Answer:
The correct answer is option D, that is, water bonds with elements in the minerals that make up rock, forming new substances.
Explanation:
A hydration reaction in chemistry refers to a chemical reaction in which a substance associates with water. In the process of weathering hydration takes place when a mineral captivates water to produce a novel substance. Hydration makes the rock to increase in volume that can impart tension on the rock and make it more susceptible to other kinds of weathering processes. The two prime illustrations of hydration comprise the formation of limonite from hematite and the formation of gypsum from anhydrite.
Answer:
D. water bonds with elements in the minerals that make up rock, forming new substances.
Hope this Helps!! :))
A sample of glucose ( C6H12O6 ) of mass 8.44 grams is dissolved in 2.11 kg water. What is the freezing point of this solution? The freezing point depression constant, Kf , for water is 1.86 °C/mol. (Round your answer to the nearest thousandth)
Answer:
- 0.0413°C ≅ - 0.041°C (nearest thousands).
Explanation:
Adding solute to water causes the depression of the freezing point.We have the relation:ΔTf = Kf.m,
Where,
ΔTf is the change in the freezing point.
Kf is the freezing point depression constant (Kf = 1.86 °C/m).
m is the molality of the solution.
Molality is the no. of moles of solute per kg of the solution.
no. of moles of solute (glucose) = mass/molar mass = (8.44 g)/(180.156 g/mol) = 0.04685 mol.∴ molality (m) = no. of moles of solute/kg of solvent = (0.04685 mol)/(2.11 kg) = 0.0222 m.
∴ ΔTf = Kf.m = (1.86 °C/m)(0.0222 m) = 0.0413°C.
∴ The freezing point of the solution = the freezing point of water - ΔTf = 0.0°C - 0.0413°C = - 0.0413°C ≅ - 0.041°C (nearest thousands).
Answer:
-0.041
Explanation:
iron reacts with sulfur to form iron sulfide. If 60 grams of iron reacts with sulfur to produce 90 grams of iron sulfide how much sulfur has been used in the chemical reaction
Answer:
34.44 g.
Explanation:
The balanced equation for the reaction is:Fe + S → FeS,
It is clear that 1.0 mol of Fe reacts with 1.0 mol of S to produce 1.0 mol FeS.
We need to calculate the no. of moles of 60 grams of iron and 90 grams of iron sulfide:
no. of moles of Fe = mass/atomic mass = (60.0 g)/(55.845 g/mol) = 1.074 mol.
no. of moles of FeS = mass/molar mass = (90.0 g)/(87.91 g/mol) = 1.024 mol.
∵ Fe reacts with S with (1: 1) molar ratio.
∴ The no. of moles of S needed to react with Fe is 1.074 mol.
∴ The no. of grams of S needed = no. of moles x molar mass = (1.074 mol)(32.065 g/mol) = 34.44 g.
Answer:
The answer is:
A. 30 grams
Explanation:
Which type of solid has the lowest and highest melting point?
lowest melting point-covalent solids
highest melting point-ionic solids
Molecular solids like ice tend to have lower melting points due to weaker intermolecular forces, while ionic solids such as sodium chloride have high melting points due to strong ionic bonds. Network covalent solids also have high melting points, whereas amorphous solids soften over a range of temperatures.
Explanation:The melting point of a solid is the temperature at which the solid changes into a liquid. It reflects how much kinetic energy is required for the particles within a solid to overcome the attractive forces keeping them in place. In general, molecular solids, such as ice (melting point of 0°C), tend to have lower melting points due to weaker intermolecular forces like hydrogen bonds or London dispersion forces. On the other hand, ionic solids, such as sodium chloride (melting point of 801°C), display the highest melting points because the ionic bonds between their ions are very strong.
Network covalent solids often have high melting points as well since the atoms within the network are bonded by covalent bonds that require significant energy to break. By contrast, amorphous solids like butter do not have a sharp melting point but rather soften over a range of temperatures due to the lack of a well-ordered molecular structure like that seen in crystalline solids.
At 0°C, frozen water (ice) changes to liquid water. When an ice cube is placed on something that is warmer than it, heat will move from the warmer substance to the water until
A.
both objects are the same temperature.
B.
the ice melts.
C.
the ice reaches 0°C.
D.
the warmer substance cools to 0°C.
Answer:hi guys it is both objects are the same temperature
Explanation:
Heat transfers from a warmer object to a colder one (such as an ice cube) until both objects are at the same temperature. This is a process known as conduction.
Explanation:When an ice cube is placed on an object that is warmer than it, heat will be transferred from the warmer substance to the ice cube. This process will continue until both objects are the same temperature. This is explained by the physics law of heat transfer, specifically conduction, which is the process where heat energy is transferred between substances in direct contact with each other.
The warmer object will lose heat to the colder object (the ice cube) until equilibrium is reached and both objects have the same temperature. It may also coincide with other options like the ice melting or ice reaching 0°C, but this depends on the initial temperature of the warmer object.
Learn more about Heat Transfer here:https://brainly.com/question/13433948
#SPJ3
Which of the following is a cause of eutrophication of a lake?
Answer:
C. Excess nutrients promote the growth of algae
Explanation:
The eutrophication can simply be explained as an over-saturation of the waters with nutrients. This usually happens because of the human activity, with the largest sources that contribute to this being the fecal matter from the farmed animals and the fertilizers used in the agriculture. They are either released into the water directly or manage to reach it on their own by natural means. Once they reach the water they increase the amount of nutrients a lot, and that prompts the growth of the algae. As the algae grow more and more and occupy more and more area, they block the sunlight, so the organisms that use photosynthesis die out. Also, the algae contribute to eliminating the oxygen of the waters, so the fish and the other organisms die out as well, leading to a total collapse of the ecosystem.
How many joules are required to change 1kg of ice at-10°C to water at 15°C?
Answer:
[tex]\boxed{\text{417 kJ}}[/tex]
Explanation:
There are three heat transfers in this process:
Total heat = warming the ice + melting the ice + warming the water
q = q₁ + q₂ + q₃
q = mC₁ΔT₁ + mΔHfus + mC₂ΔT₂
Let's calculate these heat transfers separately.
Data:
m = 1 kg = 1000 g
C₁ = 2.108 J·°C⁻¹g⁻¹
C₂ = 4.184 J·°C⁻¹g⁻¹
ΔHfus = 333 J/g
Tmax = 15 °C
m.p. = 0 °C
Tmin = -10 °C
Calculations:
ΔT₁ = 0 – (-10) = 10 °C
q₁ = 1000 × 2.108 × 10 = 21 080J = 21.08 kJ
q₂ = 1000 × 333 = 333 000 J =333 kJ
ΔT₂ = 15 - 0 = 15 °C
q₃ = 1000 × 4.184 × 15 = 62 760 J = 62.76 kJ
q = 21.08 + 333 + 62.76 = 417 kJ
You must add [tex]\boxed{\textbf{417 kJ}}[/tex].
Sound travels fastest through what?
A. Space
B. Cool air
C. Warm air
D. A metal spoon
A I believe is correct
Answer:
metal spoon because travels fastest through solid objects
Explanation:
Write the chemical symbols for three different atoms with 24 electrons
Answer:
Cr
Mn⁺¹
Fe⁺²
Explanation:
35 POINTS!!!!!!!!!!!!!!
explain the concept of conservation of natural resources
Air, soil, plants, fuels and water are examples of natural resources. Some of these (ex. air & water) are renewable. Some however are nonrenewable (ex. fuels). If not conserved and protected, we may lose some of these resources to pollution or depletion.
The Earth's natural resources include air, water, soil, minerals, fuels, plants, and animals. Conservation is the practice of caring for these resourcesso all living things can benefit from them now and in the future. ... These are renewable resources. Otherresources, such as fossil fuels, cannot be replaced at all.
Source: National Geography
What is the alternate form of CaF2+H2SO+157.7KJ→CaSO4+2HF
Answer:
CaF₂+H₂SO₄ → CaSO₄+2HF ΔH = +157.7KJ
Explanation:
Energy changes in chemical reactions is one of the most important issues in thermodynamics especially the enthalpy of reaction (ΔHrxn)
(ΔHrxn) can be defined as the difference between the total enthalpy of the products and the total enthalpy of the reactants of a certain reaction.If ΔH<0 for an exothermic reaction (i.e. heat flows from a system to its surroundings) or in other words, the enthalpy of the products is less than the enthalpy of the reactantsWhile, ΔH>0 for an endothermic reaction (i.e. heat flows from the surroundings to a system) that means the enthalpy of the products is greater than the enthalpy of the reactants.In this exampleCaF₂+H₂SO₄+157.7KJ → CaSO₄+2HF
heat flows from the surroundings to a system and so ΔH>0which can be expressed in alternate form as following
CaF₂+H₂SO₄ → CaSO₄+2HF ΔH = +157.7KJ
____________ A measurement of the amount of space an object occupies.
Volume is a measurement if the amount of space an object occupies.
Which is a characteristic of nuclear fusion?
Answer:
The correct answer is B
Explanation:
Nuclear Fusion is a raection in which two or more atomic nuclei are combined together to form a heavier nuclei.
The study of chemicals and bonds is called chemistry. The element is made of electrons, protons, and neutrons.
The correct answer is option B that is involves the collision of two nuclei.
What are nuclei?The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom.
Fusion means the joining of two-component and according to the question, the correct answer is option B.
For more information about the nuclei, refer to the link:-
https://brainly.in/question/9531558
1. scientists can use rock layers to determine which of the following?
A. The mass of Earth
B. The size of Earth
C. The age of Earth
D. The amount of land on Earth
2. Fossils in ________ layers of rock are generally estimated to be ______ than fossils found in the deeper layers.
A. older, younger
B. newer, younger
C. older, older
D. newer, older
3. New evidence can lead to a change in scientific knowledge
true or false
Answer:1. Age of earth 2. D. Newer, Older 3. True
Explanation:
Scientists use rock layers to determine the age of Earth. Fossils in newer, or higher, rock layers are typically younger than those in older or deeper layers. And yes, new evidence can indeed lead to changes in scientific understanding.
Explanation:1. Scientists use rock layers primarily to determine the age of Earth. They do this through a method called stratigraphy, wherein they study the arrangement of rock layers and relative ages to understand the Earth's past. So, the correct answer is C. The age of Earth.
2. Generally, fossils found in newer layers of rock are estimated to be younger than those found in deeper (or older) layers. As sediment is deposited over time, newer layers form on top of older ones, and as a result, newer fossils are typically found closer to the surface. So the correct answer is B. newer, younger.
3. True. New evidence can definitely lead to a change in scientific knowledge. Science is a dynamic and evolving field and new discoveries or data can modify or even completely change previously held theories and understandings.
Learn more about Rock layers and Fossils here:https://brainly.com/question/7357093
#SPJ3
I DONT UNDERSTAND!!!!
Answer:
[tex]\boxed{\text{311 K}}[/tex]
Explanation:
We can use the Ideal Gas Law and solve for T.
pV = nRT
Data:
p = 0.998 atm
V = 1.20 L
n = 0.0470 mol
R = 0.082 06 L·atm·K⁻¹mol⁻¹
Calculation:
0.998 × 1.20 = 0.0470 × 0.082 06 × T
1.198 = 0.003 857T
[tex]T = \dfrac{1.198}{0.003 857} = \textbf{311 K}[/tex]
The Kelvin temperature is [tex]\boxed{\textbf{311 K}}[/tex], not 307 K.
I suppose you could choose the last square, as it has the closest value.
A geochemist examines a piece of metal that he found in the soil. He performs tests to identify the metal from its density, electrical conductivity, and melting point. Which statement best describes his investigation? He is determining physical properties that are sufficient to identify the metal. He is determining chemical properties that are sufficient to identify the metal. He is determining physical properties that are insufficient to identify the metal. He is determining chemical properties that are insufficient to identify the metal.
Answer:
He is determining physical properties that are sufficient to identify the metal.
Explanation:
A physical property is an aspect of matter that can be observed or measured without changing it. Examples of physical properties include color, molecular weight and volume. A chemical property may only be observed by changing the chemical identity of a substance.Density, electrical conductivity, and melting point are considered as physical properties and are sufficient to identify a metal as these properties are independent of the amount of substance being examined.These properties are known as intensive properties and are used to identify a substance by comparing the obtained values with standard values.So, the right choice is:
He is determining physical properties that are sufficient to identify the metal.
A! He is determining physical that are sufficient to identify the metal.
A 2.5-liter sample of a gas at 2.0 atm and 300.0 K has 0.30 mole of the gas. If 0.15 mole of the gas is added to the sample at the same temperature and pressure, what is the final volume of the gas? 3.4 liters 3.8 liters 4.2 liters 4.7 liters
Answer:
3.8 liters
Explanation:
According to Avogadro’s Law of gases
at constant temperature and pressure, the volume of all gases constitutes an equal number of molecules. In other words, the volume of any gas is directly proportional to the number of molecules of that gas.
∴ V ∝ n or (V₁/V₂) = (n₁/n₂)
V₁= 2.5 L
n₁= 0.3 mol
n₂= 0.3 mol + 0.15 mol = 0.45 mol
using cross multiplication
(2.5 L / V₂) = (0.3 mol / 0.45 mol)
V₂= 3.8 L
∴ The right choice is 3.8 liters
Answer:
3.8 liters
Explanation:
The specific gravity of iron is 7.87, and the density of water at 4.00 ∘C is 1.00 g/cm3. You can use this information to find the density of iron.
Find the volume occupied by 7.00 g of iron.
Solution:
Density of iron( d)=?
Specific gravity of iron=7.87
Density of water at 4°C=1g/cm^3
we have,
specific gravity =density of object/density of water at 4°C
or,7.87=d/1
or, d=7.87g/cm^3
Again,
density=mass/ volume
or,7.87=7/V
or,V=7/7.87
or,V=0.88cm^3
therefore, volume occupied by iron is 0.88cm^3
What is the purpose of graphics in scientific articles
Answer:
Graphics can sometimes convey more information in a brief amount of space than an author can explain in a paragraph.
H2S polar or nonpolar ?
Answer:
Hydrogen sulfide is nonpolar. Even though the molecular geometry would allow for it to polar, the bonds are not polar, so the molecule isn't either. Polarity is determined by electronegativity.
[tex]H_2S[/tex] is a polar substance.
Explanation:Polar particles form when two molecules don't share electrons similarly in a covalent bond. This happens when there is a distinction between the electronegativity of every molecule. An extraordinary distinction shapes an ionic bond, while a lesser contrast frames a polar covalent bond.
If the electronegativity between the two ions is somewhere in the range of 0.5 and 2.0, the structure of the particle forms a polar covalent bond. In the event that the electronegativity distinction between the ions is more than 2.0, the bond is ionic. Ionic mixes are amazingly polar particles.
Instances of polar particles include:
Water - [tex]H_2O[/tex] Ammonia salts - [tex]NH_3[/tex] Sulfur dioxide - [tex]SO_2[/tex] Hydrogen sulfide - [tex]H_2S[/tex]A gas occupies 49 liters at a pressure of 367 mm Hg. What is the volume when the pressure is increased to 784 mm Hg?
Answer:
22.94 L.
Explanation:
We can use the general law of ideal gas: PV = nRT.
where, P is the pressure of the gas in atm.
V is the volume of the gas in L.
n is the no. of moles of the gas in mol.
R is the general gas constant,
T is the temperature of the gas in K.
If n and T are constant, and have two different values of V and P:
P₁V₁ = P₂V₂
P₁ = 367.0 mm Hg, V₁ = 49.0 L.
P₂ = 784.0 mm Hg, V₂ = ??? L.
∴ V₂ = P₁V₁/P₂ = (367.0 mm Hg)(49.0 L)/(784.0 mm Hg) = 22.94 L.
what is the percent of O in CO2
72.71 . simple google search, you shouldnt waste points
For this case we have the [tex]CO_ {2}[/tex]
It is composed of one atom of carbon and two of oxygen.
The atomic mass of carbon and oxygen, which can be found in a periodic table, are given by:
[tex]C: 12 \frac {g} {mol}\\O: 16 \frac {g} {mol}[/tex]
Then, we find the atomic mass of [tex]CO_{2}[/tex]:
[tex]1 * 12 \frac {g} {mol} = 12 \frac {g} {mol}\\2 * 16 \frac {g} {mol} = 32 \frac {g} {mol}[/tex]
Adding we have:
[tex]44 \frac {g} {mol}[/tex]
To find the percentage of oxygen, we divide the atomic mass of the two oxygen atoms between that of [tex]CO_{2}:[/tex]
[tex]\frac {32} {44} * 100 = 72.73[/tex]%
Thus, the percentage of oxygen is 72.73%
Answer:
72.73%
The element sodium (Na) is a soft solid that will react explosively with water. The element chlorine (Cl) is a toxic gas. When these two elements combine, they produce a stable, crystalline solid known commonly as table salt (NaCl). How would you explain this?
Select one:
When substances combine to form new substances, the properties of the reactants are preserved.
When substances combine to form new substances, the properties of the resulting substances will be different than those of the reactants.
Sodium and chlorine become different elements during the reaction.
The properties of each of the two original elements are combined to give salt its properties.
Answer:
When substances combine to form new substances, the properties of the reactants are preserved.
Explanation:
When the two elements Na and Cl combine, they produce a stable, crystalline solid known commonly as table salt. This explains as when substances combine to form new substances, the properties of the reactants are preserved. Therefore, option A is correct.
What do you mean by the term element?Elements are pure substances that cannot be broken down into simpler substances by chemical means. They are made up of atoms, which have a specific number of protons in their nucleus that defines their atomic number.
In a chemical reaction, the atoms that form the first substances are regrouped into other molecules, and these new substances have various properties from those of the reactants. The total number of all types of atoms is kept, and thus the mass does not change.
Thus, option A is correct.
To learn more about the element, follow the link:
https://brainly.com/question/13025901
#SPJ3
Which half-reaction correctly describes an oxidation?
Answer:
The last choice is oxidation.
Explanation:
The this is a reaction in which the oxidation number of chromium metal
( 0 ) goes the an oxidation number of 3 in Cr3+.
Answer : The correct option is, [tex]Cr(s)\rightarrow Cr^{3+}(aq)+3e^-[/tex]
Explanation :
Redox reaction : It is a reaction in which the oxidation and reduction reaction takes place simultaneously.
Oxidation reaction : It is a reaction in which a substance looses its electrons. In this, oxidation state of an element increases. Or we can say that in oxidation, the loss of electrons takes place.
Reduction reaction : It is a reaction in which a substance gains electrons. In this, oxidation state of an element decreases. Or we can say that in reduction, the gain of electrons takes place.
The correct oxidation-half reaction will be :
[tex]Cr(s)\rightarrow Cr^{3+}(aq)+3e^-[/tex]
In this half oxidation reaction, the oxidation state of 'Cr' changes from (0) to (+3) that means the oxidation state increases that means it shows oxidation.
Calculate Delta H in KJ for the following reactions using heats of formation:
a) 2C2H6 (g) + 7O2 (g) ---> 4CO2 (g) +6H2O (g)
b) 2PbO (s) + PbO2 (s) ---> Pb3O4 (s)
Answer:
(a)[tex]\Delta H\textdegree = -2856.8\;\text{kJ}[/tex] per mole reaction.
(b)[tex]\Delta H\textdegree = -22.3\;\text{kJ}[/tex] per mole reaction.
Explanation:
What is the standard enthalpy of formation [tex]\Delta H_f\textdegree{}[/tex] of a substance? [tex]\Delta H_f\textdegree{}[/tex] the enthalpy change when one mole of the substance is formed from the most stable allotrope of its elements under standard conditions.
Naturally, [tex]\Delta H_f\textdegree{} = 0[/tex] for the most stable allotrope of each element under standard conditions. For example, oxygen [tex]\text{O}_2[/tex] (not ozone [tex]\text{O}_3[/tex]) is the most stable allotrope of oxygen. Also, under STP [tex]\text{O}_2[/tex] is a gas. Forming [tex]\text{O}_2\;(g)[/tex] from itself does not involve any chemical or physical change. As a result, [tex]\Delta H_f\textdegree{} = 0[/tex] for [tex]\text{O}_2\;(g)[/tex].
Look up standard enthalpy of formation [tex]\Delta H_f\textdegree{}[/tex] data for the rest of the species. In case one or more values are not available from your school, here are the published ones. Note the state symbols of the compounds (water/steam [tex]\text{H}_2\text{O}[/tex] in particular) and the sign of the enthalpy changes.
[tex]\text{C}_2\text{H}_6\;(g)[/tex]: [tex]-84.0\;\text{kJ}\cdot\text{mol}^{-1}[/tex];[tex]\text{CO}_2\;(g)[/tex]: [tex]-393.5\;\text{kJ}\cdot\text{mol}^{-1}[/tex];[tex]\text{H}_2\text{O}\;{\bf (g)}[/tex]: [tex]-241.8\;\text{kJ}\cdot\text{mol}^{-1}[/tex];[tex]\text{PbO}\;(s)[/tex]: [tex]-217.9\;\text{kJ}\cdot\text{mol}^{-1}[/tex];[tex]\text{PbO}_2\;(s)[/tex]: [tex]-276.6\;\text{kJ}\cdot\text{mol}^{-1}[/tex];[tex]\text{Pb}_3\text{O}_4\;(s)[/tex]: [tex]-734.7\;\text{kJ}\cdot\text{mol}^{-1}[/tex]How to calculate the enthalpy change of a reaction [tex]\Delta H_\text{rxn}[/tex] (or simply [tex]\Delta H[/tex] from enthalpies of formation?
Multiply the enthalpy of formation of each product by its coefficient in the equation.Find the sum of these values. Label the sum [tex]\Sigma (n\cdot \Delta_f(\text{Reactants}))[/tex] to show that this value takes the coefficients into account.Multiply the enthalpy of formation of each reactant by its coefficient in the equation.Find the sum of these values. Label the sum [tex]\Sigma (n\cdot \Delta_f(\text{Products}))[/tex] to show that this value takes the coefficient into account.Change = Final - Initial. So is the case with enthalpy changes. [tex]\Delta H_\text{rxn} = \Sigma (n\cdot \Delta_f(\textbf{Products})) - \Sigma (n\cdot \Delta_f(\textbf{Reactants}))[/tex].For the first reaction:
[tex]\Sigma (n\cdot \Delta_f(\text{Reactants})) = 4\times (-393.5) + 6\times (-241.8) = -3024.8\;\text{kJ}\cdot\text{mol}^{-1}[/tex];[tex]\Sigma (n\cdot \Delta_f(\text{Products})) = 2\times (-84.0) + 7\times 0 = -168.0\;\text{kJ}\cdot\text{mol}^{-1}[/tex];[tex]\begin{aligned}\Delta H_\text{rxn} &= \Sigma (n\cdot \Delta_f(\textbf{Products})) - \Sigma (n\cdot \Delta_f(\textbf{Reactants}))\\ &= (-3024.8\;\text{kJ}\cdot\text{mol}^{-1}) - (-168.0\;\text{kJ}\cdot\text{mol}^{-1})\\ &= -2856.8\;\text{kJ}\cdot\text{mol}^{-1} \end{aligned}[/tex].Try these steps for the second reaction:
[tex]\Delta H_\text{rxn} = -22.3\;\text{kJ}\cdot\text{mol}^{-1}[/tex].
how many grams of water can be produced when 8.73 moles of benzene react with excess oxygen?
Answer:
471 g
Explanation:
When 8.73 moles of benzene react with excess oxygen, approximately 471.42 grams of water will be produced.
Explanation:In order to find out how many grams of water are produced from the reaction of 8.73 moles of benzene (C6H6) with excess oxygen (O2), we need to know the balanced chemical reaction. The combustion reaction for benzene looks like this:
C6H6 + 7.5O2 -> 6CO2 + 3H2O
From the balanced combustion reaction, it can be seen that for each mole of benzene reacting, 3 moles of water are produced. So, if 8.73 moles of benzene react, it would yield 3 times this many moles of water: 8.73*3 = 26.19 moles of water.
As the molar mass of water (H2O) is approximately 18 g/mole, we can calculate grams of water by multiplying moles of water and molar mass of water.
26.19 moles * 18 g/mole = 471.42 grams of water
So, approx 471.42 grams of water can be produced when 8.73 moles of benzene react with excess oxygen.
Learn more about Molar Stoichiometry here:https://brainly.com/question/9403678
#SPJ3
The table shows the concentration of a reactant in the reaction mixture over a period of time.
Reactant Concentration
Time Concentration
0 s 1.8 M
210 s 1.2 M
450 s 0.8 M
580 s 0.6 M
720 s 0.4 M
What is the average rate of the reaction over the first 580 seconds?
A. 1.6 × 10−3
B. 1.9 × 10−3
C. 2.0 × 10−3
D. 2.2 × 10−3
The average rate of the reaction over the first 580 seconds is approximately [tex]2.07 \times 10^{(-3)} M/s[/tex]. Thus, option C is correct.
To find the average rate of the reaction over the first 580 seconds, we can use the formula:
[tex]\[ \text{Average rate} = \frac{\text{Change in concentration}}{\text{Change in time}} \][/tex]
Given the concentrations at 0 s and 580 s, and the corresponding times, we can calculate the change in concentration and change in time:
Change in concentration = 1.8 M - 0.6 M = 1.2 M
Change in time = 580 s - 0 s = 580 s
Now, we can calculate the average rate:
Average rate = [tex]\(\frac{1.2 \text{ M}}{580 \text{ s}}\)[/tex]
Average rate = [tex]\(2.07 \times 10^{-3}\) M/s[/tex]
Therefore, the average rate of the reaction over the first 580 seconds is approximately [tex]2.07 \times 10^{(-3)} M/s[/tex]. Since this is closest to option C [tex](2.0 \times 10^{(-3)})[/tex], the answer is C.
A solution was prepared by mixing 50.0 g
MgSO4
and 1000.0 mL water at 25.0°C. The density of the water at this temperature is 0.997 g/mL. What is the percent mass of
MgSO4
in this solution? (Round your answer to the nearest hundredth.)
Answer:
4.78 %.
Explanation:
mass percent is the ratio of the mass of the solute to the mass of the solution multiplied by 100.
mass % = (mass of solute/mass of solution) x 100.
mass of MgSO₄ = 50.0 g,
mass of water = d.V = (0.997 g/mL)(1000.0 mL) = 997.0 g.
mass of the solution = mass of water + mass of MgSO₄ = 997.0 g + 50.0 g = 1047.0 g.
∴ mass % = (mass of solute/mass of solution) x 100 = (50.0 g/1047.0 g) x 100 = 4.776 % ≅ 4.78 %.
The percent mass of [tex]MgSO_4[/tex] in the solution is approximately [tex]4.77\%[/tex].
To find the percent mass of [tex]MgSO_4[/tex] in the solution, we need to calculate the total mass of the solution and then determine the mass of [tex]MgSO_4[/tex] in it.
Given:
[tex]Mass \ of \ MgSO_4 = 50.0 \ g[/tex]
[tex]Volume \ of \ water = 1000.0\ mL[/tex]
[tex]Density\ of\ water = 0.997 \ g/mL[/tex]
First, we'll find the mass of the water using its density:
[tex]\[ \text{Mass of water} = \text{Density} \times \text{Volume} \][/tex]
[tex]\[ \text{Mass of water} = 0.997 \, \text{g/mL} \times 1000.0 \, \text{mL} \][/tex]
[tex]\[ \text{Mass of water} = 997 \, \text{g} \][/tex]
Now, we'll calculate the total mass of the solution:
[tex]\[ \text{Total mass of solution} = \text{Mass of MgSO}_4 + \text{Mass of water} \][/tex]
[tex]\[ \text{Total mass of solution} = 50.0 \, \text{g} + 997 \, \text{g} \][/tex]
[tex]\[ \text{Total mass of solution} = 1047 \, \text{g} \][/tex]
Next, we'll determine the percent mass of [tex]MgSO_4[/tex] in the solution:
[tex]\[ \text{Percent mass of MgSO}_4 = \left( \frac{\text{Mass of MgSO}_4}{\text{Total mass of solution}} \right) \times 100\% \][/tex]
[tex]\[ \text{Percent mass of MgSO}_4 = \left( \frac{50.0 \, \text{g}}{1047 \, \text{g}} \right) \times 100\% \][/tex]
[tex]\[ \text{Percent mass of MgSO}_4 = 4.77\% \][/tex]
Use this diagram to determine which of the following statements is true.
Answer:
D. Catalysts speed up the rate of reactions by lowering the amount of energy required for the reaction to proceed.
Explanation:
A catalyst is a substance that:
speeds up the rate of a reaction .does not alter the products of the reaction .is unchanged chemically and in mass at the end of the reaction.A catalyst provides an alternative reaction pathway that has a lower activation energy than the uncatalyzed reaction.
The figure shows how the energy of the reactants and products change during a reaction.
Fill in the blank
you can find the run by subtracting the ________ -coordinate of the left point from that of the right point
you can find the run by subtracting the X coordinate of the left point from that of the right point
You can find by subtracting the variable
A rectangular prism of volume 84 cm 3 has a mass of 760 g. What is the density of the rectangular prism? 5.8 g•cm 3 9.0 g/cm 3 68 g/cm 3 0.11 cm 3 /g
Answer:
9.0 g/cm³
Explanation:
Density can be computed with the formula:
[tex]D=\dfrac{M}{V}[/tex]
Where:
D = Density
M = Mass
V = Volume
In your problem we are given:
84 cm³ = volume
760 g = mass
So we just plug in our given into the formula:
[tex]D=\dfrac{M}{V}[/tex]
[tex]D=\dfrac{760g}{84cm^{3}}[/tex]
[tex]D=9.05g/cm^{3}[/tex]
The answer would then be:
9.0 g/cm³
Answer:
it is 9.04 or 9.0
Explanation: