The percent copper in an unknown copper compound is 21.90 %. What is the formula weight of the unknown compound? You may assume that one mole of the compound contains one mole of copper. Enter your answer in units of amu.

Answer and Explanation

The isomer picked is the N-Propylamine.

It has a lone pair of electron available on the electron rich Nitrogen and no formal charge.

Since it will be hard to draw the Lewis structure in this answer format, I'll attach a picture of the Lewis structure to this answer.

The lone pair of electron is shown by the two dots on the Nitrogen atom.

The Lewis structure for propylamine is drawn by connecting a chain of three carbon atoms with the appropriate number of hydrogen atoms, and attaching the nitrogen atom to the third carbon with two of its own hydrogen atoms and a lone pair, ensuring all atoms follow the octet rule without any formal charges.

To draw the Lewis structure for propylamine (CH₃(CH₂)₂NH₂), you should follow the basic rules of drawing Lewis structures and consider the number of valence electrons that each atom has. Carbon (C) has 4 valence electrons, Hydrogen (H) has 1, and Nitrogen (N) has 5. Here's the step-by-step breakdown:

In propylamine, no formal charges are present as all the atoms have the correct number of electrons around them for neutrality. The nitrogen atom has a free lone pair and there are no pi bonds, so each bond is a single bond.

Answer:

volume of gas = 9.1436cm³

Explanation:

We will only temperature from °C to K since the conversion is done by the addition of 273 to the Celsius value.

Its not necessary to convert pressure and volume as their conversions are done by multiplication and upon division using the combined gas equation, the factors used in their conversions will cancel out.

V1 =10.1cm³ , P1 =746mmHg,     T1=23°C =23+273=296k

V2 =? ,   P2 =760mmmHg ,     T2=0°C = 0+273 =273K

Using the combined gas equation to calculate for V2;

[tex]\frac{V1P1}{T1}=\frac{V2P2}{T2} \\ re-arranging, \\V2 =\frac{V1P1T2}{P2T1}[/tex]

[tex]V2 =\frac{10.1*746*273}{760*296}[/tex]

V2=9.1436cm³

Answer:

The volume of CO2 is 4.20 L

Explanation:

Step 1: Data given

Pressure = 270 mm Hg =  260 /760 = 0.355263 atm

Temperature : 38.5 °C = 311.65 K

Mass of C4H8 = 0.820 grams

Step 2: The balanced equation

C4H8 + 6O2 → 4CO2 + 4H2O

Step 3: Calculate moles C4H8

Moles C4H8 = mass C4H8 / molar mass C4H8

Moles C4H8 = 0.820 grams / 56.11 g/mol

Moles C4H8 = 0.0146 moles

Step 4: Caalculate moles CO2

For 1 mol C4H8 we need 6 moles O2 to produce 4 moles CO2 and 4 moles H2O

For 0.0146 moles we'll have 4*0.0146 = 0.0584 moles CO2

Step 6: Calculate Volume CO2

p*V = n*R*T

V = (n*R*T) /p

⇒ with V = the volume of CO2 = TO BE DETERMINED

⇒ with n = the moles of CO2 = 0.0584 moles

⇒ with R = the gas constant = 0.08206 L*atm / mol*K

⇒ with T = The temperature = 311.65 K

⇒ with p = the pressure = 0.355263 atm

V = (0.0584 * 0.08206 * 311.65) / 0.355263

V = 4.20 L

The volume of CO2 is 4.20 L

Answer:

For 1: The molarity of [tex]K^+\text{ ions}[/tex] in this solution is 0.0592 M

For 2: The new molarity of [tex]K^+\text{ ions}[/tex] in this solution is [tex]2.07\times 10^{-3}M[/tex]

Explanation:

To calculate the molarity of solution, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (in L)}}[/tex]

Given mass of KOH = 1.66 g

Molar mass of KOH = 56.1 g/mol

Volume of solution = 500.0 mL

Putting values in above equation, we get:

[tex]\text{Molarity of solution}=\frac{1.66\times 1000}{56.1g/mol\times 500.0}\\\\\text{Molarity of solution}=0.0592M[/tex]

1 mole of KOH produces 1 mole of potassium ions and 1 mole of hydroxide ions

So, molarity of [tex]K^+\text{ ions}=0.0592M[/tex]

Hence, the molarity of [tex]K^+\text{ ions}[/tex] in this solution is 0.0592 M

To calculate the molarity of the diluted solution, we use the equation:

[tex]M_1V_1=M_2V_2[/tex]

where,

[tex]M_1\text{ and }V_1[/tex] are the molarity and volume of the concentrated KOH solution  having [tex]K^+\text{ ions}[/tex]

[tex]M_2\text{ and }V_2[/tex] are the molarity and volume of diluted KOH solution  having [tex]K^+\text{ ions}[/tex]

We are given:

[tex]M_1=0.0592M\\V_1=35.00mL\\M_2=?M\\V_2=1000mL[/tex]

Putting values in above equation, we get:

[tex]0.0592\times 35.00=M_2\times 1000\\\\M_2=\frac{0.0592\times 35.0}{1000}=2.07\times 10^{-3}M[/tex]

Hence, the new molarity of [tex]K^+\text{ ions}[/tex] in this solution is [tex]2.07\times 10^{-3}M[/tex]

Answer:

0.827 mol

Explanation:

Sodium bicarbonate (NaHCO₃) reacts with hydrochloric acid (HCl) by the equation:

NaHCO₃ + HCl → CO₂ + NaCl + H₂O

Thus, the stoichiometry between sodium bicarbonate and CO₂ is

1 mol : 1 mol.

The molar mass of sodium bicarbonate is 84.007 g/mol, thus the mass in 1 mol is 84.007 g, and the density of it is 2.2 g/mL, thus the volume in 1 mol is:

V = 84.007/2.2 = 38.185 mL

According to Proust's law, the ratio reaction remains constant so:

38.185 mL of NaHCO₃/1 mol of CO₂ = 31.6 mL of NaHCO₃/n

38.185n = 31.6

n = 31.6/38.185

n = 0.827 mol of CO₂

Answer:

2.33 M is the molarity of sodium ions in a solution prepared by mixing.

Explanation:

[tex]Molarity=\frac{n}{V(L)}[/tex]

n = moles of substance

V = Volume of solution in L

In, 236 ml of 0.75 M sodium phosphate :

Moles of sodium phosphate = n

Volume of sodium phosphate solution = V = 236 mL = 0.236 L(1 m L =0.001 L)

Molarity of the solution = M = 0.75 M

[tex]n=M\times V=0.75 M\times 0.236 L=0.177 mol[/tex]

Sodium phosphate = [tex]Na_3PO_4[/tex]

1 mole of sodium phosphate has 3 mol of sodium ions.

Then 0.177 moles will have = 0.177 mol × 3 = 0.531 mol

In, 252.8 ml of 1.2 M sodium sulfide:

Moles of sodium sulfide = n'

Volume of sodium sulfide solution = V' = 252.8 mL = 0.2528 L(1 m L =0.001 L)

Molarity of the solution = M' = 1.2 M

[tex]n'=M'\times V'=1.2 M\times 0.2528 L=0.30336 mol[/tex]

Sodium sulfide= [tex]Na_2S[/tex]

1 mole of sodium sulfide has 2 mol of sodium ions.

Then 0.30336 moles will have = 0.30336 mol × 2 = 0.60672 mol

After mixing both solutions:

Moles of sodium ions = 0.60672 mol + 0.531 mol = 1.13772 mol

Volume of the mixture = 0.2528 L = 0.236 L = 0.4888 L

Molarity of sodium ions:

[tex]=\frac{1.13772 mol}{0.4888 L}=2.3275 M\approx 2.33 M[/tex]

2.33 M is the molarity of sodium ions in a solution prepared by mixing.

The molarity of sodium ion, Na⁺ in the resulting solution is 2.33 M

We'll begin by calculating the number of mole of sodium ion, Na⁺ in each solution.

For Na₃PO₄:

Volume = 236 mL = 236 / 1000 = 0.236 L

Molarity = 0.75 M

Mole = Molarity x Volume

Mole of Na₃PO₄ = 0.75 × 0.236

Na₃PO₄(aq) —> 3Na⁺(aq) + PO₄³¯(aq)

From the balanced equation above,

1 mole of Na₃PO₄ contains 3 mole of Na⁺

Therefore,

0.177 mole of Na₃PO₄ will also contain = 0.177 × 3 = 0.531 mole of Na⁺

Thus, 0.531 mole of Na⁺ is present in 480 mL of 0.75 M Na₃PO₄

For Na₂S:

Volume = 252.8 mL = 252.8 / 1000 = 0.2528 L

Molarity = 1.2 M

Mole = Molarity x Volume

Mole of Na₂S = 1.2 × 0.2528

Na₂S(aq) —> 2Na⁺(aq) + S²¯(aq)

From the balanced equation above,

1 mole of Na₂S contains 2 moles of Na⁺

Therefore,

0.30336 mole of Na₂S will contain = 0.30336 × 2 = 0.60672 mole of Na⁺

Thus, 0.60672 mole of Na⁺ is present in 252.8 mL of 1.2 M Na₂S

Mole of Na⁺ in Na₃PO₄ = 0.531 mole

Mole of Na⁺ in Na₂S = 0.60672 mole

Total mole = 0.531 + 0.60672

Volume of Na₃PO₄ = 0.236 L

Volume of Na₂S = 0.2528 L

Total volume = 0.236 + 0.2528

Total mole = 1.13772 mole

Total volume = 0.4888 L

Molarity = mole / Volume

Molarity of Na⁺ = 1.13772 / 0.4888

Therefore, the molarity of sodium ion, Na⁺ in the resulting solution is 2.33 M

Learn more: https://brainly.com/question/25653729

Explanation:

The n in Bohr model of the atom is principle quantum number.

The Rydberg n integer stats represent electron orbits at various integral distances from the atom in Bohr's conceptualization of the atom. Subsequent models discovered that the values for n1 and n2 match the two orbitals ' principle quantum numbers.

Final answer:

The Rydberg equation and the Bohr model are related through the principal quantum number n. In the Rydberg equation, n1 and n2 represent initial and final energy levels during an electron transition, similar to the energy levels denoted by n in the Bohr model of the atom. This relationship explains the emission spectra of atoms such as hydrogen.

Explanation:

The Rydberg equation relates to the Bohr model through the quantum number n. In the Rydberg equation, n1 corresponds to the lower energy level (or orbit) from which an electron transitions to a higher energy level designated by n2 where n2 > n1. The principle quantum number n in the Bohr model signifies distinct energy levels or orbits in which electrons can reside around the nucleus, with the lowest energy state starting at n=1 and increasing integers signifying higher energy states.

When an electron jumps between energy levels, light is emitted, and the wavelength of this light can be calculated using the Rydberg formula, which includes the Rydberg constant and the initial and final principal quantum numbers. For the hydrogen atom, transitions to the ground state (n = 1) produce the Lyman series in the ultraviolet band, while transitions to the first excited state (nf = 2) result in the Balmer series in the visible band, and so on for higher energy levels.

The given question is incomplete. The complete question is as follows.

A 0.6-m3 rigid tank is filled with saturated liquid water at 135°C. A valve at the bottom of the tank is now opened, and one-half of the total mass is withdrawn from the tank in liquid form. Heat is transferred to water from a source of 210°C so that the temperature in the tank remains constant. Assume the surroundings to be at 25°C and 100 kPa. Determine the amount of heat transfer.

Explanation:

First, we will determine the initial mass from given volume and specific volume as follows.

              [tex]m_{1} = \frac{V}{\alpha_{1}}[/tex]

                         = [tex]\frac{0.6}{0.001075}kg[/tex]

                         = 558.14 kg

Hence, the final mass and mass that has left the tank are as follows.

             [tex]m_{2} = m_{out} = \frac{1}{2}m_{1}[/tex]  

                          = [tex]\frac{1}{2} \times 558.14 kg[/tex]

                          = 279.07 kg

Now, the final specific volume is as follows.

          [tex]\alpha_{2} = \frac{V}{m_{2}}[/tex]

                        = [tex]\frac{0.6}{279.07} m^{3}/kg[/tex]

                        = 0.00215 [tex]m^{3}/kg[/tex]

Final quality of the mixture is determined actually from the total final specific volume and the specific volumes of the constituents for the given temperature are as follows.

           [tex]q_{2} = \frac{\alpha_{2} - \alpha_{liq135}}{(\alpha_{vap} - \alpha_{liq})_{135}}[/tex]

                        = [tex]\frac{0.00215 - 0.001075}{0.58179 - 0.001075}[/tex]

                        = [tex]1.85 \times 10^{-3}[/tex]

Hence, the final internal energy will be calculated as follows.

          [tex]u_{2} = u_{liq135} + q_{2}u_{vap135}[/tex]

                      = [tex](567.41 + 1.85 \times 10^{-3} \times 1977.3) kJ/kg[/tex]

                      = 571.06 kJ/kg

Now, we will calculate the heat transfer as follows.

            [tex]\Delta U = Q - m_{out}h_{out}[/tex]

      [tex]m_{2}u_{2} - m_{1}u_{1} = Q - m_{out}h_{out}[/tex]

                Q = [tex](279.07 \times 571.06 - 558.14 \times 567.41 + 279.07 \times 567.75) kJ[/tex]

                    = 1113.5 kJ

Thus, we can conclude that amount of heat transfer is 1113.5 kJ.

Final answer:

The question involves concepts of thermodynamics, specifically related to heat transfer and thermal equilibrium in a situation with a saturated liquid undergoing withdrawal and heating to maintain a constant temperature, demonstrating the application of energy conservation principles.

Explanation:

The question describes a thermodynamics scenario where heat transfer is involved to maintain the temperature of the system (a tank with water) constant. The water inside the rigid tank undergoes a process where half of its mass is withdrawn while the temperature is kept at 135°C through the addition of heat from a 210°C source. This is an example of applying the concepts of thermodynamics such as energy transfer, the properties of substances under varying conditions, and the concept of a saturated liquid.

When dealing with the thermal equilibrium between two bodies with different initial temperatures, the overall heat lost by the hotter body (pan) is equal to the heat gained by the colder body (water). The final temperature at equilibrium can be calculated using the principle of conservation of energy. Similarly, the expansion of a fluid within a radiator and thermal contraction of coffee in a glass can be described using thermodynamic principles and the relevant coefficients of thermal expansion and specific heat capacities.

Answer:

Answer in explanation

Explanation:

Argon has 18 electrons. So to get the element in question, we only need to add 18 to the number of the filled electrons.

a. Germanium, atomic number 32

Other group members:

Silicon Si , Carbon C , Tin Sn , Lead Pb and Flerovium Fl

b. Cobalt , atomic number 27

Other group members:

Rhodium Rh , Iridium Ir and Meitnerium Mt

c. Technetium , atomic number 43

Krypton is element 36

Other group members are :

Manganese Mn , Rhenium Re and Bohrium Bh

Answer:

P = 2.65 E-3 mm Hg

Explanation:

liquid-vapor equilibrium:

⇒ ec. Clausius-Clapeyron:

∴ R = 8.314 E-3 KJ/K.mol

∴ ΔHv = 59.11 KJ/mol

∴ T2 = 25°C ≅ 298 K

∴ T1 = 356.7°C = 629.7 K

normal boiling point:

∴ P = 1 atm = P1 = 101.325 KPa

vapor pressure (P2):

⇒ Ln P2 - Ln (101.325) = - (59.11 KJ/mol)/(8.314 E-3 KJ/K.mol)*[ (1/298) - (1/629.7) ]

⇒ Ln P2  - 4.618 = - (7109.694 K)*[ 1.7676 E-3 K-1 ]

⇒ Ln P2 = 4.618  - 12.567

⇒ P2 = e∧(-7.9494)

⇒ P2 = (3.5313 E-4 KPa)×(7.50062mm Hg/KPa) = 2.65 E-3 mm Hg

Answer:

less than

Explanation:

The absorbance of a solution is a function of the concentration (amount) of a substance in the solution. Mathematically, if the concentration is increased, the absorbance of the solution will also increase and if the concentration is decreased, the absorbance will decrease. There will be a decrease in the value of the absorbance because the calculated and predicted masses are not the same.

Final answer:

The absorbance of a solution made from a solid may be greater or less than that of an unknown solution, depending on their respective concentrations and properties.

Explanation:

When comparing the absorbance of a solution made from a solid to that of an unknown solution, we need to consider the concentration or the size of the container. A solution made from a solid may have a higher absorbance because it contains a higher concentration of molecules that can interact with light. On the other hand, the absorbance of the unknown solution will depend on its specific properties. Therefore, whether the absorbance of the solution made from a solid is greater, less than, or the same as the absorbance of the unknown solution cannot be determined without further information.

Compound A is an optically active ketone, B is a chiral secondary alcohol, and C is an alkene formed from A by a Wolff-Kishner reduction. Acid D is a carboxylic acid crafted from the oxidation of alkene C.

This problem involves the identification of chemical compounds through a series of reactions and stereochemical considerations. We start by identifying compound A as an optically active ketone with the molecular formula C11H12O, since it gave a negative Tollens test. LiAlH4, a strong reducing agent, follows by acid treatment, produces compound B, an alcohol that can be resolved into enantiomers, suggesting that compound A must be a ketone, as LiAlH4 can reduce ketones to secondary alcohols, which can be chiral.

When compound B reacts with CrO3/pyridine, it reverts to the optically inactive ketone compound A. This suggests that compound B is a secondary alcohol that, when oxidized, returns to the original ketone without any chirality, indicating the presence of a stereocenter in B.

Heating compound A with hydrazine in base to give hydrocarbon C suggests a Wolff-Kishner reduction, which completely removes oxygen atoms from ketones or aldehydes to yield hydrocarbons. Finally, when compound C is oxidized with alkaline KMnO4 to give carboxylic acid D, this indicates that C is an alkene.

Compound A is Ketone, Compound B is chiral alcohol, Compound C is hydrocarbon, Compound D is carboxylic acid.

Let's break down the given information step by step:

1. Compound A, [tex]C_{11}H_{12}O[/tex], gave a negative Tollens test:

This suggests that compound A does not contain an aldehyde functional group. Instead, it may contain a ketone or another functional group that does not react with Tollens reagent.

2. Compound A was treated with [tex]LiAlH_4[/tex], followed by dilute acid, to give compound B, which could be resolved into enantiomers:

The reduction of a ketone with [tex]LiAlH_4[/tex] followed by hydrolysis with dilute acid converts the ketone to a chiral alcohol. Since compound B can be resolved into enantiomers, it suggests that compound A was a prochiral ketone.

3. When optically active B was treated with [tex]CrO_3[/tex] in pyridine, an optically inactive sample of A was obtained:

This reaction is a oxidation reaction known as the Jones oxidation. It converts a secondary alcohol (like B) into a ketone without affecting the optical activity. However, since an optically inactive sample of A was obtained, it suggests that compound B must have been racemic (an equal mixture of its enantiomers). This indicates that the chiral center in compound B was destroyed during the oxidation.

4. Heating A with hydrazine in base gave hydrocarbon C, which, when heated with alkaline KMnO4, gave carboxylic acid D:

Heating a ketone with hydrazine in base (Wolff-Kishner reduction) converts it into a hydrocarbon. This indicates that compound A was a ketone. Furthermore, oxidation of hydrocarbon C with alkaline [tex]KMnO_4[/tex]gives a carboxylic acid. This suggests that hydrocarbon C must have been a primary alcohol.

Answer:

The question is incomplete as some details are missing. Here is the complete question ; When I was a boy, Uncle Wilbur let me watch as he analyzed the iron content of runoff from his banana ranch. A 25.0-mL sample was acidified with nitric acid and treated with excess KSCN to form a red complex. (KSCN itself is colorless.) The solution was then diluted to 100.0 mL and put in a variable-pathlength cell. For comparison, a 10.0-mL reference sample of 6.80 104 M Fe3 was treated with HNO3 and KSCN and diluted to 50.0 mL. The reference was placed in a cell with a 1.00-cm light path. The runoff sample exhibited the same absorbance as the reference when the pathlength of the runoff cell was 2.48 cm. What was the concentration of iron in Uncle Wilbur

Explanation:

The concept of beer Lambert Law and the dilution formula was used in solving the question. According to Beer Lambert law, as light enters through a solution that has an intensity Io, and emerges with intensity I with an assumed concentration c in mol/dm3 at a length l cm.

Mathematically from beer lambert law ; ecl =Ig (Io/I), where e is the extinction coefficient.

The attached file shows the detailed steps and appropriate substitution.

Answer:

a). [tex]2.25 \times 10^{8}[/tex] m/s

b).  1.23 m/s                                

Explanation:

Given :

Index of refraction for water, [tex]n_{w}[/tex] = 1.33

Index of refraction of diamond, [tex]n_{d}[/tex] = 2.42

We know that,

Refractive index of any material is given by,

[tex]n = \frac{c}{v}[/tex]

where c = sped of light in air

            v = speed of light in any medium

a). Speed of light in water

   [tex]v = \frac{c}{n_{w}}[/tex]

   [tex]v = \frac{3\times 10^{8}}{1.33}[/tex]

   [tex]v = 2.25\times 10^{8}[/tex] m/s

b). Speed of light in diamond

    [tex]v =\frac{c}{n_{d}}[/tex]

   [tex]v =\frac{3\times 10^{8}}{2.42}[/tex]

      = 1.23 m/s

Explanation:

When we move across a period from left to right then there will occur an increase in electronegativity and also there will occur an increase in non-metallic character of the elements.

As cesium (Cs) is a group 1 element and radon (Rn) is a group 18 element. Hence, cesium (Cs) is more metallic in nature than radon.

This means that radon (Rn) is less metallic than cesium (Cs).

Tin (Sn) is a group 14 element and tellurium (Te) is a group 16 element. Hence, Te is less metallic than Sn.

Selenium (Se) is a group 16 element and germanium (Ge) is a group 14 element. Therefore, selenium being more non-metallic in nature is actually less metallic than Ge.

Answer:

Part A:

Charge is [tex]P^{3-}[/tex]

Configuration is [tex]1s^2 2s^22p^63s^23p^6[/tex]

Part B:

Charge is [tex]Mg^{2+}[/tex]

Configuration is [tex]1s^2 2s^22p^6[/tex]

Part C:

Charge is [tex]Se^{2-}[/tex]

Configuration is [tex]1s^2 2s^22p^63s^23p^64s^23d^{10}4p^6[/tex]

Explanation:

Monatomic ions:

These ions consist of only one atom. If they have more than one atom then they are poly atomic ions.

Examples of Mono Atomic ions: [tex]Na^+, Cl^-, Ca^2^+[/tex]

Part A:

For P:

Phosphorous (P) has 15 electrons so it require 3 more electrons to stabilize itself.

Charge is [tex]P^{3-}[/tex]

Full ground-state electron configuration of the mono atomic ion:

[tex]1s^2 2s^22p^63s^23p^6[/tex]

Part B:

For Mg:

Magnesium (Mg) has 12 electrons so it requires 2 electrons to lose to achieve stable configuration.

Charge is [tex]Mg^{2+}[/tex]

Full ground-state electron configuration of the mono atomic ion:

[tex]1s^2 2s^22p^6[/tex]

Part C:

For Se:

Selenium (Se) has 34 electrons and requires two electrons to be stable.

Charge is [tex]Se^{2-}[/tex]

Full ground-state electron configuration of the mono atomic ion:

[tex]1s^2 2s^22p^63s^23p^64s^23d^{10}4p^6[/tex]

The electron configuration of atoms or ions depends on the number of electrons present.

The electron configuration refers to the arrangement of electrons in an atom or ions. Electrons are arranged in energy levels and each energy level is composed of orbitals.

The monoatomic ion most likely formed by P is P^3-. The electron configuration of this ion is 1s2 2s2 2p6 3s2 3p6. This is because P is in group 15 and attains a stable octet by gaining three electrons.

The monoatomic ion most likely formed by Mg is Mg^2+. Mg is a group 2 element and attains a stable octet by loss of two electrons. The electron configuration of this ion is 1s² 2s² 2p^6.

Se is a group 16 element, the monoatomic ion formed by Se is Se^2-. Se attains a stable octet by gain of two electrons. The electron configuration of this ion is; 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6.

Learn more: https://brainly.com/question/5624100

Answer : The condensed ground-state electron configuration for each is:

(a) [tex][Ar]4s^24p^{1}[/tex]

(b) [tex][Ar]4s^23d^{10}[/tex]

(c) [tex][Ar]4s^23d^{1}[/tex]

Explanation :

Electronic configuration : It is defined as the representation of electrons around the nucleus of an atom.

Number of electrons in an atom are determined by the electronic configuration.

Noble-Gas notation : It is defined as the representation of electron configuration of an element by using the noble gas directly before the element on the periodic table.

(a) The given element is, Ga (Gallium)

As we know that the gallium element belongs to group 13 and the atomic number is, 31

The ground-state electron configuration of Ga is:

[tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^1[/tex]

So, the condensed ground-state electron configuration of Ga in noble gas notation will be:

[tex][Ar]4s^24p^{1}[/tex]

(b) The given element is, Zn (Zinc)

As we know that the zinc element belongs to group 12 and the atomic number is, 30

The ground-state electron configuration of Zn is:

[tex]1s^22s^22p^63s^23p^64s^23d^{10}[/tex]

So, the condensed ground-state electron configuration of Zn in noble gas notation will be:

[tex][Ar]4s^23d^{10}[/tex]

(c) The given element is, Sc (Scandium)

As we know that the scandium element belongs to group 3 and the atomic number is, 21

The ground-state electron configuration of Sc is:

[tex]1s^22s^22p^63s^23p^64s^23d^{1}[/tex]

So, the condensed ground-state electron configuration of Sc in noble gas notation will be:

[tex][Ar]4s^23d^{1}[/tex]

Answer:

Yes, the 150-mL Erlenmeyer will be large enough to contain the acid.

Explanation:

As an instructor is preparing for an experiment, he requires 225 g phosphoric acid. Considering that the density of the phosphoric acid is 1.83 g/mL, we can find the volume occupied by the acid using the following expression.

density = mass / volume

volume = mass / density

volume = 225 g / (1.83 g/mL)

volume = 123 mL

The phosphoric acid occupies 123 mL so the 150-mL Erlenmeyer will be large enough to contain it.

Answer:

For a: The charge on the ion formed is +3

For b: The charge on the ion formed is -2

For c: The charge on the ion formed is +2

Explanation:

An ion is formed when an atom looses or gains electron.

For the given options:

Aluminium is the 13th element of the periodic table having electronic configuration of [tex]1s^22s^22p^63s^23p^1[/tex]

This element will loose 3 electrons to form [tex]Al^{3+}[/tex] ion

The charge on the ion formed is +3

Sulfur is the 16th element of the periodic table having electronic configuration of [tex]1s^22s^22p^63s^23p^4[/tex]

This element will gain 2 electrons to form [tex]S^{2-}[/tex] ion

The charge on the ion formed is -2

Strontium is the 38th element of the periodic table having electronic configuration of [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^65s^2[/tex]

This element will loose 2 electrons to form [tex]Sr^{2+}[/tex] ion

The charge on the ion formed is +2

Amino acids are more soluble in aqueous solvent at pH extremes due to their charged nature, which increases their solubility in polar solvents. The neutral charge of an amino acid at its isoelectric point makes it hydrophobic and less soluble. At very low or very high pH, amino acids have increased charge and form more salt bonds with water, increasing their solubility.

This phenomenon can be explained by the properties of amino acids at different pH values. At the isoelectric point (pI), the amino acid is neutral, which makes it hydrophobic and less soluble in water (option A). At pH extremes, the amino acid molecules mostly carry a net charge, which increases their solubility in polar solvents (option B). In addition, at very low or very high pH, the amino acid molecules have increased charge and form more salt bonds with water solvent molecules, further enhancing their solubility (option C).

Answer:

For a: The number of inner electrons, outer electrons and valence electrons are 28, 7 and 7 respectively.

For b: The number of inner electrons, outer electrons and valence electrons are 54, 1 and 1 respectively.

For c: The number of inner electrons, outer electrons and valence electrons are 23, 1 and 1 respectively.

For d: The number of inner electrons, outer electrons and valence electrons are 36, 2 and 2 respectively.

For e: The number of inner electrons, outer electrons and valence electrons are 2, 7 and 7 respectively.

Explanation:

Outer shell electrons are the electrons which are not tightly held by the electrons. They are called as valence electrons. The electrons present in the highest principle quantum number are known as valence electrons.

Inner shell electrons are the electrons which are tightly held by the electrons. They are called as core electrons.

Inner electrons = Total number of electrons - Valence electrons

Total number of electrons in an atom is equal to the atomic number of the element.

For the given options:

Bromine is the 35th element of the periodic table having electronic configuration of [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^5[/tex]

Highest principle quantum number is 4

Number of valence electrons = 7

Number of outer electrons = 7

Number of inner electrons = 35 - 7 = 28

Cesium is the 55th element of the periodic table having electronic configuration of [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^65s^24d^{10}5p^66s^1[/tex]

Highest principle quantum number is 6

Number of valence electrons = 1

Number of outer electrons = 1

Number of inner electrons = 55 - 1 = 54

Chromium is the 24th element of the periodic table having electronic configuration of [tex]1s^22s^22p^63s^23p^64s^13d^{5}[/tex]

Highest principle quantum number is 4

Number of valence electrons = 1

Number of outer electrons = 1

Number of inner electrons = 24 - 1 = 23

Strontium is the 38th element of the periodic table having electronic configuration of [tex]1s^22s^22p^63s^23p^64s^23d^{10}4p^65s^2[/tex]

Highest principle quantum number is 5

Number of valence electrons = 2

Number of outer electrons = 2

Number of inner electrons = 38 - 2 = 36

Fluorine is the 9th element of the periodic table having electronic configuration of [tex]1s^22s^22p^5[/tex]

Highest principle quantum number is 2

Number of valence electrons = 7

Number of outer electrons = 7

Number of inner electrons = 9 - 7 = 2

The number of inner, outer, and valence electrons for each element is as follows: Br has 2 inner electrons, 28 outer electrons, and 7 valence electrons; Cs has 2 inner electrons, 118 outer electrons, and 1 valence electron; Cr has 2 inner electrons, 24 outer electrons, and 6 valence electrons; Sr has 2 inner electrons, 36 outer electrons, and 2 valence electrons; F has 2 inner electrons, 7 outer electrons, and 7 valence electrons.

(a) Br has 2 inner electrons, 28 outer electrons, and 7 valence electrons.

(b) Cs has 2 inner electrons, 118 outer electrons, and 1 valence electron.

(c) Cr has 2 inner electrons, 24 outer electrons, and 6 valence electrons.

(d) Sr has 2 inner electrons, 36 outer electrons, and 2 valence electrons.

(e) F has 2 inner electrons, 7 outer electrons, and 7 valence electrons.

https://brainly.com/question/29276667

#SPJ3

Answer:

Explanation:

a ) period 4 noble gas is krypton

isoelectronic with it are Sr ⁺² and Br⁻

compound is SrBr₂

b ) Period 3 noble gas is Argon

isoelectronic with it are Mg⁺² and O⁻²

compound is MgO

c)  2+ ion is the smallest with a filled d subshell is Zn⁺² , smallest halogen

is F⁻

compound is ZnF₂

d )   ions  from the largest and smallest ionizable atoms in Period 2

Li⁺ and  F⁻

compound is LiF

The compounds resulting from the described ionic interactions are Strontium Sulfide (SrS), Magnesium Oxide (MgO), Iron(II) Fluoride (FeF2), and Beryllium Fluoride (BeF2).

The compound formed by ionic interactions can be determined by considering the properties of the ions given.  

https://brainly.com/question/3222171

#SPJ12

Answer:

At least 3 three extractions are required to recover at least 99.5 % of the material in the organic layer.

Explanation:

The partition coefficient of a solute (S) soluble in two immiscible solvents is given by the following formula

[tex]K_S=\frac{[S]_2}{[S]_1}[/tex]

The lower layer is taken as an aqueous layer (1), while the upper layer is organic (2). The fraction of solute remaining in the aqueous layer is given by the following formula

[tex]q^n=(\frac{V_1}{V_1 \times KV_2})^n[/tex]

Here, n denotes the number of extraction, and q^n represents the fraction of solute remaining in aqueous solvent after n number of extraction. According to the given data, the fraction of solute remaining in the aqueous layer after multiple extractions is 0.005, i.e., q^n=0.005. Mathematically,

[tex]0.005=(\frac{50}{50 + 50\times10})^n\\\\0.005=(0.091)^n[/tex]

Taking log on both sides

[tex]log(0.005)=nlog(0.091)[/tex]

[tex]log(0.005)=nlog(0.091)\\\\-2.301=-n1.04\\n=2.21[/tex]

The above calculations show that the number of extractions should be greater than 2, i.e, at least 3, in order to achieve extraction greater than 99.5 %.

With a partition coefficient of 10 and using 50mL each of water and ether, approximately three extractions are required to recover at least 99.5% of the material in the organic layer.

This question relates to an extraction process used in chemistry. The extraction process is governed by a partition coefficient, which is the ratio of the concentrations of a compound in the two solvents (organic layer and water in this case) at equilibrium. To calculate the number of extractions required to recover at least 99.5% of the material, we can use the formula:

Where D is the partition coefficient. By rearranging this equation, we get:

Substituting the given values into the equation, we find that approximately 3 extractions would be required in order to recover at least 99.5% of the material in the organic layer.

https://brainly.com/question/14653083

#SPJ3

Answer:

The reaction of hex-3-yne with one equivalent of HCl Is an Anti addition, see in the drawing the major product.

Explanation:

The mechanism of the reaction proceeds through a carbocation, formed in the most substituted carbon of the triple bond,  in this case it is indistinct because the triple bond is in the central carbons. Therefore, it is a regioselective reaction that follows Markovnikov's rule, adding the halogen to the more substituted carbon of the alkyne.

The anti addition consists in the addition of two substituents on opposite sides of a triple bond, which gives it greater stability.

When the plate separation of a charged parallel-plate capacitor is doubled, the stored energy becomes one-half as large due to the inverse relationship between capacitance and the distance between plates.

When a parallel-plate capacitor is disconnected from a battery and the plate separation is doubled, the stored energy changes in the following manner: The stored energy becomes one-half as large. This happens because the energy (U) stored in a capacitor is given by U = (1/2)CV2, where C is the capacitance and V is the voltage across the plates. When the capacitor is disconnected from the battery, the charge Q and voltage V across the plates remain constant.

However, the capacitance C of a parallel-plate capacitor is directly proportional to the area of the plates (A) and inversely proportional to the distance (d) between them, as given by C = ε0A/d, where ε0 is the vacuum permittivity. When distance d is doubled, capacitance C is halved, therefore, the energy stored, which is proportional to C, also halves because it is dependent on the capacitance.

Answer : The new molarity of glycerol in the photobacterium cell growth medium is, [tex]6.69\times 10^3\mu M[/tex]

Explanation :

Formula used :

[tex]M_1V_1=M_2V_2[/tex]

where,

[tex]M_1\text{ and }V_1[/tex] are the initial molarity and volume of glycerol.

[tex]M_2\text{ and }V_2[/tex] are the new molarity and volume of glycerol .

We are given:

[tex]M_1=81.3\mu M\\V_1=913mL\\M_2=?\\V_2=11.1mL[/tex]

Putting values in above equation, we get:

[tex]81.3\mu M\times 913mL=M_2\times 11.1mL\\\\M_2=6.69\times 10^3\mu M[/tex]

Hence, the new molarity of glycerol in the photobacterium cell growth medium is, [tex]6.69\times 10^3\mu M[/tex]

Final answer:

The new molarity of glycerol after the evaporation of the solvent from 913 mL to 11.1 mL is 6.69 × 10^6 µM, calculated using the conservation of moles and by adjusting the concentration for the reduced volume.

Explanation:

The molarity of a solution is defined as the number of moles of solute per liter of solution. When the solvent evaporates from a solution and the volume decreases, the molarity of the solute increases because the same amount of solute is now present in a smaller volume of solvent. The original volume of the photobacterium cell growth medium is 913 mL with a glycerol concentration of 81.3 µM (micro molar). The new volume of the cell growth medium after evaporation is 11.1 mL. To find the new molarity, we can use the concept of conservation of moles of solute, which states that the number of moles in the solution before and after evaporation are the same.

First, we convert the original volume from milliliters to liters:

913 mL = 0.913 L

Then we calculate the moles of glycerol originally in the solution:

moles of glycerol = (81.3 µM) × (0.913 L) = 0.0000813 moles/L × 0.913 L = 7.42449 × [tex]10^{-5}[/tex] moles

Since the amount of glycerol remains the same, and only the volume has changed, we can find the new molarity by dividing the moles of glycerol by the new volume in liters:

New volume in liters: 11.1 mL = 0.0111 L

New molarity = moles of glycerol / new volume
= 7.42449 × [tex]10^{-5}[/tex] moles / 0.0111 L

Performing the calculation gives us:

New molarity = 6.68873 M (rounded to three significant digits). However, this result is not in micro molarity. So to convert this to µM,

1 M = 1,000,000 µM

New molarity in µM = 6.68873 × 1,000,000 µM = 6.69 × 106 µM (or 6,690,000 µM, rounded to three significant digits)

Answer: The enthalpy change is 34.3 kJ

Explanation:

The conversions involved in this process are :

[tex](1):H_2O(s)(-18^0C)\rightarrow H_2O(s)(0^0C)\\\\(2):H_2O(s)(0^0C)\rightarrow H_2O(l)(0^0C)\\\\(3):H_2O(l)(0^0C)\rightarrow H_2O(l)(25^0C)[/tex]

Now we have to calculate the enthalpy change.

[tex]\Delta H=[m\times c_{s}\times (T_{final}-T_{initial})]+n\times \Delta H_{fusion}+[m\times c_{l}\times (T_{final}-T_{initial})][/tex]

where,

[tex]\Delta H[/tex] = enthalpy change = ?

m = mass of water = 72.0  g

[tex]c_{s}[/tex] = specific heat of ice = [tex]2.09J/g^0C[/tex]

[tex]c_{l}[/tex] = specific heat of liquid water = [tex]4.184J/g^0C[/tex]

n = number of moles of water = [tex]\frac{\text{Mass of water}}{\text{Molar mass of water}}=\frac{72.0g}{18g/mole}=4.00moles[/tex]

[tex]\Delta H_{fusion}[/tex] = enthalpy change for fusion = 6010 J/mole

Now put all the given values in the above expression, we get

[tex]\Delta H=[72.0g\times 2.09J/g^0C\times (0-(-18)^0C]+4.00mole\times 6010J/mole+[72.0g\times 4.184J/g^)C\times (25-0)^0C][/tex][tex]\Delta H=34279.8J=34.3kJ[/tex]        (1 KJ = 1000 J)

Therefore, the enthalpy change is 34.3 kJ

Final answer:

The total amount of heat energy required to convert 72.0 g of ice at − 18.0 °C to water at 25.0 °C is 34.2 kJ. This includes heating the ice to 0 °C, melting it, and then heating the water to 25.0 °C.

Explanation:

To calculate the amount of heat energy required in kilojoules to convert 72.0 g of ice at − 18.0 °C to water at 25.0 °C, we must consider three stages of the process: heating the ice to 0 °C, melting the ice, and then heating the resulting water to 25.0 °C.

The total energy Qtotal is the sum of Q1, Q2, and Q3, which is 2664 J + 23976 J + 7566 J = 34206 J.

To convert this value to kilojoules, we divide by 1,000: 34206 J / 1000 = 34.206 kJ. Therefore, the answer to three significant figures is 34.2 kJ.

Final answer:

The accuracy of an umpire knowing the position of a baseball depends on the speed of the baseball and the percentage uncertainty in that speed. The formula Δx = v × Δt can be used to calculate the uncertainty in the position of the baseball. For example, if the umpire measures the position of the baseball over a time interval of 1 second, the uncertainty in the position would be 44.7 meters.

Explanation:

The accuracy with which an umpire can know the position of a baseball depends on several factors, including the speed of the baseball and the percentage uncertainty in that speed.

Given that the baseball is moving at 100.0 mi/h ± 1.00% (44.7 m/s ± 1.00%), and assuming the umpire can accurately measure the speed, the uncertainty in the position of the baseball can be calculated using the formula:

Δx = v × Δt

where Δx is the uncertainty in the position, v is the velocity of the baseball, and Δt is the time interval over which the position is being measured.

For example, if the umpire measures the position of the baseball over a time interval of 1 second, the uncertainty in the position would be 44.7 m/s × 1 s = 44.7 meters.

Answer:

The mass of glucose that contains a million [tex]1.0\times 10^6[/tex] carbon atoms is [tex]4.98\times 10^{-17} g[/tex].

Explanation:

Number of carbon atoms = [tex]1.0\times 10^6 [/tex]

1 molecule of glucose has 6 carbon atoms, then [tex]1.01\times 10^6 [/tex] will be in N molecules of glucose:

[tex]N=\frac{1.0\times 10^6}{6}[/tex]molecules of glucose

1 mole = [tex]N_A=6.022\times 10^{23} molecules[/tex]

Moles of glucose = n

[tex]N=n\times N_A[/tex]

[tex]n=\frac{N}{N_A}=\frac{\frac{1.0\times 10^6}{6}}{6.022\times 10^{23}}[/tex]

[tex]n=2.768\times 10^{-19} moles[/tex]

Mass of [tex]2.768\times 10^{-19} [/tex] moles of glucose;

[tex]2.768\times 10^{-19} mol\times 180=4.9817\times 10^{-17} g\approx 4.98\times 10^{-17} g[/tex]

Calculate the mass of glucose C₆H₁₂O₆ that contains a million (1.0 × 10⁶) carbon atoms. Be sure your answer has a unit symbol if necessary, and round it to 2 significant digits.

The mass of glucose that contains a million carbon atoms is 5.04 × 10⁻⁷ g.

1 molecule of glucose contains 6 carbon atoms. The number of molecules of glucose that contain 1.0 × 10⁶ carbon atoms are:

[tex]1.0 \times 10^{6}\ C\ atoms \times \frac{1\ Glucose\ molecule}{6\ C\ atoms} = 1.7 \times 10^{5} \ Glucose\ molecule[/tex]

We will convert molecules into moles using Avogadro's number: there are 6.02 × 10²³ molecules in 1 mole of molecules.

[tex]1.7 \times 10^{5} \ molecule \times \frac{1mol}{6.02 \times 10^{23} \ molecule} = 2.8 \times 10^{-19} \ mol[/tex]

We will convert moles to mass using the molar mass of glucose (180.16 g/mol).

[tex]2.8 \times 10^{-19} \ mol \times \frac{180.16g}{1mol} =5.04 \times 10^{-7} g[/tex]

The mass of glucose that contains a million carbon atoms is 5.04 × 10⁻⁷ g.

You can learn more about Avogadro's number here: https://brainly.com/question/13302703

In a reaction between hydrogen chloride and oxygen to form water and chlorine gas, using the provided masses and the balanced chemical equation, hydrogen chloride is found to be the limiting reactant, leaving 14.8 g of excess oxygen gas after the reaction.

To solve this problem, we first need to write the balanced chemical equation for the reaction between hydrogen chloride (HCl) and oxygen (O₂) to form water (H₂O) and chlorine gas (Cl₂). The reaction is as follows:

4 HCl(g) + O₂(g) ⇒ 2 H₂O(g) + 2 Cl₂(g)

Using the given masses of reactants, we calculate the molar amounts of HCl and O₂. The molar mass of HCl is approximately 36.5 g/mol and that of O₂ is 32.0 g/mol. Thus:

53.2 g HCl x (1 mol HCl / 36.5 g) = 1.46 mol HCl

26.5 g O₂ x (1 mol O₂ / 32.0 g) = 0.828 mol O₂

According to the balanced equation, it takes 4 moles of HCl to react with 1 mole of O₂. So, we divide the molar amounts by their respective coefficients to find the limiting reactant:

1.46 mol HCl / 4 = 0.365 mol

0.828 mol O₂ / 1 = 0.828 mol

Since 0.365 mol < 0.828 mol, HCl is the limiting reactant. The reaction will consume all of the HCl, leaving some O₂ in excess. To find the amount of excess O₂, we calculate how much O₂ is needed to react with the available HCl:

1.46 mol HCl x (1 mol O₂ / 4 mol HCl) = 0.365 mol O₂ needed

We subtract the O₂ needed from the initial amount to find the excess:

0.828 mol O₂ - 0.365 mol O₂ = 0.463 mol excess O₂

0.463 mol O₂ x 32.0 g/mol = 14.8 g excess O₂

Therefore, the mass of the excess reactant O2 remaining is 14.8 g.