Answer:
The bond angle between the p orbital is assumed to be 90 degrees But according to VSEPR theory, as molecular geometry is a little bit bent thus the angle is less than 109.5 degrees.
Explanation:
IN hydrogen sulfide, H_2 S, both hydrogen atoms consist of para-magnetic 1s orbital while sulfur consists of diamagnetic 3s and 2 para magnetic 3p orbital.
The bond angle between the p orbital is assumed to be 90 degrees But according to VSEPR theory, as molecular geometry is a little bit bent thus the angle is less than 109.5 degrees.
In hydrogen sulfide (H2S), the bonding is explained using valence bond theory. The bond angle in H2S is approximately 92 degrees.
Explanation:In hydrogen sulfide (H2S), the bonding can be explained using valence bond theory. According to this theory, covalent bonds are formed by the overlap of atomic orbitals. In H2S, the sulfur atom forms a covalent bond with each hydrogen atom through overlap of its sp3 hybrid orbital and the hydrogen 1s orbital.
The predicted bond angle in H2S is approximately 92 degrees. This angle is less than the ideal tetrahedral angle of 109.5 degrees due to the presence of two lone pairs of electrons on the sulfur atom, which exert greater repulsion than the bonding pairs. This results in a distorted tetrahedral shape with a smaller bond angle.
Learn more about Hydrogen sulfide bonding here:https://brainly.com/question/12053543
#SPJ3
Calculate the energy of attraction between a cation with a valence of 1 and an anion with a valence of 3 the centers of which are separated by a distance of 7.5 nm
The energy of attraction between a cation with a valence of 1 and an anion with a valence of 3 can be calculated using Coulomb's law.
Explanation:The energy of attraction between a cation and an anion can be calculated using Coulomb's law. Coulomb's law states that the energy of attraction is directly proportional to the product of the charges and inversely proportional to the distance between them. In this case, the cation has a valence of +1 and the anion has a valence of -3. The distance between their centers is given as 7.5 nm. The equation to calculate the energy of attraction is:
E = k * (q1 * q2) / r
Where E is the energy of attraction, k is Coulomb's constant (9 x 10^9 Nm^2/C^2), q1 and q2 are the charges of the cation and anion respectively, and r is the distance between their centers.
Substituting the values:
E = (9 x 10^9 Nm^2/C^2) * ((+1) * (-3)) / (7.5 x 10^-9 m)
Simplifying the equation gives:
E = -36 Nm
Learn more about Energy of attraction here:https://brainly.com/question/31865959
#SPJ3
Shells constructed from seawater incorporate the 18O/16O ratio of seawater during their lifetime within their CaCO3 shell walls, providing a paleothermometer that is used to estimate the temperatures of ancient seas.
Answer:
Hello, the above question is not complete, nonetheless let us check somethings out.
Explanation:
Paleothermometer definition is from two words, that is "Paleo" which means something that is old and ''thermometer" which is an instrument for measuring temperature. So, if we add this up, Paleothermometer is an instrument for measuring "old" temperature, that is temperature. One of the Paleothermometer that is been used is the δ18O which is the one in the question that has isotopic ratio of 18O/16O, and it deals with the measurement of 18O to 16O. The others include Alkenones Paleothermometer, Mg/Ca Paleothermometer, Leaf physiognomy and so on.
If the values of the isotopic ratio that is 18O/16O ratio is low, then the temperature is high. To Calculate the 18O/16O ratio for ancient ocean then we will be using the equation below;
δ18O = (z - 1) × 1000. Where z= [(18O/16O)/( 18O/16O)sm. And sm= standard mean.
Suppose in the lab you measure the solid NaOH and dissolve it into 100.0 mL of water. You then measure 0.2000 g of KHP (KC8H5O4, 204.22 g/mol) and place it in a clean, dry 100-mL beaker, and then dissolve the KHP in about 25 mL of water and add a couple of drops of phenolphthalein indicator. You titrate this with your NaOH(aq) solution and find that the titration requires 9.53 mL of NaOH(aq).
a. What is the concentration of your NaOH(aq) solution?
b. Determine the number of moles of NaOH(aq) that would be required to titrate 250.00 mL of your Kool-Aid solution.
Answer:
Explanation:
Equation of the reaction:
NaOH(aq) + KHC8H4O4(aq) --> KNaC8H4O4(aq) + H2O(l)
A.
Number of moles = mass/molar mass
= 0.20/204.22
= 9.79 x 10-4 mol KHP
By stoichiometry, 1 mole of NaOH reacts with 1 mole of KHP
= 6.267 x 10-4 mol NaOH
Molar concentration = number of moles/volume
= 9.79 x 10-4/0.00953
= 0.103 M NaOH
B.
Number of moles of kool aid = mass/molar mass
= 3.607/342
= 0.01055 mol
Concentration = 0.01055/0.005
= 2.1 M
C1 * V1 = C2 * V2
Concentration of NaOH = 2.1 * 0.005/0.01079
= 0.977 M
Number of moles of NaOH = 0.0105 mol.
Which of the quantum numbers relate(s) to the electron only? Which relate(s) to the orbital?
Answer:
Schrodinger's proposal, considered as the 5th atomic model, is to describe the characteristics of all the electrons in an atom, and for this I use what we know as quantum numbers.
Quantum numbers are called with the letters n, m, l and s and indicate the position and energy of the electron. No electron of the same atom can have the same quantum numbers.
Explanation:
n = main quantum number, which indicates the level of energy where the electron is, assumes positive integer values, from 1 to 7 and it is related to the orbital too.
I = secondary quantum number, which indicates the orbital in which the electron is located, can be s, p, d and f (0, 1, 2 and 3).
m = magnetic quantum number, represents the orientation of the orbitals in space, or the type of orbital, within a specific orbital. Assumes values of the negative secondary quantum number (-l) through zero, to the positive quantum number (+ l).
s = quantum number of spin, which describes the orientation of the electron spin. This number takes into account the rotation of the electron around its own axis as it moves around the nucleus. Assumes only two values +1/2 and - 1/2
When the submarine's density is equal to the density of the surrounding seawater, the submarine will maintain depth. If a 103200 kg submarine takes on 2100 kg of water to maintain depth at 1000 feet, where the density of seawater is approximately 1033 kg/m3, what is the total displacement (volume) of the submarine in m3 (Report your answer to 4 sig figs without a written unit)?
Answer:
[tex]2.023 m^3[/tex] is the total displacement (volume) of the submarine.
Explanation:
Mass of water carried by submarine at 1000 ft depth = m = 2100 kg
The density of seawater at 1000 ft depth = d = [tex]1033 kg/m^3[/tex]
Volume of the water displaced = V= ?
Total displacement of the submarine = Volume of the water displaced = V
[tex]Density=\frac{Mass}{Volume}[/tex]
[tex]V=\frac{m}{d}=\frac{2100 kg}{1033 kg/m^3}=2.023 m^3[/tex]
[tex]2.023 m^3[/tex] is the total displacement (volume) of the submarine.
In order to prepare a solution of 600 mg O2/L of COD, how much glucose should be dissolved in distilled water?
Answer:
1.126 grams
Explanation:
Given that:
Standard Solution = 600 mg O₂/L
The molecular weight of C₆H₁₂O₆ (glucose) = 180.156 g/mol
The mass of O₂ in 1 mole of C₆H₁₂O₆ can be determined as:
C₆H₁₂O₆ = 6 × 16 g ( of one oxygen)
= 96 g
∴ 96 g of O₂ is available in 180.156 gram of C₆H₁₂O₆
Thus C₆H₁₂O₆ required for giving 600 mg = 0.60 g of O₂
∴ [tex]\frac{180.156}{96}*0.6[/tex]
= 1.876625 × 0.6
= 1.125975 g
≅ 1.126 grams
Hence, 1.126 grams of C₆H₁₂O₆ (glucose) will be added to one liter of distilled water in order to get 600mg O₂/L.
A 0.4 M buffer solution was prepared with acetic acid and sodium acetate. At pH 5.5, what are the concentrations of acetic acid and acetate ion? The pKa of acetic acid is 4.76. Round the answers to two decimal places. State the units.
Answer: The concentration of acetic acid and sodium acetate (acetate ion) is 0.06 M and 0.34 M respectively
Explanation:
We are given:
Concentration of buffer solution having acetic acid and sodium acetate = 0.4 M
Let the concentration of acetic acid be x M
So, the concentration of sodium acetate will be = (0.4 - x) M
To calculate the concentration of acid for given pH, we use the equation given by Henderson Hasselbalch:
[tex]pH=pK_a+\log(\frac{[salt]}{[acid]})[/tex]
[tex]pH=pK_a+\log(\frac{[CH_3COONa]}{[CH_3COOH]})[/tex]
where,
[tex]pK_a[/tex] = negative logarithm of acid dissociation constant of acetic acid = 4.76
[tex][CH_3COONa]=0.4-x[/tex]
[tex][CH_3COOH]=x[/tex]
pH = 5.5
Putting values in above equation, we get:
[tex]5.5=4.76+\log(0.4-x}{x})\\\\x=0.062M[/tex]
So, concentration of acetic acid = x = 0.06 M
Concentration of sodium acetate = (0.4 - x) = (0.4 - 0.06) = 0.34 M
Hence, the concentration of acetic acid and sodium acetate (acetate ion) is 0.06 M and 0.34 M respectively
What is the molality of an aqueous KCl solution with a mole fraction of KCl, XKCl = 0.175? (The molar mass of KCl = 74.55 g/mol and the molar mass of H2O is 18.02 g/mol.)
Final answer:
The molality (m) of an aqueous KCl solution with a mole fraction of KCl, XKCl = 0.175, can be calculated using the formula molality (m) = (moles of solute) / (kilograms of solvent). First, calculate the moles of KCl by multiplying the mole fraction by the mass of water and dividing by the molar mass of KCl. Then, calculate the kilograms of water by dividing the mass of water by 1000. Finally, substitute these values into the molality formula.
Explanation:
The molality (m) of an aqueous KCl solution with a mole fraction (XKCl) of 0.175 can be calculated using the following formula:
molality (m) = (moles of solute) / (kilograms of solvent)
To find the molality, we need to convert the mole fraction into moles of KCl and kilograms of water. The molar mass of KCl is 74.55 g/mol and the molar mass of H2O is 18.02 g/mol.
First, we calculate the moles of KCl:
moles of KCl = XKCl * (mass of water) / (molar mass of KCl)
Next, we calculate the kilograms of water:
kilograms of water = (mass of water) / 1000
Finally, we substitute these values into the formula:
molality (m) = moles of KCl / kilograms of water
A saline solution contains 0.770 gg of NaClNaCl (molar mass = 58.55 g/molg/mol) in 133 mLmL of solution. Calculate the concentration of NaClNaCl in this solution, in units of molarity.
Answer:
0.104 M
Explanation:
A saline solution contains 0.770 g of NaCl (molar mass = 58.55 g/mol) in 133 mL.
The molar mass of the solute (NaCl) is 58.55 g/mol. The moles corresponding to 0.770 g are:
0.770 g × (1 mol/55.85 g) = 0.0138 mol
The volume of solution is 133 mL. In liters,
133 mL × (1 L/1000 mL) = 0.133 L
The molarity of NaCl is:
M = moles of solute / liters of solution
M = 0.0138 mol / 0.133 L
M = 0.104 M
At a certain temperature this reaction follows second-order kinetics with a rate constant of : Suppose a vessel contains at a concentration of . Calculate the concentration of in the vessel seconds later. You may assume no other reaction is important. Round your answer to significant digits.
To calculate the concentration of a second-order reaction after a certain time, use the half-life equation and substitute the given values.
Explanation:A second-order reaction follows the equation relating the half-life of the reaction to its rate constant and initial concentration:
t1/2 = 1 / (k * [A]₀)
To calculate the concentration of A in the vessel after a certain number of seconds, you can substitute the given values into this equation. For example, if t1/2 = 18 min, k = 0.0576 L mol-1 min-1, and [A]₀ = 0.200 mol L-1, you can solve for [A].
Learn more about second-order reaction here:https://brainly.com/question/1769080
#SPJ12
The concentration in the vessel seconds later is ≈ 0.179 M which will be required for 0.200 M and a rate constant of 5.76 × 10-² L/mol/min over 10 minutes.
To solve this question, we can use the integrated rate law for second-order reactions:
[tex]\frac{1}{[A]t} = \frac{1}{[A]_0} + kt[/tex]
The initial concentration, [tex][A]_0[/tex], is 0.200 M.The rate constant, k, is 5.76 × 10-2 L/mol/min.The time elapsed, t, is 10.0 min.Substitute these values into the integrated rate law equation:
[tex]\frac{1}{[A]t} = \frac{1}{0.200} + (5.76 \times 10^{-2} L/mol/min)(10.0 min)[/tex]
Calculate the right-hand side:
[tex]\frac{1}{[A]t} = 5.00 + 0.576 \\\\\frac{1}{[A]t} = 5.576[/tex]
So, [tex][A]t = 1 / 5.576 \approx 0.179 M[/tex]
Therefore, the concentration of butadiene remaining after 10.0 min is approximately 0.179 M.
Which of the following statements about entropy is true? a) Entropy is a measure of system multiplicity. b) The standard unit of entropy is kcal/mol. c) Entropy cannot be visualized in terms of disorder. d) In general, the entropy of a protein increases during folding
Answer:
The correct answer is d.
Incorrect Answers:
Options a, b and c are incorrect answers because during folding of protein, surface area decreases and so there are less water molecules involved.The water molecules are free.The protein folding decreases entropy
For each of the following pairs of solutes and solvent, predict whether the solute would be soluble or insoluble. After making your predictions, you can check your answers by looking up the compounds in the Merck Index or the CRC Handbook of Chemistry and physics. Generally, the Merck Index I the easier reference book to use. If the substance has a solubility greater than 40mg/mL, you may conclude that it is soluble.
a.Malic acid in water: Soluble
b.Naphthalene in water: Insoluble
c.Amphetamine in ethyl alcohol: Insoluble
d.Aspirin in Water: Insoluble
e.Sucinic Acid in Hexane: Insoluble
f.Ibuprofen in Diethyl Ether: Insoluble
g.1-Decanol in Water: Slightly soluble because of OH
Answer and Explanation
The major rule of Solubility is that, 'like dissolves like', that is, polar solutes dissolve in polar solvents and non-polar solute dissolve in non-polar solvents. Polar solutes will not dissolve in non-polar solvents & vice-versa.
a) Malic Acid in Water - Soluble
Malic Acid, C₄H₆O₅, has a solubility of 558g/L in water at 25°C.
558 g/L = 558 mg/mL >> 40 mg/mL. This indicates that Malic Acid is very soluble in water.
Malic Acid is a dicarboxylic acid, therefore, it is a polar compound which is expected to be soluble in water as short chained polar organic compounds like itself are soluble in water.
b) Naphtalene in Water - Insoluble
Naphtalene, C₁₀H₈ has a solubility of 31.6 mg/L In water at 25°C.
31.6 mg/L = 0.0316 mg/mL <<< 40 mg/mL. This indicates that Naphtalene is very insoluble in water.
The insolubility of Naphtalene can be explained by the very non-polar nature of the organic compound.
c) Amphetamine in ethyl alcohol - Insoluble
Amphetamine, C₉H₁₃N has a solubility of 0.0165 g/mL in ethyl alcohol at 25°C.
0.0165 g/mL = 1.65 mg/mL << 40mg/mL
Amphetamine contains one benzene ring and one amine group. Even though, amine group makes the compound polar, the benzene ring and hydrocarbon chain overwhelm the polarity and cause amphetamine to be non-polar. Ethyl alcohol is polar due to having an alcohol functional group. By applying ‘Like dissolve like’, amphetamine is insoluble in ethyl alcohol.
d) Aspirin in water - Insoluble
Aspirin, C₉H₈O₄ has a solubility of 3mg/mL in water at 25°C.
3mg/mL << 40 mg/mL.
Aspirin contains one benzene ring, one carboxylic acid group and one carboxylic ester group. Even though, the carboxylic acid group and carboxylic ester group are polar, the benzene ring dominate and make aspirin nonpolar. Water is polar. By using ‘Like dissolve like’ rule, aspirin is insoluble in water.
e) Succinic acid in hexane - Insoluble.
Succinic acid, C₄H₆O₄ is insoluble in hexane.
Succinic acid contains two carboxylic acid groups which make the compound polar. However, hexane is nonpolar due to a long chain of hydrocarbon. By using ‘Like dissolve like’ rule, succinic acid is insoluble in hexane.
f) Ibuprofen in diethyl ether - Insoluble
Ibuprofen is insoluble in diethyl ether.
Ibuprofen contalns a complex chain of hydrocarbons with a benzene ring in between the chain and a carboxylic acid group. However, the big chain of hydrocarbons dominates the polarity
of the compound and makes it non-polar. Similarly, diethyl ether is a non-palar compound due the having an other group. By using 'Like dissolve like' rule, ibuprofen is soluble in diethyl ether since they are both nonpolar.
g) 1-Decanol (n-deryl alcohol) in water - slightly soluble.
1-decanol has a solubility of 37mg/L in water at 20°C.
37mg/L = 0.037 mg/mL << 40 mg/mL (Insoluble).
1-decanol is an alcohol. However, 1-decanol is a slightly polar compound since it has a 10-carbon chain and a hydroxyl group. Water is polar. So, because of this, 1-decanol is not so soluble in water.
The solubility on the basis of polarity can be given as
Malic acid in water: Soluble
Naphthalene in water: Insoluble
Amphetamine in ethyl alcohol: Insoluble
Aspirin in Water: Insoluble
Succinic Acid in Hexane: Insoluble
Ibuprofen in Diethyl Ether: Insoluble
Decanol in Water: Slightly soluble because of OH
A solute in a gaseous, liquid, and solid phase can dissolve in a solvent to create a solution through the process of dissolution. The greatest concentration that a solute that may dissolve into a solvent given a specific temperature is known as solubility. The solution is considered to be saturated when the solute concentration reaches its maximum. temperature, pressure, polarity, or molecular size. Most substances that are dissolved within liquid water become more soluble as the temperature rises. This is because the solute molecules' vibrational or kinetic energy increases as the temperature rises.
Malic acid in water: Soluble
Naphthalene in water: Insoluble
Amphetamine in ethyl alcohol: Insoluble
Aspirin in Water: Insoluble
Succinic Acid in Hexane: Insoluble
Ibuprofen in Diethyl Ether: Insoluble
Decanol in Water: Slightly soluble because of OH
To know more about solubility, here:
https://brainly.com/question/28170449
#SPJ6
Classify each amino acid by the chemical properties of its side chain (R group) at pH 7·Select the amino acid that fits best in each category. Each amino acid will be used only once. 1. This amino acid has a positively charged R group: Select answer 2. This amino acid has a negatively charged R group! Select answer 3. This amino acid has a neutral polar R group: Sect answer 4 This amino acid has a nonpolar aliphatic R tryptophan aspartate valine arginine Select answer 5. This amino acid has an aromatic R group:
Answer:
. 1. This amino acid has a positively charged R group: ARGININE
2. This amino acid has a negatively charged R group: ASPARTATE
3. This amino acid has a neutral polar R group: NONE
4. This amino acid has a nonpolar aliphatic R: VALINE
5. This amino acid has an aromatic R group: TRYTOPHAN
Explanation:
1) Arginine contains an extra amino group bearing a positive charge, in its chain which imparts basic properties to it
2) Aspartate contains an extra carboxyl group with a dissociable protron. Once the Protron is dissociated, it carries an extra negative charge in its side chain (R)
3) NONE of the amino acids given belong to this group because amino acids with neutral polar R groups contain functional groups that form hydrogen bonds with water. But, this is not the case with tryptophan aspartate valine or arginine
4) Valine has a R group that is hydrocarbon in nature and thus hydrophobic.
5) Trytophan has a benzene ring in its side chain
Amino acids are classified by the properties of their R groups at pH 7 to be arginine (positively charged), aspartate (negatively charged), valine (neutral polar and nonpolar aliphatic) and tryptophan (aromatic).
Explanation:The chemical properties of an amino acid's side chain, or R group can be identified with their characteristics at pH 7. Here are each of the amino acids classified by the properties of their R groups at pH 7:
The amino acid with a positively charged R group is arginine. The amino acid with a negatively charged R group is aspartate. Valine has a neutral polar R group. The amino acid with a nonpolar aliphatic R group is valine . The amino acid with an aromatic R group is tryptophan.Learn more about Amino Acids here:https://brainly.com/question/31872499
#SPJ3
The proposed mechanism for the reaction ClO-(aq) + I-(aq) --> IO-(aq) + Cl-(aq) is
1. ClO-(aq) + H2O(l) <=> HClO(aq) + OH-(aq) FAST
2. I-(aq) + HClO(aq) <=> HIO(aq) + Cl-(aq) FAST
3. OH-(aq) + HIO(aq) => H2O(l) + IO-(aq) SLOW
What is the overall equation? (Type your answer using the format [NH4]+ for NH4+. Use the lowest possible coefficients. Enter 0 if necessary. Do not leave any box blank.)
(aq) + I -(aq) Cl -(aq) + (aq) (b) Identify the intermediates, if any.
Answer:
1 ClO-(aq) + 1 I-(aq) ---> 1 Cl -(aq) + 1 IO-(aq).
Explanation:
1. ClO-(aq) + H2O(l) <=> HClO(aq) + OH-(aq)
2. I-(aq) + HClO(aq) <=> HIO(aq) + Cl-(aq)
3. OH-(aq) + HIO(aq) => H2O(l) + IO-(aq)
Adding all the 3 equations together gives and it gives:
ClO-(aq) + H2O(l) + I-(aq) + HClO(aq) + OH -(aq) + HIO(aq)
---> HClO(aq) + OH-(aq) + HIO(aq) + Cl -(aq) + H2O(l) + IO-(aq)
Deleting the same species on both sides of the equation gives:
1 ClO-(aq) + 1 I-(aq) ---> 1 Cl -(aq) + 1 IO-(aq)
The overall equation:
1 ClO-(aq) + 1 I-(aq) ---> 1 Cl -(aq) + 1 IO-(aq)
The overall chemical reaction is ClO- (aq) + I- (aq) --> IO- (aq) + Cl- (aq). The intermediates, compounds produced and then consumed in later reaction steps, are HClO and HIO.
Explanation:The overall reaction occurring is the sum of the provided stepwise reactions, where intermediates, or species that are formed in one step and consumed in another, are cancelled out. The chemical species that are intermediates in this case are HClO and HIO.
Adding all three reactions together and cancelling out the intermediates, we get:
ClO-(aq) + I-(aq) --> IO-(aq) + Cl-(aq)
Learn more about Overall Reaction here:https://brainly.com/question/33445914
#SPJ3
For the following soluble (strong electrolyte) species, represent the process for the solid compound dissolving in water: aluminum nitrate, iron (II) chloride, potassium sulfide, magnesium acetate, ammonium phosphate. Ex :MgBr2(s) Mg+2(aq) + 2Br-(aq)
Answer:
Al(NO₃)₃ → Al³⁺ (aq) + 3NO₃⁻ (aq)
FeCl₂ → Fe²⁺ (aq) + 2Cl⁻ (aq)
K₂S → 2K⁺ (aq) + S⁻²(aq)
Mg(CH3COO)₂ → Mg²⁺ (aq) + 2CH3COO⁻ (aq)
(NH₄)₃PO₄ → 3NH₄⁺ (aq) + PO₄⁻³(aq)
Explanation:
Al(NO₃)₃ → Aluminum nitrate
FeCl₂ → Iron (II) chloride
K₂S → Potassium sulfide
Mg(CH3COO)₂ → Magnesium acetate
(NH₄)₃PO₄ → Ammonium phosphate
Dehydrohalogenation of 1-chloro-1-methylcyclopropane affords two alkenes (A and B) as products.
Explain why A is the major product despite the fact that it contains the less substituted double bond.
Explanation:
Dehydrohalogenation reactions occurs as elimination reactions through the following mechanism:
Step 1: A strong base(usually KOH) removes a slightly acidic hydrogen proton from the alkyl halide.
Step 2: The electrons from the broken hydrogen‐carbon bond are attracted toward the slightly positive carbon (carbocation) atom attached to the chlorine atom. As these electrons approach the second carbon, the halogen atom breaks free.
However, elimination will be slower in the exit of Hydrogen atom at the C2 and C3 because of the steric hindrance by the methyl group.
Elimination of the hydrogen from the methyl group is easier.
Thus, the major product will A
The mass percent composition of an organic compound showed that it contained 40.0% C, 6.7% H and 53.3% O. A solution of 0.673 g of the solid in 28.1 g of the solvent diphenyl gave a freezing point depression of 1.6 Celsius. Calculate the molecular formula of the solid. (Kf for diphenyl is 8.00°C/m.)
Answer:
C₄H₈O₄ is the molecular formula of the solid.
Explanation:
Let's apply the freezing point depression to solve this:
ΔT = Kf . m
where Δt = Freezing T° pure solvent - Freezing T° of solution
Kf, the cryoscopic constant
m = molalilty, moles of solute in 1kg of solvent.
We must determine the molecular weight to know the molecular formula of the solid
Let's replace the data.
1.6°C = 8 °C/m . m
We can determine molality, by this:
1.6 °C / 8°C/m = 0.2 m
mol of solute / 1kg of solvent = 0.2
Let's convert the mass of solvent from g to kg, to determine the moles of solute.
mol of solute / 0.0281 kg = 0.2 mol/kg
28.1 g . 1kg / 1000 g = 0.0281 kg
mol of solute = 0.0281 kg . 0.2 mol/kg → 0.00562 moles
Molar mass (g/mol) → 0.673 g / 0.00562 mol = 120 g/mol
Now, we can apply the percent composition.
100 g of compound have ___ 40 g C ___6.7 g H ___ 53.3 g O
120 g of compound must have:
(120 . 40) / 100 = 48 g of C
(120 . 6.7) / 100 = 8 g of H
(120 . 53.3) / 100 = 64 g of O
Let's convert the mass of each elements to moles
48 g . 1 mol/12 g = 4 C
8 g . 1 mol /1g = 8 H
64 g . 1 mol / 16g = 4 O
To determine the molecular formula of the solid compound, calculate the empirical formula using the mass percent composition. Then, divide the molar mass of the compound by the molar mass of the empirical formula to find the number of empirical formula units in the compound.
Explanation:To determine the molecular formula of the solid compound, we first need to calculate its empirical formula. We can assume a 100g sample of the compound, so we have 40g of C, 6.7g of H, and 53.3g of O. Converting the grams to moles, we find that we have approximately 3.33 moles of C, 6.65 moles of H, and 3.33 moles of O.
Next, we need to find the smallest whole number ratio between the elements. The ratio between C, H, and O is approximately 1:2:1. So, the empirical formula of the compound is CH2O.
To find the molecular formula, we need to know the molar mass of the compound. The molar mass of the empirical formula CH2O is approximately 30 g/mol. To determine the molecular formula, we need to divide the molar mass of the compound by the molar mass of the empirical formula. Assuming the molar mass of the compound is a multiple of 30 g/mol, we can divide it by 30 to find the number of empirical formula units in the compound.
Learn more about Molecular Formula here:https://brainly.com/question/36480214
#SPJ3
What is the molar mass of a gas if it takes 7.3 min to effuse through a small hole and 6.0 min for the same amount of N2 to effuse through the same hole gas
Answer:
Molar mass of unknown gas = 41.45 g/mol
Explanation:
Time taken for a gas to effuse/diffuse ∝√(Molar Mass of the gas)
Let T₁ be the time taken for the Unknown gas to effuse. T₁ = 7.3 min = 438s
Let T₂ be the time taken for the Nitrogen gas to effuse. T₁ = 6 min = 360s
(T₁/T₂) = √(Molar mass of unknown gas/Molar mass of Nitrogen)
Molar mass of Nitrogen = 2×14 = 28 g/mol
(438/360) = √(Molar Mass of unknown gas/28)
√(Molar mass of unknown gas/28) = 1.21667
molar mass of unknown gas/28 = 1.21667² = 1.4803
Molar mass of unknown gas = 1.4803 × 28 = 41.45 g/mol
Hope this helps!
Write the full ground-state electron configuration for each:
(a) Cl (b) Si (c) Sr
Answer:
(a) Cl
[tex]1s^22s^22p^63s^23p^5[/tex]
(b) Si
[tex]1s^22s^22p^63s^23p^2[/tex]
(c) Sr
[tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^65s^2[/tex]
Explanation:
(a) Cl
Atomic number = 17
The electronic configuration is -
[tex]1s^22s^22p^63s^23p^5[/tex]
(b) Si
Atomic number = 14
The electronic configuration is -
[tex]1s^22s^22p^63s^23p^2[/tex]
(c) Sr
Atomic number- 38
The electronic configuration is -
[tex]1s^22s^22p^63s^23p^63d^{10}4s^24p^65s^2[/tex]
Give full and condensed electron configurations, partial orbital diagrams showing valence electrons, and the number of inner electrons for the following elements:
(a) Ni (Z = 28) (b) Sr (Z = 38) (c) Po (Z = 84)
Answer:
As is in the attachment.
Explanation:
The condensed electronic configuration is written in the short form by expressing in terms of the elements of the noble gases.
The attached file is the explanation of the answers.
Calculate the number of O atoms in 0.150 g of CaSO4 · 2H2O.
Answer:
There are 0.00523 moles of oxygen in 0.150 grams of calcium sulfate crystal.
Explanation:
Mass of calcium sulfate crystal = m = 0.150 g
Molar mass of calcium sulfate crystal = M = 172 g/mol
Moles of magnesium nitrate = n
[tex]n=\frac{m}{M}[/tex]
[tex]n=\frac{0.150 g}{172 g/mol}=0.0008721 mol[/tex]
1 mole of calcium sulfate crystal has 6 moles of oxygen atoms. Then 0.004446 moles calcium sulfate crystal will have :
[tex]6\times 0.0008721 mol=0.0052326mol\approx 0.00523 mol[/tex]
There are 0.00523 moles of oxygen in 0.150 grams of calcium sulfate crystal.
In 0.150 g of CaSO₄·2H₂O, there are 3.15 × 10²¹ O atoms.
We want to calculate the number of oxygen atoms in 0.150 g of CaSO₄·2H₂O. We will need a series of conversion factors.
What is a conversion factor?A conversion factor is an arithmetical multiplier for converting a quantity expressed in one set of units into an equivalent expressed in another.
We will need to consider the following conversion factors:
The molar mass of CaSO₄·2H₂O is 172.17 g/mol.There are 6.02 × 10²³ molecules of CaSO₄·2H₂O in 1 mole (Avogadro's number).There are 6 oxygen atoms in 1 molecule of CaSO₄·2H₂O.[tex]0.150 g CaSO_4.2H_2O \times \frac{1molCaSO_4.2H_2O}{172.17gCaSO_4.2H_2O} \times \frac{6.02\times 10^{23}moleculesCaSO_4.2H_2O }{1molCaSO_4.2H_2O} \times \frac{6\ O\ atoms}{1moleculeCaSO_4.2H_2O} = \\ = 3.15 \times 10^{21} O\ atoms[/tex]
In 0.150 g of CaSO₄·2H₂O, there are 3.15 × 10²¹ O atoms.
Learn more about Avogadro's number here: https://brainly.com/question/7287712
Find the net force that the southern hemisphere of a uniformly charged solid sphere exerts on the northern hemisphere. Express your answer in terms of the radius R and the total charge Q.
Answer:
Explanation:
The final net force will be in the Z- direction. Let's find out the z component of the force on the differential volume of charge is:
df = dqEcosθz
[tex]E = \frac{1}{4\pi epsilon} \frac{Qr}{R^{3} }[/tex]
dq = ρdV = [tex]\frac{3Q}{4\pi R^{3} }[/tex][tex]r^{2}[/tex]dr.sinθdθdΦ
integrate it over half ball,
[tex]F_{z} = \int\limits^._V {df_{x}dV} =\frac{1}{4\pi epsilon } \frac{Q}{R^{3} } \frac{3Q}{4\pi R^{3} }\int\limits^R_0 {\int\limits^\frac{\pi }{2} _{0} {\int\limits^\frac{\pi }{2} _0 {r^{3} } \, dr } \, } \,[/tex].sinθcosθdθdΦ.( these are part of the integral, i was unable to write it in equation format).
= [tex]\frac{3Q^{2} }{32\pi epsilonR^{2} } \int\limits^\frac{\pi }{2} _b {} \,[/tex] sinθcosθdθ
= [tex]\frac{3Q^{2} }{64\pi epsilon R^{2} }[/tex]
[tex]F = \frac{3Q^{2} }{64\pi epsilon R^{2} } z[/tex]
The net force that the southern hemisphere of a uniformly charged solid sphere exerts on the northern hemisphere is (kQ²)/(2R²), where k is the electrostatic constant, Q is the total charge on the sphere, and R is the radius of the sphere.
Explanation:The net force that the southern hemisphere of a uniformly charged solid sphere exerts on the northern hemisphere can be found by considering the electric field at the surface of the sphere. Since the charge distribution is spherically symmetric, the electric field at the surface of the sphere will only have a radial component. Using Gauss's law, we can determine that the electric field at the surface is given by E = kQ/R², where k is the electrostatic constant, Q is the total charge on the sphere, and R is the radius of the sphere.
To find the force, we can multiply the electric field by the charge on the northern hemisphere. The charge on the northern hemisphere can be calculated as half the total charge on the sphere, Q/2. Therefore, the net force is given by F = (kQ²)/(2R²).
The reaction of hydrochloric acid with potassium permanganate is described above. 526.64 g of hydrogen chloride is reacted with 229.19 g of potassium permanganate. Assuming the reaction goes to completion, calculate the mass of each product produced. g of manganese(II) chloride g of water g of chlorine g of potassium chloride
Explanation:
Equation of the reaction:
2KMnO4(aq) + 16HCl(aq) --> 2MnCl2(aq) + 2KCl(aq) + 5Cl2(g) + 8H2O(aq)
To calculate the limiting reagent, we need to calculate the number of moles of the reactants :
KMnO4:
Molar mass = (39 + 55 + (16*4))
= 158 g/mol
Number of moles = mass/molar mass
= 229.19/158
= 1.4506 mol
HCl:
Molar mass = 1 + 35.5
= 36.5 g/mol
Number of moles = 526.64/36.5
= 14.428 mol
By stoichiometry, 2 moles of KMnO4 reacted with 16 moles of HCl
The limiting reagent :
14.428 moles of HCl * 2 moles of KMnO4/16moles of HCl
= 1.8035 moles of KMnO4 is required to react with 14.428 moles of HCl
But there's 1.4506 moles of KMnO4. Therefore, KMnO4 is the limiting reagent.
Mass of the products:
KCl:
2 moles of KMnO4 will produce 2 moles of KCl
Moles of KCl = 1 * 1.4506 mol
= 1.4506 mol
Molar mass = 39 + 35.5 = 74.5 g/mol
Mass of KCl = 74.5 * 1.4506
= 108.07 g
MnCl2:
2 moles of KMnO4 will produce 2 moles of MnCl2
Number of moles of MnCl2 = 1 * 1.4506
= 1.4506 mol
Molar mass = 55 + (35.5*2)
= 126 g/mol
Mass of MnCl2= 1.4506 * 126
= 182.78 g
Cl2:
2 moles of KMnO4 will produce 5 moles of Cl2
Number of moles of Cl2 = 5/2 * 1.4506
= 3.6265 mol
Molar mass of Cl2 = 35.5*2
= 71 g/mol
Mass of Cl2 = 71* 3.6265
= 257.4815 g
H2O:
2 moles of KMnO4 will produce 8 moles of H2O
Number of moles of H2O = 8/2 * 1.4506
= 5.80 mol
Molar mass of H2O =( 1*2) + 16
= 18 g/mol
Mass of H2O = 18*5.80
= 104.44 g
Answer:
(1) mass of KCl =108.025g
(2) mass of MnCl2 =182.7 g
(3) mass of Cl2 =257.37 g
(4) mass of H20(water) =104.4g
Explanation:
we start with determining the limiting factor
molar mass of KMnO4 = 158g/mol
molar mass of HCl = 36.5g/mol
hence,
number of moles of KMnO4= mass /molar mass
number of moles of KMnO4= 229.19/158 = 1.45moles
number of moles of HCl = 526.64/36.5 = 14.43 moles
we chose the lowest number of moles from the reactants as the limiting factor
hence the limiting factor is KMnO4.
calculating the mass of the products:
for KCl
2moles of KMnO4 reacts to give 2moles of KCl
there for KCl contains 1.45moles
(1) mass of KCl = number of moles of KCl x molar mass of KCl = 1.45 x 74.5 = 108.025g
(2) from mole ratio 2 mole of KMnO4 gave 2 moles of MnCl2
therefore 1.45moles KMnO4 will give 1.45 MnCl2
mass of MnCl2 = 1.45moles x molar mass MnCl2 = 1.45 x 126 = 182.7 g
(3) from mole ratio
2moles KMnO4 gave 5moles Cl2
1.45 moles will give (5 x1.45)/2 moles of Cl2
mass of Cl2 = number of moles of Cl2 x molar mass Cl2 = 3.625 x 71 = 257.37 g
(4)from mole ratio
2moles KMnO4 gave 8moles water(H2O)
1.45 moles will give (1.45x 8)/2 moles of H20
mass of H2O produced = number of moles of H20 x the molar mass of H20 = 5.8 x 18 = 104.4g
What is the electron capacity of the nth energy level? What is the capacity of the fourth energy level?
Answer: The number of electrons present in the fourth energy level are 32
Explanation:
To calculate the number of electrons present in a particular energy level, we use the equation:
[tex]\text{Number of electrons}=2n^2[/tex]
where,
n = principle quantum number
Calculating the number of electrons for fourth energy level:
n = 4
Putting values in above equation, we get:
[tex]\text{Number of electrons}=2(4)^2\\\\\text{Number of electrons}=32[/tex]
Hence, the number of electrons present in the fourth energy level are 32
The value of Δ G ° ' for the conversion of 3-phosphoglycerate to 2-phosphoglycerate (2PG) is + 4.40 kJ/mol . If the concentration of 3-phosphoglycerate at equilibrium is 2.45 mM , what is the concentration of 2-phosphoglycerate? Assume a temperature of 25.0 ° C .
Answer:The concentration of 2-phosphoglycerate is 0.415 mM
Explanation:
[tex]3-phosphoglycerate\rightleftharpoons 2-phosphoglycerate[/tex]
Relation between standard Gibbs free energy and equilibrium constant follows:
[tex]\Delta G^o=-RT\ln K[/tex]
where,
[tex]\Delta G^o[/tex] = Standard Gibbs free energy = +4.40 kJ/mol = 4400 J/mol (Conversion factor: 1kJ = 1000J)
R = Gas constant = [tex]8.314J/K mol[/tex]
T = temperature = [tex]25^0C=(25+273)K=298 K[/tex]
Putting values in above equation, we get:
[tex]4400J/mol=-(8.314J/Kmol)\times 298K\times \ln K[/tex]
[tex]\ln K=-1.776[/tex]
[tex]K=0.169[/tex]
[tex]K=\frac{ 2-phosphoglycerate}{3-phosphoglycerate}[/tex]
[tex]0.169=\frac{ 2-phosphoglycerate}{2.45mM}[/tex]
[tex]2-phosphoglycerate}=0.415mM[/tex]
Thus the concentration of 2-phosphoglycerate is 0.415 mM
What is the electric field (in N/C) at a point 5.0 cm from the negative charge and along the line between the two charges?
Answer: E = 2.455 x 10^5 N/C
Explanation:
q1 = 1.2x10^-7C
q2 = 6.2x10^-8C
Electric field, E = kQ/r²
where k = 9.0x10^9
since the location is (27 - 5)cm from q1
hence electric field, E1 = k*q1/r²
E1= (9x10^9 x 1.2x10^-7)/(0.22)² = 22314.05 N/C
for q2:
E1 = k*q2/r²
E2 at 5cm
E2 = (9x10^9 x 6.2x10^-8)/(0.05)² = 223200 N/C
Hence, the total electric field at 5cm position is
E = E1 + E2
E = 22314.05 + 223200 = 245514.05 N/C
E = 2.455 x 10^5 N/C
Final answer:
The electric field at a point 5.0 cm from a negative charge is calculated using the formula E = kQ/r² with the direction toward the charge.
Explanation:
q1 = 1.2x10⁻⁷ C
q2 = 6.2x10⁻⁸C
Electric field, E = kQ/r²
where k = 9.0x10⁹
since the location is (27 - 5)cm from q1
hence electric field, E1 = k×q1/r²
E1= (9x10⁹ x 1.2x10⁻⁷)/(0.22)² = 22314.05 N/C
for q2:
E1 = k×q2/r²
E2 at 5cm
E2 = (9x10⁹ x 6.2x10⁻⁸)/(0.05)² = 223200 N/C
Hence, the total electric field at 5cm position is
E = E1 + E2
E = 22314.05 + 223200 = 245514.05 N/C
E = 2.455 x 10⁵ N/C
What happens to the temperature of a substance while it boils? (Does it increase, decrease, or remain the same?) Scientifically, why is this?
Answer:
It remains the same
Explanation: during boiling, the temperature is constant. When heat is added to a liquid at the boiling temperature, the heat(energy) added will only converts the liquid into a gas at the same temperature. the energy added to the liquid goes into breaking the bonds between the liquid molecules without causing the temperature to change. This is true for all substance that vapourizes
Why could the Bohr model not predict line spectra for atoms other than hydrogen?
he could not preidct it bud
Rank the following photons in terms of increasing energy: (a) blue (λ = 453 nm); (b) red (λ = 660 nm); (c) yellow (λ = 595 nm).
Answer
Red
Yellow
Blue
Explanation: Decrease in wavelength gives an increase in energy
In terms of increasing energy, red photons have the lowest energy, followed by yellow, and blue photons have the highest energy, which corresponds to their wavelengths from longest to shortest.
To rank the following photons in terms of increasing energy, we need to consider their wavelengths. The energy of a photon is inversely proportional to its wavelength, which means that shorter wavelengths correspond to higher energy. Energy can be calculated using the equation E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength. The order from lowest to highest energy is:
Red (λ = 660 nm)Yellow (λ = 595 nm)Blue (λ = 453 nm)Since red light has the longest wavelength, it has the lowest energy. Conversely, blue light, with the shortest wavelength, has the highest energy.
In what way or ways would the physical universe be different if protons were negatively charged and electrons were positively charged?
Answer:
Nothing will happen as long as the magnitude of charges remains same...
Explanation:
We know that protons are 1836 times more massive than electrons but they have same magnitude of charge overall. So, if we reverse the polarities the system would still be stable as long as the magnitudes of charges are stable and vice versa.
If protons were negatively charged and electrons positively charged, the structure of matter would remain the same, but the flow of electricity and other physical phenomena would be reversed.
Explanation:Switching the charges of protons and electrons would alter the fundamental principles of the physical universe as we know it. Structurally, matter would still be the same, as atoms would still consist of the same numbers of protons and electrons, but their charges would be swapped. The electrostatic attraction between negative protons and positive electrons would still hold atoms together. However, this change would result in opposite electrical flows. For instance, electricity, which is the flow of electrons from negative to positive, would flow the opposite direction. Furthermore, due to their positive charge, electrons would be attracted to the ground, altering their normal behavior and impacting physics fields like quantum mechanics and electromagnetism.
Learn more about Charge Swap here:https://brainly.com/question/32966363
#SPJ3