When DNA is replicated, it is necessary for the two strands to "unzip" temporarily. Choose which bonding type is most appropriate for holding the strands together in this way.
A) ionic bonding
B) hydrogen bonding
C) non-polar covalent bonding D) polar covalent bonding

Answer:

The binding energy present in the atomic nucleus that holds the protons and the neutrons together and its magnitude is one million times stronger than the electron binding energy in small atoms

Explanation:

The minimum required force to dismember an atomic nucleus into its constituent components, of protons and nucleus (collectively called nucleons) in known as the nuclear binding energy.

Energy is required in separating the nucleons hence the binding energy of a nucleus is always positive

According to Einstein's Energy and light relation E = mc², when a nucleus is formed from the number of free protons and neutrons, the sum of their individual masses is more than the mass of the formed atomic nucleus. The mass deficit of the neutron, also known as the 'missing mass' or mass defect indicates the amount of energy released in forming of the nucleus which therefore has different characteristics from its constituents as mentioned above

The amount of mass that is equivalent to the binding energy of the nucleus as shown in the Einstein's equation (E=mc²) is represented by the missing mass or mass defect of the formed nucleus or the difference in mass between the nuclear mass and that of the sum of the individual masses of its constituent protons and neutrons

Answer : The density of iron is, 7.8 g/mL

Explanation : Given,

Mass of iron = 4.7 g

Volume of water = 27.10 mL

Volume of water and iron = 27.70 mL

First we have to calculate the volume of iron.

Volume of iron = Volume of water and iron - Volume of water

Volume of iron = 27.70 mL - 27.10 mL

Volume of iron = 0.6 mL

Now we have to calculate the density of iron.

[tex]\text{Density of iron}=\frac{\text{Mass of iron}}{\text{Volume of iron}}[/tex]

Now put all the given values in this expression, we get:

[tex]\text{Density of iron}=\frac{4.7g}{0.6mL}[/tex]

[tex]\text{Density of iron}=7.8g/mL[/tex]

Thus, the density of iron is, 7.8 g/mL

The question is incomplete, here is the complete question:

A 50.60 mL sample of an ammonia solution is analyzed by titration with HCl. The reaction is given below.

[tex]NH_3(aq.)+H^+(aq.)\rightarrow NH_4^+(aq.)[/tex]

It took 38.33 mL of 0.0944 M HCl to titrate (react completely with) the ammonia. What is the concentration of the original ammonia solution?

Answer: The concentration of original ammonia solution is 0.0715 M

Explanation:

To calculate the concentration of base, we use the equation given by neutralization reaction:

[tex]n_1M_1V_1=n_2M_2V_2[/tex]

where,

[tex]n_1,M_1\text{ and }V_1[/tex] are the n-factor, molarity and volume of acid which is HCl

[tex]n_2,M_2\text{ and }V_2[/tex] are the n-factor, molarity and volume of base which is [tex]NH_3[/tex]

We are given:

[tex]n_1=1\\M_1=0.0944M\\V_1=38.33mL\\n_2=1\\M_2=?M\\V_2=50.60mL[/tex]

Putting values in above equation, we get:

[tex]1\times 0.0944\times 38.33=1\times M_2\times 50.60\\\\M_2=\frac{1\times 0.0944\times 38.33}{1\times 50.60}=0.0715M[/tex]

Hence, the concentration of original ammonia solution is 0.0715 M

Answer:

person’s velocity at this point = 1.535m/s

Explanation:

The detailed steps and appropriate substitution is as shown in the attachment.

Answer:

The molar solubility of nitrogen gas is [tex]1.32\times 10^{-3}mol/L[/tex].

Explanation:

Henry's law states that the amount of gas dissolved or molar solubility of gas is directly proportional to the partial pressure of the liquid.

To calculate the molar solubility, we use the equation given by Henry's law, which is:

[tex]C_{N_2}=K_H\times p_{liquid}[/tex]

where,

[tex]K_H[/tex] = Henry's constant = [tex]6.26\times 10^{-4}mol/L.atm[/tex]

[tex]p_{N_2}[/tex] = partial pressure of nitrogen gas

Total air pressure = P = 2.71 atm

Percentage of nitrogen in air = 78.09%

Mole fraction of nitrogen ,[tex]\hi_{N_2}= 0.7809[/tex]

[tex]p_{N_2}=P\times \chi_{N_2}=2.71 atm\times 0.7809[/tex]

Putting values in above equation, we get:

[tex]C_{N_2}=6.26\times 10^{-4}mol/L.atm\times 2.71 atm\times 0.7809\\\\C_{N_2}=1.32\times 10^{-3}mol/L[/tex]

Hence, the molar solubility of nitrogen gas is [tex]1.32\times 10^{-3}mol/L[/tex].

The solubility of N₂ in a diver's blood at 2.71 atm pressure and 25.0 C temperature is calculated using Henry's law to be 1.323 x 10⁻³ mol/L, assuming a mole fraction of N₂ of 0.78.

The solubility of N₂ in a diver's blood at a total air pressure of 2.71 atm and a temperature of 25.0 C can be determined using Henry's law, which states that the solubility of a gas in a liquid is directly proportional to the partial pressure of that gas above the liquid. In this case, the Henry's law constant k for N₂ is given as 6.26 x 10⁻⁴ mol/(L·atm).

Assuming the composition of the air is the same as on land with a mole fraction of N₂ being 0.78 (from the given standard composition of dry air), the partial pressure of N₂ is 0.78 x 2.71 atm = 2.1138 atm. Applying Henry's law:

Solubility = k × (partial pressure of N₂)

Solubility = 6.26 x 10⁻⁴ mol/(L·atm) × 2.1138 atm

Solubility = 1.323 x 10-3 mol/L

Therefore, the solubility of N₂ in the diver's blood at the given conditions is 1.323 x 10⁻³ mol/L.

Answer:

Mass number is defined as the number of protons plus the number of neutrons.

Explanation:

Every atom of an element have proton(s), neutron(s) and electron(s). The proton number of an element is the atomic number of that element. For an electronically neutral atom the proton number is equal to the electron numbers. The neutron and the proton contributes to the mass of every atom. The electron is more active when atoms are bonding.

Mass number of an element is the number of proton plus the number of neutron.  

Atomic number of an atom is the number of proton present, so it can never be atomic number.

Isotopy talks about same element having different number of neutron but same number of protons in each atom.  Example is hydrogen that exist as protium, deuterium and tritium. It cannot be isotopic number.

Ionic number talks about elements that possess a charge. The elements have been ionized.

The answer is Mass number because the sum of proton number and neutron number is equals to mass number.

Mass number is defined as the number of protons plus the number of neutrons in an atom's nucleus. Atomic number is defined as the number of protons in an atom's nucleus.

For more such questions on  protons

https://brainly.com/question/1481324

#SPJ3

Answer:

HgBr2 conducts when molten because there are mobile ions in molten HgBr which allows flow of current when an electrical potential difference is introduced to the HgBr in molten state

However  HgBr2 does not conduct in the solid state as the ions are fixed in the solid HgBr2 lattice structure

Mercury, which is a metal in its natural form conducts both in the solid and molten states as the delocalized electrons are able to move both in the solid and molten mercury states and as such current flows through mercury when there is an electrical potential difference placed across it

Explanation:

Electricity or electric current flow is the term used to describe the state of movement or flow of matter that carries an electrical charge

It is the steady movement of or flow of electrons. The moving electrons transfer electrical charge round an electrical circuit. In metals, there are freely shared electrons between individual atoms so as to efficiently conduct electricity and so when an electrical potential difference is placed across a piece of  metallic object an electron is readily displaced by another electron entering from one end and exiting from the other end of the electrical potential difference

Mercury bromide and mercury exhibit electrical conductivity in both solid and molten states due to the presence of freely mobile, charged entities. In the solid state, ionic compounds like mercury bromide are not conductive, but they become conductive when molten.

In both the solid and molten states, mercury bromide and mercury demonstrate electrical conductivity due to the presence of freely mobile, charged entities. In the solid state, ionic compounds like mercury bromide are not electrically conductive because their ions are unable to flow. However, in the molten state, the ions are able to move freely through the liquid, allowing for electrical conductivity.

https://brainly.com/question/31668005

#SPJ11

Answer:

                   Option-4 (3:2) is the correct answer.

Explanation:

Following steps are taken to balance the given unbalanced chemical equation.

Step 1: Write the unbalanced chemical equation,

                         N₂ +  H₂ →  NH₃

Step 2: Balance Nitrogen Atoms;

There are 2 nitrogen atoms on left hand side and 1 nitrogen atoms on right hand site therefore, to balance them multiply NH₃ on right hand side by 2 i.e.

                         N₂ +  H₂ →  2 NH₃

Step 3: Balance Hydrogen Atoms;

Now, there are 2 hydrogen atoms on left hand side and 6 hydrogen atom on right hand site therefore, to balance them multiply H₂ on left hand side by 3 i.e.

                         N₂ +  3 H₂ →  2 NH₃

Now, the equation is balanced.

Step 4: Finding out mole ratios:

From balanced chemical equation it can be concluded that 3 moles of H₂ are involved in producing 2 moles of NH₃ hence, the mole ratio of consumption of H₂ to production of NH₃ is 3:2.

Answer:

4) 3:2

Explanation:

Castle learning

Dont mind the tiny tab

Answer:The moon will recoil at 1.019×10^-6m/s

Explanation:To determine the recoil velocity of the moon after the inelastic collisions

Given:

Mass of moon=7.36×10^22kg=m1

Mass of asteroids = 5×10^12=m2

Initial velocity of moon =0

Initial velocity of asteroids =15km/s=15000m/s

The law of conservation of momentum is given as

M1v1 + m2v2 =(m1+m2)v'

O + m2v2= (m1 +m2)v'

V'=m2v2/(m1+m2)

V'=(5×10^22)×15000/(7.36×10^22)+(5×10^12)

V'=1.019×10^-6m/s

Answer:

The moon will recoil at the speed of 1.019×10^-6 m/s the whole mass

Explanation:

Mass of moon=7.36×10^22kg=m1

Mass of asteroids = 5×10^12=m2

Initial velocity of moon =0

Initial velocity of asteroids =15km/s=15000m/s

The law of conservation of momentum is given as

M1v1 + m2v2 =(m1+m2)v'

0 + m2v2= (m1 +m2)v'

V'=m2v2/(m1+m2)

V'=(5×10^22)×15000/(7.36×10^22)+(5×10^12)

V'=1.019×10^-6m/s

Please find the attached picture to get the full explanation.

I hope these helps, kindly give brainliest if it does

Answer:

The climate of Boston is so different from the climate of Barcelona because regional climate does not depend only on latitude.  The flow of ocean current and its temperature causes this different climates. East coast cities such as Boston have a continental climate because prevailing westerly winds continually bring them under the influence of continental air masses while westerlies bring maritime air masses and therefore a maritime climate to the coast cities such as Barcelona and others.

Answer:

The answer to your question is Gallium-71 = 70.9202 amu

Explanation:

Gallium atomic weight = 69.7

Gallium-69 = 68.9 amu    abundance = 60.4%

Gallium-71 =     x                abundance = 39.6%  

To solve this problem just write an equation and solve it for the mass of gallium-71.

Equation

Gallium = Gallium-69(abundance) + Gallium-71(abundance)

Substitution

69.7 = (68.9)(0.604) + Gallium-71(0.396)

69.7 = 41.6156 + Gallium-71(0.396)

Gallium-71(0.396) = 69.7 - 41.6156

Gallium-71(0.396) = 28.0844

Gallium-71 = 28.0844/0.396

Gallium-71 = 70.9202 amu

Explanation:

(a)   The given data is as follows.

           M = 1100 kg,        r = 5.01 mm = [tex]5.01 \times 10^{-3}[/tex] m

          m = 2.40 kg

Now, formula for Newton's law of gravitation is as follows.

                 F = [tex]\frac{GMm}{r^{2}}[/tex]

Putting the given values into the above formula as follows.

               F = [tex]\frac{GMm}{r^{2}}[/tex]

                  = [tex]\frac{6.673 \times 10^{-11} Nm^{2}/kg^{2} \times 1100 \times 2.40 kg}{(5.01 \times 10^{-3})^{2}}[/tex]  

                  = [tex]7.02 \times 10^{-3}[/tex] N

Therefore, gravitational force exerted by the given sphere on 2.40 kg point mass is [tex]7.02 \times 10^{-3}[/tex] N.

(b) Now, mass of the sphere beyond r = 2.50 mm or [tex]2.50 \times 10^{-3} m[/tex] will not contribute any force on the point mass.

Hence, mass within the radius r < R that experiences force is,

                 [tex]m^{1} = M \frac{r^{3}}{R^{3}}[/tex]

According to Newton's law of gravitation,

           F = [tex]\frac{Gm^{1}m}{r^{2}}[/tex]

             = [tex]\frac{Gm(M \frac{r^{3}}{R^{3}})}{r^{2}}[/tex]

             = [tex]G \frac{mMr}{R^{3}}[/tex]

Here, r is the radius of point mass and R is the radius of solid sphere.

Therefore, putting the given values into the above formula as follows.

           F = [tex]G \frac{mMr}{R^{3}}[/tex]

              = [tex]\frac{6.673 \times 10^{-11} Nm^{2}/kg^{2} \times 1100 kg \times 2.40 kg \times 2.50 \times 10^{-3}}{(5)^{3}}[/tex]

              = [tex]3.52 \times 10^{-9}[/tex] N

Therefore, the gravitational force this sphere exerts on a 2.40 kg is [tex]3.52 \times 10^{-9}[/tex] N.

Answer:

Which sequence of events is required to form a limestone cave where you can walk around and observe cave formations, such as stalactites? (Note: stalactites hang from the ceiling - they have to hold on tight to the roof.)

A geological sequence of events as involving the lowering of the water table to expose cave structures where stalactites and stalagmites form which is described as follows,

Explanation:

1. Acidic percolated water formed cavities of solution beneath the natural water table known as phreatic zone

2. After the passage of time there is a drop in the water table dropped forming caves from cavities

3. These caves, which are air filled voids that contains adequate environment for forming stalactites and stalagmites and where they are found

Answer:

The activity consists on:

1. Lab activity

Your lab activity ends.

2. Plot a graph volume vs temperature (in kelvins) with the two data points that resulted from your experiment:

a) First convert the temperatures in ºC to kelvins:

[tex]Kelvin=\ºC+273.15[/tex]

[tex]T_1=23\ºC+273.15=296.15[/tex]

[tex]T_2=80\ºC+273.15=353.15[/tex]

b) Your points, now, are: (296.15, 2) and (353.15, 2.4)

c) Prepare your graph paper

d) Place the two points (296, 2) and (353, 2.4) at the best your graph paper lets you.

d) Draw a straight line that joins the two points and cross both the vertical and the horizontal axis.

e) Read the point at which the line intercepts the horizontal axis. This is the x-intercept, and is the where the volume would be zero. The temperature cannot be lower, because the volume cannot be negative.

3. Compare your results to those expected.

According to Charle's Law at a fixed pressure, the amount of the given gas will be undeviatingly proportional to the temperature.

In this situation when the pressure is a fixed number then it is said to isobaric condition.

Lab Activity:

Plotting of the graph:

1. To plot the graph between the temperature (kelvins) and the volume, we need to convert the temperature from C to kelvins.

[tex]\text{Kelvin} & = \text{C}^{\text{o}} + 273.15[/tex]

[tex]\text{T1} & = \text{30}^{\text{o}} + 273.15 = 303.15[/tex]

[tex]\text{T2} & = \text{87}^{\text{o}} + 273.15 = 360.15[/tex]

2. The coordinates we get for graphs now are:

(303, 2) and (360, 2.4)

3. Plot the above data on the graph paper.

See the attached image for the graph below.

4. Comparing the recorded results with the expected data: Compare the data on basis of errors, and imprecisions.

To learn more about Volume vs temperature graph refer to the link:

https://brainly.com/question/1305110

Answer: The given statement is true.

Explanation:

Boiling point is defined as the point at which vapor pressure of a substance becomes equal to atmospheric pressure. During this point, the liquid changes into vapor state and temperature remains constant till all the liquid changes into vapor state.

Vapor pressure is defined as the pressure exerted by vapors or gas on the surface of a liquid.

Thus, we can conclude that the statement if the vapor pressure of a liquid is less than the atmospheric pressure, the liquid will not boil, is true.

Answer:

The net charge of 1.3 g nugget of pure gold after 1.68% of its electrons are removed is 559 C

Explanation:

When an atom gains electrons it becomes negatively charged. Conversely, when it looses electrons the atoms becomes positively charged thus

To solve this question, we rely on the relationship between the nmber of particles present in a given mass of an atom, Avogadro's number and number of moles, n

The given variables are

mass of pure gold nugget = 1.30 g

Quantity of electrons removed = 1.68% of electrons present in the gold sample

Molar mass of gold = 197 g/mol

Avogadro's number = 6.02 × 10²³ atoms/mole  

qc = one electron charge = -1.06 × 10⁻¹⁹ C/electron

Electrical charge of gold nugget = 0 C

Number of electrons in one gold atom = 79 electrons

Solving for the number of prticles or gold atoms in 1.3 grams of gold we get

n mass/(molar mass) = 1.3/197 moles of gold =  0.0066 moles

number of particles in 0.0066 moles of gold N = n×[tex]N_{A}[/tex] = 0.0066 × 6.02 × 10²³  = 3.97 × 10²¹ atoms

since 79 electrons are present per particle we have

3.97 × 10²¹ × 79 = 3.14 × 10²³ electrons

quantity of elecrtrons removed = 1.68% of  3.14 × 10²³ electrons =1.68/100 × 3.14 × 10²³ electrons = 0.0168 × 3.14 × 10²³ electrons = 5.3 × 10²¹ electrons

The net charge of 5.3 × 10²¹ electrons = 5.3 × 10²¹ electrons × -1.06 × 10⁻¹⁹ C/electron =

5.59 × 10² C = 559 C

Final answer:

After 1.68% of its electrons are removed, a 1.30 g nugget of pure gold will have a net positive charge of approximately +842 C, calculated based on the initial number of electrons and the charge per electron.

Explanation:

To calculate the net charge of a 1.30 g nugget of pure gold after 1.68% of its electrons are removed, we first need to understand the composition and characteristics of gold. The atomic mass of gold (Au) is approximately 197 g/mol, and each atom has 79 protons and, when neutral, 79 electrons. The number of gold atoms in the nugget can be calculated using its mass and the atomic mass of gold.

First, calculate the number of moles of gold in the nugget:
Moles of gold =
(1.30 g) / (197 g/mol) = 0.0066 mol. The number of gold atoms = 0.0066 mol ×
(6.022 × 1023 atoms/mol) ≈ 3.97 × 1021 atoms. Since each gold atom has 79 electrons when neutral, the total number of electrons initially is approximately 3.13 × 1023 electrons.

To find out how many electrons 1.68% represents:
1.68% of the total electrons = 1.68 / 100 × 3.13 × 1023 ≈ 5.26 × 1021 electrons.

The charge of one electron is approximately -1.6 × 10-19 C. Therefore, removing 5.26 × 1021 electrons means the nugget would have a net positive charge equal to:
5.26 × 1021 × 1.6 × 10-19 C ≈ 8.42 × 102 C. Thus, the net charge of the gold nugget after removing 1.68% of its electrons would be approximately +842 C.

Answer:

1.5e+8 atoms of Bismuth.

Explanation:

We need to calculate the ratio of the diameter of a biscuit respect to the diameter of the atom of bismuth (Bi):

[tex] \\ \frac{diameter\;biscuit}{diameter\;atom(Bi)}[/tex]

For this, it is necessary to know the values in meters for any of these diameters:

[tex] \\ 1m = 10^{3}mm = 1e+3mm[/tex]

[tex] \\ 1m = 10^{12}pm = 1e+12pm[/tex]

Having all this information, we can proceed to calculate the diameters for the biscuit and the atom in meters.

1 atom of Bismuth = 320pm in diameter.

[tex] \\ 320pm*\frac{1m}{10^{12}pm} = 3.20*10^{-10}m[/tex]

[tex] \\ 51mm*\frac{1}{10^{3}mm} = 51*10^{-3}m = 5.1*10^{-2}m [/tex]

How many times is the diameter of an atom of Bismuth contained in the diameter of the biscuit? The answer is the ratio described above, that is, the ratio of the diameter of the biscuit respect to the diameter of the atom of Bismuth:

[tex] \\ Ratio_{\frac{biscuit}{atom}}= \frac{5.1*10^{-2}m}{3.20*10^{-10}m}[/tex]

[tex] \\ Ratio_{\frac{biscuit}{atom}}= \frac{5.1}{3.20}\frac{10^{-2}}{10^{-10}}\frac{m}{m}[/tex]

[tex] \\ Ratio_{\frac{biscuit}{atom}}= \frac{5.1}{3.20}\frac{10^{-2}}{10^{-10}}\frac{m}{m}[/tex]

[tex] \\ Ratio_{\frac{biscuit}{atom}}= 1.5*10^{-2+10}[/tex]

[tex] \\ Ratio_{\frac{biscuit}{atom}}= 1.5*10^{8}=1.5e+8[/tex]

In other words, there are 1.5e+8 diameters of atoms of Bismuth in the diameter of the biscuit in question or simply, it is needed to put 1.5e+8 atoms of Bismuth to span the diameter of a biscuit in a line.

Answer:

productivity and water depth

Explanation:

The productivity and the depth of water are both equally important as it directly affects the accumulation of biogenic sediments such as the siliceous ooze and calcareous ooze. In the equator and the coastal upwelling areas, and at the site of divergence of oceans, there occurs a high rate and amount of productivity, and these are considered to be the primary productivity.  

The siliceous oozes are a good indicator of extensively high productivity in comparison to the carbonate oozes. The main reason behind this is that the silica can be easily dissolved in the surface water. On the other hand, the carbonates dissolve at a relatively lower ocean water depth, so there requires a high amount of surface productivity in order to allow these siliceous oozes to reach the ocean bottom.

Thus, the water depth and productivity, both are considered as the limiting factor in determining the accumulation of biogenic oozes.

Answer:

The equation for this reaction is:

2Al(OH)3 (aq) + 3H2SO4 (l) ---> Al2(SO4)3 (s) + 6H2O (l)

Explanation:

Answer:

2 µs

Explanation:

The surface area expressed in square feet of a single face of a pile is 1.45 square feet.

Explanation:

The dimensions of the pillar are given as 14 in [tex]\times[/tex] 14 in

(1 feet = 12 inch)

According to the pillar dimensions mentioned in the problem, the length of the pillar should be 15 inches, height by 14 inches and the width by 14 inches.

There will be two surface areas of the concrete pile, one implies side surface area and the other is end surface area.

For calculating the side surface area,

Area of the side surface = 14 in [tex]\times[/tex] 15 in

                                         = [tex]14 in.[/tex] [tex]\times[/tex]  [tex]\frac{1 ft.}{12 in.}[/tex]

                                         = 1.16 [tex]\times[/tex] 1.25

                                         = 1.45 square feet.

(In the given question, only a single face is asked so there is no need to find the surface area of the end face.)

The surface area of the side face of the given pile is 1.45 ft². The surface area is the area of all surfaces in a 3D object such as a pillar, ball, etc.

The surface area is the area of all surfaces in a 3D object such as a pillar, ball, etc.

A pillar has two types of faces, side face and end phase with dimensions 14x14 and 14x15.

The dimentions of the pile,

Length - 14 inches = 1.16  ft

Width - 14 inches = 1.16  ft

height - 15 inches = 1.25 ft.

So, the surface area of a side face will be

As = 1.16  ft x  1.25 ft

As = 1.45 ft²

Therefore, the surface area of the side face of the given pile is 1.45 ft².

Learn more about the Surface area:

https://brainly.com/question/24720806

Answer: The weight of water bed in pounds is 1850.16 lb

Explanation:

To calculate the volume of cuboid, we use the equation:

[tex]V=lbh[/tex]

where,

V = volume of cuboid

l = length of cuboid = 210 cm

b = breadth of cuboid = 160 cm

h = height of cuboid = 25 cm

Putting values in above equation, we get:

[tex]V=210\times 160\times 25=8.4\times 10^5cm^3=29.65ft^3[/tex]      (Conversion factor:  [tex]1cm^3=3.53\times 10^{-5}ft^3[/tex] )

To calculate the mass of waterbed, we use the equation:

[tex]\text{Density of substance}=\frac{\text{Mass of substance}}{\text{Volume of substance}}[/tex]

Density of waterbed = [tex]62.4lb/ft^3[/tex]

Volume of waterbed = [tex]29.65ft^3[/tex]

Putting values in above equation, we get:

[tex]62.4lb/ft^3=\frac{\text{Mass of waterbed}}{29.65ft^3}\\\\\text{Mass of waterbed}=(62.4lb/ft^3\times 29.65ft^3)=1850.16lb[/tex]

Hence, the weight of water bed in pounds is 1850.16 lb

Answer:

-k slope

The term No is the y intercept(does not mean NO) y-intercept

Explanation:

For a straight line graph, the normal equation could be written as

y = mx + c

Where m is the slope and c is the y intercept.

Writing the equation is the form of y = mx + c gives the following;

lnN = -kt + No

As obtained from the question, t is plotted in the x-axis, while lnN is the plot on the y-axis.

Now, we are asked to obtain the slope and the y-intercept. It can be seen that the slope is the coefficient of the term x in this case t. Hence, our slope is -k.

The y-intercept is the other term which in this case is No

Answer:

d. Hydrophobic molecules are attracted to each other.

Explanation:

The term “hydrophobic effect” is associated with the spontaneous tendency of macromolecules, such as proteins, to prefer a conformation in an aqueous medium, with hydrophobic groups facing the interior of the mac romolecule, favoring attractive intramolecular interactions, and hydrophilic groups exposed on the surface, for maximize interactions with water molecules in the medium. This is because the hydrophobic molecules are attracted to each other, allowing them to turn inward.

Answer:

Endpoint is point in which indicator change the color, and equivalence point is point in which there is equal amount of two chemicals. Endpoint is after Equivalence point.

Explanation:

To know the end point we use phenolphthalein as indicator. Therefore, endpoint is point in which indicator change the color, and equivalence point is point in which there is equal amount of two chemicals.

Titration is a technique by which we know the concentration of unknown solution using titration of this solution with solution whose concentration is known. To know the end point we use phenolphthalein as indicator. End point is a point where completion of reaction happen.

Endpoint is point in which indicator change the color, and equivalence point is point in which there is equal amount of two chemicals. Endpoint is after Equivalence point.

Therefore, endpoint is point in which indicator change the color, and equivalence point is point in which there is equal amount of two chemicals.

To know more about titration, here:

https://brainly.com/question/13307013

#SPJ2

Answer: solution

Explanation:

Greenhouse gases trap energy in the atmosphere.

Explanation:

Greenhouses gases trap the radiation, especially long infrared wavelengths, that emanate from the earth's surface after solar radiation hits the earth’s surface.  These infrared wavelengths are electromagnetic radiation that are significant in heat transfer. Mostly a higher percentage of this radiation from the earth’s surface escapes into space. Trapping this radiation in the atmosphere causes warming of the atmosphere - a phenomenon called greenhouse effect. This is why an increase in greenhouse gases causes an increase in global temperatures and subsequently drives climate change.

Learn More;

For more on greenhouse effect check out;

https://brainly.com/question/12615716

https://brainly.com/question/11812392

#LearnWithBrainly

Answer: C₃H₈

Explanation:

From PV = nRT

Moles of CO2 = PV / RT =(1 x 1.037)/(0.08206 x ( 273+98.3)) = 0.0340 moles of CO2

CxHy + (x + (y/2))O₂ ----> xCO₂ + yH₂O

there is 1 mole of C in each mole of CO2 so moles of C in CO₂ = 0.0340 moles

mass of C in CO₂ = 0.0340 x 12 = 0.41 g

This means mass of C in the hydrocarbon = 0.41g

so mass of H in the hydrocarbon = 0.50 - 0.41= 0.09 g

moles of H in the hydrocarbon = mass/molar mass = 0.09/1 = 0.09 moles

molar ratio of C:H = 0.034 : 0.09 = 1 :2.67

or 3 :8

empirical formula is C3H8

To find the empirical formula of the hydrocarbon, calculate the moles of carbon dioxide produced using the ideal gas law and the moles of carbon and hydrogen in the hydrocarbon. The empirical formula is C12H1.

In order to determine the empirical formula of the hydrocarbon, we need to find the mole ratio of carbon to hydrogen in the compound. To do this, we first calculate the moles of carbon dioxide (CO2) produced using the ideal gas law:

n = (PV)/(RT) = (1.000 atm)(1.037 L)/(0.08206 L.atm/mol.K)(98.3 + 273.15 K) = 0.0443 mol

Since the combustion of 1 mole of hydrocarbon produces 1 mole of CO2, we can conclude that the moles of hydrocarbon consumed is also 0.0443 mol. Next, we calculate the moles of carbon and hydrogen in the hydrocarbon:

moles of carbon = (mass of carbon in hydrocarbon) / (molar mass of carbon) = (12.01 g/mol)(0.5000 g) / (1 g) = 6.003 mol

moles of hydrogen = (mass of hydrogen in hydrocarbon) / (molar mass of hydrogen) = (1.008 g/mol)(0.5000 g) / (1 g) = 0.5008 mol

The empirical formula of the hydrocarbon is then C6H0.5008. We can simplify this ratio by multiplying all the subscripts by 2 (the smallest whole number ratio) to get the empirical formula: C12H1.

https://brainly.com/question/32125056

#SPJ3

Answer:

The given statement is false.

Explanation:

Endothermic reactions are defined as the reactions in which energy of products is more than the energy of the reactants. In these reactions, energy is absorbed by the system.

The total enthalpy of the reaction [tex](\Delta H)[/tex] comes out to be positive.

Exothermic reactions are defined as the reactions in which energy of reactants is more than the energy of the products. In these reactions, energy is released by the system.

The total enthalpy of the reaction [tex](\Delta H)[/tex] comes out to be negative.

Answer:

2,347.8 grams

Explanation:

The freezing point depression Kf of water = 1.86° C / molal.

To still freeze at -12° C, then the molality of the solution 12/ 1.86 = 6.45 moles

The molecular weight of sorbitol (C6H14O6)is:

6 C = 6 ×12 = 72

14 H = 14 × 1 = 14

6 O = 6 × 16 = 96

...giving a total of 182

 So one mole of sorbitol has a mass of 182 grams.

Since there are 2 kg of water,  2 × 6.45 moles = 12.9 moles can be added to the water to get the 12° C freezing point depression. 

Therefore

grams = moles × molar mass

12.9 moles × 182 grams / mole = 2,347.8 grams of sorbitol can be added and still freeze