The temperature of water is cooler in deep oceans. The temperature there goes to 0°C to -3°C below which the water freezes. The water on the surface of the oceans and deep inside it varies because of the difference in energy of the two layers. One of the widest use of cold water is air conditioning. Cold water has a higher density than warm water. Water gets colder with profundity since chilly, salty sea water sinks to the base of the sea beds underneath the less dense hotter water close to the surface.
How does one determine the number of core electrons an atom has?
O
A. Subtract the atomic number from the atomic mass.
O
B. Subtract the group number from the atomic number.
O
C. Add the atomic number and the number of valence electrons.
O
D. Add the group number and the period number.
The one to determine the number of core electrons an atom has To subtract the group number from the atomic number. Therefore, option B is correct.
What is an atomic number ?The charge number of an atomic nucleus is the chemical element's atomic number, also known as nuclear charge number. This is the number of protons present in the nucleus of each atom of that element, or the proton number, for conventional nuclei. Ordinary chemical elements can be uniquely identified by their atomic number.
The number of protons in an atom is the atomic number. It is sometimes referred to as the proton number for this reason. The capital letter Z is used to represent it in calculations. The word zahl, which meaning number of numerals in German, is where the letter Z originates.
The atomic number, or number of protons, is displayed in the upper left. The element's letter sign appears in the centre.
Thus, option B is correct.
To learn more about an atomic number, follow the link;
https://brainly.com/question/16858932
#SPJ2
1. How does the period (row) in which an element is located relate to the number of shells that contain electrons?
2. How does the group (column) in which an element is located relate to the number of valence electrons in its outer shell?
3. The elements in Group 18 are known as noble gases.
In terms of their electron configurations, what do the noble gases all have in common?
1. The period number tells us about the number of shells in an element(for example Na located in third period has three electron shells)
2. Group number tells us the amount of electrons present in the valence shell thus also tells us about the ionic charges they form
3. They all have a stable electronic configuration with complete valence shells hence they also don't form ions.
Final answer:
The period of an element denotes the number of electron shells, while the group indicates the number of valence electrons. Group 18 elements, noble gases, share the common trait of having a full valence shell, making them non-reactive.
Explanation:
Understanding Periods and Groups on the Periodic Table
1. The period (row) in which an element is located corresponds to the number of electron shells that contain electrons. Elements in the same period have the same number of shells, with the number of electrons increasing as you move from left to right across the table.
2. The group (column) identifies the number of valence electrons in an element's outer shell. For example, all Group 1 elements have one valence electron, whereas Group 17 elements have seven valence electrons, which is significant for their chemical properties and reactivity.
3. The elements in Group 18, known as the noble gases, have a common characteristic in their electron configurations: they all have filled outer electron shells. This complete valence shell renders them very stable and non-reactive, thus they are also called inert gases.
1. What is the primary source of energy used by
producers during photosynthesis?
A. thermal energy from the sun
B. light energy from the sun
C. chemical energy from food and oxygen
D. chemical energy from carbon dioxide and
water
Answer:
b
Explanation:
In photosynthesis, light energy from the sun is harvested and it is converted into chemical energy. The primary source of energy used by producers during photosynthesis is light energy from the sun. The correct option is B.
What is photosynthesis?The process which takes place in the chloroplasts through photosynthetic pigments like chlorophyll a, chlorophyll b, carotene and xanthophyll to synthesize nutrients by using carbon dioxide, water and sunlight is known as the photosynthesis.
The plants use light energy to convert carbon dioxide and water into glucose and oxygen. This sugar molecules are used by the green plants as the energy source which helps them to grow.
The process photosynthesis is also exhibited by the algae, cyanobacteria, etc. to convert solar energy into chemical energy. Light is the major factor which complete this process.
Thus the correct option is B.
To know more about photosynthesis, visit;
https://brainly.com/question/29775046
#SPJ6
Determine the volume of 12.3 grams of formaldehyde gas at STP?
Answer: 9.18 L
Explanation: Solution attached.
Convert mass of CH2O to moles
Derive V from PV= nRT
Substitute the values.
Which statements best describe the process of radioactive decay? Check all that apply.
An unstable isotope changes until it reaches a different element that is stable.
An unstable isotope changes until it reaches a different isotope of the same element that is stable.
Explanation:
Radioactive decay is the breakdown of an unstable (heavier) atom into stable (lighter) atom. It mainly involves the loss of atomic nucleic particles such as protons and neutrons. If protons are lost in the decay, then the element of the atom will change. However, if only a few neutrons are lost, the element may remain the same but the products will be a more stable isotope of the same element with fewer neutrons (hence also mass number)
Learn More:
For more on radioactive decay check out;
https://brainly.com/question/1770619
https://brainly.com/question/10745621
#LearnWithBrainly
The statements that best describe the process of radioactive decay are:
An unstable isotope changes until it reaches a different element that is stable.An unstable isotope changes until it reaches a different isotope of the same element that is stable.The statements that best describe the process of radioactive decay are:
1. An unstable isotope changes until it reaches a different element that is stable.
- This statement is correct. Radioactive decay involves the transformation of an unstable isotope into a different element, which can be stable.
2. An unstable isotope changes until it reaches a different isotope of the same element that is unstable.
- This statement is also correct. In some cases, the process of radioactive decay can lead to the formation of a different isotope of the same element, and this isotope may remain unstable.
The other statements are not accurate:
- An unstable isotope changes until it reaches a different isotope of the same element that is unstable.
- An unstable isotope changing into a different element that is unstable is not a common outcome of radioactive decay.
- A stable isotope does not change into a different element through radioactive decay.
In summary, radioactive decay involves the transformation of unstable isotopes into different elements or isotopes, which can be either stable or unstable.
For more such questions on radioactive decay:
https://brainly.com/question/1770619
#SPJ3
The probable question may be:
Which statements best describe the process of radioactive decay? Check all that apply.
An unstable isotope changes until it reaches a different element that is unstable.
An unstable isotope changes until it reaches a different element that is stable.
A stable isotope changes until it reaches a different element that is unstable.
A stable isotope changes until it reaches a different element that is stable.
An unstable isotope changes until it reaches a different isotope of the same element that is unstable.
An unstable isotope changes until it reaches a different isotope of the same element that is stable.
46.
How many liters of O2 are needed to react completely with 60 L of H2S at STP (please show your work)
2H2S(g) + 3O2(g)—>2SO2(g) + 2H2O(g)
Answer : The volume of [tex]O_2[/tex] gas needed are, 90 L
Explanation : Given,
Volume of [tex]H_2S[/tex] = 60 L
Now we have to determine the volume of [tex]O_2[/tex] needed.
As we know that at STP, 1 mole of gas contains 22.4 L volume of gas.
The given balanced chemical reaction is:
[tex]2H_2S(g)+3O_2(g)\rightarrow 2SO_2(g)+2H_2O(g)[/tex]
By the stoichiometry we can say that, 2 moles of [tex]H_2S[/tex] react with 3 moles of oxygen gas to give 2 moles of [tex]SO_2[/tex] gas and 2 moles of water vapor.
From the balanced reaction we conclude that,
As, [tex]2\times 22.4L[/tex] volume of [tex]H_2S[/tex] react with [tex]3\times 22.4L[/tex] volume of [tex]O_2[/tex] gas
So, [tex]60L[/tex] volume of [tex]H_2S[/tex] react with [tex]\frac{3\times 22.4L}{2\times 22.4L}\times 60L=90L[/tex] volume of [tex]O_2[/tex] gas
Thus, the volume of [tex]O_2[/tex] gas needed are, 90 L
What is the maximum number of orbitals with: n = 4, L= 1
Answer:3
Explanation: I
'm not sure
The maximum number of orbitals with n = 4, L = 1 is 16, distributed among s, p, d, and f subshells.
There can be a total of 16 orbitals. These include: one 4s orbital, three 4p orbitals, five 4d orbitals, and seven 4f orbitals. Each subshell has a specific number of orbitals based on the values of ml.
The student has asked about the maximum number of orbitals with n = 4 and L= 1. In quantum chemistry, the principal quantum number n determines the shell, and the azimuthal or angular momentum quantum number L (also denoted as l) determines the subshell type. For n = 4, l can have values of 0 (s subshell), 1 (p subshell), 2 (d subshell), and 3 (f subshell). When l = 1, which is the p-type subshell, the magnetic quantum number ml can have three values: -1, 0, and +1. Thus, there are three orbitals corresponding to the p subshell when n = 4 and l = 1, namely the 4p orbitals.
PLEASE ANSWER
How are wavelength and frequency related?
A. If the distance between the crests of the waves decrease, the frequency decreases.
B. If the speed between the crests of the waves decreases, the frequency increases.
C. If the speed between the crests of the waves increases, the frequency increases.
D. If the distance between the crests of the waves increase, the frequency decreases.
Answer:
D. If the distance between the crests of the waves increase, the frequency decreases.
Explanation:
Wavelength is the distance between two successive crests and troughs while frequency is the number of complete cycle per seconds
Velocity = Frequency × wavelength
Frequency and wavelength are inversely proportion
Final answer:
Wavelength and frequency are inversely related. As the distance between the crests of the waves increases (wavelength increases), the frequency decreases. The correct answer is D.
Explanation:
The question asks how wavelength and frequency are related. The relationship between wavelength and frequency is an important concept in physics, particularly in the study of waves. Wavelength and frequency are inversely related, meaning as one increases, the other decreases. This inverse relationship is explained by the equation c = λν, where c is the speed of the wave, λ (lambda) is the wavelength, and ν (nu) is the frequency. Therefore, if the distance between the crests of the waves increases, which means the wavelength increases, the frequency of the waves decreases since the number of waves passing a given point per unit time becomes fewer.
Given this explanation, the correct answer to the question is: D. If the distance between the crests of the waves increases, the frequency decreases. This is because the increase in distance between crests (increase in wavelength) leads to a reduction in how many waves can pass a given point in a specific amount of time (decrease in frequency).
What is the mole fraction of solute in a 3.73 m aqueous solution
Answer:
it is 0.0572
Hope you will find my answer helpful
To find the mole fraction of the solute in a 3.73 m aqueous solution, one must calculate the moles of solute and solvent. Upon doing so, the mole fraction is determined by dividing the moles of solute by the total moles of the mixture. The approximate mole fraction for the solute in this case is 0.063.
Explanation:To calculate the mole fraction of solute in a 3.73 m aqueous solution, we need to know both the number of moles of the solute and the solvent. The given information indicates that we have 3.73 mol of solute (e.g., NaCl) per 1 Kg of water (solvent).
In this example, we calculate the number of moles of water using its molar mass, which is approximately 18.015 g/mol. Since we have 1.0 kg (or 1000 g) of water, we divide the mass by the molar mass to get the moles of water: 1000 g / 18.015 g/mol ≈ 55.5 mol. Now, we have the necessary information to calculate the mole fraction.
The mole fraction is the moles of solute divided by the total moles of both solute and solvent. Using the moles we found earlier:
Mole fraction of NaCl = Moles of NaCl / (Moles of NaCl + Moles of H₂O)So, the mole fraction of the solute is approximately 0.063.
How much energy is required to heat a frozen can of juice (360 grams- mostly water) from 0 degrees Celsius ( the temperature of an overcooled refrigerator) to 110 degrees ( the highest practical temperature within a microwave oven)?
Answer:
1,100,160J or 262.94 kcal
Explanation:
The juice is frozen at 0 degrees Celsius and I assume that it will become gas at 100 degrees Celsius. So we change the form of the water from solid to liquid, then to gas. That means we have to find out how much heat needed to change water form too, not only the heat needed to increase its temperature.
The latent heat of water is 4.2J/g °C while the heat of fusion is 334 J/g and the heat of vaporization is 2260 J/g. The energy needed will be:
360g * 4.2J/g °C * (110-0°C ) + 360g * 334 J/g + 360g * 2260 /g = 1,100,160J or 262.94 kcal.
Final answer:
The energy required to heat the frozen can of juice from 0 degrees Celsius to 110 degrees Celsius is 163.08 kJ.
Explanation:
To calculate the amount of energy required to heat the frozen can of juice, we need to consider three steps:
Heating the can from 0 degrees Celsius to its melting point, which is 0 degrees Celsius
Melting the ice at 0 degrees Celsius
Heating the water from 0 degrees Celsius to 110 degrees Celsius
The energy required for each step can be calculated using the formula Q = mcΔT, where Q is the energy, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
For the first step, Q = (360g)(4.18 J/g°C)(0 - 0) = 0 J.
For the second step, Q = (360g)(333.55 J/g)(0 - 0) = 0 J.
For the third step, Q = (360g)(4.18 J/g°C)(110 - 0) = 163,080 J = 163.08 kJ.
Adding up the energies from each step, the total energy required to heat the frozen can of juice is 163.08 kJ.
What are the values for standard temperature and pressure
Answer:
Standard Temperature and Pressure. Standard temperature is equal to 0 °C, which is 273.15 K. Standard Pressure is 1 Atm, 101.3kPa or 760 mmHg or torr. STP is the "standard" conditions often used for measuring gas density and volume.
The values of standard temperature and standard pressure are 273.15 K and 1 atmospheric pressure.
What is standard temperature and standard pressure?Standard temperature and pressure are defined as a standard set of conditions required for experimental measurements which are established to allow comparison between different sets of data.
Standards which are commonly used are those International Union of pure and applied chemistry and national institute of standards and technology.These are not universally accepted standards but are the ones which are commonly used.
Standard conditions of pressure and temperature are necessary to define standard reference conditions used to express volumes of liquids and gases.
These values are important to physicists, chemists ,engineers ,pilots and navigators.
Learn more about standard temperature and pressure,here:
https://brainly.com/question/14397025
#SPJ6
How many silver atoms are there in 3.78g of silver?
Answer:
2.11 * 10²² atoms of silver
Explanation:
There will be 2.11 × 10^22 atoms of silver in 3.78 g of silver.
What is molar mass?
The term "mole" refers to a unit of measurement used to describe the number of atoms, molecules, ions, or formula units in a given chemical compound. It is comparable to other counting units like a pair (2) and a dozen (12). Avogadro's number (6.02214076 ×10²³ mol) of molecules or formula units make up one mole of a substance.
The mass of 1 mole of a chemical and the number of grams per mole are determined by the compound's molar mass. In other terms, the molar mass is the sum of the masses of all the atoms that make up a mole of a certain molecule, expressed in grams. As a result, the molar mass is measured in grams/mole.
Therefore in this case,
3.78 g Ag = [tex]\frac{1 mol Ag}{ 107.8682}[/tex] ×/[tex]\frac{6.022 * 10^{23} atoms of Ag}{1 mol Ag }[/tex]
= 2.11 × 10²²
Therefore, 2.11 × 10²² atoms in this mass of silver.
Read more about molar mass, here
https://brainly.com/question/17010622
#SPJ2
What would happen of scientific knowledge was not debated and confirmed by scientist?
Answer: the world wouldn’t be the same today
Explanation:
i need helpppp! i don’t understand this
Answer: a. 410 K
b. 296 K
c. 394 K
d. -180 °C
e. 224°C
f. -3 °C
Explanation:
For °C to K : use °C + 273 = K
For K to °C : use °C = K - 273
How many parts per million of fluoride in a solution that is 500 grams of fluoride and 500,000 liters water
Final answer:
The fluoride concentration is 1 ppm for a solution of 500 grams of fluoride in 500,000 liters of water. Following the WHO's guidelines, an average person would ingest 1.92 milligrams of fluoride ion by drinking 1,920 mL of water at this concentration.
Explanation:
To calculate the concentration of fluoride in parts per million (ppm) for a solution that consists of 500 grams of fluoride in 500,000 liters of water, you can use the definition of parts per million. Parts per million is the ratio of solute-to-solution mass multiplied by 106. Therefore, you first need to convert the mass of fluoride from grams to milligrams and then divide by the total volume of solution in liters.
To get the mass of fluoride in milligrams, multiply 500 grams by 1000 (since there are 1000 milligrams in a gram). That gives you 500,000 milligrams. Next, since the volume of water is already in liters, we keep it as is. We then use the formula for ppm:
ppm = (mass of solute in mg) / (volume of solution in L)
Now, by substituting the values we have:
ppm = 500,000 mg / 500,000 L = 1 ppm
Assuming the World Health Organization's maximum recommended concentration of fluoride ion is 1.0 ppm, then an average person drinking 1,920 mL (1.92 liters) of this water would consume:
fluoride intake = concentration (ppm) × volume of water (L)
In milligrams, this becomes:
fluoride intake = 1 ppm × 1.92 L = 1.92 mg
Thus, an average person would ingest 1.92 milligrams of fluoride ion per day.
Which equation illustrates conservation of mass?
1. H2 + Cl2 - HC1
2. H I C12 — 2HC1
3.H2 + O2 - H20
4. H2 -02 - 2H20
According to law of conservation of mass, conservation of mass is illustrated by none of the equation as the number of atoms of reactants and products is not same in any equation.
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.
Learn more about law of conservation of mass,here:
https://brainly.com/question/28711001
#SPJ2
The table below shows properties of the element gold (Au).
Property Gold's
Characteristics
Color yellow
Density 19.32 g/mL
Electronegativity 2.54
Ionization Potential 9.225
Boiling Point 2807°C
Melting Point 1064.58°C
A physical property of gold is _______.
A.
density of 19.32 g/mL
B.
melting point of 1064.58°C
C.
boiling point of 2807°C
D.
all of these
Answer:
The answer is D~all of these
are there limits to each of the properties of metals
Answer:
Yes there is
Explanation:
For facts
The maximum limit of a metal to which the force applied will not leave any deformation, this limit is called as elastic limit. If the force is applied beyond the elastic limit the metal will retain the deformation.
what are the properties of metal ?A metal is an element that can easily form positive ions called cations and tends to make metallic bonds. Some of the important properties of metal are :
Elasticity of the metals by which the metal are able to regain the original shape and size even after the removal of the load; all cutting tools and metallic objects maintain their original shape due to this property.
Every metal has an optimal limit of deformation called as elastic limit, beyond this the metal will retain the deformation even after the removal of applied forces.
Plasticity is the another property of metal in which a permanent deformation occur without any fracture whenever it is subjected by external forces, it can be used in forming shaping an extruding operation.
Ductility is the property of metals in which they can be drawn into wires or elongated, it is completely depend on tenacity and hardness, it can be higher in cold condition; For example Gold, Platinum, silver, iron etc.
For more details regarding metal, visit:
https://brainly.com/question/18153051
#SPJ2
The Celsius temperature of a fixed mass of gas is increased from 2°C to 4°C while
the pressure remains constant. The volume of the gas will be:
half as much
O doubled.
the same.
increased slightly.
The volume of a gas that has its Celsius temperature increased from 2°C to 4°C, while the pressure remains constant, would increase slightly due to the principles of Charles's Law in physics.
Explanation:The concept behind this question is called Charles's Law from physics. This law states that the volume of a given mass of an ideal gas is directly proportional to its temperature on the absolute temperature scale (Kelvin), if pressure and the amount of gas remain unchanged.
In your case, the Celsius temperature of a fixed mass of gas is increased from 2°C to 4°C, a change of 2 degrees. In Kelvin this is a change from 275K to 277K since we add 273 to convert Celsius to Kelvin. Using Charles's Law, under these conditions, the volume of the gas would increase slightly, not significantly. As the change in temperature is very small, the change in the volume would also be small.
Learn more about Charles's Law here:https://brainly.com/question/16927784
#SPJ12
Increasing the temperature from 2°C to 4°C while keeping pressure constant will result in a slight increase in the gas's volume, according to Charles's law.
Explanation:The student's question is about what happens to the volume of a gas when its Celsius temperature is increased from 2°C to 4°C while the pressure remains constant.
Charles's law states that the volume of a gas is directly proportional to its temperature when the pressure is held constant. Hence, increasing the temperature in degrees Celsius – or more relevantly, in Kelvin – will also increase the volume of the gas slightly.
Since the increase in temperature from 2°C to 4°C is minimal (equivalent to an increase from 275.15K to 277.15K), the change in volume will be correspondingly small. Thus, the correct answer is that the volume of the gas will be increased slightly.
Learn more about Charles's law here:https://brainly.com/question/16927784
#SPJ2
calculate the [H3O+] of solutions a and b; calculate the [OH-] solutions c and d.
9. pH = 2.76
10. pH = 3.65
11. pOH = 3.65
12. POH = 6.87
Answer:
I got the answers but it won't let me post it correctly on here....
Explanation:
9.) 10-2.76 =0.0174 [H30+]= 1.74*10-3 M
10.)10-3.65=0.00224 [H3O+] =2.24*10-2 M
11.)10-3.65=0.00224 [OH-]= 2.224*10-4M
12.)10-6.87=0.00000135 [OH-]= 1.35*10-7M
The [H3O+] and [OH-] of solutions a, b, c, and d are calculated using the formulas for pH and pOH. The [H3O+] for solutions a and b come out to be 1.74 x 10^-3 M and 2.2 x 10^-4 M respectively, while the [OH-] for solutions c and d are 2.2 x 10^-4 M and 1.37 x 10^-7 M respectively.
Explanation:To calculate the [H3O+] and [OH-] in solutions, we need to use the formulas for pH and pOH. Where pH = -log[H3O+] and pOH = -log[OH-]. Therefore, for a solution with a given pH, [H3O+] can be calculated as [H3O+] = 10^-pH, and for a solution with a given pOH, [OH-] is calculated as [OH-] = 10^-pOH.
For solution a, pH = 2.76, [H3O+] = 10^-2.76 = 1.74 x 10^-3 M. Similarly, for solution b, pH = 3.65, [H3O+] = 10^-3.65 = 2.2 x 10^-4 M. For solution c, pOH = 3.65, [OH-] = 10^-3.65 = 2.2 x 10^-4 M. For solution d, pOH = 6.87, [OH-] = 10^-6.87 = 1.37 x 10^-7 M.
Learn more about Calculating [H3O+] and [OH-] here:https://brainly.com/question/4515368
#SPJ6
How is the electronegativity trend related to the first ionization energy trend?
O
A. Electronegativity decreases as you move up the table, whereas
ionization energy increases.
B. Electronegativity and first ionization energy both decrease as you
move up the periodic table.
O
C. Electronegativity increases as you move up the table, whereas
ionization energy decreases.
O
D. Electronegativity and first ionization energy both increase as you
move up the periodic table.
D. Electronegativity and first ionization energy both increase as you
move up the periodic table.
There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Therefore, the correct option is option D that is Electronegativity and first ionization energy both increase as you move up the periodic table.
What is periodic table?Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.
Periodic table help a scientist to know what are the different types of elements are present in periodic table so that they can discover the new elements that are not being discovered yet. Electronegativity and first ionization energy both increase as you move up the periodic table.
Therefore, the correct option is option D.
Learn more about periodic table, here:
https://brainly.com/question/11155928
#SPJ5
Help with this?Show work please :)
Answer: 3.2778x10-10 moles Ca
Explanation: solution
1.974x10-¹⁴ atoms Ca x 1 mole Ca/ 6.022x10²³ atoms Ca
= 3.278x10-10 moles Ca
water decomposes in an evacuated 2.00L container. If you started with 20.0 grams of water, determine the total resulting pressure of the two product gases if the reaction happens at 25°C.
Resulting pressure is 13.6 atm.
Explanation:
Using Ideal gas equation, we can find the pressure of the gases formed in the reaction.
PV = nRT
Number of moles, n = given mass / molar mass = 20 g / 18 g/mol
= 1.11 moles
Volume, V = 2 L
Temperature, T = 25°C + 273 = 298 K
R = gas constant = 0.08206 L atm K⁻¹ mol⁻¹
P = nRT/V
= 1.11×0.08206 ×298 / 2
= 13.6 atm
Aluminum reacts with sulfur to form aluminum sulfide according to the following reaction:
2 Al (s) + 3 S (s) → Al2S3 (s)
How many moles of sulfur will be need to produce 6 moles of aluminum sulfide?
a.
2 mol S
b.
3 mol S
c.
12 mol S
d.
15 mol S
e.
18 mol S
Answer:
Explanation:
x mol 6 mol
2 Al (s) + 3 S (s) → Al2S3 (s)
3 mol 1 mol
6 mol Al2S3 x 3 mol S/ 1 mol Al2S3 = 18 mol S
Which branch of chemistry involves carbon-based molecules?
Answer: Organic chemistry
Explanation:
A geologist is studying an area where stream erosion and deposition are the dominant surface processes. He notices that all of the rock layers in the shallow streambeds have dune features preserved throughout them. Knowing that dunes are formed by the wind in desert settings, what can the geologist conclude about the geologic history of this area? A. The depositional environment has changed from stream-dominated in the past to wind-dominated today. B. Wind must still be the dominant factor shaping the surface today. C. Dunes must also form from streams, at least in this area. D. The depositional environment has changed from wind-dominated in the past to stream-dominated today.
Answer: A)
Explanation:
the deposition environment has changed from wind-dominated in the past to stream-dominated today.
Final answer:
The presence of dune features in the streambeds suggests that the geologic history of the area involved a change in the depositional environment from wind-dominated to stream-dominated over time.
Explanation:
The geologist studying the presence of dune features in streambeds can conclude about the geologic history of the area that there has been a change in the depositional environment. Specifically, the correct answer is D.
The depositional environment has changed from wind-dominated in the past to stream-dominated today. This conclusion is based on the understanding that dunes, with their characteristic cross-bedding patterns, are typically formed by wind in desert environments.
Thus, finding these dune features preserved in current streambeds indicates that the area was once a desert with active wind erosion and deposition, but now it is characterized by stream erosion and deposition.
Erosion and deposition are dynamic processes that reflect changes in Earth's surface through time. The study of sedimentary structures like cross-bedding is fundamental in reconstructing paleoenvironments and understanding how the forces of wind, water, and other elements have shaped the landscape.
Recognizing cross-bedding patterns within sediments allows geologists to determine the direction of the ancient winds or water flows that created them.
5. What is the temperature -34°C expressed in kelvins?
A. 207 K
B. 339 K
C. 239
D. 139 K
Answer:
C. 239
Explanation:
-34 + 273.15 = 239.15
The equation to convert celsius into kelvin is C = K - 273.15
Type of Compound?
Electrolyte or
Non-electrolyte?
NaCl
CO2
Al2O3
H2O2
CaF2
NaCl, H₂O₂ and CaF₂ are electrolytes, whereas CO₂ and Al₂O₃ are non-electrolytes.
Explanation:
An electrolyte is a liquid or solution contains ions which may be decomposed by means of electrolysis.
NaCl dissociates into Na⁺ and Cl⁻ ions in solution is an electrolyte.
CO₂ is a Non-electrolyte.
Al₂O₃ is a Non-electrolyte.
H₂O₂ is an electrolyte
CaF₂ is an electrolyte
Final answer:
The compounds NaCl are electrolytes because they are ionic and can dissociate into ions in solution or when molten. CO are molecular compounds and do not dissociate into ions when dissolved in water, making them non-electrolytes.
Explanation:
The question is asking whether certain compounds are electrolytes or non-electrolytes. An electrolyte is able to conduct electricity when dissolved in water because it separates into ions that are mobile and can move from one electrode to the other. In contrast, a non-electrolyte does not dissociate into ions and hence does not conduct electricity in solution.
NaCl (sodium chloride) is an ionic compound composed of sodium and chlorine. When it dissolves in water, it dissociates into Na+ and Cl- ions. As such, it is an electrolyte.[tex]CO_{2}[/tex] carbon dioxide) is a molecular compound and does not dissociate into ions when dissolved in water, so it is a non-electrolyte.[tex]Al_{2} 0_{3}[/tex] (aluminum oxide) is ionic, but it is not very soluble in water. It can, however, be considered an electrolyte in its molten state.[tex]H_{2} O_{2}[/tex](hydrogen peroxide) is a molecular compound and does not dissociate into ions in solution, therefore it is a non-electrolyte. (calcium fluoride) is ionic and can be considered an electrolyte as it would dissociate into Ca2+ and F- ions if it were to dissolve in water.chemistry questions?
Answer:
no <3
Explanation:
10.222 g sample of hydrated barium iodide (Bal) is heated to dry off the water of
crystallization. The dry sample has a mass of 9.520 g. What is the formula of the
hydrate
Answer:
BaI₂.5H₂O
Explanation:
Given Data:
Mass of Hydrated BaI₂ = 10.222 g
Mass of dried BaI₂ = 9.520 g
Mass of Water removed = 10.222-9.520 = 0.702 g
M.Mass of BaI₂ = 391.136 g/mol
M.Mass of Water = 18.02 g/mol
Now,
Calculate moles of dried BaI₂ as,
Moles = Mass / M.Mass
Moles = 9.520 g / 391.136 g/mol
Moles = 0.02434 moles
Calculate moles of Water as,
Moles = Mass / M.Mass
Moles = 0.702 g / 18.02 g/mol
Moles = 0.0389 moles
Then,
Calculate Mole ratio of BaI₂ and water as,
= 0.02434 moles BaI₂ / 0.0389 moles Water
= 0.625
Now,
We will convert this mole ratio to a whole number by multiplying it with a nearest integer,
= 0.625 × 8
= 5
Hence, this means for every one mole of BaI there are 5 moles of Water.
Result:
BaI₂.5H₂O