Answer:
Acid from abandoned mines- D.
Answer:
Water from a sewage treatment plant
Explanation:
Water from a sewage treatment plant is an example of point-source pollution.
If a substance is ionic, then it likely will what ?
Answer
be a crystalline solid
be soluble in water
conduct electricity
Explanation:
If a substance is ionic, then it will have these characteristics:
be a crystalline solidbe soluble in waterconduct electricityWhat are ionic compounds?Ionic compounds are those compounds that are made by gain or losing electrons between of metal and non-metals. They are joined by ionic bonds, and ionic bonds are formed when there is electrostatic attraction between substances.
Ionic compounds dissociate into separated charged ions when they dissolve into a liquid. Example of ionic compounds are table salt, silver iodide, etc.
They contain a negative and a positive charge and are crystalline solid compounds. So, the overall compounds are neutral. They can conduct electricity.
Thus, If a substance is ionic, then it will likely have a metal and a nonmetal.
To learn more about ionic compounds, refer to the link:
https://brainly.com/question/9167977
#SPJ6
What is the difference between a strong acid and a weak acid?
There is no difference between a strong acid and a weak acid because they are both acids.
A strong acid will react with a base. A weak acid will not.
A strong acid will produce a larger amount of ions than a weak acid.
A strong acid will produce a smaller amount of ions than a weak acid.
Answer:
The answer is: A strong acid will produce a greater amount of ions than a weak acid.
Explanation:
The key difference between weak and strong acid is that weak acids partially ionize in water while strong acids completely ionize.
The answer is: A strong acid will produce a greater amount of ions than a weak acid.
The main difference between a strong and a weak acid is the extent of their ionization in water. Strong acids fully dissociate into ions, making them strong electrolytes, while weak acids only partially dissociate and are therefore weak electrolytes.
Explanation:The difference between a strong acid and a weak acid lies in their ability to dissociate in water. A strong acid, like hydrochloric acid (HCl), dissociates completely in water, meaning it ionizes 100% into H+ (hydrogen ions) and its corresponding anion (e.g., Cl- for HCl), making it a strong electrolyte. On the other hand, a weak acid, such as acetic acid found in vinegar, only partially dissociates in water, resulting in a mixture of undissociated molecules and ions. Therefore, weak acids are considered weak electrolytes because they produce fewer ions in solution.
This distinction is crucial because it affects how the acid reacts in an acid-base reaction. While both strong and weak acids can react with bases, a strong acid will produce a larger amount of ions than a weak acid, which has a significant impact on the equilibrium and strength of the acid in solution.
Is steel ionic, covalent or metallic
Answer:
Steel is bonded together by a metallic bond.
Explanation:
There is attractions in the bond, Steel has negative electrons and positive ions, which attract each other. They hold the structure together thus forming a metallic bond.
An object weighing 89.7g is placed in graduated cylinder displacing the volume from 50.0mL to 60.5 mL
Answer:The density of an object is 8.54 g/mL
Explanation:
Titration reveals that 11.6 mL of 3.0M sulfuric acid are required to neutralize the sodium hydroxide in 25.00mL of NaOH solution. What is the molarity of the NaOH solution?
Answer:
Explanation:
Molarity of acid(volume of acid)(# of H ions)= molarity of base(volume of base)(# of OH ions)
M(v)(#)=M(v)(#)
sulfuric acid sodium hydroxide
H2SO4 NaOH
(3)(11.6)(2)=M(25)(1)
M=2.784
The molarity of the NaOH solution is 2.784 M
We'll begin by writing the balanced equation for the reaction.
2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂OFrom the balanced equation above,
The mole ratio of the acid, H₂SO₄ ([tex]n_{a}[/tex]) = 1
The mole ratio of the base, NaOH ([tex]n_{b}[/tex]) = 2
From the question given above, the following data were obtained:
Volume of acid, H₂SO₄ ([tex]V_{a}[/tex]) = 11.6 mL
Molarity of acid, H₂SO₄ ([tex]M_{a}[/tex]) = 3 M
Volume of base, NaOH ([tex]V_{b}[/tex]) = 25 mL
Molarity of base, ([tex]M_{b}[/tex]) =?[tex]\frac{M_{a} V_{a}}{M_{b} V_{b}} = \frac{n_{a}}{n_{a}}\\\\ \frac{3 (11.6)}{M_{b} (25)} = \frac{1}{2}\\\\[/tex]
Cross multiply[tex]M_{b}[/tex] × 25 × 1 = 3 × 11.6 × 2
[tex]M_{b}[/tex] × 25 = 69.6
Divide both side by 25[tex]M_{b} = \frac{69.6}{25}\\ M_{b} = 2.784 M[/tex]
Therefore, the molarity of the NaOH solution is 2.784 M
Learn more: https://brainly.com/question/14475043
How do you calculate percentage yield? What is the definition of percentage yield?
Answer:
It's the percent ratio of actual yield to the theoretical yield.
Explanation:
Theoretical yield is the calculated yield using the balanced chemical reaction. Actual yield is what is actually obtained in a chemical reaction. Percent yield is a comparison of the actual yield with the theoretical yield.
Explanation:To compute the percent yield, it is first necessary to determine the theoretical yield, which is the maximum amount of product that could be formed from the given amounts of reactants. The theoretical yield is calculated based on the stoichiometry of the chemical equation. The actual yield, on the other hand, is what is actually obtained in a chemical reaction when it is carried out in the laboratory. The percent yield is then determined by calculating the ratio of the actual yield to the theoretical yield, multiplied by 100 to give a percentage.
The SI unit for energy is the Joule (J). Sam wants to convert 338.25 J into kJ.
Which operation should he choose?
He should multiply 338.25 by 10.
He should multiply 338.25 by 100.
He should divide 338.25 by 100.
He should divide 338.25 by 1000.
Answer:
The answer id D. on EDGEN.
Explanation:
D. He should divide 338.25 by 1000.
He should divide 338.25 by 1000. Hence, option D is correct.
What is energy?Energy is the capacity for doing work. It may exist in potential, kinetic, thermal, electrical, chemical, nuclear, or other forms.
To convert a joule measurement to a kilojoule measurement, divide the energy by the conversion ratio.
The energy in kilojoules is equal to the joules divided by 1,000.
[tex]\frac{338.25 J}{1000}[/tex]
= . 33825 kJ
Hence, .33825 kJ is the energy when we convert 338.25 J to kJ.
Learn more about the energy here:
https://brainly.com/question/1932868
#SPJ2
Choose all that apply. When creating a graph, you should:
determine the x- and y- variables
label the scale on the x- and y- axes
plot the data points
draw a line of best fit to represent the data trend
Answer:All of them
Explanation:
Answer: The correct answer is all of them!
Explanation:
Looked at my lesson after seeing mixed answers and the correct answer is all of them!
How does the radius of a nitrogen ion with a −3 charge compare to that of neutral nitrogen?
Answer:
The radius of a nitride ion is much larger than that of a nitrogen atom.
Explanation:
You are adding three extra electrons to the same energy shell.
This greatly increases electron repulsions.
The volume increases to give the electrons more room and decrease the repulsions.
The radius increases by a factor of 2.3 and the volume increases by a factor of 12.
The radius of the atom has been increased with the acquisition of the-3 charge.
The radius of an atom has been defined as the distance of the nucleus to the outermost electron. The loss and addition of electrons to the atom has results in the charge along with the change in radius.
Radius of Nitrogen ionThe negative charge to the atom has been imposed with the gain of electrons. Thus, the nitrogen ion has been formed with the gain of 3 electrons.
The increase in the number of electrons results in the increased repulsion to the outermost electron from the nucleus. Thus, the radius of the atom has been increased with the acquisition of the-3 charge.
Learn more about radius of ion, here:
https://brainly.com/question/19664845
If temperature is held constant for an ideal gas, as P and V change for a given gas sample, the PV of products will_____. increase decrease be constant change
Answer:
The PV of products will be constant.
Explanation:
Ideal gas equation- PV = nRT
where P is pressure of gas, V is volume of gas, n is number of moles of gas, R is gas constant and T is temperature (in Kelvin) of gas.
Now, number of moles of a gas remain constant with change in state variables.
So, if T is constant then the term "nRT" remins constant.
As PV is equal to nRT therefore PV will be constant if temperature is held constant.
In another way we can say if P is increased then V will decrease or vice versa.
Answer:
Be Constant
Explanation:
there are 6.022 x 10^23 atoms of Hg in 1 mole of Hg. The number of atoms in 4.5 moles of Hg can be found by multiplying 4.5 by 6.022 x 10^23
A. 2.7 x 10^24
B. 27 x 10^23
C. 2.71 x10^24
D. 27.099 x 10^23
Answer:
D. 27.099 x 10²³.
Explanation:
It is known that every 1.0 mole of an atom contains Avogadro's no. (6.022 x 10²³) atoms.So, 4.5 mol of Hg will contain:
(4.5 mol)(6.022 x 10²³) = 27.099 x 10²³ atoms.
So, the right choice is: D. 27.099 x 10²³.
Answer: [tex]27\times 10^{23}[/tex]
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
1 mole of [tex]Hg[/tex] contains = [tex]6.023\times 10^{23}[/tex] atoms of mercury
Thus 4.5 moles of [tex]Hg[/tex] contains = [tex]\frac{6.023\times 10^{23}}{1}\times 4.5=27.099\times 10^{23}[/tex] atoms of mercury
Thus the number of atoms in 4.5 moles of mercury are [tex]27\times 10^{23}[/tex] atoms of mercury.
Which statements best describe gases? Check all that apply.
The atoms in a gas move at high speeds.
The atoms in a gas often get stuck
together.
The atoms in a gas spread in all directions.
Gases have a definite shape.
Gases have a definite volume.
The atoms in a gas move at high speeds.
The atoms in a gas spread in all directions.
What are gases?
A gas is a sample of matter that conforms to the shape of a container in which it is held and acquires a uniform density inside the container, even in the presence of gravity and regardless of the amount of substance in the container.
Gas is one of the three main states of matter.
Gas is made up of atoms, tiny particles that makeup molecules, and molecules that move faster and further away as compared to other states of matter, which enables gas to fill a container evenly.
Hence, the atoms in a gas move at high speeds and the atoms in a gas spread in all directions.
Learn more about gases here:
https://brainly.com/question/1369730
#SPJ2
Final answer:
Gases consist of atoms that move at high speeds and spread in all directions, filling the volume of their container. They have no definite shape or volume and can be easily compressed or expand.
Explanation:
When considering the properties of gases, it's important to recognize several key characteristics that describe their behavior:
The atoms in a gas move at high speeds, traveling in straight lines and only changing direction when they collide with something, such as other gas atoms or the walls of their container.The atoms in a gas spread in all directions because they are in continuous motion and there are no significant forces keeping them together.Gases do not have a definite shape or a definite volume, they expand to fill the container they are in and can easily be compressed or expand based on external factors.Therefore, the statements that best describe gases are:
The atoms in a gas move at high speeds.The atoms in a gas spread in all directions.Gases have no definite shape.Gases have no definite volume.An atom has 9 electrons and 9 protons at the start. If it loses 2 electrons, the net charge on the atom will be . If the atom instead gains 4 electrons, the net charge will be .
Answer:
I think its higher
Explanation:
When an atom with 9 protons loses 2 electrons, it becomes a cation with a +2 charge. If it instead gains 4 electrons, it becomes an anion with a -4 charge.
Initially, an atom with 9 electrons and 9 protons is electrically neutral because the negative charges of the electrons perfectly counterbalance the positive charges of the protons. When an atom loses electrons, it becomes more positively charged or forms a cation.
Specifically, if it loses 2 electrons, it will have 7 electrons and 9 protons, resulting in a net charge of +2 as the calculation is 9 protons - 7 electrons = +2. This is represented as 2+.
Conversely, when an atom gains electrons, it becomes more negatively charged or forms an anion. If the atom gains 4 electrons to have 13 electrons and 9 protons, the net charge would be -4, since the calculation here is 9 protons - 13 electrons = -4. This is represented as 4-.
Therefore, the net charge will be -4.
How can a mixture of salt water be separated into salt and water
A mixture of saltwater can be separated into salt and water through a process called "evaporation." Evaporation exploits the differences in boiling points between water and salt, allowing the components to be separated.
Here's how you can do it:
Start with the mixture of saltwater in a container. The salt is dissolved in the water.
Apply heat to the container. You can do this by placing the container on a stovetop or using an open flame. As the temperature rises, the water will begin to evaporate.
The water will change from its liquid state into water vapor (a gas) due to the heat. This water vapor will rise and leave the container, leaving behind the solid salt particles.
Continue heating until all the water has evaporated. The salt will be left behind in the container.
Once the evaporation process is complete, allow the container to cool. The salt will remain in its solid form, ready for use.
It's crucial to remember that this technique works best when separating dissolved salt from water. A alternative technique, such as filtering, would be needed if you want to separate salt from water in a solution where the salt has not yet dissolved (such as sand and seawater). The evaporation technique is straightforward, however it might not be effective for large-scale separation processes. In these circumstances, more sophisticated methods like distillation may be used.
To know more about evaporation:
https://brainly.com/question/27162326
#SPJ2
Final answer:
Salt and water can be separated through distillation, which uses their different boiling points, or through evaporation, which utilizes the sun's heat to leave behind salt crystals as water evaporates.
Explanation:
Separation of Salt and Water
To separate a mixture of salt and water, you can use physical methods such as distillation. Distillation exploits the difference in boiling points between the two substances. In this process, the saltwater is heated until the water boils and turns into vapor. The water vapor then condenses in a cooler part of the apparatus, often a condenser, and can be collected as pure water in a receiving flask. The salt, not having a vapor phase at the boiling point of water, remains in the original container.
Another method that can be used to separate salt from water, especially on a large scale, is evaporation. Large shallow ponds, often referred to as salt gardens, are used to expose saltwater to the heat of the sun. As the water evaporates, salt crystals are left behind, which can then be collected and further purified if necessary. These methods are practical, but the choice of method depends on the desired purity and the quantity of water and salt to be separated.
Which of the following statements is true in all cases?
A. Chemical bonds are broken in an exothermic reaction.
B. Chemical bonds are formed in an endothermic reaction
C. Energy is released in an endothermic reaction.
D. Energy is absorbed in an endothermic reaction.
Answer:
D. Energy is absorbed in an endothermic reaction
Explanation:
In all cases, an endothermic reaction is one in which is absorbed from the surroundings for the reaction to take place. After the reaction, the surrounding becomes colder as heat is drawn from it to furnish the reaction.
It is in an exothermic reaction that heat is liberated to the surroundings and this makes the surrounding hotter at the end of the reaction.
In some reactions, when bonds are broken, they can release energy and they can also absorb energy.
Answer:
D
Explanation:
Energy is absorbed in the form of heat
Edge2021
Sugar is dissolved in water. Which is the solute? sugar neither both water
Answer:
Sugar
Explanation:
Defintion of a solute-dissolved in the solvent, sugar dissolves in water and is therefore the solute
That would be solute.
A solute is the one that gets dissolved in the solvent. Here the solute is sugar and the solvent is water.
. Which conversion factor should you use first to calculate the number of grams of CO2 produced by the reaction of 50.6 g of CH4 with O2? The complete combustion of methane is described by this equation: CH4(g) + 2O2(g) → CO2(g) + 2H2O(l) 44.0 g CO2 / 2 mol CO2 16.0 g CH4 / 1 mol CO4 1 mol CH4 / 16.0 g CH4 2 mol O2 / 1 mol CO2
To calculate the number of grams of CO2 produced by the reaction of 50.6 g of CH4 with O2, we need to use the correct conversion factors. The first conversion factor to use is 1 mol CH4 / 16.0 g CH4, followed by 1 mol CO2 / 1 mol CH4, and finally 44.0 g CO2 / 1 mol CO2.
Explanation:In order to calculate the number of grams of CO2 produced by the reaction of 50.6 g of CH4 with O2, we need to use the appropriate conversion factor. Based on the balanced chemical equation, we can see that the ratio between CH4 and CO2 is 1:1. Therefore, the correct conversion factor to use first is:
1 mol CH4 / 16.0 g CH4
This conversion factor allows us to convert the given mass of CH4 to moles of CH4.
Next, we can use the mole ratio from the balanced chemical equation to convert moles of CH4 to moles of CO2:
1 mol CO2 / 1 mol CH4
Finally, we can use the molar mass of CO2 to convert moles of CO2 to grams of CO2:
44.0 g CO2 / 1 mol CO2
Learn more about conversion factors here:https://brainly.com/question/28366871
#SPJ3
Is the following chemical equation balanced?
AgNO3 + NaCl 4AgCl + NaNO3
yes
no
Select the correct answer.
Which question is testable?
A.
How does changing the amount of water affect the growth of corn?
B.
Is it ethical to use human tissue removed during surgery for scientific research?
C.
Are you happy with your new job?
D.
Will people be disappointed if car insurance rates increase?
Answer:
A. How does changing the amount of water affect the growth of corn?
Explanation:
To test this question, all you have to do is buy corn, and keep them all in the same area with the same amount of sunlight, temperature, etc, and only change the amount of water each plant gets.
~
Answer:
A. How does changing the amount of water affect the growth of corn?
Explanation:
To test this question, all you have to do is buy corn, and keep them all in the same area with the same amount of sunlight, temperature, etc, and only change the amount of water each plant gets.
1. What is Boyle’s law?
• State the definition of the law in words.
• What are the assumptions of Boyle’s law?
• Write at least one mathematical equation that represents the law.
• What can be calculated with Boyle’s law?
• Using a gas-filled balloon as an example, describe what is happening to the gas molecules inside the balloon before and after you squeeze it.
Answer: Boyle's Law states if the temperature of gas remains the same, adding pressure will decrease the volume of the gas.
Explanation: The assumptions of Boyle's law basically states that if the temperature is constant, pressurizing the gas will cause a decrease in the overall volume of the gas.
The law can be represented with the following equation:
P1 x V1 = P2 x V2
Boyle's law can calculate the volume of a gas after it undergoes a pressure change. For example, if the volume of a gas is equal to 2.2 liters at a pressure of 1.3 atm, what happens to the volume of the gas if the pressure is decreased to 0.75 atm? You can determine that after plugging in the values into the equation.
1.3 atm x 2.2 L = 0.75 x V2
Next, multiply 1.3 atm by 2.2 L. Then, divide both sides of the equation by 0.75 to get 3.81, which can be rounded to 3.8. The answer is 3.8 L = V2.
So, this shows that when the pressure is decreased, the volume increases. The relationship between pressure and volume is inversely proportional, and the opposite would happen if the pressure was increased.
If you had a balloon, the gas molecules inside would be constantly in motion, and all spaced out. However, if the balloon was put under pressure, the molecules would become more closely packed together as the space decreased inside. So, according to Boyle's Law, the volume inside the balloon would decrease due to the pressure increasing if the temperature is constant.
Definition:
According to Boyle's law, the pressure of an ideal gas increases with a decrease in the volume of the container at a constant temperature.
Pressure is inversely proportional to volume.
Assumptions of Boyle's law:The assumptions made in the law are that the temperature and number of moles of gases or amount of gas within a closed system are constant.
Mathematical representation:PV = k
P is the pressure of the gas
V is the volume of the gas in the container
k is constant
What can be calculated with Boyle's law?We can calculate pressure and volume using Boyle's law.
The balloon is inflated with air, and as the air pressure presses on the rubber, the balloon expands. The balloon's unsqueezed portion will expand outward if one end is squeezed, reducing the volume and increasing pressure inside.
Learn more about Boyle's law here:
https://brainly.com/question/1437490
#SPJ2
Which is the most likely reason why an aerosol can explodes when it is thrown into a fire?
Heated air particles flow from the atmosphere into the can.
The metal in the can expands due to the heat of the fire.
The particles in the can move more slowly until they join together.
Heat causes the gas particles in the can to move faster and farther apart.
Hello There!
Your Answer is that “heat causes the gas particles in the can to move faster and farther apart.”
An aerosol is a tiny liquid or solid particle that is suspended in the atmosphere.
Which is an example of a free expansion of a gas?
the expansion of a gas due to a chemical reaction among its particles
the uncontrolled expansion of a gas into a vacuum
the expansion of a gas as it performs work on its container
the expansion of a gas as heat is transfered to it at constant pressure
The uncontrolled expansion of a gas into a vacuum is an example of a free expansion of a gas. Therefore, the correct option is option D.
What is free expansion?These really are adiabatic processes where no heat is transferred between both the system and its surrounding environment and therefore no work is performed on or by the system. These adiabatic processes are known as free expansion. A gas expands inside an enclosed evacuated chamber in an irreversible process.
It is also known as Joule expansion. The temperature of an ideal gas does not fluctuate (see Joule's Second Law), whereas actual gases suffer temperature changes during free expansion. Q = W = 0 in free expansion. The uncontrolled expansion of a gas into a vacuum is an example of a free expansion of a gas.
Therefore, the correct option is option D.
To learn more about free expansion, here:
https://brainly.com/question/16827107
#SPJ6
Final answer:
A free expansion of a gas occurs when it expands into a vacuum, such as when gas confined in a flask fills up an adjoining vacuum flask upon opening a valve between them, increasing the entropy of the system without performing any work on its surroundings.
Explanation:
An example of a free expansion of a gas is the uncontrolled expansion of a gas into a vacuum. This process, also referenced as a macroscopic example of a particle-in-a-box model, involves a gas initially confined to one of two flasks. When a valve between the flasks is opened, the gas expands to fill the available volume in both flasks. This spontaneous expansion leads to an increase in the entropy of the system. Unlike scenarios where a gas expands as it heats up or performs work by pushing against the containers' walls, the unique characteristic of a free expansion is that it occurs without the gas performing any work on its surroundings and without a change in energy due to heat transfer.
what type of electromagnetic waves does the human eye see as the colors red blue or green
A Visible light waves
B Radio waves
C infrared waves
D microwaves
Answer:
A. Visible light waves.
Answer: A Visible light waves
Explanation:
Electromagnetic wave is defined as the wave which is associated with both electrical and magnetic component associated with them. They can travel in vacuum as well and travel with the speed of light.
The Electromagnetic spectrum involves gamma rays , X rays, ultra violet rays, visible rays, infrared rays, micro waves and radio waves which are arranged in order of increasing wavelength and decreasing frequency.
Visible region consists of violet, indigo, blue, green, yellow, orange and red light and they have wavelengths which are visible to naked eyes.
How are elements in the nitrogen family (Group 15) similar to each other?
A. They are metalloids.
B. They are not very reactive.
C. They are shiny.
D. They react in similar ways.
Option D, They react in similar ways.
The Nitrogen family consists of five elements, which start with nitrogen on the periodic table and move down the group or column:
NitrogenPhosphorusArsenicAntimonyWhat are the family characteristics?Bismuth Nitrogen family elements consists of atoms having 5 electrons in their outer energy level. Two of the electrons are in the s subshell, with 3 unpaired electrons in the p subshell.
As you move down the nitrogen family: atomic radius increases, ionic radius increases, ionization energy decreases, and electronegativity decreases.
Nitrogen family elements often form covalent compounds, usually with the oxidation numbers +3 or +5.
Nitrogen and phosphorus are nonmetals. Arsenic and antimony are metalloids. Bismuth is a metal.
To learn more Nitrogen family, refer
https://brainly.com/question/12886051
#SPJ2
Should we only write condensed formula in chemical equations (for lessons like carbon and compounds). What did your teachers say? Plz make it fast as my exam is tomorrow!
Answer:
Here's what I get.
Explanation:
If your teachers don't ask for a specific type of formula, a condensed structural formula should be OK. If they ask specifically for a structural formula or a bond-line formula, that is what you must give.Bottom line: ask your teachers in advance what they expect.
what are ions an isotopes
An ion is an atom with a net electric charge due to the loss or gain of one or more electrons.
An isotopeis each of two or more forms of the same element that contain equal numbers of protons but different numbers of neutrons in their nuclei, and hence differ in relative atomic mass but not in chemical properties.
Answer:
A ion is an atom of the same element with different numbers of electrons.
A isotopes is an atom of the same element with different numbers of neutrons.
How can evidence from an experiment be explained in her relationship to the hypothesis?
A.as a prediction
B.as a question
C.as an in Inference
D.as a conclusion
Answer:
evidence from an experiment be explained in her relationship to the hypothesis as an inference
24g of magnesium reacts with 38 g of fluoride o produce __ g magnesium fluoride
Answer: 62g
Explanation: You add 24g and 38 grams because when a substance reacts with another substance there is the same amount of grams in the product, so there would be 62 grams in the product because that is the amount of grams there is in the reactants.
In a chemical reaction, 24g of magnesium reacts with 38g of fluoride to yield 62g of magnesium fluoride according to stoichiometry principles.
Explanation:The question refers to a stoichiometry problem in chemistry related to the reaction of magnesium and fluoride to produce magnesium fluoride. Stoichiometry is the calculation of relative quantities of reactants and products in chemical reactions. Using the balanced equation for the reaction of magnesium and fluoride:
Mg + F2 → MgF2
In this reaction, one mole of magnesium reacts with one mole of fluorine to produce one mole of magnesium fluoride. Given the atomic masses (Mg = 24 g/mol, F =19 g/mol, MgF2 = 62 g/mol), this reaction signifies that 24g of Magnesium will react with 38g of Fluoride to produce 62g of Magnesium Fluoride. Therefore, the question's accurate answer is: 24g of magnesium reacts with 38g of fluoride to produce 62g of magnesium fluoride.
Learn more about Stoichiometry here:https://brainly.com/question/30215297
#SPJ2
Which statement is a reason to support population regulation?
A) It is unethical for us to control birth control rates
B) Humans have the freedom to produce as many children as desired
C) The gap between the rich and poor has been narrowing since 1960
D) Billions more people on the Earth will intensify many environmental and social problems
Answer:
D
Explanation:
D states a problem because of the population growing. Regulate means control and d stated that their was a problem and a need to control it. Therefore, d I'd really the only valid answer.
Final answer:
The need for population regulation is supported by the fact that a growing population intensifies environmental and social issues. Strategies like education and economic security can lead to lower birth rates, which is crucial for sustainable development and manageable population growth.
Explanation:
The statement supporting the need for population regulation is D) Billions more people on the Earth will intensify many environmental and social problems. This is because the carrying capacity of the Earth has been exceeded, leading to environmental degradation and resource depletion. Global efforts to curb population growth, such as China's one-child policy, have been both controversial and variably effective. Nonetheless, as the human population continues to increase, the pressures on food production, water resources, and global stability escalate, with the United Nations projecting potential population numbers ranging from 6 to 16 billion by 2100.
Population control is not just about reducing numbers; it's also about ensuring sustainable development and equitable resource distribution, which are vital for economic stability and avoiding social strife. Education, particularly for women, and the provision of economic security are recognized strategies that naturally lead to lower birth rates, thereby assisting in the management of population growth without the need for coercive policies.
Reduction is a reaction which results in a __1____ in electrons and a __2____ in positive charge of the atom or ion
1) a- loss
1) b- gain
2) a-increase
2) b-decrease
Hello! Your answer would be a gain of electrons and a decrease in positive charge.
Contrary to how it sounds, reduction is actually a gain of electrons. It is part of a set of reactions known as a redox reaction, reduction being a gain of electrons and oxidation being a loss.
With the gain of electrons, the element would become more negative as electrons bring with them a negative charge. Therefore, this would decrease the positive charge.
Hope this helped!
Answer:
I believe that the answers are:
1) loss
2) increase