Doctors practice antiseptic medicine to D) prevent introducing infection-causing microbes to the patient. Managing bacterial infections requires careful use of antibiotics to avoid killing beneficial bacteria and prevent antibiotic resistance.
The reason why doctors practice antiseptic medicine is to avoid introducing microbes that could infect the patient. This is an essential part of infection control in medical settings. While antibiotics are valuable in treating bacterial infections by killing the bacteria causing the illness, they also impact the good bacteria that protect the body from infection. When deciding on using antimicrobial drugs, doctors must consider the type of bacterial infection and the potential resistance of bacteria to available antibiotics.
Antibiotic resistance is a significant concern in medicine, as it can lead to infections that are harder to treat, requiring longer and more expensive hospital stays. It emerges from the bacteria's adaptation through natural selection, effectively making certain drugs less effective over time.
A team of astronauts is on a mission to land on and explore a large asteroid. In addition to collecting samples and performing experiments, one of their tasks is to demonstrate the concept of the escape speed by throwing rocks straight up at various initial speeds. With what minimum initial speed ????esc will the rocks need to be thrown in order for them never to "fall" back to the asteroid? Assume that the asteroid is approximately spherical, with an average density ????=2.02×106 g/m3 and volume ????=3.09×1012 m3 . Recall that the universal gravitational constant is ????=6.67×10−11 N·m2/kg2 .
Answer:
9.60 m/s
Explanation:
The escape speed of an object from the surface of a planet/asteroid is given by:
[tex]v=\sqrt{\frac{2GM}{R}}[/tex]
where
G is the gravitational constant
M is the mass of the planet/asteroid
R is the radius of the planet/asteroid
In this problem we have
[tex]\rho = 2.02\cdot 10^6 g/m^3[/tex] is the density of the asteroid
[tex]V=3.09\cdot 10^{12}m^3[/tex] is the volume
So the mass of the asteroid is
[tex]M=\rho V=(2.02\cdot 10^6 g/m^3)(3.09\cdot 10^{12} m^3)=6.24\cdot 10^{18} g=6.24\cdot 10^{15} kg[/tex]
The asteroid is approximately spherical, so its volume can be written as
[tex]V=\frac{4}{3}\pi R^3[/tex]
where R is the radius. Solving for R,
[tex]R=\sqrt[3]{\frac{3V}{4\pi}}=\sqrt[3]{\frac{3(3.09\cdot 10^{12} m^3)}{4\pi}}=9036 m[/tex]
Substituting M and R inside the formula of the escape speed, we find:
[tex]v=\sqrt{\frac{2(6.67\cdot 10^{-11})(6.24\cdot 10^{15})}{(9036)}}=9.60 m/s[/tex]
A train moving at a constant speed is passing a stationary observer on a platform. On one of the train cars, a flute player is continually playing the note known as concert A (f = 440 Hz). After the flute has passed, the observer hears the sound with a frequency of 415 Hz. What is the speed of the train? The speed of sound in air is 343 m/s. A) 7.3 m/s B) 12 m/s C) 21 m/s D) 37 m/s E) 42 m/s
Answer:
C) 21 m/s
Explanation:
The general formula of the Doppler effect is:
[tex]f'=(\frac{v+v_r}{v+v_s})f[/tex]
where
f' is the apparent frequency
f is the original frequency
v is the speed of the wave in the medium
[tex]v_r[/tex] is the velocity of the receiver, positive if the receiver is moving towards the source
[tex]v_s[/tex] is the velocity of the source, positive if the source is moving away from the receiver
Here we have
f = 440 Hz
f' = 415 Hz
v = 343 m/s
[tex]v_r = 0[/tex] (the observer is stationary)
[tex]v_s[/tex] is positive since we are considering when the train has passed the observer, so it is moving away from him
So we can rewrite the formula as
[tex]f'=(\frac{v}{v+v_s})f[/tex]
And solving for [tex]v_s[/tex], we find the speed of the train
[tex]v_s = v(\frac{f}{f'}-1)=(343 m/s)(\frac{440 Hz}{415 Hz}-1)=20.7 m/s \sim 21 m/s[/tex]
By applying Doppler's effect of a wave, the speed of this train is equal to 21 m/s.
Given the following data:
Maximum frequency = 440 Hz.
Apparent frequency = 415 Hz.
Speed of sound in air = 343 m/s.
Observer speed = 0 m/s (since his stationary).
What is Doppler effect?Doppler effect can be defined as the change in frequency of a wave with respect to an observer that is in motion and moving relative to the source of the wave.
How to calculate the speed of the train.Mathematically, Doppler's effect of a wave is given by this formula:
[tex]F_o = \frac{V+V_r}{V+V_s}F[/tex]
Substituting the given parameters into the formula, we have;
[tex]415 = \frac{343+0}{343+V_s} \times 440\\\\142345+415V_s=150920\\\\415V_s=150920-142345\\\\415V_s=8575\\\\V_s=\frac{8575}{415} \\\\V_s=20.66[/tex]
Speed = 20.66 ≈ 21 m/s.
Read more on Doppler's effect here: brainly.com/question/3841958
The triceps muscle in the back of the upper arm extends the forearm. This muscle in a professional boxer exerts a force of 2.00 X 10^3 N with an effective perpendicular lever arm of 3.10 cm, producing an angular acceleration of the forearm of 125 rad/s2. What is the moment of inertia of the boxer's forearm? kg · m2
Answer:
[tex]0.496 kg m^2[/tex]
Explanation:
The torque exerted is given by
[tex]\tau = Fd[/tex]
where
[tex]F=2.00 \cdot 10^3 N[/tex] is the force applied
d = 3.10 cm = 0.031 m is the length of the lever arm
Substituting,
[tex]\tau=(2.00\cdot 10^3 N)(0.031 m)=62 Nm[/tex]
The equivalent of Newton's second law for rotational motion is:
[tex]\tau = I \alpha[/tex]
where
[tex]\tau = 62 Nm[/tex] is the net torque
I is the moment of inertia
[tex]\alpha = 125 rad/s^2[/tex] is the angular acceleration
Solving the equation for I, we find
[tex]I=\frac{\tau}{\alpha}=\frac{62 Nm}{125 rad/s^2}=0.496 kg m^2[/tex]
A vector points into the third quadrant, and its x and y components are both negative. If its magnitude is equal to two times the magnitude of its x component, what is the angle between the vector and the positive x axis?
The angle between the vector and the positive x axis is approximately 60°.
Explanation:The vector points into the third quadrant, which means its x and y components are both negative. Let's assume that the magnitude of the vector is represented by |A| and the magnitude of the x component is represented by |Ax|. The given condition states that |A| = 2 * |Ax|. Using this information, we can find the angle between the vector and the positive x axis.
First, we need to find the values of |A| and |Ax|. Since |A| = 2 * |Ax|, we can substitute this into the Pythagorean theorem:
|A|² = |Ax|² + |Ay|²
Now let's substitute the given information into the equation:
(2 * |Ax|)² = |Ax|² + (|Ay|)²
Expanding and simplifying the equation:
4 * |Ax|² = |Ax|² + (|Ay|)²
3 * |Ax|² = (|Ay|)²
Now, we can take the square root of both sides:
√(3 * |Ax|²) = √((|Ay|)²)
√3 * |Ax| = |Ay|
Since both |Ax| and |Ay| are negative, we can ignore the negative sign. Therefore, |Ax| = -1 and |Ay| = -√3.
Now, we have all the information we need to find the angle between the vector and the positive x axis. We can use the formula: tan(A) = |Ay|/|Ax| = (-√3)/(-1) = √3
The angle A is the inverse tangent of √3: A = atan(√3) ≈ 60°
So, the angle between the vector and the positive x axis is approximately 60°.
A) How many joules of energy does a 100-watt light bulb use per hour? Express your answer using two significant figures.
B) How fast would a 65 kg person have to run to have that amount of energy? Express your answer using two significant figures.
A) [tex]3.6\cdot 10^5 J[/tex]
The power used by an object is defined as
[tex]P=\frac{E}{t}[/tex]
where
E is the energy used
t is the time elapsed
In this problem, we have
P = 100 W is the power of the light bulb
t = 1 h = 3600 s is the time elapsed
Solving for E, we find the amount of energy used by the light bulb:
[tex]E=Pt = (100 W)(3600 s)=3.6\cdot 10^5 J[/tex]
B) [tex]1.1 \cdot 10^2 m/s[/tex]
The kinetic energy of an object is given by
[tex]K=\frac{1}{2}mv^2[/tex]
where
m is the mass
v is the speed of the object
In this problem, we have a man of mass
m = 65 kg
we want its kinetic energy to be
[tex]E=3.6\cdot 10^5 J[/tex]
Therefore, we can calculate its speed from the previous formula:
[tex]v=\sqrt{\frac{2K}{m}}=\sqrt{\frac{2(3.6\cdot 10^5 J)}{65 kg}}=105.2 m/s = 1.1 \cdot 10^2 m/s[/tex]
A 100-watt light bulb uses 360,000 joules of energy per hour. A 65 kg person would need to run at approximately 105 m/s to have the same amount of kinetic energy.
Energy = Power × Time = 100 W × 3600 s = 360000 J
Therefore, a 100-watt light bulb uses 360,000 joules of energy per hour.
KE = ½ mv²
Where m is mass in kilograms and v is velocity in meters per second. Plugging in the values, we can solve for v:
360,000 J = ½ × 65 kg × v²
v² = (2 × 360,000 J) / 65 kg = 11076.92 m²/s²
v = √11076.92 m²/s²
v ≈ 105 m/s
Hence, a 65 kg person would need to run at approximately 105 meters per second to have 360,000 joules of kinetic energy, which is equivalent to the energy used by a 100-watt light bulb in one hour.
The effective area of each plate of a parallel plate capacitor is 2.1 m2. The capacitor is filled with neoprene rubber (κ = 6.4). When a 6.0-V potential difference exists across the plates of the capacitor, the capacitor stores 4.0 µC of charge. Determine the plate separation of the capacitor.
Answer:
[tex]1.78\cdot 10^{-4} m[/tex]
Explanation:
The capacitance of the capacitor is given by:
[tex]C=\frac{Q}{V}[/tex]
where
[tex]Q=4.0\mu C=4.0\cdot 10^{-6} C[/tex] is the charge stored on the plates
V = 6.0 V is the potential difference across the capacitor
Substituting, we find
[tex]C=\frac{4.0\cdot 10^{-6} C}{6.0 V}=6.7\cdot 10^{-7} F[/tex]
The capacitance of a parallel-plate capacitor is also given by
[tex]C=k\frac{\epsilon_0 A}{d}[/tex]
where
k = 6.4 is the dielectric constant
[tex]\epsilon_0[/tex] is the vacuum permittivity
[tex]A=2.1 m^2[/tex] is the area of each plate
d is the separation between the plates
Solving for d, we find
[tex]d=\frac{k\epsilon_0 A}{C}=\frac{(6.4)(8.85\cdot 10^{-12} F/m)(2.1 m^2)}{6.7\cdot 10^{-7}F}=1.78\cdot 10^{-4} m[/tex]
During your summer internship for an aerospace company, you are asked to design a small research rocket. The rocket is to be launched from rest from the earth's surface and is to reach a maximum height of 940 m above the earth's surface. The rocket's engines give the rocket an upward acceleration of 16.0 m/s2 during the time T that they fire. After the engines shut off, the rocket is in free fall. Ignore air resistance.What must be the value of T in order for the rocket to reach the required altitude?
10.8 seconds is the correct answ
You charge a parallel-plate capacitor, remove it from the battery, and prevent the wires connected to the plates from touching each other. When you pull the plates apart to a larger separation, do the following quantities increase, decrease, or stay the same? C decrease Correct: Your answer is correct. Q decrease Incorrect: Your answer is incorrect. E between the plates stay the same Correct: Your answer is correct. ΔV increase Correct: Your answer is correct.
Answer:
Q: remains the same
C: decreases
ΔV: increases
Explanation:
When the capacitor is disconnected from the battery, and the wire connected to the plates are not touching anything else, it means that the charge cannot flow out from the capacitor: so, the charge stored on the plates of the capacitor, Q, will not change, regardless of the distance between the plates.
The capacitance of a parallel plate is given by
[tex]C=\frac{\epsilon_0 A}{d}[/tex]
where A is the area of the plates and d the separation between the plates. As we see from the formula, C is inversely proportional to d: so, if the plates are pulled apart to a larger separation, it means that d increases, and so C decreases.
Finally, the voltage across the capacitor is given by
[tex]\Delta V=\frac{Q}{C}[/tex]
and since we said that Q does not change while C decreases, it means that [tex]\Delta V[/tex] increases, since [tex]\Delta V[/tex] is inversely proportional to C.
(a) Find the energy of the ground state (n = 1) and the first two excited states of an electron in a one-dimensional box of length L = 1.0 10-15 m = 1.00 fm (about the diameter of an atomic nucleus). ground state MeV first excited state MeV second excited state GeV Make an energy-level diagram for the system. (Do this on paper. Your instructor may ask you to turn in this work.) (b) Calculate the wavelength of electromagnetic radiation emitted when the electron makes a transition from n = 2 to n = 1. fm (c) Calculate the wavelength of electromagnetic radiation emitted when the electron makes a transition from n = 3 to n = 2. fm (d) Calculate the wavelength of electromagnetic radiation emitted when the electron makes a transition from n = 3 to n = 1. fm
(a) [tex]3.77\cdot 10^5 MeV, 1.51\cdot 10^6 MeV, 3.39\cdot 10^3 GeV[/tex]
The energy levels of an electron in a box are given by
[tex]E_n = \frac{n^2 h^2}{8mL^2}[/tex]
where
n is the energy level
[tex]h=6.63\cdot 10^{-34}Js[/tex] is the Planck constant
[tex]m=9.11\cdot 10^{-31}kg[/tex] is the mass of the electron
[tex]L=1.0\cdot 10^{-15} m[/tex] is the size of the box
Substituting n=1, we find the energy of the ground state:
[tex]E_1 = \frac{1^2 (6.63\cdot 10^{-34}^2}{8(9.11\cdot 10^{-31}(1.0\cdot 10^{-15})^2}=6.03\cdot 10^{-8}J[/tex]
Converting into MeV,
[tex]E_1 = \frac{6.03\cdot 10^{-8} J}{1.6\cdot 10^{-19} J/eV}\cdot 10^{-6} MeV/eV =3.77\cdot 10^5 MeV[/tex]
Substituting n=2, we find the energy of the first excited state:
[tex]E_2 = \frac{2^2 (6.63\cdot 10^{-34}^2}{8(9.11\cdot 10^{-31}(1.0\cdot 10^{-15})^2}=2.41\cdot 10^{-7}J[/tex]
Converting into MeV,
[tex]E_2 = \frac{2.41\cdot 10^{-7} J}{1.6\cdot 10^{-19} J/eV}\cdot 10^{-6} MeV/eV =1.51\cdot 10^6 MeV[/tex]
Substituting n=3, we find the energy of the second excited state:
[tex]E_3 = \frac{3^2 (6.63\cdot 10^{-34}^2}{8(9.11\cdot 10^{-31}(1.0\cdot 10^{-15})^2}=5.43\cdot 10^{-7}J[/tex]
Converting into GeV,
[tex]E_3 = \frac{5.43\cdot 10^{-7} J}{1.6\cdot 10^{-19} J/eV}\cdot 10^{-9} GeV/eV =3.39\cdot 10^3 GeV[/tex]
(b) [tex]1.10 \cdot 10^{-18} m[/tex]
The energy of the emitted radiation is equal to the energy difference between the two levels, so:
[tex]E=E_2 - E_1 = 2.41\cdot 10^{-7}J - 6.03\cdot 10^{-8} J=1.81\cdot 10^{-7} J[/tex]
And the energy of the electromagnetic radiation is
[tex]E=\frac{hc}{\lambda}[/tex]
where c is the speed of light; so, re-arranging the formula, we find the wavelength:
[tex]\lambda=\frac{hc}{E}=\frac{(6.63\cdot 10^{-34} Js)(3\cdot 10^8 m/s)}{1.81\cdot 10^{-7}J}=1.10 \cdot 10^{-18} m[/tex]
(c) [tex]6.59 \cdot 10^{-19} m[/tex]
The energy of the emitted radiation is equal to the energy difference between the two levels, so:
[tex]E=E_3 - E_2 = 5.43\cdot 10^{-7} J - 2.41\cdot 10^{-7}J =3.02\cdot 10^{-7} J[/tex]
Using the same formula as before, we find the corresponding wavelength:
[tex]\lambda=\frac{hc}{E}=\frac{(6.63\cdot 10^{-34} Js)(3\cdot 10^8 m/s)}{3.02\cdot 10^{-7}J}=6.59 \cdot 10^{-19} m[/tex]
(d) [tex]4.12 \cdot 10^{-19} m[/tex]
The energy of the emitted radiation is equal to the energy difference between the two levels, so:
[tex]E=E_3 - E_1 = 5.43\cdot 10^{-7} J - 6.03\cdot 10^{-8}J =4.83\cdot 10^{-7} J[/tex]
Using the same formula as before, we find:
[tex]\lambda=\frac{hc}{E}=\frac{(6.63\cdot 10^{-34} Js)(3\cdot 10^8 m/s)}{4.83\cdot 10^{-7}J}=4.12 \cdot 10^{-19} m[/tex]
What was Galileo’s contribution to the study of motion?
Hello! :)
A study of motion is basically like physics.
Hence, using the telescope, Galileo discovered the mountains on the moon, the spots on the sun, and four moons of Jupiter. His discoveries provided the evidence to support the theory that the earth and other planets revolved around the sun.
Hope this helped and I hope I answered in time!
Good luck!
~ Destiny ^_^
The plane of a loop of wire is perpendicular to a magnetic field. Rank, from greatest to least, the magnitudes of the loop's induced emf for each situation. A. The magnetic field strength increases from 0 T to 1 T in 6 s. B. The magnetic field strength increases from 1 T to 4 T in 2 s. C. The magnetic field strength remains at 4 T for 1 min. D. The magnetic field strength decreases from 4 T to 3 T in 4 s. E. The magnetic field strength decreases from 3 T to 0 T in 1 s.
Answer:
E - B - D - A - C
Explanation:
The magnitude of the emf induced in the loop of wire is given by Faraday-Newmann-Lenz
[tex]\epsilon=\frac{\Delta \Phi_B}{\Delta t}[/tex] (1)
where
[tex]\Delta \Phi_B[/tex] is the variation of magnetic flux
[tex]\Delta t[/tex] is the time interval
Rewriting the flux as product between magnetic field strength (B) and area enclosed by the coil (A):
[tex]\Phi_B = BA[/tex]
and since the area of the coil does not change, the variation of flux can be rewritten as
[tex]\Delta \Phi_B = \Delta B A[/tex]
So (1) becomes
[tex]\epsilon=\frac{\Delta B}{\Delta t}A[/tex]
Which means that the induced emf is proportional to the rate of change of the magnetic field, [tex]\frac{\Delta B}{\Delta t}[/tex]. So we just need to calculate this quantity for each scenario, and rank them from greatest to latest.
We have:
A) [tex]\frac{\Delta B}{\Delta t}=\frac{1 T - 0T}{6 s}=0.167 T/s[/tex]
B) [tex]\frac{\Delta B}{\Delta t}=\frac{4 T - 1T}{2 s}=1.500 T/s[/tex]
C) [tex]\frac{\Delta B}{\Delta t}=\frac{4 T - 4T}{60 s}=0 T/s[/tex]
D) [tex]\frac{\Delta B}{\Delta t}=\frac{3 T - 4T}{4 s}=-0.250 T/s[/tex]
E) [tex]\frac{\Delta B}{\Delta t}=\frac{0 T - 3T}{1 s}=-3.000 T/s[/tex]
So, from greatest to least magnitude, we have:
E - B - D - A - C
The plane of a loop of wire is perpendicular to a magnetic field. Rank, from greatest to least, the magnitudes of the loop's induced emf for each situation will be E - B - D - A-C.
What is magnetic field strength?The number of magnetic flux lines on a unit area passing perpendicular to the given line direction is known as induced magnetic field strength .it is denoted by B.
The magnitude of the induced emf in the loop of wire is;
[tex]\rm \epsilon = \frac{\triangle \phi }{ \triangle t} \\\\[/tex]
The megnetic flux is given by;
[tex]\phi_B= \triangle BA[/tex]
[tex]\rm \epsilon = \frac{ \triangle BA }{ \triangle t} \\\\[/tex]
The above expression shows that the induced emf is proportional to the rate of change of the magnetic field,
[tex]\rm \frac{ \triangle B }{ \triangle t} = \frac{ 1T-0T }{ 6} =0.167\ T/sec[/tex]
[tex]\rm \frac{ \triangle B }{ \triangle t} = \frac{ 4T-1T }{ 2} =1.500\ T/sec[/tex]
[tex]\rm \frac{ \triangle B }{ \triangle t} = \frac{ 4T-4T }{ 60} =0\ T/sec[/tex]
[tex]\rm \frac{ \triangle B }{ \triangle t} = \frac{ 3T-4T }{ 4} =-0.25 \ T/sec[/tex]
[tex]\rm \frac{ \triangle B }{ \triangle t} = \frac{ 0T-3T }{ 1} =-3 \ T/sec[/tex]
From the above, it is observed that Rank, from greatest to least, the magnitudes of the loop's induced emf for each situation will be E - B - D - A-C.
Hence the order will be E - B - D - A-C.
To learn more about the strength of induced magnetic field refer to;
https://brainly.com/question/2248956
An aquarium 4 m long, 1 m wide, and 1 m deep is full of water. Find the work needed to pump half of the water out of the aquarium. (Use 9.8 m/s2 for g and the fact that the density of water is 1000 kg/m3.)
Explanation:
Let's begin by explaining that the Work [tex]W[/tex] done by a Force [tex]F[/tex] refers to the release of potential energy from a body that is moved by the application of that force to overcome a resistance along a distance [tex]y[/tex]. When the applied force is constant and the direction of the force and the direction of the movement are parallel, the equation to calculate it is:
[tex]W=F.y[/tex] (1)
In the case of this rectangular aquarium (see figure attached), we know its initial volume [tex]V_{i}[/tex] (which is the same volume occupied by water, because the tank is full) is:
[tex]V_{i}=4m.1m.1m=4m^{3}[/tex] (2)
In addition, we know the force needed to pump a small amount of water is:
[tex]F=m_{water}.g[/tex] (3)
On the other hand, we know the density of the water [tex]\rho_{water}[/tex] is given by the following equation:
[tex]\rho_{water}=\frac{m_{water}}{V}[/tex] (4)
Where [tex]m_{water}[/tex] is the mass of water and [tex]V=4m.1m.dy[/tex] is the volume of a thin "sheet" of water.
Finding [tex]m_{water}[/tex]:
[tex]m_{water}=\rho_{water}.V[/tex] (5)
Substituting (5) in (3):
[tex]F=\rho_{water}.V.g[/tex] (6)
And substituting (6) in (1):
[tex]W=\rho_{water}.V.g.y[/tex] (7)
Now, we are asked to find the work needed to pump half of the water out of the aquarium. So, if the aquarium is [tex]1m[/tex] deep, the half is [tex]0.5m[/tex]:
[tex]W=(1000\frac{kg}{m^{3}})(4m.1m.dy)(9.8\frac{m}{s^{2}})y[/tex] (8)
[tex]W=39200\frac{kg.m^{6}}{s^{2}}ydy[/tex] (9)
Well, in order to solve this, we have to write the definite integral from y=0 mto y=0.5m:
[tex]W=39200\frac{kg.m^{6}}{s^{2}}\int\limits^{0.5}_0 {y} \, dy[/tex] (10)
Knowing [tex]\int\limits^b_a {f(y)} \, dy= F(b)-F(a)[/tex]:
[tex]W=39200\frac{kg.m^{6}}{s^{2}}(\frac{(0.5m)^{2}}{2}-\frac{(0m)^{2}}{2})[/tex] (11)
[tex]W=4900kg\frac{m^{2}}{s^{2}}[/tex] (12)
[tex]W=4900J[/tex] >>>>This is the work needed to pump half of the water out of the aquarium
Work is the product of force and displacement. The amount of work needed to pump half of the water out of the aquarium is 4900 J.
What is work done?Work done can be defined as the amount of force needed to displace an object from one location to another.
[tex]W = F \cdot ds[/tex]
Given to us
Volume of the aquarium, V = 4 x 1 x s = 4m³
Height of the aquarium, s = 1 m
Acceleration due to gravity, g = 9.8 m/s²
Density of water, ρ = 1000 kg/m³
We know about work done, it is given as,
[tex]W = F \cdot ds[/tex]
We also know that force can be written as,
[tex]F = m \cdot a[/tex]
Also, the mass can be written as,
[tex]m = \rho \times V[/tex]
Therefore, work can be written as,
[tex]W = F\cdot ds\\\\W = m \cdot a \cdot ds\\\\W = (\rho \times V \times a )ds\\\\W = \int (\rho \times V \times a )ds[/tex]
As we need to pump half of the water, therefore, from below the tank to half the distance
[tex]W = \int_0^{\frac{1}{2}} (\rho \times V \times a )ds\\\\W = \int_0^{\frac{1}{2}} (\rho \times (4 \times 1 \times s) \times a )ds\\\\W = (\rho \times 4 \times a )[s^2]_0^{\frac{1}{2}\\\\[/tex]
Substitute all the values,
[tex]W = 1000\times 4 \times g \times[(\dfrac{0.5}{2}^2) -0^2]\\\\W = 1000\times 4 \times 9.8 \times 0.125\\\\W = 4900\ J[/tex]
Hence, the amount of work needed to pump half of the water out of the aquarium is 4900 J.
Learn more about Work:
https://brainly.com/question/81684
When numbers are very small or very large, it is convenient to either express the value in scientific notation and/or by using a prefix with the unit. A pain-relieving pill has a mass of 0.005 g. Express the pill’s mass in grams using scientific notation or in milligrams. Express your answer in scientific notation to one significant figure or use a prefix on the unit.
Answer:
5 mg, [tex]5\cdot 10^{-3}g[/tex]
Explanation:
First of all, let's rewrite the mass in grams using scientific notation.
we have:
m = 0.005 g
To rewrite it in scientific notation, we must count by how many digits we have to move the dot on the right - in this case three. So in scientific notation is
[tex]m=5\cdot 10^{-3}g[/tex]
If we want to convert into milligrams, we must remind that
1 g = 1000 mg
So we can use the proportion
[tex]1 g : 1000 mg = 0.005 g : x[/tex]
and we find
[tex]x=\frac{(1000 mg)(0.005 g)}{1 g}=5 mg[/tex]
To express the mass of the pill in grams, you can write it in scientific notation as 5.0 x 10^-3 g or in milligrams as 5 mg.
Explanation:To express the mass of the pain-relieving pill in grams, we can either use scientific notation or a metric prefix. The mass of the pill is given as 0.005 g. To express it in scientific notation, we write it as 5.0 x 10-3 g. This means the mass is 5.0 times 10 raised to the power of -3 grams. Alternatively, we can express the mass in milligrams. Since 1 gram is equal to 1000 milligrams, the mass of the pill can be written as 5 mg.
wo parallel plates of area 100cm2are given charges of equal magnitudes 8.9 ×10−7C but opposite signs. The electric field within the dielectric material filling the space between the plates is 1.4 ×106V/m. (a) Calculate the dielectric constant of the material. (b) Determine the magnitude of the charge induced on each dielectric surface.
(a) 7.18
The electric field within a parallel plate capacitor with dielectric is given by:
[tex]E=\frac{\sigma}{k \epsilon_0}[/tex] (1)
where
[tex]\sigma[/tex] is the surface charge density
k is the dielectric constant
[tex]\epsilon_0[/tex] is the vacuum permittivity
The area of the plates in this capacitor is
[tex]A=100 cm^2 = 100\cdot 10^{-4} m^2[/tex]
while the charge is
[tex]Q=8.9\cdot 10^{-7}C[/tex]
So the surface charge density is
[tex]\sigma = \frac{Q}{A}=\frac{8.9\cdot 10^{-7} C}{100\cdot 10^{-4} m^2}=8.9\cdot 10^{-5} C/m^2[/tex]
The electric field is
[tex]E=1.4\cdot 10^6 V/m[/tex]
So we can re-arrange eq.(1) to find k:
[tex]k=\frac{\sigma}{E \epsilon_0}=\frac{8.9\cdot 10^{-5} C/m^2}{(1.4\cdot 10^6 V/m)(8.85\cdot 10^{-12} F/m)}=7.18[/tex]
(b) [tex]7.66\cdot 10^{-7}C[/tex]
The surface charge density induced on each dielectric surface is given by
[tex]\sigma' = \sigma (1-\frac{1}{k})[/tex]
where
[tex]\sigma=8.9\cdot 10^{-5} C/m^2[/tex] is the initial charge density
k = 7.18 is the dielectric constant
Substituting,
[tex]\sigma' = (8.9\cdot 10^{-5} C/m^2) (1-\frac{1}{7.18})=7.66\cdot 10^{5} C/m^2[/tex]
And by multiplying by the area, we find the charge induced on each surface:
[tex]Q' = \sigma' A = (7.66\cdot 10^{-5} C/m^2)(100 \cdot 10^{-4}m^2)=7.66\cdot 10^{-7}C[/tex]
Final answer:
The dielectric constant cannot be determined without the electric field value without the dielectric (E0). The induced charge on each dielectric surface can be calculated once the electric field (E) is given, using the permittivity of free space and the area of the plates.
Explanation:
To solve the student's question regarding the dielectric constant and the induced charge on a dielectric material, we need to apply concepts from electrodynamics and the properties of capacitors.
Dielectric Constant (k)
The dielectric constant (k) is given by the ratio of the electric field without the dielectric (E0) to the electric field with the dielectric (E). Here, you provided us with the electric field within the dielectric material (E) which is 1.4 × 106 V/m, but have not given us the electric field without the dielectric (E0). To find k, we would normally use the following equation:
k = E0 / E
Without knowing E0, we cannot calculate the dielectric constant directly.
Induced Charge (Qi)
We can calculate the induced charge on each surface of the dielectric (Qi) using the relation between electric field (E), surface charge density (σ), and the permittivity of free space (ε0).
E = σ / ε0
From that, the induced surface charge density is:
σi = E × ε0
Where the permittivity of free space (ε0) is approximately 8.85 × 10-12 F/m. After calculating σi, we can find Qi by multiplying σi with the plate area (A), which you've given as 100 cm2 or 0.01 m2.
Use the graph to determine the object’s average velocity.
What is the average velocity of the object?
Answer: 0.1 m/s
Explanation:
m=1
s=10
1/10=0.1
The average velocity of the object is 0.1 m/s
From the question,
We are to determine the object's average velocity
Average velocity is defined as the change in position or displacement (∆x) divided by the time intervals (∆t)
That is,
[tex]Average\ velocity = \frac{x_{f}-x_{0} }{t_{f}-t_{0} }[/tex]
Where [tex]x_{f}[/tex] is the final position
[tex]x_{0}[/tex] is the initial position
[tex]t_{f}[/tex] is the final time
and [tex]t_{0}[/tex] is the initial time
From the question,
[tex]x_{f} = 5 \ m[/tex]
[tex]x_{0} = 0\ m[/tex]
[tex]t_{f} = 50 \ s[/tex]
[tex]t_{0} = 0 \ s[/tex]
Putting the parameters into the formula, we get
[tex]Average\ velocity = \frac{5-0}{50-0}[/tex]
[tex]Average\ velocity = \frac{5}{50}[/tex]
[tex]Average\ velocity = 0.1 \ m/s[/tex]
Hence, the average velocity of the object is 0.1 m/s
Learn more here: https://brainly.com/question/13447399
Because of increasing evidence of damage to the ozone layer, chlorofluorocarbon (CFC) production was banned in 1996. However, there are about 100 million auto air conditioners that still use CFC−12 (CF2Cl2). These air conditioners are recharged from stockpiled supplies of CFC−12. If each of the 100 million automobiles contains 1.2 kg of CFC−12 and leaks 20 % of its CFC−12 into the atmosphere per year, how much chlorine, in kg, is added to the atmosphere each year due to auto air conditioners? (Assume two significant figures in your calculations.)
Each automobile adds 0.24 kg of chlorine to the atmosphere each year due to CFC-12 leakage. The total amount of chlorine added each year is 24,000,000 kg.
Explanation:To calculate the amount of chlorine added to the atmosphere each year due to auto air conditioners, we need to consider the amount of CFC-12 leaked by each automobile.
Given that each automobile contains 1.2 kg of CFC-12 and leaks 20% per year, we can calculate the amount of chlorine added per automobile per year:
Chlorine added per automobile per year = 1.2 kg of CFC-12 x 20% = 0.24 kg.
Since there are 100 million automobiles, the total amount of chlorine added to the atmosphere each year due to auto air conditioners is:
Total chlorine added per year = Chlorine added per automobile per year * Number of automobiles = 0.24 kg * 100,000,000 = 24,000,000 kg.
Learn more about Chlorine added to the atmosphere due to CFC-12 leakage in auto air conditioners here:https://brainly.com/question/28655552
#SPJ12
in an eslastic ,the momentum is_______and the mechanical energy is
Answer:
In an elastic collision, the momentum is conserved and the mechanical energy is conserved too.
Explanation:
There are two types of collisions:
- Elastic collision: in an elastic collision, the total momentum before and after the collision is conserved; also, the total mechanical energy before and after the collision is conserved.
- Inelastic collision: in an inelastic collision, the total momentum before and after the colllision is conserved, while the total mechanical energy is not conserved (in fact, part of the energy is converted into other forms of energy such that thermal energy, due to the presence of frictional forces)
Two workers are sliding 470 kg crate across the floor. One worker pushes forward on the crate with a force of 450 N while the other pulls in the same direction with a force of 330 N using a rope connected to the crate. Both forces are horizontal, and the crate slides with a constant speed. What is the crate's coefficient of kinetic friction on the floor?
Answer:
0.169
Explanation:
There are three forces acting on the crate along the horizontal direction:
- The pushing force of the first worker, F1 = 450 N forward
- The pushing force of the second worker, F2 = 330 N forward
- The frictional force [tex]F_f[/tex] acting backward
The crate slides with constant speed, so its acceleration is zero: a = 0. This means that we can write Newton's second law as
[tex]\sum F = ma = 0\\F_1 + F_2 - F_f = 0[/tex]
The frictional force can be rewritten as
[tex]F_f = \mu mg[/tex]
where
[tex]\mu[/tex] is the coefficient of kinetic friction
m = 470 kg is the mass of the crate
g = 9.8 m/s^2 is the acceleration due to gravity
Substituting everything into the previous equation, we find:
[tex]F_1 + F_2 - \mu mg = 0\\\mu = \frac{F_1 + F_2}{mg}=\frac{450 N+330 N}{(470 kg)(9.8 m/s^2)}=0.169[/tex]
The coefficient of kinetic friction for the crate on this particular floor surface, given that the total force propelling the crate by the workers is balanced by the frictional force, is approximately 0.169.
Explanation:In this problem, two workers are sliding a 470 kg crate across the floor. One pushes with a force of 450 N, and the other pulls with a force of 330 N, with both forces applied horizontally. Given that the crate slides at a constant speed, we can infer that the total force propelling the crate (450 N + 330 N) is balanced by the frictional force.
Since the crate moves at a constant pace, the force of friction equals the total force exerted by the workers, 780 N (450 N + 330 N). The frictional force is generally given as Ff = μkN, where μk is the coefficient of kinetic friction, and N is the normal force. For a crate on a horizontal surface, the normal force equals the weight of the crate, which is mass (m) times gravity (g), or 470 kg * 9.8 m/s², or approximately 4606 N.
So we can set up the equation as follows: 780 N = μk * 4606 N. Solving for μk gives us μk = 780 N / 4606 N = 0.169. Therefore, the coefficient of kinetic friction for the crate on this particular floor surface is approximately 0.169.
Learn more about Coefficient of kinetic friction here:https://brainly.com/question/30394536
#SPJ11
can someone help me?!!!!!
Answer:
Third Option
[tex]B = -0.5A[/tex]
Explanation:
If we have a vector A = ax + by we know that by definition
cA = cax + cby
Where c is a constant.
In this case we have two vectors
[tex]A = 7.6\^x -9.2\^y\\\\B = -3.8\^x + 4.6\^y[/tex]
You may notice that vector B has an opposite direction to vector A.
You may also notice that | Ax | is the double of | Bx | and | Ay | is double of |By |
That is to say
[tex]3.8 +3.8 = 7.6\\\\4.6 +4.6 = 9.2[/tex]
So the equation that relates to vectors A and B is:
[tex]B = -0.5A[/tex].
You can verify this relationship by performing the operation
[tex]B = -0.5A[/tex]
[tex]-3.8\^x + 4.6\^y = -0.5(7.6\^x -9.2\^y)\\\\\-3.8\^x + 4.6\^y = -3.8\^x + 4.6\^y[/tex]
The answer is:
The third option,
[tex]B=-0.5A[/tex]
Why?To solve the problem, we need to remember the following vector property:
Vector multiplied by a scalar or constant number:
Multiplying a vector by a scalar number results in multiplying each of the components of the vector (x, y and z) by the scalar or constant number (including its sign).
So, we are given the following vectors:
[tex]A=(7.6,-9,2)\\B=(-3.8,4.6)[/tex]
So, writing an equation that involves both given vectors, we have:
[tex]B=-0.5A\\\\(-3.8,4.6)=-0.5((7.6,-9,2))=((-0.5*7.6),(-0.5*-9.2)\\\\(-3.8,4.6)=(-3.8,4.6)[/tex]
Hence, we have that the answer is the third option,
[tex]B=0.5A[/tex]
Have a nice day!
A plant box falls from the windowsill 25.0 m above the sidewalk and hits the cement 3.0 s later. What is the box's velocity when it hits the ground?
24 m/s
22 m/s
120 m/s
Answer:
22m/s
Explanation:
To find the velocity we employ the equation of free fall: v²=u²+2gh
where u is initial velocity, g is acceleration due to gravity h is the height, v is the velocity the moment it hits the ground, taking the direction towards gravity as positive.
Substituting for the values in the question we get:
v²=2×9.8m/s²×25m
v²=490m²/s²
v=22.14m/s which can be approximated to 22m/s
A electric field propagating in air is incident onto an perfectly conducting interface has the following phasor field In terms of the amplitude Eo and the wavevector components: 1. find a phasor expression for the reflected magnetic field 2. find a phasor expression for the total magnetic field in air item find a phasor expression for the total electric field in air. 3. find a phasor expression for the current induced on the surface of the conductor. 4. find a space-time expression for the current induced on the surface of the the conductor. ind a phasor expression for the induced electric charge on the conductor 6. find a space-time expression for the induced electric charge in the conductor.
I believe it should be
A 69 kg driver gets into an empty taptap to start the day's work. The springs compress 2×10−2 m . What is the effective spring constant of the spring system in the taptap? Enter the spring constant numerically in newtons per meter using two significant figures.
Answer:
[tex]3.4\cdot 10^4 N/m[/tex]
Explanation:
The spring system in the taptap obey's Hooke's law, which states that:
[tex]F=kx[/tex]
where
F is the magnitude of the force applied
k is the spring constant
x is the compression/stretching of the spring
In this problem:
- The force applied is the weight of the driver of mass m = 69 kg, so
[tex]F=mg=(69 kg)(9.8 m/s^2)=676.2 N[/tex]
- The compression of the spring is
[tex]x=2\cdot 10^{-2} m=0.02 m[/tex]
So, the spring constant is
[tex]k=\frac{F}{x}=\frac{676.2 N}{0.02 m}=3.4\cdot 10^4 N/m[/tex]
The spring constant of the spring compressed 2x10⁻² m by a 69 kg driver is 3.4x10⁴ N/m.
We can use the Hooke's law equation to find the spring constant:
[tex] F = -kx [/tex] (1)
Where:
F: is the Hooke's force
k: is the spring constant =?
x: is the distance of compression of the spring = -2x10⁻² m. The negative sign is because it is compressing (negative direction).
The force of equation (1) is equal to the weight force (W) of the driver, so:
[tex] W = F [/tex]
[tex] mg = -kx [/tex] (2)
Where:
m: is the mass of the driver = 69 kg
g: is the acceleration due to gravity = 9.81 m/s²
Solving equation (2) for k, we have:
[tex] k = -\frac{mg}{x} = -\frac{69 kg*9.81 m/s^{2}}{-2\cdot 10^{-2} m} = 3.4 \cdot 10^{4} N/m [/tex]
Therefore, the spring constant is 3.4x10⁴ N/m.
You can learn more about Hooke's law here:
https://brainly.com/question/4757133?referrer=searchResultshttps://brainly.com/question/2835064?referrer=searchResultsI hope it helps you!
Atom A consists of 10 protons, 12 neutrons, and 10 electrons. Atom B consists of 10 protons, 10 neutrons, and 12 electrons. (5 points) The atoms are isotopes of each other. The atoms are not isotopes of each other.
Answer:
The atoms are isotopes of each other
Explanation:
- Two atoms are said to be isotopes of each other if they have same atomic number Z (which corresponds to the number of protons) but different mass number A (which corresponds to the sum of protons and neutrons in the nucleus).
For atom A, we have:
Z = 10 (10 protons)
A = 10+12 = 22 (10 protons + 12 neutrons)
For atom B, we have:
Z = 10 (10 protons)
A = 10+10 = 20 (10 protons + 10 neutrons)
The two atoms have same atomic number Z but different mass number A, so they are isotopes of each other.
Atom A and Atom B are isotopes of the same element because they have an equal number of protons (10 each), but differ in the number of neutrons (12 in Atom A and 10 in Atom B).
Explanation:The atoms identified as A and B are isotopes of each other. Isotopes are variations of a chemical element, which means they have the same number of protons (and thus belong to the same element) but differ in the number of neutrons. In this case, both atoms A and B share the same number of protons (10) which identifies the element, but differ in the number of neutrons (12 in atom A and 10 in atom B).
Learn more about Isotopes here:https://brainly.com/question/11680817
#SPJ3
Does a swimmer underwater observe the same color or a different color for this light?
1. A swimmer underwater observes a different color because the wavelength changes.
2. It is not possible to know what a swimmer underwater will observe.
3. A swimmer underwater observes a the same color because the wavelength does not change.
4. A swimmer underwater observes the same color because the frequency does not change.
5. A swimmer underwater observes a different color because the frequency changes.
Explanation:
When a swimmer is underwater and a light pasess from air to water, there is a change in the medium and its index of refraction, hence the light is refracted. This means it changes its direction.
Nevertheless, in this process the refracted ray of light does not change its frequency [tex]f[/tex], because frequency is:
[tex]f=\frac{1}{T}[/tex]
Where [tex]T[/tex] is the period of the wave and this remains unchanged, hence the frequency, as well.
So, as the frequency does not change and the color of light depends on frequency, the color of the light remains the same.
Which statement is true regarding DC current? A. The electrons move back and forth. B. There can only be one voltage supplied. C. A high voltage current can be transformed into a low voltage current. D. A low voltage current can be transformed into a high voltage current. E. This is what is sent from the power plants to your home.
Answer:
B
Explanation:
In a DC current, the current supplied is steady motion (a straight horizontal line in a graph) and this is what makes it had to transform. The alternating current takes a sine wave motion in a graph. This means is voltage varies from zero to peak and reverses polarity. The rate at which it achieves this is its frequency in Hertz.
Final answer:
DC current is a unidirectional flow of electric charge, unlike AC current which periodically reverses direction. The true statement about DC current is that there can only be one voltage supplied in a DC circuit (option B).
Explanation:
The question concerns the characteristics of DC current. Direct current, or DC, is the flow of electric charge in only one direction, which is characteristic of systems with a constant voltage source, such as a battery. Unlike alternating current, or AC, which periodically reverses direction, DC's flow is unidirectional. The given statements regarding DC current must be assessed for their correctness. To clarify:
A. The electrons in DC current do not move back and forth; they move in a single, constant direction.B. In a DC circuit, there can indeed be only one voltage supplied at any point in time.C. DC current cannot be easily transformed from high voltage to low voltage like AC can using transformers.D. Conversely, DC current cannot be transformed from low voltage to high voltage as easily as AC.E. Electrical power transmitted from power plants to homes is typically AC, not DC.Given this information, we can conclude that the true statement regarding DC current is B. There can only be one voltage supplied in a DC circuit.
It is known that birds can detect the earth's magnetic field, but the mechanism of how they do this is not known. It has been suggested that perhaps they detect a motional EMF as they fly north to south, but it turns out that the induced voltages are small compared to the voltages normally encountered in cells, so this is probably not the mechanism involved. To check this out, calculate the induced voltage for a wild goose with a wingspan of 1.2 m flying due south at 13 m/s at a point where the earth's magnetic field is 5 x 10-5 T directed downward from horizontal by 40-degrees. The expected voltage would be about:A) .50 mV B) .25 mV C) .60 mV D) .060 mV E) .78 mV
Answer:
A) 0.50 mV
Explanation:
In this problem, we can think the wings of the bird as a metal rod moving across a magnetic field. So, and emf will be induced into the wings of the bird, according to the formula:
[tex]\epsilon = BvL sin \theta[/tex]
where
[tex]B=5\cdot 10^{-5} T[/tex] is the strength of the magnetic field
v = 13 m/s is the speed of the bird
L = 1.2 m is the wingspan of the bird
[tex]\theta=40^{\circ}[/tex] is the angle between the direction of motion and the direction of the magnetic field
Substituting numbers into the formula, we find
[tex]\epsilon = (5.0\cdot 10^{-5} T)(13 m/s)(1.2 m) sin 40^{\circ}=0.00050 V = 0.50 mV[/tex]
Two identical conducting spheres carry charges of +5.0 μC and –1.0 μC, respectively. The centers of the spheres are initially separated by a distance L. The two spheres are brought together so that they are in contact. The spheres are then returned to their original separation L. What is the ratio of the magnitude of the electric force on either sphere after the spheres are touched to that before they were touched? A) 1/1 B) 4/5 C) 9/5 D) 5/1 E) 4/9
Answer:
B) 4/5
Explanation:
The magnitude of the electric force between the two spheres is given by
[tex]F=k\frac{q_1 q_2}{r^2}[/tex]
where
k is the Coulombs' constant
q1 and q2 are the charges on the two spheres
r is the distance between the two spheres
Initially, we have
[tex]q_1 = 5.0\mu C=5.0\cdot 10^{-6}C\\q_2 = 1.0 \mu C=1.0 \cdot 10^{-6}C\\r = L[/tex]
So the force is
[tex]F_1=k\frac{(5.0\cdot 10^{-6}C)(1.0\cdot 10^{-6}C)}{L^2}=(5.0 \cdot 10^{-12} C^2)\frac{k}{L^2}[/tex]
Later, the two spheres are brought together so they are in contact: this means that the total charge will redistribute equally on the two spheres (because they are identical).
The total charge is
[tex]Q=q_1 + q_2 = +4.0 \mu C=4.0\cdot 10^{-6}C[/tex]
So each sphere will have a charge of
[tex]q=\frac{Q}{2}=2.0\cdot 10^{-6} C[/tex]
So, the new force will be
[tex]F_2=k\frac{(2.0\cdot 10^{-6}C)(120\cdot 10^{-6}C)}{L^2}=(4.0 \cdot 10^{-12} C^2)\frac{k}{L^2}[/tex]
And so the ratio of the two forces is
[tex]\frac{F_2}{F_1}=\frac{4.0\cdot 10^{-12} C}{5.0\cdot 10^{-12} C}=\frac{4}{5}[/tex]
After two identical conducting spheres carrying different charges come into contact and separate, their total charge is distributed evenly. Using Coulomb's Law, the ratio of the forces after and before contact is 4/5. The answer is B) 4/5.
Explanation:When two identical conducting spheres come into contact, their total charge is redistributed evenly between them. In this case, we have one sphere with a charge of +5.0 μC and another with –1.0 μC, totaling +4.0 μC for both spheres. After contact and redistribution, each sphere will have half of the total charge, which is +2.0 μC per sphere.
To find the ratio of the magnitudes of the electric forces before and after contact, we use Coulomb's Law, which states that the electric force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between their centers:F = k * |q1 * q2| / L2
Where F is the force, k is Coulomb's constant, q1 and q2 are the charges, and L is the separation distance. Before contact, the force is: Fbefore = k * |(+5.0 μC) * (–1.0 μC)| / L2 = k * 5.0 μC / L2
After contact, the force is: Fafter = k * |(+2.0 μC) * (+2.0 μC)| / L2 = k * 4.0 μC / L2
The ratio of Fafter to Fbefore is therefore (4.0/5.0 μC), which simplifies to 4/5. The answer to the question is option B) 4/5.
The motion of a car on a position-time graph is represented with a horizontal line. What does this indicate about the car’s motion?
If the line on the graph is horizontal, the car is at the same position no matter what time you look at it. That means that the car is sitting motionless in one place, and not moving. The car's speed, velocity, and acceleration are all zero, although its resale value may be decreasing.
X-rays with an energy of 400 keV undergo Compton scattering with a target. If the scattered X-rays are detected at \theta = 30^{\circ}θ=30 ∘ relative to the incident X-rays, what is the energy of the recoiling electron? [Assume that energy is conserved in this interaction]
Explanation:
Photons have momentum, this was proved by he American physicist Arthur H. Compton after his experiments related to the scattering of photons from electrons (Compton Effect or Compton Shift). In addition, energy and momentum are conserved in the process.
In this context, the Compton Shift [tex]\Delta \lambda[/tex] in wavelength when the photons are scattered is given by the following equation:
[tex]\Delta \lambda=\lambda' - \lambda_{o}=\lambda_{c}(1-cos\theta)[/tex] (1)
Where:
[tex]\lambda_{c}=2.43(10)^{-12} m[/tex] is a constant whose value is given by [tex]\frac{h}{m_{e}.c}[/tex], being [tex]h=4.136(10)^{-15}eV.s[/tex] the Planck constant, [tex]m_{e}[/tex] the mass of the electron and [tex]c=3(10)^{8}m/s[/tex] the speed of light in vacuum.
[tex]\theta=30\°[/tex] the angle between incident phhoton and the scatered photon.
We are told the scattered X-rays (photons) are detected at [tex]30\°[/tex]:
[tex]\Delta \lambda=\lambda' - \lambda_{o}=\lambda_{c}(1-cos(30\°))[/tex] (2)
[tex]\Delta \lambda=\lambda' - \lambda_{o}=3.2502(10)^{-13}m[/tex] (3)
Now, the initial energy [tex]E_{o}=400keV=400(10)^{3}eV[/tex] of the photon is given by:
[tex]E_{o}=\frac{h.c}{\lambda_{o}}[/tex] (4)
From this equation (4) we can find the value of [tex]\lambda_{o}[/tex]:
[tex]\lambda_{o}=\frac{h.c}{E_{o}}[/tex] (5)
[tex]\lambda_{o}=\frac{(4.136(10)^{-15}eV.s)(3(10)^{8}m/s)}{400(10)^{3}eV}[/tex]
[tex]\lambda_{o}=3.102(10)^{-12}m[/tex] (6)
Knowing the value of [tex]\Delta \lambda[/tex] and [tex]\lambda_{o}[/tex], let's find [tex]\lambda'[/tex]:
[tex]\Delta \lambda=\lambda' - \lambda_{o}[/tex]
Then:
[tex]\lambda'=\Delta \lambda+\lambda_{o}[/tex] (7)
[tex]\lambda'=3.2502(10)^{-13}m+3.102(10)^{-12}m[/tex]
[tex]\lambda'=3.427(10)^{-12}m[/tex] (8)
Knowing the wavelength of the scattered photon [tex]\lambda'[/tex] , we can find its energy [tex]E'[/tex] :
[tex]E'=\frac{h.c}{\lambda'}[/tex] (9)
[tex]E'=\frac{(4.136(10)^{-15}eV.s)(3(10)^{8}m/s)}{3.427(10)^{-12}m}[/tex]
[tex]E'=362.063keV[/tex] (10) This is the energy of the scattered photon
So, if we want to know the energy of the recoiling electron [tex]E_{e}[/tex], we have to calculate all the energy lost by the photon, which is:
[tex]E_{e}=E_{o}-E'[/tex] (11)
[tex]E_{e}=400keV-362.063keV[/tex]
Finally we obtain the energy of the recoiling electron:
[tex]E_{e}=37.937keV[/tex]
The energy of the recoiling electron after the Compton scattering is 38 KeV.
Wavelength of the photonsThe wavelength of the photons after the Compton scattering is calculated as follows;
λ = λ₀ + λc(1 - cosθ)
[tex]\lambda' = \frac{hc}{E_0} \ + \ 2.43 \times 10^{-12}(1 - cos\theta)\\\\\lambda' = \frac{6.63 \times 10^{-34} \times 3 \times 10^8}{400,000 \times 1.6 \times 10^{-19}} \ + \ 2.43 \times 10^{-12}(1 - cos30)\\\\\lambda ' = 3.108 \times 10^{-12} \ + \ 3.26 \times 10^{-13}\\\\\lambda ' = 3.434 \times 10^{-12} \ m[/tex]
Energy of the emitted photonsThe energy of photons after the Compton scattering is calculated as follows;
[tex]E ' = \frac{hc}{\lambda '} \\\\E ' = \frac{6.63 \times 10^{-34} \times 3 \times 10^8}{3.434 \times 10^{-12} } \\\\E ' = 5.79\times 10^{-14} \ J\\\\E' = \frac{5.79\times 10^{-14} \ J}{1.6\times 10^{-19} J/eV} = 362,000 \ eV = 362 \ KeV[/tex]
Energy of the recoiling electronThe energy of the recoiling electron is the change in the energy of the photons.
E = 400 KeV - 362 KeV
E = 38 KeV
Learn more about Compton scattering here: https://brainly.com/question/4423091
A bucket weighing 2 kg and a rope of negligible mass is used todraw water from a well that is 40.8 meters deep. Just before thebucket starts being raised from the bottom of the well, the bucket isfilled with 6 kg of water. Unfortunately, there is a hole in the bucketand water leaks out at the rate of 0.12 kg per second. The bucketis pulled up at a constant rate of 0.8 meters per second.(a)How much water is in the bucket when the bucket reaches thetop of the well?(b)Find the work done pulling the bucket to the top of the well.(Assume that the acceleration of gravity is 9.8 meters per secondper second.)
Answer:
(a) There will be no water in the bucket by the time the bucket reaches the top of the well.
(b) The work done in this process will be approximately 1.98 × 10³ J.
Explanation:
(a)How long will it take for the bucket to reach the top of the well?
[tex]\displaystyle t = \frac{s}{v} = \rm \frac{40.8}{0.8} = 51.0\;s[/tex].
How much water will leak out during that [tex]51.0[/tex] seconds?
[tex]\rm 51.0\;s \times 0.12\;kg\cdot s^{-1} = 6.12\;kg > 6\;kg[/tex].
That's more than all the water in the bucket. In other words, all [tex]\rm 6\;kg[/tex] of water in the bucket will have leaked out by the time the bucket reaches the top of the well. There will be no water in the bucket by the time the bucket reaches the top of the well.
(b)How long will it take for all water to leak out of the bucket?
[tex]\displaystyle \rm \frac{6\; kg}{0.12\;kg \cdot s^{-1}} = 50\;s[/tex].
In other words,
For the first 50 seconds, water will leak out of the bucket. The mass of the bucket will decrease from [tex]\rm 6\;kg[/tex] to [tex]\rm2\;kg[/tex] at a constant rate.For the last 1 second, the mass of the bucket will stay constant at [tex]\rm 2\;kg[/tex].Express the mass [tex]m[/tex] of the bucket about time [tex]t[/tex] as a piecewise function:
[tex]\displaystyle m(t) = \left\{\begin{aligned} &6 - 0.12\;t,&&\;0\le t < 50\\& 2,&&\; 50\le t <51\end{aligned}[/tex].
Gravity on the bucket:
[tex]W(t) = m(t)\cdot g[/tex].
However, the bucket is moving at a constant velocity. There's no acceleration. By Newton's Second Law, the net force will be zero. Forces on the bucket are balanced. As a result, the size of the upward force shall be equal to that of gravity.
[tex]\displaystyle F(t) = W(t) = m(t)\cdot g[/tex].
The speed of the bucket [tex]v[/tex] is constant. Thus the power [tex]P[/tex] that pulls the bucket upward at time [tex]t[/tex] will be:
[tex]P(t) = F(t)\cdot v = m(t)\cdot v\cdot g[/tex].
Express work as a definite integral of power with respect to time:
[tex]\displaystyle \begin{aligned}W &= \int_{t_0}^{t_1}{P(t)\cdot dt} = \int_{t_0}^{t_1}{m(t)\cdot g \cdot v\cdot dt}\end{aligned}[/tex].
Both [tex]g[/tex] and [tex]v[/tex] here are constants. Factor them out:
[tex]\displaystyle \begin{aligned}W &= \int_{t_0}^{t_1}{m(t)\cdot g \cdot v\cdot dt} = v\cdot g\cdot \int_{t_0}^{t_1}{m(t)\cdot dt} \end{aligned}[/tex].
Integrate the piecewise function [tex]m(t)[/tex] piece-by-piece:
[tex]\displaystyle \begin{aligned}W &= v\cdot g\cdot \int_{t_0}^{t_1}{m(t)\cdot dt}\\ &=0.8\times 9.8 \left [\int_{0}^{50}(8-0.12\;t)\cdot dt + \int_{50}^{51}2\cdot dt\right]\\ &=0.8\times 9.8 \left [\left(8\;t - \frac{0.12}{2}\;t^{2}\right)\bigg|^{50}_{0} + (2\;t)\bigg|^{51}_{50}\right] \\&=0.8\times 9.8 \left [\left(8\times 50-\frac{0.12}{2}\times 50^{2}\right)+ (51\times 2 - 50\times 2)\right]\\&=\rm 1975.68\;J \end{aligned}[/tex].
Hence the work done pulling the bucket to the top of the well is approximately [tex]\rm 1.98\times 10^{3}\;J[/tex].