Which of the answer choices best represents the approximate relative mass of the three subatomic particles?
(Select all that apply.)

protons = neutrons
electrons = neutrons
neutrons > electrons
protons > electrons

The enthalpy for the decomposition of one mole of [tex]{\text{MgO}}[/tex] is  [tex]\boxed{602\;{\text{kJ}}}[/tex].

Further Explanation:

This problem is based upon Hess’s Law. Hess’s law is utilized for calculating the enthalpy change of a reaction that can be obtained simply by summation of two or more reactions. In accordance with the Hess’s law, [tex]\Delta H[/tex] of an overall reaction is obtained by adding the enthalpy change for each individual step reaction involved to obtain the overall reaction.

[tex]\boxed{\Delta\text{H}_{\text{overallrxn}}=\Delta\text{H}_{1}+\Delta\text{H}_{2}+......+\Delta\text{H}_{n}}[/tex]

Enthalpy is defined as state function and therefore its value depends upon the initial and final state of system but not upon the path. This is the reason that the overall reaction can be simply obtained by adding or subtracting the enthalpy change of the individual steps utilized to get the final reaction.

1. Combination reactions:

These reactions are also known as synthesis reaction. These are the reaction in which two or more reactants combine to form single product. These are generally accompanied by the release of heat so they are exothermic reactions.

Examples of combination reactions are as follows:

(a) [tex]{\text{Ba}} + {{\text{F}}_2}\to{\text{Ba}}{{\text{F}}_2}[/tex]

(b) [tex]{\text{CaO}}+{{\text{H}}_2}{\text{O}} \to{\text{Ca}}{\left( {{\text{OH}}} \right)_2}[/tex]

2. Decomposition reactions:

The opposite of combination reactions is called as decomposition reaction. Here, a single reactant gets broken into two or more products. Such reactions are usually endothermic because energy is required to break the existing bonds between the reactant molecules.

Examples of decomposition reactions are as follows:

(a) [tex]2{{\text{H}}_2}{{\text{O}}_2}\to2{{\text{H}}_2}{\text{O}}+{{\text{O}}_2}[/tex]

(b) [tex]2{\text{NaCl}}\to{\text{2Na+C}}{{\text{l}}_2}[/tex]

The combination reaction for the formation of [tex]{\text{MgO}}[/tex] is as follows:

[tex]{\text{2Mg}}\left(s\right)+{{\text{O}}_2}\left(g\right)\to2{\text{MgO}}\left(s\right)[/tex]

The value of [tex]\Delta {H_1}[/tex] is [tex]180.7{\text{ kJ}}[/tex].

Step 1: The enthalpy change of the following reaction is [tex]\Delta {H_1}[/tex] .

[tex]{\text{2Mg}}\left(s\right)+{{\text{O}}_2}\left(g\right)\to2{\text{MgO}}\left(s\right)[/tex]    ......(1)

The decomposition reaction of [tex]{\text{MgO}}[/tex] is as follows:

[tex]2{\text{MgO}}\left(s\right)\to{\text{2Mg}}\left(s\right)+{{\text{O}}_2}\left(g\right)[/tex]

Step 2: The enthalpy change of the following reaction is [tex]\Delta {H_2}[/tex].

[tex]2{\text{MgO}}\left(s\right) \to{\text{2Mg}}\left(s\right)+{{\text{O}}_2}\left(g\right)[/tex]                                              ......(2)

The reaction (2) can be obtained by reversing the reaction (1) so the value of [tex]\Delta {H_2}[/tex] can be obtained as follows:

[tex]\begin{aligned}\Delta {H_2}&=-\Delta {H_1}\\&=-\left({-1204\;{\text{kJ}}}\right)\\&=1204\;{\text{kJ}}\\\end{aligned}[/tex]

In the decomposition reaction,two moles of [tex]{\mathbf{MgO}}[/tex]  dissociates to give two moles of [tex]{\mathbf{Mg}}[/tex] and one mole of [tex]{{\mathbf{O}}_{\mathbf{2}}}[/tex] and therefore the enthalpy for the decomposition of one mole of  is as follows:

[tex]\begin{aligned}{\text{Enthalpy for decomposition of 1 mole}}&=\frac{{\Delta {H_2}}}{2}\\&=\frac{{1204\;{\text{kJ}}}}{2}\\&=602\;{\text{kJ}}\\\end{aligned}[/tex]

Hence, enthalpy for decomposition of one mole of [tex]{\mathbf{MgO}}[/tex] is [tex]{\mathbf{602}}\;{\mathbf{kJ}}[/tex].

Learn more:

1. Dissociation of ionic compounds: https://brainly.com/question/5425813

2. Calculation of moles of HCl: https://brainly.com/question/5950133

Answer details:

Grade: Senior school

Subject: Chemistry

Chapter: Thermodynamics

Keywords: Hess’s Law, enthalpy, MgO, O2, Mg, 1204 kj, -1204 kj, 602 kj , -602 kj overall reaction, adding, state function, initial state, and final state.

The heat required to decompose 1 mole of MgO is 602 kJ/mol.

The equation of the reaction is;

2Mg(s) + O2(g) → 2MgO(s) ΔH=−1204 kJ

The equation as written is called a thermochemical equation. It shows the amount of energy lost or gained in a reaction.

We can write the equation for the decomposition of MgO as follows;

2MgO(s) → 2Mg(s) + O2(g) ΔH= 1204 kJ

Recall that energy is absorbed to decompose MgO hence ΔH is positive.

From the stoichiometry of the reaction;

2 moles of MgO requires 1204 kJ of heat

1 mole of MgO requires 1 mole ×  1204 kJ/2 moles

= 602 kJ/mol

Learn more: https://brainly.com/question/13155407

To create a buffer solution at pH 3.0, we calculate the amount of sodium fluoride (NaF) needed using the Henderson-Hasselbalch equation and the molar mass of NaF. The needed base/acid ratio is 0.66, and for 100 ml of 1 M HF, we require 0.066 moles of F-, resulting in 2.767 g of NaF.

The question involves calculating the pH of a buffer solution made from hydrofluoric acid (HF) and sodium fluoride (NaF). A buffer solution is prepared by mixing a weak acid with its conjugate base, or a weak base with its conjugate acid, which allows the solution to resist changes in pH when small amounts of acid or base are added.

To determine the amount of NaF needed to create a buffer at pH 3.0 with 100 ml of 1 M HF, we utilize the Henderson-Hasselbalch equation, which relates the pH of the buffer solution to the pKa of the acid and the ratio of the concentrations of the conjugate base to the conjugate acid. For HF, with a Ka of 6.6 x 10-4, the required base/acid ratio is 0.66. Since 100 ml of 1 M HF contains 0.1 moles of HF, we need 0.066 moles of F-, which is the dissociated form of NaF in solution. With the molar mass of NaF being 41.99 g/mol, the amount of NaF required is 2.767 g (0.066 moles × 41.99 g/mol).

To calculate the pH of a buffer solution containing HF and NaF, the Henderson-Hasselbalch equation is used with the known concentrations of acid and base. The molar mass of NaF aids in determining the required amount of NaF for a given buffer capacity at a specific pH.

To calculate the pH of a solution that is 0.30 M in HF and 0.15 M in NaF, we can use the Henderson-Hasselbalch equation since HF (hydrofluoric acid) and NaF (sodium fluoride) form a buffer system. The equation is pH = pKa + log([A-]/[HA]), where [A-] is the concentration of the conjugate base (F- from NaF) and [HA] is the concentration of the conjugate acid (HF). Since NaF completely dissociates in water to give F- ions, the concentration of F- is 0.15 M. HF, being a weak acid, does not completely dissociate, so its concentration remains 0.30 M. However, the exact pKa value of HF is needed to complete the calculation. If we want to prepare a buffer at pH 3.0 using 100 ml of 1 M HF and NaF, the molar mass of NaF (41.99 g/mol) is used to find the amount of NaF needed to achieve the desired Base/Acid ratio of 0.66, which can be calculated to be approximately 2.767 grams of NaF.

Final answer:

When you smell an onion being cut in the kitchen, it is because of a process called diffusion. The molecules of the onion's odor travel through the air and reach your nose, where they bind to olfactory receptors and send signals to your brain. Other substances that can be detected through smell also exhibit this diffusion behavior.

Explanation:

When you walk into your house and smell the onion being cut in the kitchen, you are able to smell it because of a process called diffusion. Diffusion is the net movement of particles from an area of greater concentration to an area of lesser concentration. The particles of the onion's odor travel through the air and reach your nose, where they bind to specialized olfactory receptors in your olfactory epithelium. These receptors send signals to your brain, allowing you to perceive the smell of the onion.

Other substances that exhibit this behavior and can be detected through your sense of smell include various gases, volatile compounds, and particulate matter. For example, the smell of coffee, flowers, or gasoline are all due to molecules in the air that reach your olfactory receptors through diffusion.

The diatomic species C2^2+ is diamagnetic, while the species Li2- and B2^2- are paramagnetic due to the presence of unpaired electrons.

In chemistry, a species is paramagnetic if it has at least one unpaired electron and is diamagnetic if it has no unpaired electrons. Here, we can determine these characteristics by filling out molecular orbital diagrams and checking for unpaired electrons.

For C2^2+, two electrons are removed, making this molecule diamagnetic with no unpaired electrons. Li2- gains an electron, so it becomes paramagnetic with one unpaired electron. B2^2- gains two electrons, but it still remains paramagnetic because these two gained electrons will not pair up.

https://brainly.com/question/34190080

#SPJ6

Explanation:

[tex]3CO(g)+Fe_2O_3(s)\rightarrow 2Fe(s)+3CO_2(g)[/tex]

1)Mass of CO when 210.3 g of Fe produced.

Number of moles of [tex]Fe[/tex] in 210.3 g=

[tex]\frac{\text{Given mass of Fe}}{\text{Molar mass of Fe}}[/tex]

[tex]=\frac{210.3}{55.84 g/mol}=3.76 mol[/tex]

According to reaction, 2 moles of Fe are obtained from 3 moles of CO, then 3.76 moles of Fe will be obtained from : [tex]\frac{3}{2}\times 3.76 moles[/tex] of CO that is 5.64 moles.

Mass of CO in 5.64 moles =

[tex]\text{Number of moles}\times \text{molar mass of CO}=5.46\times 28 g/mol=157.92 g[/tex]

2)Mass of CO when 209.7 g of Fe produced.

Number of moles of [tex]Fe[/tex] in 209.7 g=

[tex]\frac{\text{Given mass of Fe}}{\text{Molar mass of Fe}}[/tex]

[tex]=\frac{209.7}{55.84 g/mol}=3.75 mol[/tex]

According to reaction, 2 moles of Fe are obtained from 3 moles of CO, then 3.75 moles of Fe will be obtained from : [tex]\frac{3}{2}\times 3.75 moles[/tex] of CO that is 5.625 moles.

Mass of CO in 5.625 moles =

[tex]\text{Number of moles}\times \text{molar mass of CO}=5.625\times 28 g/mol=157.5 g[/tex]

Answer:

5.625 moles. took the test

Answer : (C) The heat of fusion for water is the amount of energy needed for water to melt.

Explanation :

Heat of fusion : It is calculate the amount of energy required for melting of a substance to change its states from solid to liquid at constant pressure.

Fusion is a process in which phase changes from solid to liquid.

In case of water, the solid ice converted into liquid water by the process of melting.

The reaction of phase changes in water is,

[tex]Ice(s)\overset{Fusion}{\rightarrow} Water(l)[/tex]

Final answer:

When analyzing the reaction A + 3B \(\rightarrow\) 4C with 3.0 moles of A and 6.0 moles of B, B becomes the limiting reactant because it is not present in sufficient quantity to fully react with A, leaving some A unreacted.

Explanation:

Given the equation A + 3B \(\rightarrow\) 4C, we are dealing with a stoichiometry problem where 3.0 moles of A is reacted with 6.0 moles of B. To determine which reactant is leftover, we analyze the stoichiometric relationships. According to the equation, for every mole of A, we need 3 moles of B to completely react. For 3.0 moles of A, 9.0 moles of B would be required. Since only 6.0 moles of B are available, B becomes the limiting reactant. Consequently, some amount of A will not react and will be left over.

Therefore, choice a is incorrect because it misinterprets the stoichiometry required for A. Choice b is incorrect as it confuses the product formation with the reactant consumption. Choice c and choice e are incorrect because B, not having more moles than required, cannot be leftover or support a scenario where neither reactant is leftover. Choice d is the correct choice, as it accurately reflects the stoichiometric relationship that 3 moles of B react with every 1 mole of A, making B the limiting reactant due to its insufficient quantity to react with all of A provided.

Each materials have a specific density. In general, the density of liquids are less as compared to the solids whereas the gases are less dense as compared to liquids. Here the density of 'Kr' gas at STP is 3.7386 g / L.

The density is the measurement of how tightly a material is packed together. It can also be defined as the ratio of the mass to the volume. It is a unique property of a particular object. Its SI unit is kg / m³.

The equation used to calculate the density is:

Density = Mass / Volume

Mass of Krypton = 83.798 g

The volume occupied any gas at STP (Standard temperature and pressure) is 22.414 L.

Then the density is:

Density = 83.798 / 22.414

= 3.7386 g / L

Thus the density of krypton gas is 3.7386 g / L.

To know more about density, visit;

https://brainly.com/question/29775886

#SPJ5

In the given question, mud is a type of colloid in which particles are evenly distributed.

A colloid is a mixture in which small particles of one substance are dispersed evenly throughout another substance.

In the case of mud, small particles of dirt or clay are suspended in water, creating a mixture that is neither fully a solution nor a suspension.

The particles in mud are small enough to remain suspended in the water, but large enough to scatter light and create a cloudy appearance.

Therefore, mud is a form of colloid with evenly scattered particles.

Learn more about colloid here:

https://brainly.com/question/29667002

#SPJ6

Electronegativity measures an atom's ability to attract electrons. In covalent bonding, the electrons are shared between two atoms. However, if one atom is more electronegative, it will attract more shared electrons, potentially creating a polar covalent bond.

Electronegativity is a measure of the ability of an atom in a chemical compound to attract electrons. In covalent bonding, the electrons are shared between two atoms. However, these electrons are not always shared equally. If one atom has a higher electronegativity than the other, it will pull the shared electrons closer to itself. This can result in a polar covalent bond, where one side of the molecule carries a slight negative charge and the other side carries a slight positive charge. For example, in a water molecule (H2O), the electronegativity of oxygen is higher than that of hydrogen, leading oxygen to attract more electrons and making the bond a polar covalent bond.

Learn more about Electronegativity and Covalent Bonding here:

https://brainly.com/question/34135792

#SPJ6

Although Thomas was sitting right next to his friends in the park, he was able to smell buttered popcorn a couple of minutes before they did. He has a lower absolute threshold for smells than his friends.

Absolute threshold is defined as the minimum amount of stimulation required to trigger the sensation of touch, taste, smell, vision or hearing.  

It can also be defined as the smallest amount of a stimulus that a person can detect half a time. It is the part of neuroscience.

Thus, although Thomas was sitting right next to his friends in the park, he was able to smell buttered popcorn a couple of minutes before they did. He has a lower absolute threshold for smells than his friends.

To learn more about absolute threshold, refer to the link below:

https://brainly.com/question/13327021

#SPJ2

It will be nitrogen.

The energy associated with the formation of 1 mol of gaseous cations is The ionization energy. 1 mole of electrons will form 1 mole of gaseous atoms under standard conditions. The ionization energy decreases as you go down a group on the periodic table.

Explanation:

Ionization energy is defined as the energy required to remove the most loosely bound electron from a neutral gaseous atom.

With increase in atomic number there will also occur an increase in atomic size of the atom. As a result, there will be less force of attraction between the nucleus and the valence electrons of the atom.

Hence, it is easy to remove the most loosely bound electron. Therefore, with increase in size there will occur a decrease in the size of atom.

Since, out of the given group 5A elements, arsenic is larger in size and nitrogen is the smallest. Therefore, ionization energy for nitrogen will be the highest.

Thus, we can conclude that nitrogen is the element which has the highest ionization energy.

Light with an energy of 5.09 x 10^-19 Joules corresponds to a frequency of 7.68 x 10^14 Hz and a wavelength of 391 nm.

The energy of light is given by Planck's formula, E = hv, where E is energy, h is Planck's constant (6.626 × 10^-34 Js) and v is the frequency. To find the frequency, we can rearrange the formula as v = E/h. This gives a frequency of v = 5.09 x 10^-19 / 6.626 x 10^-34 = 7.68 x 10^14 Hz or s^-1.

Next, we will find the wavelength using the equation c = fλ, where c is the speed of light in a vacuum (3 x 10^8 m/s), f is frequency, and λ is the wavelength. Therefore, λ = c/f = 3.00 x 10^8 / 7.68 x 10^14 = 3.91 x 10^-7 m or 391 nm. So, the given energy corresponds to light with a frequency of 7.68 x 10^14 Hz and a wavelength of 391 nm.

https://brainly.com/question/14761341

#SPJ2

Answer:

A. acid

Explanation:

If youve ever heard the term, hydrochlori acid, then you would know it is an acid. Since it has a ph level lower than 7 it is considered an acid, due to the fact that a base woul dbe higher than 7 and neutral would be 7. Hope this helps!

The atomic number and ionic radius increase down Group 2A, while the first ionization energy decreases. These relationships are consistent with periodic trends seen in other groups.

The relationship between atomic numbers and ionic radii in the Group 2A elements, also known as the alkaline earth metals, follows a general trend. As you move from top to bottom within the group, the atomic number increases and so does the ionic radius. This is because the number of energy levels or shells occupied by electrons increases down the group, resulting in larger atomic and ionic radii.

The relationship between atomic numbers and first ionization energies in the Group 2A elements is an inverse relationship. As the atomic number increases from top to bottom within the group, the first ionization energy generally decreases. This is because the increasing number of energy levels provides greater shielding of the outermost electrons from the positively charged nucleus, making it easier to remove an electron and requiring less energy.

These relationships are consistent with the periodic trends observed in other groups of elements as well. In general, atomic and ionic radii increase from top to bottom within a group, and first ionization energies decrease. These trends can be explained by the increasing number of energy levels/shells as you move down a group, which affects the size and attractions between the electrons and nucleus.

Answer:

0

Explanation:

Calcium sulfide has molecular formula CaS. Calcium is a metal of group 2, and sulfur, a nonmetal of group 6, and they form an ionic compound, not a molecule.

So, calcium will give 2 electrons to sulfur, so both of them will have 8 electrons in their valence shell. All these electrons will be in pairs, so there will be 0 lone pairs of electrons.

The nucleus of an atom is the central core and is composed of protons and neutrons.

The nuclei of most atoms usually have more neutrons than protons.

The nuclei are dense, but they are positively charged because of the protons.

the central core and is composed of protons and neutrons

neucleus is positivly charged and protons are either equal or less then nuetrons

Atoms of manganese contains 25 protons.

An element is the simplest chemical substances that cannot be decomposed in a chemical reaction or by any chemical means and made up of atoms all having the same number of protons.

The identity of an element can be traced to the number of protons in its atom. The number of protons possessed by an atom is the same as its atomic number.

Manganese is a metallic chemical element with symbol Mn and an atomic number of 25.

To balance the redox equation Cr2O72– + NO → Cr3+ + NO3–, one must write the separate oxidation and reduction half-reactions, balance atoms and charges in each, ensure electrons are equal and opposite, and then combine and simplify the equation.

Steps to Balance the Redox Equation

To answer the question on how to balance the redox equation Cr2O72– + NO → Cr3+ + NO3– using half-reactions, we must apply the steps for balancing redox reactions in an aqueous solution. First, we write the oxidation and reduction half-reactions. In this case, Cr2O72– is reduced to Cr3+ and NO is oxidized to NO3–.

For the reduction half-reaction (Cr2O72– to Cr3+), we balance the oxygen by adding water molecules and the hydrogen by adding H+ ions (in acidic solution), then balance the charge by adding electrons. For the oxidation half-reaction (NO to NO3–), we balance the oxygen by adding water, the hydrogen by adding H+ ions, and finally, the charge by adding or removing electrons.

This process requires the balancing of atoms and charges in each half-reaction separately, and once that is done, we combine the two half-reactions and ensure that the electrons lost in oxidation equal the electrons gained in reduction. Finally, we simplify the equation by canceling out species that appear on both sides.