What type of thunderstorm is depicted in the radar illustration above?

A. Multicell line
B. Tornado
C. Single-cell thunderstorm
D. Supercell

B: is not correct, pick from A,C, or D. Please try to give a good answer and not a guess.

What Type Of Thunderstorm Is Depicted In The Radar Illustration Above? A. Multicell Line B. Tornado C.

Answers

Answer 1

Answer:

super cell thunder storm

Answer 2

The type of thunderstorm depicted in the radar illustration is a super-cell thunderstorm.

Supercell thunderstorm rotates updraft:

A supercell thunderstorm is a type of thunderstorm that is deep and rotates updraft. It is also known as a rotating thunderstorm. They are most dangerous. The four types of super cell thunderstorms include classic, high precipitation, low precipitation, and miniature.

So, the thunderstorm shown in the image is a supercell thunderstorm.

To learn more:- https://brainly.com/question/14347402

#SPJ2


Related Questions

During the last century, human impacts on our
planet have led to an increasing and alarming loss of
biodiversity in rainforest ecosystems. Scientists
estimate the current extinction rates exceed those of
some prehistoric mass extinction is, This loss of
biodiversity also means loss of genetic diversity and
loss of ecosystems. What could be done to minimize
this loss of biodiversity?

A. Introduce new species to rainforest
ase
ecosystems.

B. Write and pass new environmental protection
laws specific to rainforest ecosystems.

C. Build barriers around rainforest ecosystems to
keep animals and plants contained.

D. Move all rainforest animals to new ecosystems
where they will be safe.

Answers

Answer:

I would say B.

Explanation:

A would only fix biodiversity temporarily, until humans come and wipe them out again. C is just kind of impossible, and containing them could also be problematic. D is also unreasonable, and some animals would not be able to thrive in new ecosystems. B would help save the environment, which would save the animals, which would help biodiversity.

Final answer:

To minimize the loss of biodiversity in rainforest ecosystems, it is important to implement several measures including conserving and protecting existing rainforest habitats, restoring degraded areas, and raising awareness about the importance of biodiversity conservation.

Explanation:

To minimize the loss of biodiversity in rainforest ecosystems, it is important to implement several measures. First, it is crucial to conserve and protect existing rainforest habitats by designating them as protected areas and wildlife reserves. This can be achieved through the establishment of new environmental protection laws specific to rainforest ecosystems. Secondly, efforts should be made to restore degraded rainforest areas by replanting native species and rehabilitating ecosystems. Finally, educating and raising awareness among local communities and the general public about the importance of biodiversity conservation and sustainable practices can go a long way in minimizing the loss of biodiversity.

Learn more about Minimizing loss of biodiversity in rainforest ecosystems here:

https://brainly.com/question/34613914

#SPJ2

Which type of worm has a body that is divided into many ring-like parts?


roundworms


segmented worms


flatworms


feather-duster worms

Answers

Answer:

segmented worms

Explanation:

Segmented worms are the most complex animals with worm-like body plans.

Final answer:

The segmented worm is the type with a body divided into ring-like parts, and they belong to the phylum Annelida, with earthworms as common examples.

Explanation:

The type of worm that has a body divided into many ring-like parts is the segmented worm. Segmented worms are part of the phylum Annelida, which includes earthworms, leeches, and some marine worms. These worms have bodies that are segmented, meaning their bodies are separated into repeating units. Earthworms are common examples of segmented worms, and they play a critical role in enriching and aerating the soil, supporting terrestrial ecosystems. Additionally, segmented worms typically have well-developed organ systems, with a complete digestive tract, a fluid-filled cavity that acts as a hydroskeleton, and a more developed nervous system compared to other worm types like roundworms and

Which is not a method used in genetic engineering?

A gene is removed.


A gene is inserted to make a mutation inactive.


A synthetic gene is created.

Answers

Answer:

A. A gene is removed

Explanation:

Answer: Third option is correct.

Explanation:

Genetic engineering is a method of artificial manipulation, modifications and recombination of genes to modify the population of any organisms.

In this type pf engineering, genes get inserted to make a mutation inactive or a gene is removed.

But no synthetic gene is created by this process.

Hence, third option is correct.

Which of these is an environmental effect on deforestation?

A. Temperature Decrease

B. Poisoning Wildlife

C. Soil Erosion

D. Water Temperature Increase

Answers

That would be C. Soil erosion. Deforestation means the destruction of trees, and trees have roots, roots which hold the ground in place, so when the wind blows, or water rushes thru it, it doesn't wash away. When trees get cut down, the roots die, and nothing is there to hold the soil down, so It washes away. Hope this helps!

Option C

Soil Erosion

why don't all organisms become fossils when they die?

Answers

Answer:

Oxygen...

Explanation:

Organisms decompose more quickly when they are in contact with oxygen. ... When an organism is buried quickly, there is less decay and the better the chance for it to be preserved. The hard parts of organisms, such as bones, shells, and teeth have a better chance of becoming fossils than do softer parts.

Final answer:

Organisms do not always become fossils due to the specific and uncommon conditions required for fossilization, such as rapid burial in sediments or extraordinary preservation environments. The fossil record is thus incomplete, capturing only a fraction of past life forms under certain conditions.

Explanation:

Not all organisms become fossils when they die because the conditions required for fossilization are quite specific and rarely occur. Remains must be rapidly covered by sediments or preserved in unique circumstances such as being frozen in glaciers or trapped in tree resin. The environment plays a crucial role in preserving fossils, with physical conditions like temperature and water depth, and chemical conditions such as pH and oxygen levels greatly influencing this process. Organisms that do not get preserved in such a way eventually decompose fully.

Fossils help paleontologists understand Earth's history, evolution, and paleoenvironments. They also indicate that most species that have lived on our planet are now extinct. Fossils are not only a window into the past, but they are also a finite non-renewable resource, as is the case with fossil fuels derived from ancient organisms that decomposed under specific anaerobic conditions over millions of years.

While most remains eventually deteriorate, under favorable conditions such as volcanic ash, limestone, and mineralized groundwater, fossilization can occur, although it remains a rare event. This results in an incomplete fossil record, as the conditions for preservation don't happen frequently enough to capture all past life forms.

In which situations is work being done?
Hannah leans against her locker, but it doesn’t move.
Andy’s car rolls down a hill with the engine off.
A wind turbine stands still on a sunny, windless day.
A balloon expands as it is heated by the Sun.
James pedals a stationary exercise cycle that doesn’t move.

Answers

Answer:

it would seem to be James because James is doing work by exercising all of the other situations look to be using no energy at all

Explanation:

Answer:

Andy’s car rolls down a hill with the engine off.

A balloon expands as it is heated by the Sun.

Explanation:

Work is said to be done when a force applied on an object is able to move/displaces the object from its position. But, if force is applied on an object but it does not move or force which is being applied on the object is prependicular to the object in such situations work done is zero.

The formula for work done is mentioned as under:

        W = F.d. cosФ

Where, W = Work done

            F  = Force applied

            d  = displacement

            Ф = angle between force and displacement

So if Ф = 90° then cosФ = 0 and hence, W = F.d. cosФ = F x d x 0 = zero &

W = F.d. cosФ = F x 0 x cosФ = zero, when d = 0.

Andy’s car rolls down a hill with the engine off -  In this situations work is said to be done because there is a net movement of the object in the direction of force.

A balloon expands as it is heated by the Sun - In this situation work is said to be done due to heat expansion.

Hannah leans against her locker, but it doesn’t move, a wind turbine stands still on a sunny, windless day & James pedals a stationary exercise cycle that doesn’t move - In all these situations, work done is zero because there is no net displacement. i.e. d = 0.

What happens when an antibody binds an antigen

Answers

Antibody–antigen complex: The forked end of an antibody recognises and binds to the antigen on the surface of the pathogen. The third and final line of defence is the immune response. The invading microbe or pathogen is called an antigen. It is regarded as a threat by the immune system and is capable of stimulating an immune response.

15. Which of the terrestrial planets is the largest?
O A. Venus
| 0 B. Earth
o C. Mars
O D. Mercury​

Answers

Hi!

Earth is the largest.

Hope this helps!

Final answer:

Earth is the largest of all the terrestrial planets, which include Mercury, Venus, Earth, and Mars. The correct answer is option A.

Explanation:

The question pertains to the relative sizes of the terrestrial planets in our solar system. Of all the terrestrial planets -- Mercury, Venus, Earth, and Mars -- Earth is the largest. When considering the question hint regarding weight and surface gravity, it's also notable that among the terrestrial planets (excluding the jovian planets), you would weigh the most on the surface of Earth due to its greater mass and consequently higher surface gravity compared to the other terrestrial planets.

How is mitosis different in plants and animals​

Answers

Instead of in humans ... cell development, plants and animals use mitosis for cell division

Answer:

Mitosis in plants:

The plants cells do not change the shape before the process of mitosis. Cytokinin is the main hormone in the mitotic division of plant cell. Asters are absent in plant cell. The cell plate method is involved in plant cell mitosis. Microfilaments are not involved majorly in plant cell division.

Mitosis in animals:

The animals cells  change the shape and become oval or rounded before the process of mitosis. Different number of hormone is involved in the mitotic division of animal cell. Asters are present in plant cell. The cell plate method is not involved in animal cell mitosis and division occurs through cleavage. Microfilaments are involved majorly in plant cell division.

Unlike a prokaryotic bacteria cell, a virus, like the one in the image, A) has a lipid cell wall. B) has no genetic material. C) cannot reproduce on its own. D) does not contain any organic molecules.

Answers

C) cannot reproduce on it's own.

Heres a few questions

Answers

Answer:

Don't know

Explanation:

The transfer of energy to a body by applying a force that causes the body to move in the direction of the force is called

Answers

Final answer:

The transfer of energy through force application causing a body to move in the direction of the force is defined as 'work' in physics. This concept is closely related to 'power', which is the rate of energy transfer in a system. It is an integral part of studies in mechanics and thermodynamics.

Explanation:

The transfer of energy to a body by applying a force that causes the body to move in the direction of the force is called work. This energy transfer occurs when an external force is applied to an object system, causing it to move through a distance. In terms of physics, work is the product of the force's component in the direction of the displacement and the magnitude of the displacement.

As an example, consider a piston filled with gas being compressed or expanded. The work done on the piston is equated to the energy transferred into the piston system. This concept is part of thermodynamics, a fundamental aspect of physics that studies the movements and interactions of energy.

Power is closely related to work, defined as the rate of energy transfer into, out of, or within a system. So, if we look at the power involved in moving a body, it can be expressed in terms of the forces acting on it. The higher the rate of work done, the greater the power exerted over the system.

Learn more about Work & Energy Transfer here:

https://brainly.com/question/1335097

#SPJ3

Elements such as nitrogen,carbon,and oxygen cannot be made or destroyed they can only change their location by cycling through the biosphere true or false ??

Answers

Answer:

true

Explanation:

Answer:

True

Explanation:

Chemicals like Nitrogen, Carbon and Oxygen cannot be made or destroyed they can only change their phase and location.

There are several biogeochemical cycle in the environment which keeps the essential nutrient in rotation within the ecosystem.

Such as carbon cycle, nitrogen cycle, phosphorus cycle etc.  

In all these cycles, the nutrient is being continuously cycled between the producer (plants & trees), consumers (animals & human beings) and the decomposers (bacteria’s etc.)  

These nutrients continuously changes their form and place in order to be in a used efficiently.

which energy source contributes the most to climate change

Answers

Answer:

Fossil fuels (Coal, oil, gas)

Explanation:

Burning these will produce energy, but it will also release greenhouse gases such as carbon dioxide and nitrous oxide.

How are alleles for the same gene related

Answers

Answer:

They make up the gene and decode what it is and does.

Explanation:

Alleles from the same gene are related because while they both come from different people, they affect the same gene. The two or more alleles make up the gene they form. They also decide whether the gene will be dominate or recessive.

Final answer:

Alleles are different versions of a gene that determine traits, with each parent contributing one allele to the offspring. There can be dominant and recessive alleles that influence the phenotype, and individuals can be homozygous or heterozygous for a trait.

Explanation:

Alleles for the same gene are related because they are different versions of the same gene that determine various traits such as eye color, blood type, or hair color. Each allele contains a unique sequence of DNA, which can result in different physical characteristics, known as the phenotype. We receive one allele from each parent, giving us two alleles for each gene, which can be either homozygous (identical alleles) or heterozygous (two different alleles). Genes can express themselves in various ways; some alleles are dominant while others are recessive, and this interaction is essential in determining an organism's traits. For instance, the gene for blood type has three possible alleles: A, B, and O. Homozygous individuals have two identical alleles while heterozygous individuals have two different alleles, which can result in varying expressions of the gene.

Modern thermal power plants generate power basically the same way the old steam engines do

true or false

Environmental Science B Exam

Answers

The statement, Modern thermal power plants generate power basically the same way the old steam engines do, is true.

Answer:

True.

Explanation:

Basically, the thermoelectric plants generate energy through a heated boiler where the water contained there will generate steam, that under high pressure, will move the turbines of a turbine of energy generator. Basically the same as the old steam engines generated energy.

After the movement of the turbines, the steam used goes directly to a condenser, where it will be subjected to low temperatures that will result in the transformation of the steam into water. This water returns to the boiler, starting the process once again.

which of the following statements about scientific theories are true? (A) theories cannot be tested (B) theories are the same as hypotheses. (C) theories can be used to predict the existence of as yet unobserved things or phenomena. (D) theories are ethical principles based on a religious foundation

Answers

(C)theories can be used to predict the existence of as of yet unobserved things or phenomena

Final answer:

The true statement about scientific theories is that they can be used to predict unobserved phenomena. Theories are well-established frameworks, different from hypotheses, that can be empirically tested and are not ethical precepts. The correct option is: (C) theories can be used to predict the existence of as yet unobserved things or phenomena.

Explanation:

This statement is true because scientific theories are not merely guesses; they are comprehensive frameworks supported by a body of evidence that can make predictions about the natural world.

Theories can be tested and they are different from hypotheses. Theories are much more established and are supported by evidence collected from multiple experiments or observations. Also, they are not based on ethical or religious principles, but rather on empirical evidence. A theory may begin as a hypothesis, which is a proposed explanation made on the basis of limited evidence as a starting point for investigation. However, once a hypothesis has been tested repeatedly and consistently supports the evidence, it may become a theory.

In science, theories are crucial because they provide explanations that predict and can be tested in various ways, and can be used to understand and predict the occurrence of future events or discoveries. When new evidence appears that contradicts a theory, the theory is reconsidered and may be revised. This is how science advances knowledge.

Does the following statement describe a function of DNA, a function of RNA, a function of both DNA and RNA, or a function of neither DNA nor RNA? It stores in the nucleus the information a cell needs to make its proteins with the right orders of amino acids.

DNA


RNA


both DNA and RNA


neither DNA nor RNA

Answers

Answer:

DNA

Explanation:

DNA I held in the nucleus, because the nucleus is the 'brain's and DNA is the 'knowledge' held there. RNA is coded IN the nucleus, but then leaves and goes into the cytoplasm where it undergoes translation.

A salt solution has a concentration of 200 g/L. How many grams of salt would be contained in 2 L of this solution?

Answers

Answer:

400g

Explanation:

Ok, so we have 200g per L of the salty solution.

we can take 200g*2L to get 400g in the 2L of solution

Therefore the answer is 400g/2L or 400g

the answer is 400 grams

A researcher observes two species of frogs in the same area. Both species have a similar diet. One species breeds in fast-moving streams, while the other species breeds in ponds. Both species are similar in appearance and have very similar DNA. This is most likely an example of

Geographical isolation.

Habitat isolation.

Behavioral isolation.

Temporal isolation

Answers

Answer:

Behavioral isolation.

Explanation:

SInce the example is saying that both species of frogs are in the same area, this eliminates the option of geographical and habitat isolation, since they are already togheter and have similar diet, appearence and DNA this means they could interbreed, and since the example is not saying anything about breeding times for each species, we can not assume this is a temporal isolation, so the only thing that sets them apart is the fact that they have different breeding rituals, since one species breeds on water ponds and the other in fast-moving streams, this is known as Behavioral Isolation, since it´s their breeding rituals that keeps them from interbreeding.

Which level of organization is the highest?

Answers

The highest level of organization for living things is the biosphere.

Answer:

Biosphere

Explanation:

The biosphere is the highest level of organization. The biosphere not only involves living things but also relationships and interactions between them.

The basic unit of living beings is cell which forms tissue. The tissues are involved in the formation of organs which further develops a organ system in an organism. Thus forming an organism, then populations. The various number of populations forms communities which further form ecosystem and then the highest level of organization that is biosphere.

Suppose an environmental change that causes the soil color to become much different occurs in both environments. Which of the following is true?

Answers

I'll need to see the choices/options in order to answer.

Answer:

Population 1 is more likely to adapt and survive than population 2 because there is more variation related to body color in population 1

Explanation:

That was the answer in study island :/

Sara and Austin look more like their mother than their father, why?

Answers

Answer:because Austin and Sara inherit more of their mother"s genes

Explanation:

Austin and Sara inherited more of their mother’s genes.

A student is trying to match organ systems together according to their functions. Which of the following organ systems are best paired in terms of their functions being opposite to one another?

A. immune and integumentary systems
B. nervous and endocrine systems
C. digestive and excretory systems
D. muscular and skeletal systems
E. circulatory and lymphatic systems

Answers

Circulatory and lymphatic systems

Answer:

C

Explanation:

Whose system of classifying and naming organisms is still in use today?
Sutton
Linnaeus
Aristotle
Darwin

Answers

Answer:

Linnaeus

Explanation:

The classifying and name organisms that is still in use today is Linnaeus.

Hope this helped,
t h a n k u n e x t

Drag and drop the terms on the left to complete the concept map

Answers

Do you have a picture of the concept map? :)

Drag and drop the terms on the left to complete the concept map

Further explanation Evolution might result in New structures   such as in amphibians gained Bony fishes Evolution might result in New structures  such as Bony fishes Evolution might result in New structures .  such as in  amphibians had features of Limbs such as Bony fishes Evolution might result in New structures   such as Bony fishes Evolution might result in New structures   such as in  amphibians  had features of gills such as TiktaalikEvolution might result in New structures   when compared to other species, may be Analogous structures if related by Common functionEvolution might result in New structures   when compared to other species, may be homologous structures if related by Common ancestry

Analogous structures have different evolutionary ancestries but they have the same function. Physical features shared due to evolutionary history (a common ancestor) are said to be homologous.  Examples of Analogous structures are the wings of birds, bats and insects. Whereas homologous structures are the opposite. They have similar ancestries and common traits but maybe not have the same function in an organism.

Tiktaalik better known as the "fishapod," is a 375 million year old fossil fish which was discovered in the Canadian Arctic in 2004. Tiktaalik have fins with thin ray bones, scales, and gills like most fish.

Learn moreLearn more about  Tiktaalik https://brainly.com/question/6788562Learn more about Analogous structures https://brainly.com/question/908450Learn more about homologous structures https://brainly.com/question/2634965

Answer details

Grade:  9

Subject:  biology

Chapter:  the concept map

Keywords: Tiktaalik,  homologous structures,  Analogous structures,  the concept map, Bony fishes

Distinguish between mudflows and earth flows

Answers

Mudflows are rapid movements of water-saturated soil, notable for their high water content and perceptible speed, often found in arid regions. Earth flows are slower, lack defined channels, are common in humid areas, and contain less water. Debris flows involve larger materials and occur under different conditions, such as steeper slopes and greater water presence.

Differences Between Mudflows and Earth Flows

When comparing mudflows to earth flows, several key distinctions can be noted. First, mudflows are rapid downslope movements of water-saturated soil and regolith, which are easily perceptible due to their higher water content. They are more prevalent in arid regions with sparse vegetation and can occur after heavy rainfall or during volcanic eruptions. In contrast, earth flows are much slower and can sometimes be almost imperceptible. They are not confined to channels like mudflows and are more commonly found in humid areas. Additionally, earth flows tend to have lower water content compared to mudflows.

Mudflows consist mostly of sand-sized or smaller particles and can take on the form of lahars during volcanic activity, while earth flows involve finer materials. Debris flows, which are closely related to mudflows, involve larger clasts and require steeper slopes and more water to occur, often resulting in the collapse of bank material into a stream, leading to a sudden rush of water and debris.

Scientists know that organisms that are more closely related will have DNA sequences more similar to each other than organisms that are distantly related. Which two organisms below would most likely have the fewest similar nucleotide sequences in a given gene?

Answers

Answer:

An alligator and an earthworm

Scientists know that organisms that are more closely related will have DNA sequences that are more similar to each other than organisms that are distantly related, the two organisms that would most likely have the fewest similar nucleotide sequences are humans and the bacterium present in Option a.

What is evolutionary relatedness?

The relationship between evolutionary relatedness and DNA similarity arises from the fact that DNA sequences change over time while mutations can arise through various mechanisms, such as errors in DNA replication or exposure to mutagens, etc. As a result, organisms that diverged more recently from a common ancestor are expected to have more similar DNA sequences and more evolutionary relatedness than those that diverged further back in time.

Hence, the two organisms that would most likely have the fewest similar nucleotide sequences are humans and the bacterium present in option a.

Learn more about the evolutionary relatedness here.

https://brainly.com/question/29680003

#SPJ6

the question is incomplete, the complete question is below

Scientists know that organisms that are more closely related will have DNA sequences more similar to each other than organisms that are distantly related. Which two organisms below would most likely have the fewest similar nucleotide sequences in a given gene?

a)humans and the bacterium

b)human male and the human female

PLEASE HELP!!!!
Describe the hierarchical relationships between the universe, galaxies, stars, and solar systems.

20 points

Answers

Answer:  Planets are in solar systems, solar systems are in galaxies, and galaxies are in the universe.

Explanation: Universe >> Galaxies >> Solar Systems >> Planets

Final answer:

The universe is the largest scale structure that encompasses everything, including all the galaxies, stars, and solar systems. Galaxies are large collections of stars, gas, and dust held together by gravity. Stars are massive balls of hot, glowing gas that are found within galaxies. Solar systems are smaller systems within galaxies that consist of a star, such as the Sun, and the various celestial bodies orbiting around it.

Explanation:

The hierarchical relationships between the universe, galaxies, stars, and solar systems can be understood in the following way:

Universe: The universe is the largest scale structure that encompasses everything, including all the galaxies, stars, and solar systems.Galaxies: Galaxies are large collections of stars, gas, and dust held together by gravity. The Milky Way is an example of a galaxy.Stars: Stars are massive balls of hot, glowing gas that are found within galaxies. They are formed from the collapse of gas and dust and are responsible for producing light and heat.Solar Systems: Solar systems are smaller systems within galaxies that consist of a star, such as the Sun, and the various celestial bodies orbiting around it, including planets, moons, asteroids, and comets.

The relationship between electricity and magnetism is called ?

Answers

The relationship between electricity and magnetism is called electromagnetism.

the relationship between electricity and magnetism is called Electromagnetism.

Other Questions
Read the passage. (1) Fights have been a part of hockey for decades, but should they continue to characterize the sport? (2) For my part, I believe that fighting should not be allowed in hockey. (3) Hockey fights lead to injuries for the players, such as pulled muscles and concussions. (4) Hockey fights set a poor example for fans watching, particularly children. (5) Children will look to athletes as role models and mimic their behaviors, leading to violence or injuries. How can the passage best be revised to eliminate logical fallacies and improve clarity? Select three options. Use Euler's formula to find the missing numbervertices: 16edges: 43face:??? What is the surface area of the figure shown?484.8 square inches500.8 square inches452.8 square inches404.8 square inches Which of the following statements is true? What American innovations contributed to the textile industry in the United States The pH of a solution is 4.36. What is the pOH? Dr. Martin is an ophiologist, or a scientist who studies snakes. During one experiment, Dr. Martin fed a snake a whole mouse and compared the mass of the snake before it consumed the mouse to the snake's mass immediately after it was fed. According to the law of conservation of mass, how should the masses compare? A. The mass of the snake after feeding should be the same as the original mass of the snake. B. The mass of the snake after feeding should be equal to the mass of the mouse. C. The mass of the snake after feeding should be equal to the original mass of the snake minus the mass of the mouse. D. The mass of the snake after feeding should be equal to the original mass of the snake plus the mass of the mouse. students with work study jobs are paid at least once every___? In Robert Frosts poem The Pasture, who is the speaker? I NEED ANSWER ASAP PLEASE HURRY!In a few paragraphs, explain why you think Macbeth has endured over the centuries. You may want to discuss the plays relevance today in terms of themes or characters and their experiences, or you may wish to focus on Shakespeares use of language. Whatever the thrust of your writing, be sure to cite details from the play to support your general statements about it. Please explain your answer as well. THX!!! Use the drop-down menu to complete each statement. Communist countries usually have economies. A command economy that still allows private property and ownership is called. A command economy in which the government controls everything is called . Which of the following is least likely checked by the comprehensive component monitor? A. Rationality B. Shorts-to-power C. Shorts-to-ground D. Opens Hindus venerate the cow (even when they create serious traffic hazards) in order to fully embrace the idea of ahimsa, the practice of nonviolence toward all living things. for a hindu, then, the cow is much more than an animal with four legs. how is the cow vital in this religious system? People do not believe the baseball player is hungry enough for the game, but he does not agree. Which of the following literary terms is used to describe this? A.foreshadowing B.conflict C.characterization D.resolution Next sort the underlined verbs by subject. You do not need to list duplicates suppose a fair coin is tossed and a six-sided number cube is rolled. what is the probability that the coin lands on tails in the outcome on the number cube is a number less than 3? A.) 1/6 B.) 1/12 C.) 1/9 D.) 1/3 Plzzzz help1) Given f(x)=x+4 and g(x)=12x-6, what is f(3)+g(-1)?A.) 22B.) 33C.) -11D.) 112) what is f(x).g(x) if f(x)= 2x+3 and g(x)=4x?A) 6x+3B) 6x^2+12C) 8x^2+12D) 8x+33) f(x)=2x-3 and g(x)=4x what is f(2)-g(3)A) 15B) -11C) -15D) -5 Multiply out 5x(2x-3y) Match the tiles to the correct boxes to complete the pairs. Based on the diagram, match the trigonometric ratios with the corresponding ratios of the sides of the triangle.1. cosB 2. tanC3. sinB4. tanB A) c/bB) b/aC) b/cD) c/a Random answers will be reported!