemical equation:
[tex]CO_2(g)+CCl_4(g)\rightleftharpoons 2COCl_2(g)[/tex]
We are given:
[tex]\Delta G^o_f_{CO_2}=-394.4kJ/mol\\\Delta G^o_f_{CCl_4}=-62.3kJ/mol\\\Delta G^o_f_{COCl_2}=-204.9kJ/mol[/tex]
To calculate [tex]\Delta G^o_{rxn}[/tex] for the reaction, we use the equation:
[tex]\Delta G^o_{rxn}=\sum [n\times \Delta G_f(product)]-\sum [n\times \Delta G_f(reactant)][/tex]
For the given equation:
[tex]\Delta G^o_{rxn}=[(2\times \Delta G^o_f_{(COCl_2)})]-[(1\times \Delta G^o_f_{(CO_2)})+(1\times \Delta G^o_f_{(CCl_4)})][/tex]
Putting values in above equation, we get:
[tex]\Delta G^o_{rxn}=[(2\times (-204.9))-((1\times (-394.4))+(1\times (-62.3)))]\\\Delta G^o_{rxn}=46.9kJ=46900J[/tex]
Conversion factor used = 1 kJ = 1000 J
The expression of [tex]K_p[/tex] for the given reaction:
[tex]K_p=\frac{(p_{COCl_2})^2}{p_{CO_2}\times p_{CCl_4}}[/tex]
We are given:
[tex]p_{COCl_2}=0.735atm\\p_{CO_2}=0.140atm\\p_{CCl_4}=0.185atm[/tex]
Putting values in above equation, we get:
[tex]K_p=\frac{(0.735)^2}{0.410\times 0.185}\\\\K_p=20.85[/tex]
To calculate the gibbs free energy of the reaction, we use the equation:
[tex]\Delta G=\Delta G^o+RT\ln K_p[/tex]
where,
[tex]\Delta G[/tex] = Gibbs' free energy of the reaction = ?
[tex]\Delta G^o[/tex] = Standard gibbs' free energy change of the reaction = 46900 J
R = Gas constant = [tex]8.314J/K mol[/tex]
T = Temperature = [tex]25^oC=[25+273]K=298K[/tex]
[tex]K_p[/tex] = equilibrium constant in terms of partial pressure = 20.85
Putting values in above equation, we get:
[tex]\Delta G=46900J+(8.314J/K.mol\times 298K\times \ln(20.85))\\\\\Delta G=54425.26J/mol=54.425kJ/mol[/tex]
Hence, the [tex]\Delta G[/tex] for the reaction is 54.425 kJ/mol
The change in free energy for the reaction is 54.4 kJ/mol.
What is change in free energy?The change in free energy under nonstandard conditions can be obtained from the chage in free energy under standard conditions using the formula;
ΔG = ΔG° + RTlnK
Now ΔG° is obtained from;
ΔG°reaction = 2[−204.9kJ/mol] - [(−394.4kJ/mol) + (−62.3kJ/mol)]
ΔG°reaction =(-409.8) + 456.7
ΔG°reaction = 46.9 kJ/mol
Q =PCOCl2^2/ PCO2 * PCCl4
Q = (0.735)^2/ 0.140 * 0.185
Q = 20.8
ΔG = 46.9 * 10^3 + [8.314 * 298 * ln(20.8)]
ΔG = 54.4 kJ/mol
Learn more about free energy: https://brainly.com/question/1298425
A mixture initially contains A, B, and C in the following concentrations: [A] = 0.300 M , [B] = 1.05 M , and [C] = 0.550 M . The following reaction occurs and equilibrium is established: A+2B⇌C At equilibrium, [A] = 0.140 M and [C] = 0.710 M . Calculate the value of the equilibrium constant, Kc.
Answer:
Kc = 9.52.
Explanation:
The equilibrium system:A + 2B ⇌ C,
Kc = [C]/[A][B]²,
Concentration: [A] [B] [C]
At start: 0.3 M 1.05 M 0.55 M
At equilibrium: 0.3 - x 1.05 - 2x 0.55 + x
0.14 M 1.05 - 2x 0.71 M
For the concentration of [A]:∵ 0.3 M - x = 0.14 M.
∴ x = 0.3 M - 0.14 M = 0.16 M.
∴ [B] at equilibrium = 1.05 - 2x = 1.05 M -2(0.16) = 0.73 M.
∵ Kc = [C]/[A][B]²
∴ Kc = (0.71)/(0.14)(0.73)² = 9.5166 ≅ 9.52.
The overall energy involved in the formation of CsCl from Cs(s) and Cl2(g) is −443 kJ/mol. Given the following information: heat of sublimation for Cs is +76 kJ/mol, bond dissociation energy for 12Cl2 is +121 kJ/mol, Ei1 for Cs is +376 kJ/mol, and Eea for Cl(g) is −349 kJ/mol. what is the magnitude of the lattice energy for CsCl? Express your answer numerically in kilojoules per mole.
Answer:
-667Kj see attached
Explanation:
Final answer:
To find the lattice energy for CsCl, we sum the given energies related to sublimation, bond dissociation, ionization, and electron affinity, then subtract the overall energy of formation. The magnitude of lattice energy for CsCl is calculated to be 624 kJ/mol.
Explanation:
To calculate the lattice energy for CsCl, we can use the provided enthalpy values in a Born-Haber cycle. We have:
Heat of sublimation for Cs: +76 kJ/mol
Bond dissociation energy for 1/2Cl₂: +121 kJ/mol
Ionization energy (Ei1) for Cs: +376 kJ/mol
Electron affinity (Eea) for Cl:
349 kJ/mol
Overall energy for the formation of CsCl:
443 kJ/mol
The lattice energy is the remaining term that balances the Born-Haber cycle equation, which summarizes the energy changes that occur when an ionic solid forms. Thus, we calculate the lattice energy (U) using the equation:
U = Sublimation energy + Bond dissociation energy + Ionization energy + Electron affinity + Formation energy
U = 76 kJ/mol + 121 kJ/mol + 376 kJ/mol - 349 kJ/mol - 443 kJ/mol
U = 624 kJ/mol, which is the magnitude of the lattice energy for CsCl.
Two substances, A and B, initially at different temperatures, come into contact and reach thermal equilibrium. The mass of substance A is 6.07 g and its initial temperature is 20.7 ∘C. The mass of substance B is 26.1 g and its initial temperature is 52.8 ∘C. The final temperature of both substances at thermal equilibrium is 47.0 ∘C. Part A If the specific heat capacity of substance B is 1.17 J/g⋅∘C, what is the specific heat capacity of substance A? Express your answer using two significant figures.
Try this suggested solution (the figures are not provided).
The answer is marked with red colour.
Answer: The specific heat of substance A is 1.1 J/g°C
Explanation:
When substance A is mixed with substance B, the amount of heat released by substance B (initially present at high temperature) will be equal to the amount of heat absorbed by substance A (initially present at low temperature)
[tex]Heat_{\text{absorbed}}=Heat_{\text{released}}[/tex]
The equation used to calculate heat released or absorbed follows:
[tex]Q=m\times c\times \Delta T=m\times c\times (T_{final}-T_{initial})[/tex]
[tex]m_1\times c_1\times (T_{final}-T_1)=-[m_2\times c_2\times (T_{final}-T_2)][/tex] ......(1)
where,
q = heat absorbed or released
[tex]m_1[/tex] = mass of substance A = 6.07 g
[tex]m_2[/tex] = mass of substance B = 26.1 g
tex]T_{final}[/tex] = final temperature = 47.0°C
[tex]T_1[/tex] = initial temperature of substance A = 20.7°C
[tex]T_2[/tex] = initial temperature of substance B = 52.8°C
[tex]c_1[/tex] = specific heat of substance A = ?
[tex]c_2[/tex] = specific heat of substance B = 1.17 J/g°C
Putting values in equation 1, we get:
[tex]6.07\times c_1\times (47-20.7)=-[26.1\times 1.17\times (47-52.8)][/tex]
[tex]c_1=1.1J/g^oC[/tex]
Hence, the specific heat of substance A is 1.1 J/g°C
Which of the following has potential energy but no kinetic energy? Longitudinal sound waves An arrow shot from a bow A compressed spring A vibrating atom
Answer:
A compressed spring
Explanation:
A compressed spring has potential energy only and no kinetic energy.
This is because kinetic energy is only possessed by particles in motion.
Energy in a compressed spring= -1/2kx² where x is the displacement.
In this equation there is no velocity so there is no kinetic energy.
Answer:
A compressed spring
Explanation:
Option C is correct. The potential energy is the energy stored in a compressed spring. This potential energy depends on the spring constant and the distance traveled by the spring as it is stretched. The work that is done in stretching a spring gets stored in the compressed spring as potential energy.
Option A is incorrect. As sound wave is a mechanical wave that carries both potential and kinetic energy.
Option B is incorrect. Arrow shot from a bow has kinetic energy.
Option D is incorrect. A vibrating atom has vibrational energy.
Cyclobutane decomposes to ethylene according to the equation: C4H8(g) → 2C2H4(g) Determine the value of the rate constant for the reaction based on the following pressures, which were recorded when the reaction was carried out at 430°C in a constant-volume vessel. × 10 s−1 (Enter your answer in scientific notation.) Time(s) mmHg 0 400 2000 316 4000 248 6000 196 8000 155 10000 122
Answer:
[tex]\boxed{1.19 \times 10^{-4} \text{ s}^{-1}}[/tex]
Explanation:
1. Determine the order of reaction
The question gives us a hint: the units of k are s⁻¹. This suggests a first order rate law.
To confirm, we plot ln(p) vs t. We should get a straight line with slope = -k.
Here are your data with the pressures converted to natural logarithms.
[tex]\begin{array}{rcc}\textbf{t/s} & \textbf{p/mmHg} &\textbf{ln(p)}\\0 & 400 & 5.99\\2000 & 316 & 5.76\\4000 & 248 & 5.51\\6000 & 196 & 5.28\\8000 & 155 & 5.04\\10000 & 122 & 4.80\\\end{array}[/tex]
We get the graph shown below.
2. Determine the rate constant
The points fit so well that we can just use the end points to determine the slope.
[tex]\text{slope} = \dfrac{y_{2} - y_{1}}{ x_{2} - x_{1} } = \dfrac{4.80 - 5.99}{10 000 - 0} = -1.19 \times 10^{-4} \text{ s}^{-1}}\\\\k = \boxed{1.19 \times 10^{-4} \text{ s}^{-1}}[/tex]
The value of the rate constant for the reaction based on the given pressures = [tex]1.19 * 10^{-4} s^{-1}[/tex]
First step : determine the order of reaction
The reaction is a first-order reaction because the S.I. unit of K = s⁻¹ in the question
next step : Plot the value of In( p ) vs Time
Where: P = pressure ( mmHg )
In ( p ) = natural Logarithm of P values
Graph is attached below
Final step : calculate the value of the slope of the graph
slope = Δ y / Δ x
= ( 4.8 - 5.99 ) / ( 10000 - 0 )
= -1.19 / 10000
∴ The value of K ( rate constant ) = 1.19 * 10^{-4} s^{-1}
Hence we can conclude that the The value of the rate constant for the reaction based on the given pressures = [tex]1.19 * 10^{-4} s^{-1}[/tex]
Learn more : https://brainly.com/question/17940028
Hydrogenation reactions, in which H2 and an "unsaturated" organic compound combine, are used in the food, fuel, and polymer industries. In the simplest case, ethene (C2H4) and H2 form ethane (C2H6). If 140 kJ is given off per mole of C2H4 reacting, How much heat (in MJ) is released when 12 kg of C2H6 forms?
Answer: The amount of heat released is 56 MJ.
Explanation:
To calculate the number of moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
Given mass of [tex]C_2H_6[/tex] = 12 kg = 12000 g (Conversion factor: 1 kg = 1000 g)
Molar mass of [tex]C_2H_6[/tex] = 30 g/mol
Putting values in above equation, we get:
[tex]\text{Moles of }C_2H_6=\frac{12000g}{30g/mol}=400mol[/tex]
The chemical reaction for hydrogenation of ethene follows the equation:
[tex]C_2H_4+H_2\rightarrow C_2H_6[/tex]
By Stoichiometry of the reaction:
When 1 mole of ethane releases 140 kJ of heat.
So, 400 moles of ethane will release = [tex]\frac{140}{1}\times 400=56000kJ[/tex] of heat.
Converting this into Mega joules, using the conversion factor:
1 MJ = 1000 kJ
So, [tex]\Rightarrow 56000kJ\times (\frac{1MJ}{1000kJ})=56MJ[/tex]
Hence, the amount of heat released is 56 MJ.
If 5.00 grams of aluminum react with an excess of copper (II) sulfate and the percentage yield is 63.4%, what is the mass of the copper produced? The other product is aluminum sulfate.
Answer : The mass of copper produced will be, 11.796 grams
Explanation : Given,
Mass of [tex]Al[/tex] = 5 g
Molar mass of [tex]Al[/tex] = 26.98 g/mole
Molar mass of [tex]Cu[/tex] = 63.66 g/mole
First we have to calculate the moles of [tex]Al[/tex].
[tex]\text{Moles of }Al=\frac{\text{Mass of }Al}{\text{Molar mass of }Al}=\frac{5g}{26.98g/mole}=0.185moles[/tex]
Now we have to calculate the moles of [tex]Cu[/tex].
The balanced chemical reaction is,
[tex]2Al+3CuSO_4\rightarrow Al_2(SO_4)_3+3Cu[/tex]
From the balanced reaction we conclude that
As, 2 moles of [tex]Al[/tex] react to give 3 moles of [tex]Cu[/tex]
So, 0.185 moles of [tex]Al[/tex] react to give [tex]\frac{3}{2}\times 0.185=0.2775[/tex] moles of [tex]Cu[/tex]
Now we have to calculate the mass of [tex]Cu[/tex].
[tex]\text{Mass of }Cu=\text{Moles of }Cu\times \text{Molar mass of }Cu[/tex]
[tex]\text{Mass of }Cu=(0.2775mole)\times (63.66g/mole)=17.66g[/tex]
The theoretical yield of Cu = 17.66 grams
Now we have to calculate the actual yield of Cu.
[tex]\%\text{ yield of }Cu=\frac{\text{Actual yield of }Cu}{\text{Theoretical yield of }Cu}\times 100[/tex]
Now put all the given values in this formula, we get the actual yield of Cu.
[tex]63.4=\frac{\text{Actual yield of }Cu}{17.66}\times 100[/tex]
[tex]\text{Actual yield of }Cu=11.796g[/tex]
Therefore, the mass of copper produced will be, 11.796 grams
Consider the reaction. CaCl2(aq)+K2CO3(aq)⟶CaCO3+2KCl. Identify the precipitate, or lack thereof, for the reaction. (A) KCl (B) CaCO3 (C) no precipitate
Answer: The correct answer is Option B.
Explanation:
Precipitate is defined as insoluble solid substance that emerges when two different aqueous solutions are mixed together. It usually settles down at the bottom of the solution after sometime.
For the given chemical equation:
[tex]CaCl_2(aq.)+K_2CO_3(aq.)\rightarrow CaCO_3(s)+2KCl(aq.)[/tex]
The products formed in the reaction are calcium carbonate and potassium chloride. Out of the two products, one of them is insoluble which is calcium carbonate. Thus, it is considered as a precipitate.
Hence, the correct answer is Option B.
In the double displacement reaction between CaCl₂ and K₂CO₃, CaCO₃ is the precipitate (B).
Let's consider the following double displacement reaction.
CaCl₂(aq) + K₂CO₃(aq) ⟶ CaCO₃(s) + 2 KCl(aq)
Regarding solubility rules, we know that:
Carbonates are often insoluble (except Group 1 carbonates).Chlorides are often soluble (except AgCl, PbCl₂ and Hg₂Cl₂).Salts with cations from Group 1 are often soluble.With this information, we can conclude that CaCO₃ is a precipitate.
In the double displacement reaction between CaCl₂ and K₂CO₃, CaCO₃ is the precipitate (B).
Learn more: https://brainly.com/question/24158764
Carbon dating. The half-life of C-14 is about 5730 yr. a) Archeologists find a piece of cloth painted with organic dyes. Analysis of the dye in the cloth shows that only 77% of the C-14 originally in the dye remains. When was the cloth painted? b) A well-preserved piece of wood found at an archeological site has 6.2% of the C-14 that it had when it was alive. Estimate when the wood was cut.
Answer:
Case I => %C-14 remaining = 77% => Age of artifact = 2200 yrs
Case II => %C-14 remaining = 6.2% => Age of artifact = 23,000 yrs
Explanation:
Given:
Half-Life C-14 = 5730 yrs
=> Rate Constant = k = 0.693/t(1/2) = (0.693/5730)yrs⁻¹ = 1.2 x 10⁻⁴ yrs⁻¹
NOTE => All radioactive decay is 1st order kinetics.
=> A = A₀eˉᵏᵗ (classic 1st order decay equation)
- A = remaining activity
-A₀ = initial activity
- k = rate constant
- t = time of decay (or, age of object of interest; i.e., not everything is organic but the 1st order decay equation is good for non-organic objects (rocks) also. Analysts just use a different decay standard => K-40 → Ar-40 + β).
Solving the decay equation for time (t) ...
t = ln(A/A₀)/-k
Applying to problem cases...
Case I => %C-14 remaining = 77%
t = ln(A/A₀)/-k = ln(77/100)/-1.2x10⁻⁴ years = 2178 yrs ~ 2200 yrs
Case II => %C-14 remaining = 6.2%
t = ln(A/A₀)/-k = ln(6.2/100)/-1.2x10⁻⁴ years = 23,172 yrs ~ 23,000 yrs
Answer:
[tex]\boxed{\text{a) 2160 yr ago; b) 23 000 yr ago}}[/tex]
Explanation:
Two important equations in radioactive decay are
[tex](1) \qquad \ln \dfrac{N_{0} }{N_{t}} = kt\\\\(2) \qquad t_{\frac{1}{2}} = \dfrac{\ln2}{k }[/tex]
We use them for carbon dating.
a) The dye
Data:
[tex]t_{\frac{1}{2}} = \text{5730 yr}\\\\N_{t} = 0.77 N_{0}[/tex]
Calculations:
[tex]\text{From Equation (2)}\\\\t_{\frac{1}{2}} = \dfrac{\ln2}{\text{5730 yr}} = 1.21 \times 10^{-4} \text{ yr}^{-1}\\\\\text{From Equation (1)}\\\\\ln \dfrac{N_{0} }{0.77N_{0}} = 1.21 \times 10^{-4}t \text{ yr}^{-1}\\\\\ln\dfrac{1}{0.77} = 1.21 \times 10^{-4}t \text{ yr}^{-1}\\\\-\ln0.77 = 0.261 = 1.21 \times 10^{-4}t \text{ yr}^{-1}\\\\t = \dfrac{0.261}{ 1.21 \times 10^{-4} \text{ yr}^{-1}} = \textbf{2160 yr}\\\\\text{The cloth was painted } \boxed{\textbf{2160 yr}}\text{ ago}[/tex]
b) The wood
Data:
[tex]N_{t} = 0.062 N_{0}[/tex]
Calculations:
[tex]\text{From Equation (1)}\\\\\ln \dfrac{N_{0} }{0.062N_{0}} = 1.21 \times 10^{-4}t \text{ yr}^{-1}\\\\\ln\dfrac{1}{0.0.062} = 1.21 \times 10^{-4}t \text{ yr}^{-1}\\\\-\ln0.062 = 2.78 = 1.21 \times 10^{-4}t \text{ yr}^{-1}\\\\t = \dfrac{2.78}{ 1.21 \times 10^{-4} \text{ yr}^{-1}} = \textbf{23 000 yr}\\\\\text{The wood was cut} \boxed{\textbf{23 000 yr}}\text{ ago}[/tex]
An aqueous solution of calcium hydroxide is standardized by titration with a 0.120 M solution of hydrobromic acid. If 16.5 mL of base are required to neutralize 27.5 mL of the acid, what is the molarity of the calcium hydroxide solution?
Answer: The molarity of calcium hydroxide in the solution is 0.1 M
Explanation:
To calculate the concentration of base, we use the equation given by neutralization reaction:
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1,M_1\text{ and }V_1[/tex] are the n-factor, molarity and volume of acid which is [tex]HBr[/tex]
[tex]n_2,M_2\text{ and }V_2[/tex] are the n-factor, molarity and volume of base which is [tex]Ca(OH)_2[/tex]
We are given:
[tex]n_1=1\\M_1=0.120M\\V_1=27.5mL\\n_2=2\\M_2=?M\\V_2=16.5mL[/tex]
Putting values in above equation, we get:
[tex]1\times 0.120\times 27.5=2\times M_2\times 16.5\\\\M_2=0.1M[/tex]
Hence, the molarity of [tex]Ca(OH)_2[/tex] in the solution is 0.1 M.
21. Consider the following chemical reaction: N2+ O2 2 NO If 10.0 g of N2 reacts with excess oxygen then how many grams of NO can be formed? A) 10.7 g B) 21.4 g C) 32.9 g D) 42.8 g Page 4 of 8
Answer: The correct answer is Option B.
Explanation:
To calculate the number of moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ....(1)
For [tex]N_2[/tex]:Given mass of nitrogen gas = 10 g
Molar mass of nitrogen gas = 28 g/mol
Putting values in above equation, we get:
[tex]\text{Moles of iron oxide}=\frac{10g}{28g/mol}=0.357mol[/tex]
The given chemical reaction follows:
[tex]N_2+O_2\rightarrow 2NO[/tex]
As, oxygen gas is present in excess. Thus, it is considered as an excess reagent and nitrogen is considered as a limiting reagent because it limits the formation of products.
By Stoichiometry of the reaction:
1 mole of nitrogen gas produces 2 moles of nitrogen oxide.
So, 0.357 moles of nitrogen gas will produce = [tex]\frac{2}{1}\times 0.357=0.714mol[/tex] of nitrogen oxide.
Now, calculating mass of nitrogen oxide by putting values in equation 1, we get:
Moles of nitrogen oxide = 0.714 mol
Molar mass of nitrogen oxide = 30 g/mol
Putting values in equation 1, we get:
[tex]0.714mol=\frac{\text{Mass of nitrogen oxide}}{30g/mol}\\\\\text{Mass of nitrogen oxide}=21.4g[/tex]
Hence, the correct answer is Option B.
What is the composition, in atom percent, of an alloy that consists of 4.5 wt% Pb and 95.5 wt% Sn? The atomic weights for Pb and Sn are 207.19 g/mol and 118.71 g/mol, respectively.(A) 2.6 at% Pb and 97.4 at% Sn(B) 7.6 at% Pb and 92.4 at% Sn(C)97.4 at% Pb and 2.6 at% Sn(D) 92.4 at% Pb and 7.6 at% Sn
Answer: The correct answer is Option A.
Explanation:
We are given:
4.5 wt % of Pb means that 4.5 grams of lead is present in 100 g of alloy.
95.5 wt % of Sn means that 95.5 grams of tin is present in 100 g of alloy.
To calculate the atom percent of any compound in a mixture, we use the equation:
[tex]\text{atom }\%=\frac{\text{Moles of compound}\times N_A}{\text{Total number of moles of mixture}\times N_A}\times 100[/tex]
where,
[tex]N_A[/tex] = Avogadro's number
Moles of a compound is given by the formula:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
For Lead:Given mass of lead = 4.5 g
Molar mass of lead = 207.19 g/mol
[tex]\text{Atom percent of lead}=\left(\frac{\frac{4.5g}{207.17g/mol}\times N_A}{(\frac{4.5g}{207.17g/mol}+\frac{95.5g}{118.71g/mol})\times N_A}\right)\times 100\\\\\text{Atom percent of lead}=2.6\%[/tex]
For Tin:Given mass of tin = 95.5 g
Molar mass of tin = 118.71 g/mol
[tex]\text{Atom percent of Tin}=\left(\frac{\frac{95.5g}{118.71g/mol}\times N_A}{(\frac{4.5g}{207.17g/mol}+\frac{95.5g}{118.71g/mol})\times N_A}\right)\times 100\\\\\text{Atom percent of Tin}=97.4\%[/tex]
Hence, the correct answer is Option A.
The composition, in atom percent, of an alloy consisting of 4.5 wt% Pb and 95.5 wt% Sn is 2.6 at% Pb and 97.4 at% Sn. The correct answer is (A).
The atomic weights for Pb and Sn are 207.19 g/mol and 118.71 g/mol, respectively.
To determine the atom percent, we need to follow these steps:
Calculate the moles of Pb and Sn in 100 g of alloy.Moles of Pb: 4.5 g / 207.19 g/mol = 0.0217 mol
Moles of Sn: 95.5 g / 118.71 g/mol = 0.8047 mol
Calculate the total moles of atoms in the alloy.Total moles = 0.0217 mol (Pb) + 0.8047 mol (Sn) = 0.8264 mol
Calculate the atom percent for each element.Atom percent of Pb: (0.0217 mol / 0.8264 mol) * 100 ≈ 2.6 at% Pb
Atom percent of Sn: (0.8047 mol / 0.8264 mol) * 100 ≈ 97.4 at% Sn
Thus, the correct answer is (A) 2.6 at% Pb and 97.4 at% Sn.
In a blast furnace, iron(III) oxide is used to produce iron by the following (unbalanced) reaction: Fe2O3 + CO---------->Fe + CO2 a) If 4.00 kg FeO3 are available to react, how many moles of CO are needed? b) How many moles of each product are formed?
To find the number of moles of CO needed, we use the balanced equation and convert the mass of Fe2O3 to moles. The number of moles of CO needed is 75.12 mol. To find the number of moles of each product formed, we use the same approach and find that 50.08 moles of Fe and 75.12 moles of CO2 are formed.
Explanation:To find the number of moles of CO needed to react with 4.00 kg of Fe2O3, we can use the balanced equation:
Fe2O3 + 3CO --> 2Fe + 3CO2
The molar mass of Fe2O3 is 159.69 g/mol. Converting 4.00 kg to grams gives us 4000 g. Using the molar mass of Fe2O3, we can calculate the number of moles of Fe2O3 as follows:
moles of Fe2O3 = mass of Fe2O3 / molar mass of Fe2O3
moles of Fe2O3 = 4000 g / 159.69 g/mol = 25.04 mol
Since the ratio of Fe2O3 to CO in the balanced equation is 1:3, we can use this ratio to find the number of moles of CO:
moles of CO = moles of Fe2O3 x (3 mol CO / 1 mol Fe2O3)
moles of CO = 25.04 mol x (3 mol CO / 1 mol Fe2O3) = 75.12 mol CO
Therefore, 75.12 moles of CO are needed to react with 4.00 kg of Fe2O3.
To find the number of moles of each product formed, we can use the same approach. Since the balanced equation tells us that the ratio of Fe2O3 to Fe is 1:2, and the ratio of Fe2O3 to CO2 is 1:3, the number of moles of Fe and CO2 will be twice the number of moles of Fe2O3:
moles of Fe = 2 x 25.04 mol = 50.08 mol
moles of CO2 = 3 x 25.04 mol = 75.12 mol
Therefore, 50.08 moles of Fe and 75.12 moles of CO2 are formed.
Learn more about Blast furnace reactions here:https://brainly.com/question/29345048
#SPJ12
(a) If 4.00 kg FeO3 are available to react then 37.43 moles of CO are needed. (b) 49.90 moles of Fe and 37.43 moles of CO₂ are formed.
a) First, we need to convert the mass of Fe₂O₃ to moles. The molar mass of Fe₂O₃ is approximately 159.69 g/mol, so 4.00 kg of Fe₂O₃ is about 24.95 moles.
The balanced chemical equation for the reaction is:
2Fe₂O₃ + 3CO → 4Fe + 3CO₂
From this equation, we can see that 2 moles of Fe₂O₃ react with 3 moles of CO. Therefore, the number of moles of CO needed is:
moles of CO = moles of Fe₂O₃ × (moles of CO / moles of Fe₂O₃) = [tex]24.95 * \frac{3}{2} = 37.43 moles[/tex]
b) From the balanced chemical equation, we can see that 2 moles of Fe₂O₃ produce 4 moles of Fe and 3 moles of CO₂. Therefore, the number of moles of each product formed is:
moles of Fe = moles of Fe₂O₃ × (moles of Fe / moles of Fe₂O₃) = [tex]24.95 * \frac{4}{2} = 49.90 moles[/tex]
moles of CO₂ = moles of Fe₂O₃ × (moles of CO₂ / moles of Fe₂O₃) = [tex]24.95 * \frac{3}{2} = 37.43 moles[/tex]
Therefore, 4.00 kg of Fe₂O₃ can react with 37.43 moles of CO to produce 49.90 moles of Fe and 37.43 moles of CO₂.
The standard cell potential of the following galvanic cell is 1.562 V at 298 K. Zn(s) | Zn2+(aq) || Ag+(aq) | Ag(s) What is the cell potential of the following galvanic cell at 298 K? Zn(s) | Zn2+(aq, 1.00 × 10–3 M) || Ag+(aq, 0.150 M) | Ag(s)
Answer:
E = 1.602v
Explanation:
Use the Nernst Equation => E(non-std) = E⁰(std) – (0.0592/n)logQc …
Zn⁰(s) => Zn⁺²(aq) + 2 eˉ
2Ag⁺(aq) + 2eˉ=> 2Ag⁰(s)
_____________________________
Zn⁰(s) + 2Ag⁺(aq) => Zn⁺²(aq) + 2Ag(s)
Given E⁰ = 1.562v
Qc = [Zn⁺²(aq)]/[Ag⁺]² = (1 x 10ˉ³)/(0.150)² = 0.044
E = E⁰ -(0.0592/n)logQc = 1.562v – (0.0592/2)log(0.044) = 1.602v
Answer:
E = 1.602 V
Explanation:
Let's consider the following galvanic cell.
Zn(s) | Zn²⁺(aq, 1.00 × 10⁻³ M) || Ag⁺(aq, 0.150 M) | Ag(s)
The corresponding half-reactions are:
Zn(s) → Zn²⁺(aq, 1.00 × 10⁻³ M) + 2 e⁻
2 Ag⁺(aq, 0.150 M) + 2 e⁻ → 2 Ag(s)
The overall reaction is:
Zn(s) + 2 Ag⁺(aq, 0.150 M) → Zn²⁺(aq, 1.00 × 10⁻³ M) + 2 Ag(s)
We can find the cell potential (E) using the Nernst equation.
E = E° - (0.05916/n) . log Q
where,
E°: standard cell potential
n: moles of electrons transferred
Q: reaction quotient
E = E° - (0.05916/n) . log [Zn²⁺]/[Ag⁺]²
E = 1.562 V - (0.05916/2) . log (1.00 × 10⁻³)/(0.150)²
E = 1.602 V
Aspirin (acetylsalicylic acid, C9H8O4) is a weak monoprotic acid. To determine its acid-dissociation constant, a student dissolved 2.00 g of aspirin in 0.600 L of water and measured the pH. What was the Ka value calculated by the student if the pH of the solution was 2.60?
Answer:
The value of the dissociation constant will be:[tex]3.94\times 10^{-4}[/tex].
Explanation:
[tex]AsH\rightleftharpoons As^++H^+[/tex]
At ,t= 0 c 0 0
At eq'm (c-x) x x
Concentration of aspirin = c
[tex]c=\frac{2.00 g}{180 g/mol\times 0.600 L}=0.01851 M [/tex]
Expression for dissociation constant will be given as:
[tex]K_a=\frac{[H^+][As^+]}{[AsH]}=\frac{x\times c}{(c-x)}=\frac{x^2}{(c-x)}[/tex]..(1)
The pH of the solution = 2.60
The pH of the solution is due to free hydrogen ions whcih come into solution after partial dissociation of aspirin.
[tex]pH=2.60=\log[H^+]=-\log[x][/tex]
[tex]x=0.002511 M[/tex]
Putting value of x in (1).
[tex]K_a=\frac{x^2}{(c-x)}=\frac{(0.002511 M)^2}{(0.01851 M-0.002511 M)}[/tex]
[tex]K_a=3.94\times 10^{-4}[/tex]
The value of the dissociation constant will be:[tex]3.94\times 10^{-4}[/tex].
for the reaction shown compute the theoretical yield of product in moles each of the initial quantities of reactants. 2 Mn(s)+3 O2 (g) _____ MnO2(s) 2 mol Mn , 2 mol O2
Final answer:
The theoretical yield of MnO2, given 2 moles of Mn and 2 moles of O2, is calculated using stoichiometry and is found to be approximately 1.33 moles based on O2 being the limiting reactant.
Explanation:
To calculate the theoretical yield of MnO₂ from the reaction 2 Mn(s) + 3 O₂ (g) → MnO₂(s), with the initial quantities of 2 mol Mn and 2 mol O₂, we will use stoichiometry. First, we write the balanced chemical equation:
2 Mn(s) + 3 O₂(g) → 2 MnO₂(s)
This equation tells us that 2 moles of Mn react with 3 moles of O₂ to produce 2 moles of MnO₂. Therefore, Mn and O₂ react in a 2:3 mole ratio to produce MnO₂.
The stoichiometry shows the molar ratio of Mn to MnO₂ is 1:1. Since we have 2 moles of Mn, we can produce 2 moles of MnO₂, assuming Mn is the limiting reactant. However, we must also consider O₂. With 2 moles of O₂, the stoichiometry suggests every 3 moles of O₂ produce 2 moles of MnO₂. The limiting reactant is O₂ since it will limit the formation of MnO₂ to 4/3 moles (which is the amount of MnO₂ formed from 2 moles of O₂ based on the 3:2 ratio of O₂ to MnO₂).
Therefore, the theoretical yield of MnO₂ in moles is 4/3 moles or approximately 1.33 moles. This is based on the stoichiometric calculations from the balanced equation taking into account the initial quantities of both reactants and identifying the limiting reactant.
What is the atomic mass of an atom that has 6 protons, 6 neutrons, and 6 electrons? A) 6 B) 8 C) + 1 D) 12 E) 18
Answer: The correct answer is Option D.
Explanation:
Atomic mass of an atom is defined as the sum of number of neutrons and number of protons that are present in an atom. It is represented as 'A'.
Atomic number = Number of protons + Number of neutrons
We are given:
Number of protons = 6
Number of neutrons = 6
Number of electrons = 6
Atomic mass = 6 + 6 = 12
Hence, the correct answer is Option D.
Given the following equation: > 8 CO2 10 H20 2 С4Н10 + 13 02 How many grams of C4H10 are needed to react with 35.1 grams of O2?
Answer: The mass of butane reacting with oxygen gas is 9.76 grams.
Explanation:
To calculate the number of moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] .....(1)
For oxygenGiven mass of oxygen gas = 35.1 g
Molar mass of oxygen gas = 32 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of oxygen gas}=\frac{35.1g}{32g/mol}=1.096mol[/tex]
For the given chemical reaction:
[tex]2C_4H_{10}+13O_2\rightarrow 8CO_2+10H_2O[/tex]
By stoichiometry of the reaction:
13 moles of oxygen gas is reacting with 2 moles of butane.
So, 1.096 moles of oxygen gas will react with = [tex]\frac{2}{13}\times 1.096=0.168moles[/tex] of butane.
Now, calculating the mass of butane from equation 1, we get:
Molar mass of butane = 58.12 g/mol
Moles of butane = 0.168 moles
Putting values in equation 1, we get:
[tex]0.168mol=\frac{\text{Mass of butane}}{58.12g/mol}\\\\\text{Mass of butane}=9.76g[/tex]
Hence, the mass of butane reacting with oxygen gas is 9.76 grams.
Consider the following reaction at a high temperature. Br2(g) ⇆ 2Br(g) When 1.35 moles of Br2 are put in a 0.780−L flask, 3.60 percent of the Br2 undergoes dissociation. Calculate the equilibrium constant Kc for the reaction.
Answer : The equilibrium constant [tex]K_c[/tex] for the reaction is, 0.1133
Explanation :
First we have to calculate the concentration of [tex]Br_2[/tex].
[tex]\text{Concentration of }Br_2=\frac{\text{Moles of }Br_2}{\text{Volume of solution}}[/tex]
[tex]\text{Concentration of }Br_2=\frac{1.35moles}{0.780L}=1.731M[/tex]
Now we have to calculate the dissociated concentration of [tex]Br_2[/tex].
The balanced equilibrium reaction is,
[tex]Br_2(g)\rightleftharpoons 2Br(aq)[/tex]
Initial conc. 1.731 M 0
At eqm. conc. (1.731-x) (2x) M
As we are given,
The percent of dissociation of [tex]Br_2[/tex] = [tex]\alpha[/tex] = 1.2 %
So, the dissociate concentration of [tex]Br_2[/tex] = [tex]C\alpha=1.731M\times \frac{1.2}{100}=0.2077M[/tex]
The value of x = 0.2077 M
Now we have to calculate the concentration of [tex]Br_2\text{ and }Br[/tex] at equilibrium.
Concentration of [tex]Br_2[/tex] = 1.731 - x = 1.731 - 0.2077 = 1.5233 M
Concentration of [tex]Br[/tex] = 2x = 2 × 0.2077 = 0.4154 M
Now we have to calculate the equilibrium constant for the reaction.
The expression of equilibrium constant for the reaction will be :
[tex]K_c=\frac{[Br]^2}{[Br_2]}[/tex]
Now put all the values in this expression, we get :
[tex]K_c=\frac{(0.4154)^2}{1.5233}=0.1133[/tex]
Therefore, the equilibrium constant [tex]K_c[/tex] for the reaction is, 0.1133
The equilibrium constant (Kc) for the dissociation reaction of Br₂ into 2Br at high temperature, given an initial amount of 1.35 moles in a 0.780 L flask and 3.60% dissociation, is calculated to be approximately 0.0093.
You've been tasked with calculating the equilibrium constant (Kc) for the dissociation of bromine into bromine atoms at high temperature using the given data: An initial amount of 1.35 moles of Br₂ in a 0.780 L flask with 3.60 percent dissociation.
Determine the initial concentration of Br₂ by dividing moles by volume: CBr₂(initial) = moles / volume.
Calculate the amount dissociated by multiplying the initial concentration by the percentage dissociated.
Determine concentrations at equilibrium using the stoichiometry of the reaction.
Use the formula Kc = [Br]² / [Br₂] to find the equilibrium constant.
Let's calculate it:
CBr₂(initial) = 1.35 moles / 0.780 L = 1.731 moles/L.
Amount dissociated = 1.731 moles/L x 3.60% = 0.06232 moles/L.
At equilibrium, [Br₂] = 1.731 - 0.06232 = 1.6687 moles/L, and [Br] = 2 x 0.06232 moles/L = 0.12464 moles/L.
The equilibrium constant Kc = (0.12464)^2 / 1.6687 = 0.00930628672.
The equilibrium constant Kc for the given reaction is approximately 0.0093.
Be sure to answer all parts.Classify each nitrogen-containing functional group in the anesthetic lidocaine according to whether it is an amide, or a primary, secondary, or tertiary amine.h542140Functional group 1 is a(n) .Functional group 2 is a(n)
Answer:
The 1st functional group is secondary amine and the 2nd fun. group is tertiary amine.
Explanation:
Lidocaine does not contain amide functional group in its composition as nitrogen is associated only with carbon.
In lidocaine, Functional group 1 is a secondary amine because it has two hydrocarbon groups attached to the nitrogen atom, and Functional group 2 is an amide due to the presence of a carbonyl group bonded to the nitrogen atom.
To classify the nitrogen-containing functional groups in lidocaine, it is important to understand the structure of amines and amides. Amines are classified as primary, secondary, or tertiary by the number of hydrocarbon groups attached to the nitrogen atom, with a primary amine having one alkyl or aryl group, a secondary amine having two, and a tertiary amine having three. An amide is a functional group with a carbonyl group (C=O) bonded to a nitrogen atom. In the structure of lidocaine, Functional group 1 is a secondary amine because it has two carbon atoms directly bonded to the nitrogen atom. Functional group 2 is an amide, identifiable by its carbonyl group bonded to the nitrogen atom.