What is the percent by mass of oxygen in carbon dioxide (CO2)?
Use

%ELEMENT=TOTAL MASS OF ELEMENT IN COMPOUND/MOLAR MASS OF COMPOUND -X100

27.29%
57.12%
72.71%
79.99%

Answer:

Explanation:

You simply have to multiply it by the molar mass =

m = 50mol SnSO4 x 214.773 g/mol

m = 10.738 g SnSO4

Answer:

Mass of 50 moles of tin(II) sulfate is 10,738 grams.

Explanation:

[tex]n=\frac{m}{M}[/tex]

Where:

n = moles of compound

m = mass of compound

M = molar mass of the compound

Moles of tin(II) sulfate , n= 50 moles

Molar mass of tin (II) sulfate , M= 214.77 g/mol

m = n × M

[tex]m=50 moles \times 214.77 g/mol=10,738 g[/tex]

Mass of 50 moles of tin(II) sulfate is 10,738 grams.

Answer:

It is the process in which a known amount of solution of known concentration is added to the concentration of the another solution to determine the concentration of unknown solution.

Explanation:

Answer:

Titration

Explanation:

C) Summer

B) Full Moon

A) One (look up a lunar calendar, those can help with these question)

Hope this helps you :)

The answer is -B

if temperature and pressure are constant, the number of particles is proportional to the volume. Another way to keep the pressure constant as the volume increases is to raise the average force that each particle exerts on the surface. This happens when the temperature is increased.

Answer:

B, The volume will decrease.

Explanation:

Answer: A

When Boron-10 is struck by neutrons, it produces Lithium-7 and an alpha particle.

This is done to control the number of neutrons available to interact with Boron to control the overall reaction rate

Answer:

Option A                          

Explanation:

The reaction:

¹⁰B + ¹n  →  ⁷Li + ⁴He

Correspond to a boron neutron capture therapy, which is used for treating malignant tumors and extracutaneous melanomas.

In the reaction, the boron-10 captures the neutrons and undergoes nuclear fission to produce nuclei lithium-7 and alpha particles (nuclei ⁴He) than can kill the tumor cells.        

Hence, the correct answer is option A) when boron-10 is struck by neutrons, it produces lithium-7 and an alpha particle.

I hope it helps you!    

it is a double replacement

Answer:

Double Replacement

Explanation:

Answer:

Dependent variable

Hope this helps :)

Have a great day !

5INGH

Brainliest please

Explanation:

Answer:

Sulfur belongs to the chalcogen family. Other members of the family are oxygen, selenium, tellurium, and polonium. These elements make up Group 16 (VIA) of the periodic table. The periodic table is a chart that shows how chemical elements are related to each other.

The term chalcogen comes from two Greek words meaning "ore forming." An ore is a naturally occurring mineral used as a source for an element. Many ores are compounds of a metal and oxygen or a metal and sulfur. Compounds that contain two elements, one of which is sulfur, are called sulfides. For example, a beautiful gold-colored mineral is called pyrite, or "fool's gold," because it looks so much like real gold. Pyrite is iron sulfide (FeS 2 ).

Sulfur was known to ancient peoples. Its physical and chemical properties are very distinctive. It often occurs as a brilliant yellow powder. When it burns, it produces a clear blue flame and a very strong odor.

SYMBOL

S

ATOMIC NUMBER

16

ATOMIC MASS

32.064

FAMILY

Group 16 (VIA)

Chalcogen

PRONUNCIATION

SUL-fur

Sulfur, also spelled as sulphur, is a very important element in today's world. Its most important use is in the manufacture of sulfuric acid (H 2 SO 4 ). There is more sulfuric acid made than any other chemical in the world. It has an enormous number of important uses.

Discovery and naming

Sulfur must have been well known to ancient peoples. They sometimes referred to it as brimstone. Sulfur sometimes occurs in bright yellow layers on the top of the earth. It has a sharp, offensive odor. When it burns, it gives off a strong, suffocating smell. The odor is like that produced when a match is struck.

The Bible mentions brimstone in a number of places. For example, Sodom and Gomorrah were two towns destroyed by God for the wicked ways of their citizens: "The Lord rained upon Sodom and upon Gomorrah brimstone and fire."

But ancient people certainly did not think about sulfur the way modern chemists do. In fact, they used the word "element" to talk about anything that was basic. Ancient Greek philosophers, for example, thought that everything consisted of four elements: earth, fire, water, and air. Other philosophers thought there were only two elements: sulfur and mercury.

But early thinkers were often confused as to what they meant by the word "sulfur." They often were talking about anything that burned and gave off large amounts of smoke. To them, "sulfur" was really a "burning substance." It took centuries for scientists to identify sulfur as an element.

Explanation:

The most chemically similar element like sulfur is oxygen.

Oxygen is the most similar element to sulfur.

Let's see the similarity between oxygen and sulfur:

Sulfur - 0.88

Oxygen - 0.48

Sulfur -  1.84

Oxygen - 1.40

Sulfur (2.5) is less electronegative than oxygen, (3.4)

Thus, oxygen is most similar to sulfur.

Learn more about sulfur, here:

https://brainly.com/question/2116588

Explanation: I THINK THAT YOUR POSITIVELY CHARGED HAIR WOULD BE ATTRACTED TO THE NEGATIVELY CHARGED BALLOON AND WOULD RISE UP TO MEET BALLOON.

HOPE THIS HELPS....

Answer:

C) Your positively charged hair would be attracted to the negatively charged balloon and would rise up to meet the balloon.

Explanation:

Your positively charged hair would be attracted to the negatively charged balloon and would rise up to meet the balloon. This answer is explained in the prompt.

Answer:

C stays the same

Explanation:

As a sample of a radioactive element decays, its half-life: remains the same.

A nuclear reaction can be defined as a type of reaction in which the nucleus of an atom of a radioactive element is transformed by being joined (fusion) or split (fission) with the nucleus of another atom.

In Chemistry, the half-life of a sample of a radioactive element would remain the same even as it experiences a decay of its sub-particles.

Read more on half-life here: https://brainly.com/question/26689704

Answer:

Pure Beryl is colorless.

Explanation:

The wide range of impurities cause the diverse amount of colors and many varieties. The green color in emerald is usually caused by traces of the element chromium, and the blue color of aquamarine usually by iron.

The element that beryl, emeralds, and aquamarine have in common is beryllium.

Beryl is a mineral composed of beryllium aluminum cyclosilicate (Be3Al2Si6O18). When beryl is pure and green in color due to traces of chromium and sometimes vanadium, it is known as emerald, which is a precious gemstone. On the other hand, when beryl is blue to blue-green in color due to traces of iron, it is known as aquamarine, another valuable gemstone.

Answer: 141,95 g

In the electron sea model, metallic bonding is characterized by delocalized electrons freely moving around the metal ions, serving as a 'glue' that holds the atoms together. This model is known as the simplest metal bonding model.

The electron sea model is a representation of metallic bonding where valence electrons are free to move around, and hence are considered 'delocalized'. This forms a 'sea' of electrons that surrounds the positive metal ions. This model is the simplest metal bonding model, not the most complicated one. It is not characterized by the transfer or sharing of valence electrons (as with ionic or covalent bonding, respectively), but on the free movement of the electrons among a lattice of atomic cores. The delocalized electrons do serve as a kind of 'glue' that holds the metal atoms together, providing the electrical conductivity and malleability characteristic of metals. However, it's incorrect to say these electrons are attracted to specific nuclei - they are collectively interacting with many nuclei.

https://brainly.com/question/14638762

#SPJ6

The electron sea model describes metallic bonding as a delocalization of valence electrons among metal ions, without specifying attachment to individual atoms. It is the simplest metal bonding model, where the 'sea' of delocalized electrons acts as the glue holding the metal structure together.

The electron sea model is a framework used to describe metallic bonding, where the key characteristics involve the delocalization of valence electrons among metal ions. According to this model, metallic bonding results not from the transfer of electrons, as in ionic bonding, nor solely from the sharing of electrons, as in covalent bonding, but rather from a pooling of electrons resulting in a sea of electrons that are delocalized and free to move around. These delocalized electrons are not attached to any specific atom but are instead shared among many atoms, providing the characteristic malleability and conductivity of metals.

Regarding the options provided, the descriptions that are accurate for the electron sea model are:

The statements that electrons are attracted to specific nuclei and that they serve as the glue to keep metal atoms together do not represent the electron sea model adequately, as the electrons are not tied to any particular metal ion.

https://brainly.com/question/14638762

#SPJ3

Answer: option D

Explanation:

Since optical isomers are of 2 types called Enantiomers and Diastereomers

Enantiomers are non super impossible mirror images to each other. Examples, a man's right and left hand, Gloves

Diastereomers are non super impossible non mirror images

Answer:

Gas particles have a small volume relative to the spaces between them.

Explanation:

The study of chemicals and bonds is called chemistry. There are different types of elements and these are metals and nonmetals.

The energy formed by the motion of particles is called kinetic energy.

According to the question, the postulates are as follows:-

For more information about kinetic energy, refer to the link:-

https://brainly.in/question/3403229

The first model of the atom was developed by JJ Thomson in 1904, who thought that atoms were composed purely of negatively charged electrons. This model was known as the 'plum pudding' model

Final answer:

Scientific theories and models change over time due to new evidence and experimentation, leading to more accurate predictions and descriptions of natural phenomena. The dynamic nature of science, such as in phylogenetic modeling in biology, necessitates continual revision and refinement of theories. This iterative process propels scientific discovery and understanding.

Explanation:

Why Theories and Models Change Over Time

The development of scientific theories and models is an iterative process, continually influenced by new data and experiments. As scientists observe nature more meticulously, they gather evidence that may either corroborate or challenge existing theories. The predictive ability of models plays a crucial role in their validity; precise models enable accurate descriptions and predictions about natural phenomena. For instance, Albert Einstein's general theory of relativity radically improved our understanding of gravity, leading to predictions and the eventual discovery of black holes.

In fields like biology, the concepts of phylogenetic modeling have undergone significant change. Scientists propose new models as new research provides insights into the relationships between organisms, showcasing the dynamic nature of scientific study. Ultimately, a theory must withstand rigorous testing, and when new evidence warrants, theories are refined or replaced to incorporate this newfound understanding.

The pathway from data to scientific discovery is often directed by the models, theories, and laws that scientists construct. These not only assist in analyzing collected data, but also guide researchers to novel discoveries, furthering the cycle of scientific progress.

Answer:

Option B

Explanation:

We know that if the temperature of a gas increaseas, then the kinetic energy and the average speed increases too. For that reason, the correct answer is option B).

Answer: The correct answer is Option B.

Explanation:

Average kinetic energy is defined as the average of the kinetic energies of all the particles present in a system. It is determined by the equation:

[tex]K=\frac{3RT}{2N_A}[/tex]

where,

K = Average kinetic energy

R = Gas constant

T = Temperature of the system

[tex]N_A[/tex] = Avogadro's number

From the above relation, it is visible that kinetic energy is directly related to the temperature of the system. So, if average kinetic energy of the system increases, it means that temperature also increases and vice-versa.

Hence, the correct answer is Option B.

A quality I would say of a physical substance is hardness

Hardness

it's something you can see and tell without changing the composition of matter

Answer:20 kg * 2.2 lb/kg * 50 mg/lb * 1mL/100mg = 22 mL

Explanation:

Answer:

The correct answer is option (D) 22mL

Explanation:

Solution:

Given:

liquid concentration = 100mg/mL

weight = 20kg

dosage = 50mg/lb

converting the dosage from mg/lb to mg/kg, we have

1kg = 2.2046lb

therefore, dosage = 50mg * 2.2046/kg = 110.23mg/kg

The required solution can be obtained using the formula below

Dose = weight in kg * dosage in mg/kg ---------------1

liquid dose = dose/liquid concentration----------------2

Substituting into equation 1, we have

Dose = 20kg * 110.23mg/kg =  2204.6mg

For liquid dose, substitute into equation 2

Liquid dose = 2204.6mg/100mg/mL

                                       22. 046mL

Approximately 22mL

Therefore, 22mL is needed to be administered to the 20kg patient

Final Answer:

The process occurring in the photograph of the glacier is Calving, where chunks of ice break off from the glacier's edge, forming icebergs in bodies of water.

B. Calving

Explanation:

Glacial calving is the process captured in the photograph of the glacier. Calving occurs when chunks of ice break off from the glacier's edge, forming icebergs in bodies of water. This process is primarily driven by the glacier's continuous movement and the mechanical stress caused by its own weight. Calving is a significant contributor to ice loss from glaciers and plays a crucial role in the dynamics of glacier systems.

In the photograph, the presence of large ice blocks breaking away from the glacier's terminus is a clear indication of calving. This process is influenced by a combination of factors, including the glacier's size, ice temperature, and the surrounding environment. As the glacier advances, the ice at its terminus experiences pressure and tension, eventually leading to the fracturing and separation of ice chunks. The resulting icebergs contribute to the redistribution of glacial ice and have implications for sea level rise.

Understanding the specific glacial processes at play, such as calving, is vital for assessing the impact of climate change on glacier dynamics and predicting potential consequences for sea level and environmental systems. Monitoring and studying such phenomena contribute to a more comprehensive understanding of Earth's changing landscapes.

Full Question:

2. Which process is occurring in this photograph of a glacier?

A. Melting

B. Calving

C. Abrasion

D. Plucking

Yes, radioactive decay releases energy

Answer:

carbonic acid

Explanation:

Carbonic acid refers to the natural existent acid in our atmosphere which is produced when water reacts with water vapor and it makes rain naturally acid. As a result, rainwater is always acidic. On the other hand, acid rain occurs when precipitation contains a higher than normal acidity  and a pH lower than 5.0.

Answer:

Carbonic acid

Explanation:

Hello,

In this case, due to the increasing concentration of carbon dioxide in the atmosphere, when it rains, the following chemical reaction occurs between water and carbon dioxide:

[tex]CO_2+H_2O\rightarrow H_2CO_3[/tex]

Whose product is known as carbonic acid and it is the natural source of acidity in acid rain.

Regards.

Answer:

Elements in group 15 will gain electrons and it will gain 3 electrons to obtain a noble gas structure.

Explanation:

A noble gas structure is obtained when it completes a full octet around the atom. Meaning it has 8 electrons in its outer shell.

Group 15 is also known as Group 5A or the Nitrogen group. The nitrogen group have 5 valence electrons. Now something to remember about gaining and losing electrons. When the outershell is more than half full, it is more likely to attract electrons to itself. When the outershell is less than half full, it is more likely to lose electrons.

So in the case of group 15, which has 5, it is closer to 8, so it will gain an electron. To complete the octet, it will need 3 more electrons.

The decay of a carbon-11 atom decreases the number of protons and increases the number of neutrons and causes it to emit radiations.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

When an atom undergoes decay, the number of protons present in the nucleus are decreased and radiations are emitted.

Learn more about atom,here:

https://brainly.com/question/1566330

#SPJ4

The decay of a carbon-11 atom undergoes beta-plus decay (β+ decay)and this causes it to emit emits a positron (β+) and a neutrino (v).

Step 1: Unstable Nucleus

A carbon-11 atom has an unstable nucleus because it contains an excess of protons compared to neutrons. This instability makes it prone to radioactive decay.

Step 2: Positron Emission

During positron emission, a process that stabilizes the nucleus, the following occurs:

Muscles convert chemical energy into mechanical energy

Answer:

Mechanical

Explanation:

I did it.

Answer:

[tex]\boxed{\text{1000 g}}[/tex]

Explanation:

We know we will need a balanced equation with masses, moles, and molar masses, so let’s gather all the information in one place.

M_r:                           84.01  

              H₂SO4 + 2NaHCO₃ ⟶ Na₂SO₄ + 2CO₂ + 2H₂O

n/mol:         6

1. Use the molar ratio of NaHCO₃ to calculate the moles of NaHCO₃.

[tex]\text{Moles of NaHCO$_{3}$ = 6 mol H$_{2}$SO$_{4}$} \times \dfrac{\text{2 mol NaHCO$_{3}$}}{\text{1 mol H$_{2}$SO$_{4}$}}\\=\text{12 mol NaHCO$_{3}$}[/tex]

2. Use the molar mass of NaHCO₃ to calculate the mass of NaHCO₃.

[tex]\text{Mass of NaHCO$_{3}$ = 12 mol NaHCO$_{3}$} \times \dfrac{\text{84.01 g NaHCO$_{3}$}}{\text{1 mol NaHCO$_{3}$}}\\\\= \text{1000 g NaHCO$_{3}$}[/tex]

You must use [tex]\boxed{\textbf{1000 g}}[/tex] of NaHCO₃.

Answer: -COOH

Explanation: In general, carboxylic acids are represented by the formula RCOOH, where R is a hydrocarbon group and COOH is the fuctional group.

-

-

The functional group for a carboxylic acid is -COOH.

An organic acid containing a carboxyl group. The simplest examples are methanoic (or formic) acid and ethanoic (or acetic) acid.

Organic acids such as acetic acid all contain a functional group called a carboxyl group. The carboxyl group contains the C=O. of the carbonyl group, with the carbon atom also being bonded to a hydroxyl (−OH) group. The simplest carboxylic acid is acetic acid [tex](CH_3COOH)[/tex]

Hence, the functional group for a carboxylic acid is -COOH.

Learn more about the carboxylic acid here:

https://brainly.com/question/15522377

#SPJ2

I believe the answer is Big Science.

a compass works with magnetic field the answer is d

Answer:

[tex]\boxed{\text{53 g }}[/tex]

Explanation:

You don't give the reaction, but we can get by just by balancing atoms of Na.

We know we will need the partially balanced equation with masses, moles, and molar masses, so let’s gather all the information in one place.

M_r:                                 142.04  

             2NaOH + … ⟶ Na₂SO₄ + …  

n/mol:      0.75

1. Use the molar ratio of Na₂SO₄ to NaOH to calculate the moles of NaF.

Moles of Na₂SO₄ = 0.75 mol NaOH × (1 mol Na₂SO₄/2 mol NaOH

= 0.375 mol Na₂SO₄

2. Use the molar mass of Na₂SO₄ to calculate the mass of Na₂SO₄.

Mass of Na₂SO₄ = 0.375 mol Na₂SO₄ × (142.04 g Na₂SO₄/1 mol Na₂SO₄) = 53 g Na₂SO₄

The reaction produces [tex]\boxed{\text{53 g }}[/tex] of Na₂SO₄.

Final answer:

0.75 moles of NaOH would form 0.375 moles of Na2SO4, based on the stoichiometry of the chemical equation provided. The mass of Na2SO4 produced would be 53.25 grams.

Explanation:

The reaction described involves NaOH and amounts to a stoichiometry problem where we determine the amount of a product formed from a given amount of reactant. In the given chemical equation:
4NaOH(aq) + 2S(s) + 302(g) → 2Na2SO4(aq) + 2H₂O(l),
there is a clear stoichiometric relationship between NaOH and Na2SO4. Specifically, 4 moles of NaOH yield 2 moles of Na2SO4, which means 2 moles of NaOH would produce 1 mole of Na2SO4. Given that 0.75 moles of NaOH reacted, they would form half of 0.75 moles of Na2SO4, which is 0.375 moles of Na2SO4. To find the mass in grams, we would need the molar mass of Na2SO4, which is approximately 142 g/mol.

Moles of Na2SO4 formed = (0.75 moles NaOH × 1 mole Na2SO4) / 2 moles NaOH

Mass of Na2SO4 formed = 0.375 moles × 142 g/mol = 53.25 grams.