The results from an iodine-deficient diet, which causes a hyperplasia or overgrowth of the thyroid gland ______

This is an incomplete question, here is a complete question.

Specify which atoms, if any, bear a formal charge in the Lewis structure given and the net charge for the species. Be sure to answer all parts.

[tex]:C\equiv N:[/tex]

a. Formal charge C:___________.

b. Formal charge N:________.

d. Net charge:________.

Answer :

a. Formal charge C : (-1) charge

b. Formal charge N : (0) charge

d. Net charge : (-1) charge

Explanation :

Lewis-dot structure : It shows the bonding between the atoms of a molecule and it also shows the unpaired electrons present in the molecule.

In the Lewis-dot structure the valance electrons are shown by 'dot'.

The given molecule is, [tex]CN^-[/tex]

As we know that carbon has '4' valence electrons and nitrogen has '5' valence electrons.

Therefore, the total number of valence electrons in [tex]CN^-[/tex] = 4 + 5 + 1 = 10

According to Lewis-dot structure, there are 6 number of bonding electrons and 4 number of non-bonding electrons.

Now we have to determine the formal charge for each atom.

Formula for formal charge :

[tex]\text{Formal charge on C}=4-2-\frac{6}{2}=-1[/tex]

[tex]\text{Formal charge on N}=5-2-\frac{6}{2}=0[/tex]

Thus, the net charge will be = -1 + 0 = -1

Missing information:

The reaction is 2O₃(g) --> 3O₂ (g)  ΔH = -300 kJ/mol

Answer:

c

Explanation:

In the molecule of ozone, 3 oxygens are bonded, and, because each one needs to share two pairs of electrons, these 2 bonds are something between a simple and a double bond.

In the reaction of the transformation of the ozone to oxygen gas, these bonds are broken, and a double bond is formed between two oxygen atoms. The sum of the energy of the broken and the formation of the bond is the enthalpy variation of the reaction.

To break a bond, energy must be added to the system, so it's an endothermic reaction and energy is positive, so the formation is exothermic and the energy is negative. Because there're 2 ozone molecules, 4 bonds will be broken, and because there are 3 oxygen molecules, 3 bonds will be formed:

4*E - 3*500 = -300

4E = -300 + 1500

4E = 1200

E = 300 kJ/mol

So, each O3 bond has 300 kJ/mol as an average energy.

Each ozone molecule has 300 kJ/mol as an average bond energy.

The reaction is

[tex]\bold { 2O_3(g) \rightarrow 3O_2 (g)\ \ \ \ \ \ \ \ \ \ \ \Delta H = -300 kJ/mol}[/tex]    

In the molecule of ozone, there 2 double bonds are present with continuous variation.  

The enthalpy variation of the reaction is the sum of the energy of the broken and the formation of the bond.  

Because of 2 ozone molecules, 4 bonds will be broken, and because there are 3 oxygen molecules, 3 bonds will be formed.

[tex]\bold {4\times E - 3 \times 500 = -300}\\\\\bold {4\times E = -300 + 1500}\\\\\bold {E = 300 kJ/mol}[/tex]

Therefore, Each ozone molecule has 300 kJ/mol as an average bond energy.

To know more about average bond enthalpy,

https://brainly.com/question/9998007

Answer:

T_2=338.9026K

Boiling point of CH3COOCH3 at external pressure is 338.9026K

Explanation:

We are going to use Clausius-Clapeyron Equation:

[tex]ln\frac{P_2}{P_1} =-\frac{\Delta H}{R}(\frac{1}{T_2}-\frac{1}{T_1})[/tex]

Where:

P_2 is the external pressure

P_1 is the atmospheric Pressure=1 atm

ΔH is the heat of vaporization

T_2  boiling point of CH3COOCH3 at external pressure

T_1 normal boiling point of liquid methyl acetate

Now:

[tex]\frac{1}{T_2}=-ln\frac{P_2}{P_1}*\frac{R}{\Delta H}+\frac{1}{T_1} \\\frac{1}{T_2}=-ln\frac{1.29}{1}*\frac{8.314}{30.6*10^3}+\frac{1}{331} \\\frac{1}{T_2}=2.9507*10^-^3\\T_2=\frac{1}{2.9507*10^-^3} \\T_2=338.9026K[/tex]

Boiling point of CH3COOCH3 at external pressure is 338.9026K

To find the new boiling point of methyl acetate, use the Clausius-Clapeyron equation with the provided values for the initial boiling point, molar heat of vaporization, and new external pressure.

This question requires us to use the form of the Clausius-Clapeyron equation:

ln(P2/P1) = -ΔHvap/R * (1/T2 - 1/T1)

Where T1 and P1 are the initial temperature and pressure (331K and 1 atm respectively, since normal boiling point is defined as the temperature at which the vapor pressure of a liquid equals 1 atm), and P2 is the new pressure (1.29 atm). ΔHvap is the molar heat of vaporization (30.6 kJ/mol, or 30.6 * 10^3 J/mol to convert kilojoules to joules), and R is the gas constant (8.314 J/mol*K). Solving the equation for T2 (the new boiling point temperature), we rearrange to get T2 = 1/(1/T1 + (R/ΔHvap)*ln(P2/P1)). Plugging in the values, you should find the answer.

https://brainly.com/question/35541255

#SPJ3

Answer:

1.40*10⁻² M

Explanation:

We have the solubility formula

Solubility,

S = KH*P  

where

KH = measure of hardness of water / carbonate hardness = 3.50*10⁻² mol/L.atm

P = atmospheric pressure = 0.400 atm

Hence, we have

S = KH*P

= (3.50*10⁻² mol/L.atm)*(0.400 atm)

= 1.40*10⁻² mol/L

But 1 mol/L = 1 M,

Hence, the answer (1.40*10⁻² mol/L ) is equivalent to

= 1.40*10⁻² M

In order to calculate the mass of fiber that can be spun in 55 min we have to determine the rate of production.

Generally speaking, all the different types of rates have in common a variable divided over time. In this case the variable we're interested in is the mass of fiber, so we have to divide the mass of fiber over the time it takes to spin, and then if we want to find the mass of fiber for any given time, we just have to multiply the time and the rate together.

Keep in mind that the time that is given to us to find the rate is in seconds, so we have to convert that to minutes

The math expression would be the following:

[tex]mass\ of \ fiber (g)=time(min)*\frac{0,059 g}{0.13s}*\frac{60 s}{1 min} \\\\mass\ of \ fiber (g)=55 min*\frac{0,059 g}{0.13s}*\frac{60 s}{1 min}[/tex]

Have a nice day!

#LearnwithBrainly

Answer: D

Explanation:

Answer:

I believe the answer is C I took the test a little bit ago

Explanation:

Answer:

Concentration of chloride ions = 0.584M

Explanation:

The step by step calculations is shown as attached below.

Answer:

The main organic product for the reaction is shown in the following figure.

Explanation:

This is due to the presence of the substituent -CH3 in the molecule, which makes it impossible to leave the hydrogen to form the double bond in the elimination.

The question involves predicting the major product of a given reaction based on stereochemistry, utilizing concepts from organic chemistry such as skeletal structure and the reactivity of alkenes. Understanding these principles can help predict the product, though without the specified diagram, an exact prediction cannot be made.

Your question relates to predicting the major organic product of a given reaction by examining the stereochemistry, which involves the three-dimensional arrangement of atoms in a molecule. Indeed, stereochemistry is a critical aspect of organic chemistry because it influences the properties and reactions of molecules.

Organic chemists often represent large molecules using a skeletal structure or line-angle structure. In this drawing style, carbon atoms are at the ends or bends of lines. Hydrogens attached to carbons are not drawn, and atoms other than carbon and hydrogen are represented by their symbols.

Alkenes are particularly reactive due to the presence of a C=C moiety, a reactive functional group known to undergo addition reactions. For instance, in the halogenation of alkenes, halogens add to the double bond of the alkene instead of replacing hydrogen as they would in an alkane. The stereochemistry of the reaction is significant because the spatial arrangement of atoms can influence the ability of halogens to add across the C=C bond.

Unfortunately, without the specific planar diagram or additional information about the reaction in question, I cannot predict the exact major product; however, this general information about the reactivity and stereochemistry of alkenes might help you predict it.

https://brainly.com/question/36305784

#SPJ11

Answer:

0.002% w/v

Explanation:

The unit w/v means that mass (in g) per volume (in mL). When the solution is diluted, the mass of the solvent will not change, and the mass can be calculated by the concentration (C) multiplied by the volume (V). So, if 1 is the initial solution, and 2 the diluted solution:

C1*V1 = C2*V2

C1 = 0.02%

V1 = 1 mL

V2 = 10 mL

0.02*1 = C2*10

10C2 = 0.02

C2 = 0.002% w/v

Answer : The concentration of a solution with an absorbance of 0.460 is, 0.177 M

Explanation :

Using Beer-Lambert's law :

[tex]A=\epsilon \times C\times l[/tex]

where,

A = absorbance of solution

C = concentration of solution

l = path length

[tex]\epsilon[/tex] = molar absorptivity coefficient

From this we conclude that absorbance of solution is directly proportional to the concentration of solution at constant path length.

Thus, the relation between absorbance and concentration of solution will be:

[tex]\frac{A_1}{A_2}=\frac{C_1}{C_2}[/tex]

Given:

[tex]A_1[/tex] = 0.350

[tex]A_2[/tex] = 0.460

[tex]C_1[/tex] = 0.135 M

[tex]C_2[/tex] = ?

Now put all the given values in the above formula, we get:

[tex]\frac{0.350}{0.460}=\frac{0.135}{C_2}[/tex]

[tex]C_1=0.177M[/tex]

Therefore, the concentration of a solution with an absorbance of 0.460 is, 0.177 M

Beer's Law states that there is a linear relationship between the concentration of a substance in a solution and its absorbance. We can use the equation c = A/(εb) to solve for the concentration of a solution with a given absorbance.

Beer's Law states that there is a linear relationship between the concentration of a substance in a solution and its absorbance. The equation for Beer's Law is A = εbc, where A is the absorbance, ε is the molar absorptivity, b is the path length of the cell, and c is the concentration.

In this case, we have the absorbance (0.350) and concentration (0.135 M) for a solution of Co2+. We can rearrange the equation to solve for the concentration: c = A/(εb). Plug in the given values to find the molar absorptivity and path length, and then substitute those values into the equation to calculate the concentration of a solution with an absorbance of 0.460.

https://brainly.com/question/30762062

#SPJ11

The order of increasing solubility in water for O2, Br2, LiCl, and methanol (CH3OH) is: O2 < Br2 < LiCl < Methanol (CH3OH). This is based on whether the molecules are nonpolar or polar and the intermolecular forces present.

The solubility of compounds in water ultimate depends on the specific intermolecular interactions. The key principle here is 'like dissolves like', with polar substances dissolving in polar solvents (like water) and nonpolar substances dissolving in nonpolar solvents.

In your list: O2, LiCl, Br2, and methanol (CH3OH), the order of increasing solubility in water would in fact be: O2 < Br2 < LiCl < Methanol (CH3OH)

https://brainly.com/question/24300575

#SPJ6

The order of increasing solubility in water is O₂ < Br₂ < LiCl < CH₃OH.

To arrange these compounds in order of increasing solubility in water, we need to consider their polarity and ability to form hydrogen bonds with water. Water is a polar solvent and dissolves polar compounds and ionic compounds well, but non-polar compounds poorly.

Therefore, the order of increasing solubility in water is O₂ < Br₂ < LiCl < CH₃OH.

Answer: The molarity of HCl of this 37% aqueous HCl solution is 12.0 M

Explanation:

Given : 37 g of HCl is dissolve in 100 g of solution.

Mass of solute (HCl) = 37 g

Mass of solution = 100 g

Density of solution = 1.18g/ml

Volume of solution =[tex]\frac{\text {mass of solution}}{\text {density of solution}}=\frac{100g}{1.18g/ml}=84.7ml[/tex]

Molarity is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n= moles of solute  

[tex]V_s[/tex] = volume of solution in ml = 1000 ml

[tex]moles of solute =\frac{\text {given mass}}{\text {molar mass}}=\frac{37g}{36.5g/mol}=1.01moles[/tex]

Now put all the given values in the formula of molarity, we get

[tex]Molarity=\frac{1.01moles\times 1000}{84.7ml}=12.0mole/L[/tex]

The molarity of HCl solution is 12.0 M

Answer:

The classification and illustrations are attached in the drawing.

Explanation:

It is possible to identify the pure substance observing the figure, since it is the only one that has 2 joined atoms (purple and blue) which forms a single compound.

On the other hand, the homogeneous mixture is identified by noting that its atoms are more united with respect to the heterogeneous mixture, highlighting that in homogenous mixtures the atoms, elements or substances are not visible to the naked eye and are in a single phase, instead in the heterogeneous mixture if they can be differentiated.

Heterogeneous mixture: Visible multiple chemicals with distinct parts.

Homogeneous mixture: Appears as one material, uniform with indistinguishable atoms and elements.

Pure material distinguished by figure with linked blue and purple atoms forming a single compound.

Heterogenous combination of visible compounds.  Homogenous mixture comprised of various materials that seem like one substance Each sample portion has the same makeup and properties. The graphic shows that the pure material is the only one with two connected atoms (blue and purple) that form a compound.

The homogeneous mixture is distinguished by its more unified atoms, emphasizing that while in homogeneous mixtures the atoms, elements, and substances are not visible to the eye and are in a single phase, in the heterogeneous mixture they can be distinguished.

Learn more about mixtures, here:

https://brainly.com/question/30391346

#SPJ3

Answer:

a. Cation

b. Anion

Explanation:

Answer:

C. ↔

Explanation:

Resonating structure -

These are the set of lewis structures of the same compound .

Where the structure helps to show the delocalization of the electrons over the structure .

The charge on all the resonating structure remains the same .

All the structures can be interconverted to each other , and are shown by the arrow ↔ .

Hence , from the given information of the question,

The correct option is C. ↔

Final answer:

The intermolecular forces between a hydrogen iodide molecule and a dichloroethylene molecule involve both dispersion forces and dipole-dipole forces.

Explanation:

The intermolecular forces between a hydrogen iodide molecule (HI) and a dichloroethylene molecule (C2H2Cl2) involve both dispersion forces and dipole-dipole forces.

Overall, the intermolecular forces between a hydrogen iodide molecule and a dichloroethylene molecule include both dispersion forces and dipole-dipole forces.

Answer:ΔH < 0, ΔS > 0

Explanation:

Consider ∆G= ∆H-T∆S

If ∆H is negative and and ∆S is positive, when T is increased, T∆S becomes more positive until the result of the difference between ∆H-T∆S becomes negative. Remember that a reaction is only spontaneous when ∆G is negative. Hence under these conditions, ∆G becomes negative and the reaction becomes spontaneous.

Answer:

The oxidizing agent is the MnO₄⁻

Explanation:

This is the redox reaction:

10 I⁻ (aq) + 2 MnO₄⁻ (aq) + 16 H⁺ (aq) → 5 I₂ (s) + 2 Mn²⁺ (aq) + 8 H2O (l)

Let's determine the oxidation and the reduction.

I⁻ acts with -1 in oxidation state and changes to 0, at I₂.

All elements in ground state has 0 as oxidation state.

As the oxidation state has increased, this is the oxidation, so the iodide is the reducing agent.

In the permanganate (MnO₄⁻), Mn acts with +7 in oxidation state and decreased to Mn²⁺. As the oxidation state is lower, we talk about the reduction. Therefore, the permanganate is the oxidizing agent because it oxidizes iodide to iodine

Answer:

[tex]\Delta G_{rxn}^{0}=-117.4kJ/mol[/tex]

Explanation:

Gibbs free energy is an additive property.

[tex]2ClF(g)\rightarrow Cl_{2}(g)+F_{2}(g)[/tex] ; [tex]\Delta G_{1}^{0}=-115.4kJ/mol[/tex]

[tex]Cl_{2}(g)+Br_{2}(g)\rightarrow 2ClBr(g)[/tex] ; [tex]\Delta G_{2}^{0}=-2.0kJ/mol[/tex]

----------------------------------------------------------------------------

[tex]2ClF(g)+Br_{2}(g)\rightarrow 2ClBr(g)+F_{2}(g)[/tex] ; [tex]\Delta G_{rxn}^{0}=\Delta G_{1}^{0}+\Delta G_{2}^{0}=(-115.4-2.0)kJ/mol=-117.4kJ/mol[/tex]

So, standard gibbs free enrgy change for the given reaction is -117.4 kJ/mol

The change in free energy is called G (∆G). The  [tex]\rm \Delta G^\circ rxn= -117.4\; kj/mol[/tex]

Gibb free energy is the measure of the maximum amount of reversible work done in a thermodynamic system.

It means only when the temperature change, but the pressure is constant.

[tex]\rm Cl_2(g) + F_2(g) \longrightarrow 2ClF(g) \;delta\; G\;degree_rxn = 115.4 kJ/mol[/tex]

[tex]\rm Cl_2(g) + Br_2(g) \longrightarrow 2ClBr(g) \;delta\; G \;degree_r_x_n = -2.0 kJ/mol[/tex]

[tex]\rm \Delta G^\circ rxn= \Delta G^\circ1 +G^\circ2[/tex]

[tex]2ClF(g) + Br_2(g) \longrightarrow 2ClBr(g) + F_2(g)[/tex]

[tex]\rm \Delta G^\circ rxn= -115.4\;kj/mol - 2.0 \;kj/mol = -117.4\;kj/mol[/tex]

Thus, the [tex]\rm \Delta G^\circ rxn= -117.4\; kj/mol[/tex].

Learn more about Gibbs free energy, here:

https://brainly.com/question/9552459

Answer:

a. No change.    

b. The equilibrium will shift to the right.

c. No change

d. No change

e.  The equilibrium will shift to the left

f.  The equilibrium will shift to the right      

Explanation:

We are going to solve this question by making use of Le Chatelier´s principle which states that any change in a system at equilibrium will react in such a way as to attain qeuilibrium again by changing the equilibrium concentrations attaining   Keq  again.

The equilibrium constant  for  A(s)⇌B(g)+C(g)  

Keq = Kp = pB x pC

where K is the equilibrium constant ( Kp in this case ) and pB and pC are the partial pressures of the gases. ( Note A is not in the expression since it is a solid )

We also use  Q which has the same form as Kp but denotes the system is not at equilibrium:

Q = p´B x p´C where pB´ and pC´ are the pressures not at equilibrium.

a.  double the concentrations of Q which has the same form as Kp but : products and then double the container volume

Effectively we have not change the equilibrium pressures since we know pressure is inversely proportional to volume.

Initially the system will decrease the partial pressures of B and C by a half:

Q = pB´x pC´     ( where pB´and pC´are the changed pressures )

Q = (2 pB ) x (2 pC) = 4 (pB x PC) = 4 Kp  ⇒ Kp = Q/4

But then when we double the volume ,the sistem will react to  double the pressures of A and B. Therefore there is no change.

b.  double the container volume

From part a we know the system will double the pressures of B and C by shifting to the right ( product ) side since the change  reduced the pressures by a half :

Q =  pB´x pC´  = (  1/2 pB ) x ( 1/2 pC )  =  1/4 pB x pC  = 1/4 Kp

c. add more A

There is no change in the partial pressures of B and C since the solid A does not influence the value of kp

d. doubling the  concentration of B and halve the concentration of C

Doubling the concentrantion doubles  the pressure which we can deduce from pV = n RT = c RT ( c= n/V ), and likewise halving the concentration halves the pressure. Thus, since we are doubling the concentration of B and halving that of C, there is no net change in the new equilibrium:

Q =  pB´x pC´  = ( 2 pB ) x ( 1/2 pC ) = K

e.  double the concentrations of both products

We learned that doubling the concentration doubles the pressure so:

Q =  pB´x pC´   = ( 2 pB ) x ( 2 pC ) = 4 Kp

Therefore, the system wil reduce by a half the pressures of B and C by producing more solid A to reach equilibrium again shifting it to the left.

f.  double the concentrations of both products and then quadruple the container volume

We saw from part e that doubling the concentration doubles the pressures, but here afterward we are going to quadruple the container volume thus reducing the pressure by a fourth:

Q =  pB´x pC´   = ( 2 pB/ 4 ) x (2 pC / 4) = 4/16  Kp = 1/4 Kp

So the system will increase the partial pressures of B and C by a factor of four, that is it will double the partial pressures of B and C shifting the equilibrium to the right.

If you do not see it think that double the concentration and then quadrupling the volume is the same net effect as halving the volume.

Final answer:

The decomposition reaction of A into B and C responds to changes at equilibrium by shifting in a direction that opposes the imposed change, as explained by Le Chatelier's principle. The effects of changes in concentration, container volume, and addition of reactants are used to predict shifts in equilibrium.

Explanation:

Response to Changes in Chemical Equilibrium

For the decomposition of a solid A into gases B and C, represented by the reaction A(s) ⇌ B(g) + C(g), here is how the reaction will respond to changes at equilibrium:

Each of these actions will induce a response from the reaction to maintain the established equilibrium according to Le Chatelier's principle. The reaction will typically shift in the direction that opposes the change imposed on the system.

Answer:

The incorrect statement is "Most enzymes are proteins but some are lipids" the others statements are correct regarding to the Enzymes.

Explanation:

Enzymes are complex macromolecules of globular proteins. However, many enzymes contain certain non-protein substances associated with them for their function, which are known as cofactors and can be organic or inorganic compounds. In addition, the enzymes are thermolabile, presenting their best performance at the ideal temperature. Enzyme activity decreases with increasing and increases with increasing temperature and stops at 0 degrees and above 80 degrees. However, the enzymes of the bacteria that inhabit the hot springs have an ideal temperature of 70 degrees or more. Enzymes also show maximum activity at optimal pH. Varying its activity with increasing or decreasing pH. Enzymes are specific in their action. An enzyme can catalyze only a specific type of reaction or even act on a specific substrate. For example, the enzyme lactase catalyzes the hydrolysis of lactose and no other disaccharides.

To calculate the concentration of a solution, moles of solute are divided by the final volume in liters. Without the specific mass of silver perchlorate, we cannot determine the concentration of the solution.

To calculate the concentration of the chemist's silver perchlorate solution, we need to know the mass of silver perchlorate used and the final volume of the solution. The details of the mass have been omitted from the question, but typically, you would use the molar mass of silver perchlorate to determine the number of moles. To prepare a solution of desired concentration, the chemist would dissolve silver perchlorate in a volumetric flask and add water to the mark, ensuring the final volume accounts for the space occupied by the dissolved solute.

Once a known mass of silver perchlorate is dissolved to make a known final volume, the molarity (M) can be calculated by dividing the number of moles of silver perchlorate by the final volume of the solution in liters. For example, if we dissolved 50 grams of silver perchlorate and the molar mass is X g/mol, we would first calculate the moles as 50 g / X g/mol. Then if the final volume of the solution is 1 L, the concentration would be 50 g / X g/mol / 1 L = Y M.

If the question had provided specific values, we would use them in the calculation and round the answer to the appropriate number of significant digits. However, without the exact mass of silver perchlorate used, we cannot complete this calculation.

Answer:

Explanation:

In the attached picture you may find the structure of betaxolol.

You can see the alcohol group C-O-H as well as the ether group C-O-C.

The arene -or aromatic ring- can also be seen.

There's also a secondary amine group, C-NH-C.

To find the vapor phase composition of a mixture of 1-propanol and 2-propanol at 25 °C, we apply Raoult's Law and Dalton's Law using the given vapor pressures and mole fraction. The calculated vapor phase composition is y1 = 0.2744 for 1-propanol and y2 = 0.7256 for 2-propanol.

The question asks for the composition of the vapor phase at 25 °C for a liquid mixture of 1-propanol and 2-propanol with a given mole fraction of 1-propanol (x1 = 0.450). According to Raoult's Law, the partial pressure of each component in an ideal solution is equal to the mole fraction of the component in the liquid phase times the vapor pressure of the pure component. The total vapor pressure (Ptot) of the solution is the sum of the partial pressures. We can then use Dalton's Law to find the mole fractions of the components in the vapor phase.

To calculate the composition of the vapor phase, we will use the following steps:

Calculate the partial pressure of 1-propanol (P1) using the formula P1 = x1 × P1°, where P1° is the vapor pressure of pure 1-propanol.

P1 = x1 × P1° = 0.450 × 20.9 Torr = 9.405 Torr

Calculate the partial pressure of 2-propanol (P2) using the formula P2 = x2 × P2°, where P2° is the vapor pressure of pure 2-propanol and x2 is the mole fraction of 2-propanol in the liquid phase.

Since the mole fractions must sum to 1,

x2 = 1 - x1 = 1 - 0.450 = 0.550.

Now we calculate P2 = x2 × P2° = 0.550 × 45.2 Torr = 24.86 Torr.

Ptot = P1 + P2 = 9.405 Torr + 24.86 Torr = 34.265 Torr

Calculate the mole fraction of 1-propanol in the vapor phase (y1) using y1 = P1 / Ptot.

y1 = P1 / Ptot = 9.405 Torr / 34.265 Torr = 0.2744

Calculate the mole fraction of 2-propanol in the vapor phase (y2) using y2 = P2 / Ptot.

y2 = P2 / Ptot = 24.86 Torr / 34.265 Torr = 0.7256

Thus, the composition of the vapor phase at 25 °C for the solution with x1 = 0.450 is y1 = 0.2744 and y2 = 0.7256.

The question is incomplete, here is the complete question:

Gaseous compound Q contains only xenon and oxygen. When a 0.100 g sample of Q is placed in a 50.0-mL steel vessel at 0°C, the pressure is 0.230 atm. What is the likely formula of the compound?

A. XeO

B. [tex]XeO_4[/tex]

C. [tex]Xe_2O_2[/tex]

D. [tex]Xe_2O_3[/tex]

E. [tex]Xe_3O_2[/tex]

Answer: The chemical formula of the compound is [tex]XeO_4[/tex]

Explanation:

To calculate the molecular weight of the compound, we use the equation given by ideal gas equation:

PV = nRT

Or,

[tex]PV=\frac{w}{M}RT[/tex]

where,

P = Pressure of the gas = 0.230 atm

V = Volume of the gas  = 50.0 mL = 0.050 L     (Conversion factor:  1 L = 1000 mL)

w = Weight of the gas = 0.100 g

M = Molar mass of gas  = ?

R = Gas constant = [tex]0.0821\text{ L atm }mol^{-1}K^{-1}[/tex]

T = Temperature of the gas = [tex]0^oC=273K[/tex]

Putting value in above equation, we get:

[tex]0.230\times 0.050=\frac{0.100}{M}\times 0.0821\times 273\\\\M=\frac{0.100\times 0.0821\times 273}{0.230\times 0.050}=194.9g/mol\approx 195g/mol[/tex]

The compound having mass as calculated is [tex]XeO_4[/tex]

Hence, the chemical formula of the compound is [tex]XeO_4[/tex]

Answer: 36.5 minutes

Explanation:

Expression for rate law for first order kinetics is given by:

[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]

where,

k = rate constant  

t = age of sample

a = let initial amount of the reactant  = 100

a - x = amount left after decay process  

a) for completion of 36.8 % of reaction  

[tex]7.6=\frac{2.303}{k}\log\frac{100}{100-36.8}[/tex]

[tex]k=\frac{2.303}{7.6}\times 0.19[/tex]

[tex]k=0.060min^{-1}[/tex]

b) for completion of 88.8 % of reaction  

[tex]t=\frac{2.303}{k}\log\frac{100}{100-88.8}[/tex]

[tex]t=\frac{2.303}{0.060}\log\frac{100}{11.2}[/tex]

[tex]t=\frac{2.303}{0.060}\times 0.95[/tex]

[tex]t=36.5min[/tex]

It will take 36.5 minutes for 88.8% of the compound to decompose.

Final answer:

To accurately determine the time required for 88.8% of a compound to decompose in a first-order reaction, knowing the rate constant is essential. While the question provides a specific data point for decomposition over time, it lacks the rate constant needed for a direct calculation. Therefore, accurately answering this specific question based on the provided context is challenging without additional information.

Explanation:

The question asks for the time required for 88.8% of a compound to decompose in a first-order decomposition reaction given that 36.8% decomposes in 7.6 minutes. In first-order reactions, the time it takes for a certain percentage of the reactant to decompose does not depend on the initial concentration but on the rate constant (k) of the reaction. The integrated rate law for first-order reactions is given by the formula ln([A]0/[A]) = kt, where [A]0 is the initial concentration, [A] is the concentration at time t, and k is the rate constant.

To determine the time required for 88.8% decomposition, we would need to know the rate constant of the reaction. However, with the information provided, we can infer the rate constant by using the time and percent decomposition already given (36.8% in 7.6 minutes), but to find the exact time for 88.8% decomposition without additional specific information (e.g., actual rate constant value) is not directly feasible based on the provided context alone. Knowing the rate constant, we could then apply the formula to find the time for 88.8% of the compound to decompose.

Without the rate constant, an alternative but less precise method involves understanding that the time to reach a certain level of decomposition is related to the half-life of the reaction. Since the time for half of a reactant to decompose (its half-life) in a first-order reaction is constant, we can indirectly estimate times for specific percentages of decomposition if we know the half-life, which again depends on knowing the rate constant.

Answer: 1.31M

Explanation:

V1 = 10mL

C1 = 8.5M

V2 = 65mL

C2 =?

C1V1 = C2V2

10 x 8.5 = C2 x 65

C2 = (10 x 8.5 ) /65

C2 = 1.31M

The concentration of the dilute solution of nitric acid is 1.31 M.

We have 10.00 mL (V₁) of 8.50 M HNO₃ (C₁) and we add water to obtain a dilute solution with a volume (V₂) of 65.0 mL. We can calculate the concentration of the dilute solution (C₂) using the dilution rule.

[tex]C_1 \times V_1 = C_2 \times V_2\\C_2 = \frac{C_1 \times V_1}{V_2} = \frac{8.50 M \times 10.00 mL}{65.0 mL} = 1.31 M[/tex]

The concentration of the dilute solution of nitric acid is 1.31 M.

You can learn more about dilution here: https://brainly.com/question/13844449

Answer: The molar mass of monoprotic acid is 135.9 g/mol

Explanation:

To calculate the number of moles for given molarity, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (in mL)}}[/tex]

Molarity of NaOH solution = 0.1008 M

Volume of solution = 15.0 mL

Putting values in above equation, we get:

[tex]0.1008M=\frac{\text{Moles of NaOH}\times 1000}{15.0}\\\\\text{Moles of NaOH}=\frac{(0.1008\times 15.0)}{1000}=0.00151mol[/tex]

As, the acid is monoprotic, it contains 1 hydrogen ion

1 mole of [tex]OH^-[/tex] ion of NaOH neutralizes 1 mole of [tex]H^+[/tex] ion of monoprotic acid

So, 0.00151 moles of [tex]OH^-[/tex] ion of NaOH will neutralize [tex]\frac{1}{1}\times 0.00151=0.00151mol[/tex] of [tex]H^+[/tex] ion of monoprotic acid

Moles of monoprotic acid = 0.00151 moles

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Moles of monoprotic acid = 0.00151 mole

Given mass of monoprotic acid = 0.2053 g

Putting values in above equation, we get:

[tex]0.00151mol=\frac{0.2053g}{\text{Molar mass of monoprotic acid}}\\\\\text{Molar mass of monoprotic acid}=\frac{0.2053g}{0.00151mol}=135.9g/mol[/tex]

Hence, the molar mass of monoprotic acid is 135.9 g/mol

The molar mass of the monoprotic acid, which can be calculated using the titration method with sodium hydroxide, was found to be approximately 135.7 g/mol.

The subject of your query concerns on calculating the molar mass of an organic acid using the titration method with known information about sodium hydroxide. First, we need to look into the moles of sodium hydroxide (NaOH) used. Since we know the volume V=15.0 mL and concentration C=0.1008 M of NaOH used, moles (n) can be calculated using the equation n=CV, converting volume to liters, gives n = 0.1008 mol/L * 0.015 L = 0.001512 mol.

Because the sodium hydroxide and monoprotic acid react in a 1:1 ratio (as given by the neutralization equation NaOH + HA -> NaA + H2O), the moles of acid are also 0.001512.

The molar mass of the substance can then be determined by dividing the given mass of the sample by the number of moles. The mass of the organic acid is 0.2053g, so the molar mass (M) is M = mass / n = 0.2053g / 0.001512 mol = 135.7 g/mol.

This means that the molar mass of the monoprotic organic acid is approximately 135.7 g/mol.

https://brainly.com/question/20691135

#SPJ3

Answer:

The farthest the vehicle could travel (if it gets 20.0 miles per gallon on liquid gasoline) is 1.62 miles.

Explanation:

The automobile gas tank has a volume capacity of 15 gallons which can be converted to liters: 15 × 3.7854 = 56.781 liters

We can find the moles of gasoline by using the ideal gas equation: PV = nRT.

Make n (number of moles) the subject of the formula: n = PV/RT, where:

P = 747 mmHg

V = 56.781 liters

R (universal gas constant) = 0.0821 liter·atm/mol·K

T = 25 ∘C = (273 + 25) K = 298 K

1 atm (in the unit of R) = 760 mmHg

Therefore n = 747 × 56.781/(0.0821 × 760 × 298) = 2.281 mol.

Given that the molar mass of the gasoline = 101 g/mol,

the mass of gasoline = n × molar mass of gasoline = 2.281 mol × 101 g/mol = 230.38 g

the density of the liquid gasoline = 0.75 g/mL

In order to calculate the distance the vehicle can travel, we have to calculate volume of gasoline available = mass of the liquid gasoline ÷ density of liquid gasoline

= 230.38 g ÷ 0.75 g/mL = 307.17 mL = 0.3071 liters = 0.3071 ÷ 3.7854 = 0.0811 gallons

since the vehicle gets 20.0 miles per gallon on liquid gasoline, the distance traveled by the car = gallons available × miles per gallon = 0.0811 × 20 = 1.62 miles.

A substance that is required to run the vehicle and the machine is known as fuel. These substance are as follows:-

According to the data given in the question.

The farthest the vehicle could travel is 1.62 miles.

The volume capacity of 15 gallons which can be converted to liters: [tex]15 * 3.7854 = 56.781 liters[/tex]

The formula used is as follows:-[tex]PV =nRT[/tex]

After putting the value:-

P = 747 mmHg

V = 56.781 liters

R (universal gas constant) = 0.0821 liter·atm/mol·K

[tex]T = 25C = (273 + 25) K = 298 K[/tex]

Therefore, the value of [tex]n = \frac{747 * 56.781}{(0.0821 * 760 * 298} = 2.281 mol.[/tex]

Given that the molar mass of the gasoline = 101 g/mol,

Mass of gasoline = n × molar mass of gasoline

[tex]= 2.281 mol * 101 g/mol = 230.38 g[/tex]

the density of the liquid gasoline = 0.75 g/mL

[tex]= \frac{230.38}{0.75}= 307.17 mL \\\\= 0.3071 liters\\\\= \frac{0.3071}{3.7854} = 0.0811 gallons[/tex]

Since the vehicle gets 20.0 miles per gallon on liquid gasoline, the distance traveled by car = gallons available × miles per gallon =

[tex]0.0811 * 20 = 1.62 miles.[/tex]

For more information, refer to the link:-

https://brainly.com/question/22610586

Answer:

Lower  

Explanation:

Surface tension occurs because molecules at the surface do not have molecules above them, so they cohere more strongly to their neighbours.

The stronger cohesive forces make it more difficult to move an object through the surface than when it is beneath the surface.

The attractive forces in water are strong because of hydrogen bonding.

A hexane molecule is nonpolar, so the only attractions are the weak London dispersion forces.

The cohesive forces at the surface are much lower than those in water, so the surface tension of hexane is lower than that of water at the sane temperature.