Answer:
The sum of all outputs must equal the input.
Explanation:
Which best supports the idea that the surface of the moon has changed very little?
a) If photographs of the moon were taken millions of years ago, the surface would look the same.
b) Because the moon does not have a large iron core, it is not possible for geologic events to occur on the moon.
c) Because the moon has no atmosphere, it is not possible for geologic events to occur on the moon.
d) If one considers the history of the moon, there is only one distinct phase of its development.
SI is considered a consistent system because it
SI (International System of Units) is a consistent system in mathematics because it provides standard and consistent measurements based on fundamental constants of nature.
Explanation:In mathematics, SI (International System of Units) is considered a consistent system because it provides a standard and consistent way of measuring physical quantities such as length, mass, time, and temperature.
SI units are based on fundamental constants of nature and are internationally recognized and used. For example, the meter is defined as the distance traveled by light in a vacuum during a specific time interval.
Consistency in SI units allows for easy comparisons, calculations, and communication across different scientific disciplines and countries.
Learn more about SI (International System of Units) here:https://brainly.com/question/30404877
#SPJ2
How does the strength of an electromagnet depend on the current and the number of turns in the coil?
Strength of Electromagnet increases when either the "Current" or "Number of turns in a coil" increases.
They are directly proportional to strength of Electromagnet.
Explanation:
To compile, the power or intensity of a coils magnetic field depends on the following circumstances. The number of turns of wire within the coil. The amount of current running in the coil. An electromagnet is a temporary magnet; the magnetic field only survives when an electric current is running through it. The power of the electromagnet depends on how many coils you wind around and how great the voltage is.
Find the equilibrium concentrations of A, B, and C for a=1, b=1, and c=2. Assume that the initial concentrations of A and B are each 1.0 M and that no product is present at the beginning of the reaction.
Consider the following reaction and associated equilibrium constant:
aA(g)+bB(g)⇌cC(g), Kc = 4.0
The equilibrium concentration of A is [tex]\boxed{\frac{1}{3}}[/tex].
The equilibrium concentration of B is [tex]\boxed{\frac{1}{3}}[/tex].
The equilibrium concentration of C is [tex]\boxed{\frac{2}{3}}[/tex].
Further explanation:
Chemical equilibrium is the state in which the concentration of reactants and products become constant and do not change with time. This is because the rate of forward and backward direction becomes equal. The general equilibrium reaction is as follows:
[tex]{\text{A(g)}}+{\text{B(g)}}\rightleftharpoons{\text{C(g)}}+{\text{D(g)}}[/tex]
The equilibrium constant is the constant that relates the concentration of product and reactant at equilibrium. The formula to calculate the equilibrium constant for the general reaction is as follows:
[tex]{\text{K}}=\dfrac{{\left[ {\text{D}}\right]\left[{\text{C}}\right]}}{{\left[{\text{A}} \right]\left[{\text{B}}\right]}}[/tex]
Here, K is the equilibrium constant.
The given reaction is,
[tex]{\text{aA}}\left( g \right)+{\text{bB}}\left( g \right) \rightleftharpoons{\text{cC}}\left( g \right)[/tex]
Here,
A and B are the two reactants.
C is the product formed.
a and b are the stoichiometric coefficients of A and B respectively.
c is the stoichiometric coefficient of C.
The expression of [tex]{{\text{K}}_{\text{c}}}[/tex] for the above reaction is as follows:
[tex]{{\text{K}}_{\text{c}}}=\dfrac{{{{\left[{\text{C}}\right]}^{\text{c}}}}}{{{{\left[{\text{A}} \right]}^{\text{a}}}{{\left[{\text{B}}\right]}^{\text{b}}}}}[/tex] ...... (1)
Here,
[tex]{{\text{K}}_{\text{c}}}[/tex] is the equilibrium constant that is concentration-dependent.
Let the change in concentration at equilibrium is x. Therefore, the concentration of C becomes x at equilibrium. The concentration of A and B become 1-x at equilibrium.
Substitute x for [C] , 1-x for [A] and 0.57-x for [B], 1 for a, 1 for b and 2 for c in equation (1).
[tex]{{\text{K}}_{\text{c}}}=\dfrac{{{{\left[ {\text{x}} \right]}^2}}}{{{{\left[{{\text{1 - x}}} \right]}^{\text{1}}}{{\left[{{\text{1 - x}}}\right]}^{\text{1}}}}}[/tex] ...... (2)
Rearrange equation (2) and substitute 4 for [tex]{{\text{K}}_{\text{c}}}[/tex] to calculate the value of x.
[tex]{{\text{x}}^2}=\dfrac{{{\text{8x}} - 4}}{3}[/tex]
The final quadratic equation is,
[tex]{\text{3}}{{\text{x}}^2}-8{\text{x}}+4=0[/tex]
Solve for x,
[tex]{\text{x}}={\text{2 , }}\dfrac{2}{3}[/tex]
The value of x equal to 2 is not accepted as it would make the equilibrium concentration of A and B negative, which is not possible. So the value of x comes out to be 2/3.
The equilibrium concentration of [C] is equal to 2/3.
The equilibrium concentration of A is calculated as follows:
[tex]\begin{aligned}\left[ {\text{A}}\right]&=1-\frac{2}{3}\\&=\frac{1}{3}\\\end{aligned}[/tex]
The equilibrium concentration of B is calculated as follows:
[tex]\begin{aligned}\left[ {\text{B}}\right]&=1-\frac{2}{3}\\&=\frac{1}{3}\\\end{aligned}[/tex]
So the equilibrium concentrations of A, B and C are 1/3, 1/3 and 2/3 respectively.
Learn more:
1. Calculation of equilibrium constant of pure water at 25°c: https://brainly.com/question/3467841
2. Complete equation for the dissociation of (aq): https://brainly.com/question/5425813
Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Equilibrium
Keywords: equilibrium constant, A, B, C, a, b, c, 1, 1, 2, 1/3, 1/3, 2/3, Kc, concentration dependent.
A rectangular pool has a volume of 375 m3. the pool is 10 m long and 5 m wide. how deep is the pool? 7.5 m 3,750 m 75 m
Which of the following materials is likely to be the best conductor?
iron
sulfur
carbon
tin
Answer: Option (a) is the correct answer.
Explanation:
Metals are the substance which have excess of electrons. Therefore, they are good conductors of heat and electricity as they have mobile electrons.
Out of the given options, iron is a transition metal which are good conductors of heat and electricity.
Sulfur and carbon are non-metals, therefore, they are bad conductors of heat and electricity.
Tin is a poor metal so it will not conduct electricity effectively as compared to iron.
Thus, we can conclude that out of the given options, iron is likely to be the best conductor.
A cold beer initially at 35ºF warms up to 40ºF in 3 min while sitting in a room of temperature 70ºF. How warm will the beer be if left out for 20 min
Final answer:
Using Newton's law of cooling, we can calculate that the beer will be approximately 60.4ºF if left out for 20 minutes.
Explanation:
To calculate the final temperature of the beer after being left out for 20 minutes, we can use Newton's law of cooling. This law states that the rate of heat loss of an object is proportional to the temperature difference between the object and its surroundings. In this case, the initial temperature of the beer is 40ºF and the room temperature is 70ºF. Let's determine the constant of proportionality, k, first:
k = (T2 - T1) / t = (70 - 40) / 3 = 10
Now we can use the formula to find the final temperature, T3, after 20 minutes:
[tex]T3 - 70 = (40 - 70)e^(-10(20/3))[/tex]
[tex]T3 - 70 = -30e^(-20/3)[/tex]
[tex]T3 = 70 - 30e^(-20/3)[/tex]
Using a calculator, we can find that T3 is approximately 60.4ºF.
The height of a triangle is 4 in. greater than twice its base. The area of the triangle is no more than 168 in.2. Which inequality can be used to find the possible lengths, x, of the base of the triangle?
The inequality x² + 2x - 168 ≤ 0 can be used to determine the possible lengths of the base of a triangle when the height is 4 inches greater than twice the base and the area is no more than 168 square inches.
To find the possible lengths of the base of a triangle where the height is 4 inches greater than twice the base and the area is no more than 168 square inches, we start with the formula for the area of a triangle:
Area = (1/2) × base × height.
Let the base be x. Thus, the height can be expressed as 2x + 4. Therefore, the area equation becomes:
(1/2) × x × (2x + 4) ≤ 168
To simplify this, multiply both sides by 2:
x(2x + 4) ≤ 336
Expanding and rearranging the terms gives:
x² + 4x ≤ 336
Subtract 336 from both sides to form a quadratic inequality:
x² + 4x - 336 ≤ 0
Divide the entire inequality by 2 to simplify:
x² + 2x - 168 ≤ 0
This is the inequality that can be used to find the possible lengths of the base of the triangle.
In 1831, Michael Faraday was the first to realize that an electric current could be induced by passing a magnet through a coil of copper wire. Which factor is MOST essential for the induction of the electric current?
Answer:
D
Explanation:
it is the correct answer on usa test prep
A 17,000-kg airplane lands with a speed of 82 m/s on a stationary aircraft carrier deck that is 115 m long. find the work done by nonconservative forces in stopping the plane
The work done by nonconservative forces in stopping the 17,000-kilogram airplane landing at a speed of 82 m/s is 57,062,000 Joules. This is calculated by the change in kinetic energy of the airplane when it lands and comes to a stop.
Explanation:The question refers to the concept of work-energy theorem in Physics, especially involving non-conservative forces. The airplane is initially moving and finally comes to rest. Its initial kinetic energy (KE) gets transferred to work done by nonconservative forces, which in this scenario includes friction due to the aircraft carrier deck and air resistance.
The initial kinetic energy of the plane is calculated using the formula 1/2 * m * v^2 where 'm' is the mass of the plane and 'v' is its speed. So, the initial kinetic energy of the plane is 1/2 * 17,000 kg * (82 m/s)^2 = 57,062,000 Joules. When the plane comes to rest, its final kinetic energy is 0. As per the work-energy theorem, the work done by nonconservative forces is equal to the change in the kinetic energy. Therefore, the work done by nonconservative forces in stopping the plane = Initial KE - Final KE = 57,062,000 Joules - 0 = 57,062,000 Joules.
Learn more about Work-energy theorem here:https://brainly.com/question/30560150
#SPJ12
The work done by nonconservative forces in stopping the airplane is [tex]{57,154,000 \, \text{J}}[/tex].
To find the work done by nonconservative forces (like friction and air resistance) in stopping the airplane, we can use the work-energy principle. The work done by the nonconservative forces is equal to the change in the kinetic energy of the airplane.
Step-by-Step Solution
1. Calculate the initial kinetic energy ([tex]KE_{\text{initial}}[/tex]):
[tex]KE_{\text{initial}} = \frac{1}{2} m v^2[/tex]
where:
- m is the mass of the airplane (17,000 kg),
- v is the initial speed (82 m/s).
[tex]KE_{\text{initial}} = \frac{1}{2} \times 17,000 \, \text{kg} \times (82 \, \text{m/s})^2 \\\\KE_{\text{initial}} = \frac{1}{2} \times 17,000 \times 6,724 \\\\KE_{\text{initial}} = 57,154,000 \, \text{J}[/tex]
2. Calculate the final kinetic energy ([tex]KE_{\text{final}}[/tex]):
Since the airplane comes to a stop, its final speed is 0 m/s.
[tex]KE_{\text{final}} = \frac{1}{2} m (0)^2 = 0 \, \text{J}[/tex]
3. Calculate the change in kinetic energy (ΔKE):
[tex]\Delta KE = KE_{\text{final}} - KE_{\text{initial}} \\\\\Delta KE = 0 \, \text{J} - 57,154,000 \, \text{J} \\\\\Delta KE = -57,154,000 \, \text{J}[/tex]
4. The work done by nonconservative forces (W):
The work done by nonconservative forces is equal to the negative of the change in kinetic energy (since they are doing work to stop the airplane).
[tex]W = -\Delta KE \\\\W = -(-57,154,000 \, \text{J}) \\\\W = 57,154,000 \, \text{J}[/tex]
Therefore, the work done by nonconservative forces in stopping the airplane is [tex]{57,154,000 \, \text{J}}[/tex] .
two vectors A and B have components (0,1) and (-1,3), respectively. What is magnitude of the sum of these two vectors?
a) 3.2
b) 4.1
c) 3.9
d) 2.8
___ acceleration occurs when an object speeds up
Explanation:
Acceleration is defined as the change in velocity over time.
When there is an increment or increase in the magnitude of velocity of a moving body then it is known as positive acceleration.
Whereas when there is a decrease in magnitude of velocity of a moving body then it is known as negative acceleration.
Thus, we can conclude that positive acceleration occurs when an object speeds up.
The acceleration that leads to the increase in the speed of the object is called as Positive acceleration.
Explanation:
The acceleration of a body is defined as the amount of change taking place in the magnitude of the velocity of the body in every second. The acceleration of the body is a vector quantity as it requires the direction along with the magnitude of change in the speed of the body.
If the acceleration of the body is acting in the direction opposite to the direction of motion of the body, then the acceleration tends to decrease the speed of the body and it is called as deceleration.
Whereas if the acceleration of a body is in the direction same as that of the direction of motion of the body, then the acceleration of the body increases the speed of the body and this acceleration is termed as the positive acceleration of the body.
Therefore, the acceleration of an object that tends to speed up the object must be acting in the direction same as the direction of motion of the body and therefore it is termed as the positive acceleration of the body.
Thus, The acceleration that leads to the increase in the speed of the object is called as Positive acceleration.
Learn More:
1. Transnational kinetic energy brainly.com/question/9078768.
2. Motion under friction brainly.com/question/7031524.
3. Conservation of momentum brainly.com/question/9484203
Answer Details:
Grade: High School
Subject: Physics
Chapter: Acceleration
Keywords:
acceleration, rate of change, velocity, speed, increase, per second, direction, opposite, motion, along, speed up.
A 12 g bullet is fired into a 9.0 kg wood block that is at rest on a wood table. The block, with the bullet embedded, slides 5.0 cm across the table. The coefficient of kinetic friction for wood sliding on wood is 0.20.
What was the speed of the bullet?
The initial speed of the bullet can be determined using the principles of conservation of momentum and the work-energy theorem. Conservation of momentum gives us the velocity of the block and bullet after collision, and the work-energy theorem using the friction force and the distance gives us the velocity.
Explanation:This question can be solved using the principles of conservation of momentum and the work-energy theorem. Using conservation of momentum before and after the collision, we can put: Momentum before = Momentum after. Therefore, (mass of bullet * velocity of bullet) = (total mass * velocity after). This gives us the velocity of the block and bullet together. From the work-energy theorem, work done = change in kinetic energy. Or, friction force * distance = 1/2 * mass * (velocity)^2. But friction force = mass * gravity * coefficient of friction, which gives us the equation 0.20 * 9.01 * 9.81 * 0.05 = 1/2 * 9.01 * (velocity)^2. Solving the equations together will give you the initial speed of the bullet.
Learn more about conservation of momentum here:https://brainly.com/question/33316833
#SPJ3
a baseball pitcher throws a fastball at 42 meters per second. if the batter is 18 meters from the pitcher, approximately how much time does it take for the ball to reach the batter?
The time taken by the ball to reach the batter is 0.42 seconds
The baseball pitcher throws a fastball at 42 m/s
The batter is about 18 meters from the pitcher
Therefore the time for the ball to reach the batter can be calculated as follows;
= 18/42
= 0.42 secs
Hence the time taken by the ball to reach the batter is 0.42 seconds
Please see the link below for more information
https://brainly.com/question/13719636?referrer=searchResults
A football is kicked at an 50 degree angle to the horizontal , travels a horizontal distance of 20m before hitting the ground. what is the initial speed?
Answer:
Initial speed of football=14.11m/s
Explanation:
Range is the horizontal distance travelled. Therefore using formular for Range,R to determine the speed.
R=V^2Sin2theta/g
Given: R=20m
Theta=50°
20= V^2 Sin(2×50)°/ 9.8
Cross multiply
20×9.8 = V^2 Sin100°
196= V^2×0.9848
V=Sqrt(196/0.9848)
V= 14.11m/s
5 minerals used to make phones
True or fase
a force is always required to move an object from rest.
...?
Which type of radiation is used to make images of bones inside the body?
What is the sound intensity level if the intensity of the sound is doubled??
Most of the Earth's volcanoes occuWhen fossils or minerals form, certain unstable elements are sometimes locked into them. The proportion of these unstable elements gradually decreases over time as they decay into other materials in a predictable way. Scientists use the rate at which such unstable elements decay to determine when the fossils or minerals formed. The technique described above is known as as
Radioactive dating, is your answer.
Q1. After three half-lives of an isotope, 1 billion of the original isotope's atoms still remain in a certain amount of this element. How many atoms of the daughter product would you expect to be present?
Q2. By measuring the amounts of parent isotope and daughter product in the minerals contained in a rock, and by knowing the half-life of the parent isotope, a geologist can calculate the absolute age of the rock. A rock contains 125 g of a radioisotope with a half-life of 150 000 years and 875 g of its daughter product. How old is the rock according to the radiometric dating method?
A roller coaster car is on a track that forms a circular loop in the vertical plane. If the car is to just maintain contact with the track at the top of the loop, what is the value of its centripetal acceleration at that point?
a. The value for the centripetal acceleration is g downward.
(correct answer on plato just did the mastery for this one)
At the top of the loop, where a roller coaster car is just maintaining contact with the track, its centripetal acceleration equals the acceleration due to gravity, which is 9.8 m/s².
Explanation:The value of the centripetal acceleration at the top of the loop, where a roller coaster car just maintains contact with the track, is equal to the acceleration due to gravity, which is 9.8 m/s². This can be deduced from the balancing forces at the top of the loop. In this situation, the force due to gravity is acting downwards while the centripetal force is also acting downwards - directed towards the center of the circular path. Therefore, these forces must match at the top of the loop for the car to just maintain contact with the track. This gives us the equation for centripetal acceleration, ac = g , where ac is the centripetal acceleration and g is the acceleration due to gravity.
Learn more about Centripetal Acceleration here:https://brainly.com/question/34218083
#SPJ3
Geothermal energy is generated by the sun.
True
False ...?
Which example provides the most complete description of an object's motion?
1. The ballerina rotated 10 times in 2 minutes.
2. Bobby threw a Frisbee 10 m through the hoop.
3. The turtle took 20 minutes to make it to the other side of the road.
4. The hiker followed a road heading north for 2 miles in 30 minutes.
Answer:
The hiker followed a road heading north for 2 miles in 30 minutes.
Explanation:
In order to describe the motion of an object, distance covered and time taken must be required. The total path covered by an object is called the distance travelled.
The hiker followed a road heading north for 2 miles in 30 minutes. This describes the motion of hiker. The motion shows how fast the hiker is moving.
Distance, d = 2 miles = 3218.6 m
times, t = 30 minutes = 1800 seconds
So, we can say that the hiker is moving with a speed of 1.78 m/s in north direction.
Hence, this is the required solution.
Answer:
In this case in option 4:
The hiker followed a northbound road for 2 miles in 30 minutes.
Explanation:
Hello ! Let's solve this!
To know the description of a movement we have to know the distance it travels and the time it takes to travel it.
In this case in option 4:
The hiker followed a northbound road for 2 miles in 30 minutes.
Distance: 2 miles
time: 30min
Then we can calculate the speed of the hiker
A basketball has a mass of 1 kg and is traveling 12 m / s . How fast would a 6 kg bowling ball have to travel to have the same momentum ?
a. 1 m/s
b. 2 m/s
c. 3 m/s
d. 4 m/s
A bullet is fired horizontally from the top of a building with a muzzle velocity of 150 m/s.A similar bullet dropped from the top of the same building, takes 4 sec to reach the ground. How far forward does the first bullet go before it hits the ground?
Final answer:
The horizontal distance traveled by the bullet before hitting the ground is 600 meters.
Explanation:
To determine how far forward the bullet goes before it hits the ground, we can use the fact that both the horizontally fired bullet and the dropped bullet hit the ground after a certain time. The dropped bullet takes 4 seconds to reach the ground, so we can consider its vertical motion using the equation h = 0.5 * g * t^2, where h is the height, g is the acceleration due to gravity, and t is the time. Plugging in the values, we get 0 = 0.5 * 9.8 * 4^2, which gives us h = 78.4 meters.
Since the horizontally fired bullet has the same horizontal velocity as the dropped bullet, it would take the same time to reach the ground. This means that the horizontally fired bullet travels a horizontal distance equal to its horizontal velocity multiplied by the time it takes to reach the ground. Plugging in the values, we get d = 150 * 4 = 600 meters.
Therefore, the first bullet travels 600 meters forward before hitting the ground.
The bullet fired horizontally travels 600 meters before hitting the ground because it takes the same 4 seconds as the dropped bullet to reach the ground, and it travels at a horizontal velocity of 150 m/s.
Step-by-Step Explanation:
Calculate the horizontal distance using the formula: distance = velocity x time.Here, the muzzle velocity of the bullet is 150 m/s and the time is 4 seconds.Distance = 150 m/s * 4 s = 600 meters.Conclusion:
The bullet fired horizontally travels 600 meters before it hits the ground.
Which voice can produce a pitch that has a speed of 343 m/s and a wavelength of 0.68m?
What is the torque about the center of the sun due to the gravitational force of attraction of the sun on the planet?
Final answer:
The torque about the center of the Sun due to the Sun's gravitational force on a planet is effectively zero, as the force provides centripetal force for the planet's orbit, not rotational force.
Explanation:
The question asked relates to the field of Classical Mechanics within Physics, particularly regarding the calculation of torque due to gravitational forces. In classical mechanics, torque is the measure of the force that can cause an object to rotate about an axis. The torque (τ) can be calculated by the cross product of the radius vector (r) from the axis of rotation to the point of force application and the force vector (F), τ = r x F. However, in the context of a planet orbiting the Sun, the force of gravity provides centripetal force causing the planet to move in a circular path and does not contribute to the planet spinning or rotating about its own axis. Therefore, the torque about the center of the Sun due to the Sun's gravitational force on a planet is effectively zero.
Conceptual Question 8.09osama wadi
Part A
In a perfectly ELASTIC collision between two perfectly rigid objects
the momentum of each object is conserved.
both the momentum and the kinetic energy of the system are conserved.
the kinetic energy of the system is conserved, but the momentum of the system is not conserved.
the kinetic energy of each object is conserved.
the momentum of the system is conserved but the kinetic energy of the system is not conserved.
...?
Two charged objects of +2Q and +1Q are placed a distance d from one another. The force between the objects in measured as 2F. If the charge on BOTH objects id doubled, what will the force between them be?
When the charge on both the given objects is doubled, Coulomb's Law indicates that the electrostatic force will become four times greater, resulting in a new force of 8F.
The original question asks about the effect on electrostatic force between two charged objects if both of their charges are doubled.
In the given situation, if we double the charge on both objects (from +2Q to +4Q and from +1Q to +2Q), then the product of the charges becomes 4 times greater because (4Q * 2Q) is 4 times (2Q * 1Q).
Therefore, if the force was initially measured as 2F, after doubling both charges, the force will become 4 times bigger, which is 8F.
This is represented by the option: c.