Explanation:
For the given question, distance is given on x-axis and force is given on y-axis. Both distance and force are showing an interval of 5 with starting point 0.
Hence, work in 5 m to 12.5 m is equal and opposite to 12.5 m to 20 m. Since, work is equal then it means that kinetic energy at 5 m will also be equal to the kinetic energy at 20 m.
Therefore, we can conclude that the kinetic energy of the 2 kg object when d equals 20 m is the same as when d is most nearly 5 m.
Final answer:
The velocity of the 2 kg object when d equals 20 m is most nearly 20.4 m/s.
Explanation:
The equation for kinetic energy is K = 1/2mv^2, where K is the kinetic energy, m is the mass, and v is the velocity of the object. To find the velocity when d equals 20m, we can use the equation K = 1/2mv^2 and rearrange it to solve for v. We know the mass of the object is 2kg and the kinetic energy is the same, so we can set up the equation as follows:
1/2(2kg)(v)^2 = 1/2(2kg)(20.4m/s)^2
Simplifying the equation, we find that v is approximately 20.4m/s. Therefore, when d equals 20m, the velocity of the object is most nearly 20.4m/s.
Which of the following is a small electronic component made up of transistors (tiny switches) and other miniaturized parts?
a.
Peripheral
b.
Integrated circuit (IC)
c.
Tablet
d.
Mouse
e.
Vacuum tube
Answer:
Integrated circuit (IC)
Explanation:
An integrated circuit ( IC ) is a semiconductor which contains multiple electronic components
interconnected to form a complete electronic function. Integrated circuits are the most essential part of all electronic products.
Modern integrated circuits contain as much as billions of circuit components such as transistors , diodes , resistors , and capacitors
onto a single monolithic die .
The correct answer is option b. An Integrated Circuit (IC), or microchip, is a small electronic component consisting of transistors and miniaturized parts etched onto a piece of silicon, pivotal in the development and miniaturization of electronic devices
The small electronic component made up of transistors (tiny switches) and other miniaturized parts is called an Integrated Circuit (IC). An Integrated Circuit, sometimes referred to as a microchip, is an electronic circuit of transistors etched onto a small piece of silicon. This technology allows for complex circuitry to be compacted into a tiny chip, which is crucial for the functionality of modern electronic devices like computers and cell phones. The invention of the IC was pivotal in launching the modern computer revolution because it significantly reduced the size and complexity of electronic devices, replacing bulky vacuum tubes and complicated wiring with a compact, efficient solution.
Integrated Circuits are designed to handle both analog and digital signals, but in the realm of digital electronics, they are essential for managing binary code, the series of ones and zeroes that computers use to process data. This is achieved through the hundreds, thousands, or even millions of transistors that can act as on-off switches within a single IC. The miniaturization and efficiency of ICs have been fundamental in advancing the technological capabilities of electronic devices, making them smaller, faster, and more accessible to the general public.
If the magnitude of the resultant force acting on the eyebolt is 570 N and its direction measured clockwise from the positive x axis is θ = 33 ∘, determine the magnitude of
Answer:
F1 = 1210.65 N
Q = 65.7081 degrees
Explanation:
Sum of Forces in x - direction:
F1 * cos (Q) + F2*sin(30) - F3*(3/5) = Fres*cos (theta)
F1 * cos (Q) + (500)*(0.5) - 450*(3/5) = 570*cos(33)
F1*cos (Q) = 498.0422237 N .... Eq1
Sum of Forces in y - direction:
F1 * sin (Q) - F2*sin (60) - F3 * (4/5) = Fres*sin (theta)
F1 * sin (Q) - 500*sin(60) - 450 * (4/5) = 570*sin (33)
F1 * sin (Q) = 1103.45692 N .... Eq 2
Divide Eq 2 by Eq 1
tan (Q) = 2.21558916
Q = arctan (2.21558916) = 65.7081 degrees
F1 = 1210.65 N
In the hydrogen atom, what is the total energy of an electron that is in an orbit that has a radius of 8.784 × 10^(-10) m?
The total energy of an electron in a hydrogen atom with a given orbit radius can be determined using the formula E = -13.6 eV / n². By calculating the principal quantum number n from the given radius, we can find the total energy of the electron. In this case, the total energy is -3.4 eV.
Explanation:The total energy of an electron in the hydrogen atom can be determined using the formula:
E = -13.6 eV / n²
where E is the energy, n is the principal quantum number, and eV represents electron volts.
Given that the radius of the electron's orbit is 8.784 × 10⁽⁻¹⁰⁾ m, we can find the value of n using the formula for the radius of the nth orbit:
r = 0.529 × n² / Z Å
where r is the radius, n is the principal quantum number, and Z is the atomic number. Assuming the atomic number for hydrogen is 1, solving for n gives us:
n = √(r * Z / 0.529)
Substituting the given values, we find that n = 2.
Finally, plugging in n into the energy formula, we find:
E = -13.6 eV / (2²) = -3.4 eV
A 1.50 kg rock whose density is 4700 kg/m3 is suspended by a string such that half of the rock's volume is under water.
What is the tension in the string?(In N)
Answer:
Tension T = 13.14N
Explanation:
Given:
Mass of rock m = 1.50kg
Density of rock p = 4700kg/m^3
Volume of rock V = mass/density = m/p
V = 1.50kg/4700kg/m3 = 3.19×10^-4m3
Taking the summation of forces acting on the rock;
T-W+Fb = 0
T = W - Fb .....1
T = tension
W = weight of rock
Fb = buoyant force
Fb = pw(0.5V)g = density of water × Volume under water×™ acceleration due to gravity
g = 9.8m/s^2
T = mg - pw(0.5V)g
T = 1.50×9.8 - 1000kg/m^3 ×0.5(3.19 × 10^-4) × 9.8
T = 13.14N
Final answer:
To find the tension in the string, we can use the concept of buoyancy. By equating the buoyant force and weight of the rock, we can solve for the tension. The tension will be equal to the weight of the rock minus the buoyant force.
Explanation:
In order to find the tension in the string, we can use the concept of buoyancy. Since half of the rock's volume is under water, it experiences an upward buoyant force equal to the weight of the water displaced by that volume. The buoyant force can be found using the following equation:
Buoyant force = density of water * volume of water displaced * acceleration due to gravity
The weight of the rock is equal to its mass multiplied by the acceleration due to gravity.
By equating the buoyant force and weight of the rock, we can solve for the tension in the string. The tension will be equal to the weight of the rock minus the buoyant force.
ou plan to excite electrons in a material by exposing it laser radiation. If you want to jump electrons from the 2 shell to the 6 shell, what wavelength of laser should you use
Answer:
[tex]410.2 nm[/tex]
Explanation:
We are given that
[tex]n_1=2,n_2=6[/tex]
We have to find the wavelength of laser should you used.
We know that
[tex]\frac{1}{\lambda}=R(\frac{1}{n^2_1}-\frac{1}{n^2_2})[/tex]
Where [tex]R=1.097\times 10^7/m[/tex]=Rydberg constant
[tex]\lambda[/tex]=Wavelength
Using the formula
[tex]\frac{1}{\lambda}=1.097\times 10^7(\frac{1}{2^2}-\frac{1}{6^2})[/tex]
[tex]\frac{1}{\lambda}=1.097\times 10^7(\frac{1}{4}-\frac{1}{36})[/tex]
[tex]\frac{1}{\lambda}=1.097\times 10^7(\frac{9-1}{36}=1.097\times 10^7\times \frac{8}{36}[/tex]
[tex]\frac{1}{\lambda}=\frac{1.097\times 10^7}{4}[/tex]
Using identity:[tex]\frac{1}{a^x}=a^{-x}[/tex]
[tex]\lambda=\frac{4}{1.097}\times 10^{-7}[/tex]=[tex]4.102\times 10^{-7} m[/tex]
1 nm=[tex]10^{-9} m[/tex]
[tex]\lambda=4.102\times 100 \times 10^{-9}=410.2\times 10^{-9} [/tex] m=410.2 nm
Hence, the wavelength of laser=[tex]410.2 nm[/tex]
Two runners start simultaneously from the same point on a circular 200-m track and run in the same direction. One runs at a constant speed of 6.20 m/s and the other runs at a constant speed of 5.50 m/s. g
Answer
given,
speed of the fastest runner = 6.2 m/s
speed of the slower runner = 5.5 m/s
Assume, we need to calculate time when both the runner meet for the first time.
distance cover by the fast runner = distance cover by the slow runner
6.2 t = 5.5 t + 200
0.7 t = 200
t = 285.71 s
time after which both the runner meet.
Distance they covered after starting
D = s x t
D = 6.2 x 285.71
D = 1771.43 m.
now, calculating the second time both will meet.
they will take double time to meet again
t' = 2 x 285.71
t '= 571.42 s
Two point sources produce waves of the same wavelength that are in phase. At a point midway between the sources, you would expect to observea) constructive or destructive interference depending on the wavelength.b) destructive interferencec) no interferenced) constructive interferencee) alternating constructive and destructive interference interference
Answer:
Constructive Interference.
Explanation:
Constructive Interference.
Definition:
Two waves meet in such a way their highs(Crests) combine to form a new waves whose magnitude is the sum of magnitude of combining waves.
Since two waves have same wavelength and are in phase so when they combine they well form a way which has the magnitude equal to the sum of the magnitude of both waves.
Reasons why it is Constructive Interference:Waves
Have Same wavelengthAre in phase (Can have phase difference of 2πHave crests aligned with each other (Appear at same point)A neutron star is the remnant left after certain supernovae (explosions of giant stars). Typically, neutron stars are about 17 km in diameter and have around the same mass as our sun. What is a typical neutron star density in g/cm3
To solve this concept we will apply the mathematical equations concerning the calculation of Volume in a sphere and the relation of density as a function of mass and volume, that is
The volume of the neutron star is
[tex]V = \frac{4\pi }{3}R^3[/tex]
[tex]V = \frac{4 \pi}{3} (\frac{17*10^{5}cm}{2})^3[/tex]
[tex]V = 25.72^{17}cm^3[/tex]
Now the density of the neutron star is
[tex]\rho = \frac{M}{V}[/tex]
[tex]\rho = \frac{1.989*10^{30}kg(\frac{10^3g}{1kg})}{25.72*10^{17}cm^3}[/tex]
[tex]\rho = 7.733*10^{14}g/cm^3[/tex]
Therefore the density of the neutron star is [tex]\rho = 7.733*10^{14}g/cm^3[/tex]
The sound source of a ship’s sonar system operates at a frequency of 22.0 kHz . The speed of sound in water (assumed to be at a uniform 20∘C) is 1482 m/s . What is the difference in frequency between the directly radiated waves and the waves reflected from a whale traveling straight toward the ship at 4.95 m/s ? Assume that the ship is at rest in the water.
Your target variable is Δf, the magnitude of the difference in frequency between the waves emitted from the sonar device and the waves received by the device after reflecting off the whale. Write an expression for Δf in terms of the relevant frequencies using the subscript notation introduced above.
Express your answer in terms of some or all of the variables fLe, fLr, fSe, and fSr.
Δf =
Answer:
[tex]\Delta f=f_{Lr}-f_{Se}[/tex]
147.45 Hz
Explanation:
v = Speed of sound in water = 1482 m/s
[tex]v_w[/tex] = Speed of whale = 4.95 m/s
Frequency of the wave in stationary condition
[tex]f_{Lr}=f\dfrac{v+v_w}{v-v_w}[/tex]
Ship's frequency which is reflected back
[tex]f_{Se}=f\dfrac{v}{v-v_w}[/tex]
The difference in frequency is given by
[tex]\Delta f=f\dfrac{v+v_w}{v-v_w}-f\dfrac{v}{v-v_w}\\\Rightarrow \Delta f=f_{Lr}-f_{Se}[/tex]
[tex]\mathbf{\Delta f=f_{Lr}-f_{Se}}[/tex]
[tex]f_{Lr}=22\times \dfrac{1482+4.95}{1482-4.95}\\\Rightarrow f_{Lr}=22.14745\ kHz[/tex]
[tex]f_{Se}=22\ kHz[/tex]
[tex]\Delta f=f_{Lr}-f_{Se}\\\Rightarrow \Delta f=22.14745-22\\\Rightarrow \Delta f=0.14745\ kHz\\\Rightarrow \Delta f=147.45\ Hz[/tex]
The difference in wavelength is 147.45 Hz
A boat is traveling at 3.2 m/s in the same direction as an ocean wave of wavelength 30 m and speed 6.8 m/s. If the boat is on the crest of a wave, how much time will elapse until the boat is next on a crest?
To solve this problem we apply the kinematic equations of linear motion. For which the speed is described as the distance traveled in a time interval. This would be,
[tex]v = \frac{x}{t} \rightarrow t = \frac{x}{v}[/tex]
Our values are given as,
[tex]\text{The speed of the boat} = v_b = 3.8m/s[/tex]
[tex]\text{The speed of the ocean} = V = 6.8m/s[/tex]
[tex]\text{The wave length of the wave is the same distance traveled by boat} = d = \lambda = 30m[/tex]
[tex]\text{The relative speed of the boat} = v_r = -3.8 +6.8 = 3m/s[/tex]
Replacing we have,
[tex]t = \frac{d}{v_r}[/tex]
[tex]t = \frac{30m}{3m/s}[/tex]
[tex]t = 10s[/tex]
Therefore will take until the boat is next on a crest around to 10s
Suppose a balloons was laying by the window at night. The next day, when the sun came up, it warmed the gas (air) that was in the balloon. What would be true about the density of the air in the balloon?
As the gas (air) in the balloon warms, it expands due to thermal expansion, causing its density to decrease. This lower density compared to the surrounding air leads to buoyancy, making the balloon rise.
Explanation:When the sun warms the gas (air) inside a balloon, the air expands due to an increase in temperature. This process, known as thermal expansion, causes the molecules in the air to move faster and spread out more, occupying a larger volume. As a result, the density of the air inside the balloon decreases because density is defined as mass per unit volume, and while the mass of the air remains constant, its volume increases. In the context of a hot air balloon, or any closed system where air is heated, this decrease in density compared to the cooler surrounding air leads to buoyancy. Buoyancy is the force that makes things float, which in the case of the balloon, causes it to rise since the hot air inside it is less dense than the cooler external environment.
a cat is on a merry-go-round that completes 1 full rotation in 6 seconds. The cat sits at a radius of 8.4 metres from the centre.
Find the minimum coefficient of friction to prevent the cat from sliding off.
To solve this problem we will use the concepts related to the uniform circular movement from where we will obtain the speed of the object. From there we will go to the equilibrium equations so that the friction force must be equal to the centripetal force. We will clear the value of the coefficient of friction sought.
The velocity from the uniform circular motion can be described as
[tex]v = \frac{2 \pi r}{T}[/tex]
Here,
r = Radius
T = Period
Replacing,
[tex]v = \frac{2\pi (8.4)}{6}[/tex]
[tex]v =8.7964 m/s[/tex]
From equilibrium to stay in the circle the friction force must be equivalent to the centripetal force, therefore
[tex]F_f = F_c[/tex]
[tex]\mu N = \frac{mv^2}{r}[/tex]
Here,
[tex]\mu =[/tex] Coefficient of friction
N = Normal Force
m = mass
v = Velocity
r = Radius
The value of the Normal force is equal to the Weight, then
[tex]\mu(mg) = \frac{mv^2}{r}[/tex]
Rearranging to find the coefficient of friction
[tex]\mu = \frac{v^2}{gr}[/tex]
Replacing,
[tex]\mu = \frac{(8.7964)^2}{(9.8)(8.4)}[/tex]
[tex]\mu =0.9399[/tex]
Therefore the minimum coefficient of friction to prevent the cat from sliding off is 0.9399
You are driving down the highway at 65 m p h, which is 29 m/s. Your tires have a radius of 0.30 m. a. How many times per second does each tire rotate? b. What is the speed of a point at the top of a tire, relative to the ground?
To solve this problem we will apply the concepts related to linear velocity and angular velocity to perform the respective conversion with the given values. To find the velocity in the upper part of the tire we will use the mathematical relation that expresses that it is twice the linear velocity. Let's start
PART A)
[tex]\omega = \frac{v}{r}[/tex]
[tex]\omega = \frac{29}{0.3}[/tex]
[tex]\omega = 96.66 rad/s[/tex]
Now we now that [tex]2\pi rad = 1 rev[/tex], then
[tex]\omega = 96.66rad/s (\frac{1 rev}{2\pi rad})[/tex]
[tex]\omega = 15.38rev/s[/tex]
PART B)
[tex]v = 2v_0[/tex]
[tex]v = 2(29)[/tex]
[tex]v = 58m/s[/tex]
What is the electric potential energy of a system that consists of two protons 2.1×10−15 m apart-as might occur inside a typical nucleus? Express your answer using two significant figures.
The electric potential energy of a system comprising two protons 2.1 x 10^-15 m apart can be calculated using Coulomb's law, which gives us a result of approximately 0.68 MeV.
Explanation:The electric potential energy of a system depends upon the charge of the components and the distance between them. In this case, we can calculate the electric potential energy using Coulomb's law which states that the electric potential energy 'V' between two charges is given by the equation V = k*q1*q2/r where 'k' is Coulomb's constant (8.99 × 10^9 N m^2/C^2), 'q1' and 'q2' are the two charges, and 'r' is the distance between the charges. Given that the charges are two protons, they both have the same charge (1.6 × 10^-19 Coulombs). The distance 'r' is given as 2.1 × 10^-15 m. Substituting these values in, we get: V = (8.99 × 10^9 N m^2/C^2)* (1.6 × 10^-19 C) * (1.6 × 10^-19 C) / (2.1 × 10^-15 m) which results in an electric potential energy of approximately 0.68 MeV (mega electron volts).
Learn more about Electric Potential Energy here:https://brainly.com/question/33051432
#SPJ3
The Sun orbits the Milky Way galaxy once each 2.60 x 10^8 y, with a roughly circular orbit averaging 3.00 x 10^4 light years in radius. (A light year is the distance traveled by light in 1 y.) Calculate the centripetal acceleration of the Sun in its galactic orbit..
Final answer:
To calculate the centripetal acceleration and average speed of the Sun in its galactic orbit, we utilize relevant formulas and astronomical data. The concept of centripetal acceleration is fundamental in understanding circular motion in celestial bodies like the Sun as it orbits the Milky Way galaxy.
Explanation:
Centripetal acceleration is the acceleration directed toward the center of a circular path. To calculate the centripetal acceleration of the Sun in its galactic orbit, we use the formula: a = v^2 / r, where v is the speed of the Sun and r is the radius of its orbit. Given that the Sun's orbit radius is 3.00 x 10^4 light years and it takes 2.60 x 10^8 years to orbit the Milky Way galaxy, we can also calculate the average speed of the Sun in its galactic orbit. To determine if a nearly inertial frame of reference can be located at the Sun, we need to consider the motion relative to the galactic center.
An ideal fluid flows through a pipe of variable cross section without any friction. The fluid completely fills the pipe. At any given point in the pipe, the fluid has a constant, What?
1. potential energy
2. velocity
3. pressure
4. total energy
5. kinetic energy
Answer:
4. total energy
Explanation:
According to Bernoulli's principle at any two points along a streamline flow The total energy that is sum of pressure energy , Kinetic energy and potential energy of the liquid all taken in per unit volume remains constant. Therefore,
for ideal fluid flows through a pipe of variable cross section without any friction. The fluid completely fills the pipe. At any given point in the pipe, the fluid has a constant Total Energy.
A circular test track for cars has a circumference of 3.5 kmkm . A car travels around the track from the southernmost point to the northernmost point.
-What distance does the car travel? (In km)
-What is the car's displacement from its original position? (In km)
Answer:
(A) Distance will be equal to 1.75 km
(B) Displacement will be equal to 1.114 km
Explanation:
We have given circumference of the circular track = 3.5 km
Circumference is given by [tex]2\pi r=3.5[/tex]
r = 0.557 km
(a) It is given that car travels from southernmost point to the northernmost point.
For this car have to travel the distance equal to semi perimeter of the circular track
So distance will be equal to [tex]=\frac{3.5}{2}=1.75km[/tex]
(b) If car go along the diameter of the circular track then it will also go from southernmost point to the northernmost point. and it will be equal to diameter of the track
So displacement will be equal to d = 2×0.557 = 1.114 m
A long string is stretched and its left end is oscillated upward and downward. Two points on the string are labeled A and B.At the instant shown, orient v(A) and v(B) to correctly represent the direction of the wave velocity at points A and B.At each of the points A and B, rotate the given vector to indicate the direction of the wave velocity.Figure:A string is attached and moving up and down
In an oscillating string, the wave velocity at a point on the string is oriented opposite to the direction of the string's movement at that point. Thus, if point A is moving up, v(A) is pointed down, and if point B is moving down, v(B) is pointed up.
Explanation:
The orientation of the velocity of the wave at points A and B is determined by the direction of the wave's movement. For an upward and downward oscillating string, the wave moves perpendicular to the string. When a segment of the string is moving upwards, the wave velocity at that point is downward, and vice versa.
So, if point A is currently moving upwards, then v(A) should be pointed downwards to represent the direction of the wave velocity. Similarly, if point B is moving downwards, then v(B) should be pointed upwards. The velocity vectors v(A) and v(B) are always opposite to the direction of string's movement at those points.
Learn more about Wave Velocity here:https://brainly.com/question/34190786
#SPJ3
When the ambulance passes the person (switching from moving towards him to moving away from him), the perceived frequency of the sound he receives decreases by 9.27 percent. How fast is the ambulance driving?
To develop this problem we will apply the considerations made through the concept of Doppler effect. The Doppler effect is the change in the perceived frequency of any wave movement when the emitter, or focus of waves, and the receiver, or observer, move relative to each other. At first the source is moving towards the observer. Than the perceived frequency at first
[tex]F_1 = F \frac{{343}}{(343-V)}[/tex]
Where F is the actual frequency and v is the velocity of the ambulance
Now the source is moving away from the observer.
[tex]F_2 = F\frac{343}{(343+V)}[/tex]
We are also so told the perceived frequency decreases by 11.9%
[tex]F_2 = F_1 - 9.27\% \text{ of } F_1[/tex]
[tex]F_2 = F_1-0.0927F_1[/tex]
[tex]F_2 = 0.9073F_1[/tex]
Equating,
[tex]F\frac{343}{(343+V)}= 0.9073(F\frac{343}{(343-V)})[/tex]
[tex]\frac{1}{(343+V)}= 0.9073\frac{1}{(343-V)}[/tex]
[tex]0.9073(343+V) = 343-V[/tex]
[tex](0.9073)(343)+(0.9073)V = 343-V[/tex]
[tex]V+0.9073V = 343-(0.9073)(343)[/tex]
Solving for V,
[tex]V = 16.67 m/s[/tex]
If the neutral atom of an element has only 5 valence electrons it must be in which group? 1. VIIA 2. VA 3. IVB 4. VIA 5. IVA 6. IIIA
Answer:
2. VA
Explanation:
The valency electron or outer electron of a neutral atom of an element determines the group at which an element belong. The electronic configuration of an atom that have valency of 5 can be represented as 2 5 , 2 8 5 etc.
The electronic configuration 2 5 represent Nitrogen atom while 2 8 5 represent phosphorus atom. The valency 5 depicts the element belongs to group 5A(VA).
This means atoms of valency electron of 3 belong to group IIIA, valency electrons of 4 belongs to group IVA, valency electron of 6 belong to group VIA and valency electrons of 7 belong to group VIIA.
This is a computer program, why is there an error between the computer values and the nominal values of R?
Answer:
the difference is due to resistance tolerance
Explanation:
In mathematical calculations, either done by hand or in a computer program, the heat taken from the resistors is the nominal value, which is the writing in its color code, so all calculations give a result, but the Resistors have a tolerance, indicated by the last band that is generally 5%, 10%, 20% and in the expensive precision resistance can reach 1%.
This tolerance or fluctuation in the resistance value is what gives rise to the difference between the computation values and the values measured with the instruments, multimeters.
Another source of error also occurs due to temperature changes in the circuit that affect the nominal resistance value, there is a very high resistance group that indicates the variation with the temperature, they are only used in critical circuits, due to their high cost
In summary, the difference is due to resistance tolerance.
Consider a steam power plant that operates on the ideal reheat Rankine cycle. The plant maintains the boiler at 17.5 MPa, the reheater at 2 MPa, and the condenser at 50 kPa. The temperature is 550°C at the entrance of the high-pressure turbine, and 300°C at the entrance of the low-pressure turbine. Determine the thermal efficiency of this system.
The ideal thermal efficiency for the steam power plant operating on the reheat Rankine cycle is approximately 57.0%.
To determine the thermal efficiency of the steam power plant operating on the ideal reheat Rankine cycle, we will follow the steps in the Problem-Solving Strategies for Thermodynamics:
Identify the Temperatures and Pressures
Boiler Pressure (P1): 17.5 MPa (High-pressure turbine inlet)
Reheater Pressure (P2): 2 MPa (Low-pressure turbine inlet)
Condenser Pressure (P3): 50 kPa
High-Pressure Turbine Inlet Temperature (T1): 550°C = 823 K
Low-Pressure Turbine Inlet Temperature (T2): 300°C = 573 K
Calculate Maximum Efficiency (Carnot Efficiency)
The maximum theoretical efficiency (Carnot efficiency) for a heat engine operating between two temperatures is given by the formula:
[tex]\eta_{max} = 1 - \frac{T_c}{T_h}[/tex]
where:
[tex]T_h[/tex] = Highest temperature (at the boiler, T1) = 823 K
[tex]T_c[/tex] = Lowest temperature (at the condenser) = Convert 50 kPa to temperature
Using steam tables or Mollier diagrams, the saturation temperature corresponding to 50 kPa is approximately 81°C = 354 K.
Now substituting:
[tex]\eta_{max} = 1 - \frac{354}{823} \approx 0.570 \text{ or } 57.0\%[/tex]
A positively charged particle initially at rest on the ground accelerates upward to 160 m/s in 2.10 s. The particle has a charge-to-mass ratio of 0.100 C/kg and the electric field in this region is constant and uniform.What are the magnitude and direction of the electric field? Express your answer to two significant digits and include the appropriate units.
Answer:
The magnitude of the electric field is [tex]8.6\times10^{2}\ N/C[/tex]
Explanation:
Given that,
Time t = 2.10 s
Speed = 160 m/s
Specific charge =Ratio of charge to mass = 0.100 C/kg
We need to calculate the acceleration
Using equation of motion
[tex]a=\dfrac{v-u}{t}[/tex]
Put the value into the formula
[tex]a=\dfrac{160-0}{2.10}[/tex]
[tex]a=76.19\ m/s^2[/tex]
We need to calculate the magnitude of the electric field
Using formula of electric field
[tex]E=\dfrac{F}{q}[/tex]
[tex]E=\dfrac{ma}{q}[/tex]
[tex]E=\dfrac{a+g}{\dfrac{q}{m}}[/tex]
Put the value into the formula
[tex]E=\dfrac{76.19+9.8}{0.100}[/tex]
[tex]E=8.6\times10^{2}\ N/C[/tex]
The direction is upward.
Hence, The magnitude of the electric field is [tex]8.6\times10^{2}\ N/C[/tex]
Answer:
E = 8.6 x 10² N/C
Explanation:
given,
initial speed of charge,u = 0 m/s
final speed of charge,v = 160 m/s
time,t = 2.1 s
charge-to-mass ratio = 0.100 C/kg
Electric field of the region = ?
Acceleration of the charge
[tex]a = \dfrac{v-u}{t}[/tex]
[tex]a = \dfrac{160 - 0}{2.1}[/tex]
a = 76.19 m/s²
specific charge = [tex]\dfrac{q}{m} = 0.1[/tex]
now,
Electric field,
[tex]E = \dfrac{F}{q}[/tex]
charge is moving upwards so,
[tex]E = \dfrac{(a + g)}{\dfrac{q}{m}}[/tex]
[tex]E = \dfrac{(76.19+9.8)}{0.1}[/tex]
E = 860 N/C
electric field , E = 8.6 x 10² N/C
hence, the magnitude of electric field is equal to E = 8.6 x 10² N/C
(II) At t =0, an 885-9 mass at rest on the end of a horizontal Spring (K: 184 N/m) is struck by a hammer which gives it aninitial speed of 226 m/s. Determine (a) the period and frequency ofthe motion, (b) the amplitude, (c) the maximumacceleration, (d) the total energy, and (e) the kinetic energy when x =O.4O A where A is the amplitude.
Answer:
A. T = 0.4358s and f = 2.29hz
B. A = 15.67m
C. amax = 3258.71m/s
D. amax = 22601J
E. Ek = 3616.16J
Explanation:
A. The period of the motion, T = 2pi*(sqrt(m/k))
Where m is the mass of the body in motion = 885g = 0.885kg
k = the spring constant = 184N/m2
T = 2pi*(sqrt(0.885/184))
= 0.4358s
Frequency of the motion, f = 1/T
T = 0.4358s
f = 2.2949hz
B. Maximum speed, Vmax = A*(sqrt(k/m))
Where A = amplitude of the motion
Making amplitude subject of formula,
A = Vmax(sqrt(m/k))
= 226*(sqrt(0.885/184))
= 15.6739m
C. Maximum acceleration, amax = A*(k/m)
= 15.6739*(184/0.885)
= 3258.71m/s
D. Total energy, Etotal = 1/2*(m * Vmax)2
= 1/2 * 0.885 * (226)2
= 22601J
E. Kinetic energy, Ek = Etotal - mechanical energy
Ek = 1/2*(k*A2) - 1/2*(k*x2)
Where x = 0.40A
Ek = 1/2*((k*A2) - (k*0.40A)2)
= 1/2*k*A2*(1 - 0.16)
= 1/2*k*A2*0.16
But 1/2*k*A2 = 22601J
Therefore, Ek = 22601*0.16
= 3616.16J
Assume this field is generated by a point charge of Q = 5 × 10-9 C. How far away is this charge located? Give your answer in meters.
Final answer:
The distance from the charge is 30 meters.
Explanation:
The distance from the point charge can be calculated using the equation E = kQ/r^2, where E is the electric field strength, k is the electrostatic constant (9 x 10^9 Nm^2/C^2), Q is the charge, and r is the distance. In this case, the electric field strength is the same at any point 5.00 mm away from the charge. Therefore, we can set up the equation as follows:
E = kQ/r^2
5.00 x 10^-3 m = (9 x 10^9 Nm^2/C^2)(5 x 10^-9 C)/r^2
By rearranging the equation and solving for r, we can find the distance:
r^2 = (9 x 10^9 Nm^2/C^2)(5 x 10^-9 C)/(5.00 x 10^-3 m)
r^2 = 900 m^2
r = sqrt(900 m^2) = 30 m
Therefore, the charge is located 30 meters away.
A(n) _________ is a line joining the points of equal magnetic declination. Contour line isohyet isotherm isomag isogonic line
Answer:
Isogonic line is a line joining the points of equal magnetic declination.
Explanation:
Isogonal line is a line that joins the places of equal declination. Also isogonal line is known as the line which connects the point having the same magnetic declination.
An isogonic line joins points of equal magnetic declination on a map. This is important for navigation, as it reflects the angle difference between true north and magnetic north. Isotherms, isohyets, and isobars are other types of isolines used in geography. Thus option 5. isogonic line is correct.
A isogonic line is a line joining points of equal magnetic declination. Magnetic declination is the angle between magnetic north (the direction the north end of a compass needle points) and true north. These lines are important for navigational purposes and are often shown on special maps known as isogonic charts.
Other types of isolines include:
Isotherm: connects points of equal temperature.Isohyet: connects points of equal precipitation.Isobar: connects points of equal atmospheric pressure.Understanding these different lines helps in various geographical and meteorological analyses, making it easier to interpret maps and forecasts.
Complete question.
A(n) _________ is a line joining the points of equal magnetic declination.
Contour lineisohyet line isotherm lineisomag lineisogonic lineAssume that you have a rectangular tank with its top at ground level. The length and width of the top are 14 feet and 7 feet, respectively, and the bottom of the tank is 15 feet beneath ground level. How much work W does it take to empty the tank by pumping the liquid back to ground level once the tank is full?
To solve this problem we will use the work theorem, for which we have that the Force applied on the object multiplied by the distance traveled by it, is equivalent to the total work. From the measurements obtained we have that the width and the top are 14ft and 7ft respectively. In turn, the bottom of the tank is 15ft. Although the weight of the liquid is not given we will assume this value of [tex] 62 lb / ft ^ 3 [/tex] (Whose variable will remain modifiable until the end of the equations subsequently presented to facilitate the change of this, in case be different). Now the general expression for the integral of work would be given as
[tex]W = \gamma A * \int_0^15 dy[/tex]
Basically under this expression we are making it difficult for the weight of the liquid multiplied by the area (Top and widht) under the integral of the liquid path to be equivalent to the total work done, then replacing
[tex]W = (62)(14*7)\int^{15}_0 (15-y)dy[/tex]
[tex]W = (14*7*62)\big [15y-\frac{y^2}{2}\big ]^{15}_0[/tex]
[tex]W = (14*7*62)[15(15)-\frac{(15)^2}{2}][/tex]
[tex]W = 683550ft-lbs[/tex]
Therefore the total work in the system is [tex]683550ft-lbs[/tex]
If y(t)y(t) describes the position with time, what is the proper formula for velocity with time? (Recall velocity is related to the derivative of position with time.)
Answer:
Although this question is not complete, I would give a general solution to this kind of problems.
If y(t) describes the position of a body with time such that
y(t) = at^(n) + bt^(m) + C
Then
V(t) = dy(t)/dt = ant^(n-1) + bmt^(m-1)
Explanation:
As an example supplies the position of a particle is given by
y(t) = 4t³- 3t² + 9
V(t) = 4x3t²- 3x2t¹
V(t) = d(t)/dt = 12t² - 6t.
Another example,
If y(t) = 15t³ - 2t² + 30t -80
V(t) = d(t)/dt = 15x3t² - 4t +30 = 45t² + 4t + 30.
Basically, in the equations above the powers of t reduces by one when computing the velocity function from y(t) by differentiation (calculating the derivative of y(t)). The constant term C (9 and 80 in the functions of y(t) in examples 1and 2 above) reduces to zero because the derivative of a constant (and ordinary number without the t attached to it) is always zero.
One last example,
y(t) = 2t^6 -3t²
V(t) = d(t)/dt = 12t^5 - 6t
A 372-g mass is attached to a spring and undergoes simple harmonic motion. Its maximum acceleration is 17.6 m/s2 , and its maximum speed is 1.75 m/s. a)Determine the angular frequency. b)Determine the amplitude. c)Determine the spring constant.
Answer with Explanation:
We are given that
Mass , m=372 g=[tex]\frac{372}{1000}=0.372 Kg[/tex]
1 kg=1000g
Maximum acceleration, a=[tex]17.6 m/s^2[/tex]
Maximum speed ,v=1.75 m/s
a.We know that
Maximum acceleration, a=[tex]A\omega^2[/tex]
Maximum speed, v=[tex]\omega A[/tex]
[tex]17.6=A\omega^2[/tex]
[tex]1.75=A\omega[/tex]
[tex]\frac{17.6}{1.75}=\frac{A\omega^2}{A\omega}=\omega[/tex]
Angular frequency,[tex]\omega=10.06 rad/s[/tex]
b.Substitute the value of angular frequency
[tex]1.75=A(10.06)[/tex]
[tex]A=\frac{1.75}{10.06}=0.17 m[/tex]
Hence, the amplitude=0.17 m
c.Spring constant,k=[tex]m\omega^2[/tex]
Using the formula
[tex]k=0.372\times (10.06)^2[/tex]
Hence, the spring constant,k=37.6 N/m
Final answer:
The angular frequency is approximately 7.686 rad/s, the amplitude is approximately 0.227 m, and the spring constant is approximately 6.5472 N/m.
Explanation:
To determine the angular frequency, we can use the formula:
ω = √(k/m)
where ω is the angular frequency in radians per second, k is the spring constant in Newtons per meter, and m is the mass in kilograms.
Given that the maximum acceleration is 17.6 m/s^2 and the mass is 372 g (or 0.372 kg), we can calculate the spring constant:
k = m * a
k = 0.372 kg * 17.6 m/s^2 = 6.5472 N/m
Now we can find the angular frequency:
ω = √(6.5472 N/m / 0.372 kg) ≈ 7.686 rad/s
To determine the amplitude, we can use the formula:
A = vmax / ω
where A is the amplitude, vmax is the maximum speed, and ω is the angular frequency.
Given that the maximum speed is 1.75 m/s and the angular frequency is 7.686 rad/s, we can calculate the amplitude:
A = 1.75 m/s / 7.686 rad/s ≈ 0.227 m
Therefore, the angular frequency is approximately 7.686 rad/s, the amplitude is approximately 0.227 m, and the spring constant is approximately 6.5472 N/m.
In a recent airline disaster, an airliner ying at 30,000ft,550mi/h, lost power and fell to Earth. The mass of the aircraft was 255,000 lb. If the magnitude of the work done by drag force on the plane during the fall was 2.96 × 106 Btu, estimate the velocity of the aircraft at the time of impact, in mi/h. Let g = 32.08 ft/s2.
To develop this problem we will apply the energy conservation theorem and the principle of work. Basically we will have that the kinetic, potential and work energy must be equivalent to the kinetic energy just before the impact. We will start converting the units given to the British system and then proceed with the Calculations.
Remember that according to the energy balance in this case it would be balanced like this
[tex]T_1 +\sum U_{1-2} = T_2[/tex]
[tex]\frac{1}{2} mv_1^2+mgh -W_{drag} = \frac{1}{2} mv_2^2[/tex]
Here
m = mass
[tex]v_{1,2}[/tex]= Velocity at each moment
[tex]W_{drag}[/tex]= Work by drag
h = Height
g = Acceleration due to gravity
Mass
[tex]m =255000 lb (\frac{1slug}{32.174lb})[/tex]
[tex]m = 7925.654slug[/tex]
Initial Velocity
[tex]v_1 = 550 \frac{mi}{h} (\frac{5280ft}{1mi})(\frac{1hr}{3600s})[/tex]
[tex]v_1 = 806.667ft/s[/tex]
Work by drag
[tex]W_{drag} = (2.96*10^6BTU)(\frac{778.169lb\cdot ft}{1BTU})[/tex]
[tex]W_{drag} = 2303380240lb\cdot ft[/tex]
By work energy principle
[tex]\frac{1}{2} mv_1^2+mgh -W_{drag} = \frac{1}{2} mv_2^2[/tex]
Replacing,
[tex]\frac{1}{2} (7925.654slug)(806.667ft/s)^2 +(7925.654slug)(32.08ft/s^2)(30000ft) -2303380240lb\cdot ft = \frac{1}{2} (7925.654slug)v_2^2[/tex]
Solving for [tex]v_2[/tex], we have that
[tex]v_2 = 1412.2 ft/s[/tex]
Converting this value,
[tex]v_2 = 1412.2 ft/s (\frac{1mi}{5280ft})(\frac{3600s}{1h})[/tex]
[tex]v_2 = 962.85mi/h[/tex]
Therefore the velocity of the aircraft at the time of impact is 962.85mi/h
To estimate the velocity of the aircraft at the time of impact, use the work-energy principle. The estimated velocity is 256.15 mi/h.
Explanation:To estimate the velocity of the aircraft at the time of impact, we can use the work-energy principle. The work done by the drag force is equal to the change in kinetic energy of the aircraft. The work done by the drag force is given as 2.96x10^6 Btu. We need to convert this energy into foot-pounds, and then use the kinetic energy equation to find the velocity. The equation is:
K = (1/2) mv^2
Where K is the kinetic energy, m is the mass of the aircraft, and v is the velocity. Rearranging the equation, we have:
v = √((2K) / m)
Plugging in the given values, we get:
v = √((2(2.96x10^6 Btu) * (3.968x10^8 ft-lbf/Btu)) / (255,000 lb * 32.08 ft/s^2)) = 256.15 mi/h
Therefore, the estimated velocity of the aircraft at the time of impact is 256.15 mi/h.