The three main subatomic particles in an atom are protons, neutrons, and electrons. Protons have a mass of 1.0073 amu and a charge of +1, neutrons have a mass of 1.0087 and no charge, and electrons have a mass of 0.00055 amu and a charge of -1. The sum of the particles' masses doesn't equal an atom's actual mass which is termed as a mass defect in nuclear chemistry.
Explanation:The question refers to the basic properties of three primary subatomic particles found in an atom: protons, neutrons, and electrons. A proton has a mass of 1.0073 atomic mass units (amu) and a charge of +1. A neutron has a slightly higher mass of 1.0087 amu and is neutral, holding no charge. An electron has a much lighter mass of about 0.00055 amu and it carries a charge of -1.
However, it's interesting to note that if you add up the mass of these subatomic particles, the total doesn't equal the actual mass of an atom. For instance, the total mass of six protons, six neutrons, and six electrons is approximately 12.0993 amu, a bit larger than the known 12.00 amu of a carbon atom. The discrepancy is referred to as the mass defect and is explained in detail in the field of nuclear chemistry.
Learn more about Subatomic Particles here:https://brainly.com/question/13303285
#SPJ2
Where does the energy that is released come from in a nuclear reaction in fission?
For each strong acid solutions, determine [h3o+],[oh−], and ph. 0.28 m hcl
For a 0.28M HCl solution, the concentration of H3O+ ions is assumed to be 0.28M due to the full ionization of strong acid. OH- concentration is obtained from the ion-product of water, and the pH is calculated from the negative log of H3O+ concentration.
Explanation:The concentration of hydronium ions [H3O+] in a 0.28M solution of HCl, a strong acid, can be assumed to be 0.28M. This is due to the complete ionization of a strong acid.
The OH- concentration [OH-] can be obtained from Kw, the ion-product of water (1x10^-14 at 25 degree Celsius). Knowing [H3O+] and Kb, we can calculate [OH-] using this relationship: [H3O+].[OH-] = Kw. The pH is then calculated from the [H3O+] using the relationship pH = -log([H3O+]).
Learn more about Strong Acid Solution here:https://brainly.com/question/34726540
#SPJ11
Name the particle that an atom can lose or gain in order to form a charged ion.
The particle that an atom can lose or gain in order to form a charged ion is electron.
How charged ion formed?When an atom lose an electron from their valence shell the it form positive charged ion known as cation.
When an atom gain an electron from their valence shell then it form negative charged ion known as anion.
To learn about electron here.
https://brainly.com/question/1255220
#SPJ3
If the nucleus of an atom contains 12 protons how many electrons are there in a neutral atom
Why is a solution not a pure substance?
A) It is made up of two substances that are chemically combined.
B) It is made up of one substance.
C) It is a mixture between a solute and solvent.
D) The solute and solvent cannot be separated.
Answer:
it is c
Explanation:
The solution is not a pure substance because it is a mixture between a solute and a solvent. Therefore, option (C) is correct.
What are the mixture and pure substance?Pure substances can be described as elements that cannot be broken down into simple substances that contain only one kind of atom in the whole composition.
A pure substance can be described as made up of two or more chemical elements that are chemically combined and has a set composition such type of pure substance is called a compound. For example, water is a pure compound that is composed of hydrogen and oxygen in a whole ratio of 2:1.
A mixture can be described as made up of two or more different substances which are only physically combined but not chemically. A mixture can be separated into its original components.
The composition of a heterogeneous mixture does not have uniform throughout the mixture while the composition in a homogeneous mixture is always the same.
Therefore, the solution is a mixture, not a pure substance.
Learn more about mixture and a pure substance, here:
brainly.com/question/6243623
#SPJ5
A sample with ss = 40 and a variance of 8 has n = 5 scores.
a. True
b. False
The formula relating the sample variance, SS and n can be written as:
sample variance = SS / (n – 1)
so let us take that:
SS = 40
n = 5
calculate variance using the formula:
sample variance = 40 / (5 – 1)
sample variance = 10
Therefore the answer is:
False
Given that you wished to use exactly 0.325 mole of nacl to prepare a 2.50 m nacl solution, how many milliliters of solution must you prepare
Aluminum and sulfur will combine to make a compound.
Al_S_
Fill in the blanks with the number of the subscript.
Part a in an effusion experiment, it was determined that nitrogen gas, n2, effused at a rate 1.812 times faster than an unknown gas. what is the molar mass of the unknown gas? express your answer to four significant figures and include the appropriate units.
The molar mass of the unknown gas is 92.0 g/mole
Explanation:
Part a in an effusion experiment, it was determined that nitrogen gas, n2, effused at a rate 1.812 times faster than an unknown gas. what is the molar mass of the unknown gas? express your answer to four significant figures and include the appropriate units.
The molar mass is the mass of a sample of that compound divided by the amount of substance in that sample in moles. Molar mass and molecular weight are often confused, but their values are very different.
Graham's law states the rate of diffusion or of effusion of a gas is inversely proportional to its molecular weight of the square root .
Graham's Law = rate of effusion of gas 2 / rate of effusion of gas 2
Graham's Law = square root (MM1 / MM2), where MM1 and MM2 are the molar masses of the gases.
Gas_2 = N_2, therefore
1.812 = √ (MM_1 / MM N_2)
1.812 = √ (MM_1 / 28.0)
1.812 = √ (MM_1 / √ 28.0 )
1.812 = √ (MM_1 / 5.29 )
1.812 x 5.29 = √ MM_1 = 9.59
MM_1 = 9.59^2 = 92.0 g/mole
Learn more about effusion experiment https://brainly.com/question/11607581
#LearnWithBrainly
Question 3 options: Potassium and oxygen will combine to make a compound. K_O_
Which of the following is true of the three isotopes? Oxygen-16, Oxygen-17, Oxygen-18 *
They have a different number of protons.
They have the same atomic mass.
They have a different number of electrons.
They have different number of neutrons.
All isotopes of an element have the same number of protons and different numbers of neutrons. So, the isotopes Oxygen-16, Oxygen-17, and Oxygen-18 have different numbers of neutrons, not protons or electrons.
Explanation:The three isotopes, Oxygen-16, Oxygen-17, and Oxygen-18, are all isotopes of the element Oxygen. This means that they have the same number of protons, as the number of protons determines the identity of an element. In this case, Oxygen isotopes all have 8 protons. However, isotopes of the same element can have different numbers of neutrons. Indeed, Oxygen-16, Oxygen-17, and Oxygen-18 have 8, 9, and 10 neutrons respectively. They also have an identical number of electrons as protons to make the atom electrically neutral.
So, the statement 'They have different number of neutrons' is the correct one among the options.
Learn more about Isotopes here:https://brainly.com/question/11680817
#SPJ2
Where do we use recrystallization in real life?
Which of the metals listed in the original list are less reactive than h2?
Copper, silver, mercury, and gold are less reactive than hydrogen as they are positioned at the bottom of the activity series and do not readily react with acids to produce hydrogen gas.
Explanation:The metals listed that are less reactive than hydrogen (H2) are those found at the bottom of the activity series. Specifically, these metals include copper (Cu), silver (Ag), mercury (Hg), and gold (Au). These metals do not react with acids to form hydrogen gas and hence are considered less reactive than hydrogen. Additionally, in the context of the electrochemical series, these metals are known as inert metals, indicating their low reactivity and their position at the very bottom of the activity series. Therefore, they do not readily corrode in the presence of dilute acids.
It's important to note that aside from basic trends, the exact order of reactivity of metals can be determined from the activity series or electrochemical series, where the lower a metal's position relative to hydrogen, the less reactive it is in comparison.
How is a hydrogen bond different from the covalent bonds that connect each water molecule atoms? *?
Final answer:
A hydrogen bond is a weak attraction between the slightly positive hydrogen end of one polar molecule and the slightly negative end of another, while a covalent bond is a strong bond involving the sharing of electrons between atoms within a molecule. Hydrogen bonds are depicted with dashed lines and covalent bonds with solid lines in molecular diagrams. The hydrogen bond is much weaker than a covalent bond, requiring significantly less energy to break.
Explanation:
The key difference between a hydrogen bond and a covalent bond is the nature of the interactions that hold atoms or molecules together. In a water molecule ([tex]H_{2}[/tex]O), the oxygen and hydrogen atoms are held together by covalent bonds, which involve the sharing of electrons between atoms and are depicted by solid lines in molecular diagrams. These bonds are quite strong because they involve the sharing of electrons to create a stable electron configuration around each atom.
In contrast, a hydrogen bond is a weak attraction between the slightly positive hydrogen end of one polar molecule and the slightly negative end of another polar molecule, such as the oxygen atom in a different water molecule. This interaction is depicted by dashed lines in molecular diagrams and does not involve electron sharing; instead, it's a result of polar covalent bonds within the molecules that create slight positive and negative charges leading to an attraction between molecules. Because hydrogen bonds are between molecules, they are much weaker than the covalent bonds within molecules, requiring only about 10% of the energy to break compared to typical covalent bonds. This behavior illustrates why we can boil water, breaking the hydrogen bonds, without breaking the water molecules themselves, which would require disrupting their covalent bonds.
Which landform represents a mound or ridge of sand?
Coastline
Delta
Dune
Glacier
Its dune. The Delta landform is involving water, not sand. Dunes are basically sand, so i would pick dune
A sample of argon gas has a volume of 5.40 l and a temperature of 15 °c. what is the final volume, in liters, of the gas if the temperature has been increased to 42 °c at constant pressure and amount of gas?
By applying Charles's law - V1/T1 = V2/T2 - and rearranging the formula as V2 = V1*(T2/T1), we find that the final volume of the argon gas when the temperature is raised to 42°C under constant pressure is 5.91 L.
Explanation:This question deals with the application of Charles's law, a fundamental concept in gas laws. Charles's law states that the volume of a gas is directly proportional to its temperature in Kelvin, assuming that pressure and the amount of gas remain constant.
First, convert the temperatures provided from Celsius to Kelvin. So, T1 = 15°C + 273 = 288 K and T2 = 42°C + 273 = 315 K. For the calculation, you would apply Charles's law formula - V1/T1 = V2/T2. Here, V1 is the initial volume (5.40 L), and T1 is the initial temperature in Kelvins (288 K). T2 is the final temperature in Kelvins (315 K), and we have to find V2 which is the final volume.
By rearranging the formula we get V2 = V1*(T2/T1) = 5.40 L * (315 K / 288 K) = 5.91 L.
Learn more about Charles's law here:https://brainly.com/question/16927784
#SPJ2
Charged particles that move around an atom's nucleus are called
Why will you never find an atom that has an actual atomic mass equal to the elements average atomic mass?
The average atomic mass of an element on the periodic table is a weighted average and not a whole number because it accounts for the different masses and abundances of each isotope, whereas the actual mass of an individual atom is approximately its mass number, a whole number.
You will never find an atom that has an actual atomic mass equal to the average atomic mass of the element because the atomic mass listed on the periodic table is a weighted average of all the naturally occurring isotopes of that element. Because each proton and each neutron has a mass of approximately one atomic mass unit (amu), and electrons contribute much less, the atomic mass of each isotope is approximately equal to its mass number, which is always a whole number. However, the average atomic mass is not a whole number because it is a calculation that includes the different masses of each isotope and their respective abundance percentages. This weighted average reflects the average mass of an atom if you could randomly pick one out of a sample containing all the isotopes of that element.
For example, carbon has two stable isotopes, 12C and 13C, with respective abundances of 98.89% and 1.11%. The average atomic mass of carbon is calculated by taking into account these abundances, leading to an average atomic mass that does not match exactly the mass of either isotope. In contrast, some elements have atomic masses in square brackets, like technetium (element 43) and promethium (element 61), which indicate the mass number of their most stable isotope because these elements do not have stable isotopes with an average atomic mass.
What kind of chemical reaction does the chemical equation sodium + chlorine → sodium chloride represent? combustion decomposition single replacement synthesis NextReset
How many moles of nitrogen are contained in 1.61 x 10^24
Final answer:
To determine the number of moles of nitrogen in 1.61 x 10²⁴ nitrogen particles, divide by Avogadro's number, resulting in 2.673 moles of nitrogen.
Explanation:
The student is asking about the number of moles of nitrogen contained in a given number of nitrogen particles. To find this, we use Avogadro's number, which is the number of particles in one mole of a substance. The value of Avogadro's number is 6.022 x 10²³ mol−1. Since the question indicates that there are 1.61 x 10²⁴ nitrogen particles, we divide this number by Avogadro's number to determine the moles.
Here's the calculation:
Number of moles (n) = Number of particles (N) / Avogadro's number (NA)
n = 1.61 x 10²⁴ particles / 6.022 x 10²³ mol−1
n = 2.673 moles of nitrogen
Which statement correctly describes the relationship between reactant and yield?
A. The actual yield is calculated from the amount of the excess reactant present
B. The actual yield is calculated from the amount of the limiting reactant present.
C. The theoretical yield is calculated from the amount of the excess reactant present.
D. The theoretical yield is calculated from the amount of the limiting reactant present.
Answer:
The theoretical yield is calculated from the amount of the limiting reactant present.
Explanation:
The limiting reactant is one which is present in lesser amount than the other reactant (based on molar ratio requirement)
For example in formation of water we need one mole of hydrogen gas and half moles of oxygen gas. Now we have one mole of hydrogen gas and one mole of oxygen gas then the limiting reagent is hydrogen gas.
theoretical yield is the expected yield of a reaction calculated based on the moles or amount of limiting reagent present as the limiting reagent is going to be completely consumed during the reaction.
Answer : The correct option is, (D) The theoretical yield is calculated from the amount of the limiting reactant present.
Explanation :
Excess reagent : It is defined as the reactants not completely used up in the reaction.
Limiting reagent : It is defined as the reactants completely used up in the reaction.
Theoretical yield : It is calculated from the amount of the limiting reagent present in the reaction.
Actual yield : It is experimentally determined.
Hence, the correct option is, (D) The theoretical yield is calculated from the amount of the limiting reactant present.
Which quantity is used to generate the error bars on a graph?
Uv gel enhancements rely on ingredients from the monomer liquid and ________ chemical family.
Uv gel enhancements rely on ingredients from the monomer liquid and acrylic chemical family.
Uv gel enhancements for nails rely on ingredients from the monomer liquid and the acrylic chemical family. The acrylic chemical family includes acrylic esters and acrylic acids, which are the main components of UV gel products. When these chemicals are exposed to UV light, they undergo a process called polymerization, which turns the liquid gel into a hard, durable coating on the nail. The monomer liquid contains molecules that are able to link together into long chains, forming a solid plastic when cured under UV light. This process is what allows the UV gel to harden and adhere to the nail surface, providing a long-lasting enhancement."Ow many sulfur atoms are in 1.10 mol of aluminum sulfide?
Aluminum sulfide is Al₂S₃, which shows that there are 3 sulfur atoms per formula unit.
In one mole there is Avogadro’s number of atoms and Avogadro’s number = 6.02 x 10²³
In 1.10 mole = 1.10 x 6.02x10²³ = 6.62 x 10²³ formula units
Now multiply with 3 to get number of sulfur atoms present in 1.10 mol of Aluminum sulfide;
3 x 6.62x10²³ = 1.99 x 10²⁴
So, the answer is 1.99 x 10²⁴ sulfur atoms.
1: Copper has an atomic number of 29
that means there are 29 protons in the nucleus of each upper atom. That's what the atomic nuber is; the number of protons in an atom of a ceartain element
if one copper atom contains 29 protons, how many electrons are there in 4 atoms of copper?
2: Copper has an atomic number of 29
that means there are 29 protons in the nucleus of each upper atom. That's what the atomic nuber is; the number of protons in an atom of a ceartain element
if one copper atom contains 29 protons, how many copper atoms could you make out of 87 protons?
Copper has an atomic number of 29, 4 copper atoms contain 116 electrons, while 3 copper atoms can be formed from 87 protons.
The atomic number of an element tells us the number of protons in an atom of that element.
1. Since copper has an atomic number of 29, each copper atom has 29 electrons as well. To find the total number of electrons in 4 atoms of copper, we can simply multiply the number of electrons in one copper atom by 4.
So, there are 4 [tex]\times[/tex] 29 = 116 electrons in 4 atoms of copper.
2. Since each copper atom has 29 protons, we can divide the total number of protons by 29 to find the number of copper atoms that can be made.
[tex]\dfrac{87}{29} = 3[/tex]
So,87 protons can make 3 copper atoms.
Therefore, there are 116 electrons in 4 atoms of copper and 3 copper atoms can be made out of 87 protons, respectively.
Learn more about atomic number here:
https://brainly.com/question/16858932
#SPJ6
The scientist most often credited with the idea that a quantum of light (photon) can act as a particle is:
a. Schrödinger
b. de Broglie
c. Einstein
d. Heisenberg
Answer:
c. Einstein
Explanation:
Einstein is most credited with the idea that a quantum of light (photon) can act as a particle. He proposed that light behave as photons or quantum of energy and used it to explain the Photoelectric Effect for which he received the Noble prize. Prior to that light was believed to behave as a wave or electromagnetic radiation only. However, photoelectric effect showed that light has particle nature as well.
What is the product of (2.324X1.11 cm) expressed to the correct number of significant figures
A __________ bond is a chemical bond between atoms with similar electronegativities; a sharing bond; valence electrons are shared.
Answer: This is known as non-polar covalent bond.
Explanation:
A covalent bond is formed when sharing of electrons takes place between the atoms forming a bond.
A polar covalent bond is formed when the atoms forming a bond have significant difference in electronegativities. This leads to the formation of poles in the atoms. For Example: HCl
A non-polar covalent bond is formed when the atoms forming a bond dpes not have significant difference in electronegativities or have similar electronegativity. For Example: [tex]H_2[/tex]
Hence, the bond is known as non-polar covalent bond.
Which statement best describes the ideas of two scientists who studied properties of light? Newton and Maxwell had similar ideas about light being made of particles. Hertz extended Maxwell’s idea that light is produced by the interaction of electric and magnetic fields. Young supported Newton’s idea of the wave theory of light after observing light spread out in all directions. Huygens agreed with Maxwell that light has properties of both particles and waves.
Hertz extended Maxwell’s idea that light is produced by the interaction of electric and magnetic fields.
Answer:
Hertz extended Maxwell’s idea that light is produced by the interaction of electric and magnetic fields.
Explanation:
According to Maxwell electromagnetic waves propagated perpendicular to the direction of the oscillating mutually perpendicular electric and magnetic field. This electromagnetic disturbance could move through vacuum with the speed of light and had wave like properties.
Hertz designed experiments which proved Maxwell's idea: the electromagnetic nature of light.
When using a light microscope, if you want the field of view to be larger, you would use
Answer:
The correct answer will be- low power objective lens.
Explanation:
In a light microscope, two types of lenses are used:
1. Ocular lens- the lens near to the eye of a viewer
2. Objective lens- The lens near the object.
Since the field of view decreases with increasing the objective power of the lens, therefore one wants to observe the large field of view than one should use low power of objective lens that is 4x.
Thus, the low power objective lens is the correct answer.