Answer:
There are 0.106 mol of glucose.Explanation:
1) Data:
a) Chemical formula: C₆H₁₂O₆
b) Molecular weight, MM = 180.16 g/mol
c) mass, m = 19.1 g
c) n = ?
2) Formula:
n = massi grams / MM3) Soltuion:
Substitute the data:
n = 19.1 g / 180.16 g/mol = 0.106 molThe significant figures start with the first non-zero digit after the decimal point, so they are 1, 0, and 6, i.e. three significant figures.
Final answer:
To find the number of moles of glucose in 19.1g, divide the mass of glucose by its molar mass (180.16 g/mol), resulting in approximately 0.106 moles.
Explanation:
The molecular weight of glucose (C6H12O6) is 180.16 grams per mole (g/mol). To calculate the number of moles in a given mass of glucose, we use the formula:
Number of moles = mass (g) / molar mass (g/mol)
For 19.1g of glucose, the calculation would be:
Number of moles = 19.1 g / 180.16 g/mol
This equals approximately 0.106 moles of glucose, which is the answer when expressed using three significant figures.
When calcium and chlorine react to form calcium chloride, which substance is reduced? *
calcium
clhorine
calcium chloride
not enough info
Answer:-
When the reaction takes place Ca is reduced or is an oxidizing agent.
Reaction:
Ca + 2Cl =CaCl2
Note: There is a +2 charge on Ca(Calcium) and -1 charge on each Cl-atom(Chlorine atom) hence the charges are cancelled. Therefore, the total charge on the whole compound is zero.
Explanation:-
• Reduction: gain of electron/electrons
gain of hydrogen
loss of oxygen
Oxidation: gain of oxygen
loss of hydrogen
loss of electron/electrons.
• Oxidizing agent/reduced
Reducing agent/oxidized
• The molecule that is oxidized loses an electron and the molecule that is reduced gains the electron that was lost by the oxidized molecule.
Answer:
[tex]\boxed{\text{Chlorine}}[/tex]
Explanation:
We must use oxidation numbers to decide which substance is reduced.
[tex]\rm \stackrel{\hbox{0}}{\hbox{Ca}} + \stackrel{\hbox{0}}{\hbox{ Cl}_{2} }\longrightarrow \stackrel{\hbox{+2}}{\hbox{Ca }}\stackrel{\hbox{-1}}{\hbox{Cl}_{2}}[/tex]
The oxidation number of Ca increases from 0 in Ca to +2 in CaCl₂.
The oxidation number of Cl decreases from 0 in Cl₂ to -1 in CaCl₂.
[tex]\text{A decrease in oxidation number is reduction, so } \boxed{\textbf{Cl$_{2}$ is the substance reduced.}}[/tex]
An unknown substance with a mass of 25 grams releases 550 joules of energy when undergoing a temperature increase of 10 degrees Celsius. What is the specific heat of that substance? Show your work in the space below.
Answer:
2.2 J/°C.g.
Explanation:
To solve this problem, we can use the relation:Q = m.c.ΔT,
where, Q is the amount of heat released by the unknown substance (Q = 550 J).
m is the mass of the unknown mass (m = 25.0 g).
c is the specific heat of the unknown substance (c = ??? J/°C.g).
ΔT is the difference between the initial and final temperature (ΔT = 10°C).
∴ c = Q/(m.ΔT) = (550 J)/(25.0 g)(10°C) = 2.2 J/°C.g.
Assuming equal concentrations and complete dissociation, rank these aqueous solutions by their freezing points.
Li2SO4
NH4I
CoCl3
Answer:
CoCl₃ > Li₂SO₄ > NH₄I.
Explanation:
Adding solute to water causes depression of the boiling point.The elevation in boiling point (ΔTf) can be calculated using the relation:ΔTf = i.Kf.m,
where, ΔTf is the depression in freezing point.
i is the van 't Hoff factor.
van 't Hoff factor is the ratio between the actual concentration of particles produced when the substance is dissolved and the concentration of a substance as calculated from its mass. For most non-electrolytes dissolved in water, the van 't Hoff factor is essentially 1.Kf is the molal depression constant of water.
m is the molality of the solution.
(1) Li₂SO₄:
i for Li₂SO₄ = no. of particles produced when the substance is dissolved/no. of original particle = 3/1 = 3.
∴ ΔTb for (Li₂SO₄) = i.Kb.m = (3)(Kf)(m) = 3(Kf)(m).
(2) NH₄I:
i for NH₄I = no. of particles produced when the substance is dissolved/no. of original particle = 2/1 = 2.
∴ ΔTb for (NH₄I) = i.Kb.m = (2)(Kf)(m) = 2(Kf)(m).
(3) CoCl₃:
i for CoCl₃ = no. of particles produced when the substance is dissolved/no. of original particle = 4/1 = 4.
∴ ΔTb for (CoCl₃) = i.Kb.m = (4)(Kf)(m) = 4(Kf)(m).
So, the ranking of the freezing point from the highest to the lowest is:CoCl₃ > Li₂SO₄ > NH₄I.
The reactant that controls the amount of product formed in a chemical reaction is called the?
Limiting reactant is the answer
How many moles of nitrogen we have at a temperature of 30 ?C, a pressure of 4.0 atm, and a volume of 4000.ML?
Answer:
0.643 mol.
Explanation:
We can use the general law of ideal gas: PV = nRT.where, P is the pressure of the gas in atm (P = 4.0 atm).
V is the volume of the gas in L (V = 4000 mL = 4.0 L).
n is the no. of moles of the gas in mol (n = ??? mol).
R is the general gas constant (R = 0.0821 L.atm/mol.K),
T is the temperature of the gas in K (T = 30ºC + 273 = 303 K).
∴ n = PV/RT = (4.0 atm)(4.0 L)/(0.0821 L.atm/mol.K)(303 K) = 0.643 mol.
P-xylene, c8h10, has an enthalpy of fusion of 158.3 j g-1 and its melting point temperature is 13.2°c. how much heat is required to transform 115 g of solid p-xylene at 13.2°c into liquid p-xylene, also at 13.2°c?
Answer:
[tex]\boxed{\text{18.2 kJ}}[/tex]
Explanation:
The formula for the heat involved is
[tex]q = m\Delta_{\text{f}}\text{H}[/tex]
Data:
m = 115 g
[tex]\Delta_{\text{f}}\text{H} = \text{158.3 J/g}[/tex]
Calculation:
[tex]q = \text{115 g} \times \dfrac{\text{158.3 J}}{\text{1 g}}\\\\q = \text{18 200 J} = \textbf{18.2 kJ}}\\\\\text{It takes }\boxed{\textbf{18.2 kJ}} \text{ to melt the p-xylene}[/tex]
How many liters of oxygen are required to produce 2 liters of water at stp?
Answer:
1 liter of oxygen is required to produce 2 liters of water at STPExplanation:
Water molecule is H₂O, which means that there is one oxygen atom per each water molecule.
The balanced chemical equation that represents this is:
2H₂(g) + O₂(g) → 2H₂O(g)The stoichiometric coefficents 1 for O₂ (g) and 2 for H₂O (g) means that two molecules of oxygen are required to produce two molecules of water.
STP stands for standard temperature and pressure. Those conditions are 273.15 K (0 °C, 32 °F) and 100 KPa of absolute pressure.
That means that the reaction is carried out at constant temperature and pressure.
Then, since the ideal gas law states that the at constant pressure and temperature the volume occupied by the gases is proportional to the number of particles (atoms or molecules), the molecular stoichiometric ratio of 1 molecule of O₂ (g) to 2 molecules for H₂O (g) is equivalent to the volumetric ratio 1 liter of O₂ to 2 liters of H₂O:
1 ltier O₂ : 2 liter H₂OHence, you conclude that 1 liter of oxygen is required to produce 2 liters of water, at STP.
C3H8(g) + 2O2(g) → 4H2O(g) + 3CO2(g)
ΔHreaction=2,220 kJ/mol
Calculate the enthalpy of combustion for 24.5g propane given the molecular weight of propane is 44.097 g/mol.
A)
723 kJ
B)
1,010 kJ
C)
1,230 kJ
D)
2,390 kJ
Answer:
Option C) 1,230 kJ
Explanation:
According to the data, 1 mol of propane liberates 2,220 kJ of energy when it is combusted. If we have 24.5 g of propane, this mass is equal to 0,56 mol (of propane):
44.097 g of propane---->1 mol
24.5 g of propane-------x= 0.56 mol
Then, the enthalpy of the described chemical reaction (propane´s combustion) is 2,220 kJ when 1 mol of propane is combusted, so:
1 mol propane---------->2,220 kJ of energy
0.56 mol propane (24.5 g)------------x= aproximately 1,24 kJ (which would be option C)
To calculate the enthalpy of combustion for 24.5g propane, divide the mass by the molecular weight to obtain the number of moles. Then, multiply the moles by the given enthalpy of reaction to find the enthalpy of combustion. The enthalpy of combustion for 24.5g propane is 1,230 kJ.
Explanation:To calculate the enthalpy of combustion for 24.5g propane, we need to first convert the mass of propane to moles. Dividing the mass by the molecular weight of propane gives us 24.5 g / 44.097 g/mol = 0.5558 mol. Then, we can use the equation given to calculate the enthalpy of combustion:
Enthalpy of combustion = ΔHreaction * moles of propane
Plugging in the values, we get:
Enthalpy of combustion = 2,220 kJ/mol * 0.5558 mol = 1,230 kJ
https://brainly.com/question/31292902
#SPJ3
_____ is a measurement of heat. A) Only warmth B) Only cold C) Warmth or cold D) Temperature
Answer:
C
Explanation:
Answer:
D
Explanation:measurement of heat The usual means of measuring temperature is a thermometer. It measures the degree or intensity of heat and usually consists of a glass tube with a bulb at the lower portion of the tube that contains mercury, colored alcohol, or a volatile liquid.
Explain two ways that voltaic cells and electrolytic cells are similar AND two ways that they differ.
How old is the moon? much older than Earth about the same age as Earth older than the sun much younger than Earth
Answer:
Much younger than Earth
Explanation:
The moon is believed to be much more younger than the earth.
The moon is earth's only natural satellite.
It is hypothesised that a planetary body as big as Mars collided with earth. The impact causes vapourization and hauling of materials from the earth crust and mantle.
The blasted particles and the matter were pulled together by gravity. These ones formed our satellite, the moon.
Some of the matter fell back to the earth surface.
The moon was formed after earth was formed and it is much younger than our blue planet.
The Moon is about the same age as Earth, approximately 4.5 billion years old, with lunar rock samples dating between 3.3 and 4.4 billion years, indicating a shared origin in the solar system.
The age of the Moon is a subject of geologic interest and has been determined through scientific investigation, particularly through the analysis of lunar rocks retrieved during the Apollo missions. Studies have revealed that the Moon and Earth have approximately the same age, which is in the vicinity of 4.5 billion years old. Radiometric age-dating of the lunar rocks has shown that the samples solidified between about 3.3 and 4.4 billion years ago, which are substantially older than most of the rocks found on Earth.
Therefore, when answering the student's question about the Moon's age, the best choice is 'about the same age as Earth'. While there are lunar rocks that are older than most of Earth's rocks, both Earth and Moon formed together in the same time frame, in the earlier days of the solar system.
Which of the following best describes what happens in radioactive decay?
a.The nucleus emits particles and/or energy.
b.The electron cloud emits particles and/or energy.
c.The nucleus transfers particles and/or energy to the electron cloud.
d.The electron cloud transfers energy to the nucleus.
A the nucleus emits partials and or energy
Calcium is obtained industrially by electrolysis of molten cacl2 and is used in aluminum alloys. how many coulombs are needed to produce 13.3 g of ca metal? if a cell runs at 15 a, how many minutes will it take to produce 13.3 g of ca(s)?
Answer:
64 000 C; 71 min
Explanation:
1. Number of coulombs
a. Write the equation for the half-reaction.
Ca²⁺ + 2e⁻ ⟶ Ca
b. Calculate the moles of Ca
Moles of Ca = 13.3 g Ca × (1 mol Ca/40.08 g Ca) = 0.3318 mol Ca
c. Calculate the moles of electrons
Moles of electrons = 0.3318 mol Ca × (2 mol electrons/1 mol Ca) = 0.6637 mol electrons
d. Calculate the number of coulombs
No. of coulombs = 0.6637 mol electrons × (96 485 C/1 mol electrons)
= 64 000 C
It takes 64 000 C to produce 13.3 g of Ca.
2. Time required
Q = It
t = Q/I = 64 000 C/15 C·s⁻¹ = 4270 s
t = 4270 s × 1 min/60 s = 71 min
The process will take 71 min.
What is the name of the functional group in the following compound?CH3-O-C-CH2-CH3
It is an ester functional group
Explain how you would determine the molar mass of C2H6.
Answer:-
Name of Chemical Compound: (if given otherwise not necessary) Ethane.
Chemical formula: C2H6.
Finding molar mass of Ethane(C2H6):-
Molar mass of Ethane = 12×2+1×6
Molar mass of Ethane = 2 + 6
Molar mass of Ethane = 30 g/mol
[ Note:
• Molar mass: Mass(is represented/taken in grams)of one mole of a substance.
• g/mol means grams per mole ].
Answer:
Molar mass of ethane is determined by adding atomic mass of all the constituent atoms.
Explanation:
Molar mass of a molecule is determined by adding all the atomic masses of constituent atoms.
In ethane molecule, there are two carbon atoms and six hydrogen atoms.
Atomic mass of carbon is 12g and atomic mass of hydrogen is 1g.
So molar mass of ethane is- [tex](2\times atomic mass of C)+(6\times atomic mass of H)[/tex] or [tex](2\times 12g)+(6\times 1g)[/tex] or 30g.
% composition
What is the percent composition of oxygen in the following compounds:
CO2
dinitrogen pentoxide
Answer:
1. Percentage composition O in CO₂ is 72.7%
2.Percentage composition of O in N₂O₅ is 74.1%
Explanation:
How to calculate percentage composition
I. Calculate the molar mass of the compound by summing up the atomic masses of the elements that makes up the compound
II. The percentage composition of the element is derieved by dividing the atomic mass of the atoms by the molar mass of the compound
III. Now express this ratio as a percentage.
1. Percentage composition of Oxygen in CO₂:
Molar mass of CO₂
Atomic mass of C = 12gmol⁻¹
Atomic mass of O = 16gmol⁻¹
Note: We have two atoms of Oxygen
Molar mass = [12 + (2x16)]gmol⁻¹
= (12 + 32)gmol⁻¹
= 44gmol⁻¹
Percentage composition O in CO₂
= (2x16)/44 x 100
= 32/44 x 100
= 0.727 x 100
= 72.7%
Percentage composition O in CO₂ is 72.7%
2. The percentage composition of O in N₂O₅
Atomic mass of N = 14gmol⁻¹
Atomic mass of O = 16gmol⁻¹
Molar mass of N₂O₅ = [(2x14) + (5x16)]gmol⁻¹
= (28 + 80)gmol⁻¹
= 108gmol⁻¹
Percentage composition of O in N₂O₅
= (5x16)/108 x 100
= 80/108 x 100
= 0.741 x 100
= 74.1%
Percentage composition of O in N₂O₅ is 74.1%
Note: Percentage composition is expressed as a percentage.
Final answer:
The percent composition of oxygen in CO2 is approximately 72.7%, and in dinitrogen pentoxide, it is approximately 74.1%. This is calculated by dividing the mass of oxygen in each molecule by the total molar mass of the molecule and then multiplying by 100%.
Explanation:
Percent Composition of Oxygen in Compounds
The percent composition of an element in a compound represents the mass percentage of that element in the total mass of the compound. To calculate the percent composition of oxygen in CO2 (carbon dioxide) and dinitrogen pentoxide, we need to look at the molar masses of these compounds and the elements within them.
CO2:
Carbon dioxide is composed of one carbon atom and two oxygen atoms. The molar mass of carbon is 12.01 g/mol and oxygen is 16.00 g/mol. Hence, the molar mass of CO2 equals 44.01 g/mol (12.01 + (16.00 × 2)). The mass of oxygen in CO2 is 32.00 g/mol, which we get from (16.00 × 2). To find the percent composition of oxygen in CO2, we divide the mass of oxygen by the molar mass of CO2 and multiply by 100%.
Percent composition of O in CO2 = (32.00 g/mol / 44.01 g/mol) × 100% ≈ 72.7%
Dinitrogen Pentoxide:
Dinitrogen pentoxide consists of two nitrogen atoms and five oxygen atoms. To calculate the percent composition of oxygen, we first find the molar mass of N2O5, which is 108.01 g/mol (14.01 × 2 + 16.00 × 5). The mass of oxygen in N2O5 is 80.00 g/mol, from (16.00 × 5). The percent composition of oxygen is then calculated as follows:
Percent composition of O in N2O5 = (80.00 g/mol / 108.01 g/mol) × 100% ≈ 74.1%
Which BEST describes the illustration below?
A pure substance made of a compound
A pure substance made of an element
A mixture made up of different compounds
A mixture made up of different elements
Answer:
KIKOKEN
Explanation:
What kind of decay must have occurred given the reaction below?
These are two questions and two complete answers.
Answers:
Question #5.: alpha decayQuestion #6.: SnExplanation:
A) Question #5.
The figure shows that the parent nuclide is [tex]^{222}_{86}Ra[/tex] and the daughter nuclide is [tex]^{218}_{84}Po[/tex]
A mass number balance and an atomic number balance show the features of the radiation emitted.
a) Mass number balance:
The mass number is the superscript to the left of the chemical symbol and is the amount of protons and neutrons in the nucleus of the atom.
222 = x + 218 ⇒ x = 222 - 218 = 4Hence, the mass number of the unknown emitted particle is 4.
b) Atomic number balance.
The atomic number is the subscript to the left of the chemical symbol and is the number of protons in the nucleus of the atom.
86 = x + 2 ⇒ x = 86 - 2 = 84.Hence, the atomic number (number of protons) of the unknown emitted particle is 2.
Conclusion: the emitted particle is a particle with 2 protons and 2 neutrons, which is a nucleus of helium, ⁴₂He, also called alpha particle, and the reaction is named alpha decay.
B) Question #6
Again, a mass number balance and an atomic number balance will tell which element is the missing product in the reaction.
The reaction is:
[tex]^{233}_{92}U+^1_0n{->}^{99}_{42}Mo+3^1_0n+?[/tex]
a) Atomic number balance:
92 + 0 = 42 + 3(0) + x ⇒ x = 92 - 42 = 50Hence, the missing product has atomic number 50 which permits to tell that it is an atom of tin (Sn).
b) Mass number balance:
233 + 1 = 99 + 3(1) + x ⇒ x = 233 + 1 - 99 - 3 = 132Which means that the missing product has a 132 neutrons and protons:
50 protons (determined above) and 132 - 50 = 82 neutrons.The symbol of this atom is:
[tex]^{132}_{50}Sn[/tex]What fraction of a sample is left after exactly 3 half-lives?
(1/2)^3 is the fraction of a sample after 3 half lives
At 66.0 ∘c , what is the maximum value of the reaction quotient, q, needed to produce a non-negative e value for the reaction so42−(aq)+4h+(aq)+2br−(aq)⇌br2(aq)+so2(g)+2h2o(l) in other words, what is q when e=0 at this temperature?
The value of q when e = 0 at the given temperature in the question is :
Q = 1.3 * 10⁻²⁶
Determine the value of q when e = 0Given that
E = 0, ΔG = -nFE,
therefore ΔG = 0
Also
Given that
ΔG = ΔG° + RTIn q
ΔG° = - RTIn q
Hence ; Q = e^ (nFE°cell / RT) -- ( 1 )
where : n = 2, F = 96500, E°cell = -0.87 volt, R = 8.314, T = 339 k
insert values into equation ( 1 )
Q = 1.3 * 10⁻²⁶
Note : E°cell = reduction half reaction + oxidation half reaction
= 0.20 volt - 1.07 volt = -0.87 volt.
Hence we can conclude that The value of q when e = 0 at the given temperature in the question is : Q = 1.3 * 10⁻²⁶
Learn more about reaction quotient : https://brainly.com/question/26712920
The following reaction has an activation energy of 262 kJ/mol.
C4H8(g) ---> 2C2H4(g)
At 600.0 K the rate constant is 6.1*10^-8s^-1. What is the value of the rate constant at 750.0 K?
Answer: i really dont know srry
Explanation:
What is the boiling point of a solution of .1 mole of glucose in 200 ml of water?
The boiling point of a 0.1 mole glucose in 200 ml water solution is approximately 100.255°C at 1 atm, after calculating the molality as 0.5 m and applying the molal boiling point elevation constant for water of 0.51°C/m.
The question asks: What is the boiling point of a solution of .1 mole of glucose in 200 ml of water? To calculate this, we need to first determine the molality (m) of the glucose solution since we have the molal boiling point elevation constant (Kb) for water, which is 0.51°C/m.
The molality (m) is calculated by the number of moles of solute per kilogram of solvent (water in this case). Given that 0.1 mole of glucose is dissolved in 200 ml (or 0.2 kg) of water, the solution's molality would be 0.5 m (0.1 mole / 0.2 kg). Since the constant Kb is 0.51°C/m, the boiling point elevation would be 0.5 m x 0.51°C/m = 0.255°C.
The normal boiling point of water is 100°C at 1 atm. We add the boiling point elevation to this to get the boiling point of the glucose solution: 100°C + 0.255°C = 100.255°C. Therefore, the boiling point of the given glucose solution would be approximately 100.255°C at 1 atm.
Select the true statement for the following reaction: N2 + 3 H2 → 2 NH3 1. Each N atom is reduced from 0 to +3. Each H atom is oxidized from 0 to −1. 2. Each N atom is reduced from 0 to −3. Each H atom is oxidized from 0 to +1. 3. Each N atom is oxidized from 0 to +3. Each H atom is reduced from 0 to −1. 4. Each N atom is oxidized from 0 to −3. Each H atom is reduced from 0 to +1. 5. Each N atom is reduced from +1 to −3. Each H atom is oxidized from +1 to 0. 6. Each N atom is oxidized from +1 to +3. Each H atom is reduced from +1 to 0. 7. Each N atom is oxidized from 0 to −6. Each H atom is reduced from 0 to +2. 8. Each N atom is reduced from 0 to −6
In the reaction N2 + 3 H2 → 2 NH3, each nitrogen atom is reduced from 0 to -3, and each hydrogen atom is oxidized from 0 to +1. This is an oxidation-reduction reaction where nitrogen gains electrons (reduction), and hydrogen loses electrons (oxidation).
Explanation:The correct statement for the provided reaction N2 + 3 H2 → 2 NH3 is: 'Each N atom is reduced from 0 to -3. Each H atom is oxidized from 0 to +1.' This reaction is an oxidation-reduction reaction, wherein the nitrogen atom is reduced (its oxidation number decreases from 0 to -3), and each hydrogen atom is oxidized (its oxidation number increases from 0 to +1).
In the process, nitrogen is gaining electrons, thus being reduced. On the other hand, hydrogen is losing electrons, thus being oxidized. This principle is aligned with the redox reactions wherein one element loses electrons (oxidation) and another element gains electrons (reduction). The reaction equation also follows the law of conservation of mass stating that matter cannot be created or destroyed.
Learn more about Oxidation-Reduction Reaction here:https://brainly.com/question/19528268
#SPJ12
More than DOUBLE POINTS!! Please help ASAP!! 1 hour left !!
Describe the structure of the water molecule and indicate how the structure is responsible for many of the unique properties of this vital compound.
Everything helps !! Giving BRAINLIEST to the most DETAILED answer!! Thanks in advance!! :)
A water molecule consists of two hydrogen atoms bonded to an oxygen atom, and its overall structureis bent. This is because the oxygen atom, in addition to forming bonds with the hydrogen atoms, also carries two pairs of unshared electrons.
Answer:
Explanation:
The structure of water molecule is very simple . it's has a central oxygen atom ( which has a valency of two ) . Since it's valency is two , it can two hydrogen atoms to both of it's sides ( which have a valency of one )
Structure :
H-O-H
Water is known as amphoteric substance , as it has the ability to act as either a base or an acid ( depending upon the substance it's reacting with ) . On top of that a very electro negative oxygen atom reacts with an electro positive hydrogen gives the molecule a strong bonding force ( which results in a molecule that is held by hydrogen bonding , which is a very strong attraction) . And when its bonded with some strong electro forces of attraction , Guess what happens ? It's boiling point increases !!!! ( It means you have to heat it up more to boil water ) . Which also means it has high heat of vaporization ( to get water into it's vapour state ) .all of that just because it has high forces if attraction between one another ...
Aluminum metal reacts with aqueous iron(II) chloride to form aqueous aluminum chloride and iron metal. What is the stoichiometric coefficient for aluminum when the chemical equation is balanced using the lowest, whole-number stoichiometric coefficients? Aluminum metal reacts with aqueous iron(II) chloride to form aqueous aluminum chloride and iron metal. What is the stoichiometric coefficient for aluminum when the chemical equation is balanced using the lowest, whole-number stoichiometric coefficients? 3. 1. 4. 2.
Answer:
2.
Explanation:
The balanced chemical equation for the reaction of aluminum metal reacts with aqueous iron(II) chloride to form aqueous aluminum chloride and iron metal is:2Al(s) + 3FeCl₂(aq) → 2AlCl₃(aq) + 3Fe(s).
It is clear that 2 mol of Al react with 3 mol of FeCl₂ to produce 2 mol of AlCl₃ and 3 mol of Fe.
So, the the stoichiometric coefficient for aluminum when the chemical equation is balanced is 2.The stoichiometric coefficient for aluminum, Al when the chemical equation is balanced is 2.
To obtain the stoichiometric coefficient for aluminum, we shall write and balance the equation for the reaction. This is illustrated below:
Aluminum => Al
Iron (II) chloride => FeCl₂
Aluminum chloride => AlCl₃
Iron => Fe
Aluminum + Iron (II) chloride —> Aluminum chloride + Iron
Al + FeCl₂ –> AlCl₃ + Fe
There are 3 atoms of Cl on the right side and 2 atoms on the left side. It can be balance by writing 3 before FeCl₂ and 2 before AlCl₃ as shown below:
Al + 3FeCl₂ –> 2AlCl₃ + Fe
There are 2 atoms of Al on the right side and 1 atom on the left. It can be balance by writing 2 before Al as shown below:
2Al + 3FeCl₂ –> 2AlCl₃ + Fe
There are 3 atoms of Fe on the left side and 1 atom on the right side. It can be balance by writing 3 before Fe as shown below:
2Al + 3FeCl₂ –> 2AlCl₃ + 3Fe
Now, the equation is balanced.
The coefficient of Aluminum, Al in the balanced equation is 2.
Learn more about balancing equation:
https://brainly.com/question/2399130
One benefit of nuclear fission reactions is
Answer:
Produces energy that are useful in nuclear power plants
Explanation:
Nuclear fission is a the radioactive disintegration of a heavy nucleus into simpler ones. The fission process which initiates a chain reaction releases a lot of neutrons and a large amount of energy.
The energy released in a fission process is very useful in nuclear power plants for producing electricity.
What is the first step in most stoichiometry problems?
Answer:
The first step in most stoichiometry problems is to balance the chemical equation.Explanation:
Stoichiometry is the cuantitative study of the chemical reactions.
It is like algebra applied to chemical equations.
The cuantitative relations between the amount of reactants and products is determined by the law of conservation of mass: the number of each kind of atoms in the reactants must equal the number of the same kind of atoms in the products.
Once that relation has been established, as mole ratios, then it can be determined the amount of reactant neeed to obtain a certain amount of product, or vice versa, determine the amount of product that can be obtained from a given amount of reactants.
That is why, after you know the reactants and products in a chemical equation you must balance to assure that the relative amounts are properly established.
Final answer:
The first step in most stoichiometry problems is to plan the problem by writing and balancing the chemical equation correctly, which is foundational for accurate stoichiometry calculations.
Explanation:
The first step in most stoichiometry problems is to plan the problem. This typically involves writing and balancing the chemical equation. Ensuring that all formulas are correct and balanced is crucial as it lays the foundation for all subsequent calculations in the stoichiometry process. Once the equation is balanced, you can proceed to write the ionic and net ionic equations if necessary, assign oxidation numbers, or derive stoichiometric factors to relate the amounts of substances involved. It is also important to identify the 'given' information and what the problem is asking you to 'find,' as well as list other known quantities.
how many moles of water would form the reaction of exactly 58.3 grams of magnesium hydroxide
Answer:
[tex]\boxed{\text{2.00 mol}}[/tex]
Explanation:
We know we will need a balanced chemical equation with masses and molar masses, so, let's gather all the information in one place.
You don't tell us what the reaction is, but we can solve the problem so long as we balance the OH.
M_r: 58.32
Mg(OH)₂ + … ⟶ … + 2HOH
m/g: 58.3
(a) Moles of Mg(OH)₂
[tex]\text{Moles of Mg(OH)$_{2}$} =\text{58.3 g Mg(OH)$_{2}$} \times \dfrac{\text{1 mol Mg(OH)$_{2}$}}{\text{58.32 g Mg(OH)$_{2}$}}\\\\=\text{0.9997 mol Mg(OH)$_{2}$}[/tex]
(b) Moles of H₂O
The molar ratio is 2 mol H₂O = 1 mol Mg(OH)₂.
[tex]\text{Moles of H$_{2}$O}= \text{0.9995 mol Mg(OH)$_{2}$} \times \dfrac{\text{2 mol {H$_{2}$O}}}{ \text{1 mol Mg(OH)$_{2}$}}\\\\= \textbf{2.00 mol H$_{2}$O}[/tex]
The reaction will form [tex]\boxed{\textbf{2.00 mol}}[/tex] of water.
When 58.3 grams of magnesium hydroxide react, it forms 2 moles of water. This is determined through the conversion of grams to moles and using the stoichiometry of the reaction.
Explanation:To find out how many moles of water would form the reaction of exactly 58.3 grams of magnesium hydroxide, we need to convert grams of Mg(OH)2 to moles and then use stoichiometry to find out the number of moles of H2O produced.
The molecular weight of Mg(OH)2 is 58.3197 g/mol. Therefore, the number of moles of Mg(OH)2 is given by:
Mass (g) / Molecular weight (g/mol) = 58.3g / 58.3197g/mol = 1 mole Mg(OH)₂
According to the reaction Mg(OH)2 -> Mg²⁺ + 2OH⁻, 1 mole of magnesium hydroxide decomposes to form 1 mole of magnesium ions and 2 moles of hydroxide ions. Therefore, 1 mole of Mg(OH)₂ reacts to form 2 moles of water.
So, 1 mole of Mg(OH)2 would result in the formation of 2 moles of water. Hence, 58.3 grams (which correspond to 1 mole) of Mg(OH)2 would form 2 moles of water.
Learn more about Stoichiometry here:https://brainly.com/question/30218216
#SPJ3
What change in the mass number of a nucleus occurs when the nucleus emits an alpha particle? 1. The mass number decreases by 2. The mass number decreases by 4. The mass number increases by 4 The mass number increases by 2.
Alpha particles are respective to the helium-4 ion. Therefore it has a mass of four and a positive charge of two. The correct answer is the mass number increases by 4.
If a nucleus emits an alpha particle, the mass number decreases by 4
What is an alpha particle?An alpha particle is essentially identical to a helium nucleus. An alpha particle has a mass of four units and a positive charge of two units just as the helium nucleus.
Hence, if a nucleus emits an alpha particle, the mass number decreases by 4 while the atomic number decreases by two.
Learn more about alpha particle: https://brainly.com/question/12034258
The innermost electron shell of an atom can hold up to _____ electrons.
Answer:
The innermost electron shell of an atom can hold up to 2 electrons.Explanation:
The innermost electron shell is the lowest principal energy level, i.e n = 1.
For n = 1 there is only one orbital, the 1s orbital.
As stated by the Pauli's exculsion principle an orbital may have a maximum of two electrons, and they have opposed spins.
Then, the innermost electron shell has just one orbital and, in consequence, can hold up to 2 elecrons.
The innermost electron shell of an atom can hold up to two electrons.
Explanation:The innermost electron shell of an atom, also known as the first shell or K-shell, can indeed hold a maximum of 2 electrons. This is often based on the quantum mechanical model of the atom, where the electrons are organized into various shells and subshells.
In addition to this, the first shell consists of only one subshell, called the 1s subshell, which accommodates a maximum of 2 electrons. The distribution of electrons in shells and subshells is a fundamental aspect of atomic structure and determines the chemical properties of elements, as well as their interactions in chemical reactions and bonding.