How do thermal energy and intermolecular forces behave with each other?
A certain ore yields an average of 64% iron. how much ore is needed to obtain 896 lb of iron?
Final answer:
To extract 896 lb of iron from an ore that contains 64% iron, 1400 lb of ore is needed.
Explanation:
The student asked how much ore is needed to obtain 896 lb of iron if the ore yields an average of 64% iron. To find the amount of ore required, we use the following mathematical relationship:
First, express 64% as a decimal, which is 0.64.
Next, divide the desired amount of iron by the percentage (as a decimal) of iron in the ore to find the total amount of ore needed. The equation for this is Total Ore Needed = Amount of Iron Required / Percentage of Iron in Ore.
Therefore, we divide 896 lb by 0.64 to find the total ore needed.
Performing the division, we get 896 lb divided by 0.64 equals 1400 lb of ore needed.
To summarize, 1400 lb of ore is needed to extract 896 lb of iron from an ore that contains 64% iron.
What type of bond is shown by the Lewis dot structure?
Final answer:
Lewis electron-dot structures show the bonding in covalent molecules. Covalent bonds between atoms can be indicated either with dots (:) or a dash (-). The Lewis structure or Lewis formula shows all the bonding electron pairs as lines (bonds) and lone pairs (non-bonding electron pairs) as pairs of dots around each atom in a molecule.
Explanation:
Lewis electron-dot structures show the bonding in covalent molecules. Covalent bonds between atoms can be indicated either with dots (:) or a dash (-).
The Lewis structure or Lewis formula shows all the bonding electron pairs as lines (bonds) and lone pairs (non-bonding electron pairs) as pairs of dots around each atom in a molecule. Lewis dot symbols can be used to predict the number of bonds formed by elements in a compound.
How are deltas and rivers similar?
Both are composed of ice.
Both feed into other bodies of water.
Both have high elevations.
Both travel in a north-south direction.
Answer:
Both feed into other bodies of water.
Explanation:
Hope this helps!
Good luck
Which best describes stellar equilibrium?
The balance between pressure cause heat and gravity caused by the stars mass
what is latent heat?
Answer :
Latent heat : Latent heat is defined as the amount of heat required to convert the solid into liquid or vapor and a liquid into a vapor without changing the temperature.
As there are two types of latent heat which are :
(1) Latent heat of fusion
(2) Latent heat of vaporization
Latent heat of fusion : Latent heat of fusion is defined as the amount of heat energy released or absorbed when the solid converted to liquid at atmospheric pressure at its melting point.
Latent heat of vaporization : Latent heat of vaporization is defined as the amount of heat energy released or absorbed when the liquid converted to vapor at atmospheric pressure at its boiling point.
What is the percent by mass of water in iron (ii) sulfate heptahydrate, feso4•7h2o (or what percent of the molar mass of feso4•7h2o is due to the waters of crystallization)?
The percent by mass of water in iron (II) sulfate heptahydrate, FeSO4·7H2O, is 51.00%.
Explanation:To calculate the percent by mass of water in iron (II) sulfate heptahydrate, FeSO4·7H2O, we need to determine the molar mass of the compound and the molar mass of water. The molar mass of iron (II) sulfate heptahydrate is calculated as follows:
The molar mass of Fe is 55.85 g/mol.The molar mass of S is 32.07 g/mol.The molar mass of O is 16.00 g/mol.The molar mass of H is 1.01 g/mol.The molar mass of FeSO4 is equal to (55.85 g/mol + 32.07 g/mol + (4 * 16.00 g/mol)) = 151.91 g/mol.The molar mass of FeSO4·7H2O, including the waters of crystallization, is equal to (151.91 g/mol + (7 * 18.02 g/mol)) = 247.14 g/mol.Next, we determine the molar mass of the waters of crystallization:
The molar mass of water (H2O) is 18.02 g/mol.The molar mass of the waters of crystallization (7H2O) is equal to (7 * 18.02 g/mol) = 126.14 g/mol.Finally, we calculate the percent by mass of water in iron (II) sulfate heptahydrate:
(126.14 g/mol / 247.14 g/mol) x 100% = 51.00%
How many kilocalories are released by the combustion of 18.5 g of c8h18 ?
Without the exact heat of combustion per gram of octane (C8H18), it is impossible to calculate the specific number of kilocalories released by the combustion of 18.5 g of octane. The process would involve multiplying the heat of combustion per gram by the amount of substance burned and converting the energy from kilojoules to kilocalories if necessary.
Explanation:The student is asking about the enthalpy change associated with the combustion of octane (C8H18). To answer this, we first need the heat of combustion per gram or per mole of octane, which can be found in a given table or chemistry reference. However, since this value is not provided in the information given, we can't calculate the specific number of kilocalories released without it.
To find the heat released by combustion, once the heat of combustion per gram is known, you would multiply this value by the mass of the substance burned (in this case, 18.5 g of octane). Remember to convert kilojoules to kilocalories if necessary, as there are 0.239006 kilocalories in one kilojoule.
For example, if we knew that the combustion of 1 gram of octane released X kJ, then the heat released by burning 18.5 grams would be 18.5 * X kJ, which could then be converted to kilocalories.
Learn more about Combustion of Octane here:https://brainly.com/question/28469125
#SPJ3
How many significant figures are used in expressing a measurement as 0.2503 l?
Which type of elements on the periodic table would you expect to have low ionization energy?
8.Based on Kepler’s work, which best describes the orbit of a planet around the Sun?
a circle with the Sun at the very center
an ellipse with the Sun at the very center
a circle with the Sun at one edge
an ellipse with the Sun at one focus
9.The table shows information about the moons of Mars.
Moon Orbital Period (days) Average Distance from Mars (km)
Phobos 0.319 9378
Deimos 23,459
What is the orbital period of Deimos?
0.0806 days
0.798 days
1.26 days
1.59 days
10.Kepler’s first law states that the orbits of planets are ellipses with the Sun at one
_______
The orbit of a planet around the Sun is best described as an ellipse with the Sun at one focus, in line with Kepler's First Law. Planetary motion is further described by Kepler's Second and Third Laws.
Explanation:Based on Kepler's work, the best description of the orbit of a planet around the Sun is an ellipse with the Sun at one focus. This statement is in accordance with Kepler's First Law of Planetary Motion. Furthermore, Kepler's Second Law also states that each planet moves so that an imaginary line drawn from the Sun to the planet sweeps out equal areas in equal times, emphasizing the dynamical aspect of planetary motion. Lastly, Kepler's Third Law establishes that the ratio of the squares of the periods of any two planets is proportional to the ratio of the cubes of their average distances from the Sun, which is a foundational law in understanding the motion of celestial bodies within our solar system.
The orbital period of Deimos, one of Mars' moons, is not provided directly in the question, but it can usually be found in detailed astronomical datasets or scientific literature.
Learn more about Kepler's Laws of Planetary Motion here:https://brainly.com/question/35176068
#SPJ12
Is you splashed strong acid on your face, how would get rid of it?
Final answer:
In the event of a strong acid splash on the face, immediately rinse with water for at least 15 to 20 minutes, remove any contaminated clothing, and seek medical attention without delay. Do not apply any substances to the affected area before consulting a professional.
Explanation:
If you splash strong acid on your face, it is crucial to act quickly to prevent severe burns and further injury. The first step is to immediately rinse the affected area with a large amount of water for at least 15 to 20 minutes. It is essential to use lukewarm water and avoid rubbing the area, which can further damage the skin. If available, you can also use special neutralizing solutions designed for chemical burns, but water should be your first choice.
After rinsing, it is critical to seek professional medical help immediately. Do not apply any creams, ointments, or other substances to the affected area before getting medical advice. While waiting for medical help, you should remove any contaminated clothing carefully and avoid touching the burn to reduce the risk of infection and further irritation. Always be careful when handling chemicals and wear appropriate protective gear to prevent such accidents.
The process that changes the identity and number of protons in a nucleus is
A sample of n2 effuses in 255 s. how long will the same size sample of cl2 take to effuse?
Apply Graham's law of effusion to compare the rates of effusion of Nitrogen gas (N₂) and Chlorine gas (Cl₂) and calculate the time it would take for the same volume of Cl₂ as N₂ to effuse.
Explanation:The question is asking about the concept of effusion from the field of Chemistry, which refers to how quickly gases escape through a small hole. The rate of effusion for gases can be calculated using Graham's law of effusion, which states that the rate of effusion of a gas is inversely proportional to the square root of its molar mass.
In this case, the student is asking how long it would take for the same volume of Cl₂ as N₂ to effuse. Given that the molar mass of nitrogen (N₂) is approximately 28 g/mol and that of chlorine (Cl₂) is approximately 70 g/mol, we can use these values in the relation (Rate of N₂ / Rate of Cl₂) = sqrt(Molar mass of Cl₂ / Molar mass of N₂). We're told that the rate of N₂ is 255s. Hence, by inserting these values into the relation, we can find the effusion rate of Cl₂.
Learn more about Gaseous Effusion here:https://brainly.com/question/4593952
#SPJ12
1. Electronegativity is:
A) how strongly an atom pulls electrons to itself when it is bonded to other atoms
B) how much energy is needed to take an electron away from an atom
C) how large an atom is
D) the energy needed to add an electron to an atom
2. Which element has the highest electronegativity?
A) Si
B) P
C) S
D) Cl
3.Which element has the lowest electronegativity?
A) Be
B) Sr
C) Ca
D) Mg
4.Order the following elements from lowest to highest electronegativity?
F, Li, C, N, O
A) F, Li, O, N, C
B) N, C, Li, F, O
C) Li, C, N, O, F
D) Li, C, O, N, F
5.On the periodic table, electronegativity increases going down a group and decreases going across a period.
A) True
B) False
1) Electronegativity is A) how strongly an atom pulls electrons to itself when it is bonded to other atoms. 2) D. Cl has the highest electronegativity. 3) B. Sr has the lowest electronegativity.
4) C) Li, C, N, O, F is the correct order of elements from lowest to highest electronegativity. 5) B. False, Electronegativity increases from left to right across a period and decreases from top to bottom of a group.
Understanding Electronegativity in Chemistry
1. Electronegativity is the ability of an atom to attract electrons in a bond. 2.Chlorine (Cl) has the highest electronegativity among the given options because it is located further to the right on the periodic table and higher up compared to other options.3.Strontium (Sr) has the lowest electronegativity among the given options because it is located further down the group in the periodic table.4. The correct order from lowest to highest electronegativity is Li then C, followed by N, then O, and F. This sequence shows how electronegativity increases across a period from left to right.5. Electronegativity actually decreases going down a group and increases going across a period.If the density of chloroform is 1.5g /cm3 what is the mass of 50.0cm of chloroform
Answer: The mass of chloroform is 75 grams.
Explanation:
To calculate density of a substance, we use the equation:
[tex]Density=\frac{Mass}{Volume}[/tex]
We are given:
Density of chloroform = [tex]1.5g/cm^3[/tex]
Volume of chloroform = [tex]50cm^3[/tex]
Putting values in above equation, we get:
[tex]1.5g/cm^3=\frac{\text{Mass of chloroform}}{50cm^3}\\\\\text{Mass of chloroform}=75g[/tex]
Hence, the mass of chloroform is 75 grams.
How many grams of aluminum hydroxide are obtained from 13.7 g of aluminum sulfide??
Answer: The mass of aluminium hydroxide obtained is 14.196 grams.
Explanation:
To calculate the number of moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] .....(1)
Given mass of aluminium sulfide = 13.7 g
Molar mass of aluminium sulfide = 150.158 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of sodium}=\frac{23g}{150.158g/mol}=0.091mol[/tex]
The chemical reaction of aluminium sulfide with water follows the equation:
[tex]Al_2S_3+6H_2O\rightarrow 2Al(OH)_3+3H_2S[/tex]
By Stoichiometry of the reaction:
1 mole of aluminium sulfide produces 2 moles of aluminium hydroxide.
So, 0.091 moles of aluminium sulfide will produce = [tex]\frac{2}{1}\times 0.091=0.0182mol[/tex] of aluminium hydroxide.
To calculate the mass of aluminium hydroxide, we use equation 1:
Moles of aluminium hydroxide = 0.0182 moles
Molar mass of aluminium hydroxide = 78 g/mol
Putting values in equation 1, we get:
[tex]0.0182mol=\frac{\text{Mass of aluminium hydroxide}}{78g/mol}\\\\\text{Mass of aluminium hydroxide}=14.196g[/tex]
Hence, the mass of aluminium hydroxide obtained is 14.196 grams.
In the combustion chamber of an engine, the initial volume is 450 cm3 at a pressure of 1.0 atmosphere. If the piston displaces 402 cm3 of the total, what is the resulting pressure in the combustion chamber? (Assume negligible temperature change.) Hint: Calculate the new volume by subtracting the amount of space the piston takes up from the initial volume
Answer:
9.375 atm
Explanation:
Initial volume = 450 cm³
Volume displaced by the piston = 402 cm³
Final volume = Initial volume – displaced volume = 450 cm³ – 402 cm³ = 48 cm³
Initial pressure = 1.0 atm
According to Boyle’s Law,
P₁V₁ = P₂V₂
where P₁, P₂ are the initial and final pressure respectively, V₁ and V₂ are the initial and final volume respectively.
Substituting the given data we have,
450 cm³ x 1 atm = 48 cm³ x P₂
P₂ = (450 cm³ x 1 atm) / 48 cm³ = 9.375 atm
help please:)
One of the ways that acid rain is harmful is _____.
it causes chemical burns on the skin of animals.
it increases the temperature of small bodies of water.
it leaches nutrients out of plants.
it creates holes in the leaves of plants.
Compounds that have the same chemical formula but a different arrangement of atoms are called
Which step in the scientific method is conducted before a controlled experiment?
A. Form a hypothesis
B.Draw a conclusion
C.Communicate results
D.Analyze results
Which one of the following is the net ionic equation for the reaction of nitric acid with aluminum hydroxide
Option (a) 3H⁺(aq) + Al(OH)₃(s) → Al³⁺(aq) + 3H₂O(l) is the net ionic equation for the reaction between nitric acid and aluminum hydroxide. This equation represents the primary species undergoing chemical change. It excludes spectator ions to show only the substances involved in the actual chemical reaction.
Among the given options, the correct net ionic equation is:
(a) 3H⁺(aq) + Al(OH)₃ (s) → Al³⁺(aq) + 3H₂O(l)
Here is the explanation:
The complete molecular equation is:3HNO₃(aq) + Al(OH)₃(s) → Al(NO₃)₃(aq) + 3H₂O(l)This equation shows that nitric acid (HNO₃) reacts with aluminum hydroxide (Al(OH)₃) to form aluminum nitrate (Al(NO₃)₃) and water (H₂O).To find the net ionic equation, we focus on the species that actually participate in the reaction, excluding spectator ions:H⁺(aq) and OH⁻(aq) ions form water:3H⁺(aq) + Al(OH)₃ (s) → Al³⁺(aq) + 3H₂O(l)Thus, option (a) is the net ionic equation for this reaction.
Complete Question:
Which one of the following is the net ionic equation for the reaction of nitric acid with aluminum hydroxide?
(a) 3H⁺(aq) + Al(OH)₃ (s) → Al³⁺(aq) + 3H₂O(l)
(b) 3HNO₃ (aq) + Al(OH)₃ (s) → 3Al(NO₃)₃ (aq) + 3H₂O(C)
(c) 2H⁺(aq) + Al(OH)₂ (s) → Al²⁺ (aq) + 2H₂O(l)
(d) H⁺(aq) + OH⁻(aq) → H₂O(l)
(e) 3NO₃⁻(aq) + Al³⁺(aq) → Al(NO₃)₃ (aq)
How is 6.3 written in scientific notation
Unstable isotopes undergo radioactive decay. what occurs during radioactive decay?
Radioactive decay occurs when an unstable isotope emits radiation to transform into a more stable nuclide. This process releases energy, and possibly mass, and it involves various types of emissions such as alpha, beta, and gamma decay. Each isotope has a specific half-life, the period needed for half of the isotope's atoms to decay.
Explanation:During radioactive decay, an unstable isotope, also known as a radioisotope, changes spontaneously into another nuclide. This process occurs because the nuclei that are not within the band of stability are unstable and tend to achieve a more stable state. The transformation involves the release of energy and sometimes mass, as the atom's nucleus emits radiation to become more stable.
There are various types of radioactive decay, such as alpha, beta, and gamma decay. Each of these changes the composition of the original nucleus, known as the parent nuclide, resulting in a daughter nuclide. The daughter nuclide could be stable or might further decay if it is still outside the band of stability. An example of this decay process is Carbon-14, which decays into Nitrogen-14, a stable product.
In nuclear reactions, significant amounts of energy are released, which are much greater than the energies involved in chemical reactions. Furthermore, nuclear reactions, and thus radioactive decay, occur regardless of environmental conditions such as temperature and pressure. Each radioisotope has a characteristic half-life, the time required for half of its atoms to decay.
An atom that contains six protons six neutrons and six electrons has a mass of approximately
This atom is a carbon atom and the sum of its protons and neutrons, each with a mass of approximately 1 atomic mass unit, gives it an atomic mass number of 12.
Explanation:The atom in question, with six protons, six neutrons, and six electrons, is a carbon atom. In atomic mass units, protons and neutrons each have a mass of approximately 1. Therefore, the approximate atomic mass of this atom, given that electrons contribute minimally to atomic mass due to their very small size, is 12 (6 protons + 6 neutrons = 12). This is also known as the atomic mass number.
Learn more about Atomic Mass here:https://brainly.com/question/32442642
#SPJ3
The intrinsic solubility of sulfathiazole, an old antimicrobial, is 0.002 mol/l. it is a weak acid and its pka is 7.12. what is the ph of the saturated solution of sulfathiazole in pure water?
The formula we will use is:
pH = 0.5 (pKa – log C)
where C is the concentration of sulfathiazole in molarity or mol / L
Since all values are given, we can compute directly for pH:
pH = 0.5 (7.12 – log 0.002)
pH = 4.91
Enthalpy change depends on the rate at which a substance is heated or cooled true or false
Is pizza a element compound homogeneous mixture or heterogeneous mixture?
Pizza is a heterogeneous mixture because the different components are not evenly distributed throughout the mixture.
Pizza is a heterogeneous mixture. A heterogeneous mixture is a mixture in which the components are not evenly distributed throughout the mixture. This means that the different components of pizza, such as the sauce, cheese, and toppings, can be easily distinguished from each other.
Pizza is not an element, because an element is a pure substance that cannot be broken down into simpler substances by chemical means. Pizza is also not a compound, because a compound is a substance that is made up of two or more elements that are chemically bonded together.
The components of pizza are not chemically bonded together, so they can be easily separated. For example, the cheese can be removed from the pizza, and the sauce can be removed from the pizza. This shows that pizza is a heterogeneous mixture.
To know more about heterogeneous mixture here
https://brainly.com/question/24898889
#SPJ6
Is mixing sodium chloride and silver nitrate a chemical or physical change?
The basic principle in balancing a chemical equation is to ______. hints
Answer is: obey the Law of conservation of mass.
For example, balanced chemical reaction:
Pb(NO₃)₂(aq) + Li₂SO₄(aq) → PbSO₄(s) + 2LiNO₃(aq).
According to principle of mass conservation, number of atoms must be equal on both side of balanced chemical reaction.
There are two lithium atoms, one lead atom, one sulfur atom, ten oxygen atoms and two nitrogen atoms on both side of reaction.